备件清单189_厦门纪扬科技有限公司

备件清单189

产品图片：
型号：1
品牌：进口
应用：工业设备
单价：￥1

产品图片：

产品描述：

燃料喷嘴安装垫片 314A5326P001

燃烧室端盖安装垫片 318A9713P073

燃烧室后法兰垫片 318A9713P024

火焰探测器垫片 324A9243P001（SOYO手册没查到）

火花塞安装垫片 324A9109P107

燃料喷嘴雾化空气法兰垫片 372A1159P009

雾化空气管环管前入口管段法兰垫片 N5606P04003G11

雾化空气母管垫片 N5606P06003

燃料喷嘴天然气法兰垫片 318A9701P004

天然气软管环管侧法兰垫片 5606P02006G11

天然气环管法兰垫片 N5606P05003G11

联焰管压环盘根 287A1614P004

进气反吹滤网 DONALDSON M0600

燃油伺服阀过滤器 HC9021FDT4Z

"砂滤Poro-Carbon

Tube" 121959

SCANcube, intellicube

The ultra-compact scan heads of the SCANcube series deliver

excellent dynamics and superior SCANLAB product quality in a

minimum-size package. The scan heads of the intellicube series

advantageously combine the features of the successful SCANcube

and intelliSCAN platforms.

Sealed against water and dust, the SCANcube’s and intellicube’s

robust and exceptionally compact housing facilitates straightforward

integration into production environments – even confined,

difficult-to-access locations. A wide variety of objectives can be

used with these scan heads.

SCANcube and intellicube scan heads bring success to applications

demanding very fast marking speeds and integration in the

tightest of spaces. Applications include packaging-industry coding

and marking of electronic components, i.e. market domains typically

served in the past by inkjet systems.

The intellicube is also ideal for applications requiring very high

dynamics or the acquisition of important status information.

Typical Applications:

• Marking and coding

• Semiconductor and electronics industry

• Processing-on-the-fly

SCANcube 7, 8.5 , 10, 14

Optics

SCANLAB precisely optimizes and tunes

all optical components to one another to

ensure maximum focus quality and stable

process parameters. Optical components

offered by SCANLAB include compact

objectives, as well as objective mounts

for standard objectives. Optics for various

wavelengths, power densities, focal

lengths and image fields are available.

Control

SCAN cube scan heads are equipped

with either an analog or a digital standard

interface accessible via a 25-pin D-SUB

connector.

They are easily controlled via SCANLAB’s

RTC PC interface board or the PC-independent

RTC SCAN alone board from

SCANLAB.

intellicube scan heads are equipped with

a digital standard interface. They are easily

controlled via SCANLAB’s RTC4 or RTC5 PC

interface board. Scan head diagnosis and

all essential configuration parameters are

controlled via software commands.

Options

• For optical process monitoring,

SCANLAB offers a camera adapter.

all dimensions in mm

Dimensions SCANcube

Aperture 7 mm 8,5 mm 10 mm 14 mm

Beam displacement 9.98 mm 10.17 mm 12.54 mm 16.42 mm

SCAN cube 7 Beam entrance side

Beam exit side with

SCAN cube 10

Beam exit side

42.52

M79 x 1

(5 deep)

16.42 Beam in

43.58

Beam exit side

99.5

105.5

133.5

SCAN cube 14

SCAN cube 8.5 Beam entrance side

Beam exit side

Ø13.8

39.5

22.41

Beam entrance side

42.52

43.46

M79x1

(6 deep)

12.54

Beam in

22.41

40.5

Ø9.8

Beam entrance side

Beam in

10.17

32.69

29.95

M55x1

(6 deep)

29.38

12.9

Ø8.5

Beam in

9.98

32.5

29.64

M55x1

(6 deep)

14H7

(4 deep)

Ø6.8

12.9

29.38

114

96.5

82.1

90.5

69.5

77.9

78.5

intellicube 10, 14

SCANcube or intellicube?

The intellicube and SCAN cube are electrically

and mechanically inter-compatible.

In addition to the 10 and 14 mm apertures,

the SCAN cube series also offers extremely

compact scan heads with 7 or 8.5 mm

apertures. Further the SCAN cube can be

equipped with either a digital or an analog

interface.

The intellicube provides improved dynamic

performance. And as a direct beneficiary

of SCANLAB’s years of experience developing

digitally controlled intelliSCAN scan

systems, the intellicube also offers all the

advantages of iDRIVE technology: high

flexibility, superior dynamics, real-time monitoring

of actual position and advanced

status information, etc.

intellicube scan heads are available with

vector-tuning or step-tuning.

Quality

The high quality of SCANLAB’s scan solutions

is the result of years of experience

in the development and manufacture of

galvanometer scanners and scan systems.

In addition, every scan system must first

pass the SCAN check burn-in test before it

is released for shipment to the customer.

The housing dimensions of intellicube 10 and 14 are identical to

SCANcube 10 and 14.

all dimensions in mm

Dimensions intellicube

Aperture 10 mm 14 mm

Beam displacement 12.54 mm 16.42 mm

Beam exit side

42.52

M79 x 1

(5 deep)

16.42

Beam in

43.58

Beam exit side

99.5

105.5

133.5

42.52

43.46

M79x1

(6 deep)

12.54

Beam in

114

96.5

22.41

40.5

Ø9.8

Beam entrance side

Ø13.8

39.5

22.41 Beam entrance side

intellicube 10

intellicube 14

Legend

1 Beam in

2 Connector

3 Beam out

SCANLAB America, Inc. · 100 Illinois St · St. Charles, IL 60174 · USA

Tel. +1 (630) 797-2044 · Fax +1 (630) 797-2001

info@scanlab-america.com · www.scanlab-america.com

SCANcube, intellicube

SCANLAB AG · Siemensstr. 2a · 82178 Puchheim · Germany

Tel. +49 (89) 800 746-0 · Fax +49 (89) 800 746-199

info@scanlab.de · www.scanlab.de

Common Specifications

(all angles are in optical degrees)

Dynamic performance

Repeatability (RMS)

< 2 μrad

Offset drift

< 30 μrad/K

Gain drift

< 80 ppm/K

Long-term drift over 8 hours

< 0.3 mrad

plus temperature-induced gain and offset drift

Optical performance

Typical scan angle

±0.35 rad

Gain error

< 5 mrad

Zero offset

< 5 mrad

Nonlinearity

< 3.5 mrad / 44°

Power requirements

±15 V DC,

max. 3 A each

(SCANcube 7 max. 2 A)

Interface

Analog version (SCANcube)

±4,8 V

Laser Marking Heads (Laser Scanners, Scan Heads) A whole laser marking head (or called laser scanner) consists of two scan mirrors, two

galvanometers (or called galvo-scanner motor) & drive cards (or called driver), a XY mount, a

scanning lens (f-theta lens), an interface card (or called D/A card), a set of marking software and a

DC power supply.

Basics of 2-axis laser scanners

A laser beam is reflected from two scan mirrors in turn, and directed through a focusing lens. The

mirrors are capable of high speed deflection about a rotation axis, being driven by a galvo-scanner

motor. In most cases the maximum deflection angle of the mirror is ±12.5° (often ±10° is a safer

l imit) either side of the non-deflected incidence angle of 45°.

Note that, for best performance, the lens will appear to be ‘the wrong way round’ when compared

fwoicthu sain gs otaf nad laarsde rm beenaimsc. us lens used in conventional

Some of the design objectives in specification of 2-axis

laser scanners are:

? Achievement of desired scanned field size

? Maximization of scan speeds

? Minimizing focused spot sizes

? Lowest cost solutions

Some of the limitations to be considered are:

? Quality factor Q (Q = M2) of the laser beam

? Scan angle limitations

? Loss of power due to beam-clipping

? Physical aperture of the scanner head

Field of scan

The laser beam will be scanned over an angle ?, equal to twice the mirror deflection angle. So, the

typical scanned field might be ?=±20° in both X and Y directions. (?=±25° would be the usual

maximum scanned field). The field size is then approximately 2Ftan?? in both X and Y.

The approximation arises because:

1) it is usually desirable to have a deliberate distortion characteristic in the scanner lens design so

that the field position is proportional to ?, not tan?.

http://www.sintec.sg .sg 2

2) scanning in two axes produces a geometrical distortion which is unrelated to the lens properties.

Focused spot size

The lower limit on spot size ‘d’ (1/e2 intensity diameter) for a laser beam of diameter ‘D’ (1/e2) is:

d = 13.5QF/D ?m

Example: A TEM00 beam (Q=1) of 13.5mm (1/e2) diameter, focused by a perfect lens of 100mm

focal length, will form a focused spot of 100?m diameter. (Taking a more realistic value of Q=1.5,

the spot size would be 150?m).

Beam clipping and optical aberrations can lead to focused spot sizes which are larger than the

minimum diffraction limited value found from the equation above.

Large field sizes demand the use of lenses of long focal length. In turn, this leads to increased

focused spot size unless the beam diameter, mirror sizes, and lens diameter are all increased.

Spot sizes are given in the form of an average spot size over the whole, maximum, field-of-scan. A

second figure, the standard deviation from average spot size, gives a measure of variation of the

spot size to be expected over the field.

Beam clipping

The physical aperture of a laser scanner is often limited by a circular aperture of the scanner head,

of diameter ‘A’ mm, say.

Beam clipping can occur at a circular aperture, even for a well-centred beam, when the ‘tails’ of the

beam energy distribution is blocked by the metalwork. The percentage power loss at a circular

aperture, for a TEM00 beam (Q=1) is shown in the following table:

Table: Power Loss

A/D 0.8 1 1.2 1.4 1.6 1.8 2

Loss % 27.8 13.5 5.6 1.98 0.6 0.15 0.03

The table indicates that, where the physical aperture of the scanner is limited to A mm diameter,

the laser beam diameter D (1/e2) must be selected by a compromise between reduced spot size

and power loss due to beam clipping. A value of D = A/1.4 would probably be acceptable for most

laser scanner systems. Power loss due to beam clipping increases for de-centred beams.

Mirror design

Mirror (1) (or called Scan Mirror X)

The width of mirror (1) is determined by the beam diameter. It is easier to discuss this in terms of a

‘full beam diameter’ DF, where the definition of full diameter is, to some extent, arbitrary.

For example, a system designer might define DF as the measured diameter of a beam print in

perspex [plexiglass]. Alternatively, DF may be the measured 99% power points, or perhaps a value

chosen in the range 1.4D to 1.6D.

Tmhisea mliginrrmore nwti.d Tthh eW le1n gist hs loigf hmtliyr rolarr g(1e)r isth daent etrhme inseedle bctye tdh ev amluaex imof uDmF ,a snugflfeic oief nint ctiod eanllcoew i for minor max on the

‘mchiraromr.f eLrse’t o?n= s c(9a0n°n-eimr amx).i rrTohres na rteh ed emteirrrmoirn eledn gbtyh thise Ls1e,p awrahteioren , LS11 ,= b Wetw1/eseinn? m. iTrrhoers la(1rg) ea nsdh a(2p)e;

the scan angles, and the need that the mirrors should not collide during scanning.

Mirror (2) (or called Scan Mirror Y)

http://www.sintec.sg .sg 3

The width of mirror (2), W2, should be identical to the length of mirror (1). The length, L2, of mirror

(2) is found from projection of the beam onto the second mirror at a distance of S1, and at

maximum scan angle ?. These mirrors are built and coated specifically for use with CO2 or YAG

lasers. They have a very high laser damage threshold, measured at 1000W/mm of 1/e2 beam

diameter (D).

F-theta characteristic

Lenses described as being ‘F-theta’, or ‘F?’, type are designed so as to produce an off-axis spot at

a location proportional to the scan angle. In turn, this may be directly proportional to a voltage

applied to the galvo scanner motor. (A lens with zero distortion would form a spot at a field location

of Ftan?). No 2-axis galvo scanner can have a true F-theta characteristic, due to distortion from

use of two mirrors. Single-element lenses are designed to be the best compromise between

smallest spot size and F-theta characteristic. Errors in F-theta characteristic are usually 2% - 3%

for these single element lenses. Multi-element lenses allow design freedom enabling a closer

aFpLp tryopaec hha tvoi nFg- tah estlaig phtelyrf ogrrmeaatnecr ev.a Flu?e .e rrors <0.36% are typical for this range, with only the 75mm

Lens design

All scanning lens designs are based on factors described above. For typical small scanner

sbyesetne mfosu, nlidm titoe db eto spueitrahbalep.s F1o0rm 1m5 momr 1 b5emamm sfu, llt hbise alemn sd iasimzee teisr , olnelnys epso sosfi b4le8 mbmy mdiianmimeitzeinr gh athvee

distances S1 and M2L. Each class of lens is designed for use with a specific range of beam

diameters, and, more importantly, for a specific set of values S1 and M2L.

In each case the lens is designed to provide the best compromise performance for flat field, spot

size and F-theta characteristic for the specified beam diameter and mirror locations, while avoiding

beam-clipping at the lens mount.

For certain (longer focal length, single-element) lenses it is possible to obtain an improvement in

dpiearmfoermtear n(tcoe abvyo iidn cbreeaamsi ncgli pthpein gd)is. tance M2L. This necessitates the design/use of lenses of larger Marking software

aTuhteo mWatiendd owse-briaesse dn ummbaerkrsin, gb asrocfotwdeasre &s uDpaptoarMtsa trvixa.r ioTuhse fuosnetsrs, pcaicntu reeass il(yP LuTs,e DAXutFo,C ABDM Po)r,

CorelDraw to design their patterns. They also can scan photos or logos and then use marking

software to mark. How to Properly Select Marking Head, Beam Expander, Scan Mirror, F-theta Lens and Laser

Hmearxeim lausmer a blleoawme dd iianmpuett ebre iasm D d1i,a bmeeatmer doifa msceatne rm aifrtreorr sb eisa Dm3 e, xmpaaxnidmeur mis aDll2o,w beeda minp euxtp baenasmio nd iraamtioe tiesr T ,

of marking head is D4, Entrance pupil of f-theta lens is EP. D3 ? D1?T or D4 ? D1?T or EP ? D1?T

pMraorpkoinrtgio fniealld t ois f porcoapl olerntiogntha l( otor wfoocrakli nlegn dgitsht a(onrc ew)o. rking distance) and focused beam diameter is also

Part Number Description of Marking Head

Description of Part Number: LSxx-xxxx-yy-AAAA

xLxSxxxx:: lalasseerr wsacavenlneenrg. txhx. m eans series marking heads such as CT, SL, LC, JC.

yy: maximum input laser beam diameter.

AAAA: notes or remarks

http://www.sintec.sg .sg 4

Part number Max entrance

dia. mm

Model of

galvo

Dimension

LxWxH,mm Control

LSCT-xxxx-12-6230 12 CTI-6230 165x125x125 Analog input

LSCT-xxxx-12-6231 12 CTI-6231 165x125x125 Analog input

LSSL-xxxx-7-XS 7 OSSL-XS 79x69x78 XY2-100

LSSL-xxxx-10-S 10 OSSL-S 115x97x94 XY2-100

LSSL-xxxx-10-BC10 10 OSSL-S 106x91x91 XY2-100

LSSL-xxxx-14-M 14 OSSL-M 134x100x106 XY2-100

LSLC-xxxx-10-DIGI 10 115x97x97 XY2-100

LSJC-xxxx-10-2206 10 119x97x94 XY2-100

LSJC-xxxx-14-2208 14 126x98x105 XY2-100

eAnll tarabnocvee dmiaamrkeintegr sh eaavdasila cbalen uoppoenra rteeq aute 1s0t.6 P4nlemas, e5 3c2onnmta,c 3t 5u5sn fmor omr o1r0e. 6inufmor mwaatvioenle. ngth. Other

Remark:

? The marking field of marking head depends on the f-theta lens. In general, it is 105x105mm (CO2

laser) or 110x110mm (Nd:YAG laser). Other mark fields are available upon request. In order to

vhaarvieou bse aspt pmlicaarktiionngs r.e sult, you may prepare a few f-theta lenses with different mark fields for your

? lTehnes , folacsuesre db ebaemam p adriaammeetteerr sduecphe nadss boena mthe d oiapmticeatel rs yasntde mb esaumch d aivse rbgeeanmce e xapnagnled,e ar nadn dm fa-trhkeintag

parameters such as marking speed and material.

? All above analogue marking heads can be converted into digital marking heads via a D/A convertor.

http://www.sintec.sg .sg 5

LSSL Series Laser Marking Heads Portable size, Fast speed, High accuracy

LSSL-7-XS, -10-S & -14-M LSSL-10-BC10 Typical Fields of Application:

?-> Marking in the packaging sector

?-> Semiconductor industry

?-> Electronics industry

sLuSpSeLr iosre prireosd ulacst eqru amliatyr kiinn ga hmeiandim iusm a-sni zeu ltpraa-cckoamgpea. cTt heo nseo lwidh picehr fodremliavenrcse eoxf ctehlele nmt adrkyinnagm hiecas das nids

made possible by the new, miniaturized servo amplifiers and industry-proven OSSL series

galvanometer optical scanners. Aperture of 7, 10 and 14mm are available.

sSteraailgehdt foargwaainrds t inwteagtreart ioann din tdou psrt,o dtuhcet ioLnS eSnLv irroonbmuset ntasn-edv eenx cceopntfioinneadl,ly d icffoicmulpt atcot- ahcoceusssin glo cfaatcioilnitast.e As

wide variety of objectives can be used with these scan heads.

Versions with analog or digital interfaces are available. The digital version can be simply controlled via

a PCI interface board or PC-independent standalone board. LSSL scan heads are ideally suited for

csoolduitniogn isn rtehqeu piraincgk avgeirnyg hinigdhu smtrayr koirn gth sep meeadrksi nagn do fi netleegcrtarotinoinc icno mcopnofnineendt ss p–a acreesa. sA tprapdlicitaiotnioanllsy isnecrluvedde

b y inkjet systems. Optics

aWned psretacbislee lyp roopcteimssiz ep aanradm tuenteer sa.l Ooppttiiccaall ccoommppoonneenntsts t oo offneere adn obtyh eur st oi necnlsuudree mexacxeimptuiomn afollyc ucso qmupaalictyt

dobejnescittiiveess, ,f oacsa wl leenll gatsh so bajnedc tiimvea gaed afipetledrss aforer satvaanildaabrlde .o bjectives. Optics for various wavelengths, power Control

LSSL marking heads are equipped with either an analog or a digital standard interface accessible via a

25-pin D-SUB connector. They are easily controlled via PC interface board or the PC-independent

standalone board from us. Quality

gTahlev ahniogmh etqeura oliptyt iciasl sthcea nnreesrus lta nodf syceaanr ss yosft emexsp.e Irnie andced itiionn ,t heev erdye vseclaonp msyesntte ma nmd umst afnirusft apcatusrse thoef

quality check burn-in test before it is released for shipment to the customer. Common Specifications (all angles are in optical degrees)

Dynamic Performance

Repeatability < 22μrad

Offset drift 30μrad/K

Gain drift 80ppm/K

http://www.sintec.sg .sg 6

Long-term drift over 8

hours

< 0.3mrad, plus temperature induced gain and

offset drift

Optical Performance

Typical scan angle ±0.35rad

Gain error < 5mrad

Zero offset < 5mrad

Nonlinearity < 3.5mrad

Interface Analog version ±4.8 V

Digital version XY2-100 standard

Operating Temperature 25 °C ± 10 °C

Product-Dependent Specifications (all angles are in optical degrees)

Part number LSSL-xxx-7-XS LSS SL-xxx-10- LBSCS1L0- xxx-10- LMS SL-xxx-14-

Aperture 7mm 10mm 10mm 14mm

Beam displacement 9.98mm 12.54mm 12.54 16.42mm

TDryancakminigc ePrerorfro rmance 0.14ms 0.18ms 0.14ms 0.30ms

Step Response Time

(1s%et tolifn fgu ltlo s 1ca/1le0 00 of full scale)

10% of full scale

0.30ms

0.70ms

0.40ms

1.2ms

0.35ms

1.0ms

0.65ms

1.6ms

Typical speeds

PMoasrkitiionngi nspge sepde e d

qWuraitliintyg speed with good writing

Writing speed with high writing

quality

12.25.m0m/s/ s

900cps

600cps

27..00mm//ss

640cps

400cps

12.25mm/s/s

800cps

570cps

17..00mm//ss

410cps

280cps

Power Requirements ±15VDC

max. 2A each

±15VDC

max. 3A each

±15VDC

max. 3A each

±15VDC

max. 3A each

Weight (without objective) 650g 1.9kg 1.5kg 2.3kg

http://www.sintec.sg .sg 7

http://www.sintec.sg .sg 8

URL: E-mail: 9

Laser Marking Dual-Heads

Dual-head using 2pcs single LSSL marking heads

Dual-head laser marking head consists of two individual single marking heads and a beam splitter. A

lsaysseter mbe. aTmhe ne nthteer st wthoe l adsuear lb-heeaamds l awsilel re nhteeard t haen tdw oth einnd iivsi dduiavli dseindg ilnet om atwrkoin lga sheera bdes,a mress pveiact iavenl yo. pTtihces

dual-head marking head is controlled by a specific software and the two single heads can be operated

rseyqnucihrero hnioguhs slyp eoer din adnedp leanrgdee nmtlya.r kTinhge fdieulda.l -head marking heads are suitable to the applications which

The specifications of the dual-head marking heads are same as the specifications of the single marking

hheeaadd except the doubled marking fields. For example, the marking field will be 200x100mm if the single ’s marking field is 100x100mm.

We can supply the dual-head marking heads operating with CO2 lasers, Nd:YAG lasers and fiber lasers.

URL: E-mail: 10

LSLC Series Scan Heads & Software

Digi-Cube II is the new intelligent, self tuning digital Laser Scan Head

with the technologically advanced digital processor

Digi-Cube II has been designed for easy OEM design integration and plug-and-play replacement for existing analogue scan heads with industry standard mechanical bolt patterns, industry standard power and communication

pinouts as well as a range of popular apertures, mirror coatings and lenses. The Digi-Cube II uses XY2-100

Communication Protocol as standard.

Other digital scan heads available on the market, which are many times more expensive, cannot begin to the

mmaotdcehl sp arincde iat’nsd a lpseor fIoPr5m5a rnacteed o. f the Digi-Cube II. In fact this new Laser Scan Head costs less than most analogue

The Digi-Cube II operating system uses DSP technology to rapidly compute and predict the exact drive impulses

required to achieve small mirror movements with the fastest possible acceleration.

Ithn ef alacwt tsh eo fo pnhlyy sthicisn.g O thnacte r tehsetr iDctisg i-thCeu bsep eIIe ids oswf tihtceh egda lvoann, oitm peetrefor r(m asn a i mdeptraeislesdiv see 1lfK d iiamgpnroessissi oannsd pseyrs tseemco cnhde c) ka rteo

determine the operating parameters of the individual galvos. This ensures the accuracy and positioning of the laser

marking is precise and error free – something that cannot be guaranteed with analogue models which often have to

undergo complicated manual recalibration procedures after prolonged use. This is particularly important in the

marking of components in the semi-conductor industry where positional accuracy is paramount. If speed, accuracy,

cost-effectiveness and long term reliability are your requirements –– the Digi-Cube II is the intelligent choice.

Improved Performance

Where marking time is limited by galvo performance, rather than laser power, a 50% to 100% speed improvement

could be expected.

Benefits

? Increased productivity with significantly faster scan speeds

? Fits easily into any new or existing production line

? ‘Plug-and-Play’ system simplifies installation and compatibility

? analoMguuech s cloawn ehre haeda t generation than other DSP scan heads, the Digi-Cube runs as cool as a typical

? Improved dynamic performance

? Fast ‘On the Fly’ processing

URL: E-mail: 11

? Small mirror moves without waiting for feedback

? Simpler and faster set-up

? Scale & offset pot only

? Most cost-effective and unbeatable method of increasing performance of your scan heads

? Automatic tuning checks when powered up

? Compatible with analogue scan heads using the XY2-100 protocol

? Reduced temperature drift

? waterR obust IP55 rated case for protection against particle ingress and a good level of protection against

Improved Field Serviceability

As the Digi-Cube has self tuning technology it is now possible to replace just the scanners or the mirrors. This

eliminates the expense of either calling out a service technician to tune in replacements or the need to return the

scan head to base.

This saves both time and money – and enhances your system’s reputation and decreases downtime for your

customers.

Typical applications

? High Accuracy Laser Marking

? Scribing / Engraving

? Welding

? Photovoltaic Production

? Trimming

? Rapid Prototyping

? On the Fly Processing

? Laser 3D Printing

? Scanner Control Systems in medical equipment

DigiCube II Specifications ( DSP controlled 10mm XY Scan Head )

Laser wavelength 1064nm

Beam entrance diameter 10mm

Power supply requirement +24/-24V 4A

Maximum current drive to galvo 10A

Quiescent power draw ( no marking ) <10W

Positioning speed m/s 10 - 20

Marking speed m/s 3 - 6

Precision writing cps 500

High quality writing cps 1000

Resolution urad 10urad

1% step response setting to 0.1% fs 0.28ms

Scale drift ppm/C <40

Zero drift urad/C <10

Linearity % 99.9

Short term repeatability urad <8

Dither RMS <10urad

Weight 2.2kg

Dimensions A97MM, B115mm, C97mm,

D15mm, E30mm, F90mm

URL: E-mail: 12

DIGI-STRUCT Laser Marking Controller

? Increases productivity & flexibility

? Saves time & material

? Easier to customise

? Minimises downtime

? Eliminates programming error and interference with laser marking

The laser marking controller consists of E1701D scann er controller baseboard plus optional extension boards. The E1701 scanner controller boards are designed for controlling galvanometric scanner systems

with two or three axes. Depending on the used extension boards (which are optional) they also supply

extensive signals for laser and external control. The communication between the host system and the

controller boards is done via Ethernet or USB.

When using E1701 scanner controller boards, there is always one

baseboard required for proper operation.

This baseboard can be used together with different extension boards that

provide additional signals for

controlling the laser marking process. These extension boards are optional

and have to be used only in

reenqvuiriorendm. eSnot sd wepheenred itnhge oand udsiteiodn atyl pseig onfa llass perro acnedss reedq ubiyre tmheesnets b, othaerd s are

minimal solution to control a laser marking system may consist of the

baseboard only.

Normally extension boards can be combined with any baseboard and all other extension boards freely, there

are no restrictions for usage. In case some specific extension board types can’t be operated with other

boards, Normally an E1701 baseboard can be combined with several extension boards of different types but

not with more than one board of same type. In case of special extension boards where more than one board

of the same type can be used, this is stated in description of the related boards below.

URL: E-mail: 13

E1701D XY2/100 Digital Laser Scanner Controller Baseboard

This baseboard can be used to control 2D or 3D scanheads that come with a XY2/100 interface. It can be

combined with extension boards without any restrictions. E1701D offers following features:

? XY2/100 interface to scanhead with X, Y and Z channel

? 100 Mbit Ethernet connection

? USB 2.0 connection

? online XYZ grid correction with support for several correction table file formats (like SCAPS(tm) .ucf,

? Scanlab(tm) .ctb and .ct5, Raylase(tm) .gcd)

? switching between up to 16 grid correction tables during marking process

? high-definition online XYZ grid correction with BeamConstruct HD correction files (.bco)

? 10 microseconds vector cycle time and resolution (microstep period)

? command execution time down to 0,5 microseconds

? realtime processing of laser and scanner signals

? 26 bit internal resolution (for better quality also with 16 bit hardware output)

? can control nearly every laser type (this may require extension boards as described below)

? two laser CMOS digital outputs for usage with YAG, CO2, IPG(tm), SPI(tm) and compatible laser types

? (outputs can provide PWM frequency, Q-Switch, FPK-pulse, CW/continuously running frequency,

? stand-by frequency) running with frequencies of up to 20 MHz

? 512 MByte DDR3 RAM

? 1 GHz CPU clock

? support for Micro-SD and Micro-SDHC cards

? internal command and vector data list with more than 20 million entries

? continuous list concept, no need to swap between lists

? BeamConstruct PRO license included

? open source compatibility library that emulates existing programming interface for fast and easy usage

? with existing software (contains e.g. Scanlab, RTC4), SCAPS, USC/SCI and other compatible interfaces)

E1701 LP8 Extension Board

This board can be used to provide signals for controlling a wide range of laser types. It offers following

features:

? LP8 8 bit CMOS level parallel digital output e.g. for controlling laser power

? LP8 latch CMOS level digital output for usage with IPG(tm) and compatible laser types

? Master Oscillator CMOS level digital output for usage with IPG(tm) and compatible laser types

? 8 bit 0..5V analogue output e.g. for controlling laser power (this output is a slave of LP8 outputs)

? two laser CMOS level digital outputs for usage with YAG, CO2, IPG(tm), SPI(tm) and compatible laser

? types (outputs can provide PWM frequency, Q-Switch, FPK-pulse, CW/continuously running

? frequency, stand-by frequency) running with frequencies of up to 20 MHz

E1701 Digi I/O Extension Board

This board provides additional digital in- and outputs for synchronisation and communication with external

equipment. It offers following features:

? 8 freely usable digital outputs providing either CMOS level or electrically insulated outputs via

? external power supply

? 8 freely usable digital inputs expecting either CMOS level or electrically insulated inputs via external

? power supply

? 2 digital inputs usable for quadrature encoder signals for marking on-the-fly applications

E1701 Secondary Head Extension Board

Using boards of this type additional heads can be connected which then work in parallel to the first scanhead

of E1701D baseboard. So as only output it provides an additional XY2/100 connection.

The Digi-Struct is feature rich software platform that provides a user-friendly layout with an easy-to-use and

powerful toolset for the creation of laser marking programmes and control of Digi-Cube laser scan heads to further

maximise productivity and reduce production costs

A vast array of different one d imensional and two

dimensional codes are available from installation

including QR codes, Datamatrix UPC and EAN.

Supports TrueType fonts, including Unicode,

and a variety of different script styles.

Fulfils the demands of an ever more globalised

identification and labelling market. Digi-Struct also

URL: E-mail: 14

comes with 11 different laser vector fonts providing legible characters in the fastest possible timeframe.

A large number of different date and time options are

available.

Provides the ultimate flexibility of date and time coding while

remaining simple to use through a date/time wizard.

Customisable date/time strings can also be made using a list

of easily entered commands with minimal syntax.

Provides a variety of line styles, giving you full control of

the laser marking process.

Perforation of pieces can be achieved by a few clicks of a

mouse and custom line styles are available to perform specific

tasks.

Supports images and artwork in a variety of standard

formats including .dxf and .svg.

Makes adding logos and images to products quick and easy.

With no tooling to consider, brands and logos can be changed,

TThhies aguivteosm yaoteud t htees bt emsat tproixs smibalek ecso tnhtrea sfitn ues tiungn inthge osfh yoortuers tm aamrkosu nfat sotfe tri maned a enads uiesrin. g as little material as

possible.

By utilising the automated test matrix tool, a number of different effects created by the laser source can be

marked on to a single swatch of sample material and can easily be identified and refined using the grid within

the automated test matrix.

3D capabilities allows for subtractive 3D printing( removing material instead of adding ).

Utilises a versatile ‘Slicing’ system, breaking down a complex 3D project into easy-to-handle 2 dimensional

layers.

Scan Head Controller – Software Board & Extension Boards

oCuotmpubti.n eTsh ias paollwowersf ulla 1sGerH zO EprMoc’se stoso rin oteng raa tceo mthpea csto pftlwataforerm i nwtoit ht hae isr cacularbrelen ta rdcehsitiegcnt upriep ealninde loewa stihlye ramnadl

efficiently.

YAG and CO2 lasers are supported out of the box, whilst the easy-to-connect extension boards can be

added to interface with fibre laser sources such as IPG®, SPI®, iLuma®, Raycus and all other commercially

available laser sources.

The Digi-Card sports a 100Mb Ethernet connection allowing for the rapid transfer of data between a PC and

the laser control software which is stored on the 4GB micro SD card containing all the laser marking

programmes. The programmes can then be selected by software commands or by utilising the I/O expansion

board.

Control Box

cArne aetaesdy o-tno -au sLea pfetoaptu orer Dofe tshket oDpi gcio-Smtpruuctet rS. oftware allows up to 254 different laser marking programmes to be

These programmes can then be downloaded on to a micro SD card and inserted into the Digi-Link Control

Box.

When the Digi-Card Scan Head Controller Board is connected to the Digi-Link it allows the user to select the

appropriate programme and externally control laser stop/start functions, removing the need for a

Laptop/Desktop on the shop floor -saving time, eliminating programming error and preventing any

unauthorised access or interference with the laser marking.

The Digi-Link control box can also receive instructions via an Ethernet connection allowing full factory

integration.

URL: E-mail: 15

Marking Card and Marking Software

Our marking software has been designed to meet the needs of all types of users of laser marking

systems. The software was developed to be a retrofit package for existing systems, or as original

csoofnttwroalr es yosnte nmesw, swyhsitlee mresm. Tahinein pga eckxatrgeem perlyo vuidseesr- fsriiegnndifilcya. nItt's a adnva onbcjeemcte onrtise notveedr, pgrreavpiohuicsa lllays ienrt emraacrktiivneg,

PC control system providing a user the ability define and execute laser marking jobs. Multiple hardware

interfaces are supported giving the software the ability to control most Nd:YAG and CO2 laser marking

systems.

Unlike some marking software, the operator never has to remember what fonts and logo's need to be

lsooafdtweadr ef odr oae sp naortti cruelqaur irjeo bu. sTehrse tos olfetwaranr ea nayu tpormogartiacmalmly inpge rlfaonrgmusa gaells roerq usipreedc iagl racopdheics ,l oaanddin yge. t Tthhee

software provides all of the flexible, graphic control users are accustomed to, including radial marking,

faixsepde cot rc ovnartriaobl, lec.h aVraarciatebrl es pteaxcti ncga, na nbgeu rlaert rireovtaetdio nast , ruanntdim feu llf rjoumst ifaic avtaiornie.t yT eoxf t stoou brcee sm ainrckleudd incga,n tbhee

iknecylubdoeadrd a, sa vbaarria cboled ete rxet atydpeer,s a. nFdo ndtiss kin fcilleusd.e lAausteorm eantgicra dvainteg cfoondtisn ga nadn dW ainlpdhoawn’su mTreureic Tsyepriea lfioznattsio. nT aruree

Type fonts can be vector filled using user specified density, angle and kerf. Graphics (sometimes called

f"eloagtuor'se"s o anr eo tehitehre sr ymsteenmus c) ocnatnro blleed i morp gorratepdh ifcroamlly ac olanrtgroel levda rvieiaty t hoef cmoomumseo na nvde ckteoyrb fooarmrda. ts. All graphic

(Tshuec hs oafstw lianree, creacnt acnregalete, rvoaurniodu-sco orbnjeerc rtes cstuacnhg laes, pboalrycgoodne, ,c Diracltea,M ealltirpixs,e t eextct,) ,s cimomplpel egxe ogmraepthriicca ol bojbejcetcst s

(such as PLT & BMP files), automatic date coding and alphanumeric serialization.

aTnhde rLeM aCre s tehrrieees .t yLpMeCs ocfa mn aorpkeinragt ec awrdiths (Winitnedrfoawcse7 c baurdt so)t haenrds rcealenv naontt. software: LMX series, LMM series 1. LMX Series Cards and Software

LMX Marking Control Card is especially developed for scan head

and laser control in real time with a PCI bus interface. It is used

with cor responding software to control laser marking.

● 2 analog output ports ( for scan head );

● 1 laser switch signal(TTL);

● 1 PWM signal(TTL);

● 9 digit input signals;

● 4 output signals(relay output);

● 2 differential mode axes control for step/servo motor;

● 1 single ended mode axe control for stop/servo motor;

DB37: Pin Assignments

No. Name Description Characteristics

1 CP1+ 1st pulse+ signal

2 DIR1+ 1st direction+ signal

3 AGND Analog GND Analog

4 X-OUT Scanning mirror X output Analog

5 CP2+ 2nd pulse+ signal

6 CP2- 2nd pulse- signal

7 CP1- 1st pulse- signal

8 IN0 0 input signal

9 12V GND Power 12V GND

10 5V GND Power 5V GND

11 Input 5V Input 5V

12 COM1 Relay1 COM

URL: E-mail: 16

13 COM3 Relay3 COM

14 NO4 Relay4 normal open port

15 NO2 Relay 2 normal open port

16 IN2 2 input signal

17 IN6 6 input signal

18 IN3 3 input signal

19 IN4 4 input signal

20 CP3 3rd pulse signal

21 DIR3 3rd pulse signal

22 PWM PWM signal TTL

23 Y-OUT Scanning mirror Y output Analog

24 DIR2- 2nd direction- signal

25 DIR2+ 2nd direction+ signal

26 DIR1- 1st direction- signal

27 GATE Laser output signal in YAG laser TTL

28 5V Power 5V

29 12V Power 12V

30 IN1 1 input signal

31 NO1 Relay1 normal open port

32 NO3 Relay3 normal open port

33 COM4 Relay4 COM

34 COM2 Relay2 COM

35 IN5 5 input signal

36 IN7 7 input signal

37 IN8 8 input signal

Model and description:

Model Main function

LMX-1 2D marking to control X galvo and Y galvo

LMX-1A 2D marking to control X galvo and Y galvo plus rotation table

LMX-1AB 2D marking to control X galvo and Y galvo plus XY table

2. LMM Series Cards and Software

LMM Marking Control Card is especially developed for scan head and fiber laser control in real time

fwibitehr ala PseCrIs b aurse iInPteGr,f aMcae.n Ilitg ihst uasnedd SwPitIh l acsoerrress vpiao n8d-ibnitg l assoeftrw paorew etor caodnjutsrotml laesnet.r marking. The suitable

● 2 analog output ports ( for scan head );

● 11 digital output signals, TTL/CMOS compatible;

● 7 digital input signals TTL/CMOS compatible;

● 1 PWM signal output (TTL).

There are following main functions of LMM marking software:

? Operation under WINXP／2000

? Acceptable for PLT and BMP

? Support drawing such as circle, rectangle, line etc.

? Support the edit of SHX and TTF fonts

? Barcode, 2D DataMatrix, series numbers, date, time

? Support the layers up to 8

? Save of all system parameters

? Support copy, delete, replace, move etc

? Support mirror, hatch, group

? Set pulse repetition rate, pulse duty factor

a?n dC IoPnGtr oelt c O. N/OFF, laser power of CO2 lasers from Synrad, Coherent, Universal Lasers, Manlight DB37: Pin Assignments

No. Name Description Characteristics

URL: E-mail: 17

1 CP1+ 1st pulse+ signal

2 DIR1+ 1st direction+ signal

3 AGND Analog GND Analog

4 X-OUT Scanning mirror X output Analog

5 CP2+ 2nd pulse+ signal

6 CP2- 2nd pulse- signal

7 CP1- 1st pulse- signal

8 IN0 0 input signal

9 COM Relay Comm

10 GND GND

11 NO Relay NO

12 D0

13 D2

14 D4

15 D6

16 NC Relay NC

17 Temp Alarm Temperature

18 Alarm MO Alarm MO

19 Frequency Alarm Frequency

20 CP3 3rd pulse signal

21 DIR3 3rd pulse signal

22 Pulse Repet Pulse Repe TTL

23 Y-OUT Scanning mirror Y output Analog

24 DIR2- 2nd direction- signal

25 DIR2+ 2nd direction+ signal

26 DIR1- 1st direction- signal

27 PA Power Amplifier(PA) TTL

28 5V 5V

29 Red Light Red Light TTL

30 IN1 1 input signal

31 D1

32 D3

33 D5

34 D7

35 Back Ref Alarm back reflection

36 MO Master Oscillator(MO) TTL

37 ES Emergency Stop TTL

Model and description:

Model Main function

LMM-1 2D marking to control X galvo and Y galvo

LMM-1A 2D marking to control X galvo and Y galvo plus rotation table

LMM-1AB 2D marking to control X galvo and Y galvo plus XY table

URL: E-mail: 18

3. ETH6608 Series Cards and Software

sTthaen dEaTloHn6e6 0p8la tcfoarrmd, wwihthic hE tihse rdneesti gcnoemdm tou npicraotvioidne tao PC, allows the capability of more devices

cmoanrfkiginugr aotiro ne,n agnradv iisn gm aoprep lcicoamtiopnasti.b lMe asrokluintgio nd ainta l acsaenr

be downloaded by using a RJ45 interface with default

I1P9 2a.d1d6r8e.s1s.X 1. 92.168.1.55, and the PC to be set under

Due to the configuration flexibility, there are four

models available to different requirements:

ETH6608A1_5/10, to control 1 analog scanner via ±5/10VDC

ETH6608A2_5/10, to control 2 analog scanners via ±5/10VDC

ETH6608A1D1_5/10, to control 1 analog scanner via ±5/10VDC, and 1 digital scanner

ETH6608A2D1_5/10, to control 2 analog scanners via ±5/10VDC, and 1 digital scanner

In its standard configuration, the ETH6608 consists of a base board with the following features:

? 100MBits Ethernet connection

? Compatible with digital scanner head

? Four 16-bit DAC output, selectable voltage output to control analog scanner

? 16 channels TTL compatible digital input

? 21 channels TTL compatible digital output

? 6 channels hardware limit inputs, to control motion

? Special instruction for pulse number

? 1 differential PWM output, minimum 10ns pulse width

The board dimensions and layout

Legend:

CCOONN12:: PDoigwitearl s5cVaDnCne 3r Ah,e 2aPdi,n X sYo2c-k1e0t 0 CON3: Analog scanner head

CCOONN45:: LEathseerrn IeOt, &R PJ4W5 Mco onuntepcutte r

URL: E-mail: 19

Electrical connections

1T hPeo pwoewr esru spopulyr ce is connected to a 2-pin “CON1” header on the board, 5VDC 3A power source is

required to operate this unit.

Port Description Remark

1 +5V +5VDC

2 GND Return

2A Dmigaileta lD s-cSaunbn 1e5r pins connector headed with “CON2”, digital scanner head can connect to this port with

protocol of XY2-100, while an analogue scanner works with external DAC by connecting to this port.

Pin Description Pin Description

1 CLK- 9 CLK+

2 SYNC- 10 SYNC+

3 XCH- 11 XCH+

4 YCH- 12 YCH+

5 ZCH- 13 ZCH+

6 NC 14 NC

7 NC 15 GND

8 GND

* 3 axis digital scanner works only ZCH-/ZCH+ are connected. Twisted cable is strongly recommended.

3 Analog scanner CON3

aTshsisig pnoerdt cfoarn S ccoanntrnoel re1i,t hwehri loen De AoCr 3tw &o 42 -faoxr isS csacnannenre2r.s ,D oArC o noeu t2p-uatx viso lstacgaen ntoe rb pel udse Zci-daexdis u. pDoAnC o1r d&e 2ri ng.

Pin Description Pin Description

1 DOUT3 2 DAC4

3 DOUT2 4 AGND

5 DOUT1 6 DAC3

7 DIN1 8 AGND

9 DIN2 10 DAC2

11 GND 12 AGND

13 VCC+5V 14 DAC1

15 NC 16 AGND

4H eLaadseerr mcoanrtkr o“lC ON4”, provides predefined or general IOs for laser and peripheral devices. Total 14 DIs,

18 DOs and 2 PWM outputs are available located on a female DB37 connector. 1 PWM is configured

as differential output.

No. General Defined For Fibre Laser Remark

1 VCC+5V VCC+5V +5V output

2 PWM3- PRR RETURN Return of PWM3+

3 PWM2

4 DOUT7 ES Emergency stop

5 DOUT9 RED ON Red beam

6 DOUT11 D0 Power setting LSB

7 DOUT13 D2 Power setting

8 DOUT15 D4 Power setting

9 DOUT17 D6 Power setting

10 DOUT19

11 DOUT21

12 GND GND Return of signal

13 DIN4

14 DIN6

15 DIN8 MO ALM Master oscillator alarm

16 DIN10 BK ALM Back reflection alarm

17 DIN11

18 DIN12

19 DIN16

20 DOUT4

URL: E-mail: 20

21 DOUT5

22 PWM3+ PRR Pulse repetition output

23 DOUT6 GATE Laser ON

24 DOUT8 MO Master Oscillator

25 DOUT10 PA Power Amplifier

26 DOUT12 D1 Power setting

27 DOUT14 D3 Power setting

28 DOUT16 D5 Power setting

29 DOUT18 D7 Power setting MSB

30 DOUT20

31 DIN3

32 DIN5

33 DIN7 TEMP ALM Temperature alarm input

34 DIN13

35 DIN9 FREQ ALM Frequency alarm input

36 DIN15

37 DIN14

4. LMC Series Cards and Software Our marking software has been designed to meet the needs of all types of users of laser marking

ssoysfttwemarse. oTnh nee wso sftywsaterem sw. aTsh ed epvaeclkoapgeed ptroo vbidee as sriegtnroifficit apnat cakdavgaen cfeomr eenxtisst ionvge rs pysretevmiosu,s olars aesr moarirgkiinnagl

cPoCn tcroonl tsryosl tseymstse, mw hpirleo vriedmingai nai nugs eerx tthreem aebliyli tuy sdeerf-ifnriee nadnldy. eItx'se caunte o lbajseecrt moraiernkitnegd ,j ogbrasp. hMicualtlilpyl ein htearradcwtiavree,

interfaces are supported giving the software the ability to control most Nd:YAG, CO2 and fiber laser

marking systems such as adjusting currents, frequency, duty ratio . and red light indication.

Unlike some marking software, the operator never has to remember what fonts and logo's need to be

lsooafdtweadr ef odr oae sp naortti cruelqaur irjeo bu. sTehrse tos olfetwaranr ea nayu tpormogartiacmalmly inpge rlfaonrgmusa gaells roerq usipreedc iagl racopdheics ,l oaanddin yge. t Tthhee

saosfptewcatr ec opnrotrvoild, ecsh aarlla octfe trh es pfalecxinibgle, ,a gnrgauplhairc rcootanttiroonl su,s aenrsd afruell ajucsctuifsictoamtioend. tToe, xint ctlou dbineg m raadrkiael dm caarkni nbge,

fixed or variable. Variable text can be retrieved at runtime from a variety of sources including, the

Type fonts can be vector filled using user specified density, angle and kerf. Graphics (sometimes called

f"eloagtuor'se"s o anr eo tehitehre sr ymsteenmus c) ocnatnro blleed i morp gorratepdh ifcroamlly ac olanrtgroel levda rvieiaty t hoef cmoomumseo na nvde ckteoyrb fooarmrda. ts. All graphic The software can create various objects such as barcode, DataMatrix, text, simple geometrical objects

(such as line, rectangle, round-corner rectangle, polygon, circle, ellipse etc), complex graphic objects

(such as PLT & BMP files), automatic date coding and alphanumeric serialization. Digital card (control CO2 laser, YAG laser)

? Data transfer:usb2.0 interface

? Digital output used for scan head

? Support FPK with three ways [optional]

? Support high-speed fly marking with rotary

encoder

? Eight digital input and seven digital output

used for other controlled equipment

? c2o5m ropuatteibsl eg)e, n4e oraf lt hdeig IiOta l psoigrtnsa clsa(nT TbLe OC IO,

can connect with relay.

? LASER Signal: TTL, used for laser On/Laser

Off .

? fPreWqMue Sncigyn aanl:d T dTuLt,y u rsaetido .t o adjust the

? Tow Direction/Pulse signals, used to control

URL: E-mail: 21

stepping motor.

? START Signal: used to connect foot switch SPI G3.0 card (control SPI laser)

? Use 68-pins SCSI 3 socket, connect SPI G3 laser module via 68-pin cable directly

? Adjustable digital/analog output used for scan head

? Mark-on-fly function with an encoder connected

? Extend axes output: Two Direction/pulse signals, used to control stepping motor or servomotor

? 25 routes general digital signals(TTL compatible), 4 of the IO ports can be OC IO, can connect with

relay

? Original start signal: Used when marking contents are the same and high speed is required

? Compatible with USB2.0 IPG CARD (control IPG-YLP laser and IPG-YLPM laser)

? Use 25-pins DB25 socket, connect IPG YLP and YLPM laser mod ule via 25-pin cable directly

? Adjustable digital/analog output used for scan head

URL: E-mail: 22

? Mark-on-fly function with an encoder connected

? Extend axes output: Direction/pulse signals, used to control stepping motor or servomotor

? 25 routes general digital signals(TTL compatible), 4 of the IO ports can be OC IO, can connect with

relay

? Original start signal: used when marking contents are the same and high speed is required.

? Compatible with USB2.0

Dynamic focus board

? Dynamic focus .three digital output for scan head

? Support FPK with two ways (optional)

? 6 routes digital input and 6 routes digital output

? LASER signal : TTL, used for laser on/laser off

? PWM signal: TTL ,used to adjust the frequency

and duty ratio

? Direction/pulse signals ,used to control stepping

motor or servomotor

? (DoBp2tio5n caol)n nector used for IPG YLP laser directly

? Compatible with USB2.0 PCI Board (control CO2 and YAG laser)

PCI-7F board (control fiber laser)

5. DA Converter Board

DmAar ckoinngv earctceur riasc ayn a inndte lgornagte ddi sptarondcuec st ifgonr adl igtriatanls tmo iasnsaiolong wuhei cshin igsl ele csosn svuesrcseiopnti,b tloe eton aeblelec thriicgahl enro ise.

There are two types: ->2 channel: supports 2 channels output, and the digital protocol has not extended coding, which is

labeled as “20071012-V101”;

URL: E-mail: 23

->3 channel: supports 3 channels output, and the digital protocol has the extended coding, which is

labeled as “20080107-V103”.

Connector’s description:

CON1 (DB15):

Pin No. Signal name Illustrations

1，9 CLK-/CLK+ Clock signal. Differential output

2，10 SYNC-/ SYNC+ Synchronized signal. Differential output

3，11 XChannel-/ XChannel+ Digital signal of X axis galvo. Differential output

4，12 YChannel-/ YChannel+ Digital signal of Y axis galvo. Differential output

5，13 ZChannel-/ ZChannel+ Digital signal of Z axis galvo. Differential output

6，14 Status-/ Status+ The state feedback signal of Galvo. Differential input

8，15 Gnd The reference ground of control card.

For usual three-dimension Galvo, only connecting CLK, SYNC XChannel, Ychannel, Zchannel with ten

signal lines is enough. A twisted-pair cable for connecting for digital signal is strongly recommended. CON2: Power socket

CON4—CON6: Analog Vol tage signal

The default range of output voltage is ±5V. For single interface drive, connect pin 1&3, the voltage is

±5V. For differential output drive, please connect pin 3&4, between which the voltage is ±10V.

URL: E-mail: 24

Model and description for LMC boards:

Model Main function

LMC-PCI-7 2D marking to 2D analog galvos plus 2 axes (rotary stage, on-fly, Z-axis or

XY-axis) to control CO2 or YAG laser.

LMC-PCI-7F 2D marking to 2D digital galvos plus 1 axis (rotary stage or Z-axis) to control

fiber laser.

LMC-USB-DIGIT aDxigisit aolr cXaYrd-a, xtois c) oton tcrooln 2trDol dCigOit2a lo gr aYlvAoGs lpalsuesr 2. axes (rotary stage, on-fly, ZLMC-

USB-IPG Fiber digital card, to IPG fiber lasers, 2D marking to control 2D digital galvos

plus 2 axes (rotary stage, on-fly, Z-axis or XY-axis)

LMC-USB-SPI pFliubse r2 d aigxietasl (craortadr, yt os tSaPgIe f,i boenr- fllay,s eZr-sa,x i2sD o rm XaYrk-ainxgis t)o control 2D digital galvos

LMC-D/A D/A conversion card, to convert 2 input digital signals into 2 output analog

signals , which are used to drive analog galvos.

TRheem baorka:r d s always come with 2D marking to control 2D galvos plus one axis (rotary or Z-axis). On-fly

and XY-axis are available upon request at additional cost.

URL: E-mail: 25

ST-DAC-XY2-CD DA Converter ST-DAC-XY2-CD series DA converter is an integrated product for digital to analogue single conversion,

teole ecntraicbalel nhoigishee.r marking accuracy and long distance signal transmission which is less susceptible to

Interface: Digital Singal Input

uTsheisd sfeorri edsig DitaIGl sITigAnLa lS iInGpNutA aLc IcNoPrdUinTg ctoon tnheec tXoYr 2is-

100 standard. The pin-out of this is shown right.

The DIGITAL SIGNAL INPUT connector is also

used for connecting the converter board to a

1p5oVw.e r supply with balanced power source of DC+/-

This board draws approximately 50mA from pins

17, 18, 19 and approx. 20mA from pins 23, 24, 25.

cHoonwneevceter,d wanhde no pderriavetinr gb, othaerdn 1a.n5dA issc raenqnueirresd afroer

each of X and Y axes.

Digital Singal Input

Interface: Power Output

DC+/-15V power to the two driver board is provided by

tAhNesAeL OcoGn nPeOcWtorE iRs sohuotpwunt caosn rnigehctt ofirgsu.r Te.h e pin-out of

cTohnen AeNctAorLsO pGro PvOidWe aEnRa lOogF oXu&tpYu at xsiisg noault pinu tth e range

bofo -a5rVd. to +5V for controlling the scanners via driver Power Output

APU空压机滤网 ERVOR 7202601

汽机润滑油滤网 PH718-11-CNVGE

汽机MCV伺服阀滤 R928023131

汽机ACV伺服阀滤 266B1869 安哥拉燃机配件

I20180904016 工具袋 SDBAG2 STOPDROP TOOLING 5

I20180904016 工具箱腕带 SDWSCOM1 STOPDROP TOOLING 8

I20180904016 工具绳索 SDCOIL1 STOPDROP TOOLING 8

I20180904016 工具绳带 SDLANWEB STOPDROP TOOLING 8

Standard Sensor

Attachment #3

305122901S

Alco Automation

EMERSON

Contaminant Trap Cartridge (bottle of 10)

Attachment #3

305527901S

Alco Automation

EMERSON

Glycol & Liquid Trap Separator Membrane ReplacementKit

Attachment #3

305529901S

Alco Automation

EMERSON

7 Micron Filter

Attachment #3

305448901S

Alco Automation

EMERSON

2 Micron Filter, inline 1/8 inch tube

203641000

EMERSON

Fuse 3A

Attachment #3

271081001

Alco Automation

EMERSON

Fuse Miniature 3.15A

Attachment #3

280750251

Alco Automation

EMERSON

Fuse, 1/8A, 250V

Attachment #3

280750238

Alco Automation

EMERSON

Moisture Generator, CAL Moisture, 3050FRU, 50 ppm(nominal)

Attachment #3

305010901S

Alco Automation

EMERSON

MS Dryer Assembly 3050-OLV FRU

Attachment #3

305400901S

Alco Automation

EMERSON

7 micron Filter

230536001

EMERSON

O-Ring EPR-218

Attachment #3

300.4511

Alco Automation

EMERSON

Kit Rebuild for Genie Filter Assy

Attachment #3

100.1848

Alco Automation

EMERSON

Fuse FST 1A, 250V S/B 5X20

Attachment #3

300.9244

Alco Automation

EMERSON

Fuse for Logic Power Supply (2A 250V)

Attachment #3

300.6254

Alco Automation

EMERSON

Fuse for Cooler Power Supply (6.3A 250V)

Attachment #3

300.6256

Alco Automation

EMERSON

Assy Peltier Cooler

Attachment #3

100.1578

Alco Automation

EMERSON

Thermalcote II (Heat Sink Silicone/Brush,

Peltier Coller Assy, Used for Peltier Coller replacement)

Attachment #3

301.1078

Alco Automation

EMERSON

Flow Restrictor 50 SCCM

Attachment #3

300.6245

Alco Automation

EMERSON

Flow Restrictor 250 SCCM

Attachment #3

300.4512

Alco Automation

EMERSON

330' Lead Acetate Paper

Attachment #3

CO0329

Alco Automation

EMERSON

Rear Window for Sample Chamber

Attachment #3

MC0406

Alco Automation

EMERSON

*1/32" Rate/Read Aperture Strip* (0-25 ppm and 0-30ppm)

Attachment #3

MC0409

Alco Automation

EMERSON

Headline Element 125770C

Attachment #3

MC0477

Alco Automation

EMERSON

Gasket for Rear Window

Attachment #3

MC0593

Alco Automation

EMERSON

Sensor Block & Detector

Attachment #3

SA2466

Alco Automation

EMERSON

Sample Chamber Assembly

Attachment #3

SA0452

Alco Automation

EMERSON

Humidifier Tubing Replacement Kit

Attachment #3

SA2193

Alco Automation

EMERSON

Analysis cell; AK30 mm; CaF2; Al; spiral pin

Attachment #3

42717646

Rosemount

EMERSON

0060104

IR-source cpl.; CaF2; Al; polished, Filing R134a

Attachment #3

42717153

Rosemount

EMERSON

0060104

XSP 09 X2-MID-4AC-5DC;

serial no. of analyzer required for programming

Attachment #3

43500709

Rosemount

EMERSON

0060104

In-line filter stainless steel; hose connection

Attachment #3

ETC00713

Rosemount

EMERSON

0060104

Chopper Assy; 4/5; X-stream

Attachment #3

42717962-V1

Rosemount

EMERSON

0060104

Spare Sensor:Immersion depth 36 mm / 1,5"

Attachment #3

287782

Bartec

EMERSON

Calibration for Spare Sensor

Attachment #3

239022

Bartec

EMERSON

6mm OD, T-Filter, 15 micron, SS316

Swagelok SS-6C-MM-1/3

EMERSON

Spare ID Spool (Ins. Spare) – Items 1 & 2

Attachment #3

SP900IDBDY

Thermo Fisher Scientific

EMERSON

Spool Lock Ring (Op. Spare)

Attachment #3

HD-B0070

Thermo Fisher Scientific

EMERSON

Gas Filter Kit (Op. Spare)

Attachment #3

1,2,3,6,7&8

Gas Filter Kit

Thermo Fisher Scientific

EMERSON

Pre-Set Torque Spanner (Ins. Spare)

Attachment #3

10 & 11

H90-0030/A

Thermo Fisher Scientific

EMERSON

Amp Box Seal Ring, Pack of 2 (Op. Spare)

Attachment #3

ZR20-0117/B

Thermo Fisher Scientific

EMERSON

Amp Box to Stem "O" Ring, Pkt. 10 (Op. Spare)

Attachment #3

ZR10-0120/B

Thermo Fisher Scientific

EMERSON

PCA Valve Driver 500 GC

Attachment #3

2-3-0500-178

Rosemount Analytical

EMERSON

0060104

Motherboard, Model 500

Attachment #3

2-3-0500-200

Rosemount Analytical

EMERSON

0060104

Pre-Amplifier Board, Model 500

Attachment #3

2-3-0500-201

Rosemount Analytical

EMERSON

0060104

Temperature Controller & Valve Driver Board

Attachment #3

2-3-0500-202

Rosemount Analytical

EMERSON

0060104

Teflon Thermistor Seals (Set Of 10)

Attachment #3

2-3-0500-391

Rosemount Analytical

EMERSON

0060104

Microfuse; 3A 120V Ac (Set Of 5)

Attachment #3

2-3-0500-392

Rosemount Analytical

EMERSON

0060104

PCA CPU 32-bit w/ (4) RS-232 & BOS - Requires 32-bit application file

Attachment #3

2-3-2350-232

Rosemount Analytical

EMERSON

0060104

Kit, Repair 6-port GC Valve with Instns - For Models 500 & 1000 only

Attachment #3

2-3-9300-108

Rosemount Analytical

EMERSON

0060104

Diaphragm, Shut-Off Valve, GC

Attachment #3

2-4-4000-179

Rosemount Analytical

EMERSON

0060104

Valve, Solenoid, 3-Way ASCO, (CSA, Class 1, Group B)

Attachment #3

2-4-5000-075

Rosemount Analytical

EMERSON

0060104

Filter Element 2 micron,Swagelok SS-2F-K4-2

Attachment #3

2-4-5000-113

Rosemount Analytical

EMERSON

0060104

Filter, Inline 1/8"

2-4-5000-112

EMERSON

0060104

Solenoid, 4-Way, FABCO

Attachment #3

2-4-5000-218

Rosemount Analytical

EMERSON

0060104

1/8" NPTF, Membrane Filter, Genie Model 120, SS316

2-4-5000-939

EMERSON

0060104

Membrane Kit, Genie? Model 120 Filter/Bypass/LSO

Attachment #3

2-4-5000-938

Rosemount Analytical

EMERSON

0060104

Regulator, Carrier 60-110 Psig, Masoneilan (Baked)

Attachment #3

2-4-9500-084

Rosemount Analytical

EMERSON

0060104

Power Supply, 20V 0.4A terminal strip, Acopian 20EB40

Attachment #3

2-4-9500-230

Rosemount Analytical

EMERSON

0060104

Kit, 9K Thermistors C/9061 (Not for use with Hydrogen Carrier)

Attachment #3

2-6-1611-083

Rosemount Analytical

EMERSON

0060104

Column Set C6+ BTU/CV 4 minute

Attachment #3

2-3-0520-101

Rosemount Analytical

EMERSON

0060104

Membrane Kit 101 Filter

Attachment #3

2-4-5000-394

Rosemount Analytical

EMERSON

0060104

Columns for GC with 2-7-0573-437

Spare GC Micro-Packed Column per Sales Order

Attachment #3

2-3-0500-375

Rosemount Analytical

EMERSON

PCA detector preamp

Attachment #3

2-3-0710-001

Process Analytical Division

EMERSON

0060104

PCA solenoid/heater driver

Attachment #3

2-3-0710-002

Process Analytical Division

EMERSON

0060104

PCA base I/O

Attachment #3

2-3-0710-003

Process Analytical Division

EMERSON

0060104

PCA, Backplane, 700XA & 1500XA

Attachment #3

2-3-0710-005

Process Analytical Division

EMERSON

0060104

Kit, Fuse, 700XA & 1500XA

Attachment #3

2-3-0710-074

Process Analytical Division

EMERSON

0060104

Assy, 6-port XA valve

Attachment #3

2-3-0710-100

Process Analytical Division

EMERSON

0060104

O-ring, dome seal, 700XA

Attachment #3

2-4-0710-149

Process Analytical Division

EMERSON

0060104

Solenoid, 4-way

Attachment #3

2-4-0710-159

Process Analytical Division

EMERSON

0060104

Solenoid, 4-way

Attachment #3

2-4-0710-224

Process Analytical Division

EMERSON

0060104

Kit, diaphragm, 6-port XA valve

Attachment #3

2-4-0710-248

Process Analytical Division

EMERSON

0060104

Diaphragm, Shut-Off Valve, GC

Attachment #3

2-4-4000-179

Process Analytical Division

EMERSON

0060104

Pressure switch, carrier

Attachment #3

2-4-0710-266

Process Analytical Division

EMERSON

0060104

Regulator, Carrier 10-100 Out

Attachment #3

2-4-5001-977

Process Analytical Division

EMERSON

0060104

CPU Board, 700XA & 1500XA

Attachment #3

7A00055G02

Process Analytical Division

EMERSON

0060104

700XA LOI

Attachment #3

7A00148G01

Process Analytical Division

EMERSON

0060104

TDK Power Supply 24 VDC OUT, 185W 85-265 VAC IN, Model 700, Model 1000A, 700XA & 1500XA only

Attachment #3

7C00086-001

Process Analytical Division

EMERSON

0060104

Assembly, FPD Interface PCA in Enclosure

Attachment #3

2-3-0710-041

Process Analytical Division

EMERSON

PCA, Wire Terminal, Ultem, TCD/FID/FPD

Attachment #3

2-3-0710-018

Process Analytical Division

EMERSON

725977-1 Column 1: 1' X 1/16 20% OV-17 ON CHROMOSORB W HP 80/100

Attachment #3

2-3-0500-375

Process Analytical Division

EMERSON

725977-1 Column 2: 9' X 1/16 20% OV-17 ON CHROMOSORB W HP 80/100

Attachment #3

2-3-0500-375

Process Analytical Division

EMERSON

725977-1 Column 3A: 9' X 1/16 20% OV-17 ON CHROMOSORB W HP 80/100

Attachment #3

2-3-0500-375

Process Analytical Division

EMERSON

725977-1 Column 3B: 9' X 1/16 20% OV-17 ON CHROMOSORB W HP 80/100

Attachment #3

2-3-0500-375

Process Analytical Division

EMERSON

725977-2 Column 1: 18"x1/16 TYPE NC8 ON RESCIL 80/100

Attachment #3

2-3-0500-375

Process Analytical Division

EMERSON

100

725977-2 Column 2: 3'X1/16 TYPE HAYSEP R ACID WASHED 80/100

Attachment #3

2-3-0500-375

Process Analytical Division

EMERSON

101

725977-2 Column 3: 6'x1/16 TYPE HAYSEP R ACID WASHED 80/100

Attachment #3

2-3-0500-375

Process Analytical Division

EMERSON

102

725977-3 Column 1: 18"x1/16 TYPE NC8 ON RESCIL 80/100

Attachment #3

100

2-3-0500-375

Process Analytical Division

EMERSON

103

725977-3 Column 2: 3'X1/16 TYPE HAYSEP R ACID WASHED 80/100

Attachment #3

101

2-3-0500-375

Process Analytical Division

EMERSON

104

725977-3 Column 3: 6'x1/16 TYPE HAYSEP R ACID WASHED 80/100

Attachment #3

102

2-3-0500-375

Process Analytical Division

EMERSON

106

Relief Valve Kit, Swagelok

Attachment #3

103

SWAGELOK0001

Wilmax Control

EMERSON

107

Filter Regulator, Bifold Fluidpower

Attachment #3

104

BIFOLD0030

Wilmax Control

EMERSON

108

4 WAY SOLENOID VALVE24 VDC Ex d, 316SS; ATEX, Versa

Attachment #3

105

CSG-4322-316-XDBS1-D024

Wilmax Control

EMERSON

109

3 WAY SOLENOID VALVE24 VDC Ex d, 316SS; ATEX, Versa

Attachment #3

106

CSG-3321-316-XDBS1-DO24

Wilmax Control

EMERSON

110

REPAIR KIT 810 CELLSAMPLER, DOEDIJNS

Attachment #3

107

DOESAMPLE0007

Wilmax Control

EMERSON

111

Versa 4 WAY SOLENOID VALVE 24 VDC Ex d, 316SS; ATEX

Attachment #3

108

CSG-4322-316-LB-XN-DO24

Wilmax Control

EMERSON

112

Versa 3 WAY SOLENOID VALVE 24 VDC Ex d, 316SS; ATEX

Attachment #3

109

CSG-3211-316-LB-XN-DO24

Wilmax Control

EMERSON

113

4 WAY SOLENOID VALVE 24 VDC Ex d, 316SS;ATEX; NACE MR 0175 Certificate, Versa

Attachment #3

110

VERSA0080

Wilmax Control

EMERSON

114

3 WAY SOLENOID VALVE 24 VDC Ex d, 316SS;ATEX; NACE MR 0175 Certificate, Versa

Attachment #3

111

VERSA0077

Wilmax Control

EMERSON

115

1000cc PORTABLE CONSTANT PRESSURERECEIVERS; SS316; Viton A seals PG 2000Psi Press.Rating 2 off SS Gauges Include as metric 0-100Barg; Std. Burst Relief Disc; 80% fill Switch; DOTApproval; 1/4"

Attachment #3

112

PGI0001

Wilmax Control

EMERSON

116

THERMOSTAT CONTROLLED HEATER ATEXAPPROVED Certificate, INTERTEC

Attachment #3

113

INT0004

Wilmax Control

EMERSON

117

Standard repair kit for gas filter regulator, TESCOM

Attachment #3

114

TESCOM0034

Wilmax Control

EMERSON

118

500cc PORTABLE CONSTANT PRESSURERECEIVERS; SS316; Viton A seals PG 2000Psi Press.Rating 2 off SS Gauges Include as metric 0-100Barg; Std. Burst Relief Disc; 80% fill Switch; DOTApproval; 1/4"N

Attachment #3

115

PGI0002

Wilmax Control

EMERSON

120

Replacement - Pressure Transmitter 0 - 100 bar

Attachment #3

116

3051TG4A2B21BB4I1D4M5P1Q4Q8S5

Rosemount Measurement

EMERSON

0060103

121

Replacement - Pressure Transmitter 0 - 25 bar

Attachment #3

117

3051TG3A2B21BB4I1D4M5P1Q4Q8S5

Rosemount Measurement

EMERSON

0060103

122

Replacement - Pressure Manifold

Attachment #3

118

0306RT22AA11

Rosemount Measurement

EMERSON

0060103

124

Replacement - Resistance Thermometer, Pt 100 Ohm RTD Class B Standard without Twell

Attachment #3

119

0065N32J0080N0370I1XA

Rosemount Measurement

EMERSON

0060103

125

Replacement - Resistance Thermometer, Pt 100 Ohm RTD Class B Standard without Twell

Attachment #3

120

0065N32J0080N0340I1XA

Rosemount Measurement

EMERSON

0060103

127

Replacement - Smart Temperature Transmitter 0 - 100 DEG C

Attachment #3

121

3144PD2A2I1M5C4Q4XA

Rosemount Measurement

EMERSON

0060103

129

Replacement - Bourdon Tube Pressure Gauges, Safety Pattern

Series EN 837-1

Model: 233.30

Specifications according to data sheet: PM 02.04

Accuracy class: NS 63: class 1.6? NS 100/160: class 1.0

Measuring system: stainless steel

Case filling: with

Nominal size: 100 mm

Pressure-Range-Type: gauge pressure range

Range: 0...100 barg

Process connection: 1/2 NPT

Connector position: lower mount

Window: laminated safety glass

Pointer: adjustable pointer

Accuracy class: class 1.0

Material pressure element: Measuring System 316L

Case filling fluid: glycerine 99.7% Pressure Gauge Standard: International (standard Europe)

Attachment #3

122

66226554

Wika

EMERSON

130

Replacement - Bourdon Tube Pressure Gauges, Safety Pattern

Series EN 837-1

Model: 233.30

Specifications according to data sheet: PM 02.04

Accuracy class: NS 63: class 1.6? NS 100/160: class 1.0

Measuring system: stainless steel

Case filling: with

Nominal size: 100 mm

Pressure-Range-Type: gauge pressure range

Range: 0...20 barg

Process connection: 1/2 NPT

Connector position: lower mount

Window: laminated safety glass

Pointer: adjustable pointer

Accuracy class: class 1.0

Material pressure element: Measuring System 316L

Case filling fluid: glycerine 99.7%

Pressure Gauge Standard: International (standard Europe)

Attachment #3

123

66226555

Wika

EMERSON

131

A) COLTON REPLACEMENT SCREENFOR3" Y STRAINER MODEL: 300YFLCCSS316 SCREEN: 40 MESH LINED 1/8"PERFORATED.B) COLTON SPARE GASKET FOR3" Y STRAINER MODEL: 300YFLCCGRAPHITE FILLED 316SS SPIR

970516

124

99ZSSPE

Inko Brothers

EMERSON

132

O rings seal+ Seat Insert + gaskets

SO 1811001654-3

21-25; 4, 14-15

Soft spare for TMB – 2” – 600#

MRC Transmark

EMERSON

133

O ring seals + seat

SO 1811001654-4

16-17; 4

Soft spare for Floating – 1-1/2” – 600#

MRC Transmark

EMERSON

134

O ring seals + seat

SO 1811001654-5

12, 6

Soft spare for Floating – 1” – 600#

MRC Transmark

EMERSON

135

O ring seals + seat

SO 1811001654-8

21-25, 4, 14-15

Soft spare for Floating – 2” – 300#

MRC Transmark

EMERSON

136

O rings seal+ Seat Insert + gaskets

SO 1811001654-1

21-24, 4, 14-15

Soft spare for TMB – 8” – 600#

MRC Transmark

EMERSON

137

O rings seal+ Seat Insert + gaskets

SO 1811001654-2

21-25, 4, 14-15

Soft spare for TMB – 4” – 600#

MRC Transmark

EMERSON

138

O rings seal+ Seat Insert + gaskets

SO 1811001654-7

21-25, 4, 14-15

Soft spare for TMB – 3” – 300#

MRC Transmark

EMERSON

139

Nozzle

13/3150-001 DAF R01

421299.08330.XJZZ

Tai Milano SPA

EMERSON

140

Disc

13/3150-001 DAF R01

426382.10120.MKDZ

Tai Milano SPA

EMERSON

141

Spring(with 2 springbuttons)

13/3150-001 DAF R01

000004.11428.XJZM

Tai Milano SPA

EMERSON

142

Set of gaskets

13/3150-001 DAF R01

421399.23120.PAZZ

Tai Milano SPA

EMERSON

144

IQ3 Mod 1D IQ10-95 Absolute Encoder Kit

Attachment #3

125

Rotork Controls

EMERSON

145

IQ3 Mod 6G Standard Logic Control PCB (Unprogramed) NO

Attachment #3

126

Rotork Controls

EMERSON

146

IQ3 Mod 20C Hmi PCB Kit

Attachment #3

127

20C

Rotork Controls

EMERSON

147

IQ3 Mod 20H O/C And L/S/R Knob Kits

Attachment #3

128

Rotork Controls

EMERSON

148

IQ3 Mod 1B/1 IQ10-18 Sliding Coupling

Attachment #3

129

Rotork Controls

EMERSON

149

IQ3 Mod 1J IQ10-18 Piezo Assy Std -Needs Rotork engineer

Attachment #3

130

Rotork Controls

EMERSON

150

IQ3 Mod 6B IQ10-35 Chassis Type 1 Power Module no Contactor

Attachment #3

131

Rotork Controls

EMERSON

151

IQ3 Mod 6D IQ10-35 Contactor Assembly

Attachment #3

132

Rotork Controls

EMERSON

152

IQ3 Mod 1G IQ10-18 Hand/Auto Lever Kit

Attachment #3

133

Rotork Controls

EMERSON

153

IQT MOD 1E Resolver Parts

Attachment #3

134

Rotork Controls

EMERSON

154

IQT MOD 6C Motor and Power PCB Standard-AC

Attachment #3

135

Rotork Controls

EMERSON

155

IQT MOD 6G Main PCB (Un-programmed)

Attachment #3

136

Rotork Controls

EMERSON

156

IQT MOD 20B Local Push-Button PCB

Attachment #3

137

20B

Rotork Controls

EMERSON

157

IQT MOD 20H Open/Close & Local/Stop/Remote Knob Assembly

Attachment #3

138

20H

Rotork Controls

EMERSON

158

IQT MOD 7C ATEX Bung Clip and 'O' Ring

Attachment #3

139

Rotork Controls

EMERSON

159

IQT MOD 1B Hand Auto Parts 125/250

Attachment #3

140

Rotork Controls

EMERSON

160

IQT MOD 4 IQT125-500 Hand Wheel Only Kit

Attachment #3

141

MOD4

Rotork Controls

EMERSON

161

IQT MOD5 IQT125/250 Motor (BERG)

Attachment #3

142

MOD5

Rotork Controls

EMERSON

162

IQT MOD 1B Hand Auto Parts 1000

Attachment #3

143

Rotork Controls

EMERSON

163

IQT MOD 4 IQT1000 Hand Wheel Only Kit

Attachment #3

144

MOD4

Rotork Controls

EMERSON

164

IQT MOD5 IQT500/1000/2000 Motor (BERG)

Attachment #3

145

MOD5

Rotork Controls

EMERSON

166

REPAIR KIT FOR UNIVERSAL SOLENOID PN 456910-6G5 SOL

Attachment #3

146

W456910-6G5

Daniel M&C

EMERSON

168

MP5008-SS3 Vehicle Scale Kit MP 50t 08 C3/HBConsists of:PDX powercells x 8Capacity: 50T

Attachment #3

147

61043551

Mettler-Toledo

EMERSON

169

TA000233-005 Cable Assy LC PDX 5m

Attachment #3

148

61043481

Mettler-Toledo

EMERSON

170

TA000233-007 Cable Assy LC PDX 7m

Attachment #3

149

61043482

Mettler-Toledo

EMERSON

171

TA000237-020 POWERCELL PDX Home Run Cable, 20m

Attachment #3

150

61044731

Mettler-Toledo

EMERSON

172

IND780 Weighing Terminal SS Desk IP69K Color1 x PDX Powercell Channel1 x 4 I/O RelayVehicle Application PacAC230V UK Plug

Attachment #3

151

78J60000C0V0C00

Mettler-Toledo

EMERSON

173

TC100884X20 LPO 240V Export TC100884-20Without Rod

Attachment #3

152

61043831

Mettler-Toledo

EMERSON

174

Service Tool ByPass Box PDX TA000236

Attachment #3

153

72233698

Mettler-Toledo

EMERSON

175

Industry Vehicle MISC Ex Dual LED Traffic Light (red/green)100-277VAC, 50/60Hz; 30 W-25 (-60)°C < T5 < 55°CIP66 & NEMA type 4XSuitable for wet marine locations

Attachment #3

154

MISC-IND-VEH

Mettler-Toledo

EMERSON

177

4 POLES CONTACTOR, 230VAC,25A, SCHNEIDER

Attachment #3

159

LC1D128P7

United Automation

EMERSON

178

RELAY C/W BASE 2P, 24VDC, WEIDMULLER

Attachment #3

160

DRM270024LT+FS2C0+776

United Automation

EMERSON

179

Fluorescent Lamp Fitting c/w14W, Fluorescent Tube, 230VAC, SEHYUN ELECTRIC

Attachment #3

161

MF14W

United Automation

EMERSON

180

AIR FLOW SWITCH 24VDC, DWYER

Attachment #3

162

AVFS‐2

United Automation

EMERSON

181

FUSE, GLASS, QUICK BLOW, 0.5A, 5X20MM, MULTICOMP

Attachment #3

164

MCF05G‐500MA

United Automation

EMERSON

182

FUSE, GLASS, QUICK BLOW, 1A, 5X20MM, COOPER BUSSMANN

Attachment #3

165

S500‐1‐R

United Automation

EMERSON

183

FUSE, GLASS, QUICK BLOW, 2A, 5X20MM, COOPER BUSSMANN

Attachment #3

166

S500‐2‐R

United Automation

EMERSON

184

FUSE, GLASS, QUICK BLOW, 4A, 5X20MM, MULTICOMP

Attachment #3

167

MCF05G‐4A

United Automation

EMERSON

185

MCB, 10KA, 2P, 6A, Type B Curve, Schneider

Attachment #3

168

A9F73206

United Automation

EMERSON

186

MCB, 10KA, 2P, 20A, C CURVE SCHNEIDER

Attachment #3

169

A9F74220

United Automation

EMERSON

187

POWER SUPPLY UNIT, PSU, DINRAIL, 24V, 20A, PHOENIX CONTACT

Attachment #3

170

QUINT‐PS/1AC/24DC/20

United Automation

EMERSON

188

SCHOTTKY DIODE (DUAL DIODE), ST MICROELECTRONICS

Attachment #3

171

STPS12045TV

United Automation

EMERSON

189

Isolator, 2P, 32A, Schneider

Attachment #3

172

A9S60232

United Automation

EMERSON

190

Door Switch c/w Cover, Omron

Attachment #3

175

Z‐15GQ‐B/AP‐Z

United Automation

EMERSON

192

1/4" NPTF Stainless Steel Housing Filter with Glass Fibre Element

Part No. 95S6-1/4"

PARKER

EMERSON

193

Filter Cartridge

050-11-DQ,

25 micron

050-11-DQ,

25 micron

PARKER

EMERSON

195

Inline Filter

MICRA MC-0477

EMERSON CONTROL TECHNIQUES 3RFS520-350.230CT 3RFS520-350.230CT

EXHAUST FAN MOTOR, 5.5KW, 460V, 60 HZ, SPEEDZ; 432RPM

MODEL: YB2-200L-18, DELTA CONNECTION, IP55

PRFERRED BRAND: TOSHIBA, TECO, ABB, SIEMENS, MITSUBISHI

P/F GENERAL ELECTRIC SPEEDTRONIC

CONTROL SYSTEM MARK VI VME ANALOG INPUT CARD

P/N: IS200VAICH1DAB

VME SERVO CARD

P/N: IS200VSVOH1BEF

VME CONTROLLER CARD

P/N: IS215UCVGH1AD

VME COMMUNICATION INTERFACE

P/N: IS215VCMIH2CC

PROTECTION CARD

P/N: IS215VPROH1B

EMERSON

DeltaV Smart Switch

P/N: VE6046P4

MFR: Emerson

1/4 OD, Miniature T-Filter c/w Micrifibre Cartridges, SS316

切粒机O型圈,NBR,G75 40 EA

切粒机O型圈,NBR,OR2504000 40 EA

切粒机O型圈,RUBBER,OR3006500 40 EA

切粒机V型密封,NBR,TWAV00500(Φ48-Φ52） 40 EA

切粒机止动环,C-Φ38,SUS304 20 EA

切粒机止动环,C-Φ39,SUS304 20 EA

切粒机止动环,C-Φ40,SUS304 20 EA

切粒机止动环,C-Φ70,SUS304 20 EA

91S6-1/4"

PARKER/BALSTON

EMERSON

198

1/4 OD, Inline Sintered Filter, 2 micron, SS316

SS-4F-2

P-Q控制手柄M120-1818

P-Q Controls M115-1518

P-Q Controls M120-635

P-Q controls M115-96CONJUNTO DE AMARRE FINAL: AMF-OPGW-13. Fabricante: SAPREM. Compuesto de: 2 GRILLETE RECTO GN-16T,1 TIRANTE 600 mm. TA-1/600,1 GUARDACABOS G-16,1 EMPALME PROTECCION EPAW FO 13/I/2600,1 RETENCION AMARRE RAAW F.O. 20/Dcha,1 GRAPA CONEXION A TORRE GCSAL-8/14 SAPREM(西班牙)

BICONJUNTO DE AMARRE BAJANTE: BAMB- OPGW-13. Fabricante: SAPREM. Compuesto de: 4 GRILLETE RECTO GN-16T, 2 TIRANTE 600 mm. TA-1/600, 2 GUARDACABOS G-16, 2 EMPALME PROTECCION EPAW FO 13/I/2600, 2 RETENCION AMARRE RAAW F.O. 20/Dcha, 2 GRAPA CONEXION A TORRE GCSAL-8/14 SAPREM(西班牙)

BICONJUNTO DE AMARRE PASANTE: BAMP- OPGW-13. Fabricante: SAPREM. Compuesto de: 4 GRILLETE RECTO GN-16T, 2 TIRANTE 300 mm. TA-1/300, 2 GUARDACABOS G-16, 2 EMPALME PROTECCION EPAW FO 13/I/2600, 2 RETENCION AMARRE RAAW F.O. 20/Dcha, 1 GRAPA CONEXION A TORRE GCSAL-8/14 SAPREM(西班牙)

BICONJUNTO AMARRE BAJANTE EN SUSPENSION: BAMBS- OPGW-13. Fabricante: SAPREM. Compuesto de: 1 GRILLETE RECTO GN-16T, 1 ESLABóN PLANO (B) ESP-16, 1 YUGO TRIANGULAR YD-300, 2 TIRANTE 600 mm. TA-1/600, 2 GUARDACABOS G-16, 2 EMPALME PROTECCION EPAW FO 13/I/2600, 2 RETENCION AMARRE RAAW F.O. 20/Dcha, 2 GRAPA CONEXION A TORRE GCSAL-8/14 SAPREM(西班牙)

CONJUNTO DE SUSPENSION: CS- OPGW-13. Fabricante: SAPREM. Compuesto de: 1 ESTRIBO “U.Bolt” E-16x80x110, 1 ESLABON PLANO ESP-16, 1 GRAPA DE SUSPENSION GAS-3/13 Brida, 1 VAR. PROTECCION GAS-3 VPGS3AL 13/D/1800, 1 GRAPA CONEXION PARALELA GPC-11/30, 1 CABLE CONECTOR CC1TT-120x1000/M-12 SAPREM(西班牙)

GRAPA BAJANTE DOBLE: SFO-CD-3. Fabricante: SAPREM SAPREM(西班牙)

SET ACUMULADOR OPGW: 4xSFOAL-P-36. Fabricante: SAPREM SAPREM(西班牙)

AMORTIGUADOR OPGW: AMG-XXYYZZ. Fabricante: SAPREM SAPREM(西班牙)

P & Q Controls Single axis Control M115SL15F71

P & Q Controls Single axis Control M115-1824

P & Q Controls Single axis Control M115-1825

P - Q Controls RH113BD

010030 1 PC Hopper Loader FG_205.1/21 HM

79-80-015-747

LPS

SKR

SIGMA/SIGMA EXL

BIO-SAF

STA-SAF ( S90, GRS, RLS )

SKR-U

BIO-SAF

STA-SAF ( S90, JRS, RLS )

SKR-U

SURE-SAF ( CSR, CSI )

GCR-S ( BioSaf )

ECO-SAF ( ECR )

SURE-SAF ( CSR, CSI )

GCR-S ( BioSaf )

ECO-SAF ( ECR )

RB-90

MRB High Pressure

FRB Low Pressure

SVI

Rupture Disk (Bursting Disc) and Safety Relief Valve Combination

RB-90

MRB High Pressure

FORWARD ACTING DISKS

Forward acting, or conventional rupture disks (bursting discs) have been a mainstay in process applications since BS&B developed the first rupture in 1931. Developed in 1934, the Type B disk, the "granddaddy" of all rupture disks (bursting discs) is still the disk-of-choice in many applications.

Applying load to the concave side, the disk is subjected to tension forces. Forward acting disks regulate burst pressures by the tensile strength of the material.

For low burst pressures, the Type D disk has a slotted metal top section and a metal or fluorocarbon seal. For higher operating ratios, the scored NU-SAF family of disks is often selected for polymerization processes. Our VAC-SAF line offers protection from excessive vacuum or overpressure.

For tank car applications, the ITC disk protects intermodel tank containers while the SR-TC is a surge resistant disk for railroad took cars and over-the-road trailer service industry.

A wide range of standard rupture disk (bursting disc) assemblies is available for your specific application. These Threaded and Welded Assemblies are discarded after disk rupture. Customized designs are available for customer applications that cannot be met using standard assembly designs.

Solid Metal Rupture Disk (Bursting Disc) Type B

Composite Rupture Disk (Bursting Disc) Type D

NU-SAF

Solid Metal Rupture Disk (Bursting Disc) Type B

Composite Rupture Disk (Bursting Disc) Type D

NU-SAF

VAC-SAF

ITC Cargo Gard

SR-TC

VAC-SAF

ITC Cargo Gard

SR-TC

Assemblies - Custom Rupture Disk (Bursting Disc)

The hopper loader FG 205.1/21 HM for the pneumatic

conveying of free-flowing granulates, powders and regrind

mainly consists of the following components:

Material hopper: transparent plastic

Volume: 4 l

Material connecting piece: ? 38 mm

Conveying air filter: filter cartridge 0.2 m2

(polyester)

Filter cleaning: with circulating air

Control unit: microcontroller

Blower: integrated blower (0.8 kW)

Power supply: power plug

(1 N PE 230 V 50 Hz)

Version with lifting magnet

With clamping ring FG 200

010090 1 PC receiving cover Lk.?330 - FG200

79-81-004-501

recording cover with Lk ?330 for FG 200

Temperature:

Max. permissible operating Temperature: 80 °C

Max. ambient Temperature: 40 °C

010070 1 PC suction nozzle ?38 ST-ZN

79-81-013-590

in galvanized steel, ? 38 mm, l = 965 mm

010080 1 PC PVC hose package ? 38 roll length: 4 m

79-80-005-666

PVC hose ? 38 with copper helix

Temperature stability: 20 °C up to 60 °C, short-term up to 85 °C

Roll length: 4m

incl. 2 hose clamps

E120-1073 P-Q Controls

P-Q PQ Controls Crane Joystick M115DL15S63

M400-35-20 P-Q Controls Level Sensor

P-Q PQ Controls Joystick / Lever M100-89

P-Q CONTROLS M536-02-AA-05

P-Q PQ Controls Joystick / Lever Model 100-04

M220-25-00019 P-Q Controls

P-Q Controls M115-736

P-Q CONTROLS 524C51RCC5

Model no

EP5XX – Double acting, electropneumatic

EP5FS – Double acting, electropneumatic Fail in last position

EP5IS – Double acting, electropneumatic, Intrinsically safe ATEX, CSA/FM

EP5EX – Double acting, electropneumatic, Explosion proof, ATEX, IEC, FM/CSA

Spoolvalve

HP – High performance

LB – Standard performance

Air connection

G – 1/4″ G air, M20 x 1,5 electrical

N – 1/4″ NPT air, 1/2″ electrical

M – 1/4″ NPT air, M20 x 1,5 electrical

Surface treatment

U – Epoxy, ED

M – Tufram R66 (Powder epoxy I/P on EP5)

R – Tufram R66 with stainless steel I/P

Spindle

01 – 14 mm female

23 – Rotary, Namur, VDI/VDE 3845

Cam

K01 – Linear 90 deg

K03 – Linear 30/60 deg

Frontcover

PV9 – 90 deg, 0-100% scale

PV6 – 60 deg, 0-100% scale

PV4 – 45 deg, 0-100% scale

PV3 – 30 deg, 0-100% scale

PV0 – Blank, no scale

Function

D – Direct

R – Reverse

010130 PC General Technical Details

10-20-000-050

Connection and technical data

Electrical connection: 3/N/PE 400V 50Hz

Control voltage: AC 230 V AC / 24 V DC

Protection level: IP 54 for control cabinets and panels

IP 20 for displays and printers

Ambiant air temperature: +5 to +40°C

Compressed air: DIN ISO 8573-1 min. class 5 better class 4

paint colour: RAL 5018 for control cabinets

RAL 7016 for frames and stands

RAL 5018 for steel cover plates

No paint coating for parts of stainless

steel and aluminum.

Safety / quality: according to EU regulations.

Noise level: max 80 dB(A) according to DIN ISO 3744

Aggregates greater than 80 d B (A) are in the

Specification marked with (!).

010140 PC Proof of performance / Exclusions

10-20-000-051

48EAE15AL3(B) 11.1 15 2.2 3.0 2855 15.7 398 3.8 1.7 1.6 41 0.59 15 3/8"

48EAE28AL3(B) 20.7 28 4.4 6.0 1300 16.2 410 4.1 1.9 1.6 41 0.59 15 3/8"

48EAE41AM3(B) 30.2 41 6.6 9.0 1090 17.3 440 4.3 2.0 1.9 48 0.75 19 3/8"

48EAE58AM3(B) 42.8 58 8.9 12 770 17.3 440 4.3 2.0 1.9 48 0.75 19 3/8"

48EAE58AM4(B) 42.8 58 8.9 12 770 17.3 440 4.3 2.0 1.9 48 0.75 19 1/2"

48EAE90AH4(B) 64.2 87 13.3 18 515 18.5 470 6.6 3.0 2.3 58 0.81 21 1/2"

48EAE105AH4(B) 76.7 104 15.5 21 340 18.5 470 6.6 3.0 2.3 58 0.81 21 1.2"

48EAE135MH4(B) 98.1 133 19.9 27 265 19.1 485 7.3 3.3 2.4 61 0.94 24 1/2"

48EAE175AX6(B) 129.8 176 26.6 36 190 21.6 549 10.2 4.6 2.7 69 1.06 27 3/4"

48EAE230AX6(B) 169.6 230 33.9 46 145 21.6 549 10.2 4.6 2.7 69 1.06 27 3/4"

Model Number

Max.

Speed

(rpm)

Length Weight Head Height Side to

Center

Tool Range

Max Tq Min Tq

Ouput

Drive

Size

48EAE Series Tool Memory Parameters - Air LB Tool Connector

Model Number Max Speed