274790 Hose, 2 ft.
274 791 Hose, 4 ft.
274792 Hose, 6 ft.
274793 Hose, 8 ft.
274794 Hose, 10 ft.
274795 Hose, 12 ft.
274796 Hose, 16 ft.
274797 Hose, 24 ft.
276 150 Hose, 2 ft.
276151 Hose, 4 ft.
276 152 Hose, 6 ft.
276 153 Hose, 8 ft.
276 154 Hose, 10 ft,
276 155 Hose, 12 ft.
276 156 Hose, 16 ft.
Automatic Hoses, FM-1 80, %I in. Diameter
111 094 Hose, 6 ft.
111 095 Hose, 10 ft.
111 096 Hose, 16 ft.
Automatic Hoses, Waterwash, FM-l 80
276739 Hose, 2 ft.
276740 Hose, 4 ft.
276741 Hose, 6 ft.
276742 Hose, 8 ft.
276743 Hose, 10 ft.
276744 Hose, 16 ft,
276745 Hose, 24 ft.
Biaxial Hose, Handgun
310525 Hose, 8 ft.
310526 Hose, 16 ft.
310527 Hose, 8 ft.
310528 Hose, 16 ft.
230V 0.20 1095
230V 0.46 510
230V 0.67 330
230V 0.89 240
230V 1.15 185
230V 1.37 155
230V 1.83 115
230V 2.76 75
2oov 0.23 830
2oov 0.50 390
2oov 0.78 250
2oov 1.03 180
2oov 1.33 140
2oov 1.58 115
2oov 2.10 85
240V
240V
240V
230V 0.20 1094
230V 0.43 511
230V 0.67 332
230V 0.90 239
230V 1.16 185
230V 1.83 113
230V 2.75 75
230V 0.62 361
230V 1.17 183
2oov 0.71 361
2oov 1.35 183
0.79
1.34
2.17
277
164
102
0 Nor&on Corporabon 1992
All RigMs Reserved
PIN 108 38lA
41-180 ii/92
9-4 Specifications and Technical Data
Table 9.1 - Electrical Current and Resistance Values (continued)
Part No. Description Voltage Current Resistance
WC) (in Amperes at (in Ohms at
SOoF/ 77%) 75’F/24’C)
Biaxial Hose, Automatic
101 296 Hose, 8 ft. 230V N/A N/A
101 767 Hose, 16 ft. 230V N/A N/A
101768 Hose, 8 ft. 2oov N/A N/A
101 769 Hose, 16 ft. 2oov N/A N/A
Hoses, Deadend and Swirl Spray Handgun
274798 Hose, 8 ft. 230V 0.96 240
274799 Hose, 16 ft. 230V 0.50 115
w Extrusion Guns, FM-l 80
860347 Gun, H201 S-T, 0.008 in. 230V 0.43 529
809 194 Gun, H2012-T, 0.008 in. 230V 0.65 374
809 195 Gun, H201Z-T, 0.012 in. 230V 0.65 374
809 196 Gun, H201 Z-T, 0.016 in. 230V 0.65 374
809 197 Gun, H201Z-T, 0.020 in. 230V 0.65 374
809 198 Gun, H201Z-T, 0.032 in. 230V 0.65 374
809 199 Gun, H201Z-T, 0.040 in. 230V 0.65 374
103 244 Gun, H202Z-T, 0.008 in. 230V 0.91 249
715 663 Gun, H202Z-T, 0.012 in. 230V 0.91 249
103 225 Gun, H202Z-T, 0.016 in. 230V 0.91 249
103 226 Gun, H202Z-T, 0.020 in. 230V 0.91 249
103 227 Gun, H202Z-T, 0.032 in. 230V 0.91 249
103228 Gun, H202Z-T, 0.040 in. 230V 0.91 249
103229 Gun, H204Z-T, 0.008 in. Close 230V 1.13 186
810114 Gun, H204Z-T, 0.012 in. Close 230V 1.13 186
809 921 Gun, H204Z-T, 0.016 in. Close 230V 1.13 186
103 230 Gun, H204Z-T, 0.020 in. Close 230V 1.13 186
103 231 Gun, H204Z-T, 0.032 in. Close 230V 1.13 186
103233 Gun, H204Z-T, 0.040 in. Close 230V 1.13 186
103234 Gun, H204Z-T, 0.008 in. Expanded 230V 1.52 148
103235 Gun, H204Z-T, 0.012 in. Expanded 230V 1.52 148
103236 Gun, H204Z-T, 0.016 in. Expanded 230V 1.52 148
103237 Gun, H204Z-T, 0.020 in. Expanded 230V 1.52 148
103238 Gun, H204Z-T, 0.032 in. Expanded 230V 1.52 148
103 239 Gun, H204Z-T, 0.040 in. Expanded 230V 1.52 148
Pm 100 3aw
41-180 II/92
0 Nordson Corporation 1992
Ati Rights h3SeNed
Specifications and Technical Data 9-5
Table 9.1 - Electrical Current and Resistance Values (continued)
Part No. Description Voltage
O/AC)
Current Resistance
(in Amperes at (in Ohms at
35O’F/177’C) 75’F/24’C)
Extrusion Guns, FM-l 80 (continued)
103 593 Gun, H208Z-T, 0.008 in. 230V 1.76 123
103 594 Gun, H208Z-T, 0.012 in. 230V 1.76 123
103 596 Gun, H208Z-T, 0.016 in. 230V 1.76 123
103 597 Gun, H208Z-T, 0.020 in. 230V 1.76 123
103 598 Gun, H208Z-T, 0.032 in. 230V 1.76 123
103 599 Gun, H208Z-T, 0.040 in. 230V 1.76 123
103 612 Gun, H201Z-TW, 0.008 in. 230V 0.65 355
103 613 Gun, H201 Z-TW, 0.012 in. 230V 0.65 355
103 614 Gun, H201Z-TVV, 0.016 in. 230V 0.65 355
103 615 Gun, H201Z-TW, 0.020 in. 230V 0.65 355
103 616 Gun, H201Z-TW, 0.032 in. 230V 0.65 355
103 617 Gun, H201Z-TW, 0.040 in. 230V 0.65 355
103 606 Gun, H202Z-lW, 0.008 in. 230V 0.98 234
103 607 Gun, H202Z-lW, 0.012 in. 230V 0.98 234
103 608 Gun, H202Z-lW, 0.016 in. 230V 0.98 234
103 609 Gun, H202Z-lW, 0.020 in. 230V 0.98 234
103 610 Gun, H202Z-TW, 0.032 in. 230V 0.98 234
103 611 Gun, H202Z-lW, 0.040 in. 230V 0.98 234
103 600 Gun, H204Z-TW, 0.008 in. 230V 1.22 191
103 601 Gun, H204Z-TW, 0.012 in, 230V 1.22 191
103 602 Gun, H204Z-PA/, 0.016 in. 230V 1.22 191
103 603 Gun, H204Z-TW, 0.020 in. 230V 1.22 191
103 604 Gun, H204Z-lW, 0.032 in. 230V 1.22 191
103 605 Gun, H204Z-IVV, 0.040 in. 230V 1.22 191
Handguns and Filter
274 765 Handgun, AD-31 T 230V 0.35 661
274 752 Handgun, AD-31T-L 2oov 0.40 500
310 653 Handgun, AD-31 FM 230V 0.26 699-
310 733 Handgun, AD-31 FM 2oov 0.30 650-
101 206 Handgun, AD-31 STR 230V 0.35 661
809 652 Heated In-Line Filter 230V 0.63 368
-These guns have 2 heaters in parallel. Resistance values are for a single heater. The resistance value, if read for the entire gun
will be I& the number shown
0 Nordson Corporation 1992
All Rghts Reserved
PIN 109 39lA
41-180 11192
9-6 Specifications and Technical Data
3. Material Safety Data
lnforma tion
I. IDENTlW
Product Name
Nordson Part No.
Chemical Name
II. HAZARDOUS INGREDIENTS
None
Ill. PHYSICAL DATA
Boiling Point
Vapor Pressure
Vapor Density
Water Solubility
Appearance and Odor
Percent Volatile by Volume
Evaporation Rate
Specific Gravity
IK FIREAND EXPLOSION HAZARD DATA
Flash Point
Extinguishing Media
Flammability Limits
Special Firefighting Procedures
Unusual Fire and Explosion Hazards
\I: HEALTH HAZARD DATA
Threshold Limit Value
Effects of Overexposure
Emergency First Aid Procedures:
Inhalation
Eye Contact
Skin Contact
Nordson Type R Solvent
270 755 (1 Gallon)
270 756 (5 Gallon)
270 757 (55 Glallon)
Adipate Polyester Plasticizer
>6OO”F (92.2%)
co.01 mm Hg (3 68°F (20°C)
N/A
Negligible .
Viscous, clear liquid
Mild, inoffensive odor
0%
Negligible
(Butyl Acetate = 1)
1.09
572°F (300°C) COC
CO2, Dry Chemical, Water Fog
Not Available
Wear MESA/NIOSH-approved, self-contained breathing
apparatus. Use water spray to cool fire-exposed containers.
Water may came frothing
Not determined by ACGIH
Liquid may cause mild eye irritation.
Repeated or prolonged skin contact may cause irritation. I
Move subject to fresh air.
Remove contact lenses. Hold eyelids away from eyeballs to
assure thorough rinsing. Flush eyes with large amounts of
water for at least 15 minutes. Consult physician if irritation
persists.
Wash affected skin areas with soap and water.
pm toa3am
41-180 11192
0 Nordson Corporation 1992
All Rights ReseNed
SDecifkations and Technical Data 9-7
3. Material Safety Data
lnforma tion
(continued)
VI. REACTlVlW DATA
Stability
Conditions to Avoid
lncompatability (materials to avoid)
Hazardous Decomposition Products
Hazardous Polymerization
Stable
None
Strong oxidizers
None under normal conditions of use. Oxides of carbon
when burned.
Will not occur.
VII. SPILL OR LEAK PROCEDURES
Steps to Be Taken If Material Released or Spilled
Waste Disposal Method
Dike and contain spill with inert material (sand, earth,
Fuller’s Earth, etc.) and transfer liquid and solid diking
materials tlo separate containers for recovery and disposal.
Wash floor with hot water and solution of “Oakite” or
equivalent,. Remove contaminated clothing and wash
before reuse. Wash affected skin areas with soap and
water. Keep spill out of sewers and open bodies of water.
Incinerate liquid in approved equipment.
Landfill contaminated diking materials according to current
local, state and federal regulations.
VIII. SPECLAL PROTECTION INFORMATION
Respiratory Protection
Ventilation
Protective Gloves
Eye Protection
Other
None required for normal operations
Normal room ventilation
Impervious
Do not wear contact lenses.
Splashgoggles (ANSI 287.1, 1979)
Eyewash facility
Impervious apron
IX. SPECIAL PRECAUTIONS
Precautions to Be Taken in Handling and Storage Stainless steel and aluminum are acceptable for storage.
Recommended storage temperature is 80°F (27°C).
Material freezes below 41 “F (5°C).
X. NFPA 704M RATINGS
Health Hazard 1
Flammability 2
Reactivity 0
Other Hazards None
0 Nordson Corporabon 1992
All Rights Reserved
PIN 108 38lA
41-180 ii/92

SECTION 10
Optional Parts and Equipment
FM-180 Hose Lists ..................................... 10-l
FM-180 Extrusion Gun Lists .............................. 10-3
Special Hose/Gun Equipment Lists ........................ 10-5
Accessory Equipment List ............................... 10-6
Kalrez O-Rings ........................................ 10-7
Kalrez Assemblies and Special Units ....................... 1 O-7
Q Nor&on Corporation 1992
All Rights Reserved
P/N 108 381A
41-10011/92

Optional Parts and Eauipment IO-1
Section 10
Optional Parts and Equipment
FM-180 Hose Lists
Part No. Description
Automatic Hoses, FM-l 80, %s in. Diameter
274 790 Hose, 2 ft., 230V
274 791 Hose, 4 ft., 230V
274 792 Hose, 6 ft., 230V
274 793 Hose, 8 ft., 230V
274 794 Hose, 10 ft., 230V
274 795 Hose, 12 ft., 230V
274 796 Hose, 16 ft., 230V
274 797 Hose, 24 ft., 230V
276 150 Hose, 2 ft., 200V
276 151 Hose, 4 ft., 200V
276 152 Hose, 6 ft., 200V
276 153 Hose, 8 ft., 200V
276 154 Hose, 10 ft., 200V
276 155 Hose, 12 ft., 200V
276 156 Hose, 16 ft., 200V
Automatic Hoses, FM-1 80, % in. Diameter
111 094 Hose, 6 ft., 230V
111 095 Hose, 10 ft., 230V
111 096 Hose, 16 ft., 230V
Automatic Hoses, Water Wash, FM-l 80, 5/rs in. Diameter
276 739 Hose, 2 ft., 230V
276 740 Hose, 4 ft., 230V
276 741 Hose, 6 ft., 230V
276 742 Hose, 8 ft., 230V
276 743 Hose, 10 ft., 230V
276 744 Hose, 16 ft., 230V
276 745 Hose, 24 ft., 230V
Biaxial Hoses, Handgun, s/is in. Diameter
310 525 Hose, 8 ft., 230V
310 526 Hose, 16 ft., 230V
310 527 Hose, 8 ft., 200V
310 528 Hose, 16 ft., 200V
8 Nordson Corporabon 1992
All Rights Reserved
P/N 108 381A
41-180 11192
IO-2 Optional Parts and Equipmet
FM-180 Hose Lists
(continued)
Part No. Description
Biaxial Hoses, Automatic, %s in. Diameter
101 296 Hose, 4 ft., 230V
101 767 Hose, 6 ft., 230V
101 768 Hose, 10 ft., 230V
101 769 Hose, 16 ft., 230V
Hoses, Deadend and Swirl Spray, Handgun, %rs in. Diameter
274 798 Hose, 8 ft., 230V
274 799 Hose, 16 ft., 230V
PM 108 381A
41-180 11/92
Q Nordson Corporation 1992
All Rights Reserved
Optional Parts and Eaubment 1 o-3
FM-180 Extrusion Gun Lists
Part No. Description
Automatic, Spray, Single-Module, H200* (contact your Nordson representative for required heat exchanger
options)
860 347 Gun, H201 S-T, 0.018 in., 230V
Automatic, Single-Module, Non-Circulating, Zero Cavityy, H200*
809 194 Gun, H20lZ-T, 0.008 in., 230V
809195 Gun, H201 Z-T, 0.012 in., 230V
809196 Gun, H20lZ-T, 0.016 in., 230V
809197 Gun, H20lZ-T, 0.020 in., 230V
809198 Gun, H20lZ-T, 0.032 in., 230V
809199 Gun, H20lZ-T, 0.040 in., 230V
Automatic, Multi-Module, Non-Circulating, Zero Cavity, H200*
103224 Gun, H202Z-T, 0.008 in., 230V
715663 Gun, H202Z-T, 0.012 in., 230V
103225 Gun, H202Z-T,0.016 in.,230V
103226 Gun, H202Z-T,0.020 in.,230V
103227 Gun, H202Z-T,0.032 in.,230V
103228 Gun, H202Z-T,0.040 in.,230V
103229 Gun, H204Z-T, 0.008 in., Close, 230V
810114 Gun, H204Z-T, 0.012 in., Close, 230V
809921 Gun, H204Z-T, 0.016 in., Close, 230V
103230 Gun, H204Z-T, 0.020 in., Close, 230V
103231 Gun, H204Z-T, 0.032 in., Close, 230V
103233 Gun, H204Z-T, 0.040 in., Close, 230V
Automatic, Multi-Module, Non-Circulating, Zero Cavity, H200*
103234 Gun, H204Z-T, 0.008 in., Expanded, 230V
103235 Gun, H204Z-T, 0.012 in., Expanded, 230V
103236 Gun, H204Z-T, 0.016 in., Expanded, 230V
103237 Gun, H204Z-T, 0.020 in., Expanded, 230V
103238 Gun, H204Z-T, 0.032 in., Expanded, 230V
103239 Gun, H204Z-T, 0.040 in., Expanded, 230V
103593 Gun, H208Z-T, 0.008 in., 230V
103594 Gun, H208Z-T,0.012 in.,230V
103596 Gun, H208Z-T,0.016 in.,230V
103597 Gun, H208Z-T,0.020 in.,230V
103598 Gun, H208Z-T, 0.032 in., 230V
103599 Gun, H208Z-T, 0.040 in., 230V
l Requires circulation block kit or gun installation kit; see Special Hose/Gun Equipment List in this section.
Q Nordson Corporation 1992
AU Rights Reserved
P/N 108 30lA
41-100 lll92
1 o-4 Optional Parts and EauiDmet
FM-180 Extrusion Gun Lists
(continued)
Part No. Description
Automatic, Water Wash, Single-Module Non-Circulating, Zero Cavity, H200*
103 612
103 613
103 614
103 615
103 616
103 617
-
103 606
103 607
103 608
103 609
103 610
103 611
103 600
103 601
103 602
103 603
103 604
103 605
Gun, H20lZ-TW, 0.008 in., 230V
Gun, H20lZ-lW, 0.012 in., 230V
Gun, H20lZ-lW, 0.016 in., 230V
Gun, H20lZ-lW, 0.020 in., 230V
Gun, H20lZ-TVV, 0.032 in., 230V
Gun, H20lZ-TW, 0.040 in., 230V
Automatic, Water Wash, Multi-Module, Non-Circulating, Zelro Cavity, H200*
Gun, H202Z-TW, 0.008 in., 230V
Gun, H202Z-TW, 0.012 in., 230V
Gun, H202Z-TVV, 0.016 in., 230V
Gun, H202Z-TVV, 0.020 in., 230V
Gun, H202Z-TW, 0.032 in., 230V
Gun, H202Z-TW, 0.040 in., 230V
Gun, H204Z-lW, 0.008 in., 230V
Gun, H204Z-TW, 0.012 in., 230V
Gun, H204Z-TVV, 0.016 in., 230V
Gun, H204Z-TW, 0.020 in., 230V
Gun, H204Z-lW, 0.032 in., 230V
Gun, H204Z-lW, 0.040 in., 230V
Handgun, Deadend*
274 765
274 752
AD-3lT, 230V (for s/s in. hose)
AD-3lT-L, 200V (for %s in. hose)
Handgun, Biaxial
310 653
310 733
AD-31 FM, 230V
AD-31 FM, 200V
Handgun, Swirl Spray+*
101 206 AD-31 STR, 230V
* Requires circulation block kit or gun installation kit; see Special Hose/Gun Equipment Lists in this section.
* Requires hose (P/N 274 791) hose/gun connector (P/N 310 226) and Viton o-ring (P/N 945 025); order one h/g connector
and o-ring per gun. Swirl Spray Handgun requires Air Line Kit (P/N 324 287).
Pm 108 38lA
41-180 11192 Q Nordson Corporation 1992
All Rights Reserved
Special Hose/Gun Equipment Lists
Optional Parts and Equipment IO-5
Part No. Deswiption
m Circulation Block Kits (use to connect hoses to guns with one hydraulic port)
310 787
310 788
310 789
310 790
310 791
310 792
Biaxial Hose, 90 degrees
Biaxial Hose, 45 degrees
Biaxial Hose, Straight-In
Standard Hose, 90 degrees
Standard Hose, 45 degrees
Standard Hose, Straight-In
- Kits, Installation, Gun (use if 2 hydraulic connections acre available on gun)
310 198 Kit, Installation, Gun, H200
Optional Hydraulic Fittings
972 628* Connector, Straight (gun to 5/16 in. diameter automatic hose)
719 024* Connector, Straight (gun to 5/i in. diameter automatic hose)
310 281+* Connector, Straight (applicator to s/16 in. diameter automatic hose)
719 023* Connector, Straight (applicator to % in. diameter automatic hose)
972 703 Connector, Straight (applicator to % in. diameter automatic hose, brass)
274 180 Connector, Elbow, 90 degrees (gun to %s in. diameter automatic hose)
274 179 Connector, Elbow, 45 degrees (gun to 5/s in. diameter automatic hose)
219 047 Connector, Elbow, 45 degrees (gun to % in. diameter automatic hose)
973 574 Plug, Pipe (extra port on gun)
973 384 Plug, Pipe (extra port on applicator)
Hose Extension Cords (use to power hoses mounted hydraulically between guns)
809 550 6 ft. Extension Cord
809 549 12 ft. Extension Cord
809 548 16 ft. Extension Cord
271 486 Hose Hanger Kit
274 724* Dust Cap Assembly (Replacement cap for %s in. diameter hose/gun connector)
901 915 Nozzle Cleaning Kit
901 515 Air Filter, 150 psi
901 254 Air Pressure Gauge (Use for air supply to gun)
901 028
901 050
3-Way Relay Valve, Air Piloted
Relay Valve
Installation Kit
* Shipped with each gun and each hose
. * Shipped with each hose
Q Nordson Corporation 1992 P/N 100 30lA
All Rights Reserved 41-180 lll92
IO-6 Optional Parts and Equipmet
Accessory Equipment List
Part No. Description
296 163 Encoder Kit, 500-Pulse
296 162 Encoder Kit, 200-Pulse
296 144 Friction Wheel, 0.50 meter circumference (use with either encoder kit)
719 025 Valve, Relief, 1,200 psi (for use with %I in. hoses)
809 057 Level Control
271 382 Gas Cylinder Installation Kit, Carbon Dioxide
273 170 Gas Cylinder Installation Kit, Nitrogen
310 136 Density Control Slug (high-viscosity)
310 864 Kit, Remote Operator Station
274 428 Hydraulic Pressure Gauge Kit
161 104
161 106
161 109
161 112
161 115
161 120
Hydraulic Filter Screens (optional applicator filter screens)
0.004 in. (0.10 mm) Mesh
0.006 in. (0.15 mm) Mesh
0.009 in. (0.23 mm) Mesh
0.012 in. (0.30 mm) Mesh
0.015 in. (0.38 mm) Mesh
0.020 in. (0.51 mm) Mesh
w Non-Heated In-Line Filter
274 290 Filter, Straight, 0.011 in. (0.28 mm) 50 Mesh
274 291 Filter, Straight, 0.006 in. (0.15 mm) 100 Mesh
274 292 Filter, Straight, 0.003 in. (0.008 mm) 200 Mesh
805 877 Filter, 45 degrees, 0.011 in. (0.28 mm) 50 Mesh
805 878 Filter, 45 degrees, 0.006 in. (0.15 mm) 100 Mesh
805 879 Filter, 45 degrees, 0.003 in. (0.08 mm) 200 Mesh
274 287 Filter, 90 degrees, 0.011 in. (0.28 mm) 50 Mesh
274 288 Filter, 90 degrees, 0.006 in. (0.15 mm) 100 Mesh
274 289 Filter, 90 degrees, 0.003 in. (0.08 mm) 200 Mesh
805 138 Filter Element, 0.028 in. (0.71 mm) 24 Mesh
271 598 Filter Element, 0.011 in. (0.28 mm) 50 Mesh
271 599 Filter Element, 0.006 in. (0.15 mm) 100 Mesh
271 600 Filter Element, 0.003 in. (0.08 mm) 200 Mesh
809 652 Filter, Heater In-Line
272 620 Arc Suppressor
901 515 Filter, Air, 150 psi
973 032 Nipple, Pipe, ‘1’4 NPT (use for run-up control air supply)
PM 108 381A
41-180 11192
(B Nordson Corporation 1992
All Rights Reserved
Optional Parts and Equipment 1 o-7
Kalrez O-Rings
Nordson Kalrez Assy. Nordson Kalrez O-Ring
P/N P/N O-Ring P/N P/N
Location Required
719 102
719 119
310 281 945 025 719 080 Processor-to-Hose Fittings (?/9 in.) 4
940 141 719 073
942 111 719 076
Run-up valve 2
Specialists in Thermoplastic Piping systems
© 2014 F. W. Webb Company
Formerly known as USCO / Utilities Supply Company
Roytronic Excel
Series “AD”
Electronic
Metering Pumps
See Page 59
F-400N Series
Flowmeters
See Page 3
AIR-PRO®
Compressed Air
Piping System
See Page 144
515 Rotor-X
Polypropylene
Flow Sensor
See Page 13
TM Series ½"-2"
Computer Display
and Digital Pulse
Meters
See Page 9
Self-Aligning
Bulkhead
Fittings
See Page 94
Par Barb
Thermoplastic
Fittings
See Page 136
Open Top
Polyethylene
Storage Tanks
See Page 88
POLYLINE™ Filter
Housings
See Page 77
Parflex Polyethylene
Tubing Instrument
Grade
See Page 130
Flowmeters &
Process Control
Valves
Pumps
Gauges
Filters &
Strainers
Tanks
Level Control
Tools &
Accessories
Pipe, Fittings
& Cement
Hose, Tubing
& Fittings
Specialty Piping
Products
Order Online Laboratory and
Specialty Valve
See Page 45
YS Series
Plastic
Y-Strainers
½" to 4"
See Page 80
Chemical
Gauge Guards
See Page 74
Vol. 11
Since 1866
For easy toll-free ordering:
1-800-343-7555
For convenient online ordering:
fwwebb.com/plastics
2014FC-Vol11.indd 1 3/31/14 8:21 AM
Contents
Flowmeters &
Process Control 3-27
28 Chart Recorders
29-54 Valves
55-73 Pumps
74-76 Gauges
77-82 Filters & Strainers
83-94 Tanks
95, 96 Portable Mixers
97-104 Level Control
105-108 Tools & Accessories
109 Machining Shapes & Profiles
110-124 Pipe, Fittings & Cement
125, 126 Pipe Hangers, Strut & Accessories
127-141 Hose, Tubing & Fittings
142, 143 Duct Fittings & Blowers
144-147 Specialty Piping Products
Quick and Easy Ordering & Information
Expanded inventory in our
70,000+ square foot facility.
A diverse inventory to meet your
project requirements.
Local delivery, UPS, FedEx, and common
carrier – next day in most cases.
By Phone: 1-800-343-7555
Each of our sales representatives is a trained industry
specialist. Any questions you might have can be handled
over the phone by any catalog representative.
By Fax: 1-800-232-8726
For application questions: FAX us your order for immediate
processing or if You have questions; FAX us your
order application requirements. Within 24 hours We’ll
FAX back our recommendations and prices.
By E-mail: plastics@fwwebb.com
For orders, quotes of questions of a product or application
we will respond quickly. We can provide specifications,
installation, information or links related to your product. We
will respond within 4 business hours of receiving your E-mail.
By Internet: fwwebb.com/plastics
Place your order easily online with our E-commerce site.
Order online 24 hours 7 days a week. Open your own
account or simply use a credit card. Follow the latest
Industry News and Tech Center that host a wealth of key
Information for a successful industrial plastic piping system.
Instant Chat: Visit our homepage
While online text with any questions you may have
immediately about a product or application.
Facebook: facebook.com/webbplastics
While online see the different product
offerings and the latest news from our
manufactures. Leave a comment and
hopefully LIKE us and receive a
FREE pen.
*
Technical Support
1-800-343-7555 If you have any questions while installing
a product, call and ask for Applications Support.
Shipping
Most orders shipped
in 24 hours or less. All orders shipped via UPS or Fed-Ex
unless another carrier is specified. Shipping charges are added
to your order. If you need help, please ask!
Specification Sheets
Are available prior to purchase. Specify the product and your
Customer Representative will mail or fax you one.
Purchase Orders
We ship Open Account in most cases. Terms Net 30 from
invoice date.
Credit Cards
Visa, MasterCard, Discover and American Express
Buyer Information
Warranty terms and conditions vary by product. A copy of
Manufacturer’s warranty can be provided on request. F. W. Webb
carries original manufacturer’s product warranties. Users or
installers assume all risk and liability which may result from the
use or installation of any products purchased from this catalog.
Warranty/Product Returns
Returns must include an F. W. Webb RA number and in some
cases original packaging. Most items can be returned for a
prompt exchange, credit or refund. A Manufacturer’s restock
charge may apply to non-standard items. We will make every
attempt to keep your experience hassle free!
100% SATISFACTION GUARANTEE
Plain and Simple… If for any reason you are unhappy
with your purchase, let us know so we can make it right.
Nothing less than your complete satisfaction is our goal.
Mail product returns and
purchase orders to:
F. W. Webb Company
Thermoplastic Piping Division
98 Lindbergh Avenue
Methuen, MA 01844
Mail all remittances to:
160 Middlesex Turnpike
Bedford, MA 01730
1-800-343-7555
In MA 781-395-9023
FAX: 1-800-232-8726
Prices subject to change without notice.
Not responsible for typographic errors.
Deliveries made daily here in the Northeast.
All FW WEBB
products are backed
by a 100% Satisfaction
Guarantee.
Call for answers to
all your sales and
technical questions.
YOUR
SALES
TEAM:
Dave McGlynn
Ian Power
John O'Brien
Dave Prunier
Mike Backus
Stephen McGlynn
Patrick Coutermarsh
Jim Matthews
All FW WEBB
products are backed
by a 100% Satisfaction
Guarantee.
Visit fwwebb.com/plastics
02_02 3/31/14 8:58 AM Page 2
F-400N Series
Flowmeters
FEATURES
n Tough machined acrylic meter body, highly polished to a clear finish.
n Direct reading permanent scale with white back reflector for easy reading.
n Sturdy adapters with high grade Viton O-ring seals.
n Standard models #316 stainless steel float guide rods. (Optional K-Series hastelloy C-276).
n Standard models #316 stainless steel, PVDF, Teflon float. (Optional K-Series hastelloy C-276, PVDF, Teflon).
n Acceptable in direct sunlight applications.
n Available OEM options: private labeling, custom calibrations, custom materials.
Dual Scale Range Adapter Adapter Float
Item # Webb # GPM LPM Size Material Material Price
F-40250LN-4 441536 0.025 to 0.250 0.1 to 1.0 1
⁄4" F/NPT Polypropylene PVDF $88.67
F-40250LN-6 441537 0.025 to 0.250 0.1 to 1.0 3
⁄8" F/NPT Polypropylene PVDF 88.67
F-40050LN-4 441527 0.050 to 0.500 0.2 to 2.0 1
⁄4" F/NPT Polypropylene 316SS 88.67
F-40050LN-6 441528 0.050 to 0.500 0.2 to 2.0 3
⁄8" F/NPT Polypropylene 316SS 88.67
F-40375LN-6 230258 0.1 to 1.0 0.4 to 4.0 3
⁄8" F/NPT Polypropylene Teflon 88.67
F-40375LN-8 560259 0.1 to 1.0 0.4 to 4.0 3
⁄8" F/NPT Polypropylene Teflon 75.84
F-40376LN-6 441546 0.2 to 2.0 1.0 to 7.5 3
⁄8" F/NPT Polypropylene 316SS 75.84
F-40376LN-8 230261 0.2 to 2.0 1.0 to 7.5 1
⁄2" F/NPT Polypropylene 316SS 75.84
F-40377LN-6 441553 0.3 to 3.0 1.5 to 11 3
⁄8" F/NPT Polypropylene 316SS 81.76
F-40377LN-8 230263 0.3 to 3.0 1.5 to 11 1
⁄2" F/NPT Polypropylene 316SS 81.76
F-40500LN-6 230264 0.5 to 5.0 2.0 to 20 3
⁄8" F/NPT Polypropylene 316SS 75.84
F-40500LN-8 230265 0.5 to 5.0 2.0 to 20 1
⁄2" F/NPT Polypropylene 316SS 75.84
F-40750LN-12 230266 1 to 10 4 to 38 3
⁄4" F/NPT Polypropylene 316SS 146.10
F-40750LN-16 230267 1 to 10 4 to 38 1" F/NPT Polypropylene 316SS 146.10
F-41017LN-12 230270 1 to 17 4 to 64 3
⁄4" F/NPT Polypropylene 316SS 146.10
F-41017LN-16 230271 1 to 17 4 to 64 1" F/NPT Polypropylene 316SS 146.10
F-41000LN-12 230268 2 to 20 8 to 80 3
⁄4" F/NPT Polypropylene 316SS 146.10
F-41000LN-16 230269 2 to 20 8 to 80 1" F/NPT Polypropylene 316SS 146.10
Quick Spec
n Maximum Working Pressure:
150 psig (10.3 Bar)
@ 70°F (21°C)
n Maximum Fluid Temperature:
Polypropylene adapters -
150°F (65°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material:
Machined acrylic
n Adapter Material: Polysulfone
n O-ring Seals: Viton (optional EP)
PIPE SIZES: 1
⁄4", 3
⁄8", 1
⁄2", 3
⁄4" 1" F/NPT
As Low As
$
7584
Standard Models for Liquid with 316 SS Guide Rods
F-420N Series
Flowmeters
FEATURES
n Tough machined acrylic meter body, highly polished to a clear finish.
n Direct reading permanent scale with white back reflector for easy reading.
n Sturdy adapters with high grade Viton O-ring seals.
n Standard models #316 stainless steel float guide rods. (Optional K-Series hastelloy C-276).
n Acceptable in direct sunlight applications.
n Available OEM options: private labeling, custom calibrations, custom materials.
Quick Spec
n Maximum Working Pressure:
130 psig (8.9 Bar)
@ 70°F (21°C)
n Maximum Fluid Temperature:
130°F (54°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material:
Machined acrylic
n O-ring Seals: Viton (optional EP)
Dual Scale Range Adapter Adapter Float
Item # Webb # GPM LPM Size Material Material Price
F-42025LN-16 435792 5 to 25 20 to 100 1" F/NPT PVC 316SS $211.91
F-42025LN 435791 5 to 25 20 to 100 11
⁄2" M/NPT PVC 316SS 211.91
F-42040LN-16 435796 8 to 40 30 to 150 1" F/NPT PVC 316SS 211.91
F-42040LN 435795 8 to 40 30 to 150 11
⁄2" M/NPT PVC 316SS 211.91
F-42050LN-16 435800 10 to 50 40 to 200 1" F/NPT PVC 316SS 211.91
F-42050LN 435799 10 to 50 40 to 200 11
⁄2" M/NPT PVC 316SS 211.91
PIPE SIZES:
1" F/NPT, 11
⁄2" M/NPT
Standard Models for Liquid with 316 SS Guide Rods
F-430N Series
Flowmeters
FEATURES
n Tough machined acrylic meter body, highly polished to a clear finish.
n Direct reading permanent scale with white back reflector for easy reading.
n Sturdy adapters with high grade Viton O-ring seals.
n Standard models #316 stainless steel float guide rods. (Optional K-Series hastelloy C-276).
n Acceptable in direct sunlight applications.
n Available OEM options: private labeling, custom calibrations, custom materials.
n Optional Polypropylene and CPVC Adapters available.
Quick Spec
n Maximum Working Pressure:
130 psig (8.9 Bar)
@ 70°F (21°C)
n Maximum Fluid Temperature:
130°F (54°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material:
Machined acrylic
n O-ring Seals: Viton (optional EP)
Dual Scale Range Adapter Adapter Float
Item # Webb # GPM LPM Size Material Material Price
F-43040LNS-24 435761 4 to 40 15 to 150 11
⁄2" F/NPT PVC 316SS $548.31
F-43040LNS 435760 4 to 40 15 to 150 2" F/NPT PVC 316SS 548.31
F-43060LNS-24 435765 6 to 60 20 to 230 11
⁄2" F/NPT PVC 316SS 548.31
F-43060LNS 435764 6 to 60 20 to 230 2" F/NPT PVC 316SS 548.31
F-43080LNS-24 435769 8 to 80 30 to 300 11
⁄2" F/NPT PVC 316SS 548.31
F-43080LNS 435768 8 to 80 30 to 300 2" F/NPT PVC 316SS 548.31
F-43100LNS-24 435773 20 to 100 75 to 375 11
⁄2" F/NPT PVC 316SS 548.31
F-43100LNS 435772 20 to 100 75 to 375 2" F/NPT PVC 316SS 548.31
PIPE SIZES:
11
⁄2", 2" F/NPT
Standard Models for Liquid with 316 SS Guide Rods
F410N Series
Flowmeters and Process Controls
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 3
03_03 3/30/14 7:58 AM Page 3
F-440 Series Flowmeter PIPE SIZES: 3
⁄8", 1
⁄2", 3
⁄4" M/NPT
PIPE SIZES: 3
⁄8" F/NPT, 1
⁄2", 3
⁄4" M/NPT
FEATURES
n Tough Polysulfone meter body resists high
temperatures and pressures.
n Compact size for tight installation spaces.
n 2" scale length (approximate).
n Direct reading permanent scale.
n In-line or panel mount configurations avail.
n Optional integral flow adjustment valve.
n Standard models #316 stainless steel float
guide rods. (Optional K-Series hastelloy C-276).
n Not recommended for direct sunlight.
n Available OEM options: private labeling,
custom calibrations, custom materials.
Pipe Dual Scale Range Float In-Line Models Panel Mount Models Adjustable Models
Size GPM LPM Material Item # Price Item # Price Item # Price
3
⁄8" M/NPT 0.025 to 0.250 0.1 to 1.0 PVDF F-44250L-6 $73.40 F-44250LE-6 $88.28 F-44250LA-6 $131.04 1
⁄2" M/NPT 0.025 to 0.250 0.1 to 1.0 PVDF F-44250L-8 73.40 F-44250LE-8 88.28 F-44250LA-8 131.04 3
⁄8" M/NPT 0.1 to 1.0 0.4 to 4.0 316 SS F-44375L-6 73.40 F-44375LE-6 88.28 F-44375LA-6 131.04 1
⁄2" M/NPT 0.1 to 1.0 0.4 to 4.0 316 SS F-44375L-8 73.40 F-44375LE-8 88.28 F-44375LA-8 131.04 3
⁄8" M/NPT 0.2 to 2.0 0.8 to 8.0 316 SS F-44376L-6 73.40 F-44376LE-6 88.28 F-44376LA-6 131.04 1
⁄2" M/NPT 0.2 to 2.0 0.8 to 8.0 316 SS F-44376L-8 73.40 F-44376LE-8 88.28 F-44376LA-8 131.04 3
⁄8" M/NPT 0.5 to 5.0 1.8 to 18.0 316 SS F-44500L-6 73.40 F-44500LE-6 88.28 F-44500LA-6 131.04 1
⁄2" M/NPT 0.5 to 5.0 1.8 to 18.0 316 SS F-44500L-8 73.40 F-44500LE-8 88.28 F-44500LA-8 131.04
GPH LPH 3
⁄8" M/NPT 3.0 to 30.0 10.0 to 110 Teflon F-44330L-6 73.40 F-44330LE-6 88.28 F-44330LA-6 131.04 1
⁄2" M/NPT 3.0 to 30.0 10.0 to 110 Teflon F-44330L-8 73.40 F-44330LE-8 88.28 F-44330LA-8 131.04 3
⁄8" M/NPT 5.0 to 60.0 20.0 to 220 316 SS F-44560L-6 73.40 F-44560LE-6 88.28 F-44560LA-6 131.04 1
⁄2" M/NPT 5.0 to 60.0 20.0 to 220 316 SS F-44560L-8 73.40 F-44560LE-8 88.28 F-44560LA-8 131.04
Quick Spec
n Maximum Working Pressure:
150 psig (10.3 Bar) @ 70°F (21°C)
n Maximum Fluid Temperature:
212°F (100°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material: Polysulfone
n Adapter Material: Polysulfone
n O-ring Seals: Viton (optional EP)
Quick Spec
n Maximum Working Pressure:
150 psig (10.3 Bar) @ 70°F (21°C)
n Maximum Fluid Temperature:
212°F (100°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material: Polysulfone
n Adapter Material: Polysulfone
n O-ring Seals: Viton (optional EP)
Standard Models for Liquid with 316 SS Guide Rods
Pipe Dual Scale Range Float In-Line Models Panel Mount Models Adjustable Models
Size GPM LPM Material Item # Price Item # Price Item # Price
3
⁄8" F/NPT 0.1 to 1.0 0.4 to 4.0 Teflon F-45375L-6 $77.26 F-45375LE-6 $72.04 F-45375LA-6 $134.32 1
⁄2" M/NPT 0.1 to 1.0 0.4 to 4.0 Teflon F-45375L-8 77.26 F-45375LE-8 72.04 F-45375LA-8 134.32 3
⁄8" F/NPT 0.2 to 2.0 1.0 to 7.5 316 SS F-45376L-6 77.26 F-45376LE-6 72.04 F-45376LA-6 134.32 1
⁄2" M/NPT 0.2 to 2.0 1.0 to 7.5 316 SS F-45376L-8 77.26 F-45376LE-8 72.04 F-45376LA-8 134.32 3
⁄8" F/NPT 0.5 to 5.0 2.0 to 20.0 316 SS F-45500L-6 77.26 F-45500LE-6 72.04 F-45500LA-6 134.32 1
⁄2" M/NPT 0.5 to 5.0 2.0 to 20.0 316 SS F-45500L-8 77.26 F-45500LE-8 72.04 F-45500LA-8 134.32 3
⁄4" M/NPT 0.5 to 5.0 2.0 to 20.0 316 SS F-45500L-12 77.26 F-45500LE-12 72.04 F-45500LA-12 134.32 3
⁄4" M/NPT 1.0 to 10.0 4.0 to 40.0 316 SS F-45750L-12 77.26 F-45750LE-12 72.04 F-45750LA-12 134.32
Standard Models for Liquid with 316 SS Guide Rods
FEATURES
n Tough Polysulfone meter body resists high
temperatures and pressures.
n 4" approximate scale length for easy reading.
n Direct reading permanent scale.
n In-line or panel mount configurations avail.
n Optional integral flow adjustment valve.
n Standard models #316 stainless steel or
Teflon float. (Optional K-Series hastelloy
C-276 or Teflon).
n Not recommended for direct sunlight.
n Available OEM options: private labeling,
custom calibrations, custom materials.
Pipe Size (A) (B) (C) (D)
In-Line Models
F-45375.... -6 83
⁄8" 2"
F-45375.... -8 87
⁄8" 2"
F-45376.... -6 83
⁄8" 2"
F-45376.... -8 87
⁄8" 2"
F-45500.... -6 83
⁄8" 2"
F-45500.... -8 87
⁄8" 2"
F-45500.... -12 93
⁄8" 2"
F-45750.... -12 10" 2"
Panel Mount Models
F-45375 97
⁄8" 31
⁄8" 2" 89
⁄16"
F-45376 97
⁄8" 31
⁄8" 2" 89
⁄16"
F-45500 97
⁄8" 31
⁄8" 2" 89
⁄16"
F-45750 101
⁄2" 31
⁄4" 2" 93
⁄16"
Adjustable Models
F-45375 97
⁄8" 4" 2" 89
⁄16"
F-45376 97
⁄8" 4" 2" 89
⁄16"
F-45500 97
⁄8" 4" 2" 89
⁄16"
F-45750 101
⁄2" 41
⁄2" 2" 93
⁄16"
Pipe Size (A) (B) (C) (D)
In-Line Models
F-44375 63
⁄16" 111⁄16"
F-44500 63
⁄16" 111⁄16"
F-44750 71
⁄2" 2"
Panel Mount Models
F-44375 7" 41
⁄2" 111⁄16" 515⁄16"
F-44500 7" 41
⁄2" 111⁄16" 515⁄16"
F-44750 15" 41
⁄2" 2" 613⁄16"
Adjustable Models
F-44375 7" 3" 111⁄16" 6"
F-44500 7" 3" 111⁄16" 6"
F-44750 81
⁄8" 3" 2" 613⁄16"
F-450 Series Flowmeter
Adjustable
In-Line Panel Mount Adjustable
In-Line Panel Mount
Flowmeters and Process Controls
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 4
04_04 3/30/14 8:08 AM Page 4
F-452N Series Flowmeter F-451 High Volume Series Flowmeter
Quick Spec
n Maximum Working Pressure:
150 psi/10 bar) @ 70°F/21°C
n Maximum Fluid Temperature:
212°F/100°C @ 0 PSI (PSF Adapters)
130°F/54°C @ 0 PSI (PVC Adapters)
240°F/115°C @ 0 PSI (Brass Adapters)
n Full Scale Accuracy: +/- 3%
n Meter Body Material: Polysulfone
n Adapter Material: 1" Polysulfone & 11
⁄2" PVC
n O-ring Seals: Viton
n Float Material: #316 SS, Hastelloy C
or Teflon depending on calibration
Quick Spec
n Maximum Working Pressure:
150 psi/10 bar) @ 70°F/21°C
n Maximum Fluid Temperature:
200°F/93°C @ 0 PSI
n Full Scale Accuracy: +/- 2%
n Meter Body Material: Polysulfone
n Union Nuts: Glass fiber reinforced Nylon
n Guide Rod Material: 316 SS (Hastelloy
C-276 option)
n O-ring Seals: Viton (EPDM option)
FEATURES
n Polysulfone meter body resists high
temperatures and pressures.
n 316 SS or Hastelloy rod guided float.
n Direct reading permanent scale.
n Not recommended for direct sunlight.
n Available OEM options: private labeling,
custom calibrations and custom materials.
n Available with 90° adapters.
n Available with polycarbonate shield.
n Available with brass adapters.
FEATURES
n 316 SS or Hastelloy rod guided float.
n Direct reading permanent scale.
n Polysulfone meter body resists high temperatures and pressures.
n Not recommended for direct sunlight.
n Adapters and unions re-engineered for increased
protection from misalignment and vibration.
n Available OEM options: private labeling,
custom calibrations and custom materials.
n Available with polycarbonate shield.
MODEL VARIATIONS FOR F-451
LHN = In-Line units (flow through)
LHNE = 90° Elbows for Panel Mount Installation
(M/NPT all models but the F-451006 F/NPT)
LHNC = Units with Polycarbonate Shield
LHKN = In-Line units specially equipped with
Hastelloy C or Teflon float and guide
rod depending on scale range
LHBPN = Units with Brass F/NPT Adapters
LHBSN = Units with Brass Sweat Adapters
 Calibration Price
Item # GPM LPM LHN LHNE LHNC LHKN LHBPN LHBSN
F-451006LHN 0.5 to 6 2 to 22 $237.89 $293.14 $334.74 $433.75 $343.63 $323.63
F-451001LHN 1.0 to 10 4 to 40 253.21 293.14 347.58 433.75 356.35 338.65
F-451002LHN 2.0 to 20 7.5 to 75 249.84 304.51 360.12 466.47 385.35 366.02
F-451003LHN 3.0 to 30 12 to 115 291.18 327.65 385.56 499.96 383.42 364.11
F-451004LHN 4.0 to 40 15 to 155 305.67 340.74 413.14 527.37 402.44 382.63
11
⁄2" F/NPT PVC Adapters LHN LHNC LHKN
F451006LHN-24 0.5 to 6 2 to 22 $266.33 $360.70 $446.89
F451001LHN-24 1.0 to 10 4 to 40 266.33 360.70 446.89
F451002LHN-24 2.0 to 20 7.5 to 75 278.86 373.25 497.58
F451003LHN-24 3.0 to 30 12 to 115 304.30 413.14 513.09
F451004LHN-24 4.0 to 40 15 to 155 318.79 413.14 562.91
Dual Scale Range Adapter Float Guide Rod
Item # GPM LPM Size Material Material LHN LHNC
F-452020LHN 2 to 20 8 to 78 2" Teflon 316SS $513.04 $643.70
F-452060LHN 6 to 60 30 to 230 2" 316SS 316SS 513.04 643.70
F-452080LHN 8 to 80 40 to 300 2" 316SS 316SS 513.04 643.70
F-452100LHN 6 to 100 20 to 380 2" 316SS 316SS 513.04 643.70
F-452130LHN 20 to 130 80 to 500 2" 316SS 316SS 545.88 676.54
F-452175LHN 25 to 175 100 to 675 2" 316SS 316SS 545.88 676.54
Models listed above are LHN variation = Standard units without shield. LHNC = Shielded units.
F-452N Models with F/NPT Adapters for Liquid
F-460/F-461 Series Flowmeter - Rib-Guided Float
Quick Spec
n Maximum Working Pressure:
150 psig (10.3 bar) @ 70°F (21°C)
n Maximum Fluid Temperature:
PVDF adapters: 210°F (98°C) @ 0 PSI
PVC adapters: 130°F (54°C) @ 0 PSI
n Full Scale Accuracy: +/- 21
⁄2%
n Meter Body Material: Polysulfone
n Float Material: Teflon
n O-ring Seals: Viton (EPDM option)
n Butt fusion adapters available
FEATURES
n Direct reading permanent scale.
n Polysulfone meter body with precisely engineered float guide ribs.
n Ideal for corrosive environments such as Deionized Water or other
applications where an all plastic meter is desirable.
n Not recommended for direct sunlight.
n Available OEM options: private labeling,
custom calibrations and custom materials.
n Butt fusion adapters available.
Dual Scale Range Pipe PVC Adapters PVDF Adapters
GPM LPM Size Item # Price Item # Price
 0.1 to 1.2 0.4 to 4.4 1
⁄2" F-46010LX-08P $197.75 F-46010LX-08K $234.82
 0.1 to 1.2 0.4 to 4.4 3
⁄4" F-46010LX-12P 197.75 F-46010LX-12K 234.82
 0.2 to 2.0 0.8 to 8.0 1
⁄2" F-46020LX-08P 197.75 F-46020LX-08K 234.82
 0.2 to 2.0 0.8 to 8.0 3
⁄4" F-46020LX-12P 197.75 F-46020LX-12K 234.82
 0.3 to 3.0 1.0 to 11 1
⁄2" F-46030LX-08P 210.60 F-46030LX-08K 247.19
 0.3 to 3.0 1.0 to 11 3
⁄4" F-46030LX-12P 210.60 F-46030LX-12K 247.19
 0.5 to 5.0 2.0 to 20 1
⁄2" F-46050LX-08P 220.47 F-46050LX-08K 259.53
 0.5 to 5.0 2.0 to 20 3
⁄4" F-46050LX-12P 220.47 F-46050LX-12K 259.53
 1.0 to 10 4.0 to 40 1" F-461100LX-16P 321.32 F-461100LX-16K 367.68
 2.0 to 20 5.0 to 75 1" F-461200LX-16P 321.32 F-461200LX-16K 367.68
 3.0 to 35 12 to 130 1" F-461300LX-16P 321.32 F-461300LX-16K 367.68
Model Variations: PVC Union Nuts - to order, replace"X" with "P". Socket Fusion Adapters available.
F-460 & F-461 Models with F/NPT Adapters for Liquid
PIPE SIZES: 1
⁄2", 3
⁄4", 1" F/NPT
F-460 F-461
F-462 Series Flowmeter -
Rib-Guided Float
Quick Spec
n Maximum Working Pressure:
150 psig (10.3 bar) @ 70°F (21°C)
n Maximum Fluid Temperature: 150°F
(65°C) @ 0 PSI
n Full Scale Accuracy: +/- 21
⁄2%
n Meter Body Material: Polysulfone
n O-ring Seals: Viton (EP option)
FEATURES
n Direct reading permanent scale.
n Polysulfone meter body with precisely engineered float guide ribs.
n Ideal for corrosive environments such as Deionized Water or
other applications where an all plastic meter is desirable.
n Not recommended for direct sunlight.
n Available OEM options: private labeling,
custom calibrations and custom materials.
F-462 Models with F/NPT Adapters for Liquid
No metals in the fluid path!
No metals in the fluid path!
Dual Scale Range Adapter Adapter Float
Item # GPM LPM Size/Type Material Material Price
F-462200LX-32H 2 to 20 8 to 80 2" F/NPT Polysulfone Teflon $560.35
F-462500LX-32H 5 to 50 20 to 200 2" F/NPT Polysulfone Teflon 560.35
F-462800LX-32H 8 to 80 30 to 300 2" F/NPT Polysulfone Teflon 537.51
Model Variations: Polycarbonate Shield - to order, add "C" to the end of Item #. Add-on to price $91.36.
PVC Union Nut - to order, change "X" to "P". Socket Fusion Adapters and Butt Fusion Adapters for Liquid
available.
PIPE SIZES: 2" F/NPT
F-462 Shielded
F452N Shielded
PIPE SIZES:
2" F/NPT
1" F/NPT PVC Adapters
PIPE SIZES: 1", 11
⁄2" F/NPT
BUTT FUSION & SOCKET FUSION FITTINGS FOR F-462
Polypropylene or PVDF Butt Fusion and Socket
Fusion Fittings AVAILABLE for Ultra Pure Applications.
BUTT FUSION & SOCKET FUSION FITTINGS FOR F-460 AND F-461
Polypropylene or PVDF Butt Fusion and Socket
Fusion Fittings AVAILABLE for Ultra Pure Applications.
Flowmeters and Process Controls
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 5
05_05 3/30/14 7:59 AM Page 5
Pipe Dual Scale Range Float Female NPT Models Male NPT Models Sweat Models
Size GPM LPM Material Item # Price Item # Price Item # Price
3
⁄8" 0.1 to 1.0 0.4 to 4.0 316 SS F-44375LB-7 $104.21 1
⁄2" 0.1 to 1.0 0.4 to 4.0 316 SS F-44375LB-9 $104.21 F-44375LB-8 $89.41 3
⁄8" 0.2 to 2.0 0.75 to 7.5 316 SS F-44376LB-7 104.23 1
⁄2" 0.2 to 2.0 0.75 to 7.5 316 SS F-44376LB-9 104.89 F-44376LB-8 89.41 3
⁄8" 0.5 to 5.0 1.8 to 18.0 316 SS F-44500LB-7 104.23 1
⁄2" 0.5 to 5.0 1.8 to 18.0 316 SS F-44500LB-9 104.23 F-44500LB-8 89.41 3
⁄4" 1.0 to 10.0 5.0 to 37.5 316 SS F-44750LB-13 123.27 F-44750LB-12 103.68
 GPH LPH
3
⁄8" 3.0 to 30.0 10.0 to 110 Teflon F-44330LB-7 104.23 1
⁄2" 3.0 to 30.0 10.0 to 110 Teflon F-44330LB-9 104.23 F-44330LB-8 89.40 3
⁄8" 5.0 to 60.0 20.0 to 220 316 SS F-44560LB-7 104.23 1
⁄2" 5.0 to 60.0 20.0 to 220 316 SS F-44560LB-9 104.23 F-44560LB-8 89.40
Standard Models for Liquid with Brass Adapters
Pipe Dual Scale Range Float Male NPT Models Sweat Models
Size GPM LPM Material Item # Price Item # Price
1
⁄2" 0.1 to 1.0 0.4 to 4.0 Teflon F-45375LB-9 $118.95 F-45375LB-8 $104.37 1
⁄2" 0.2 to 2.0 1.0 to 7.5 316 SS F-45376LB-9 118.95 F-45376LB-8 104.37 1
⁄2" 0.5 to 5.0 2.0 to 20.0 316 SS F-45500LB-9 118.95 F-45500LB-8 104.37 3
⁄4" 0.5 to 5.0 2.0 to 20.0 316 SS F-45500LB-13 132.66 F-45500LB-12 121.47 3
⁄4" 1.0 to 10.0 4.0 to 40.0 316 SS F-45750LB-13 141.32 F-45750LB-12 122.26
Standard Models for Liquid with Brass Adapters
PIPE SIZES:
3
⁄8" F/NPT 1
⁄2", 3
⁄4" M/NPT 1
⁄2", 3
⁄4" SWEAT
FEATURES
n Tough Polysulfone
meter body resists high
temperatures and pressures.
n Brass adapters with MPT or
Sweat connections.
Quick Spec
n Maximum Working Pressure:
150 psig (10.3 Bar) @ 70°F (21°C)
n Maximum Fluid Temperature:
240°F (115°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material: Polysulfone
n Adapter Material: Brass
n O-ring Seals: Viton (optional EP)
PIPE SIZES:
1
⁄2", 3
⁄4" M/NPT 1
⁄2", 3
⁄4" SWEAT
FEATURES
n Tough Polysulfone meter
body resists high
temperatures and pressures.
n Brass adapters with MPT or
Sweat connections.
n Brass half unions.
n Direct reading permanent scale.
Quick Spec
n Maximum Working Pressure:
150 psig (10.3 Bar) @ 70°F (21°C)
n Maximum Fluid Temperature:
240°F (115°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material: Polysulfone
n Adapter Material: Brass
n O-ring Seals: Viton (optional EP)
FEATURES
n Durable, highly polished, 1-piece meter body.
n #316 stainless steel floats and float guides.
n Bulkhead nuts attach directly to inside panel.
n Separate mounting screws are not required.
Quick Spec
n Maximum Working Pressure:
250 psig (17.2 Bar) @ 70°F (21°C)
n Maximum Fluid Temperature:
200°F (93°C) @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material: Machined acrylic
n Adapter Material: Polypropylene
n O-ring Seals: Viton (optional EP)
n Float Material: #316SS (optional hastelloy)
PIPE SIZES:
1
⁄4", 1
⁄8" M/NPT
FEATURES
n Impact resistant, one-piece machined
acrylic meter body.
n #316 stainless steel or glass floats (material
depends on meter ordered).
Quick Spec
n Maximum Working Pressure:
150 psi/10 Bar) @ 70°F/21°C
n Maximum Fluid Temperature:
120°F/49°C @ 0 PSI
n Full Scale Accuracy: ±5%
n Meter Body Material: Machined acrylic
n Adapter Material: PVC
n O-ring Seals: Viton
n Float Material: #316SS or Glass
F-440 Series Flowmeter -
Solarmeters® and Engineering Data
F-450N Series Flowmeter -
Solarmeters® and Engineering Data
F-550 Series Panel
Mount Flowmeter
Dual Scale Range Adapter Float Adjustable
Item # GPM LPM Size Material Standard Valve
F-55250L 0.025 to 0.250 0.1 to 1.0 1
⁄4" M/NPT 316SS $90.67 $134.07
F-55375L 0.1 to 1.0 0.4 to 4.0 3
⁄8" M/NPT 316SS 88.02 123.28
F-55376L 0.2 to 2.0 0.75 to 7.5 3
⁄8" M/NPT 316SS 88.02 123.28
F-55500L 0.5 to 5.0 2.0 to 20 1
⁄2" M/NPT 316SS 88.02 123.28
F-55750L 1 to 10 4 to 40 3
⁄4" M/NPT 316SS 104.39 171.79
F-55005L 1 to 5 3 to 18 1" M/NPT Teflon 124.32 181.88
F-55010L 1 to 10 4 to 40 1" M/NPT 316SS 124.32 181.88
F-55015L 1 to 15 5 to 60 1" M/NPT 316SS 124.32 181.88
F-55200L 2 to 20 7.5 to 75 3
⁄4" M/NPT 316SS 124.32 181.88
Note: To order with Flow Adjustment Valve add "A" after the "L" in Item #. Model F-55005L is not available
with Adjustment Valve. For optional hastelloy internals, add "K" to Item #.
F-500E Series Panel Mount Flowmeter
 Dimension-Connector Adapter Float
Item # Calibration Center to Center Size Material Price
F-501E 2 to 20 CFH 3" 1
⁄4" M/NPT Glass $50.61
F-502E 4 to 30 CFH 3" 1
⁄4" M/NPT 316SS 50.61
F-503E 5 to 50 CFH 3" 1
⁄4" M/NPT 316SS 50.61
F-504E 2 to 24 LPM/Air 3" 1
⁄4" M/NPT 316SS 50.61
F-505E 1 to 11 GPH 3" 1
⁄4" M/NPT 316SS 50.61
F-506E 1 to 5 SCFM 3" 1
⁄4" M/NPT 316SS 55.74
F-507E 0.2 to 1.2 GPM 3" 1
⁄4" M/NPT 316SS 55.74
F-508E 12 to 72 GPH 3" 1
⁄4" M/NPT 316SS 55.74
F-509E .7 to 4.5 LPM 3" 1
⁄4" M/NPT 316SS 55.74
F-510E 60 to 300 CFH 3" 1
⁄4" M/NPT 316SS 55.74
F-511E 2 to 20 ML/MIN. 3" 1
⁄8" F/NPT Glass 55.74
F-512E 10 to 100 ML/MIN. 3" 1
⁄8" F/NPT Glass 55.74
F-513E 0.3 to 3.0 OZ/MIN. 3" 1
⁄8" F/NPT Glass 55.74
F-514E 4.0 to 40 OZ/HOUR 3" 1
⁄8" F/NPT Glass 55.74
F-515E 2.0 to 20 OZ/MIN. 3" 1
⁄8" F/NPT 316SS 55.74
n Permanent screen printed scales.
n A wide range of standard calibrations.
n Viton® o-ring seals.
n Excellent accuracy.
n Acceptable in direct sunlight applications.
n Adjustable flow control valve (F-550A only).
n Acceptable in direct sunlight applications.
n White back reflector for easy reading.
n #316 stainless steel float guide rods.
n Not recommended for direct sunlight.
n Available OEM options: private labeling,
custom calibrations, custom materials.
n Brass half unions.
n Direct reading permanent scale.
n #316 stainless steel float guide rods.
n Not recommended for direct sunlight.
n Available OEM options: private labeling,
custom calibrations, custom materials.
PIPE SIZES:
1
⁄4", 3
⁄8", 1
⁄2", 3
⁄4", 1"
Flowmeters and Process Controls
www.facebook.com/webbplastics
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 6
06_06 3/31/14 7:47 AM Page 6
F-300 Series Pitot Tube Flowmeter
 Operating Flow Range FS Model (Sensor Mount) FP Model (Panel Mount) FV Model (Sensor Only)
 OZ/MIN ML/MIN Item # Price Item # Price Item # Price
115V Models with 1
⁄8" F/NPT connections and clear PVC lens
1 to 10 30 to 300 FS1-100-5V $274.43 FP1-100-5V $274.43 FV1-100-5V $174.30
3.5 to 35 100 to 1000 FS1-200-5V 274.43 FP1-200-5V 274.43 FV1-200-5V 174.30
7 to 70 200 to 2000 FS1-300-5V 274.43 FP1-300-5V 274.43 FV1-300-5V 174.30
10 to 100 300 to 3000 FS1-400-5V 274.43 FP1-400-5V 274.43 FV1-400-5V 174.30
17 to 170 500 to 5000 FS1-500-5V 274.43 FP1-500-5V 274.43 FV1-500-5V 174.30
24 to 240 700 to 7000 FS1-600-5V 274.43 FP1-600-5V 274.43 FV1-600-5V 174.30
115V Models with 3
⁄8" OD Tubing connections and clear PVC lens
1 to 10 30 to 300 FS1-100-6V 274.43 FP1-100-6V 274.43 FV1-100-6V 174.30
3.5 to 35 100 to 1000 FS1-200-6V 274.43 FP1-200-6V 274.43 FV1-200-6V 174.30
7 to 70 200 to 2000 FS1-300-6V 274.43 FP1-300-6V 274.43 FV1-300-6V 174.30
10 to 100 300 to 3000 FS1-400-6V 274.43 FP1-400-6V 274.43 FV1-400-6V 174.30
17 to 170 500 to 5000 FS1-500-6V 274.43 FP1-500-6V 274.43 FV1-500-6V 174.30
24 to 240 700 to 7000 FS1-600-6V 274.43 FP1-600-6V 274.43 FV1-600-6V 174.30
n Flow rates from 30 to 7000 millliters/min.
n 3 model variations:
FS = Sensor mounted display
FP = Panel mounted display (w/25' cable)
FV = No display. Sensor only.
5vdc current sinking output
n 6 digit LCD, up to 4 decimal positions.
n Displays both rate of flow and total
accumulated flow.
n Open collector alarm setpoint.
n User selectable or custom programmable
scale factors. Flow units: Gallons, Liters,
Ounces, milliliters. Time units: Minutes,
Hours, Days
MICRO-FLO Rate & Total Display
Pipe Size, Flow Range and Display Model Options:
FEATURES
Quick Spec
n Max. Working Pressure:
PVC lens – 130 psig @ 70°F
PVDF lens – 150 psig @ 70°F
n Full scale accuracy: +/- 6%
n Input Power requirement: 8-28 VDC
(Optional AC/DC transformers available)
n Sensor only output: 5V DC digital square
wave (3-wire)
n Sensor output cable: 3-wire shielded cable, 25'
n Enclosure: Weather resistant Valox® PBT
NEMA type 4X, (IP56)
Quick Spec
n Max. Working Pressure 300 psig (20 bar)
@ 70?F (21?C)
n Max. Fluid Temperature 200? F (93?C) @ 0 PSI
n Full scale accuracy +/- 1%
n Sensor/Paddle/Axle material PVDF
n O-ring seals Viton
n Max. pressure drop 8 psi (no significant drop)
n Approximate shipping wt. 4 lb. (1.8kg)
Item # GPM LPM Pipe Size Price
Low Flow
F-301OO(*)R 2 to 10 8 to 38 1" $71.96
F-30125(*)R 5 to 35 30 to 130 11
⁄4" 71.96
F-30150(*)R 8 to 30 30 to 110 11
⁄2" 71.96
F-30200(*)R 15 to 70 60 to 260 2" 77.37
F-30300(*)R 40 to 140 160 to 520 3" 99.49
Item # GPM LPM Pipe Size Price
Standard Flow
F-30100* 5 to 35 20 to 160 1" $71.96
F-30125* 15 to 75 60 to 280 11
⁄4" 71.96
F-30150* 20 to 100 75 to 375 11
⁄2" 71.96
F-30200* 40 to 150 150 to 550 2" 77.37
F-30250* 60 to 240 250 to 900 21
⁄2" 88.28
F-30300* 80 to 300 300 to 1125 3" 99.49
F-30400* 125 to 500 550 to 2000 4" 108.53
F-30600* 250 to 1050 900 to 3900 6" 175.51
F-30800* 500 to 1900 2000 to 7200 8" 195.11
For Horizontal Pipe Installation Well suited for closed
pipe installation. Easy
to read dual scale
(GPM/LPM), screen
printed on both sides of
the meter body.
Horizontal or vertical
pipe installation. One
piece machined acrylic
meter body. Corrosion
resistant internal parts.
D-30150* 20 to 100 75 to 375 11
⁄2" $84.14
D-30200* 40 to 150 150 to 550 2" 90.72
U-30150* 20 to 100 75 to 375 11
⁄2" 87.75
U-30200* 40 to 150 150 to 550 2" 94.58
For Vertical Pipe Installation
CD/CU CF PIPE SIZES: 1", 11
⁄4", 11
⁄2”, 2”, 21
⁄2", 3", 4", 6" & 8" F/NPT
*PVC Pipe add the letter "P" *Copper Tube add the letter "T"
NOTE: If used on Sch 80 PVC pipe will read 12% higher than actual.
OTHER SIZES AVAILABLE - CALL OR VISIT OUR WEBSITE.
FEATURES
n Easy to read 8 digit LCD, up to 4 decimal positions.
n Flow rate and Total flow display.
n AC/DC transformer or battery operated
(RT models only). 4 AA batteries.
n Factory programmed with calibration certificate.
n Field programmable via front panel touch pad.
n Front panel security lockout.
n Total reset function can be disabled.
n Weather resistant ABS enclosure. NEMA 4X.
Note: LCD is not recommended for direct
sunlight applications.
n Panel mounting option available.
n Custom calibration units available.
Contact the factory. FOUR MODEL VARIATIONS: [R][T] = Rate and Totalizer. Transformer or battery operated. [A][O] =
4-20mA, 0-10 VDC analog output, flow rate & totalizer. Transformer operated. [P][C] = Batch processing,
flow rate alarm, proportional chemical metering, flow rate and totalizer. Transformer operated. [A][P] =
 Analog output, batch processing, flow rate alarm, proportional chemical
 metering, flow rate and totalizer.
 Transformer operated.
DIGI-METER® F-2000 Paddlewheel Flowmeter
Pipe Size Model Flow
M/NPT Number Range [RT]* [AO]* [PC]* [AP]*
 3
⁄8" *[ ]S138M1GM1 .8 to 8 $565.76 $765.42 $765.42 $965.11
 3
⁄8" *[ ]S138M2GM2 .4 to 4 565.76 765.42 765.42 965.11
 1
⁄2" *[ ]S150M1GM1 2 to 20 565.76 765.42 765.42 965.11
 1
⁄2" *[ ]S150M2GM2 .5 to 5 565.76 765.42 765.42 965.11
 3
⁄4" *[ ]S175M1GM1 3 to 30 565.76 765.42 765.42 965.11
 3
⁄4" *[ ]S175M2GM2 .8 to 8 565.76 765.42 765.42 965.11
 1" *[ ]S110M1GM1 5 to 50 565.76 765.42 765.42 965.11
 1" *[ ]S110M2GM2 2 to 20 565.76 765.42 765.42 965.11
 11
⁄2" *[ ]S115M1GM1 4 to 40 616.89 816.58 816.58 1,016.26
 11
⁄2" *[ ]S115M2GM2 6 to 60 616.89 816.58 816.58 1,016.26
 11
⁄2" *[ ]S115M3GM3 10 to 100 616.89 816.58 816.58 1,016.26
 2" *[ ]S120M1GM1 4 to 40 629.98 829.64 829.64 1,029.33
 2" *[ ]S120M2GM2 6 to 60 629.98 829.64 829.64 1,029.33
 2" *[ ]S120M3GM3 10 to 100 629.98 829.64 829.64 1,029.33
 2" *[ ]S120M4GM4 20 to 200 629.98 829.64 829.64 1,029.33
Transformer Powered Models on Molded In-Line Polypropylene Body
ALSO AVAILABLE:
Transformer Powered models on Molded In-Line PVDF Body
Transformer Powered models on Machined In-Line Polypropylene Body
Transformer Powered models on Machined In-Line PVDF Body
Models for Saddle mounting on U.S. IPS Pipe (ASTM 1785)
Models for mounting on Solvent Weld PVC TEE
Dimensions
Model A B
3
⁄8" MPT 57
⁄8" 43
⁄4" 1
⁄2" MPT 57
⁄8" 51
⁄8" 3
⁄4" MPT 6" 51
⁄4"
1" MPT 6" 55
⁄8"
11
⁄2" MPT 61
⁄2" 7"
2" MPT 63
⁄4" 7"
PVC
Tee
Machine
d In-line
Panel
Mount
Option
Saddle
Mount
Sensor
Mounted
Flowmeters and Process Controls
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 7
07_07 3/30/14 8:00 AM Page 7
F-1000 & F-2000 SERIES PIPE FITTINGS
Molded In-Line Pipe Fittings
F-1000 Paddlewheel Flowmeter with Molded In-Line Body
Machined In-Line Pipe Fittings
Saddle Mount Pipe Fittings
TEE Pipe Fittings
 POLYPROPYLENE PVDF
 Pipe Size GPM Range Max. PSI Drop Item # Price Item # Price
 3
⁄8" .8 to 8 2.3 38M1 $53.24 38F1 $143.57
 3
⁄8" .4 to 4 8.7 38M2 53.24 38F2 143.57
 1
⁄2" 2 to 20 3.5 50M1 53.24 50F1 143.57
 1
⁄2" .5 to 5 6.9 50M2 53.24 50F2 143.57
 3
⁄4" 3 to 30 1.9 75M1 53.24 75F1 143.57
 3
⁄4" .8 to 8 2.3 75M2 53.24 75F2 143.57
 1" 5 to 50 1.6 10M1 53.24 10F1 143.57
 1" 2 to 20 3.5 10M2 53.24 10F2 143.57
 11
⁄2" 4 to 40 1.8 15M1 104.40 15F1 293.86
 11
⁄2" 6 to 60 1.0 15M2 104.40 15F2 293.86
 11
⁄2" 10 to 100 0.9 15M3 104.40 15F3 293.86
 2" 4 to 40 1.8 20M1 117.46 20F1 326.26
 2" 6 to 60 1.0 20M2 117.46 20F2 326.26
 2" 10 to 100 0.9 20M3 117.46 20F3 326.26
 2" 20 to 200 1.0 20M4 117.46 20F4 326.26
 POLYPROPYLENE PVDF
 Pipe Size GPM Range Max. PSI Drop Item # Price Item # Price
 3
⁄8" .8 to 8 2.3 38P1 $91.35 38K1 $326.26
 3
⁄8" .4 to 4 8.7 38P2 91.35 38K2 326.26
 1
⁄2" 2 to 20 3.5 50P1 91.35 50K1 326.26
 1
⁄2" .5 to 5 6.9 50P2 91.35 50K2 326.26
 3
⁄4" 4 to 40 1.8 75P1 91.35 75K1 326.26
 3
⁄4" .8 to 8 2.3 75P2 91.35 75K2 326.26
 1" 6 to 60 1.0 10P1 91.35 10K1 326.26
 1" 2 to 20 3.5 10P2 91.35 10K2 326.26
 11
⁄2" 1 to 10 1.7 15P5 195.77 15K7 619.92
 11
⁄2" 6 to 60 1.0 15P3 195.77 15K3 619.92
 11
⁄2" 15 to 150 0.8 15P1 195.77 15K1 619.92
 2" 2 to 20 1.8 20P6 247.97 20K9 926.21
 2" 6 to 60 1.0 20P4 247.97 20K5 926.21
 2" 15 to 150 0.8 20P2 247.97 20K2 926.21
 2" 30 to 300 1.0 20P1 247.97 20K1 926.21
PIPE SIZES: 1", 11
⁄2", 2"
PIPE SIZES: 3
⁄8", 1
⁄2", 3
⁄4",1", 11 FEATURES ⁄2", 2" M/NPT
n One piece injection molded construction.
n Male pipe thread In-line installation.
n Polypropylene fittings for standard applications.
n PVDF material for highly corrosive applications.
PIPE SIZES: 3
⁄8", 1
⁄2", 3
⁄4",1", 11
⁄2", 2" F/NPT
Quick Spec
n Max. PSI – 300 psig (20 bar) @ 70?F (21?C)
n Max. Temp – 200?F (93?C) @ 0 PSI
Note: Temperature rating of pipe fitting only.
Actual pipe rating may vary.
Quick Spec
n Max. PSI – 300 psig (20 bar) @ 70?F (21?C)
n Max. Temp – 200?F (93?C) @ 0 PSI
Note: Temperature rating of pipe fitting only. Actual pipe rating may vary.
Quick Spec
n Max. PSI – 300 psig (20 bar) @ 70?F (21?C)
n Max. Temp – 200?F (93?C) @ 0 PSI (PVDF) 140?F (60?C) @ 0 PSI (PVC)
Note: Temperature rating of pipe fitting only. Actual pipe rating may vary.
n O-ring seals – Viton
Quick Spec
n Max. Working Pressure 300 psig (20 bar) @ 70?F (21?C)
n Max. Fluid Temperature 200?F (93?C) @ 0 PSI
n Full scale accuracy +/- 2%
n Meter body material Polysulfone
n Sensor/Paddle/Axle material PVDF
n O-ring seals Viton
n Max. pressure drop 8 psi (varies per model)
n Approximate shipping wt. 2 lb. (.91 kg)
Quick Spec
n Max. PSI
316SS TEE – 300 psig (20 bar) @ 70?F (21?C)
PVC TEE –200 psig (13.8 bar) @ 70?F (21?C)
n Max. Temp
316 SS TEE –200?F (93?C) @ 0 PSI
PVC TEE –140?F (60?C) @ 0 PSI
 316 STAINLESS STEEL TEE SOCKET WELD PVC TEE
 Pipe Size GPM Range Material Item # Price Material Item # Price
 1" 6 to 60 316 S.S. 10ST $250.88 PVC 10AT $53.24
 11
⁄2" 15 to 150 316 S.S. 15ST 267.96 PVC 15AT 53.24
 2" 30 to 300 316 S.S. 20ST 296.47 PVC 20AT 53.24
 SCHEDULE 40 SCHEDULE 80
Pipe Size IPS Range GPM Material Item # Price Item # Price
 11
⁄2" 15 to 150 PVDF 15K4 $53.24 15K8 $53.24
 2" 30 to 300 PVDF 20K4 53.24 20K8 53.24
 21
⁄2" 40 to 400 PVC 25A4 130.12 25A8 119.82
 3" 60 to 600 PVDF 30K4 53.24 30K8 53.24
 4" 100 to 1000 PVC 40A4 119.82 40A8 119.82
 6" 250 to 2500 PVC 60A4 119.82 60A8 119.82
 8" 400 to 4000 PVC 80A4 119.82 80A8 119.82
 10" 600 to 6000 PVC 100A4 133.12 100A8 133.12
 12" 800 to 8000 PVC 120A4 133.12 120A8 133.12
FEATURES
n Machined from solid bar and sheet stock.
n Union and F/NPT pipe adapter connections for
easy installation.
n Internal gland o-ring adapter seals provide
greater protection against installation
misalignment and vibration.
FEATURES
n 11
⁄2" thru 3" (50mm thru 90mm) injection molded PVDF.
IPS PIPE SIZES: 11
⁄2", 2", 21
⁄2", 3", 4", 6", 8", 10", 12"
20M3
Polypropylene
20F3 PVDF
20PI Polypropylene
75PI Polypropylene
20AT
PVC
10ST
316 SS
80A4 PVC
15K8 PVDF
Call Webb for
details.
Flowmeters and Process Controls
Starting At
$
27956
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 8
08_08 3/30/14 8:12 AM Page 8
FEATURES
n Meets Schedule 80 specifications
n Displays in Gallons, Litres, and Cubic Feet
n Indicates batch, cumulative totals and rate of flow
n Non-volatile totalizers Spigot models include a male end that allows you to glue on any PVC fitting.
TM Series - 1
⁄2"-2" Computer Display
and Digital Pulse Meters
Use TM PVC Water Meters with water or mild chemicals.
FEATURES
n Indicates batch,
cumulative totals
and rate of flow
n One-piece field
replaceable turbine
assembly
n Spigot models may be cut to length
n Meets Schedule 80 specifications
n Non-volatile totalizers
TM Series - 3"-4" Computer
Display and Digital Pulse Meters
Use TM PVC Water Meters with
water or mild chemicals.
“Look for the
blue label!”
Pulse Model
NPT Model
Spigot Model
Shown with
90° Adapter
Display
Model
TM Water Meters with Digital Pulse
Item # Size Fitting Flowrate Price
TM050P 1
⁄2" Spigot 1-10 GPM $276.39
TM050NP 1
⁄2" NPT 1-10 GPM 297.98
TM075P 3
⁄4" Spigot 2-20 GPM 304.46
TM075NP 3
⁄4" NPT 2-20 GPM 326.05
TM100P 1" Spigot 5-50 GPM 356.28
TM100NP 1" NPT 5-50 GPM 377.88
TM150P 11
⁄2" Spigot 10-100 GPM 399.46
TM150NP 11
⁄2" NPT 10-100 GPM 431.86
TM200P 2" Spigot 20-200 GPM 431.86
TM200NP 2" NPT 20-200 GPM 464.25
TM Water Meters w/Computer Display
Item # Size Fitting Flowrate Price
TM050 1
⁄2" Spigot 1-10 GPM $276.39
TM050N 1
⁄2" NPT 1-10 GPM 297.98
TM075 3
⁄4" Spigot 2-20 GPM 304.46
TM075N 3
⁄4" NPT 2-20 GPM 326.05
TM100 1" Spigot 5-50 GPM 356.28
TM100N 1" NPT 5-50 GPM 377.88
TM150 11
⁄2" Spigot 10-100 GPM 399.46
TM150N 11
⁄2" NPT 10-100 GPM 431.86
TM200 2" Spigot 20-200 GPM 431.86
TM200N 2" NPT 20-200 GPM 464.25
Flange
Union
Male NPT Coupler
TM Water Meters with Computer Display
Item # Size Fitting Flowrate Price
TM300 3" Spigot 40-400 GPM $680.18
TM400 4" Spigot 60-600 GPM 724.42
TM300F 3" 150# ANSI Flange 40-400 GPM 859.39
TM400F 4" 150# ANSI Flange 60-600 GPM 914.44
TM300N 3" NPT 40-400 GPM 859.39
TM400N 4" NPT 60-600 GPM 914.44
TM Water Meters with Pulse Output with Display
Item # Size Fitting Flowrate Price
TM300GG 3" Spigot 40-400 GPM $947.91
TM400GG 4" Spigot 60-600 GPM 992.18
TM300FGG 3" 150# ANSI Flange 40-400 GPM 1,127.14
TM400FGG 4" 150# ANSI Flange 60-600 GPM 1,182.19
TM300NGG 3" NPT 40-400 GPM 1,127.12
TM400NGG 4" NPT 60-600 GPM 1,182.19
TM Water Meters with Digital Pulse
Item # Size Fitting Flowrate Price
TM300P 3" Spigot 40-400 GPM $680.18
TM400P 4" Spigot 60-600 GPM 724.42
TM300FP 3" 150# ANSI Flange 40-400 GPM 859.39
TM400FP 4" 150# ANSI Flange 60-600 GPM 914.44
TM300NP 3" NPT 40-400 GPM 859.39
TM400NP 4" NPT 60-600 GPM 914.44
TM Water Meters with 4-20mA with Display
Item # Size Fitting Flowrate Price
TM300GX 3" Spigot 40-400 GPM $995.42
TM400GX 4" Spigot 60-600 GPM 1,039.62
TM300FGX 3" 150# ANSI Flange 40-400 GPM 1,174.63
TM400FGX 4" 150# ANSI Flange 60-600 GPM 1,229.70
TM300NGX 3" NPT 40-400 GPM 1,174.63
TM400NGX 4" NPT 60-600 GPM 1,229.70
Flange Model w/
GG Electronics
Flowmeters and Process Controls
Economy Electronic Digital Meters
 Computer Display Digital Pulse
Meter Size Fitting Type Flow Range Item # Price Item # Price
TM SERIES 1
⁄2"-2" Meters 1
⁄2" Spigot 1-10 GPM TM050 $276.39 TM050-P $276.39 1
⁄2" NPT 1-10 GPM TM050-N 297.98 TM050-N-P 297.98 3
⁄4" Spigot 2-20 GPM TM075 304.46 TM075-P 304.46 3
⁄4" NPT 2-20 GPM TM075-N 326.05 TM075-P-N 326.05
1" Spigot 5-50 GPM TM100 356.28 TM100-P 356.28
1" NPT 5-50 GPM TM100-N 377.80 TM100-N-P 377.80
11
⁄2" Spigot 10-100 GPM TM150 399.46 TM150-P 399.46
11
⁄2" NPT 10-100 GPM TM150-N 431.86 TM150-N-P 431.86
2" Spigot 20-200 GPM TM200 431.86 TM200-P 431.86
2" NPT 20-200 GPM TM200-N 464.25 TM200-N-P 464.25
TM SERIES 3"-4" Meters
3" Spigot 40-400 GPM TM300 680.18 TM300-GG 947.91
4" Spigot 60-600 GPM TM400 724.42 TM400-GG 992.18
3" 150# ANSI Flange 40-400 GPM TM300-F 859.39 TM300-F-GG 1,127.14
4" 150# ANSI Flange 60-600 GPM TM400-F 914.44 TM400-F-GG 1,182.19
3" NPT 40-400 GPM TM300-N 859.39 TM300-N-GG 1,127.12
4" NPT 60-600 GPM TM400-N 914.44 TM400-N-GG 1,182.19
TM SERIES 3"-4" Meters
3" Spigot 40-400 GPM TM300-P 680.18 TM300-GX 995.42
4" Spigot 60-600 GPM TM400-P 724.42 TM400-GX 1,029.63
3" 150# ANSI Flange 40-400 GPM TM300-F-P 859.39 TM300-F-GX 1,174.63
4" 150# ANSI Flange 60-600 GPM TM400-F-P 914.44 TM400-F-GX 1,229.70
3" NPT 40-400 GPM TM300-N-P 859.39 TM300-N-GX 1,174.63
4" NPT 60-600 GPM TM400-N-P 914.44 TM400-N-GX 1,229.70
Available in five sizes,
1
⁄2" through 2" for
flows up to 170 gpm,
these meters are
extremely rugged and
reliable.
To complement
the RCDL meter line,
Badger Meter offers a
complete line of accessories that includes totalizers,
electromechanical and electronic transmitters, rate of
flow indicators and batch/process controllers.
Recordall® Industrial Meters
NUTATING DISC METER, BRONZE AND THERMOPLASTIC
PERFORMANCE
n Accuracy: ± 1.5%
n Repeatability: ± 0.5%
n Max. Operating Pressure: 150 psi
n Maximum Operating Temperature:
Plastic housing: 100°F
Bronze housing: 120°F
Specifications
 Dimensions in Inches without Register Flow Rate in Gallons
 A B Meter Chemicals & Oils
 Meter Meter Housing Meter Centerline Length with Cold Liquids 32-250° F (BZ)
 Model Size Material Length to Base Conn. 32-120° F 32-100° F (PL) Price
 M25 5
⁄8" BZ or PL 71
⁄2" 13
⁄8" 127
⁄16" 1
⁄2 -25 gpm 1-25 gpm $199.31
 M25 3
⁄4" BZ or PL 71
⁄2" 13
⁄8" 125
⁄8" 1
⁄2 -30 gpm 1-30 gpm 208.47
 M40 1" PL 103
⁄4" 21
⁄4" 163
⁄16" 3
⁄4 -50 gpm N/A 318.02
BZ = Bronze; PL = Plastic NPT connection set assemblies available.
N/A = Not available in high temperature/chemical option.
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 9
09_09 3/30/14 8:04 AM Page 9
Output can be simple totals, rate of flow and various types of signal output.
GPI Electronics can be mounted to the meter or to a remote location and come with or without display.
Display & Output Instruments
4-20mA Transmitter
Loop powered 4-20mA output
without display. Lockout feature
prevents tampering. Remote or local mounting.
 Item # Price
 GA500 $304.05
 GA510 304.05
Display with
Pulse Output
Battery powered Rate & Total
display with an external power option – pulse output.
Flowrate in units per hour or per minute.
 Item # Units Price
 GG500M Units per Minute $471.81
 GG500H Units per Hour 471.81
 GG510M Units per Minute 471.81
 GG510H Units per Hour 471.81
GX500 and GX510
Display with
4-20mA Transmitter
Loop powered 4-20mA output with Rate & Total display.
Lockout feature prevents tampering. Flowrate in
units per hour or per minute.
 Item # Units Price
 GX500M Units per Minute $519.30
 GX500H Units per Hour 519.30
 GX510M Units per Minute 519.30
 GX510H Units per Hour 519.30
Scaled Pulse Unit
Selectable K-factor converts
input frequency to scaled pulse
output. Remote or local mounting.
 Item # Price
 SC500 $370.32
 SC510 370.32
510 Conversion Kit
This kit combines the Conduit
Adapter (113524-01) with a
sensor to allow easy installation
of the 510 Series Displays to a G2 Meter.
 Item # Price
 11344001 $269.51
GA SERIES GG SERIES
GX SERIES
SC SERIES
Aluminum Nylon
Flowmeters and Process Controls
01N Series Electronic Digital Water Meter 01A Series Electronic Digital Fuel Meter
FEATURES
n Lightweight and accurate with rugged aluminum
housing and sealed electronic circuitry.
n Factory calibrated for petroleum fuel with a
choice of gallon and litre measurement.
n Powered by two AAA batteries that are easy to replace.
n Works well on any pump or gravity feed system with at least 3-30 GPM (10-100 LPM) flow range.
 Item # Description Price
 113255-1 01A31GM Aluminum Fuel Meter $179.28
2 Totals (1 accumulative, 1 Batch), flow range 3 to 30 GPM; reads in gallons; 1" female NPT thread
 113255-2 01A31LM Aluminum Fuel Meter 179.28
2 Totals (1 accumulative, 1 Batch), flow range 10 to 100 LPM; reads in litres; 1" female NPT thread
 113255-3 01A12LM Aluminum Fuel Meter 179.28
2 Totals (1 accumulative, 1 Batch), flow range 10 to 100 LPM; reads in litres; 1" female ISO thread
 Item # Description Price
 113255-4 01N31GM Nylon Water Meter $179.28
2 Totals (1 accumulative, 1 Batch), flow range 3 to 30 GPM; reads in gallons; 1" NPT thread
 113255-5 01N31LM Nylon Water Meter 179.28
2 Totals (1 accumulative, 1 Batch), flow range 10 to 100 LPM; reads in litres; 1" NPT thread
 113255-6 01N12LM Nylon Water Meter 179.28
2 Totals (1 accumulative, 1 Batch), flow range 10 to 100 LPM; reads in litres; 1" ISO thread
A1 Commercial Grade Meters
Three sizes of Aluminum meters for petroleum products. Use the Nylon meters for water or
non-aggressive chemicals.
FEATURES
n Local Display Computer features: 2 Totals (1 Resettable,
1 Cumulative); Factory Calibration in gallons and litres; User Configuration and Rate of Flow.
n Output capabilities available to communicate with process control equipment.
FITTING SIZE
 Aluminum Low Flow 1" and 2" Nylon Low Flow 1"
“Look for the
silver label!”
Quick Spec
n Design Type: Turbine
n Accuracy: ±5.0% of reading
n Repeatability: ± .5%
n Pressure Rating: 150 PSIG
n Operating Temperature: +14°F to +131°F
(-10°C to +55°C)
Quick Spec
n Design Type: Nutating Disc with Electronic
Display
n Fitting Size: 1 inch
n Fitting Type: Inlet: NPT (Female) Outlet:
NPT (Male)
n Accuracy: ± 2.0% of reading
n Pressure Rating: 50 PSIG
n Operating Temperature: +15°F to +130°F
(-9°C to +54°C)
Quick Spec
n Design Type: Turbine
n Accuracy: ± 5.0% of reading
n Repeatability: ± .5%
n Pressure Rating: 300 PSIG
FEATURES
n Simple, small and sturdy Electronic Digital
Water Meter with rugged nylon housing.
n Mount on the end of a hose or a pipe, in-line.
n Choice of gallon and litre measurement.
n Complete meter including turbine assembly, microprocessor and LCD readout.
n Works well on any pump or gravity feed system with at least 3-30 GPM (10-100 LPM) flow range.
“Look for the red label!”
FM-300H/R Chemical Meter
FEATURES
n Simple, small and sturdy Electronic Digital Disc
Meter with rugged PBT housing.
n Mount on the end of a hose or a pipe, in-line.
n Choice of gallon and litre measurement.
n Complete meter including disc assembly, microprocessor and LCD readout.
n Factory calibrated for thin and medium fluids. Field calibrate for more viscous fluids.
 Item # Description Price
 120000-17 FM300H/R Electronic Disc Meter (Gallons) $287.19
Indicates Flowrate; 2 Totals (1 Accumulative, 1 Batch); 3 Calibrations (2 Factory,
1 Field) 2 to 20 GPM; reads in gallons; 1" NPT thread; female inlet, male outlet
 120000-15 FM300HL/R Electronic Disc Meter (Litres) 287.19
Indicates Flowrate; 2 Totals (1 Accumulative, 1 Batch); 3 Calibrations (2 Factory,
1 Field) 7 to 75 LPM; reads in litres; 1" NPT thread; female inlet, male outlet
 Item # Description Price
 A109GMA025NA1 Aluminum, F/NPT, 1" Low Flow $479.35
 A109GMA100NA1 Aluminum, 1" F/NPT, 1" Low Flow 467.47
 A109GMA200NA1 Aluminum, 2" F/NPT, 1" Low Flow 1,033.21
 A109GMN025NA1 Nylon, F/NPT, 1" Low Flow 505.26
 A109GMN100NA1 Nylon, 1" F/NPT, 1" Low Flow 494.47
Call Webb for Other Options
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 10
10_10 3/30/14 8:16 AM Page 10
Flowmeters and Process Controls
 Item # Description Price
 G2P05N09GMA 1
⁄2" PVDF, (2 Totals, 2 Calibrations, Rate) $816.48
 G2P10N09GMA 1" PVDF, (2 Totals, 2 Calibrations, Rate) 818.69
 G2P05N51GMA 1
⁄2" PVDF, (GG500 Standard Remote Sensor Option) 1,246.23
 G2P10N51GMA 1" PVDF, (GG500 Standard Remote Sensor Option), 1,248.44
 G2P05N61GMA 1
⁄2" PVDF, (GX500 4-20mA Transmitter w/Display) 1,294.85
 G2P10N61GMA 1" PVDF, (GX500 4-20mA Transmitter w/Display) 1,297.06
 G2P05N71GMA 1
⁄2" PVDF, (GA500 4-20mA Transmitter Standard Remote Sensor) 1,072.78
 G2P10N71GMA 1" PVDF, (GA500 4-20mA Transmitter Standard Remote Sensor) 1,074.99
 G2P05NXX 1
⁄2" PVDF, (No Electronics Turbine Only) 499.39
 G2P10NXX 1" PVDF, (No Electronics Turbine Only) 501.60
 Item # Description Price
 G2A05N09GMA 1
⁄2" Aluminum, (2 Totals, 2 Calibrations, Rate) $630.30
 G2A07N09GMA 3
⁄4" Aluminum, (2 Totals, 2 Calibrations, Rate) 642.20
 G2A10N09GMA 1" Aluminum, (2 Totals, 2 Calibrations, Rate) 650.10
 G2A15N09GMA 11
⁄2" Aluminum, (2 Totals, 2 Calibrations, Rate) 903.10
 G2A20N09GMA 2" Aluminum, (2 Totals, 2 Calibrations, Rate) 1,131.90
Call Webb for Other Options
G2 Industrial Meters PVDF
Use PVDF Meters with harsh chemicals: Bleach, Ferric
Chloride, Phenol, Sulfuric Acid or Phosphoric Acid.
FEATURES
n 2 Totals (Batch = Resettable, Cumulative = Non-Resettable); Rate of Flow. Factory calibrated in
gallons and litres. Field calibratable. Allows user calibration. Includes non-volatile totals.
n One field replaceable internal part making maintenance easy.
n Precision accuracy in a lightweight and durable meter.
n Available with Local Display or Remote Transmitter.
n Accessories easily upgrade meter.
n Lithium battery life: 5 years.
G2 Industrial Meters Aluminum
Aluminum meters are best suited for
petroleum based products.
FEATURES
n Modular design allows for use with Output
Modules, Sensors and Remote Transmitters.
n High pressure, durable and compact turbine flowmeters.
n 2 Totals (Batch = Resettable, Cumulative = Non-Resettable); Rate of Flow. Factory calibrated in
gallons and litres. Field calibratable. Allows user calibration. Includes non-volatile totals.
n Internal parts are simple to replace for easy maintenance.
n Lightweight, compact design allows for easy installation.
n Lithium battery life: 5 years. Quick Spec
n Fitting Type: NPT or ISO (Female)
n Housing Material: PVDF
n Accuracy (% of Reading):
1
⁄2" (P05) Turbine Only ± 2.0%
1
⁄2" (P05) w/Computer ± 1.5%
1" (P10) Turbine Only ± 1.5%
1" (P10) w/Computer ± 1.0%
n Repeatability: ± 0.3%
n Flow Range:
1
⁄2" (P05) 1.2 - 12 GPM
1" (P10) 5 - 50 GPM
n Pressure Rating: 150 PSI / 10.2 BAR
n Operating
Temperature Range: -20°F to +180°F
with Computer: 0°F to +140°F
Quick Spec
n Fitting Type: NPT or ISO (Female)
n Flow Range:
1
⁄2" (A05) 1 - 10 GPM
3
⁄4" (A07) 2 - 20 GPM
1" (A10) 5 - 50 GPM
11
⁄2" (A15) 10 - 100 GPM
2" (A20) 20 - 200 GPM
n Housing Material: Aluminum
n Repeatability: ± 0.1%
n Pressure Rating: 300 PSI / 21 BAR
n Operating
Temperature Range: -40°F to +250°F
with Computer: 0°F to +140°F
“Look for the
blue label!”
Series G2, F/NPT, Gal/Min, Turbine / Mount Series G2, F/NPT, Gal/Min, Turbine / Mount
G2 Industrial Meters Stainless Steel
FEATURES
n Stainless steel meters have excellent
chemical compatibility.
n Modular design allows for use with Output
Modules, Sensors and Remote Transmitters.
n High accuracy meter.
n Internal parts are simple to replace for easy maintenance.
n 2 Totals (Batch = Resettable, Cumulative = Non-Resettable); Rate of Flow. Factory calibrated in
gallons and litres. Field calibratable. Allows user calibration. Includes non-volatile totals.
n Lithium battery life: 5 years.
n Accessories easily upgrade meter.
G2 Industrial Meters High Pressure
The turbine meter of choice for high pressure applications
like spray washers and hydraulic systems.
GPI Stainless Steel Meters are rugged and dependable. Use stainless steel meters for most
chemicals: Ammonium, Plating Solutions and Fuel products.
FEATURES
n Excellent chemical compatibility.
n Modular design allows for use with Output
Modules, Sensors and Remote Transmitters.
n Lithium battery life: 5 years.
n Internal parts are simple to replace for easy maintenance.
n 2 Totals (Batch = Resettable, Cumulative = Non-Resettable); Rate of Flow. Factory calibrated in
gallons and litres. Field calibratable. Allows user calibration. Includes non-volatile totals.
 Item # Description Price
 G2S05N09GMA 1
⁄2" Stainless Steel, (2 Totals, 2 Calibrations, Rate) $741.40
 G2S07N09GMA 3
⁄4" Stainless Steel, (2 Totals, 2 Calibrations, Rate) 753.50
 G2S10N09GMA 1" Stainless Steel, (2 Totals, 2 Calibrations, Rate) 766.70
 G2S15N09GMA 11
⁄2" Stainless Steel, (2 Totals, 2 Calibrations, Rate) 1,071.40
 G2S20N09GMA 2" Stainless Steel, (2 Totals, 2 Calibrations, Rate) 1,397.00
Call Webb for Other Options
Quick Spec
n Fitting Type: NPT or ISO (Female)
n Flow Range:
1
⁄2" (S05) 1 - 10 GPM
3
⁄4" (S07) 2 - 20 GPM
1" (S10) 5 - 50 GPM
11
⁄2" (S15) 10 - 100 GPM
2" (S20) 20 - 200 GPM
n Housing Material: 316 Stainless Steel
n Repeatability: ± 0.1%
n Pressure Rating: 1,500 PSI / 102 BAR
n Operating
Temperature Range: -40°F to +250°F
with Computer: 0°F to +140°F
Quick Spec
n Fitting Type: NPT or ISO (Female)
n Flow Range:
1
⁄2" (H05) 1 - 10 GPM
3
⁄4" (H07) 2 - 20 GPM
1" (H10) 5 - 50 GPM
11
⁄2" (H15) 10 - 100 GPM
2" (H20) 20 - 200 GPM
n Housing Material: 316 Stainless Steel
n Repeatability: ± 0.1%
n Pressure Rating: 3,000 PSI / 207 BAR
n Operating
Temperature Range: -40°F to +250°F
with Computer: 0°F to +140°F
Series G2, F/NPT, Gal/Min, Turbine / Mount
 Item # Description Price
 G2H05N09GMA 1/2" SS High Pressure, (2 Totals, 2 Calibrations, Rate) $808.50
 G2H07N09GMA 3/4" SS High Pressure, (2 Totals, 2 Calibrations, Rate) 820.60
 G2H10N09GMA 1" SS High Pressure, (2 Totals, 2 Calibrations, Rate) 831.62
 G2H15N09GMA 1-1/2" SS High Pressure, (2 Totals, 2 Calibrations, Rate) 1,174.80
 G2H20N09GMA 2" SS High Pressure, (2 Totals, 2 Calibrations, Rate) 1,549.90
Call Webb for Other Options
Series G2, F/NPT, Gal/Min, Turbine / Mount
“Look for the blue label!”
“Look for the blue label!”
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 11
11_11 3/30/14 8:07 AM Page 11
Flowmeters and Process Controls
Series FS Non-Adjustable Flow Switch
CONTINUOUS MONITORING FLOW RATES, NO WETTED METALS
FEATURES
n Customizable design.
n Extremely Wide Operating Range:
.7 - 25 GPM
n Maximum flow may be
five times normal flow.
n Accuracy ±10% with ±5% repeatability.
n Nema 4 design.
n Switches 5 VDC to 240 VAC.
n Provides dry circuit interface with
computer and PLC modules.
Ordering Information
Pipe Size GPM Body Blade GPM On GPM Off
 Low SB 3/4 3 0.9 0.8
 0.75 Med SB 3/4 4S 2.0 1.0
 High SB 3/4 6S 4.0 3.0
 Low SB 3/4 3 1.0 0.8
 1 Med SB 3/4 4S 3.0 2.0
 High SB 3/4 6S 6.0 5.0
 Low LB 3/4 4L 3.0 2.5
 1.5 Med LB 1/2 4S 13.0 12.0
 High LB 1/2 6S 19.0 17.0
 Low LB 3/4 4L 4.5 4.0
 2 Med LB 1/2 4S 20.0 18.0
 High LB 1/2 6S 25.0 20.0
* The number = the mil thickness of the blade and letter is
S = short, L = long. For example, 4S is a 4 mil short blade.
On/Off is estimated in schedule 80 reducing tee.
Series FSA Adjustable Flow Switch
CONTINUOUS MONITORING FLOW RATES, NO WETTED METALS
FEATURES
n 8 to 1900+ GPM for 1" to 10" piping
n Wetted surfaces of PVC and EPDM
Elastomeric Standard
n SPDT 15 amp switching capacity model or
Dry Computer/PLC Interface model
n Maximum flow range flexibility is provided
by three adjustment options
n Continuous adjustment while operating via
FORCE/BALANCE spring
n Accuracy ±10% with ±5% repeatability
n Nema 4 or 6 design
Ideal for confirming operation of pressure relief, regulating or actuated valves
Flow Limit Between Which Switch Point May Be Set
 Pipe Arm Length Pipe Arm Length
 Size GPM Disc Diameter Size GPM Disc Diameter
 1" 8 - 13 AB 4" 75 - 155 CC
 18 - 28 AA 155 - 310 CA
 1.5" 15 - 30 BC 5" 120 - 245 CC
 25 - 50 BA 245 - 245 CA
 2" 25 - 50 BC 6" 180 - 350 CC
 50 - 105 BA 350 - 700 CA
 2.5" 35 - 80 BC *8" 300 - 600
 80 - 155 BA 600 - 1200
 3" 50 - 90 CC *10" 500 - 950
 90 - 180 C 950 - 1900
* SPECIAL ORDER: CONSULT FACTORY
 4"

 5"

 6

 8"*
 10"*
Webb Price
$
24900
Webb Price
$
34000
Ordering Information
NEW
NEW
Flomec medium capacity chemical flowmeters provide precise
volumetric flow measurement of a broad range of clean water
based products and aggressive chemicals and is also suitable
for most fuels, fuel oils and lubricating liquids. Applications
include batching, dosing or packaging of various corrosive
chemicals or as a more economical alternative to a complete
316 stainless steel meter for liquids.
FEATURES / BENEFITS
n High accuracy & repeatability, direct reading flowmeter
n No requirement for flow conditioning ( straight pipe runs )
n Measures high & low viscosity liquids
n Quadrature pulse output option & bi-directional flow
n Integral 4-20mA output option
n Optional NMI Pattern Approval (Australia Only)
CE
MODEL CODING - FLOMEC PPS PULSE METER
Medium Capacity Chemical
Flowmeter – Model OM025 NEW
Starts At
$
89873
12 Call a Webb Specialist for other water meter products and options.
METER SELECTION
n PPS meters are used for nonaromatic/non-halogenated
chemicals,
water based liquids, Diesel Exhaust Fluid
and petroleum products including oils and
grease, fuels and fuel oils.
n PPS meters with standard ceramic rotor
pins are suitable for applications where
stainless steel is not suited or permitted.
n Blind pulse meters are available with Reed
Switch & Hall Effect outputs. Quadrature
pulse & Integral 4-20mA outputs are optional.
12_12 3/30/14 8:27 AM Page 12
515 Rotor-X Polypropylene Flow Sensor
Flowmeters and Process Controls
Webb can help you build a Signet System… as easy as 1, 2, 3!
1) Select a Controller, Monitor or Transmitter 2) Choose a Signet Sensor 3) And… complete the Connection!
Flow
Installation Fittings
Metal Fittings Submersible
Monitor Transmitter Controller pH Conductivity
Plastic Fittings
 Item # Housing Material Shaft Material Pipe Size(in.) Price
 P51530-P0 Polypro py lene Ti ta ni um 0.5 to 4 $315.70
 P51530-P1 Polypro py lene Ti ta ni um 5 to 8 327.41
 P51530-P2 Polypro py lene Ti ta ni um 10-up 354.39
515 PVDF Flow Sensor
 P51530-V0 PVDF Hastelloy C 0.5 to 4 561.25
 P51530-V1 PVDF Hastelloy C 5 to 8 582.27
 P51530-T0 PVDF PVDF 0.5 to 4 536.97
 P51530-T1 PVDF PVDF 5 to 8 584.64
5090 Sensor Powered Flow Monitor
The most economical flow monitor in the Signet product line is also one of the most
feature-packed. The 5090 Sensor Powered Flow Monitor is designed exclusively for use with
the Signet 515 Rotor-X Flow Sensor* to provide a completely independent flow monitoring system.
No other indicator or rotameter provides the application versatility and the unique Signet
features of the 5090.
 Part No. Description Price
 3-5090 Assorted flow unit/multiplier dial face decals included $351.67
 Reversible dial face kit includes (0-2, 4, 6, 8, 10 and 100)
RECOMMENDED SCALE
RANGES (GPM)
Recommended full scale calibration
ranges for individual pipe
size installations are shown.
Average flow rate should be
approximately 50% of the scale.
*For use with +GF+ SIGNET 5090 and 515
 Pipe Size (in.) Minimum Maximum
 0.5 0 - 8 0 - 2 x 10
 0.75 0 - 2 x 10 0 - 4 x 10
 1 0 - 4 x 10 0 - 8 x 10
 1.25 0 - 6 x 10 0 - 100
 1.5 0 - 6 x 10 0 - 2 x 100
 2 0 - 100 0 - 2 x 100
 2.5 0 - 2 x 100 0 - 4 x 100
 3 0 - 4 x 100 0 - 6 x 100
 4 0 - 4 x 100 0 - 100 x 10
 5 0 - 6 x 100 0 - 100 x 10
 6 0 - 8 x 100 0 - 2 x 1000
 8 0 - 2 x 1000 0 - 4 x 1000
 10 0 - 2 x 1000 0 - 6 x 1000
 12 0 - 4 x 1000 0 - 8 x 1000
Quick Spec
n Accuracy: ±2% of full scale
n Repeatability: ±1% of full scale
n Operating temperature: 14°F to 149°F
n Dials: Reversible dial kit included
(0-2, 4, 6, 8, 10, 100)
COMPATIBLE SENSORS
The 8150 Battery Powered Flow Totalizer is compatible
with the following Signet Flow Sensors: 515 and 525.
 Item # Description Price
3-8150-1 Field Mount $515.05
3-8150-1P Panel Mount 515.05
3-8150-P0 Field Mount, mount kit, 3-8510-P0 503.20
3-8150-P1 Field Mount, mount kit, 3-8510-P1 811.96
3-8150-T0 Field Mount, mount kit, 3-8510-T0 1,082.33
3-8150-V0 Field Mount, mount kit, 3-8510-V0 1,036.41
8150 Battery Powered Flow Transmitters
Quick Spec
n Three totalizers
n Long-lasting lithium batteries
n Mounting versatility
n No-flow indicator
n Large digital display with averaging
n Simple push-button operation
n User selectable access code prevents
unwanted changes
n Auto-calibration
ORDERING INFORMATION
Field, Panel or Integral Sensor mount – choose one:
-1 Field mount for pipe, tank and wall mounting
-1P Panel mount; includes mounting bracket and panel gasket
-P0* 3-8150-1 integrally mounted on Model 515 Paddlewheel (Part No. 3-8510-P0) for 0.5 to 4 in. pipes,
with a polypropylene body, Black PVDF rotor and Titanium pin
-P1* 3-8150-1 integrally mounted on Model 515 Paddlewheel (Part No. 3-8510-P1) for 5 to 8 in. pipes,
with a polypropylene body, Black PVDF rotor and Titanium pin
-T0* 3-8150-1 integrally mounted on Model 515 Paddlewheel (Part No. 3-8510-T0) for 0.5 to 4 in. pipes,
with a natural PVDF body, rotor and pin
-V0* 3-8150-1 integrally mounted on Model 515 Paddlewheel (Part No. 3-8510-V0) for 0.5 to 4 in. pipes,
with a natural PVDF body, rotor and Hastelloy pin
Notes:1) For panel version, cutout must be 92 x 92 mm (3.62 x 3.62 in.).
2) To mount the panel version on a wall, use the heavy duty wall mount bracket.
3) Use the Universal mounting kit with the Field mount instrument to mount to a pipe, tank or wall.
4) An optional splash proof rear cover can be ordered separately if needed.
* Contact sales office to request additional sensor information.
8150 Battery Powered Flow Totalizer
The Signet 8150 Battery Operated Flow Totalizer is compatible with the Signet 515, 525 and
2517 flow sensors, and will provide years of dependable operation. One of the three totalizers
is resettable from the front panel or a remote location, while the second resettable totalizer can
only be reset by entering a user-selectable security code. Meanwhile, the third is a permanent
non-resettable totalizer. Our intuitive software design and four-button keypad provide for simple
operation while setting screen displays and programming the system. A display averaging feature
is included for applications where the flow in the pipe fluctuates, for applications where flow
stops and starts due to production needs, a no-flow indicator will display the hours of non-flow.
3 Totalizers; 2 Resettable and 1 Permanent; user selects which one to be displayed
Panel Mount Pipe, Wall and Tank Mount Integral Mount
Quick Spec
n Flow Rate Range: 1 to 20 ft/s
n Linearity: ± 1% of full range
n Repeatability: ±0.5% of full range
n PP 180 psi @ 68°F, 25 psi @ 185°F
n PVDF 200 psi @ 68°F,
25 psi @ 185°F
Available in Polypro and PVDF for chemical resistance and high purity applications.
COMPATIBILITY
5090, 8150, 9900-1BC Flow Monitors, 5600 Batch Controller, 8550 Flow
Transmitter, 8900 & 9900 Multi-Parameter Controller
From Only
$
51505 From Only
$
51505
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 13
13_13 3/30/14 8:29 AM Page 13
Flowmeters and Process Controls
Webb tech tip
2536 Low Flow Sensor 2540 High Performance Flow Sen sor
The Signet 2540 offers the added strength and corrosion resistance of stainless
steel for applications with low velocity measurements. Unique internal
circuitry eliminates the need for magnets in the process fluid, enabling lower
flow measurement while maintaining the advantages of insertion sensor
design. The 2540’s unique rotor/bearing design offers low flow measuring
capability with increased reliability. Pipe size range: 1.5in. to 24in. Consult
Sales Office for applications above 24in.
The Signet 2536 Low Flow Sensor is a high resolution, low power device
ideal for measuring flow in piping systems with extremely low velocities.
It incorporates a state-of-the-art, advanced Hall Effect design allowing
it to operate with a wide range of voltages and current supplies.
COMPATIBILITY
8550 Flow Transmitter, 8900 Multi-Parameter Controller Item # Description Price
2540 Adjustable 316SS Flow Sensor
 3-2540-1 High Performance Flow Sensor with 1.5 in. NPT thread $498.46
 3-2540-2 High Performance Flow Sensor with 1.5 in. ISO thread 498.46
 12240021 Optional EPR Seal (Max. Temp.: 212°F/100°C) 7.48
 3-2540-3 Hot Tap w/1.5" NPT 696.19
 3-2540-4 Hot Tap w/1.5" ISO 696.19
 31500.663 Hot Tap Insertion Tool 405.42
 Item # Description Price
 3-2536-P0 PP body, Titanium shaft, 0.5" to 4.0" $342.40
 3-2536-P1 PP body, Titanium shaft, 5.0" to 8.0" 362.22
 3-2536-P2 PP body, Titanium shaft, 10.0" & up 380.25
 3-2536-T0 PVDF body, PVDF shaft, 0.5" to 4.0" 609.11
 3-2536-V0 PVDF body, Hastelloy C shaft, 0.5" to 4.0" 582.98
 3-2536-V1 PVDF body, Hastelloy C shaft, 5.0" to 8.0" 636.14
Installation
For maximum linearity and accuracy, the sensor
should be located in a straight run of pipe
upstream and downstream of the sensor.
Major obstructions such as pumps or throttled
valves will require longer straight runs.
Quick Spec
Operating Range:
n 0.3 to 20fps
n PP sensor housing: 180 psi @ 68°F,
25 psi 185°F
n PVDF sensor housing: 200 psi @ 68°F,
25 psi @ 185°F
n O-rings: Viton®
Power Requirements: 3.3 to 24VDC,
< 1.5mA @ 3.3V to 6VDC,
<20mA @ 6V to 24VDC
Pipe Size Range: 0.5 to 24 in.
Repeatability: ±0.5% of full scale
n Cable length: 25 ft. (1,000 ft. max.)
Quality Standards: CE
Quick Spec
n Rugged 316 stainless steel or
brass construction
n Flow rates as low as 0.3 ft/s
n No magnets in process fluid
n Removal without shutdown with
Hot-Tap version
Quick Spec
n Operating range of 0.38 to 38 lpm
n Non-magnetic turbine
n Union ends for various connector types
n End connector kits for rigid or flexible
tubing or DN15 (½ in.) pipe
n PVDF & ceramic wetted parts provide
superior chemical compatibility
n For use with both clear and opaque fluids
n 4.6 m (15 ft) cable
COMPATIBILITY
9900-1BC Flow Monitor, 5600 Batch Controller,
8550 Flow Transmitter, 8900 & 9900 Multi-Parameter Controller
Larger
Pipe Sizes!
Larger
Pipe Sizes!
Item # Description Price
3-2100-1L Turbine Sensor PVDF body & rotor FPM O-ring .10 to 1gpm $226.16
3-2100-2L Turbine Sensor PVDF body & rotor EPDM O-ring .10 to 1gpm 226.16
3-2100-1H Turbine Sensor PVDF body & rotor FPM O-ring .8 to 10gpm 226.16
3-2100-2H Turbine Sensor PVDF body & rotor EPDM O-ring .8 to 10gpm 226.16
Choice of End Connector Fitting
3-2100-31 Hose Barb Kit 1
⁄2" 26.75
3-2100-32 Hose Barb Kit 3
⁄8" 26.75
3-2100-33 Hose Barb Kit 1
⁄4" 26.75
3-2100-35 PVDF/IR Butt Fusion Kit 1
⁄2" 26.75
3-2100-37 PVC S80 Soc. Kit 10.25
3-2100-38 PVC NPT Soc Kit 10.25
Note: to install this sensor, end fittings must be installed on both ends of the sensor.
Specifically for small pipe diameter applications, the turbine flow sensor provides accurate
readings in two flow ranges: (0.1 to 1 gpm and 0.8 to 10 gpm).
The injection-molded PVDF body and ceramic bearings provide excellent chemical compatibility
and long service in dosing and batching applications. Union piping and tubing connections
along with removable NEMA 4X electronics allow for easy assembly and field replaceability.
The 2100 can be used with DN8 (¼ in.), DN10 (3/8 in.), DN15 (½ in.) tubing, or DN15 (½
in.) piping for simple installation. End connections are available in PVDF for hose barbs, fusion
socket or IR/butt fusion, and in PVC for socket or NPT thread.
Signet 2100 Turbine Flow Sensor
Item # Description Price
PF220A Portable Ultrasonic Flowmeter 1
⁄2" to 41
⁄2"od Call
PF220B Portable Ultrasonic Flowmeter 41
⁄2" to 39" Call
PF330A+B Portable Ultrasonic Flowmeter 1
⁄2" to 78" Call
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 14
The Portaflow range brings simplicity to the non-invasive
measurement of liquid flow. Portaflow offers the
user quick and accurate flow measurement with its easy
to follow menu and simple set up. Compact, rugged and
reliable, the Portaflow range has been designed to provide
sustained performance in industrial environments.
PORTAFLOW 220/300 Portable Ultrasonic Flowmeter
NEW
14_14 3/30/14 8:33 AM Page 14
Panel Mount 3-8550XP
Panel mount transmitters fit
into a standard 1/4 DIN panel
cutout.
Integral Mount 3-8051
Kit Integral adapter for
mounting the transmitter and
sensor directly in a pipe.
Universal Mount 3-8550X
Transmitter For mounting the
transmitter on a pipe, wall, or
other stationary surface.
Panel Mount 3-8750XP
Panel mount transmitters fit
into a standard 1/4 DIN panel
cutout.
Universal Mount 3-8750X
Transmitter For mounting the
transmitter on a pipe, wall, or
other stationary surface.
Signet 8350 Temperature Transmitter
Transmitters are available in a
panel mount or a field version.
The field version is mounted to the sensor
using the integral mount kit (3-8051) or
you may select the universal mount kit
(3-8050) to mount the transmitter on a
surface near the sensor.
Flowmeters and Process Controls
 Item # Description Price
 3-2760-1 Pre-amplifier, NPT $216.01
 3-2724-10 Flat pH, HF Resist, 3K, NPT 248.31
 3-2726-HF10 Bulb pH, HF Resist, 3K, NPT 304.63
 3-2725-60 Flat ORP, NPT 268.61
 3-2726-10 Bulb pH, 3K, NPT 268.61
 3-2726-LC10 Bulb pH, Low Cond, 3K, NPT 248.31
 P31542 Sensor Cap 12.95
 Item # Description Price
 3-8350-3 Temp. Field Transmitter ( 2) 4-20mA Outputs & (2) Open Collector $775.84
 3-8350-3P Temp. Panel Transmitter ( 2) 4-20mA Outputs & (2) Open Collector 775.84
See Temperature Sensors On Page 23.
 Item # Description Price
 3-8450-3 Press. Field Transmitter ( 2) 4-20mA Outputs & (2) Open Collector $775.84
 3-8450-3P Press. Panel Transmitter ( 2) 4-20mA Outputs & (2) Open Collector 775.84
See Temperature Sensors On Page 23.
 Mounting Sensor 4 to 20 mA
 Item # Version Input Output Open Collector/Relay Price
 3-8550-3 Field 2 2* 2 O.C.'s Hi, Lo, Pulse, Freq or Off $721.84
 3-8550-3P Panel 2 2* 2 O.C.'s Hi, Lo, Pulse, Freq or Off 721.85
 3-8050 Universal mounting kit 53.03
 3-8050.395 Transmitter NEMA 4X cover 46.16
 3-8051 Flow Integral Mnt NPT 53.03
* Sensor 1, Sensor 2 or delta Flow
Signet 8550 instruments convert the signal from frequency
And digital (S3L) flow sensors into a 4 to 20 mA
signal for long distance transmission. Configuration flexibility
is maximized with dual input/output, two standard
open collector outputs, two packaging options for integral/pipe
mount or panel installation, and scalability for
virtually any flow range.
Quick Spec Field Mount
n Two channel flow input/output
n 2 or 4 wire power
n Available with dual input & output
n 4 to 20 mA scaleable outputs
n Permanent & resettable totalizers
n NEMA 4X enclosure with self-healing window
n Output simulation for complete system
testing
Quick Spec
n Digital (S3L) input for stable reading
n Dual sensor input
n Pressure can be displayed in psi, bar or kPa
n Field scaleable dual 4 to 20 mA output
n NEMA 4X/IP65
 Mounting Wire Sensor 4 to 20 mA
 Item # Version Power Input Output Open Collector/Relay Price
 3-8750-3 Field 4 1 2* 2 O.C.'s Hi, Lo, Pulse or Off $789.24
 3-8750-3P Panel 4 1 2* 2 O.C.'s Hi, Lo, Pulse or Off 789.24
 3-8050 Universal mounting kit 53.03
 3-8050.395 Transmitter NEMA 4X cover 46.16
* pH, Temp or ORP
Quick Spec
Accuracy: ±0.03 pH, ±2 mV's ORP
Sensor input range:
n pH: 0.00 to 14.00 pH
n Temp. 3K Balco, (-13 to 248?F)
n ORP: -1000 to +2000 mV, isolated
(10K I.D. resistance T+, T-)
Current output:
n 4 to 20 mA, isolated, fully adjustable
and reversible
n Power: 12 to 24 VDC ±5%, regulated
n Accuracy: ±0.03 mA @ 25?C, 24 V
Relay output:
Open-collector output: Hi, Lo, Pulse, Off
n Open-collector, optically isolated, 50 mA
max, sink, 30 VDC max. pull-up voltage
The 8350 Transmitter offers local or remote display with current and relay outputs.
Configurations include open collector outputs or
mechanical relays with status indicators for process
control or alarming. Unit also has the ability to accept
other temperature sensors which have 4 to 20 mA
output via the Signet 8058 Signal Converter. Dual
input version allows difference calculation (DT)
Signet 8550 Flow Trans mit ter
Signet 8450 Pressure Transmitter
Panel Mount
Signet 8750 pH/ORP Trans mit ter
 Item # Description Price
 3-8510-P0 Integral Flow Sensor, PP Body, Ti shaft, 0.5"-4.0" $240.93
 3-8510-P1 Integral Flow Sensor, PP Body, Ti shaft, 5.0"-8.0" 272.31
 3-8510-T0 Integral Flow Sensor, PVDF Body, PVDF shaft, 0.5"-4.0" 486.47
 3-8510-V0 Integral Flow Sensor, PVDF Body, PVDF shaft, 0.5"-4.0" 480.01
 3-8512-P0 Integral Low Flow Sensor, PP Body, Ti shaft, 0.5"-4.0" 244.61
 3-8512-P1 Integral Low Flow Sensor, PP Body, Ti shaft, 5.0"-8.0" 272.31
 3-8512-T0 Integral Low Flow Sensor, PVDF Body, PVDF shaft, 0.5"-4.0" 505.85
 3-8512-V0 Integral Low Flow Sensor, PVDF Body, HastC shaft, 5.0"-4.0" 461.55
Family of ProcessPro® Transmitters
The 8450 Pressure Transmitter offers local or remote display
with current and relay outputs. Available in field and panel
mount configurations, dual channel input and is equipped
with two 4 to 20 mA outputs, fully scaleable and reversible
for each input channel. Dual open collector outputs. The unit
also has the ability to accept other sensors with 4 to 20 mA
output, via the Signet 8058 Signal Converter.
NEW NEW
Quick Spec
n Digital (S3L) input for stable & reliable
reading
n Dual sensor input
n Field scaleable dual 4 to 20 mA output
n Displays temperature and mA output
n Temperature display in (°C) or (°F)
n Dual open collector output
n NEMA 4X/IP65
The Signet 8750 pH/ORP Transmitter is designed for
broad application and ease of setup and use. The unit
auto-configures for either pH or ORP use when connected
to Signet pH or ORP sensors. Multiple mounting
options allow for installation best suited to your particular
application. The automated “Easy-cal” menu features
automatic buffer recognition for mistake proof pH or ORP
sensor calibrations. Two-line LCD provides sensor diagnostic
information for ease in system maintenance.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 15
15_15 3/30/14 8:49 AM Page 15
Flowmeters and Process Controls
 Pipe Fitting Maximum Maximum
 Item # Size (in.)/Style Temperature Pressure Price
 P5251 0.5 to 1 mini-tap 300°F 1500 psi $472.61
 P5252 1.25 to 12 mini-tap 300°F 1500 psi 472.61
 P5253 2 to 12 saddle 150°F 300 psi 472.61
The SIGNET 525 Metalex Flow Sensor offers the added
strength of an all metal sensor for high temperature
and pressure applications.
Quick Spec
n Flow rate range: 1.6 to 20 ft/s
n Rotor: CD4MCu stainless steel
n Sensor body: 316 stainless steel
n Rotor Shaft: 316 Stainless Steel or
Tungsten Carbide optional
n Pressure: 1500 psi @ safety level of 1.5
n Temperature: 300°F with mini-tap
n Linearity: ± 1% of range
n Handles pressures to 1500 psi
n Operates in temperatures to 300°F
n FM approved for hazardous areas
n CSA approved
525 Metalex Flow Sensor
Installation Accessories
Call for Special Pricing on All SIGNET Parts and Accessories
Rotor-X Accessories (for models 515, 2536, 2540, 8510 & 8512 sensors)
 Item # Description Price
 12200021 Sensor Housing O-Ring – Viton (standard) $3.69
 12240021 Sensor Housing O-Ring – EPR 7.40
 12280021 Sensor Housing O-Ring – Kalrez 149.77
 305153221 Replacement Rotor – Sleeve Bearing 59.20
 325363202 Pin & rotor kit (natural PVDF)
 for 2535/2536/8512-XX 58.25
 325363201 Replacement Rotor – PVDF (standard – Black)
 for 2535/2536/8512-XX 53.63
 32540320 Rotor Kit – 2540 62.87
 55230222 Cable, 2 conductor, shielded (price is per foot) 2.77
 M15382 Replacement Rotor – PVDF (standard – Black) 43.45
 M15384 Replacement Rotor – Tefzel 50.86
 M15461 Replacement Pin – Titanium 20.35
 M15462 Replacement Pin – Hastelloy C 55.47
 M15463 Replacement Pin – Tantalum 113.72
 M15464 Replacement Pin – Stainless Steel 50.86
 P315150V200 Pipe Adapter Insert PVDF 0.5" - 4.0"
 (inline 2700 & 2800 series sensors) 73.97
 P315201V Pipe Adapter Insert PVDF 5.0" - 8.0" 132.22
 P315202P Pipe Adapter Insert PVC 10.0" & up 279.21
 P31536 Polypro Plug (standard) 50.86
 P31934 Conduit Cap 12.03
 P51545 Replacement Pin – Ceramic 113.72
 P515473 Replacement Rotor – PVDF (natural)
 (Replaced M1538-3) 35.13
 P52504-1 Shaft, 316SS 19.40
 P52504-2 Shaft, Tungsten 50.86
Instrument Spare Parts
 Item # Description Price
 35000395 Rear Cover Kit (ProPoint & Intelek-Pro series – NEMA 4X) $43.45
 39000392 Liquid Tight Connector Kit
 (ProPoint & Intelek-Pro series) 47.15
 74000010 Battery, 5100 38.84
 P31542 Sensor cap pH/ORP (Red) 12.03
 P51589 Sensor Conduit Adapter Kit 48.12
 Power Supply – See page 22 for complete selection
 Item # Price Item # Price Item # Price
 3-2537-1C-P0 $449.74 3-2537-1C-P1 $470.47 3-2537-1C-T0 $535.37
 3-2537-2C-P0 449.74 3-2537-2C-P1 470.47 3-2537-2C-T0 535.37
 3-2537-5C-P0 470.47 3-2537-5C-P1 493.01 3-2537-5C-T0 562.41
 3-2537-6C-P0 493.01 3-2537-6C-P1 513.74 3-2537-6C-T0 588.54
Quick Spec
GENERAL
Input Frequency Range: 1 Hz to 1000 Hz
Operating Range: 0.1 m/s to 6 m/s (0.3 ft/s
to 20 ft/s)
Linearity: ±1% of max. range @ 25°C (77°F)
Repeatability: ±0.5% of max. range @ 25°C
(77°F)
Operating Range: 0.3 to 20 ft/s
ELECTRICAL
Pulse, Flow Switch
n With dry-contact relay: 24 VDC nominal
(21.6 VDC min. to 26.4 VDC max.) 30
mA max current
n With solid-state relay: 5 to 24 VDC nominal
(5.0 VDC min to 26.4 VDC max.) 30
mA max current
n Digital (S3
L): 5 VDC nominal (5.0 VDC
min to 6.5 VDC max.) 3 mA max current
n 4 to 20 mA: 12 VDC to 32 VDC nominal
(10.8 VDC min to 35.2 VDC max.) 21 mA
max current
Pulse Divider/Total Pulse Output
n Pulse Divider Setting: 1.0000 to 99999
n Relay Modes: Low, High
n Time Delay: 0.0 to 6400.0 seconds
n Hysteresis: Adjustable in Engineering Units
Relay Specifications
n Mechanical SPDT: 5A @ 30 VDC, 5A @ 250VAC
n Solid-State Relay: 100mA @ 40VDC, 70
mA @ 33 VAC
MAX. TEMPERATURE/PRESSURE
RATING
n Storage Temperature: -10°C to 75°C
(14°F to 167°F)
n Operating Temperature: 0°C to 65°C
(32°F to 149°F)
Flow Sensor
n PP: 12.5 bar @ 20°C, 1.7 bar @ 85°C
(180 psi @ 68°F, 25 psi @185°F)
n PVDF: 14 bar @ 20°C, 1.7 bar @ 85°C
(200 psi @ 68°F, 25 psi @ 185°F)
Operating Temperature:
n PP: -18°C to 85°C (0°F to 185°F)
n PVDF: -18°C to 85°C (0°F to 185°F)
STANDARDS & APPROVALS
n CE
n Enclosure rating: NEMA 4X/IP65
n UL
n Manufactured under ISO 9001:2000 and
ISO 14001:2004
The Signet 2537 Flow Sensor is the next generation in fluid measurement
technology from the inventor of the original paddlewheel flowmeter. It
has the added functionality of various output options.
APPLICATIONS
n Pump Protection
n Filtration Systems
n Demineralization/Regeneration
n Cooling Towers
n Proportional metering pump
FEATURES
n Digital (S3
L), or 4 to 20mA outputs, or Flow
Switch/Pulse Output (multi-function)
n Allows for up to six sensors to Signet 8900
Controller
n Low flow capabilities
n Built-in user interface for on-site
configuration
Signet 2537 Paddlewheel Flow Sensor
3-2537 Part Number
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 16
16_16 3/30/14 8:51 AM Page 16
Flowmeters and Process Controls
Quick Spec
GENERAL
Pipe size range: DN15 to DN 300 (0.5 in. to 12 in.)
Flow Range
n Minimum: 0.05 m/s (0.15 ft/s)
n Maximum: 10 m/s (33 ft/s)
Linearity: ±1% reading plus 0.01m/s (0.033 ft/s)
Repeatability: ±0.5% of reading @ 25°C (77°F)
Min. Conductivity: 20 S/cm
WETTED MATERIALS
Sensor body/Electrodes and Grounding ring:
n -P0, -P1, -P2: Polypropylene/316LSS
n -T0, -T1, -T2: PVDF/Titanium
n -V0, -V1, -V2: PVDF/Hastelloy-C
O-rings: FPM (standard), EPDM, Kalrez (optional)
Case: PBT
Display Window: Polyamide
Protection rating: NEMA 4X/IP65
ELECTRICAL
Power Requirements
n 4 to 20 mA: 21.6 to 26.4 VDC, 22.1 mA max.
n Frequency: 5 to 26.4 VDC, 15 mA max.
n Digital (S3L): 5 to 6.5 VDC, 15 mA max.
n Auxiliary (only required for units with relays):
9 to 24 VDC, 0.4A max
Reverse polarity and short circuit protected
MAX. PRESSURE/TEMPERATURE RATINGS
Storage Temperature: -20° to 70°C (-4° to 158°F)
Relative Humidity: 0 to 95% (non-condensing)
Operating Temperature
n Ambient: -10° to 70°C (14° to 158°F)
n Media: 0° to 85°C (32° to 185°F)
Maximum operating pressure:
10.3 bar @ 25°C (150 psi @ 77°F)
1.4 bar @ 85°C (20 psi @ 185°F)
2551 Magmeter Flow Sensor Material options include PP with stainless steel, PVDF with
stainless steel, PVDF with Hastelloy-C, or PVDF with Titanium.
Utilizing the comprehensive line of Signet installation fittings,
sensor alignment and insertion depth is automatic.
Signet 2551 Magmeters offer many output options of frequency/digital
(S3L), 4 to 20 mA or relays which are available
on both the blind and display versions. The frequency or
digital (S3L) sensor output can be used with Signet's extensive
line of flow instruments while the 4 to 20mA output can
be used for a direct input to PLCs, chart recorders, etc. Both
the 4 to 20 mA output and digital (S3L) sensor interface is
available for long distance signal transmission of up to 1,000
ft. An additional benefit is the empty pipe detection which
features a zero flow output when the sensors are not completely
wetted. Also, the frequency output is bi-directional
while the 4 to 20 mA output can be set for uni- or bi-directional
flow using the display or the 0250 USB to Digital (S3L)
Configuration / Diagnostic set-up tool which connects to PCs
for programming capabilities.
In addition the display version of the 2551 Magmeter is
available with relays and features permanent and resettable
total values which can be seen on the display.
Available in a variety of wetted materials and
ideal for pipe sizes up to DN300 (12 in.)
FEATURES
n Bi-directional flow
n Empty pipe detection
n Installs into pipe sizes DN 15 to DN 300 (0.5 to 12 in.)
n Flow rate range 0.05 to 10 m/s (0.15 to 33 ft/s)
n Accurate measurement even in dirty liquids
n Blind 4 to 20 mA, digital/frequency, relay output
n Corrosion resistant materials; PP or PVDF with SS,
Hastelloy C, or Titanium
Starting At
$
771 54
3-2551 Part Number
ERECTA SWITCH can sense small flows in liquids
or gas lines. Pressure differential across
a movable magnetic poppet operates a reed
switch and/or provides a visible indication of
flow through a transparent window.
5-20, 5-21 and 5-12H are the key elements
of the Series 5 ERECTA SWITCH product
group. When combined with ERECTA accessory
components, switch sets are formed providing
additional features and extending
application possibilities.
Although 5s are designed for small flow
applications (under 3 GPM), they can be
used in by-pass lines so flow can be sampled
and sensed without impeding flow efficiency.
Choice of Polypropylene Acetal or Kynar
PVDF plastics
Monitoring coolant flow, activating equipment
at flow turn-on, detecting flow in
spray/sprinkler systems are excellent applications
form this product.
Series 5 Flow Switches & Indicators
 Item# Set point PP Acetal Kynar
5-20-XX-(0.10)* 0.10 $72.60 $67.05 $158.40
5-21-XX-(0.10)* 0.10 50.76 61.43 115.80
5-21H-XX-(0.10)* 0.10 53.29 61.43 115.80
Same cost for these *Set Point options: (0.25), (0.50), (0.75) and (1.00) GPM.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 17
17_17 3/30/14 8:52 AM Page 1
Flowmeters and Process Controls
See page 22 for Conductivity/Resistivity Sensors
4 Displays free chlorine 0 to 20 ppm (mg/l)
4 Two programmable 4 to 20 mA outputs
4 Two mechanical relays
4 Temperature and pH compensation
4 Displays diagnostics, from sensor memory
4 Simple setup and easy customization
4 Backlit LCD display Item # Description Price
Basic Unit: 3-8630-3P Panel Mount Chlorine & pH Transmitter $658.13
Accessories: 3-8050.395 Splash proof rear cover 57.00
 3-0000.596 Heavy duty wall mount bracket 72.13
 3-5000.598 Surface mount bracket 38.71
 3-9000.392 Liquid tight connector kit for rear cover (3 connectors) 39.00
Sensors: 2650-7 Signet Amperometric 591.48
 2630-2 Signet Electrode 921.17
 3-4630.392 Signet Flow Cell Call
 Mounting Wire Sensor 4 to 20 mA
 Item # Version Power Input Output Open Collector/Relay Price
 3-8850-3 Field 4 1 2* 2 O.C.'s Hi, Lo, Pulse or Off 751.39
 3-8850-3P Panel 4 1 2* 2 O.C.'s Hi, Lo, Pulse or Off 751.39
 3-8050 Universal mounting kit 53.03
 3-8050.395 Transmitter NEMA 4X cover 46.16
 3-8052 3
⁄4" Integral mounting kit 58.16
 3-8050.396 RC Filter kit (for relay use) 18.47
* Conductivity/Resistivity or Temperature
The Signet 8850 Conductivity/ Resistivity Transmitter is
designed for broad application and ease of setup and
use. The unit can be used for conductance, resistance, or
TDS signal transmission and display. Mounting can be
accomplished in several options best tailored to your
application requirements. Full-microprocessor based
electronics allow wide operating range, and long term
signal stability due to the elimination of potentiometers,
jumpers and dip switches.
Quick Spec
Accuracy ±2% of reading
Enclosure:
n Rating: NEMA 4X/IP65 front
Sensor input range:
n Conductance: 0.055 to 400,000 S
n Resistivity: 10 K
to 18.2 M

n TDS: 0.023 to 200,000 ppm
n Temperature: PT 1000 (-13 to 248°F)
Current output:
n 4 to 20 mA, isolated, fully adjustable
and reversible
n Power: 12 to 24 VDC ±5%, regulated
Relay output:
n Hysteresis: User Adjustable
Open-collector output: Hi, Lo, Pulse, Off
n Open-collector, optically isolated, 50 mA
max, sink, 30 VDC max. pull-up voltage
CE and UL listed
Manufactured under ISO 9001
As Low As
$
41580
8850 Conductivity/Resistivity Transmitter
4 Display in S, mS, kohm, Mohm, ppm (TDS)
4 Programmable Temperature compensation
4 Dual output option allows temperature and process
signal transmission
4 2 x l6 character dot matrix LCD
4 Clearly marked terminal labels
Panel Mount
Field Mount
The Signet 3-8630-3P ProcessPro Chlorine Transmitter simultaneously
displays free chlorine and pH levels on a bright
LCD backlight display. The 8630 transmitter has two 4 to 20
mA outputs that can be programmed to transmit chlorine, pH
or temperature information to a data collection device. Two
dry-contact mechanical relays can be used to deliver an
alarm signal or activate a chlorine dosing system.
Signet 8630 Chlorine Transmitter
2650-7 2630-2 3-4630.392
4 Display and/or Control: S, mS, PPM, or PPB (TDS), K
, M

4 Four relays
4 % Rejection, Difference, Ratio, °C or °F
4 Time Delay Relay Function
4 Proportional Pulse Control Capability
4 Programmable Temperature Compensation
4 Output Simulation for System Testing
 Item # Code Description Price
Basic Unit: 3-8860 159000677 Conductivity/Resistivity Controller, DC Powered $997.53
 3-8860-AC 159000678 Conductivity/Resistivity Controller, AC Powered 1,056.24
Accessories: 3-8050.395 159000186 NEMA 4X Rear Cover 46.16
 3-9000.392 159000368 Liquid-tight Connector Kit for rear cover(3) 46.16
 3-8050.392 159000640 Model 200 Retrofit Adapter 56.31
 3-5000.399 198840224 5x5 inch Adapter Plate for +GF+ Signet retrofit 24.01
 3-0000.596 159000641 Heavy Duty Wall Mount Bracket 56.31
 3-5000.598 198840225 Surface Mount Bracket 30.47
 3-8050.396 159000617 RC Filter Kit (for relay use) 18.47
 3-2830 159000628 Conductivity Certification Tool 180.93
Quick Spec
Operating Range
n Conductivity: 0.055 to 400,000 S/cm
n Resistivity: 10 k
to 18.26 M

(0.055 to 100 S/cm)
n TDS: 0.001 to 999999 ppm or ppb
(display limit)
n Temperature: PT 1000: -25 to 120°C
(-13 to 248°F)
Power Requirements
n 3-8860-AC: 100 to 240 VAC ±10%,
50-60 Hz, 20VA
n 3-8860: 12 to 24 VDC ±10%,
reg., 0.5A max.
n Current Output: (3 each) 4 to 20 mA,
isolated, fully adjustable and reversible.
Max. Loop impedance: 150
@ 12V,
450
@ 18V, 750
@ 24V
n Open-collector outputs: (2 each)
Isolated, 50 mA sink or source, 30 VDC
max. pull-up voltage.
Operational Settings: Hi, Lo, USP, Pulse, Off
Maximum Pulse Rate: 400
pulses/minute
n Alarm Contacts: (up to 4 each) SPDT Relays
Max. voltage ratings: 5A @ 30 VDC
or 250 VAC
Operational Settings: Hi,Lo,USP, Pulse, OFF
Max. Pulse Rate: 400 pulses/minute
n Standards and Approvals: CE and UL
Manufactured under ISO 9001 AND
ISO 14001
The Signet 8860 Dual Channel Conductivity/Resistivity
Controller is a two-channel input device equipped with
three scalable 4 to 20mA outputs and four programmable
relays. A selector switch activates two open collector
outputs in place of two of the relays for extraordinary
output versatility. The four-button keypad arrangement
with intuitive software design is user-friendly, and the
NEMA 4X/IP65 integrity of the front panel can be
extended to the enclosure by using the optional Rear
Cover kit.
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 18
8860 Dual Channel
Con duc tiv i ty/Resistivity Con trol ler
3 Fully scalable
4 to 20 mA
outputs
3 Fully scalable
4 to 20 mA
outputs
18_18 3/30/14 8:54 AM Page 18
Measurement Type Flow, pH/ORP, Conductivity / Resistivity, Salinity, Pressure, Temperature, Level
8900 & 9900 or 3rd party devices with 4-20mA output
Flowmeters and Process Controls
Step 1: Determine Application Requirements
Defining the following variables before
building your system will ensure peak performance
from your Signet sensors and
instruments.
Step 2: Select Sensor Technology
Based on the application requirements determined
in Step 1, choose a sensor. Determine
your signal output requirement to allow you
to match just the right instrument (see Step
3). If you’re not purchasing an instrument,
select the sensor electronics package that
best suits your needs.
Step 3: Choose Instrument
Choose an instrument. Instruments are available
in ¼ DIN size and offered in panel
mount configurations. Field mount versions
are also offered for certain models.
Instruments are available with either digital,
analog, or analog/digital display. Various
retrofit adapters and mounting accessories
are also available (see Accessories section).
In cases where the sensor feeds directly to a
PLC or PC system, GF offers a wide range of
instruments and sensors with 4 to 20 mA
outputs.
Step 4: Determine Installation Requirements
GF offers a wide selection of installation fittings
for flow sensors and in-line pH/ORP
electrodes. These fittings are specifically
designed to ensure the proper placement of
the flow sensor in the piping system to
achieve optimum performance. Other
pH/ORP electrodes as well as all temperature,
pressure and conductivity/resistivity
electrodes use NPT or ISO standard fittings.
All submersion electrodes require conduit
piping and fixtures not supplied with unit.
Signet Multi-Parameter Transmitters & Batch Controller Specifications
9900 9900-BC 8900
Description Single-Channel, Single-Channel, Multi-Channel,
Multi-Parameter Transmitter Single Parameter Controller Multi-Parameter Controller
Modular Componenets Yes Yes Yes
Number of Totalizers 1 Permanent 6 Permanent
1 Resettable 6 Resettable
Max. Sensor Inputs 1 1 (up to 2 frequency)
6 total sensor inputs
Mounting Options Panel, Wall, Pipe, Tank Panel Panel
Display LCD with digital bar graph LCD with digital bar graph LCD
Analog Output Types Passive 4 to 20 mA (2) Passive 4 to 20 mA (4) Passive/Active 4 to 20 mA
or (4) 0 to 5/10 VDC
Max. Relays / O.C. 1 open collector 1 open collector up to 8 relays (via 8059) 2 relays (optional relay module) 2 relays
Derived Measurements
Sum, Difference, % Recovery,
N/A N/A % Reject, % Passage, Ratio,
Power (BTU)
Operating Temperature Backlit LCD: -10°C to 70°C, LCD: -10°C to 55°C,
14°F to 158°F 14°F to 131°F
Relative Humidity 0 to 95%, non-condensing 0 to 95%, non-condensing 0 to 95%, non-condensing
Power Requirements
12 to 24 VDC ±10%, regulated or 24 VDC input; range: 10.8 to 35.2 VDC 100 to 240 VAC ±10%, regulated 10.8 to 35.2 VDC regulated ±10%, regulated recommended, 50/60 Hz
CE, FCC, UL, CUL, CE, FCC, UL, CUL, RoHS compliant, China RoHS RoHS compliant, China RoHS CE, FCC, UL, CUL,
Standards and Approvals NEMA 4X/IP65 (front face only NEMA 4X/IP65 RoHS compliant, China RoHS
on panel mount); field mount is (front face only) NEMA 4X/IP65
100% NEMA 4X/IP65
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 19
 Item # Description Price
Base Unit, required; choose one
3-8900 Base unit with back-lit LCD $355.59
I/O Module, required; choose one
3-8900.401-1 Two inputs, no outputs 147.26
3-8900.401-2 Two inputs, two passive 4 to 20mA outputs 244.24
3-8900.401-3 Two inputs, two active 4 to 20mA outputs 308.90
3-8900.401-4 Two inputs, two 0 to 5/10 VDC outputs 446.28
3-8900.401-5 Four inputs, no outputs 352.00
3-8900.401-6 Four inputs, two passive 4 to 20mA outputs 464.24
3-8900.401-7 Four inputs, two active 4 to 20mA outputs 533.37
3-8900.401-8 Four inputs, two 0 to 5/10 VDC outputs 554.03
3-8900.401-9 Six inputs, no outputs 460.01
3-8900.401-10 Six inputs with two passive loop out (needs ext. power supply) 573.08
3-8900.401-11 Six inputs with two active loop outputs 642.31
3-8900.401-12 Six inputs with two voltage outputs 663.08
Power Module, required; choose one
3-8900.402-1 85 to 264 VAC power 171.50
3-8900.402-2 12 to 24 VDC power 113.15
Relay Module, optional; choose zero, one or two
3-8900.403-1 Two dry-contact relays 102.37
3-8900.403-2 Two solid-state relays 106.86
External Relay Module, optional; choose zero or one
3-8059-4 Four external dry-contact relays 293.63
3-8059-4AC Four external dry-contact relays with power supply 400.48
Additional Outputs, optional; choose zero or one
3-8900.405-1 Two passive 4 to 20mA outputs 159.84
3-8900.405-2 Two active 4 to 20mA outputs 218.21
3-8900.405-3 Two 0 to 5/10 VDC outputs 250.53
8900 Multi-Parameter Controller
The 8900 Multi-Parameter Controller takes
the concept of modularity to the extreme.
Ultimate flexibility is achieved via plug-in
modules for either two or four input channels,
universal AC line voltage or 12 to 24 VDC
operation, up to four analog outputs, and up
to four relays. The controller will support up
to four additional relays, for a total of eight,
by way of external relay modules. Absolute
input versatility allows mixing and matching
of up to four sensors with S3
L™ output including
pH, ORP, conductivity/resistivity, pressure, temperature, and level. Two of the possible four
input channels may be used for any combination of the many +GF+ SIGNET flow sensors with
frequency output. The table below identifies sensor models available for use with this controller.
Quick Spec
n Modular configurability
n Absolute input versatility up to six channels
n 1/4 DIN enclosure
n S
3
L™ digital connectivity for pH, ORP,
flow, conductivity, level, temperature and
pressure
n Frequency input for many flow sensor
options
n Derived measurements: Difference, Sum,
Ratio, % Recovery, % Rejection, % Passage
n Up to four analog outputs
n Up to eight relays
n Display options
19_19 3/30/14 8:57 AM Page 19
Flowmeters and Process Controls
Quick Spec
n “Dial-type” digital bar graph
n Consistent with legacy ProPoint® &
ProcessPro® devices
n Optional field upgradable relays
n 4 to 20 mA input (optional 8058 Signal
Converter)
n Warning LED indicator
n Custom 13-character label capabilities
n Factory reset capability
n Optional PC COMM configuration tool
n Optional H COMM module for two-way
communication
n Optional Batch Module for Batch Control
Quick Spec
n Customize 10 batch names for easy distinction
between batches
n Modular Design - Can be purchased as a
complete system or add a Batch Module
and Relay Module to an existing 9900
Transmitter (Generation II)
n 3 programmable relays, one open
collector, two dry-contact relays
n Confirmation START/RESUME – Can
prompt user prior to starting each batch
with a Yes/No
n Enter 10 different K-Factors - one per batch
for when different liquids are batched
The Batch Controller provides control capability and
process fine-tuning in a familiar package. The programming
interface uses a four button keypad and an
intuitive menu for adjusting a batching system to the
best performance possible. Choose between simple or
advanced modes. Simple mode, relay outputs can be used for batching, external counter, missing
signal alarm and 4 to 20 mA output can be used to indicate batch status.
Advanced mode relays can also be used for end of batch pulse, two stage Shut down, overrun
alarm, high flow detection, total volume or source volume alarm. 9900-1BC can save up to 10
batch sizes for batching or blending a variety of liquid volumes. Customize batch names for easy
n Batch Process
n Filter Backwash Initiation
n Chemical Addition
n Canning and Bottling
n Tank Filling
n Bulk Storage Transfer
n Chemical Processing
n Food and Beverage
n Life Sciences
n Water Treatment
Items # Description Price
9900 Base Unit - Single Channel, Multi Parameter, 4-20mA Open Collector, DC Power
3-9900-1P 9900 Panel Mount Transmitter $423.85
3-9900-1 9900 Field Mount Transmitter 423.85
3-9900-BC Batch Controller System 840.76
Modules
3-9900.393 Relay Module 2DCR “Dry-Contact Relay” (panel unit only) 83.08
3-9900.394 Direct Conductivity / Resistivity Module 169.23
3-9900.395 H COM Module 219.23
3-9900.397 Batch Module 349.17
3-9900.398-1 Output Module 4-20mA 136.00
Accessories
6682-0204 Conductivity Module Plug, 4 Pos, Right Angle 22.00
6682-1102 Open Collector Plug, 2 Pos, Right Angle 17.00
6682-1103 Relay Module Plug, 3 Pos, Right Angle 17.00
6682-1104 Power/Loop Plug, 4 Pos, Right Angle 22.00
6682-3104 S³L/Freq Plug, 4 Pos, Right Angle 22.00
6682-3004 S³L/Freq Plug, In-Line 44.00
3-0251 PC COMM Configuration Tool 191.12
3-8050 Universal Mount Kit 64.00
3-9900.390 Standard Connector Kit Right Angle(incl. with Transmitter) 44.00
3-9900.391 Optional Connector Kit, In-Line, 9900 Transmitter 98.27
3-9900.392 Wall Mount Accessory Kit 9900 191.54
3-9900.396 Angle Adjustment Adapter Kit (field mount) 27.00
This Transmitter provides a single channel interface for many different parameters. The
Transmitter (Generation II) has the added capability of supporting the Batch Module for batching
control. The extra large (3.90” x 3.90”) autosensing backlit display features “at-a-glance”
visibility The display shows separate lines for units, main and Secondary measurements as well
as a “dial-type” digital bar graph.
Both configurations can run on 12 to 32 VDC power. Designed for complete flexibility, plug-in
modules allow the unit to easily adapt. Optional modules include Relay, Direct
Conductivity/Resistivity, H COMM, Batch and a PC COMM configuration tool. The unit can be
used with default values for quick and easy programming or can be customized with labeling,
adjustable minimum and maximum dial settings, with unit or decimal options.
Signet 9900 Transmitter
APPLICATIONS
APPLICATIONS
n Wastewater Treatment
n Reverse Osmosis
n Deionization
– Ultra Pure Water
– Two Bed System
– Mixed Bed System
n Metal and Plastic Finishing
n Fume Scrubber
n Cooling Towers
n Media Filtration
Signet 9900-1BC Batch Controller System Signet 9900-1BC Batch Controller System
3-9900.393
3-9900.394
3-9900.395
3-9900.397
Items # Description Price
9900-1BC Batch Controller System
3-9900-BC Batch Controller System $840.76
3-9900-1P 9900 Panel Mount Transmitter 423.85
Modules
3-9900.393 Relay Module 2DCR “Dry-Contact Relay” (panel unit only) 83.08
3-9900.397 Batch Module 349.17
Accessories: See 9900 chart above.
NEW
distinction between batches. One K-Factor can be used for all batches, or use a different K-Factor
for each batch for when different liquids are batched. User can choose to be prompted prior to
starting a batch with a Yes/No or with a password to prevent inadvertently starting a batch.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 20
20_20 3/30/14 9:04 AM Page 20
Flowmeters and Process Controls
2774-2777 Threaded DryLoc™
pH/ORP Electrode
The Signet 2774-2777 pH and ORP Electrodes feature a unique foul-proof
DryLoc™ connector with gold-plated contacts designed specifically for use with
the Signet 2750 and 2760 preamplifiers, sensor electronics, and connectors.
These dependable and highly responsive electrodes feature a Teflon™ double
reference junction and a large reference chamber that combine to extend the
service life. Embedded positioning of the temperature element in the pH/ORP
sensing tip allows the temperature response to be quick and accurate.
 Item # Description Price
3-2774 Flat pH Electrode, 3K ohm TC $338.00
3-2774-1 Flat pH Electrode, PT1000 TC 338.00
3-2775 Flat ORP Electrode, 10 K ID 354.73
3-2775-1 Flat ORP Electrode, no TC 354.73
3-2776 Bulb pH Electrode, 3K ohm TC 304.53
3-2776-1 Bulb pH Electrode, PT1000 TC 304.53
3-2777 Bulb ORP Electrode, 10 K ID 320.43
3-2777-1 Bulb ORP Electrode, no TC 320.43
2774-2777 Series pH and ORP 3
⁄4" Threaded Electrodes w/DryLoc connection
2724-2726 pH/ORP Electrodes
n DryLoc connector with foul-proof gold plated contacts
n Ryton® threaded sensor body
n Choice of flat pH, bulb pH, or flat ORP sensing elements
Starting At
$
21532
The Signet 2724-2726 pH and ORP Electrodes feature a
patented reference electrode design and uses the unique foulproof
patented DryLoc® connector. The large area PE reference
junction and pathway is constructed to increase the total reference
effectiveness and ensures long service life.
2734-2736 pH/ORP Electrodes
The Signet 2734-2736 electrodes are ideal for a wide range of
harsh applications. Large Area PTFE reference junction resist
fouling and chemical attack. Enhanced reference and bridge gels
to resist chemical poisoning and prolong the life of the electodes.
2724 - 2726 2734 - 2736
Item # Price Item # Price Description
3-2724-00 $254.03 3-2734-00 $377.42 Flat- 3
⁄4" NPT Thread
3-2724-01 254.03 3-2734-01 377.42 Flat- ISO 7/1-R 3
⁄4" Thread
3-2726-00 215.32 3-2736-00 354.84 Bulb- 3
⁄4" NPT Thread
3-2726-01 215.32 3-2736-01 354.84 Bulb- ISO 7/1-R 3
⁄4" Thread
3-2726-HF-00 310.48 3-2736-HF-00 421.77 Bulb-, HF Resistant, 3
⁄4" NPT Thread*
3-2726-HF-01 310.48 3-2736-HF-01 421.77 Bulb-, HF Resistant, ISO 7/1-R 3
⁄4" Thread*
3-2726-LC-00 254.03 Bulb-, Low Conductivity, 3
⁄4" NPT Thread**
3-2726-LC-01 254.03 Bulb-, Low Conductivity, ISO 7/1-R 3
⁄4" Thread**
 3-2734-HF-00 421.77 Flat-, HF Resistant, 3
⁄4" NPT Thread*
 3-2734-HF-01 421.77 Flat-, ISO 7/1-R 3
⁄4" Thread*
ORP Electrodes Compatible with both the 2750 sensor electronics* & 2760 preamplifier**
3-2725-60 274.19 Flat- 3
⁄4" MNPT Thread
3-2725-61 274.19 Flat- ISO 7/1-R 3
⁄4" Thread
 3-2735-60 399.19 Flat-, 10K, 3
⁄4" NPT Thread
 3-2735-61 399.19 Flat-, 10K, ISO 7/1-R 3
⁄4" Thread
Temperature element 3 K? Balco: use with 2760 preamplifier** or 2750 sensor electronics*
3-2724-10 254.03 Flat- 3
⁄4" NPT Thread
3-2724-11 254.03 Flat- ISO 7/1-R 3
⁄4" Thread
3-2724-HF-10 350.01 Flat-, HF Resistant, 3
⁄4" NPT Thread*
3-2726-10 215.32 Bulb- 3
⁄4" NPT Thread
3-2726-11 215.32 Bulb- ISO 7/1-R 3
⁄4" Thread
3-2726-HF-10 310.48 Bulb-, HF Resistant, 3
⁄4" NPT Thread*
3-2726-HF-11 310.48 Bulb-, HF Resistant, ISO 7/1-R 3
⁄4" Thread*
3-2726-LC-10 254.03 Bulb-, Low Conductivity, 3
⁄4" NPT Thread**
3-2726-LC-11 254.03 Bulb-, Low Conductivity, ISO 7/1-R 3
⁄4" Thread**
*The 2750 Sensor electronics has a digital (S³L) output which is used with 8900 or 9900. Also has a 4-
20mA output for connections to PLC’s, data recorder, etc. **The 2760 preamplifier is used for connection
directly to Signet 8750 Transmitter or other analog transmitters. Note: The 2734 and 2736 electrodes are
not compatible with the Signet 2760 or 8750 instrument.
Signet 2760 DryLoc® pH/ORP Preamplifiers
& Connectors
The 2760 preamplifier allows any DryLoc pH/ORP
electrode to work with Signet ProcessPro® and
ProPoint® pH/ORP instruments. It is also sold as a
simple connector for use with other manufacturers’
instruments that do not require a preamplified signal.
The 2760 pH/ORP Preamplifiers are compatible with
the Signet 5700, 8750 and older analog transmitters. The 8900 and 9900 Transmitters require
the use of the 2750 sensor electronics, and are not compatible with the 2760 preamplifier.
Signet 2750 DryLoc® pH/ORP Sensor Electronics
The 2750 has a preamplified signal
and features two different outputs:
a two-wire 4 to 20 mA loop output
with EasyCal function or a digital
(S3L) output which allows for
longer cable lengths and is compatible
with the Signet 8900 or 9900
instruments
n In-line integral mount and submersible installation versions
n Automatic temperature compensation
n Auto configuration for pH or ORP operation
n Optional EasyCal calibration aid with automatic buffer recognition
n Junction boxes for convenient wiring
n Patented DryLoc® connector provides a quick and secure connection to the sensor
Item # Description Price
2750 In-Line Sensor Electronics (Yellow Body)
3-2750-1 Recommended for 8900 or 9900 instruments $351.62
3-2750-2 with EasyCal, recommended for 4-20mA use 386.29
3-2750-7 pH electronics, Digital (S3L), 15’ cable 335.49
2750 Submersible Sensor Electronics (Gray Body)
3-2750-3 With 15’ cable and ¾ NPT threads – when 4-20mA is required 333.06
use the 3-8050-2 junction box with EasyCal
3-2750-4 Submersible sensor electronics with 15’ cable and ISO 7/1R ¾” threads – 333.06
when 4-20mA is required use the 3-8050-2 junction box with EasyCal
2760 In-Line pH/ORP Preamplifier (Gray body) for use with the 8750 instrument
3-2760-1 15’ cable and 3/4” NPT 220.97
3-2760-2 15’ cable and ISO 7/1R 3/4 thread 220.97
2760 Submersible pH/ORP Preamplifier (Yellow body) use with Signet fittings
or wet-tap sensors & other manufacturers instruments
3-2760-11 15’ cable and 3/4” NPT 220.97
3-2760-21 15’ cable and ISO 7/1R 3/4 thread 220.97
2760 Submersible Connector (gray body) for use with another manufacturer’ s instruments
3-2760-3 15’ cable and 3/4” NPT 171.77
3-2760-4 15’ cable and ISO 7/1R 3/4 thread 171.77
2760 In-line pH/ORP Connector (yellow body) use with Signet fittings or wet-tap
sensors & other manufacturers instruments
3-2760-31 15’ cable and 3/4” NPT 171.77
3-2760-41 15’ cable and ISO 7/1R 3/4 thread 171.77
The 2750 submersible pre-amp can be used as an In-line pre-amp when used with the ¾" or 1" threaded
sensors including the 2724, 2774 and 2764. The pre-amp can be used with Signet fittings up to 4" and
wet-tap assemblies. Mounting junction box; 3-8050-1 Universal, 3-8051-2 w/EasyCal.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 21
21_21 3/30/14 9:06 AM Page 21
Flowmeters and Process Controls
The Signet 2714 and 2716 pH Electrodes feature a combination design with
mea sure ment, reference, and temperature compensation element in one package.
The plastic body construction and unique connection design makes
removal and replacement of the electrodes so simple it can be done in seconds.
NOTE: For use with the Signet 2720 Pre-amplifier.
2715/2717 ORP Elec trodes
The Signet 2715 and 2717 ORP Electrodes feature a double-junction combination
electrode with unique integral I.D. resistor for automatic sensor recognition
by the Signet 8710 pH/ORP Transmitter. The chemically resistant CPVC body,
and twist-lock connection make removal and replacement of electrodes fast
and simple. NOTE: For use with the Signet 2720 Pre-amplifier.
2714/2716 pH Elec trodes
 Item # Description Price
3-2724-10 Electrode, pH, Flat, 3K, NPT $242.96
3-2726-HF10 Bulb, pH, HF Resistant, 3K, NPT 297.25
3-2726-10 Bulb, pH, 3K, NPT 206.23
3-2726-LC10 Bulb, pH, Low Conductivity, 3K, NPT 229.03
3-2725-60 Flat ORP, NPT 262.17
 Item # pH Electrode Price Item # ORP Electrode Price
3-2764-1 Flat pH Electrode, 3K ohm TC $392.12 3-2765-1 Flat ORP Electrode, 10K ID $422.04
3-2764-2 Flat pH Electrode,PT1000 TC 401.26 3-2765-2 Flat ORP Electrode, PT1000 TC 430.34
3-2764-3 Flat pH Electrode, 300 ohm TC 392.12 3-2765-3 Flat ORP Electrode, 300 ohm TC 422.04
3-2766-1 Bulb pH Electrode, 3K ohm TC 369.70 3-2767-1 Bulb ORP Electrode, 10 K ID 399.60
3-2766-2 Bulb pH Electrode, PT1000 TC 378.83 3-2767-2 Bulb ORP Electrode, PT1000 TC 407.91
3-2766-3 Bulb pH Electrode, 300 ohm TC 369.70 3-2767-3 Bulb ORP Electrode, 300 ohm TC 399.60
1220-0021 O-Ring FPM 3.59
3-2700.395 pH Buffer kit with box, pH 4 and pH 7 buffers, and 3 PP reusable cups 62.31
 Item # Description Price
3-2819-S1 CR Sanitary .01, SS, 1" $615.60
3-2819-S2 CR Sanitary .01, SS, 2" 727.75
3-2820-S1 CR Sanitary 0.1, SS, 1" 585.69
3-2820-S2 CR Sanitary 0.1, SS, 2" 692.86
3-2821-S1 CR Sanitary 1.0, SS, 1" 585.67
3-2821-S2 CR Sanitary 1.0, SS, 2" 692.86
.01 Cell constant available in Titanium. NIST Traceable Certificates available for an additional charge.
Pressure: 100 PSI, 32 to 149 °F; 58 PSI, 150 to 185 °F
2819/2820/2821 Conductivity Sensors
2822/2823 Conductivity Sensors
The Signet 2819/2820/2821 Conductivity Sensors offer
high performance and reliability. Controlled surface
finish and integral temperature
compensation devices ensure accurate
conductivity measurement.
 Item # Cell Constant Temp. Comp. Range (S) Price
 3-2819-1 Cond. Cell K=0.01 PT-1000 0.055 to 100 S (lOK
to18.3M
) $295.06
 3-2820-1 Cond. Cell K=0.1 PT-1000 1 to 1000 S 293.41
 3-2821-1 Cond. Cell K=1.0 PT-1000 10 to 10,000 S 293.41
NIST Traceable Certificates available for an additional charge.
COMPATIBILITY
2850 Conductivity Sensor Electronics, 8850 Cond/Resist Transmitter, 8860 Cond/Resist
Controller, 8900 & 9900 Multi-Parameter with the 2850 Sensor Electronics
 Item # Cell Constant Temp. Comp. Range (S) Price
 3-2822-1 Cond. Cell K=10.0 PT-1000 100 to 200,000 S $486.83
 3-2823-1 Cond. Cell K=20.0 PT-1000 200 to 400,000 S 584.86
 32820390 3
⁄4" NPT 316SS Fitting for Submersion 164.49
2822
2823
Quick Spec
n Construction Materials: CPVC with
Viton® O-rings
n Temperature Range:
32 to 185 °F (0 to 85 °C Bulb)
50 to 185 °F (10 to 85 °C Flat)
n Submersible and in-line mounting
capability
n Double-junction combination electrode
n Electrode: Platinum Rod
n Reference Electrode: Ag/AgCI
Quick Spec
n Field-proven differential design for stable
measurements in the most aggressive
applications
n Water-tight DryLoc connector with foulproof
gold contacts
n PTFE reference junction
n Rebuildable reference electrode
n Solution ground
n Integral temperature sensor. Quick temperature
response
n Easy sensor replacement using DryLoc
electrode connector
n Compatible with other suppliers' instruments
Quick Spec
n Temperature: 212°F max. (opt. 316 SS
fitting: 32820392; 248 °F)
n Pressure: 100 psi max. (opt. 316 SS
fitting: 32820392; 200 psi)
n Pipe Size Range: 3
⁄4 in. and larger
n Materials: Body: 316 Stainless Steel
Insulator: Teflon®
O-rings: EPR
Fitting: 3
⁄4 in. MNPT Polypropylene
(reversible for submersion)
Optional: 1
⁄2 in. MNPT 316 Stainless Steel
Quick Spec
2823
n Temperature: 302 °F max.
n Pressure: 100 psi max.
n Pipe Size Range: 3
⁄4 in. and larger
n Materials: Body: 316 Stainless Steel
Insulator: Teflon® O-rings: EPR
Fitting: 3
⁄4 in. MNPT 316 Stainless Steel
(reversible for submersion)
2822
n Temperature: 203 °F max.
n Pressure: 100 psi max.
n Pipe Size Range: 3
⁄4 in. and larger
n Materials: Body: 316 Stainless Steel
Insulator: CPVC O-rings: EPR
Fitting: 3
⁄4 in. MNPT 316 Stainless Steel
Optional: 32820390 316 Stainless Steel
3
⁄4 in. MNPT fitting for submersion
Quick and Easy
Replacement
The Signet Sanitary Conductivity/Resistivity sensors are constructed of 316L SS or Titanium
with Teflon insulation in cell constant values of 0.01, 0.1 and 1.0. Certified versions are also
available with cell constant values determined to ±1%. When used with Signet’s 5800CR
Conductivity/Resistivity Monitor the system meets USP-23 criteria for conductivity.
COMPATIBILITY
2850 Cond/Resist Sensor Electronics, 8850 Cond/Resist Transmitter, 8860 Cond/Resist Controller,
8900 & 9900 Multi-Parameter with the 2850 Sensor Electronics
The Signet 2822/2823 Conductivity Sensors offer higher pressure and temperature specifications.
The flow-through design ensures continuous measurement without air entrapment.
Compatible with 2850 Cond/Resist Sensor Electronics, 8850 Cond/Resist Transmitter, 8860
Cond/Resist Controller, 8900 & 9900 Multi-Parameter with the 2850 Sensor Electronics
n Reversible 3
⁄4" process connection for submersion or in-line use Integral platinum temperature sensor
n Designed to meet USP 23 requirements for Pharmaceutical industry.
n Good for Semicon & CIP applications.
n Controlled surface finish
Sanitary Conductivity Sensors
Webb Price Only
$
293 41
As Low As
$
486 83
Tri-Clover process connection
2764-2767 Differential DryLoc®
pH-ORP Electrodes
The Signet 2764-2767 Differential pH & ORP electrodes are built with
the DryLoc® connector a Ryton® body and TeflonT reference junction to
handle even the most extreme and harshest of chemical applications.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 22
22_22 3/30/14 9:08 AM Page 22
Flowmeters and Process Controls
Call for the Best Prices on Sensor Fittings for all Signet Sensors Sensor Installation Fittings
 Pipe Mat'l PVC 80 CPVC 80 PVDF Polypropylene S.S. 316 Iron Carbon Steel Metalex
 Size Item # Item # Item # Item # Item # Item # Item # Item #
 (in.) Price Price Price Price Price Price Price Price
 1
⁄2 MPV8T005F MCPV8T005F SFMT005 PPMT005 CR4T005 N/A CS4T005 P529-2005
 $99.03 $109.17 $226.74 $159.26 $360.92 $253.81 $339.93
 3
⁄4 MPV8T007F MCPV8T007F SFMT007 PPMT007 CR4T007 N/A CS4T007 P529-2007
 $99.03 $109.17 $226.74 $159.26 $360.92 $253.81 $339.93
 1 MPV8T010F MCPV8T010F SFMT010 PPMT010 CR4T010 IR4T010 CS4T010 P529-2010
 $99.03 $109.17 $249.23 $170.95 $360.92 $109.47 $253.81 $339.93
 11
⁄4 MPV8T012F MCPV8T012F SFMT012 PPMT012 CR4T012 IR4T012 CS4T012 P529-2012
 $110.67 $125.97 $271.72 $199.00 $184.44 $109.47 $135.97 $230.35
 11
⁄2 MPV8T015F MCPV8T015F SFMT015F PPMT015 CR4T015 IR4T015 CS4T015
 $116.50 $132.26 $300.51 $231.54 $232.25 $109.47 $194.39
 2 MPV8T020F MCPV8T020F SFMT020F PPMT020 CR4T020 IR4T020 CS4T020 P529-2020
 $128.14 IR8S020 $346.40 $283.42 $286.91 $109.47 $248.77 $230.35
 MPV8S020 IR8S020
 $151.60 $138.45
 21
⁄2 PV8T025 USE SFMTF025 PPMTE025 CR4W025 IR8S025 CS4W025 P529-2025
 $208.71 IR8S025 $846.66 $427.37 $489.57 $179.23 $129.93 $230.35
 PV8S025 PPMTF025
 $133.97 $470.56
 3 PV8T030 USE SFMTF030 PPMTE030 CR4W030 IR8S030 CS4W030 P529-2030
 $208.71 IR8S030 $908.73 $435.47 $489.57 $179.23 $129.93 $230.35
 PV8S030 PPMTF030
 $157.26 $478.66
 4 PV8T040 USE SFMTF040 PPMTE040 CR4W040 IR8S040 CS4W040 P529-2040
 $249.49 IR8S040 $994.34 $464.28 $489.57 $179.23 $129.93 $230.35
 PV8S040 PPMTF040
 $185.43 $510.15
 6 PV8S060 USE SFMTF060 PPMTE060 CR4W060 IR8S060 CS4W060 P529-2060
 $284.51 IR8S060 $1,292.02 $558.75 $514.63 $254.35 $168.20 $230.35
 PPMTF060
 $614.52
 8 PV8S080 USE SFMTF080 PPMTE080 CR4W080 IR8S080 CS4W080 P529-2080
 $349.62 IR8S080 $2,019.92 $723.41 $514.63 $265.08 $168.20 $230.35
 PPMTF080
 $796.27
















Type 2350 Temperature Sensor
Max. Cable 1
⁄2" Male Union 3
⁄4" Male NPT
Operation Output Length Item # Price Item # Price
10 psi Digital (S³L) 15 ft. 3-2450-3U $392.15 – –
50 psi Digital (S³L) 15 ft. 3-2450-3L 392.15 3-2450-1L $392.15
250 psi Digital (S³L) 15 ft. 3-2450-3H 392.15 – –
10 psi 4-20 mA 15 ft. 3-2450-7U 475.61 – –
50 psi 4-20 mA 15 ft. 3-2450-7L 475.61 3-2450-5L 475.61
250 psi 4-20 mA 15 ft. 3-2450-7H 475.61 3-2450-5H 475.61
Type 2450 Pressure Sensor
n Wetted Materials: PDVF
n Additional features: Platinum RTD in extended
tip for quick response
n In-line Mounting styles: 3
⁄4 inch NPT
n Submersible mounting: 3
⁄4 inch NPT
n Operating Temperature:** In-line: 14 to 212°F
n Submersible: 14° to 185°F
n Operating Pressures:** 0 to 232 psi
n Compatibility: 8350 or 8900
Item # Output Cable Length Price
3-2350-1 Digital (S³L) 15 ft. $233.45
3-2350-3 4-20 mA 15 ft. 307.38
n Wetted Materials: PVDF, ceramic, FPM
n Additional features: Level and depth measurement capability
n In-line Mounting styles: 3
⁄4 inch NPT or 1
⁄2 inch male union
n Submersible mounting:
3
⁄4 inch NPT
n Operating Temperature:**
5° to 185°F
n Operating Pressures:**
-XU Ultra Low: 0 to 10 psi
-XL Low: 0 to 50 psi
-XH High: 0 to 250 psi
n Level Ranges:*
-XU Ultra Low: 0 to 23.06 ft
-XL Low: 0 to 115.32 ft
-XL High: 0 to 576 ft
n Compatibility: 8250, 8450
and 8900
**Check operating temperature/pressure graphs in catalog for derating information. *Level ranges calculated using specific gravity of water. Max. ranges vary for other liquids
Webb tech tip
Installation
For maximum linearity and accuracy, the sensor
should be located in a straight run of pipe
upstream and downstream of the sensor.
Major obstructions such as pumps or throttled
valves will require longer straight runs.
See Transmitters - Page 15
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 23
23_23 3/30/14 9:10 AM
Flowmeters and Process Controls
Item # Description Price
3719 Wet-Tap Housing
3-3719-11 Wet-Tap Assembly, 1.5 in. NPT $699.80
3-3719-21 Wet-Tap Assembly, 2 in. NPT 734.03
3-3719-12 Wet-Tap Assembly, ISO 7/1-R 1 .5 699.88
3-3719-22 Wet-Tap Assembly, ISO 7/1-R 2 734.03
pH & ORP Sensors & Electrodes
3-2716-WT Twist-Lock pH Electrode (use with +GF+ SIGNET 2720 Preamplifier) 297.22
3-2717-WT Twist-Lock ORP Electrode (use with +GF+ SIGNET 2720 Preamplifier) 344.95
3-2760-1 Preamplifier, NPT 210.98
3-2760-2 Preamplifier, ISO 210.98
3-2756-WT DryLoc™ pH Electrode (use with 2750 pH/ORP Sensor) 283.70
3-2756-WTP DryLoc™ pH (plastic) Electrode (use with 2750 Sensor Electronics) 283.70
3-2756-WTP-1 DryLoc™ pH (plastic) Electrode (use with 2760 Preamplifier) 283.70
3-2757-WTP DryLoc™ ORP (plastic) Electrode (use with 3719 Wet-Tap Assembly only) 283.70
3-2757-WT DryLoc™ ORP Electrode (use with 2750 pH/ORP Sensor) 317.03
3-2750-1 In-line DryLoc™ pH/ORP Sensor with Junction Box 335.95
3-2750-2 In-line DryLoc™ pH/ORP Sensor with Junction Box and EasyCal 369.27
Spare Parts
1220-0114 3719 O-Ring, FPM 3.59
3-3719.390 3719 Locking Shroud 161.22
1220-0021 Electrode O-Ring, FPM 359.26
3719 pH/ORP Wet-Tap
The Signet 3719 pH/ORP Wet-Tap allows
installation and removal of pH or ORP electrodes
without the need for process shutdown
during routine electrode maintenance and
calibration. Process isolation is achieved with
a double O-ring seal on a unique and compact
retraction assembly; no separate valve is
required. A cam activated automatic locking
mechanism, SafeLoc™, and the short stroke
design help to assure operator safety.
TECHNICAL DATA
Wet-Tap
n Operating Pressure: 100 psi (6.9 bar) max.
n Materials:
Retraction Housing (Wetted): CPVC
O-rings (Wetted): FPM
Locking Shroud: PVC
Hardware: 316 stainless steel
n Maximum Flow Velocity: 10 ft/s
Environmental
n Storage Temperature: -15 to 120°C
(5 to 248°F)
n Process Temperature: 0 to 80°C
(32 to 176°F)
Electrode
n Operating Range: pH: 0 to 14 pH
ORP: -2000 to +2000 mV
n Accuracy: ±0.1% over full range
n Temp. Sensor (pH): 3K Balco (3-2716-WT)
PT-1000 (3-2756-WT)
n Temp. & Pressure Limit: 6.9 bar @ 65°C
(100 psi @ 149°F)
n Wetted Materials:
Body: Glass
Junctions: Porous PTFE
Sensing surface: Glass Membrane (pH),
Platinum (ORP)
O-rings: FPM
Environmental
n Storage Temperature: 0° to 85°C
(32° to 185°F)
n Process Temperature: 0° to 85°C
(32° to 185°F)
Quick Spec
n Automatic process isolation upon electrode
retraction - no separate valve required
n Compatible with DryLoc™ Electrodes for
use with 2760 Preamplifier or 2750
pH/ORP Sensor Electronics
SYSTEM OVERVIEW
a) Low-profile Clamp-on Saddle
Fitting (sizes 2.5 to 12 in.)
b) 3719 Wet-Tap Assembly
c) 2716-WT or 2717-WT
Twist-Lock pH or ORP
Electrode
d) 2760 Preamplifier
e) Signet pH/ORP Instrument
f) 2756-WT or 2757-WT
DryLoc™ pH or ORP Electrode
g) 2750 DryLoc™ pH/ORP Sensor with Junction Box
h) Output signal options - see 2750 Data Sheet for details
Note: To purchase a complete system, customer must
choose [a & b], "and select either [c, d & e] OR [f & g].
Signet 2839-2842
Conductivity Electrodes
The Signet 2839-2842 Conductivity/
Resistivity Electrodes are available in four
cell constants from 0.01 to 10.0 cm-1, and
are suitable for a wide variety of applications
from high purity water quality monitoring
to weak acids and bases. 316SS electrode
surface finishes are controlled in a precision
bead blasting operation to ensure measurement
accuracy and repeatability.
Quick Spec
RANGE:
n 2839: 0.055 to 100μS (18.2MΩ
to 10KΩ) (0.02 to 50 ppm)
n 2840: 1 to 1,000μS (1MΩ to 1KΩ)
(0.5 to 500 ppm)
n 2841:10 to 10,000μS (5 to 5,000 ppm)
n 2842: 100 to 200,000μS (50
to 100,000 ppm)
ACCURACY:
±2% of cell constant value (standard). Cell
constants can be traceable to NIST and certified
to within ±1% of value (contact factory)
FEATURES
n Dual-threaded
n Compact electrode
n Triple orifice flowthrough design
n 316SS electrodes with injection molded
PEEK™ process connections and insulators
n Cell constants may be traceable to NIST
APPLICATIONS
n Water Treatment & Water Quality Monitoring
n Reverse Osmosis
n Deionization
n Cooling tower and Boiler Protection
n Distillation
n Desalination
n Demineralizer
n Semiconductor
n Aquatic Animal Life Support Systems
Item # Cell Constant (cm-1) Thread Size Part No. Price
3-2839-1 0.01 3/4 inch NPT 159 000 921 $253.10
3-2839-1D 0.01 ISO 7/1-R 3/4 159 000 923 253.10
3-2840-1 0.10 3/4 inch NPT 159 000 786 253.10
3-2840-1D 0.10 ISO 7/1-R 3/4 159 000 788 253.10
3-2841-1 1.00 3/4 inch NPT 159 000 790 253.10
3-2841-1D 1.00 ISO 7/1-R 3/4 159 000 792 253.10
3-2842-1 10.00 3/4 inch NPT 159 000 794 350.64
3-2842-1D 10.00 ISO 7/1-R 3/4 159 000 796 350.64
2839-1
2840-1 2841-1
2842-1
As Low As
$
699 80
3719-2X
shown with
Twist-Lock
Electrodes
Wet-Tap
Electrode
(sold separately)
Submersible Installation – Compatibility: with the Signet 8850, 8860 or 9900 with 3-9900.394 Direct Conductivity/Resistivity Mod., and 2839-2842 Electrode.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 24
24_24 3/30/14 9:13 AM Page 24
Flowmeters and Process Controls
8059 External Relay Modules
Signet 8059 External Relay Modules supplement the output capabilities of certain host instruments
such as the Signet Multi-Parameter Controllers. AC-powered versions accept universal
line voltage, and also provide 24 VDC output that can be used to power the host instrument or
other device(s). The host instrument controls relay operation by way of a single digital (S3L)
connection. The compact plastic housing is DIN rail mountable and includes LED annunciators
for each relay, plus one each for power on and data transfer or test mode.
Quick Spec
n Universal AC input/Full range
n Protections: Short
circuit/Overload/Overvoltage
n Cooling by free air convection
n Install on DIN rail TS-35/7.5 or 15
n NEC class 2 / LPS compliant
n Built in DC OK active signal
n LED indicator for power on
n No load power consumption < 1W for
7310-7024 and < 0.75W for others
n 100% full load burn-in test
Quick Spec
n External relays controlled by host instrument
n AC and DC powered versions
n DC power output (AC versions)
n DC power pass-through (DC versions) to simplify wiring
n Digital (S3L) pass-through to simplify sensor wiring
n Red LED annunciators for each relay
n Green LED indicators for power and digital (S3L)
data transfer
n Relay can be tested locally, and also via the host instrument
Signet i-Go™ 8058 Signal Converter
If connecting an 8058-2 to a 9900Transmitter,
use Channel 1 only.
FEATURES
n Connects with level, temperature, pressure
and multiparameter Signet instruments
and other manufacturers’ transmitters
n Up to two 4 to 20mA sensor inputs
n Connects additional measurement parameters
to Signet 8900 Multi-Parameter
instrument
n Wire or DIN rail mountable
APPLICATIONS
n Dissolved Oxygen
Monitoring and Control
in Wastewater
n Chlorine Dioxide for
Disinfection
n Specific Ion
n BOD
n TOC
n Alkalinity
n Ozone Monitoring
n Toroidal conductivity
n Chlorine Injection Control
n Tank Level Monitoring
n Turbidity and Suspended
Solids Monitoring
Item # Description Price
4-20mA output converted to a digital (S³L) output
3-8058-1 Single input wire-mount converter w/cable use with 8900 $239.16
3-8058-2 Two input DIN rail mount converter less cable, use with 8900 359.73
Accessories & Replacement Parts
5523-0222 Cable (per foot), 2 cond. w/shield, 22AWG 4.25
5523-0322 Sensor Cable (per foot) 3 cond. w/shield, 22AWG 4.00
Item # Description* or with the 8058 Price
3-8059-4 $234.00
3-8059-4AC 346.00
Accessories & Replacement Parts
3-8050.396 RC Filter Kit For Relay (2 per kit) 23.00
6205-0002* DIN Rail 1m length 26.00
6205-0003* End Clip DIN Rail 7.00
www.fwwebb.com/plastics
Signet 7310 Switching
Power Supplies provide
regulated output voltage
in compact and lightweight
plastic housings for DIN
Rail mounting. The series
includes five different output capacities from 0.42A to 4A (10W to 96W), all
of which accept universal AC line voltage input and meet worldwide standards
for performance and safety. These units meet the power requirements
for a single system, multiple Signet instruments or other devices requiring
24 VDC operation.
Any transmitter or other device with 4 to 20 mA output. All sold separately.
The Signet i-Go™ 8058 Signal Converter
accepts any 4 to 20 mA signal and converts
it into the Signet digital (S3L) format,
the serial data format used by the
Signet 8350, 8450, 8900 and 9900
instruments. When used with the 8900
Multi-Parameter Controller or the 9900
Transmitter, the measurement type and
3-8058-1 Wire Mount
operating range are defined in the setup menu. When used with
level, temperature and pressure ProcessPro transmitters, the
8058 is configured at the factory to the user’s specifications.
Face View (3-8059-4 shown)
 Item # Description Price
7310-1024 Power Supply, 24 VDC, 10W, 0.42A $105.00
7310-2024 Power Supply, 24 VDC, 24W, 1.0A 142.00
7310-4024 Power Supply, 24 VDC, 40W, 1.7A 165.00
7310-6024 Power Supply, 24 VDC, 60W, 2.5A 249.00
7310-7024 Power Supply, 24 VDC, 96W, 4.0A 319.00
Accessories & Replacement Parts
6205-0002 DIN Rail 1m length 26.00
6205-0003 End Clip DIN Rail 7.00
All sold separately.
From Only
$
23400
Signet 7310 Switching Power Supplies
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 25
25_25 3/30/14 9:18 AM Page 25
Flowmeters and Process Controls
PD6300 Pulse Rate/Totalizer
n Pulse, Open Collector, NPN, PNP, TTL, Switch Contact,
Sine Wave (Coil), Square Wave Inputs
n 5, 10 or 24 VDC Flowmeter Power Supply
n Gate Function for Rate Display of Slow Pulse Rates
n K-Factor, Internal Scaling, or External Calibration
PD6200 Analog Rate/Totalizer
n 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V Inputs
n Isolated 24 VDC @ 200 mA Transmitter Power Supply
n Open Channel Flow with Programmable Exponent
n Square Root Extraction
n 32-Point Linearization
COMMON METER FEATURES
n NEMA 4X, IP65 Front
n Universal 85-265 VAC or 12/24 VDC Input Power
n Large Dual-Line 6-Digit Display, 0.60" & 0.46"
n Programmable Displays & Function Keys
n Sunlight Readable Display
n 2 or 4 Relays + Isolated 4-20 mA Output Options
n External 4-Relay & Digital I/O Expansion Modules
n RS-232, RS-422/485 Serial Communication Options
n -40 to 65°C Operating Temperature Range
COMMON RATE/TOTALIZER FEATURES
n Display Rate & Total at the Same Time
n Rate in Units per Second, Minute, Hour, or Day
n Total, Grand Total or Non-Resettable Grand Total
n Password Protection for Total Reset
n 9-Digit Totalizer with Total Overflow Feature
n Total Stored in Non-Volatile Memory
n Any Relay for Rate or Total
n 4-20 mA Output for Rate or Total
n Sampling Relay
Perfect for flow applications. The PD6200 and PD6300
ProVu meters are 1/8 DIN flow rate/totalizers specifically
designed for displaying flow rate and total from flowmeters
with analog or pulse outputs. They are particularly well-suited
for flow applications because they can display flow rate
and total at the same time, provide power to drive the
flowmeter, and display flow total, flow grand total, or nonresettable
flow total on up to nine digits.
From Only
$
376 40
Starting At
$
376 40
PD6000 Process Meter
n Large Dual-Line 6-Digit Display
n 2 or 4 Relays & 4-20 mA Output
n 200 mA Transmitter Power Supply
n Multi-Pump Alternation Control
n Operates from -40 to 65°C
n Output Expansion Modules
n 32-Point Linearization and Math Functions
n Functions Keys
Starting At
$
34172
The Vision Turbine Meters are Bisphenol A (BPA)-free meters
that comply with the lead-free provision of the Safe Drinking
Water Act. The meters are designed for flow measurement of
low-viscosity and non-aggressive liquids, including demineralized
water, alkaline solutions, oils, salad oil, fuel/fuel consumption,
beverages, water solutions and coolants.
FEATURES
n Measurement in any meter orientation
n Operating pressure up to 362.50 psi (25 bar)
n Temperature range of – 4…212° F (–20…100° C)
n Accuracy of ± 3%
n Resolution up to 70,000 ppg (18,500 ppl), depending on model
APPLICATIONS
n Food Industry
n Medical Applications
n Chemical and Pharma Industry
n Industrial Applications
n Automotive
 Item # Flow Range Price
BV1000 0.026 to 0.65 gpm (0.1 to 2.5 lpm) $144.23
BV2000 0.13 to 9.2 gpm (0.5 to 35 lpm) 176.46
PD6801 ProtEX-F&I Loop-Powered Level Meter
Quick Spec
n Display Level in Feet & Inches
n 4-20 mA Input Loop-Powered
n Programmable 1/8 or 1/16 Inch Display
n 20-Segment Tank Level Indicator
n Lower Display for Tag, Volume, or Percent
n Open Collector Alarm Output
n SafeTouch® Through-Glass Button Programming
n Loop-Powered or External DC-Powered Backlight
Standard
n Explosion-Proof, IP68, NEMA 4X Enclosure
n Operates from -40 to 75°C
The PD6801 features a clearly labeled feet and
inches display, providing quick and easy to comprehend
information to operators. The meter can
display in eighths or sixteenths of an inch. It
includes a volume scale display feature and can
be seen under varied lighting conditions, from
wide angles, and from a distance.
Ordering Information
Item # Description Price
Level Meter
PD6801-0K1-0 ProtEX-F&I Meter with Backlight $936.46
& Open Collector Output
Accessories
PDA0001 3
⁄4" M-NPT to F-M20 Reducer 26.04
PDA0002 3
⁄4" M-NPT to 1
⁄2" F-NPT Reducer 26.04
PDA6846 Pipe mounting kit; includes zinc-plated u-bolt 10.47
for 2" pipe, (2) washers, and (2) nuts.
PDA6846-SS Pipe mounting kit; includes stainless steel 20.84
u-bolt for 2" pipe, (2) washers, and (2) nuts.
Vision Turbine Meter
MODELS BV1000 AND BV2000 FOR LOW
VISCOSITY AND NON-AGGRESSIVE LIQUIDS
NEW
NEW Mounting Dimensions:
Webb Price
$
936 46
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 26
26_26 3/30/14 9:26 AM Page 26
Pressure Item # Price
30" HG VAC K1 7M0242F20/V $363.36
15psi K1 7M0242F2 15# 363.36
30psi K1 7M0242F2 30# 363.36
60psi K1 7M0242F2 60# 363.36
100psi K1 7M0242F2 100# 363.36
150psi K1 7M0242F2 150# 363.36
200psi K1 7M0242F2 200# 363.36
300psi K1 7M0242F2 300# 363.36
500psi K1 7M0242F2 500# 363.36
Pressure Item # Price
30psi/VAC T2 M0242F2 30#/VAC $273.85
30psi T2 M0242F2 30# 273.85
60psi T2 M0242F2 60# 273.85
100psi T2 M0242F2 100# 273.85
150psi T2 M0242F2 150# 273.85
200psi T2 M0242F2 200# 273.85
300psi T2 M0242F2 300# 273.85
500psi T2 M0242F2 500# 273.85
750psi T2 M0242F2 750# 273.85
1000psi T2 M0242F2 1000# 273.85
 Pressure Nema 4X Enclosure Price Nema 7/9 Enclosure Price
 30" H2
0 D D424B 30" H2
0 psid $387.87 D724B 30" H2
0 psid $608.44
 15psid D424B 15psid 432.63 D724B 15psid 654.26
 30psid D424B 30psid 432.63 D724B 30psid 654.26
 60psid D424B 60psid 432.63 D724B 60psid 654.26
 100psid D424B 100psid 432.63 D724B 100psid 654.26
 160psid D424B 160psid 432.63 D724B 160psid 654.26
 200psid D424B 200psid 432.63 D724B 200psid 654.26
 400psid D424B 400psid 432.63 D724B 400psid 654.26
 600psid D424B 600psid 432.63 D724B 600psid 654.26
 Pressure Nema 4X Enclosure Price Nema 7/9 Enclosure Price
30" HG VAC B424B 30" HG/V $207.79 B724B 30" HG/V $426.23
 30" H2
0 B424B 30" H2
0 221.64 B724B 30" H2
0 440.08
 15psi B424B 15# 182.21 B724B 15# 400.66
 30psi B424B 30# 182.21 B724B 30# 400.66
 60psi B424B 60# 182.21 B724B 60# 400.66
 100psi B424B 100# 182.21 B724B 100# 400.66
 160psi B424B 160# 182.21 B724B 160# 400.66
 200psi B424B 200# 182.21 B724B 200# 400.66
 400psi B424B 400# 182.21 B724B 400# 400.66
 600psi B424B 600# 182.21 B724B 600# 400.66
Quick Spec
n OUTPUT: 4-20 mA (voltage available)
n ENCLOSURE: Stainless steel Nema 4X
n SENSOR: 17-4 Stainless steel
n CONNECTION: 1
⁄4" NPT Male stainless steel
n ACCURACY: +/- 1% (B.F.S.C.)
n With 36" shielded cable with PVC jacket
Quick Spec
n OUTPUT: 4-20 mA (voltage available)
n ENCLOSURE: Glass reinforced nylon
n SENSOR: 17-4 PH stainless steel
n CONNECTION: 1
⁄4" NPT male stainless steel
n ACCURACY: 1% total error band
n With 36" shielded cable with PVC jacket
Quick Spec
n ENCLOSURE: Nema 4X weatherproof or
Nema 7/9 IP66 explosion proof
n 15 AMP 125/250/480 VAC micro switch
n CONNECTION: 316 Stainless steel 1
⁄4" NPT female
n Buna N Diaphragm (other materials available)
Quick Spec
n ENCLOSURE: Nema 4X weatherproof or
Nema 7/9 IP66 explosion proof
n 15 AMP 125/250/480 VAC micro switch
n CONNECTION: 316 Stainless steel 1
⁄4" NPT female
n Buna N diaphragm (other materials available)
K1 Pressure Transducer
B Series Differential Pressure Switch B Series Pressure Switch
Flowmeters and Process Controls
T2 Pressure Transducer
RANGES Item # Conductivity TDS pH TC - 25°C/77°F Price
 TP1 0 - 9999 S
0 - 9999 ppm — 32 to 160?F $687.94
 TPH1 0 - 9999 S
0 - 9999 ppm 0 - 14 32 to 160?F 964.07
ACCURACY Item # Conductivity/TDS pH Temperature Reading
 TP1 ±1% of reading — ±0.1°C/F
 TPH1 ±1% of reading ±0.02 pH ±0.1°C/F
RPG Replacement pH Sensor 156.88
TH1 pH/Temperature Sensor 444.14
Quick Spec
n pH sensor well capacity: 1,2 ml/0.04 oz.
n Power: 9V alkaline battery
n Battery life: >100 hours (5000 readings)
n Operating/storage temp: 0 - 55°C/32 - 132°F
n Protection ratings: IP67/NEMA 6 WATERPROOF
TechPro II™ - Conductivity, TDS, pH and Temperature
MEASUREMENTS YOU CAN COUNT ON
Obtain reliable and accurate measurements of your water source
with the value-priced TechPro II™
. Ideal for water treatment testing as well as other industrial
and commercial applications, these instruments reflect Myron L’s 40-plus years experience
designing and building quality conductivity, TDS and pH measuring instrumentation. CE
FEATURES:
n Waterproof & Buoyant
n Keypad Calibration
n Long Life Internal Electrodes
n Auto Temperature
Compensation to 25°C/77°F
n Full 4 Digit Display
IP67/NEMA6
TP1
TH1
Parameters
TPH1
Ultrameter II™
PoolPro™
Item # PS6FCE Price: $1,073.25
Conductivity, Resistivity,
Temp, TDS, pH, ORP
CE
Other Digital Handheld/Portable Instruments Available:
Digital Dialysate Meter™ – Conductivity, Resistivity, TDS, pH, ORP/Free Chlorine, Temperature
All welded
pressure construction.
Advanced Design, Waterproof & Bouyant.
Conductivity, Mineral/Salt, TDS, pH, ORP/Free
Chlorine, Temperature, Hardness and LSI Calculator
Call for Calibration Solution
POCKET
TESTER
PEN
Item # Description Price
6PIIFCE Conductivity/Resistivity/TDS/pH/ORP/Free Chlorine/Temp. $1,073.25
4PII Conductivity/TDS/Resistivity/Temp. 792.50
PT1 Pocket Tester Pen: Conductivity/TDS/Salinity/Temp. 179.00
PT2 Pocket Tester Pen: pH/Temp. 165.87
PT3 Pocket Tester Pen: ORP/Temp. 179.16
PT4 Pocket Tester Pen: Chlorine/Temp. 179.13
U2CIP uDock™ Accessory Package: uDock™, USB cable, 212.13
Macintosh/PC application software for downloading data
RPR Replacement pH/ORP Sensor for Ultrameters 182.32
User replaceable, features a unique/porous liquid-junction
UPP Hard Protective Case (Small) 67.84
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 27
27_27 3/30/14 9:29 AM Page
Chart Recorders
Inputs
Input Types/Range Type Range
Thermocouple J 0°F to 1400°F
K 0°F to 2500°F
T -330°F to 750°F
R 400°F to 3000°F
S 400°F to 3000°F
RTD 100 ohm Platinum -220°F to 750°F
.00385 ohms/ohm/°C
Current DC 0 to 20 mA, 4 to 20 mA
RTD Excitation Current 150 microamps, typical
Relays SPDT, contacts rated 5 amps resistive at 115 VAC, 2.5 amps resistive at
230 VAC, 1
⁄8 HP at 230 VAC (single phase), 250 VA at 115/230
Recording
Pen Color Pen 1 – Red, Pen 2 – Green
Chart Size 10 inch
Chart Rotation User configurable: 8 hours, 12 hours, 24 hours, 48 hours, or 7 days
Number Up to two process alarms for each of two inputs
Type Process High or low
Limit Device Optional high/low limits for each input with latching output. Normally open
output latches open. Red reset button included to the right of the display
Hysteresis Fully adjustable, 0 to 200 units, single sided
The pens (up to two available), each with configurable spans, are positioned smoothly without any
slidewire feedback, simplifying the design and improving reliability. The 10" chart rotates at user
selectable speeds. Up to 2 Process Alarms or limit Alarms are optional for each pen, with both normally
open and normally closed contacts available. Alarms can be high or Low process or high or
low limit (latching with manual reset). FM approval for the high/low limit function will be available.
 Item # Description Price
 51000011 Single Pen Recorder only (90-264 VAC) $1,153.22
 51100011 Two Pen Recorder only (90-264 VAC) 1,437.62
 51020011 Single Pen Recorder w/2 Alarm relay per pen (90-264 VAC) 1,713.68
 51122011 Two Pen Recorder w/2 Alarm relays per pen (90-264 VAC) 1,897.68
Many more configurations available. Please consult sales office.
CHART PAPER FOR MRC5000
 Item # Description Price
 00214417 10" Chart Paper, 24 Hr. 0-14 pH, Box of 100 $34.79
 00214416 10" Chart Paper, 7 Day 0-14 pH, Box of 100 34.79
Call for other options: GPM. Temp, Variations.
MRC 5000 1 & 2 Pen Circular Chart Recorder
ISO 9002 Certified
Two Year
Warranty
Two Year
Warranty
MRC 5000 SPECIFICATIONS
DR 4300 Circular Chart Recorders
DIGITAL RECORDING
Design simplicity makes operation a snap, even for inexperienced
operators. Accepts thermocouple tpes J,K,R,S and
T 100ohm DIN RTD and the following linear actuations;
0-20mA,4-20mA,0-20mV, 0-50mV,0-5VDC and 1-5VDC
Item # Description Price
DR4311G0E0 10" Recorder W/Display,1-Input,0-Output,0-Totalizer,25 Charts $1,468.38
 Additional Pen 546.00
 Alarms to add (2) First Pen 193.85
 Alarms to add (2) Second Pen 193.85
 Add Control Output No/Output,No/Totalizer,Box 533.07
 Addition Control Output 533.07
24001660-001 10" Circular Chart Paper 24 Hour/ 0/100 Box of 25 (Call for options) 37.46
Item # Description Price
DR45AT1E0 12" Recorder W/Display,1-Input,0-Output,0-Totalizer,25 Charts $2,399.90
 Additional Pen 546.00
 Alarms to add (2) First Pen 274.62
 Add Control Output 710.78
 Addition Control Output 710.78
30755317-001 12" Circular Truline® Chart Paper 24 Hour/ 0/100 Box of 25 70.22
Call for Other Options
Honeywell DR 4300 10" Chart Recorder
Honeywell DR 4500A 12" Truline® Chart Recorder
n Accuracy ±0.10% of span
n Up to 2 inputs
n Up to 4 alarm/control relays
n Fully user configurable
n Digital PV display
n Up to 2 control loops – full PID control
n Totalization and timers
n Optional 24 volt power supply
n Optional MODBUS communications
Also available without display. FEATURES
Vast amount of options available - CALL!
n 0.05% accuracy full scale on a wide choice
of inputs and ranges.
n Each input span is adjustable within the
selected range, with up to 2 ranges per input.
n Universal (T/C, RTD, mV, mA, V), or linear
input board (mV, mA, V).
n Fast scanning of inputs (20/sec.)
n Roll or fan fold chart capability using the
same cassette. Fully documented chart with
trace color assignment, thin or thick trace,
alarm in red tagging, zooming, zoning,
trend, tabular, messages.
n Channel groups available.
n Advanced math package
n Full configurability through the front keys,
front PC jack or communication link.
n Firmware upgradable by PC (Flash memory).
n Input calibration traceability per channel,
or per group of channels.
n Configurable Periodic chart documentation.
n Universal power supply : 100 to 240 Vac/dc.
n Up to 8 retransmitted signals.
n Universal communication:
ASCII in RS232, 422/485.
MODBUS RTU in RS422/485.
ETHERNET/MODBUS RTU Interface.
n Metal door/case, IP55 protection.
Part # Description Price
DP180OBR1000 Single Input 180 Chart Recorder Universal Input, Roll Type $2,519.00
46187999-100 Strip Chart Paper 7 35.89
DP180OBR1000 Single Input 250 Chart Recorder Universal Input, Roll Type 2,791.00
46187999-100 Strip Chart Paper 7 35.89
Dpr250 Digital Strip
Chart Recorder
250mm (10”inch) wide chart recorder The
recorder is able to monitor up to 64 analogue
inputs or any combination of analogue inputs,
digital inputs and outputs that total up to 80.
Dpr180 Digital Strip
Chart Recorder
180mm (7 inch)
wide chart recorder.
The recorder is able to monitor up to 24
analogue inputs and up to 36 digital inputs.
MAIN FEATURES
NEW
Trend Printing Mode
Tabular Printing Mode
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 28
28_28 3/30/14 9:30 AM Page 28
Valves
Cartridge Ball Valve With True Union Ends Type 546
PVC & CPVC True Union 2000 Standard Ball Valves
 Body 3
⁄8" 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
 Material Item # Price Item # Price Item # Price Item # Price Item # Price Item Price Item Price
PVC Teflon Seats, EPDM Seal Material
 161546341 $26.59 161546342 $26.59 161546343 $32.07 161546344 $38.99 161546345 $49.91 161546346 $64.14 161546347 $80.89
PVC Teflon Seats, Viton Seal Material
 161546351 32.07 161546352 32.82 161546353 38.34 161546354 48.40 161546355 59.33 161546356 75.87 161546357 102.79
CPVC Teflon Seats, EPDM Seal Material
 163546341 46.14 163546342 46.86 163546343 52.51 163546344 63.19 163546345 86.59 163546346 100.81 163546347 128.49
CPVC Teflon Seats, Viton Seal Material
 163546351 51.61 163546352 52.33 163546353 58.66 163546354 72.59 163546355 95.99 163546356 112.53 163546357 150.37
Quick Spec
n EPDM and FPM seals and PTFE ball seats standard
n 232 psi rating for PVC, CPVC, PROGEF Standard, PVDF socket
n ASTM 1970-01 compliant end connections
n Union nuts with strong buttress threads
n Seat carrier with fine pitched thread for precise adjustment
n Can be actuated after installation
Quick Spec
n Sizes 1
⁄2" - 2" pressure rated to 235 psi for water @ 73°F
n Sizes 21
⁄2" - 4" pressure rated to 150 psi for water @ 73°F
n Flanged pressure rated to 150 psi for water @ 73°F
n Maximum service temperature PVC = 140°F, CPVC = 200°F
n Pressure deratings apply
n Replaceable Teflon HDPE floating seat design
The Type 546 Ball Valve, successor to the proven Type 346
Ball Valve, is the next generation in an established family of
products behind which stand George Fischer’s 40 years of
experience in plastic piping systems.
Change for the better!
PVC – Socket & Threaded Ends
 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 EPDM 3629-005 $17.38 3629-007 $20.55 3629-010 $24.79 3629-012 $33.88 3629-015 $40.82 3629-020 $53.94
 Viton® 3639-005 19.33 3639-007 22.87 3639-010 27.43 3639-012 43.24 3639-015 45.30 3639-020 59.30
CPVC – Socket & Threaded Ends
 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 EPDM 3629-005C $22.94 3629-007C $26.80 3629-010C $33.10 3629-012C $50.07 3629-015C $53.31 3629-020C $76.66
 Viton® 3639-005C 25.51 3639-007C 31.20 3639-010C 37.32 3639-012C 56.69 3639-015C 58.90 3639-020C 88.75
From Only
$
26 59
FEATURES – PVC & CPVC
Economical, low profile quarter turn shutoff valve is excellent for general purpose and many OEM applications. PVC and CPVC
valves are available in IPS sizes 1
⁄2" through 4" with socket, SR thread (Stainless Steel Reinforced), or flanged end connectors.
Visit fwwebb.com/plastics to see the Light Duty Version, Type 375
3-Way Ball Valve Type 543 visit fwwebb.com/plastics
Available up
to 4 inches
Available up
to 4 inches
See page 37 for Manual Valves
 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Fail-safe close – Diastar 10 Plus
 EPDM 161684612 $348.23 161684613 $362.30 161684614 $386.92 161684615 $488.94 161684616 $608.51 161684617 $742.17
 PTFE 161684632 440.85 161684633 434.29 161684634 495.95 161684635 622.58 161684636 779.69 161684637 954.38
Fail-safe close – Diastar 10
 EPDM 161624612 191.92 161624613 200.21 161624614 213.56 161624615 269.39 161624616 335.75 161624617 408.27
 PTFE 161624632 242.64 161624633 256.13 161624634 273.57 161624635 343.37 161624636 429.90 161624637 526.21
Fail-safe open
 EPDM 161644612 202.83 161644613 216.91 161644614 228.63 161644615 287.26 161644616 361.12 161644617 439.68
 PTFE 161644632 272.02 161644633 291.95 161644634 311.88 161644635 389.26 161644636 490.09 161644637 589.75
Double acting
 EPDM 161654612 202.83 161654613 216.91 161654614 228.63 161654615 287.26 161654616 361.12 161654617 439.68
 PTFE 161654632 272.02 161654633 291.95 161654634 311.88 161654635 389.26 161654636 490.09 161654637 589.75
The Diastar 10 and 10 Plus valves from GF Piping
Systems incorporate several innovative features. The
valve has Cv values that average at least double the
conventional design. This high-flow design allows the
valve to be used where diaphragm valves were previously
not possible due to flow restriction. In addition,
the new design eliminates the four bolts used to hold
the valve together, which eliminates a corrosive weak
point. The valve is available in PVC, CPVC, PP, PP-n,
and PVDF. A modular design allows easy field installation
of an actuator to a manual valve as well as
other accessories such as position feedback switches.
PVC Body with Socket Connections
Pre-loaded compression springs: safety, Actuator housing of PP-GF: very low weight, Very compact design: Compact systems
STANDARD FEATURES
n Size ½–2" (larger sizes available in
025 series)
n Valve assembly Threaded connection
without bolts
n Lower body (wetted) PVC, CPVC, PP,
Natural PP, PVDF, ABS
n Actuator body Glass-filled polypropylene
n Diaphragm material (wetted) EPDM, FPM,
PTFE with FPM backing, PTFE with EPDM
backing, NBR
n Pressure Diastar 10 & 10 Plus: 150 PSI
(some configurations have a reduced
pressure rating on one side, see catalog)
n Lockable handle
OPTIONAL FEATURES
n Electro pneumatic positioner
n Electric feedback switches
n Manual override
+GF+ DIASTAR 10 & DIASTAR 10 Plus High Flow
Light
Duty!!
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 29
29_29 3/30/14 9:33 AM Page 29
Quick Spec
n Safe Block design
n Fully serviceable. Internals can be
inspected and serviced
n Fine pitch threaded seal retainer to
adjust for seat wear
n Reversible Teflon seats. Doubles the life
of the seating material
n Full Port design for greater Cv values
Hayward QIC, (Quality-InnovativeCompact)
Ball Valves are used in process
piping systems when low cost and compact
design are required. They provide
reliable quarter turn shut off.
Hayward Safe Block Valves are made from NSF approved material and are available in PVC, CPVC and PPL.
User friendly: Operating Dry-Mate is simple. The handles interlock making it easy to identity
which handle opens or closes first. No guessing involved! The two Dry-Mate halves couple
together with cam levers for positive engagement. Design: The Banjo Dry-Mate is designed
for safe and easy spill free connections. The “double ball” design allows maximumflow, while
the cam lever style of connection is the most recognized fluid connector.
Polypropylene Dry Disconnect
 Item # Description Max. PSI Pipe Size Opening Thru Ball Price
 DM150A 11
⁄2" Male Dry-Mate 100 11
⁄2" 11
⁄2" $122.17
 DM150D 11
⁄2" Female Dry-Mate 100 11
⁄2" 11
⁄2" 130.57
 DM200A 2" Male Dry-Mate 100 2" 11
⁄2" 122.15
 DM200D 2" Female Dry-Mate 100 2" 11
⁄2" 130.57
 DM20200A Repair Kit for Male Fits 11
⁄2" & 2" 63.19
 DM20200D Repair Kit for Female Fits 11
⁄2" & 2" 63.19
 DM200CAP Dust Cap for Male Fits 11
⁄2" & 2" 33.46
 DM200PL Dust Plug for Female Fits 11
⁄2" & 2" 33.46
Quick Spec
n Rugged and compact
n Factory set threaded seal retainer provides
low running and seating torque
n High in quality, low in cost
n Maximum flow with low pressure loss
n NSF Approved
Valves
REMOTE CONTROL VALVES
Hayward True Union Ball Valves, designed
for actuator mounting, are ideal for reliable
remote control of process fluids in a piping
system. They enable all Hayward actuators
and accessories to be mounted quickly with
accurate alignment
and proper
support.
TB Series True Union Ball Valve for Actuator Mounting
1
⁄4" to 6" – PVC, PPL and Corzan® CPVC
PVC/Viton® PVC/EPDM CPVC Corzan®/Viton® CPVC Corzan™
/EPDM
Size Item # Price Item# Price Item# Price Item # Price
1
⁄2" SKT/THD HCTB1050STACTV $79.84 HCTB1050STACTE $78.32 HCTB2050STACTV $109.95 HCTB2050STACTE $108.45 3
⁄4" SKT/THD HCTB1075STACTV 87.83 HCTB1075STACTE 85.84 HCTB2075STACTV 118.98 HCTB2075STACTE 114.46
1" SKT/THD HCTB1100STACTV 104.38 HCTB1100STACTE 102.43 HCTB2100STACTV 146.11 HCTB2100STACTE 143.10
11
⁄4" SKT/THD HCTB1125STACTV 122.00 HCTB1125STACTE 118.98 HCTB2125STACTV 170.22 HCTB2125STACTE 167.18
11
⁄2" SKT/THD HCTB1150STACTV 122.00 HCTB1150STACTE 118.98 HCTB2150STACTV 170.22 HCTB2150STACTE 167.18
2" SKT/THD HCTB1200STACTV 158.16 HCTB1200STACTE 153.63 HCTB2200STACTV 219.91 HCTB2200STACTE 213.88
21
⁄2" Threaded HCTB1250TACTV 387.56 HCTB1250TACTE 373.56 HCTB2250TACTV 554.29 HCTB2250TACTE 542.25
21
⁄2" Socket HCTB1250SACTV 387.56 HCTB1250SACTE 373.56 HCTB2250SACTV 554.29 HCTB2250SACTE 542.25
3" Threaded HCTB1300TACTV 387.56 HCTB1300TACTE 373.56 HCTB2300TACTV 554.29 HCTB2300TACTE 542.25
3" Socket HCTB1300SACTV 387.56 HCTB1300SACTE 373.56 HCTB2300SACTV 554.29 HCTB2300SACTE 542.25
4" Threaded HCTB1400TACTV 528.68 HCTB1400TACTE 513.63 HCTB2400TACTV 763.64 HCTB2400TACTE 748.60
4" Socket HCTB1400SACTV 528.68 HCTB1400SACTE 513.63 HCTB2400SACTV 763.64 HCTB2400SACTE 748.60
 Size Socket Thread
 ½ AV1T050SE $11.76 AV1T050TE $11.76
 ¾ AV1T075SE 15.12 AV1T075TE 15.12
 1 AV1T100SE 17.89 AV1T050TE 17.89
 1¼ AV1T125SE 31.59 AV1T125TE 31.59
 1½ AV1T150SE 31.59 AV1T150TE 31.59
 2 AV1T050SE 41.76 AV1T075TE 41.76
PVC EPDM O-Ring with PTFE Seat
TB Series Safe Block™ True Union Ball Valve PVC, CPVC or GLPP
 Size PVC CPVC GFPP
 ½ TB1050(ST)E $57.25 TB2050(ST)E $84.50 TB4P050(T)E $90.65
 ¾ TB1075(ST)E 70.65 TB2075(ST)E 106.40 TB4P075(T)E 110.40
 1 TB1100(ST)E 81.70 TB2100(ST)E 129.10 TB4P100(T)E 135.40
 1¼ TB1125(ST)E 108.40 TB2125(ST)E 179.80 TB4P125(T)E 190.75
 1½ B TB1150(ST)E 136.60 B TB2150(ST)E 214.20 TB4P150(T)E 224.70
 2 TB1200(ST)E 179.01 TB2200(ST)E 295.45 TB4P200(T)E 299.85
 4 TB1400(T)E 261.90 TB2400(T)E 1474.35
EPDM Seals, with (ST) Socket/Thread End or (S) Socket, (T) Thread, Same Price
Option Call For Price: (F) Flange Call, For FPM remove the E from part number
QV Series QIC2™ Compact Ball Valve
Double Ball
Design with
Cam Lever
Connection!
Prevents Accidental Spills
and Exposure!
Quick Spec
n Lightweight
n Unrestricted 11
⁄2"flow
n Minimal fluid spillage
n Easy to use
n Economical
n Reduces risk of exposure
n Wide range of chemical resistance
n Cannot be uncoupled in open position
n Swivel on female Dry-Mate®
Extended duty motor standard with all
Proportional Control and 12/24 VDC options. Quick Spec
n Operation: Reversing
n Conduit Size: 1
⁄2"
n Cycle Times: 8 to 46 seconds, depending on model
n Enclosure: NEMA 4X
n Base: Epoxy-Coated Aluminum
Thermal Overload Protection – Mechanical Brake
n Override: Clutchless manual
n Housing: Aluminum alloy dry powder coated
For Ball and Butterfly
Valves up to 24"
EPM Series On/Off and Proportional Control Actuators
n Four Limit Switches (2 Auxiliary)
n Internal Low Power Heater
n NEMA 4/4X Enclosure
n Position Indicator
n Self-Locking Drive
n Permanently Lubricated
n CE and CSA Approved
n ISO 5211 Mounting Base
FEATURES
 Basic Unit Actuator Price Actuator Price
 1½ - 3" EPM3 $636.17 EPM4 $957.72
 4" EPM4 957.72 EPM6 1,469.37
 6" EPM6 1,470.03 EPM8 1,660.79
 8" EPM11 1,684.45 EPM13 2,227.75
 10 - 12" EPM22 2,304.51 EPM35 2,579.63
Options Voltage 12VAC, 12VDC,230VAC,24VAC. Call for Price
Additional Options: Cold Weather Pkg, Extended Duty Motor, 4-20m
feedback pkg., Hand wheel manual override, Proportional Control,
Relay Open or Close, 2 Aux limit Switch, Heater only, Timer Only.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 30
30_30 3/30/14 9:34 AM Page 30
Type-21 Ball Valve
PVC T.U. Type-21 With EPDM O-Rings — 230 PSI
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 21
⁄2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Soc/Thd 1601005 $26.47 1601007 $32.19 1601010 $37.20 1601012 $49.36 1601015 $61.52 1601020 $81.56 1602025 $175.29 1602030 $179.88 1602040 $317.47
Flange 1604005 71.92 1604007 81.84 1604010 107.88 1604012 176.10 1604015 203.37 1604020 291.42 1604025 378.13 1604030 511.33 1604040 846.09
PVC T.U. Type-21 With Viton O-Rings — 230 PSI
Soc/Thd 1605005 29.34 1605007 35.05 1605010 42.21 1605012 55.81 1605015 68.68 1605020 90.14 1606025 206.38 1606030 211.98 1606040 359.25
Flange 1608005 84.32 1608007 91.75 1608010 121.52 1608012 199.65 1608015 215.76 1608020 302.58 1608025 452.99 1608030 569.06 1608040 917.22
CPVC T.U. Type-21 With EPDM O-Rings — 230 PSI
Soc/Thd 1609005 37.92 1609007 47.94 1609010 58.66 1609012 81.56 1609015 97.30 1609020 133.78 1610025 360.78 1610030 370.96 1610040 637.97
Flange 1612005 104.16 1612007 121.52 1612010 159.97 1612012 256.70 1612015 311.25 1612020 429.07 1612025 510.07 1612030 726.28 1612040 1,403.29
CPVC T.U. Type-21 With Viton O-Rings — 230 PSI
Soc/Thd 1613005 40.77 1613007 50.07 1613010 62.24 1613012 85.85 1613015 103.01 1613020 140.94 1614025 383.20 1614030 395.94 1614040 678.22
Flange 1616005 112.86 1616007 132.69 1616010 172.38 1616012 280.26 1616015 324.92 1616020 443.95 1616025 581.22 1616030 914.41 1616040 1,478.78
PP T.U. Type-21 With Viton O-Rings — 150 PSI
Thd* 1623005 55.81 1623007 70.68 1623010 83.10 1623012 120.29 1623015 138.89 1623020 189.74 1623025 371.57 1623030 483.89 1623040 804.91
Flange 1625005 114.09 1625007 135.18 1625010 172.38 1625012 323.66 1625015 447.63 1625020 447.63 1625025 579.34 1625030 806.77 1625040 1,184.90
PVDF T.U. Type-21 With Viton O-Rings — 230 PSI
Thd* 1627005 150.05 1627007 199.65 1627010 294.94 1627012 341.02 1627015 500.99 1627020 677.09 1627025 1,202.66 1627030 1,650.98 1627040 4,043.22
Flange 1629005 321.18 1629007 411.71 1629010 577.88 1629012 684.52 1629015 845.73 1629020 1,150.79 1629025 1,882.15 1629030 2,419.39 1629040 4,641.29
*Consult Sales Office for PP and PVDF Socket connections.
1
⁄2" -2" ball valves ship with threaded and socket ends, but please note that 3" & 4" sizes are threaded only. Also available CPVC, Natural PP & PVDF.
n Built-in spanner wrench handle for easy
disassembly or maintenance
n Panel mounting pad
n Double O-ring seals on stem
n Full vacuum rated
n PTFE seat and EPDM O-ring
n Blocks in two directions, upstream and
downstream, leaving full pressure on the
opposite end of the valve
n ISO mounting pad for both manual and
actuated operations
n Teflon seats with elastomeric backing cushions
ensure bubble-tight shut-off and a low
fixed torque, while at the same time compensating
for wear
n True Union design eliminates the need for
flanges and permits installation or repairs
without expanding the pipe system
Ideal for
Actuation!
Ideal for
Actuation!
SPECIFICATIONS *
Sizes: 1
⁄2"-4"**
Models: Socket, Threaded,
Flanged (ANSI), Butt
Bodies: PVC, CPVC, PP,
PVDF
Seats: Teflon backed with
EPDM or Viton
Seals: EPDM or Viton
OPTIONS
• Stem extensions
• 2" square nut
• Locking handle
• “T” nut
• Spring return handle
• Actuator operation:
see pages 34 and 35
PVC T.U. Ball Valves (socket and
threaded end connectors included)
Series MBV Trunnion
Ball Valve
Quick Spec
n Heavy-duty, large diameter shaft
eliminates stem breaks
n Dual shaft seals to eliminate leakage
n Teflon bearing on shaft
n Teflon seats backed up with O-rings
n True union ball design
n Full concentricity and mirror smooth ness
of ball assures leakproof operation
n Multi-directional flow
n True-union ends
Quick Spec
n NSF Listed for Potable Water
n PTFE Ball Seats
n EPDM or FKM O-ring Options
n Full Schedule 80 Bore
n 1
⁄2" - 2" valves pressure rated
to 235 psi at 73° F.
n 3" - 6" & all flanged valves
rated to 150 psi at 73° F.
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
Seal Material Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 EPDM MBV050EPT-PV $49.21 MBV075EPT-PV $55.78 MBV100EPT-PV $65.39 MBV125EPT-PV $116.93 MBV150EPT-PV $122.24 MBV200EPT-PV $139.45 MBV300EPT-PV $395.56 MBV400EPT-PV $544.02
 VITON MBV050VT-PV 58.04 MBV075VT-PV 26.14 MBV100VT-PV 74.40 MBV125VT-PV 118.17 MBV150VT-PV 130.19 MBV200VT-PV 152.25 MBV300VT-PV 426.69 MBV400VT-PV 568.72
Valves
Pressure Vs Temperature (PSI, Water, Non-Shock)
 PVC CPVC PP PVDF
 Nominal Size 30°F 71°F 106°F 121°F 30°F 71°F 106°F 121°F 141°F 176°F -5°F 86°F 121°F 141°F -5°F 71°F 106°F 141°F 176°F
 Inches mm 70°F 105°F 120°F 140°F 70°F 105°F 120°F 140°F 175°F 195°F 85°F 120°F 140°F 175°F 70°F 105°F 140°F 175°F 210°F
 1
⁄2-2 15-50 230 170 150 30 230 170 150 120 75 55 150 110 90 55 230 185 150 115 85
 21
⁄2 65 230 170 150 NA 230 170 150 120 75 55 150 95 70 40 230 185 150 115 85
 3 80 230 170 150 NA 230 170 150 85 55 40 150 95 70 40 230 185 150 100 70
 4-6 100-150 150 150 150 NA 150 150 150 85 55 40 150 95 70 40 150 150 150 100 70
Over 2" choice of Socket or Thread (same price) Socket shown
www.facebook.com/webbplastics
 PVC CPVC
 Size Socket Thread Flange Socket Thread Flange
 ½ 6622-005 6621-005 6623-005 6622-005C 6621-005C 6623-005C
 $12.81 $12.81 $25.72 $19.89 $19.89 $39.36
 ¾ 6622-007 6621-007 6623-007 6622-007C 6621-007C 6622-007C
 17.47 17.47 29.05 27.13 27.13 46.52
 1 6622-010 6621-010 6623-010 6622-010C 6621-010C 6622-010C
 19.07 19.07 37.86 29.61 29.61 61.22
 1¼ 6622-012 6621-012 6623-012 6622-012C 6621-012C 6622-012C
 28.69 28.69 47.27 44.55 44.55 77.01
 1½ 6622-015 6621-015 6623-015 6622-015C 6621-015C 6622-015C
 34.17 34.17 57.19 53.06 53.06 97.28
 2 6622-020 6621-020 6623-020 6622-020C 6621-020C 6622-020C
 45.62 45.62 76.31 62.84 62.84 135.55
Compact 2000 Ball Valve PVC & CPVC
This industrial grade, quarter turn shutoff valve is popular where maintenance-free
installations are desired for a variety of chemical processing,
industrial and OEM applications. IPS Sizes 1
⁄2" - 4" available with socket,
threaded or flanged end connectors, 6" size
available with socket or flanged end connectors.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 31
31_31 3/31/14 7:46 AM Page 31
Multiport® "3-way" Ball Valve
PVC Multiport® Valve with Viton O-Rings
CPVC Multiport® Valve with Viton O-Rings
Polypropylene Multiport® Valve with Viton O-Rings
PVC Omni® Ball Valve
CPVC Omni® Ball Valve
Omni® Ball Valve
OPTIONS (consult sales office for pricing)
n Stem Extensions
n 2" square nut
n “T” nut
n Locking handle
n Spring return handle
n EPDM O-rings
n Actuator operators available,
see pages 35 and 36
n “Tee” port, “Double-L” port
and Cross port
PVDF Multiport® Valve with Viton O-Rings
3
⁄8" 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 Threaded 1073003 $17.78 1073005 $17.78 1073007 $27.00 1073010 $32.91 1073012 $63.20 1073015 $63.20 1073020 $83.61 1073040 $277.81
 Socket 1072003 17.78 1072005 17.78 1072007 27.00 1072010 32.91 1072012 63.20 1072015 63.20 1072020 83.61 1072090 277.81
3
⁄8" 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 Threaded 1071003 $11.85 1071005 $11.85 1071007 $11.85 1071010 $15.14 1071012 $19.75 1071015 $25.68 1071020 $34.23 1071030 $157.34
 Socket 1070003 11.85 1070005 11.85 1070007 11.85 1070010 15.14 1070012 19.75 1070015 25.68 1070020 34.23 1070030 157.34
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 Threaded 2529005 $193.76 2529007 $232.00 2529010 $308.22 2529012 $567.83 2529015 $567.83 2529020 $712.55 2529030 $1,720.06 2529040 $1,991.06
 Flange 2531005 314.43 2531007 365.66 2531010 468.40 2531012 800.92 2531015 800.92 2531020 1,003.09 2531030 2,155.32 2531040 3,025.88
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Threaded 2533005 $275.95 2533007 $355.22 2533010 $471.55 2534012 $778.42 2533015 $779.26 2533020 $1,099.16 2534030 $3,633.71 2534040 $4,132.55
Flange 2535005 275.95 2535007 355.22 2535010 471.55 2536012 1,358.97 2535015 779.26 2535020 1,099.16 2536030 4,816.82 2536040 5,263.54
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 Socket 2519005 $100.53 2519007 $114.90 2519010 $160.29 2519012 $320.38 2519015 $277.28 2519020 $484.98 2519030 $869.42 2519040 $1,757.28
 Threaded 2520005 100.53 2520007 114.90 2520010 161.29 2520012 320.38 2520015 277.28 2520020 484.98 2520030 869.42 2520040 1,757.28
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 Socket 2513005 $85.07 2513007 $100.53 2513010 $131.46 2513012 $291.64 2513015 $239.73 2513020 $298.28 2513030 $692.66 2513040 $1,177.81
 Threaded 2514005 85.07 2514007 100.53 2514010 131.46 2514012 291.64 2514015 239.73 2514020 298.28 2514030 692.66 2514040 1,177.81
Webb tech tip
When solvent cementing non-true union ball valves such as the Asahi Omni
Ball Valve, make sure valve is in the open position. This helps vent the fumes from the
cement which may cause swelling or damage to the ball.
Quick Spec
n Blocks from left or right union ports
leaving full pressure on the opposite
end of valve
n “L” ported ball permits flow from
common port to either left or right port
or to OFF position (“Tee” port and
“double-L” optional)
n Blow-out proof bottom entry stem
n All sizes rated for vacuum service
n Polypro and PVDF socket and butt
fusion end connectors available
n EPDM Available
Quick Spec
n PTFE seats with EPDM cushion
n Compact uni-body construction
n All sizes rated for vacuum service
All Three Ports True Union Design!
HIGH QUALITY
LOW PRICE!
HIGH QUALITY
LOW PRICE!
Note: Actuator Operators
available, see page 34.
As Low As
$
11 85
Type-23
Valves
Type 523 Metering Ball Valve
The new design of this valve, which is based on the Ball
Valve 546, facilitates the metering of the smallest quantities
of media, and can be used for sampling. The newly
developed metering ball valve is available in two dimensions,
and ½ and comes with a new scale and display.
PVC with solvent cement Socket w /Thread Ends
 Size PVC EPDM Price PVC FPM Price
 3
⁄8 161523521 $67.69 161523531 $76.15
 ½ 161523522 71.53 161523532 77.78
Quick Spec
n Material PVC, PP-H, PVDF, CPVC and
ABS on request
n Connection Ends Socket, Threaded,
Fusion
n Seat PTFE
n Seals EPDM or FPM
n Scale 0° to 180°
OPTIONAL FEATURES
n Electric actuation
n Positioner for actuation
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 32
32_32 3/30/14 9:40 AM Page 32
Valves
LOW COST AUTOMATION
The EA electrically actuated true union ball
valve is the perfect answer to cost sensitive,
automated valve applications that can’t get
by with less than a full featured valve and
actuator combination. Other low cost automated
valves use a stripped down actuator
with a non-repairable, “throwaway” type
valve. The EA features a fully serviceable
true union ball valve for long reliable service.
EA Series Automated True Union Valves
Item # Size End Connection Price
EATB1050STE 1
⁄2" Socket or Thread $292.14
EATB1075STE 3
⁄4" Socket or Thread 297.92
EATB1100STE 1" Socket or Thread 306.61
EATB1150STE 11
⁄2" Socket or Thread 323.95
EATB1200STE 2" Socket or Thread 339.89
VALVE FEATURES
n All-plastic
n Pressure rating to 225 psi
n PTFE seats
n Full port design
n Double o-ring stem seal
ACTUATOR FEATURES
n All-plastic enclosure
n 3-second cycle time
n Thermal overload protection
n NEMA 4X housing
n Actuator brake for full open/close
Low Cost, Full Featured Plastic Valve
And Actuator - Sizes From 1
⁄2" to 2"
PVC Construction with EPDM Seals
PVC & CPVC True Union 2000 Industrial Ball Valve
PVC & CPVC Utility Ball Valves
A high quality, economical, quarter-turn shut off valve designed for irrigation,
pool and spa applications. Available in IPS sizes 1
⁄2" through 4", with
choice of either socket or threaded end connectors, with 6" socket.
Quick Spec
n Built-in Handle Lockout
n Spears® Dual O-ring Safe-T-Shear® Stem
n Self Adjusting PTFE Floating Seat Design
n Sizes 1
⁄2" - 2" pressure rated to 235 psi @ 73°F, sizes
2-1
⁄2" - 6" and all flanged to 150 psi @ 73°F
n NSF Certified for Potable Water Use
Quick Spec
n PVC Construction
n One-Piece Sealed Unit
n Teflon® HDPE Ball Seats
n EPDM O-ring Seals
n 150 psi Max. 1
⁄2" to 6" @73°F
PVC 140°F, CPVC 200°F Max Temp
n Certified by NSF for Potable Water – All
Utility Ball Valves are Certified by NSF
International for potable water use.
Spears® True Union 2000 Ball Valves, 3-Way Ball Valves and
Ball Check Valves provide maximum versatility with fully
interchangeable valve cartridges. Provides for easier system
design modifications and upgrades in multiphase projects, or
anywhere changes in valve types are desired. Simply
exchange any True Union 2000 valve in-line using existing
union nuts. Also mates with Spears® new Schedule 80 Unions
and Diaphragm Valves. All True Union 2000 valves feature a
low profile, compact design for minimal space requirements.
WOW!
Economy, Utility
and Quality!
Starting At
$
29214
From Only
$
401
Industrial
Grade!
Industrial
Grade!
 PVC CPVC
Socket Thread * 1821-xxx Socket Thread * 1821-xxxC
 Size Item # Price Item # Price Item # Price Item # Price
 1
⁄2 1829-005 * $21.96 1829-005C * $29.01
 3
⁄4 1829-007 * 25.98 1829-007C * 36.53
 1 1829-010 * 30.95 1829-010C * 43.49
 1¼ 1829-012 * 42.81 1829-012C * 69.14
 1½ 1829-015 * 51.56 1829-015C * 73.01
 2 1829-020 * 68.05 1829-020C * 97.65
 2½ 1822-025 $227.66 1821-025 227.66 1822-025C $381.07 1821-025C 381.07
 3 1822-030 300.14 1821-030 300.14 1822-030C 445.56 1821-030C 445.56
 4 1822-040 507.11 1821-040 507.11 1822-040C 807.38 1821-040C 807.38
 6 1822-060 1,095.45 1821-060 1,095.45 1822-060C 1,718.78 1821-060C 1,718.78
 8 1822-080 1,456.96 1822-080C 2,285.99
Options: FKM Seal “1839-“. End Connection Flange “1823-“and Spigot “1827-“ Are Also Available.
*For Steel Reinforced Thread Add “SR” to end of part number. (Check For Pricing for any of these options)
 PVC CPVC
Threaded Socket Threaded Socket
 Size Item # Price Item # Price Item # Price Item # Price
 1
⁄2 2621-005 $4.01 2622-005 $4.01 2621-005C $9.96 2622-005C $9.96
 3
⁄4 2621-007 4.86 2622-007 4.86 2621-007C 12.65 2622-007C 12.65
 1 2621-010 6.61 2622-010 6.61 2621-010C 13.75 2622-010C 13.75
 1¼ 2621-012 8.76 2622-012 8.76 2621-012C 19.38 2622-012C 19.38
 1½ 2621-015 13.37 2622-015 13.37 2621-015C 30.05 2622-015C 30.05
 2 2621-020 16.88 2622-020 16.88 2621-020C 37.38 2622-020C 37.38
 3 2621-030 95.66 2622-015 95.66
 4 2621-020 175.33 2622-020 175.33
PVC Add Prefix “G” End Of Part Number For Gray Color. 6“ with handle 2622-060 $269.82
 Valve Size PHD - Air to Air PHS - Air to Spring
 1
⁄2" PCD15 $351.25 PCS15 $394.26
 3
⁄4" PCD15 351.25 PCS15 394.26
 1" PCD15 351.25 PCS15 394.26
 11
⁄4" PCD15 351.25 PCS15 394.26
 11
⁄2" PCD15 351.25 PCS15 394.26
 2" PCD15 351.25 PCS20 508.35
 21
⁄2" PCD20 481.68 PCS25 754.41
 3" PCD20 481.68 PCS25 754.41
 4" PCD20 481.68 PCS25 754.41
 6" PCD20 481.68 PCS25 754.41
FEATURES
n Four Piston Rack-and
Pinion Design
n Manual Override
n Position Indicator
n Epoxy-Coated Housing
n High Torque Output
n Lightweight, Compact
ALL-AROUND BEST CHOICE
Hayward Series PCD and PCS Actuators are the best choice for
applications requiring pneumatically-actuated true union ball
valves, three way ball valves or butterfly valves. These actuators
are available in models with appropriate torque outputs
for all valves from 1
⁄4" all the way up to 24" pipeline size.
Series PCD & PCS Pneumatic Actuators
OTHER OPTIONS
AVAILABLE
OTHER OPTIONS
AVAILABLE
Use with Ball
Valves page 30,
Butterfly Valves
pages 38 & 39
PCD
PCS
On-Line check out Spears CWV Ball Valve
One of the Most Versatile, Compact Valve Designs Available
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 33
33_33 3/30/14 9:42 AM Page 33
Valves
Electromni® ACTUATOR OPTIONS
n 12 VAC, 24 VAC, 220 VAC, 12 VDC, 24 VDC
n Extra limit switch (SPDT) for se quenc ing with other equipment and for remote light indication
n Position indication lights, built into base of unit, signal whether valve is open or closed
n 2-wire control for retrofitting solenoids for direct wiring timers, level switches, etc.
n Electromni actuator also available with True Union Ball valve, consult sales office.
Price includes valve and actuator.
Quick Spec
n 115 VAC single phase
n 2.2 amps uni-directional 1
⁄4 turn motor
n 5 second cycle time
n Actuator housing of high impact ABS
(NEMA IV, weatherproof)
Quick Spec
n Available from ½" to 6" (6" Venturied)
n Handle with integrated tool for removing
/ adjusting union bushing
n Full port design
n Pressure Ratings
– PN16 up to 232psi PVC, CPVC Solvent
Cemented Socket
– PN10 up to 150psi PVC, CPVC Threaded
or Flanged
– PN10 up to 150psi for PP-H
n 10,000 life cycle
n Blow-Out proof stem
n PVC, CPVC & PROGEF® Natural
n O-Rings EPDM and FPM
n End Connections
– Solvent cement socket
– Thread socket
– Butt Fusion spigot
– PVC+U Flanges
True Union
Available!
True Union
Available!
The Economical Answer To Automated Flow Control
 PVC CPVC
 Size Socket Thread Socket Thread
 3
⁄8 2015003 $278.87 2016003 $278.87 2017003 $284.63 2018003 $284.63
 ½ 2015005 278.87 2016005 278.87 2017005 284.63 2018005 284.63
 ¾ 2015007 286.09 2016007 286.09 2017007 294.82 2018007 294.82
 1 2015010 291.90 2016010 291.90 2017010 307.87 2018010 307.87
 1¼ 2015012 302.06 2016012 302.06 2017012 326.74 2018012 326.74
 1½ 2015015 310.79 2016015 310.79 2017015 334.01 2018015 334.01
 2 2015020 322.84 2016020 323.84 2017020 363.07 2018020 363.07
 EA11 EA21 EA31 EA42
 Combinations Type 107 EA11 2 or 3-Way 2-Way Ball Vlv up to Butterfly Vlv
 +Type 546 Ball Vlv Ball Vlv DN100 Butterfly Vlv Type 567 /568
 Type 567 /568
 Nominal Torque Mdn 10 (20) Nm 10 (20) Nm 60 (120) Nm 100 (250) Nm
Duty Cycle @25°C/15min 40% Reduced 100% 50% 35%
 UL Certification
 Cycles @20°C & Mdn 150000 250000 100000 75000
Control Time s/90° @Mdn 5 s 5 s 15 s 20 s
 Actuation Angle 270° Max. 180° Max. 180° Max. 180°
 Set to 90° Set to 90° Set to 90° Set to 90°
 Connectors F05 F05 F07 F07
TYPE 375-U Ball Valve WITH SOLVENT CEMENT SOCKETS/2
THREADED ENDS Is ideally suited for basic applications encompassing
the water processing/treatment sector,
as well as other applications involving water.
Size PVC / EPDM PVC / FPM
 3
⁄8 161375001 $17.84 161375016 $20.32
 1
⁄2 161375002 18.84 161375017 20.73
 3
⁄4 161375003 22.84 161375018 24.05
 1 161375004 24.69 161375019 30.68
 2 161375007 52.67 161375022 68.39
 4 161375010 214.39 161375025 260.32
OPTIONAL
n Heating Element and Fail-Safe Return for more safety
n Additional Mechanical Limit Switches for position feedback
n Optional Adapter per EN ISO 5211 for F04 and F05 interface
Type EA11 Electric Actuator
The EA11 is our basic version for the open/close operation
of smaller torques. The electric actuator EA11 consists
of a gear, a direct current motor, a base print as well as
equipment for end stops in its standard version.
Type EA21 EA31 & EA42 Electric Actuator
The Electric Actuators EA21, EA31, EA42 are not only excellently equipped but also can make their
point with very high torques; therefore, these actuators can be used to actuate a wide range of valves.
100-230V ~ 24V = ~
Item # Price Item # Price
EA11 Electric Actuator F05 (WS11/14 per EN ISO 5211 with adapter 198.000.587
 198150180 $370.46 198150180 $370.46
EA21 Electric Actuator F05 (WS11/14 per EN ISO 5211 with adapter 198.000.58
 198150182 761.38 198150183 761.38
EA31 Electric Actuator F07 (WS17 per EN ISO 5211 (2”-6½”)
 198150184 1,187.85 198150185 1,187.85
EA41 Electric Actuator F07 (WS22 per EN ISO 5211 (8"-10")
 198150186 1,187.85 198150187 1,187.85
Call Webb For Actuator Accessories. Adapter Plates, Limit Switches, .Heating Elements, Cycle Counter,
Spare Battery Kit, Position sensor 4-20mA, etc.
OPTIONAL
n Ready to operate signal
n Heating element and fail-safe unit for
more safety
n Additional mechanical limit switches for
position feedback
n Cycle time extension
n Actuator monitoring on an additional print:
cycle time monitoring, cycle counter, motor
current monitoring
n Position signalization and 4-20 mA position
feedback
n Positioner
EA21 EA31 EA42
Webb tech tip
UNI-DIRECTIONAL ACTUATOR: One-way motors travel in one direction only
and stop every 90? until signaled to move. These single coil, on/off actuators are adequate
for some ball valve applications in which the valve requires alternate opening and closing.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 34
34_34 3/30/14 9:44 AM Page 34
Valves
Actuated Ball Valve Type 107 Pneumatically Actuated Ball
n Built with electric Valve Type 233
actuator EA11
n Designed for easy
installation & removal
n Integrated stainless
steel mounting inserts
n Voltage 100-230 V,
50-60 Hz
n Control range 90°<)
n Control time 5
s/90°<)
n EA21 for sizes 3
⁄8" to 2", EA31 for sizes 2½" to 4"
n Designed for easy installation and removal
n Integrated stainless steel mounting inserts
n Voltage 100-230 V, 50-60 Hz
n Control range 90°<)
n Control time: EA21: 5s/90°<),
EA31: 15s/90°<)
n Threaded valve ends are only
enclosed for 3
⁄8" to 2"
n Available CPVC, PP, PVDF
n Available 24 Volt
n Maintenance free, 250,000 cycle life
n Available in PVC and CPVC sizes 3
⁄8" - 2"
n Available in PP and SYGEF®-PVDF
in sizes 16 mm - 63 mm
n EPDM and FPM seals
n Available fail close, fail
open, or double acting
n Connections: (socket,
thread, flanged)
n Options include declutchable
manual override, stroke
limiter, and position indicator
Type 131, Type 132 & Type 133
Electrically Actuated Ball Valve
Actuated Valves Shipped in 24 Hours! We Ship FAST!
+GF+ goal to have these valves ready to ship within 24 hours.
Specific terms, including quantities and projects, are available upon
request and apply solely to Georg Fischer LLC distributors.
Actuated Valves Shipped in 24 Hours! We Ship FAST!
Size PVC / EPDM CPVC / EPDM PVC / FPM CPVC / FPM
Type 233 Pneumatic Double Acting True Union Ball Valve w/o Manual Override
 ½ 199233103 $368.31 199233403 $379.08 199233113 $372.31 199233413 $399.54
 ¾ 199233104 375.39 199233404 390.93 199233114 381.39 199233414 410.38
 1 199233105 383.16 199233405 407.08 199233115 389.16 199233415 422.62
 1½ 199233107 456.62 199233407 491.08 199233117 473.62 199233417 512.63
 2 199233108 472.60 199233408 523.29 199233118 484.60 199233418 562.16
 3 199233110 772.15 199233410 972.46 199233120 791.15 199233420 1051.08
 4 199233111 842.15 199233411 1081.23 199233121 852.10 199233421 1157.69
Type 133 Electric 110-230V True Union Ball Valve w/ Manual Override
 ½ 199133003 973.54 199133403 1010.16 199133013 983.23 199133413 1016.62
 ¾ 199133004 978.61 199133404 1006.64 199133014 989.66 199133414 1017.54
 1 199133005 1002.67 199133405 1035.78 199133015 1014.69 199133415 1043.37
 1½ 199133007 1048.92 199133407 1079.93 199133017 1059.34 199133417 1089.95
 2 199133008 1081.23 199133408 1116.12 199133018 1092.43 199133418 1126.46
 3 199133010 1808.16 199133410 1840.13 199133020 1821.55 199133420 1846.88
 4 199133011 1883.54 199133411 1928.75 199133021 1981.96 199133421 1937.64
Type 233 Pneumatic Fail Close True Union Ball Valve w/o Manual Override
 ½ 199233063 383.39 199233363 408.15 199233073 390.92 199233373 412.36
 ¾ 199233064 390.91 199233364 417.88 199233074 397.16 199233374 419.54
 1 199233065 398.46 199233365 430.77 199233075 406.85 199233375 432.16
 1½ 199233067 474.93 199233367 527.69 199233077 481.33 199233377 501.85
 2 199233068 510.41 199233368 560.13 199233078 517.88 199233378 539.87
 3 199233070 942.31 199233370 1296.62 199233080 951.83 199233380 975.56
 4 199233071 1004.77 199233371 1411.85 199233081 1013.12 199233381 1036.74
Type 107 Electric 100-230V True Union Ball Valve w/ Manual Override
 ½ 199107203 483.54 199107303 498.62 199107213 488.93 199107313 506.16
 ¾ 199107204 488.92 199107304 504.92 199107214 495.16 199107314 516.77
 1 199107205 494.31 199107305 509.86 199107215 499.66 199107315 515.69
 1½ 199107207 519.08 199107307 536.63 199107217 525.81 199107317 541.33
 2 199107208 543.85 199107308 558.58 199107218 547.13 199107318 566.08
Size PVC / EPDM PVC / PTFE
DIASTAR 10 Pneumatic Fail Close Diaphragm Valve
 ½ 161624612 $289.70 161624632 $361.85
 ¾ 161624613 324.16 161624633 388.77
 1 161624614 374.77 161624634 413.54
 1½ 161624616 535.23 161624636 620.31
 2 161624617 654.77 161624637 790.46
Size PVC / EPDM PVC / FPM
Type 140 Electric 100-230V Butterfly Valve
w/o Manual Override
 2 199140042 $1294.46 199140062 $1380.62
 3 199140044 1308.46 199140064 1393.54
 4 199140045 1325.69 199140065 1416.16
 6 199140047 1367.69 199140067 1488.31
 8 199140048 1870.62 199140068 1936.31
Size PVC / EPDM PVC / FPM
Type 240 Pneumatic Fail Close Butterfly Valve
w/o Manual Override
 2 199240002 $639.69 199240022 $724.77
 3 199240004 732.31 199240024 732.21
 4 199240005 746.31 199240025 838.92
 6 199240007 1144.76 199240027 1264.31
 8 199240008 1429.08 199240028 1495.54
Size PVC / EPDM PVC / FPM
Type 240 Pneumatic Double Acting Butterfly Valve
w/o Manual Override
 2 199240082 $533.08 199240102 $619.23
 3 199240084 567.54 199240104 652.62
 4 199240085 589.08 199240105 679.54
 6 199240087 800.16 199240107 918.62
 8 199240088 968.16 199240108 1036.41
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 35
35_35 3/30/14 9:48 AM Page 35
Valves
 Size Description Item # Price
Series 79 (Air - Spring) / Type-57 PVC/PP/EPDM – Fast Pack
 11
⁄2" T-57 PVC/EPDM C79 A-S 2911015 $889.48
 2" T-57 PVC/EPDM C79 A-S 2911020 897.57
 21
⁄2" T-57 PVC/EPDM C79 A-S 2911025 947.04
 3" T-57 PVC/EPDM D79 A-S 2911030 1,193.46
 4" T-57 PVC/EPDM D79 A-S 2911040 1,227.64
 6" T-57 PVC/EPDM E79 A-S 2911060 1,769.06
 8" T-57 PVC/EPDM E79 A-S 2911080 3,041.67
 Size Description Item # Price
Series 79 (Air - Air) / Type-57 PVC/PP/EPDM – Fast Pack
 11
⁄2" T-57 PVC/EPDM B79 A-A 2912015 $675.42
 2" T-57 PVC/EPDM B79 A-A 2912020 683.51
 21
⁄2" T-57 PVC/EPDM B79 A-A 2912025 707.80
 3" T-57 PVC/EPDM C79 A-A 2912030 796.84
 4" T-57 PVC/EPDM C79 A-A 2912040 831.02
 6" T-57 PVC/EPDM D79 A-A 2912060 1,233.93
 8" T-57 PVC/EPDM E79 A-A 2912080 2,225.04
Includes: Series 79 Glass
Filled Polyamide Air to
Spring (Single Acting) pneumatic
actuator FAILSAFE
CLOSED, factory mount and
test to ½" – 2" combo or
2½" – 4" Socket T-21 ball
valve.
Includes: Series 79 Glass
Filled Polyamide Air to Air
(Double Acting) pneumatic
actuator 1½" – 6",
Aluminum actuator size 8",
factory mount and test to T57
Butterfly valve.
Includes: Series 79 Glass
Filled Polyamide Air to
Spring (Single Acting) pneumatic
actuator 1½" – 4",
Aluminum actuator 6" – 8"
FAILSAFE CLOSED, factory
mount and test to T-57
Butterfly valve.
Includes: Series 79 Glass
Filled Polyamide Air to Air
(Double Acting) pneumatic
actuator, factory mount and
test to ½" – 2" combo or
2½" – 4" Socket T-21 ball
valve.
 Size Description Item # Price
Series 79 (Air - Spring) / Type-21 PVC/EPDM – Fast Pack
 1
⁄2" T-21 PVC/EPDM A79 A-S 2903005 $250.93
 3
⁄4" T-21 PVC/EPDM A79 A-S 2903007 254.52
 1" T-21 PVC/EPDM A79 A-S 2903010 258.12
 11
⁄4" T-21 PVC/EPDM B79 A-S 2903012 267.11
 11
⁄2" T-21 PVC/EPDM B79 A-S 2903015 434.40
 2" T-21 PVC/EPDM C79 A-S 2903020 552.22
 21
⁄2" T-21 PVC/EPDM C79 A-S 2903025 1,159.29
 3" T-21 PVC/EPDM D79 A-S 2903030 1,504.64
 4" T-21 PVC/EPDM D79 A-S 2903040 1,605.38
 Size Description Item # Price
Series 79 (Air - Air) / Type-21 PVC/EPDM – Fast Pack
 1
⁄2" T-21 PVC/EPDM A79 A-A 2904005 $235.64
 3
⁄4" T-21 PVC/EPDM A79 A-A 2904007 240.13
 1" T-21 PVC/EPDM A79 A-A 2904010 243.73
 11
⁄4" T-21 PVC/EPDM A79 A-A 2904012 251.82
 11
⁄2" T-21 PVC/EPDM A79 A-A 2904015 260.82
 2" T-21 PVC/EPDM A79 A-A 2904020 275.20
 21
⁄2" T-21 PVC/EPDM C79 A-A 2904025 755.47
 3" T-21 PVC/EPDM C79 A-A 2904030 899.37
 4" T-21 PVC/EPDM D79 A-A 2904040 1,114.32
 Size Description Item # Price
Series 92 / Type-57 PVC/PP/EPDM – Fast Pack
 11
⁄2" T-57 PVC/EPDM S92M2 2910015 $1,400.32
 2" T-57 PVC/EPDM S92M2 2910020 1,408.41
 21
⁄2" T-57 PVC/EPDM S92M2 2910025 1,432.69
 3" T-57 PVC/EPDM S92M2 2910030 1,424.60
 4" T-57 PVC/EPDM S92M2 2910040 1,458.77
 6" T-57 PVC/EPDM B92BRM2 2910060 1,988.51
 8" T-57 PVC/EPDM C92BRM2 2910080 2,418.40
Note: Fast Pack delivery times may vary based on availability and
inventory. Every effort will be made to meet our 24-hour shipping
goal. Fast Pack items ordered with other Asahi/America products may
affect delivery.
 Size Description Item # Price
Series 94 / Type-57 PVC/PP/EPDM – Fast Pack
 11
⁄2" T-57 PVC/EPDM A94M2 2909015 $947.04
 2" T-57 PVC/EPDM A94M2 2909020 955.13
 21
⁄2" T-57 PVC/EPDM B94M2 2909025 979.41
 3" T-57 PVC/EPDM B94M2 2909030 971.32
 4" T-57 PVC/EPDM B94BRM2 2909040 1,111.62
Includes: UL-508 listed Series
92 Electric Actuator, 120 vac,
Open/Close, Nema 4X, 5 sec
cycle time, 2 end of travel and
2 extra limit switches, beacon
indicator, manual override, factory
mount and test to T-57
Butterfly valve.
Note: 25 sec cycle time and brake
supplied for 6" and 8" valves
Manual Override Handwheel 8" only.
Includes: UL-508 listed
Series 94 Electric Actuator,
120 vac, Open/Close, Nema
4X, 5 sec cycle time, 2 end
of travel and 2 extra limit
switches, manual override,
factory mount and test to T57
Butterfly valve.
Note: Brake supplied for 4"
valves.
Components and parts may
be purchased separately. Talk
with a Webb sales specialist.
Asahi/America, Inc. Fast Pack Order Guide ALL FAST PACK ACTUATED VALVES SHIP SAME DAY SHIPMENT!
Includes: UL-508 listed
Series 94 Electric Actuator,
120 vac, Open/Close, Nema
4X, 5 sec cycle time, 2 end
of travel and 2 extra limit
switches, manual override,
factory mount and test to
½" – 2" combo or 2½" – 3"
Socket T-21 ball valve.
Includes: UL-508 listed
Series 92 Electric Actuator,
120 vac, Open/Close, Nema
4X, 10 sec cycle time, 2 end
of travel and 2 extra limit
switches, beacon indicator,
manual override, factory
mount and test to ½" – 2"
combo or 2½" – 4" Socket
T-21 ball valve.
 Size Description Item # Price
Series 92 / Type-21 PVC/EPDM – Fast Pack
 1
⁄2" T-21 PVC/EPDM S92M2 2902005 $1,176.84
 3
⁄4" T-21 PVC/EPDM S92M2 2902007 1,181.21
 1" T-21 PVC/EPDM S92M2 2902010 1,184.71
 11
⁄4" T-21 PVC/EPDM S92M2 2902012 1,193.47
 11
⁄2" T-21 PVC/EPDM S92M2 2902015 1,201.34
 2" T-21 PVC/EPDM S92M2 2902020 1,215.36
 21
⁄2" T-21 PVC/EPDM S92M2 2902025 1,667.17
 3" T-21 PVC/EPDM S92M2 2902030 1,669.80
 4" T-21 PVC/EPDM A92M2 2902040 1,767.00
 Size Description Item # Price
Series 94 / Type-21 PVC/EPDM – Fast Pack
 1
⁄2" T-21 PVC/EPDM A94M2 2901005 $761.79
 3
⁄4" T-21 PVC/EPDM A94M2 2901007 765.29
 1" T-21 PVC/EPDM A94M2 2901010 768.79
 11
⁄4" T-21 PVC/EPDM A94M2 2901012 777.55
 11
⁄2" T-21 PVC/EPDM A94M2 2901015 785.43
 2" T-21 PVC/EPDM A94M2 2901020 799.44
 21
⁄2" T-21 PVC/EPDM B94M2 2901025 919.40
 3" T-21 PVC/EPDM B94M2 2901030 922.03
Electric & Pneumatic
Valve and Actuator
Pre Assembled,
Ready to Ship
Electric & Pneumatic
Valve and Actuator
Pre Assembled,
Ready to Ship
Call Webb for
FPM Pricing
Asahi/America, Inc., introduces the Fast Pack, the newest
concept in valve automation. Asahi/America has prepackaged
over 125 of their most popular valve and actuator combinations
in easy to order configurations. Packages feature Asahi
Series 92 or 94 electric actuators or Series 79 pneumatic
actuators mounted on Asahi Type-21 PVC Ball Valves or Type57
PVC Butterfly Valves.
NOW HAVE
ISO CERTIFIED
OUTPUT
NOW HAVE
ISO CERTIFIED
OUTPUT
NOW HAVE
ISO CERTIFIED
OUTPUT
NOW HAVE
ISO CERTIFIED
OUTPUT
Call Webb for FPM Pricing
Call Webb for
FPM Pricing
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 36
36_36 3/30/14 9:50 AM Page 36
Multi-Voltage Actuator
with Fail-Safe and 4-20mA
Digital Positioner Options
n Multi-voltage with auto-voltage sensing
12-24V AC or DC
85-240V AC or DC
n LED status light to indicate operational status of actuator
n Electronic over-torque protection against valve jam
n Thermostatic anti-condensation heater
n Manual override for emergency hand operation
n Remote position indicator
n IP65 weatherproof anti-corrosive and UV protected
polyamide housing
n Local visual position indicator
n Easy mounting with double-D drive
n All external electrical connections via DIN plugs
n CE marked
n Fail-safe and 4-20mA digital positioner options
n Thermally protected motor
n Long cycle life with Trunnion design
n Dual shaft seals to eliminate leakage
n True union ends
n Self compensating Teflon® seats
n Perfectly round and highly polished ball
n Rugged construction
Air x Air
2-Way Air Actuated Ball Valve — “The Engineered Ball Valves”
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
Seal Material Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
PVC
 EPDM ABVA050EPT-PV $351.43 ABVA075EPT-PV $393.71 ABVA100EPT-PV $417.03 ABRA125EPT-PV $447.77 ABRA150EPT-PV $463.32 ABRA200EPT-PV $528.12 ABRA300EPT-PV $798.92 ABRA400EPT-PV $1,118.42
 VITON ABVA050VT-PV 353.37 ABVA075VT-PV 395.30 ABVA100VT-PV 420.34 ABRA125VT-PV 452.56 ABRA150VT-PV 468.30 ABRA200VT-PV 530.59 ABRA300VT-PV 808.60 ABRA400VT-PV 1,154.13
CPVC (CORZAN™
)
 EPDM ABVA050EPT-CP 378.32 ABVA075EPT-CP 407.27 ABVA100EPT-CP 445.37 ABRA125EPT-CP 488.46 ABRA150EPT-CP 516.23 ABRA200EPT-CP 584.68 ABRA300EPT-CP 1,026.18 ABRA400EPT-CP 1,327.37
 VITON ABVA050VT-CP 377.97 ABVA075VT-CP 411.62 ABVA100VT-CP 447.98 ABRA125VT-CP 492.89 ABRA150VT-CP 520.69 ABRA200VT-CP 587.99 ABRA300VT-CP 1,048.92 ABRA400VT-CP 1,362.64
2-Way Electric Actuated Ball Valves
Air x Spring
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
Seal Material Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
PVC
 EPDM ABVS050EPT-PV $425.22 ABVS075EPT-PV $450.38 ABVS100EPT-PV $475.47 ABVS125EPT-PV $519.81 ABVS150EPT-PV $546.14 ABVS200EPT-PV $569.15 ABVS300EPT-PV $876.28 ABVS400EPT-PV $1,192.66
 VITON ABVS050VT-PV 427.64 ABVS075VT-PV 454.72 ABVS100VT-PV 479.08 ABVS125VT-PV 525.16 ABVS150VT-PV 544.78 ABVS200VT-PV 573.73 ABVS300VT-PV 898.47 ABVS400VT-PV 1,230.02
CPVC (CORZAN™
)
 EPDM ABVS050EPT-CP 456.14 ABVS075EPT-CP 476.63 ABVS100EPT-CP 580.19 ABVS125EPT-CP 564.98 ABVS150EPT-CP 596.42 ABVS200EPT-CP 675.46 ABVS300EPT-CP 1,119.30 ABVS400EPT-CP 1,416.09
 VITON ABVS050VT-CP 459.38 ABVS075VT-CP 481.90 ABVS100VT-CP 511.59 ABVS125VT-CP 568.90 ABVS150VT-CP 613.95 ABVS200VT-CP 679.08 ABVS300VT-CP 1,141.33 ABVS400VT-CP 1,453.20
BALL VALVE FEATURES
ACTUATED BALL VALVE FEATURES
Quick Spec
n Rug ged all-plastic con struc tion – ideal for
corrosive atmosphere
n Lightweight assembly – less piping stresses
and lower shipping costs
n Long cycle life design – extensively tested
and proven
n Simple attachment to valve body
mounting lugs
n Simple changeover to spring return
n Compact design with manual override
n Limit switch and travel stops available
Actuator
True Union Diaphragm Valve Type 514
 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
 Diaphragm Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
PVC
 EPDM 161514612 $92.59 161514613 $102.79 161514614 $132.40 161514615 $203.72 161514616 $206.49 161514617 $236.12
 Teflon 161514632 152.78 161514633 162.04 161514634 235.19 161514635 321.30 161514636 321.30 161514637 394.36
CPVC
 EPDM 163514612 167.18 163514613 180.04 163514614 231.49 163514615 299.22 163514616 326.66 163514617 348.94
 Teflon 163514632 232.34 163514633 255.49 163514634 319.79 163514635 395.19 163514636 444.11 163514637 500.69
Quick Spec
n Manually operated diaphragm valve Type
314 with union ends, PVC construction
n Short overall length
n True Union design
n Position indicator
n Flow in either direction irrespective of
installation position
n Bracketing facility incorporated in the valve
Suitable for slurries and abrasive media.
Corrosion resistant and maintenance free.
Standard overall length.
Valves
 PVC CPVC (Corzan™
)
Size Seal Item # Price Item # Price
 3
⁄8" EPDM EBVA1-1-037EPT-PV $732.75 EBVA1-1-037EPT-CP $785.32
 FKM EBVA1-1-037VT-PV 734.90 EBVA1-1-037VT-CP 787.47
 1
⁄2" EPDM EBVA1-1-050EPT-PV 737.05 EBVA1-1-050EPT-CP 789.61
 FKM EBVA1-1-050VT-PV 739.19 EBVA1-1-050VT-CP 791.76
 3
⁄4" EPDM EBVA1-1-075EPT-PV 745.63 EBVA1-1-075EPT-CP 793.91
 FKM EBVA1-1-075VT-PV 748.85 EBVA1-1-075VT-CP 798.20
 1" EPDM EBVA1-1-100EPT-PV 779.96 EBVA1-1-100EPT-CP 834.67
 FKM EBVA1-1-100VT-PV 783.18 EBVA1-1-100VT-CP 837.89
 11
⁄4" EPDM EBVA1-1-125EPT-PV 823.95 EBVA1-1-125EPT-CP 891.54
 FKM EBVA1-1-125VT-PV 828.24 EBVA1-1-125VT-CP 895.83
 PVC CPVC (Corzan™
)
Size Seal Item # Price Item # Price
 11
⁄2" EPDM EBVA1-1-150EPT-PV $865.79 EBVA1-1-150EPT-CP $924.79
 FKM EBVA1-1-150VT-PV 871.15 EBVA1-1-150VT-CP 929.08
 2" EPDM EBVA1-1-200EPT-PV 909.77 EBVA1-1-200EPT-CP 997.75
 FKM EBVA1-1-200VT-PV 915.14 EBVA1-1-200VT-CP 1,003.11
 21
⁄2" EPDM EBVA1-1-250EPT-PV 1,213.39 EBVA1-1-250EPT-CP 1,388.26
 FKM EBVA1-1-250VT-PV 1,236.99 EBVA1-1-250VT-CP 1,412.94
 3" EPDM EBVA3-1-300EPT-PV 1,387.19 EBVA3-1-300EPT-CP 1,676.86
 FKM EBVA3-1-300VT-PV 1,410.79 EBVA3-1-300VT-CP 1,701.53
 4" EPDM EBVA3-1-400EPT-PV 1,559.92 EBVA3-1-400EPT-CP 1,829.20
 FKM EBVA3-1-400VT-PV 1,597.47 EBVA3-1-400VT-CP 1,867.83
Note: For 12-24 volt change EBVA11 to EBVA21; change EBVA31 to EBVA41. Price is the same.
POLYPROPYLENE AND PVDF (KYNAR®) ALSO AVAILABLE
Note 1: End connectors must be specified on all actuated ball valves. Note 2: Model numbers listed are for "threaded" end connectors. For "Sockets" change the "T" in the model number to "S".
Note 3: For options and accessories on above please consult sales office. Note 4: Polypropylene and PVDF also available.
n Double flow rate compared to predecessor
n One housing nut replaces four screws
n Handwheel with built-in locking mechanism
n Designed for easy installation and removal
OPTION:
n Contact customer service for customization
n Self adjusting multifunctional module with
integrated limit switches
n PN16 available as a configuration
CPVC
PVC
See page 33 for
Actuated Valves
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 37
37_37 3/30/14 9:52 AM Page 37
Valves
STANDARD FEATURES
n Size 2-12" (2"-8" Lug style)
n Body 567 Glass filled polypropylene compatible with
 ANSI and DIN flanges
n Body 568 Ductile iron epoxy powder coated ANSI
 150 bolt pattern
n Wetted Materials PVDF liner, PTFE disc seal, PTFE/FPM blend
 on other seals
n Disc PVDF
n Stem 304 or 316 Stainless Steel (non-exposed)
n Movement Lockable lever moves in increments of 5° or
 available with gear operator
The 567 and 568 with a PVDF disc and liner and PTFE seals give users all the advantages of our
standard butterfly valves with the additional benefits of increased chemical resistance and a wider
temperature range. Operating temperature for the valve is -20° to 120°C (-4°F to 248°F). Like
the standard 567 and 568, the valve incorporates the double eccentric off-center shaft design
resulting in less wear and lower torque. The disc seal has an outer shell constructed of PTFE and an
inner core of FPM creating a flexible, reliable seal. In addition, the valve better handles applications
with degreasing media, due to the good dry-sliding properties of PTFE. The other seals in the valve
are made of a FPM/PTFE blend with 15% PTFE. The 567 is wafer style and the 568 is lug style.
Type 567 Butterfly Valve w/ PTFE – Glass Filled Polypro Body
Type 568 Butterfly Valve w/ PTFE – Ductile Iron Epoxy Coated Body
 567 with PTFE 568 with PTFE
 Lever Gear Lever Gear
 Inch d mm Item # Price Item # Price Item # Price Item # Price
 2 63 175567202 $852.03 175567222 $1,129.94 175568302 $1,463.65 175568322 $1,669.43
 21
⁄2 75 175567203 977.04 175567223 1,250.15 175568303 1,679.06 175568323 1,884.85
 3 90 175567204 1,184.76 175567224 1,442.48 175568304 2,034.86 175568324 2,240.66
 4 110 175567205 1,411.71 175567225 1,586.74 175568305 2,423.37 175568325 2,629.17
 5 140 175567206 1,781.95 175567226 1,875.24 175568306 3,059.03 175568326 3,264.82
 6 160 175567207 2,176.22 175567227 2,188.73 175568307 3,786.04 175568327 3,991.83
 8 225 175567208 2,788.80 175567228 2,806.12 175568308 4,960.23 175568328 5,166.02
 10 280 175567209 5,990.16 175567229 6,033.44 — —
 12 315 175567210 7,549.96 175567230 7,593.23 — —
Also available in
PVC and CPV for
wetted materials.
Type 563 Aqua Butterfly Valve
STANDARD FEATURES
n Size 2"-12"
n Body Glass filled Polypropylene
Compatible with ANSI
and DIN flanges
n Wetted Materials PVC, EPDM
n Disc PVC
n Seal EPDM
n Movement Lockable lever moves
in increments of 5
degrees or available
with gear operator
n Stem 304 Stainless Steel
(non-wetted)
n Operating Temp. Maximum temperature
122°F
OPTIONAL FEATURES
n Actuation Electric actuation,
Pneumatic actuation
APPLICATIONS
n For water use only
n Aquariums
n Water Parks
The Type 563 Aqua butterfly valve from Georg Fischer operates at pressures of up to 150PSI
and can handle temperatures from 32°F to 142°F. The wetted inner body is made of PVC with
EPDM seals. Because of the plastic body, the Aqua valve is light weight and installs easily
between flanges. The Aqua valve is compatible with ANSI and DIN flanges and is available
from 2" to 12". The O-ring seals allow the valve to be installed without additional gaskets.
 Size Lever Gear
 (In) Item # Price Item # Price
 2 161 563 002 $108.22 161 563 042 $316.11
 2½ 161 563 003 117.71 161 563 043 322.75
 3 161 563 004 124.35 161 563 044 329.40
 4 161 563 005 139.54 161 563 045 341.74
 6 161 563 007 199.35 161 563 047 407.35
 8 161 563 008 311.36 161 563 048 470.83
 10 161 563 009 711.94 161 563 049 759.41
 12 161 563 010 1,044.19 161 563 050 1,139.11
kv 100 values
kv 100 l/mm Cv 100 gal/min kv 100 m3
/h
DN mm DN in d mm (p=1
bar) (p=1
psi) (p=1
bar)
50 2 63 1470 103 88
65 21
⁄2 75 2200 154 132
80 3 90 3000 210 180
100 4 110 6500 455 390
125 5 140 11500 805 690
150 6 160 16600 1162 1000
200 8 225 39600 2772 2380
OPTIONAL FEATURES
n Actuation Electric actuation, Pneumatic actuation
n Movement Fine adjustment lever allows disc to be
 opened at any angle from 0° to 90°
n Hardware Teflon coated fasteners and springs
1 - PTFE disc seal
2 - Shaft seal o-rings with PTFE blend
3 - Static FPM flange seal
4 - FPM core of disc seal
?
? ?
?
BYV Series Butterfly Valves
OPTIONS
n Over-Molded or Field Mountable 316
Stainless Steel Lugs
n Standard Body PVC, CPVC, & GFPP Same
For Disc Material
n Gear Operators
n Complete Range of Pneumatic or Electric
Actuators
n Stem Extensions
n 2" Square Operating Nut
n Chain Operator for Gear Box
FEATURES
n One Piece Body and Disc in
PVC, CPVC and GFPP Materials
n External Disc Position and Flow Indication
n Revolutionary Hand Lever with 19 Lockable Stop Positions and 360° Interlock
n Hydro-dynamic Centric Disc Design for Increased Flow Performance
n Over-Sized Liner Face Maximizes Surface Contact with Flanges
n EPDM, Viton® or Nitrile Liners
n 1-Piece 316 Stainless Steel Stem with Threaded Retaining Gland
n Stem Bearing and Seal Retainer for Absolute Stem Positioning and Sealing
n ISO 5211 Top Flange and Stem Drive
n All Sizes Meet ANSI B16.10 / ISO 5752 Narrow Face-to-Face Dimensions
n Pressure Rated at 150 PSI / 10 Bar in All Sizes @ 70°F Non-Shock
Available in multiple thermoplastic materials from
2? through 12?, the BYV has an extremely robust
body construction while lighter weight than a
metal equivalent. The revolutionary hand lever
design features a 72 spline interlock mechanism
allowing for 19 stopping positions every 5 degrees.
Size PVC CPVC GFPP
2 BYV1(1)020A0(E)K000 $261.90 BYV2(2)020A0(E)K000 $342.00 BYV4(4)020A0(E)K000 $446.20
2½ BYV1(1)025A0(E)K000 294.31 BYV2(2)025A0(E)K000 385.00 BYV4(4)025A0(E)K000 469.23
3 BYV1(1)030A0(E)K000 294.31 BYV2(2)030A0(E)K000 372.39 BYV4(4)030A0(E)K00 476.60
4 BYV1(1)040A0(E)K000 330.30 BYV2(2)040A0(E)K000 432.06 BYV4(4)040A0(E)K000 549.20
6 BYV1(1)060A0(E)K000 495.01 BYV2(2)060A0(E)K000 648.83 BYV4(4)060A0(E)K000 828.90
8 BYV1(1)080A0(E)K000 919.80 BYV2(2)080A0(E)K000 1,203.17 BYV4(4)080A0(E)K000 1,458.21
Lever Control & EPDM Seals (Call For Other Option Pricing)
Options (E)PDM Seal, (F)PM Seal, (N)itrile Liner & Seal. Disc Material: (1)PVC, (2)CPVC, (4)GFPP
Type
567
Type
568
NEW
Also Available with Reduction Gear & Handwheel, or Bare Shaft Configuration Call For Pricing
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 38
38_38 3/30/14 9:55 AM Page
BY Series Butterfly Valves
11
⁄2" to 12" PVC, Corzan® CPVC, PPL – Wafer and Lug Designs
 Viton® Liner & Seals EPDM Liner & Seals
 Size Body Disc Item # Price Item # Price
 PVC PVC BY110200VLA $414.66 BY110200ELA $198.80
 PVC PPL BY140200VLA 428.08 BY140200ELA 204.89
 3" PVC PVC BY110300VL 474.42 BY110300EL 219.52
 PVC PPL BY140300VL 489.06 BY140300EL 226.84
 4" PVC PVC BY110400VL 584.14 BY110400EL 254.88
 PVC PPL BY140400VL 593.94 BY140400EL 265.87
 6" PVC PVC BY110600VL 940.27 BY110600EL 382.94
 PVC PPL BY140600VL 968.33 BY140600EL 395.14
Lever Operated 8" PVC PVC BY110800VL 1,573.23* BY110800EL 680.50*
 PVC PPL BY140800VL 1,617.12* BY140800EL 701.26*
Gear Operated 10" PPL PVC BY41100VG 3,444.03 BY41100EG 1,352.46
 PPL PPL BY44100VG 3,539.76 BY44100EG 1,392.73
Gear Operated 12" PPL PVC BY41120VG 4,714.79 BY41120EG 1,872.04
 PPL PPL BY44120VG 4,846.52 BY44120EG 1,928.13
* Manual price shown Corzan® is a trademark of BF Goodrich Company.
Hayward 11
⁄2" through 12" all-Plastic Butterfly Valves are rated at a
full 150 psi. Unlike other plastic butterfly valves, Hayward valves
are constructed from a one piece body that incorporates fully supported
flanged bolt holes to prevent stressing of the mating pipe
flanges. Their heavy duty construction stands up to the most
demanding applications.
FEATURES
n Rated at 150 PSI
n Stainless Steel Shaft
n Fully Supported Flange
Bolt Holes
n Full Body, V-Notch Liner
n Blowout-Proof Shaft
n Viton, EPDM or Nitrile
Liners
OPTIONS
n Stem Extensions
n Lug Body Design
n Gear Operators
n Electric Actuators
n Pneumatic Actuators
n Titanium Shaft
n 2" Square Operating Nut
n PVDF Discs
11
⁄2"-2"
This full-featured valve is engineered to
provide accurate throttling control and
shutoff for industrial, chemical and water
treatment applications.
 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
PVC Socket & Thread Ends (True Union Style)
EPDM 2729-005 2729-007 2729-010 2729-012 2729-015 2729-020
 $170.38 $193.42 $238.35 $356.81 $375.07 $443.73
Viton® 2739-005 2739-007 2739-010 2739-012 2739-015 2739-020
 189.31 193.17 261.94 424.24 434.04 525.85
CPVC Socket & Thread Ends (True Union Style)
EPDM 2729-005C 2729-007C 2729-010C 2729-012C 2729-015C 2729-020C
 301.65 335.74 387.50 582.01 599.24 638.28
Viton® 2739-005C 2739-007C 2739-010C 2739-012C 2739-015C 2739-020C
 386.61 412.21 501.23 692.48 701.00 800.07
Also available with Stainless Steel Reinforced (SR) Plastic Thread Ends
PVC, CPVC Diaphragm Valves
A Better Butterfly Valve
NEW DESIGN FEATURES
n Flange Stopper – prevents over-compressing
liners due to improper installation.
n Absorption Channel – Never worry
about an over-tightened liner
causing excessive stem torque
n Spherical Disc – Gain higher Cv and
extended valve cycle life as a result
of new disc design
n Plasgear Plastic gear operator – The first
industrial non-metallic gear box, offers
superior corrosion resistance
Gear
 Lever Only Gear Only
 11
⁄2" 2" 21
⁄2" 3" 4" 6" 8" 10" 12"
PVC Body/PP Disc/EPDM Seats
3730015 3730020 3730025 3730030 3730040 3730060 3730080 3719100 3719120
$224.12 $233.81 $263.20 $253.63 $294.78 $441.22 $821.43 $1,551.68 $2,529.84
W/Viton Seats
3731015 3731020 3731025 3731030 3731040 3731060 3731080 3720100 3720120
 484.65 443.50 636.47 514.53 627.10 1,011.67 1,691.03 3,586.39 5,275.43
PVDF Body/PVDF Disc/Viton Seats
3745015 3745020 3745025 3745030 3745040 3745060 3745080 3729100 3729120
1,354.70 1,354.70 1,646.77 1,720.52 2,438.74 4,790.59 8,455.16 12,803.48 6,593.47
11
⁄2" - 8" Gear Valves - Call for pricing.
Lever
Quick Spec
n Stainless steel shaft has full en gage ment with disc and
is a non-wetted part isolated from the media by single
O-ring seals on top and bottom trunnions of disc
n Only disc and liner are wetted parts
n 11
⁄2"-8" with lever handle
n 8"-24" with gear operator
n PVC body has Polypropylene disc standard
Type-57 Butterfly Valves
n Stem Extensions
n Other seat materials available on special order
n Gear operators for all sizes
n Sprocket and chain wheel: all sizes
n Handle locking devices
n 2" square operating nut
n Stem of any commercially available metal
n Lug style butterfly valves
n PVDF Damper style available
n Electric or Pneumatic actuator
OPTIONS
Valves
Starting At
$
22412
NEW Features
at the Same Price!
NEW Features
at the Same Price!
PVC Dump Valve
 Normally Closed (Automatic Spring Return)
 Size Seal Item # Price
 4" EPDM IDA400V-PV-NC $458.37
 FKM IDA400EP-PV-NC 447.44
 5" EPDM IDA500V-PV-NC 567.52
 FKM IDA500EP-PV-NC 556.59
 6" EPDM IDA600V-PV-NC 753.05
 FKM IDA600EP-PV-NC 742.13
 Double Acting (Air x Air)
 Size Seal Item # Price
 4" EPDM IDA400V-PV-AA $437.71
 FKM IDA400EP-PV-AA 425.63
 5" EPDM IDA500V-PV-AA 534.90
 FKM IDA500EP-PV-AA 524.43
 6" EPDM IDA600V-PV-AA 709.58
 FKM IDA600EP-PV-AA 698.48
Series “IDA” Quick Dump Valve
Offered as a normallyclosed
air x spring
version, and a doubleacting
air x air version
in 4", 5" and 6" sizes,
in PP, PVDF and PVC.
Precision Engineered Quick Spec
n Low Profile Design
n Multiple End Connector Options
n Heavy Bodied Schedule 80 PVC or CPVC
n PTFE Diaphragms Optional
As Low As
$
17038
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 39
39_39 3/30/14 9:56 AM Page 39
Quick Spec Type-14 Pneumatic Diaphragm Valve
n All-thermoplastic construction for
superior corrosion resistance
n Square actuator to body design results
in excellent sealing characteristics
n NAMUR pad mount for easy installation
of solenoid valve
n Choice of Air-toSpring or Air-to-Air models
n Position indicator provides local
indication of valve position
n Excellent throttling capabilities due to
diaphragm type actuator and valve
weir design
n Size: 1
⁄2" to 2"
n Body: PVC, CPVC, PP, PVDF
n Actuator housing: PPG
n Type: Air-to-Spring or Air-to-Air
n Diaphragm: TFE, EPDM, Nitrile, Viton
n End connector: Flanged
n Air supply: Recommended – 60 psi,
maximum – 90 psi
Valves
 Body Bonnet Dia PVC CPVC PP PVDF
 PPG PPG PPG PPG
 Size EPDM Teflon EPDM Teflon EPDM Teflon EPDM Teflon
Diaphragm Valves Type 14 Air-to-Air – Flanged
 1413 1414 1415 1416 1417 1418 1421 1419 1
⁄2" (005) $364.33 $466.43 $581.43 $605.51 $559.68 $596.47 $608.31 $674.36 3
⁄4" (007) 386.69 494.38 586.99 621.32 575.36 613.73 633.31 702.56
1" (010) 412.70 528.68 600.38 637.45 587.24 628.52 678.17 760.13
11
⁄4" (012) 514.35 662.81 613.95 793.28 594.64 757.19 903.70 1,011.55
11
⁄2" (015) 646.75 828.10 765.46 810.90 738.48 816.00 960.02 1,075.13
2" (020) 790.35 833.31 835.57 1,077.09 790.38 1,027.81 1,229.91 1,375.35
Diaphragm Valves Type 14 Air-to-Spring* – Flanged
 1423 1424 1425 1426 1427 1428 1422 1429 1
⁄2" (005) $365.22 $465.72 $732.67 $896.85 $746.46 $891.94 $900.12 $987.69 3
⁄4" (007) 387.82 494.38 768.13 930.55 798.25 932.00 944.60 1,045.56
1" (010) 412.84 528.68 802.25 965.71 830.16 980.47 981.68 1,088.56
11
⁄4" (012) 519.18 662.81 1,035.07 1,285.17 1,060.92 1,283.66 1,423.58 1,577.96
11
⁄2" (015) 649.05 828.10 1,085.47 1,314.66 1,131.45 1,354.64 1,467.94 1,643.86
2" (020) 791.27 1,012.13 1,499.21 1,833.24 1,531.63 1,819.00 1,985.17 2,216.28
* Air-to-Spring Actuators supplied Failsafe closed. For Failsafe open please specify.
Air to Spring PVC/PTFE Diaphragm EPDM Seals
1
⁄2" 3
⁄4" 1" 11
⁄2" 2"
 Item # Price Item # Price Item # Price Item # Price Item # Price
Socket 841067005 $527.71 841067007 $564.84 841067010 $564.84 841067015 $931.17 841067020$1249.08
Thread 841068005 527.71 841068007 564.84 841068010 564.84 841068015 931.17 841068020 1249.08
Air to Spring PVC/PTFE Diaphragm FKM Seals
Socket 841073005 $503.63 841073007 $527.71 841073010 $559.99 841073015 $848.86 841073020$1079.63
Thread 841074005 503.63 841074007 527.71 841074010 559.99 841074015 848.86 841074020 1079.63
Air to Air PVC/PTFE Diaphragm EPDM Seals
Socket 841073005 $503.69 841073007 $527.71 841073010 $559.99 841073015 $848.86 841073020$1079.63
Thread 841074005 503.69 841074007 527.71 841074010 559.99 841074015 848.86 841074020 1079.63
Air to Air PVC/PTFE Diaphragm FKM Seals
Socket 841076005 $514.80 841076007 $542.24 841076010 $577.74 841076015 $876.30 841076020$1147.42
Thread 841077005 514.80 841077007 542.24 841077010 577.74 841077015 876.30 841077020 1147.42
Specifications Unit 1
⁄2" 3
⁄4" 1" 11
⁄2" 2"
Orifice Diameter mm 16 22 22 40 50
inch 0.630 0.866 0.866 1.57 1.97
Cv Value 58 8 CF CF
Actuator Dimension mm 50 x 50 60 x 60 60 x 60 95 x 95 110 x 110
inch 1.97 x 1.97 2.36 x 2.36 2.36 x 2.36 3.74 x 3.74 4.33 x 4.33
Travel Stop
Without Indicator Price With Indicator Price 1
⁄2" 841081005 $96.37 841082005 $96.37 3
⁄4" 841081007 104.69 841082007 104.69
1" 841081010 104.69 841082010 104.69
11
⁄2" 841081015 116.32 — NA
2" 841081020 116.32 — NA
Speed Controller
Air-To-Spring Price Air-To-Air Price 1
⁄2" 841079005 $61.48 841080005 $111.33 3
⁄4" 841079007 61.48 841080007 111.33
1" 841079010 61.48 841080010 111.33
11
⁄2" 841079015 61.48 841080015 111.33
2" 841079020 61.48 841080020 111.33
n Applications: DI Water, Chemical
n Operating Temperature Media: 0-60°C, 32-140°F
n Operating Temperature Ambient: 0-60°C, 32-140°F
n Working Pressure: 0.4 MPa, 60 PSI
n Pilot Air Pressure: 0.4-0.5 MPa, 60-72.5 PSI
n Back Pressure: 0.2 MPa, 30 PSI
n Air Port Connection: Re 1/8
n Connection: True Union with Socket, Thread or Flange
n Actuator Type: Air to Open (Normally Closed), Air to Air
n Options: Position Indicator, Travel Stop, Bypass Valve
AD-16 Compact Air
Diaphragm Valve
Quick Spec
n Most compact design
available
n Extended cycle life
n PVC construction
n PTFE diaphragm
n True union design
n Available with socket,
thread and flange ends
Starting At
$
50363
Options for all
pneumatic actuators
 Item # Description Price
 2412761 3-15 PSI Air-To-Air $1,908.36
 2413761 3-15 PSI Air-To-Spring 1,578.82
 2412762 4-20 MA Air-To-Air 2,491.41
 2413762 4-20 MA Air-To-Spring 2,326.22
 Item # Description Price
 2403779 NEMA IV-Double Limit Switch $366.16
 2403780 NEMA VII-Double Limit Switch 536.33
 2401779 NEMA IV Solenoid 211.08
 2401780 NEMA VII Solenoid 439.34
Socket & Thread available in the above listed materials
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 40
40_40 3/30/14 9:57 AM Page 40
True Union Di a phragm Valve
Flanged Di a phragm Valves
 Body Diaphragm 1
⁄2" 3
⁄4" 1" 11
⁄2" 2"
 PVC EPDM 1461005 1461007 1461010 1461015 1461020
 $148.56 $165.87 $213.67 $320.51 $381.14
 PVC TEF 1462005 1462007 1462010 1462015 1462020
 240.88 252.65 340.72 502.41 619.35
 CPVC EPDM 1463005 1463007 1463010 1463015 1463020
 227.90 246.89 313.27 480.76 508.44
 CPVC TEF 1464005 1464007 1464010 1464015 1464020
 355.27 356.59 395.76 701.64 856.13
 PP EPDM 1465005 1465007 1465010 1465015 1465020
 199.05 218.00 275.50 433.42 503.86
 PP TEF 1466005 1466007 1466010 1466015 1466020
 295.69 310.40 417.23 616.47 753.62
 PVDF= TEF 1467005 1467007 1467010 1467015 1467020
 360.58 421.57 602.02 895.10 1,136.19
 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
PVC Body – EPDM Diaphragm
 Socket 1526005 $129.25 1526007 $142.51 1526010 $183.61 1526012 $274.91 1526015 $275.03 1526020 $328.56
 Threaded 1527005 129.25 1527007 142.51 1527010 183.61 1527012 274.91 1527015 275.03 1527020 328.56
PVC Body – Teflon Diaphragm
 Socket 1528005 212.09 1528007 221.76 1528010 296.91 1528012 435.08 1528015 435.08 1528020 536.87
 Threaded 1529005 212.09 1529007 221.76 1529007 396.91 1529012 435.08 1529015 435.08 1529015 536.87
 Body Diaphragm 21
⁄2" 3" 4"
 PVC EPDM 1461025 1461030 1461040
 $547.00 $620.50 $911.24
 PVC TEF 1462025 1462030 1462040
 862.84 1,068.70 1,513.89
 CPVC EPDM 1463025 1463030 1463040
 805.96 1,026.54 1,367.47
 CPVC TEF 1464025 1464030 1464040
 1,198.05 1,465.09 2,076.61
 PP EPDM 1465025 1465030 1465040
 734.51 801.34 1,173.85
 PP TEF 1466025 1466030 1466040
 1,033.48 1,274.73 1,800.70
 PVDF= TEF 1467025 1467030 1467040
 1,801.91 2,273.55 3,258.93
Flanged Di a phragm Valves
SPECIFICATIONS
SIZE: 1
⁄2"-2"
BODY MATERIAL: PVC, CPVC, PP, PVDF
BONNET MATERIAL: PVC, PPG, PVDF
DIAPHRAGMS: Teflon®, EPDM, Nitrile, Viton
n Diaphragms in other materials such as
Nitrile (Buna N), Viton
n 2" square or T-nut operating nuts
n Stem extensions for out of reach
ap pli ca tions
n Three-part Diaphragm: Teflon, PVDF
gas barrier and EPDM backing cushion,
to prevent permeation of aggressive
gasses, such as in chlorine service
n Locking handles for tamper proof valves
n Manual limit switches for remote
position in di ca tion by lights or for
sequencing of other equipment
n Pneumatic or electric actuation
Type-14 Diaphragm Valve
FLANGED 1
⁄2" TO 2"
OPTIONS
Type-14 Diaphragm Valve
 PP PVDF
 Size -5°F 115 PSI 141°F -5°F 141°F 176°F 213°F
 (inches) 104°F 115 PSI 195°F 140°F 175°F 212°F 250°F
 1
⁄2 – 2 150PSI 115 PSI 75PSI 150PSI 120PSI 95PSI 75PSI
Pressure Vs Temperature (PSI, Water, Non-Shock)
 PVC CPVC
 Size 30°F 130 PSI 30°F 115 PSI 85 PSI 45 PSI
 (inches) 104°F 130 PSI 104°F 115 PSI 85 PSI 45 PSI
 1
⁄2 – 2 150PSI 130 PSI 150PSI 115 PSI 85 PSI 45 PSI
= PVDF Valves include a PVDF Gas Barrier Note: Other sizes larger than 4" are available.
Note: Socket or Threaded end connectors are available with PVC and CPVC bodies
Quick Spec
n True-Union end connectors for ease of
installation and maintenance
n Bubble-tight closure, even in slurry applications
or flows with suspended particles
n Large weir surface allows greater flows
with less movement of diaphragm
n Position indicator and adjustable travel stop
to prevent over tight en ing
n EPDM or Teflon/PVDF backed diaphragms,
PVC, CPVC, Polypropylene and PVDF bodies
n Socket or threaded end connectors, buttfusion,
PP, & PVDF are also available
Quick Spec
n Flanged face-to-face di men sions are
equal to most commonly used lined
steel diaphragm valves
n Body and bonnet materials are
solid thermoplastic
n Only body and diaphragm are wetted parts
n Bubble-tight closure, even in
slurry applications
n Large weir surface allows greater flows
with less movement of diaphragm
n Position indicator and adjustable travel
stop to prevent overtightening
Quick Spec
n Flanged face-to-face dimensions are
equivalent to most commonly used
metallic valves
n Square body to bonnet design results in
superior sealing characteristics
n Position indicator and travel stop
prevent over tightening
n Bonnet seals to protect internals from
corrosive environments
n Weir design allows for excellent
throttling capabilities
n Bubble-tight sealing in applications such
as slurries and suspended particles
n All thermoplastic construction for
ultimate corrosion resistance in the most
aggressive applications
n Low profile design accommodates space
limitations
Valves
FLANGED 21
⁄2, 3 & 4"
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 41
41_41 3/30/14 9:59 AM Page 41
695 Series Miniature Check Valves
586 Series Plastic Needle Valves
End Connector End Connector
Item # Size Price Item # Size Price
POLYPROPYLENE NYLON
PP695-4B4B-B 1
⁄4" $2.14 N695-4B4B-B 1
⁄8" $2.37
PP695-4B4B-E 1
⁄4" 2.14 N695-4B4B-E 1
⁄8" 2.37
PP695-4B4B-F 1
⁄4" 2.25 N695-4B4B-F 1
⁄8" 2.49
PP695-3B3B-B 3
⁄16" 2.14 N695-3B3B-B 3
⁄16" 2.37
PP695-3B3B-E 3
⁄16" 2.14 N695-3B3B-E 3
⁄16" 2.37
PP695-3B3B-F 3
⁄16" 2.25 N695-3B3B-F 3
⁄16" 2.49
PP695-2B2B-B 1
⁄8" 2.14 N695-2B2B-B 1
⁄8" 2.37
PP695-2B2B-E 1
⁄8" 2.14 N695-2B2B-E 1
⁄8" 2.37
PP695-2B2B-F 1
⁄8" 2.25 N695-2B2B-F 1
⁄8" 2.49
This pricing does NOT include strainers shown in inset photo.
Item # Price
PVC586-4F4F-E $9.86
PVC586-4F4F-T 10.64
WFP586-4F4F-E 11.14
WFP586-4F4F-T 11.94
PVC586-4F4M-E 9.86
PVC586-4F4M-T 10.64
WFP586-4F4M-E 11.14
WFP586-4F4M-T 11.94
PVC586-4CSM4CSM-E 12.16
PVC586-6CSM6CSM-E 12.40
Code Identification
(B) BARB
Materials
(PP) Polypropylene
(N) White Nylon
(K) Kynar PVDF Black
Seals
(B) Buna-N
(E) Ethylene Propylene
(F) Fluroelastomer
Code Identification
(M) M.N.P.T. Male
(F) F.N.P.T. Female
(B) BARB
(CSM) Compression Specialty Mfg.
Materials
(FP) Filled Polypropylene
(PVC) PVC – Poly Vinyl Chloride
(PVDF) Kynar
Stem Seals, Seals
(E) Ethylene Propylene
(T) Teflon
A D Opening Dia.
.500 1.40 .080
.500 1.72 .115
.500 2.00 .125
1
⁄4 3
⁄16 1
⁄8
B=1.0 .85 .69
C=1.0 .85 .69
PP 695 2 B 2 B E
Seal
End Connector
Size
End Connector
Size
Model
Material
PVC 586 4 F 4 F E
Seal
End Connector
Size
End Connector
Size
Model
Material
Setting today‘s standards in performance, quality and reliability.
To determine overall dimension for your
valve design add together the dimensions
trom the chart below.
Dimensions
A Male End 1.34
B Female End 1.01
C BARB End 1.67
D (PVC only) Comp. End 1.33
 End End Approx. Max
 Item # Connector Connector (C.V.) Pressure
Female Pipe x Female Pipe
5862F2F 1
⁄8 F.N.P.T. 1
⁄8 F.N.P.T. .40 125
5864F4F 1
⁄4 F.N.P.T. 1
⁄4 F.N.P.T. .40 125
Male Pipe x Male Pipe
5862M2M 1
⁄8 M.N.P.T. 1
⁄8 M.N.P.T. .40 125
5864M4M 1
⁄4 M.N.P.T. 1
⁄4 M.N.P.T. .40 125
Barb x Barb
5864B4B 1
⁄4 BARB 1
⁄4 BARB .40 125
5866B6B 3
⁄8 BARB 3
⁄8 BARB .40 125
5868B8B 1
⁄2 BARB 1
⁄2 BARB .40 125
Compression x Compression
5864CSM4CSM 1
⁄4 CSM 1
⁄4 CSM .40 125
5866CSM6CSM 3
⁄8 CSM 3
⁄8 CSM .40 125
Quick Spec
n The SMC Miniature check valve series is a qeneral purpose check valve
which operates in any position, horizontal or vertical.
n 695 Series offers a low-resistance, high flow check valve where space is limited.
n Nylon, for general use, poly for excellent chemical resistance, positive seal
at pressure.
n Standard cracking pressure 1
⁄3 psi.
n Guided stainless steel ball and spring.
n For Technical Assistance, custom springs, seals, and end combinations
please call or fax our Customer Service Department.
Quick Spec
n MIX & MATCH end combination special orders
n Excellent chemical and corrosion resistance
n Maximum operating temperature 120°F
n For Technical Assistance, seals, and end combinations
please call or fax our Customer Service Department
Valves
From Only
$
9 86
Precise Flow Control with Fine Adjustment of Corrosive and High Purity Fluids
Quick Spec
n Produced in two styles: Globe pattern (straight 180°)
and Angle pattern (90°)
n Three standard end connections: 1
⁄4", 3
⁄8" and 1
⁄2" FNPT
n Needle finish, SPI/SPE #1. Bubble tight, low torque shutoff
long term performance
n 24 Pitch metering thread. 20% Finer metering control
n PTFE, Teflon® sealed, chemical resistance, high purity
n Versatile and simple panel mount system
n Integrally designed panel mounting, no fasteners required,
mounts to panel thicknesses from 1
⁄16" to 1
⁄2"
n No elastomers (O-Rings), metals or lubricants, no corrosion,
no contamination
www.facebook.com/webbplastics
Throttle Master Needle
Valves: PVC, CPVC, PVDF &
Polypropylene – WITH TEFLON NO
METAL, ELASTOMERS, OR LUBRICANTS
 Description PVC Price CPVC Price PP Price PVDF Price
 ¼ FNPT Globe NG-250-PVC $38.42 NG-250-CPV $45.00 NG-250-PPR $42.36 NG-250-PVD $90.33 3⁄8 FNPT Globe NG-375-PVC 38.42 NG-375-CPV 45.00 NG-375-PPR 42.36 NG-375-PVD 90.33
 ½ FNPT Globe NG-500-PVC 41.72 NG-500-CPV 48.73 NG-500-PPR 45.73 NG-500-PVD 90.33
 ¼ FNPT Angle NA-250-PVC 38.42 NA-250-CPV 45.00 NA-242.3650-PPR NA-250-PVD 90.33 3⁄8 FNPT Angle NA375-PVC 38.42 NA375-CPV 45.00 NA375-PPR 42.36 NA375-PVD 90.33
 ½ FNPT Angle NA500-PVC 41.72 NA500-CPV 48.73 NA500-PPR 45.73 NA500-PVD 90.33
Call Webb For Replacement Parts and the NGL & NAL Valve
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 42
42_42 3/31/14 7:46 AM Page 42
 1
⁄2" 3
⁄4" 1"
 Item # Price Item # Price Item # Price
 PVC VBM050V-PV $105.86 VBM075V-PV $122.76 VBM100V-PV $137.21
 CPVC VBM050V-CP 130.93 VBM075V-CP 151.88 VBM100V-CP 170.74
 Polypro VBM050V-PP 141.40 VBM075V-PP 162.35 VBM100V-PP 183.30
 Teflon NA NA VB075V-PF 432.61 VB100V-TF 451.46
For socket connector specify "S" in part number (ex. VBM050VS-PV). For threaded end connector specify "T"
in part number (ex: VBM050VT-PV). No additional charge.
DESIGN:
The Plast-O-Matic VBM Vacuum Breakers have only one moving part – the patented
self-sealing diaphragm, and this provides both design simplicity and maximum operating
dependability. This normally-closed design seals in the identical location every time producing
a very dependable, long-life seal. Series VBS Vacuum Breakers feature a corrosion resistant
Teflon® PFA. Maximum working pressure is 100 PSI @ 75°F (6,9 bar @ 24°C).
Series VBM & VB Threaded with Viton seals
 11
⁄2" 2" 3"
 Item # Price Item # Price Item # Price
PVC VBS150V-PV $267.10 VBS200V-PV $335.18 VBS300V-PV $669.33 VBS400VT-PV $863.08
PVC VBS150EP-PV 261.87 VBS200EP-PV 329.96 VBS300EP-PV 663.05
CPVC VBS150V-CP 366.52 VBS200V-CP 476.60 VBS300V-CP 937.46 VBS400VT-CP Call....
CPVC VBS150EP-CP 361.38 VBS200EP-CP 471.35 VBS300EP-CP 932.22
Nat PP VBS150V-PP 340.43 VBS200V-PP 504.20 VBS300V-PP 801.29 VBS400VT-PP Call....
Nat PP VBS150EP-PP 333.96 VBS200EP-PP 398.04 VBS300EP-PP 796.07
PVDF VBS150V-PF 1,105.07 VBS200V-PF 1,139.64 VBS300V-PF 2,075.01 VBS400VT-PF Call....
PVDF VBS150EP-PF 1,099.83 VBS200EP-PF 1,134.10 VBS300EP-PF 2,069.79
For socket connector specify "S" in part number (ex. VBS150VS-PV). For threaded end connector specify "T"
in part number (ex: VBS150VT-PV). No additional charge.
Series "VBS" Threaded Normally Closed High Volume Vacuum Breakers
VBM
Valves
Compact, Self-Closing Vacuum Breakers
PROTECT AGAINST
HAZARDS, DAMAGE
AND FINANCIAL
LOSSES CAUSED BY
VACUUM! As Low As
$
105 86
PVC Needle Valve
Size Threaded Socket Price S/R Thread Price
Globe Pattern 1
⁄4" 5591-002 5592-002 $54.03 – 3
⁄8" 5591-003 5592-003 54.03 – 1
⁄2" 5591-005 5592-005 58.87 5591-005SR $50.20
Angle Pattern 1
⁄4" 5691-002 5692-002 54.03 – 3
⁄8" 5691-003 5692-003 54.03 – 1
⁄2" 5691-005 5692-005 58.87 5691-005SR 50.20
CPVC Needle Valve
Size Threaded Socket Price S/R Thread Price
Globe Pattern 1
⁄4" 5591-002C 5592-002C $51.85 – 3
⁄8" 5591-003C 5592-003C 51.85 – 1
⁄2" 5591-005C 5592-005C 54.88 5591-005CSR $55.07
Angle Pattern 1
⁄4" 5691-002C 5692-002C 51.85 – 3
⁄8" 5691-003C 5692-003C 51.85 – 1
⁄2" 5691-005C 5692-005C 54.88 5691-005CSR 55.07
PP Needle Valve
Size Threaded Socket Price S/R Thread Price
Globe Pattern 1
⁄4" 5591-002P – $48.51 – 3
⁄8" 5591-003P – 48.51 – 1
⁄2"– – 5591-005PSR $53.65
Angle Pattern 1
⁄4" 5691-002P – 48.51 – 3
⁄8" 5691-003P – 48.51 – 1
⁄2"– – 5691-005PSR 53.65
Quick Spec
n Chemical & Corrosion Resistant PVC,
CPVC or PP Construction
n Precision Metering Chamber
n Globe & Angle Body Configurations
n Removable Bonnet For Easy
Disassembly & Cleaning
n Solid PTFE Stem Seal - No Elastomer
Seal or Lubricants Used
n Built-in Panel or Bracket Mounting Nut
n Easy-Grip Polypropylene Handle
n PVC & CPVC Pressure Rated to 235
psi @ 73°F Polypropylene Pressure
Rated to 150 psi @ 73°F
VBS
Cv Values
 Size Globe Pattern Angle Pattern
 1
⁄4" - 3
⁄8" .310 .426
 1
⁄2" .62 .78
Gallons per minute at 1 psi pressure drop.
FEATURES – PVC, CPVC & PP
Needle Valves provide proportional opening
to needle travel for more accurate metering
applications and other fine adjustment flow
control applications. PTFE seal eliminates
elastomer type seals or O-rings that can contribute
to chemical
compatibility problems.
Quick Spec
n Body Materials: Grade 1 Type 1 PVC
n Variable Thickness Sleeve: EPDMh2
n Pipe Connections: 1
⁄2" NPT, true union connectors
n Compressed Air Connection: 1
⁄8" FNPT
n Compressed Air Requirement, EPDMh2: 45 PSI over
media pressure
n Compressed Air Requirement, FKM: 50 PSI over media
pressure
n Cv factor: This is a full port valve design
n Dimensions: Length – Body only is 25
⁄8", overall with
threaded ends is 47
⁄8", Width – Diameter is 2"
Series HSA High Cycle Life
Air Operated Pinch Valve FEATURES
n Breakthrough variable thickness sleeve design eliminates
twisting and tearing of the pinch element.
n EPDMh2 Sleeve tested to over 1,000,000 cycles in laboratory
conditions.
n Sleeve design is ideal
for slurries, chemicals, and high purity applications.
n High flow rate and bubble tight shutoff: A high-performance,
clean and affordable alternative to air-operated
diaphragm valves and ball valves.
n True union connections for easy installation and maintenance.
n No metal parts; safe for corrosive environments.
 PVC CPVC Natural Polypro PVDF
Size Item # Price Item # Price Item # Price Item # Price
1
⁄2" HSA050EP2T-PV $196.39 HSA050EP2T-CP $237.26 HSA050EP2T-PP $216.33 HSA050EP2T-PF $309.02 3
⁄4" HSA075EP2T-PV 196.39 HSA075EP2T-CP 237.26 HSA075EP2T-PP 216.33 HSA075EP2T-PF 309.02
1" HSA100EP2T-PV 259.19 HSA100EP2T-CP 319.00 HSA100EP2T-PP 289.10 HSA100EP2T-PF 408.73
Note: Part numbers are for threaded connections. For socket connections, change the "T" to "S"; example HSA050EP2S-PV.
Price is the same. Color of the Natural Polypro material differs from illustration.
Breakthrough EPDMh2 Elastomer
PATENT PENDING SLEEVE DESIGN
Additional body materials available PVC, CPVC, PP and PDF.
3
⁄4" and 1" also available.
Needle Valves
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 43
43_43 3/30/14 10:02 AM Page 43
Valves
Series “ARV” Thermoplastic Air Release Valve
Series ARV is a normally-open valve. Until
your system is pressurized, the valve is simply
open, and air is present. As pressure builds
within the system, unwanted air is forced to the
highest point in the system, i.e., the normallyopen
air release valve. When pressure within
the system exceeds atmospheric pressure, air
is expelled. As liquid rises, the poppet becomes
buoyant and eventually closes. (Note, minimum
specific gravity of liquid must be .9 or
higher). It is possible that trace amounts of
air will remain in the system, depending on the rapidity with which the valve closes. It is also
likely that some trace amounts of process liquid will be emitted. At system pressure of 10 PSI
(with EPDM elastomer), the poppet will seal bubble-tight against the orifice. When pressure
and liquid level drop, the valve will automatically re-open.*
n Safety: Allows safe expulsion of unwanted air in piping system.
n Minimum Closing Pressure: Closes at 0 PSI, as long as liquid is present. Valve closes as liquid
rises, after virtually all unwanted air is forced out. Seals bubble-tight at system pressures as low
as 10 psi (EPDM seals).
n Superior Design: Poppet seals
more reliable than ball design;
does not deform under pressure
like a hollow ball.
 Pipe A B C
Item # NPT Seals in. mm in. mm in. mm Price
PVC ARV050VT-PV 1⁄2" Viton 5.3 130 1.9 48 2.8 72 $172.18
ARV050EPT-PV 1⁄2" EPDM 5.3 130 1.9 48 2.8 72 168.15
ARV075VT-PV 3⁄4" Viton 5.3 130 1.9 48 2.8 72 172.18
ARV075EPT-PV 3⁄4" EPDM 5.3 130 1.9 48 2.8 72 168.15
ARV100VT-PV 1" Viton 4.7 120 1.9 48 2.8 72 172.18
ARV100EPT-PV 1" EPDM 4.7 120 1.9 48 2.8 72 168.15
CPVC ARV050VT-CP 1⁄2" Viton 5.3 130 1.9 48 2.8 72 189.43
ARV050EPT-CP 1⁄2" EPDM 5.3 130 1.9 48 2.8 72 185.55
ARV075VT-CP 3⁄4" Viton 5.3 130 1.9 48 2.8 72 189.43
ARV075EPT-CP 3⁄4" EPDM 5.3 130 1.9 48 2.8 72 185.55
ARV100VT-CP 1" Viton 4.7 120 1.9 48 2.8 72 189.43
ARV100EPT-CP 1" EPDM 4.7 120 1.9 48 2.8 72 185.55
Available in Geon® PVC and Corzan® CPVC
ARV (series) 050 (size) EP (material) T (threaded) - PV (body material).
Part numbers shown are EPDM seals with PVC bodies.
Note: All three sizes are based on the 1" valve; the 1
⁄2"
and 3
⁄4" sizes use reducing bushings.
– For Viton seals, change “EP” to “V” (ARV050VT-PV).
– For Corzan CPVC body, change “-PV” to “-CP” (ARV050VT-CP).
– Standard connections are threaded. For socket connection,
change “T” to “S” after seal material (ARV050EPS-PV)
– For spigot or other connection types, consult factory.
Self-Guided Poppet Assures Dependable, Repetitive Operation
*Ask for proper installation instructions.
Automatic metering flow control valves de signed to maintain a
constant flow with changes in inlet pressure from 15 psi to 120
psi. No metals in contact with the liquid.
IMPORTANT: These flow controls are de signed for liquids similar
in viscosity to water. All applications should be tested for flow
char ac ter is tics and chemical compatibility to insure desired results.
Swelling of the di a phragms in certain liquids will result in loss of
flow rate accuracy. An in-line strainer or filter should be installed
before the flow control when suspended solids are present, and
for all applications below 1.0 GPM.
ACCURACY: The rated output of Series
“FC” flow controls will vary ± 15% with EPDM.
 PipeFlow** EPDM Seals
 (NPT) Rates(GPM) Item # Price
 1
⁄4 1
⁄4-2 FC025EP1
⁄4-2PV $101.22
 3
⁄8 1
⁄4-2 FC037EP1
⁄4-2PV 94.62
 1
⁄2 1
⁄4-2 FC050EP1
⁄4-2PV 94.62
 3
⁄4 3-8 FC075EP3-8PV 107.83
 3
⁄4 9-16 FC075EP9-16PV 323.44
 3
⁄4 17-19 FC075EP17-19PV 365.29
 3
⁄4 20-24 FC075EP20-24PV 440.32
 1 5-8 FC100EP5-8PV 113.78
 1 9-13 FC100EP9-13PV 323.44
 1 14-16 FC100EP14-16PV 323.44
 1 17-19 FC100EP14-19PV 365.29
 1 20-24 FC100EP20-24PV 440.32
**Listed flow rates are ranges only. Other materials and sizes available,
consult sales office. Specify flow rate when ordering. Up to 3” available!
Flow Con trol Valve
Degassing Valve for Continuous Automatic Venting
FEATURES
n Reduces replacement costs – no internal or external
metal components; ideal for aggressive environments.
n Placed at the high point of a piping system, this
innovative valve will vent gas as it occurs. A unique
float/actuating lever allows the vent orifice to open
when gas is present. After gas vents, liquid forces the
vent to close. Whenever gas accumulates, the valve will
re-open until the gas is vented.
n All-plastic construction designed for sodium
hypochlorite, ozone systems, or any liquids prone to outgassing.
n Series DGV is designed for systems that continuously generate trace amounts of gasses. For system
start-up requiring rapid expulsion of larger volume of air or gasses, see Series ARV.
Quick Spec
n Body Materials Available: PVC or CPVC
n Elastomers: FKM (Viton) or EPDM
n Additional Wetted Material: Natural Polypropylene
n Maximum Operating Pressure: 100 psi
n Minimum Specific Gravity: 0.9
n Dimensions: 41
⁄4" high x 21
⁄4" diameter
n System Connection: Valve must be oriented vertically as
illustrated above.
Specifications and Dimensions subject to change.
Patent Pending
All Plastic Design
EPDM Viton®
Material Pipe Size Item # Price Item # Price
PVC 1
⁄2" DGV050EP-PV $276.94 DGV050V-PV $280.05
CPVC 1
⁄2" DGV050EP-CP 338.93 DGV050V-CP 342.04
Natural Polypro 1
⁄2" DGV050EP-PP 301.72 DGV050V-PP 306.92
PVDF 1
⁄2" DGV050EP-PF 649.98 DGV050V-PF 655.15
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 44
44_44 3/30/14 10:03 AM Page 44
Hose x Hose Female Thread
x Female Thread
Hose x Male Thread
Male Thread
x Male Thread
Female Thread
x Male Thread
Hose
x Female Thread
Labcock Laboratory and Specialty Valve
This versatile, quarter-turn shut off valve is ideally suited for a variety of laboratory, system
monitoring and OEM applications. Available in IPS sizes 1
⁄4" and 3
⁄8" with choice of socket or
thread end connectors. Optional 1
⁄4" valve & adapter kit provides multiple combinations of
tubing and male pipe thread connections.
 O-ring
 Item Size Material Item # Price
 PVC Lab Valve Threaded 3
⁄8" EPDM 1521-003 $19.91
 PVC Lab Valve Socket 3
⁄8" EPDM 1522-003 19.87
 CPVC Lab Valve Threaded 3
⁄8" EPDM 1521-003C 24.16
 CPVC Lab Valve Socket 3
⁄8" EPDM 1522-003C 24.33
 PVC Lab Valve with Adapter Kit 1
⁄4" EPDM 1529-002 19.91
 CPVC Lab Valve with Adapter Kit 1
⁄4" EPDM 1529-002C 23.93
 Item # De scrip tion Price
1076002 1
⁄4" FPT x FPT Labcock $11.82
1077002 1
⁄4" MPT x MPT Labcock 11.82
1078002 1
⁄4" MPT x Hose Labcock 11.82
1079002 1
⁄4" Hose x Hose Labcock 11.82
1080002 1
⁄4" MT x FT Labcock 11.82
1082002 1
⁄4" FPT x Hose Labcock 11.82
Quick Spec
n Multi-functional 1
⁄4" lab valve with
adapter kit
n Chemical and corrosion resistant PVC or
CPVC construction
n EPDM O-ring seals
n High-impact polypropylene handle
n Teflon® ball seats
n Full 150 psi pressure rating
n Suitable for vacuum service
n Individual 1
⁄4" and 3
⁄8" specialty valves
Quick Spec
n PVC body
n Rated at 120° F up to 150 PSI
Water non-shock
n Corrosion resistant thermoplastic con struction
n 1
⁄4-turn operation
n Calibrated flow indicator
n Vacuum rating 29.9 Hg
n Choice of models makes all combinations of
hose or thread connections possible
n Perfect for laboratory use. Also for process
control monitoring or sampling
n Lever-type handle for ease of adjustment
Valves
Complete Kit
Shown!
Complete Kit
Shown!
Webb Price Only $
11 82
 Seal End Maximum Opening Approx. Water GPM
 Item # Material Conn. A B C Pressure Diameter CV @ 10 PSI Price
 PP6944F4FB BUNA 1
⁄4" F.N.P.T. .938 2.02 1.44 125 .438 6 17 $5.58
 PP6944F4FE EPDM 1
⁄4" F.N.P.T. .938 2.02 1.44 125 .438 6 17 5.58
 PP6944F4FF VITON 1
⁄4" F.N.P.T. .938 2.02 1.44 125 .438 6 17 6.42
 PP6936F6FB BUNA 3
⁄8" F.N.P.T. .938 2.02 1.44 125 .562 8 25 5.99
 PP6936F6FE EPDM 3
⁄8" F.N.P.T. .938 2.02 1.44 125 .562 8 25 5.99
 PP6936F6FF VITON 3
⁄8" F.N.P.T. .938 2.02 1.44 125 .562 8 25 6.91
 PP6858F8FB BUNA 1
⁄2" F.N.P.T. 1.125 2.50 1.75 125 .625 10 34 6.42
 PP6858F8FE EPDM 1
⁄2" F.N.P.T. 1.125 2.50 1.75 125 .625 10 34 6.42
 PP6858F8FF VITON 1
⁄2" F.N.P.T. 1.125 2.50 1.75 125 .625 10 34 6.76
 PP68712F12FB BUNA 3
⁄4" F.N.P.T. 1.125 2.75 1.75 125 .812 17 56 7.30
 PP68712F12FE EPDM 3
⁄4" F.N.P.T. 1.125 2.75 1.75 125 .812 17 56 7.30
 PP68712F12FF VITON 3
⁄4" F.N.P.T. 1.125 2.75 1.75 125 .812 17 56 7.67
Quick Spec
n The 685/687 series polypropylene check valve operates
in any position, horizontal or vertical.
n Standard cracking pressure less than 1psi with a maximum
operating pressure of 125psi and a maximum operating
temperature of 140°F.
n Buna-N seals standard, ethylene propylene or
fluroelastomer seals available.
n Easily disassembled for repair or replacement of seals.
n Stainless steel spring, with guided propylene poppet.
Hastelloy springs available.
SMC Polypropylene Check Valves
Black polypropylene is standard. Please specify white polypropylene if needed.
From Only
$
558
Hi-strength PVC check valves. Operates in any position. Mix 426 Series PVC Check Valves
or match end combinations. Guided teflon ball and Quad ring
seat. Cracking pressure 1 p.s.i., with a maximum operating
pressure of 125 p.s.i. and a maximum operating temperature
of 140°F. Buna-N seals standard, ethylene propylene or
fluroelastomer seals available.
 Item # End Conn. End Conn. PVC-All Ends
 PVC4262F2FB 1
⁄8" F 1
⁄8" F $6.55
 Maximum operating pressure: 125 psi
 Maximum operating temperature: 140°F
 PVC4264F4FB 1
⁄4" F 1
⁄4" F 6.55
 Maximum operating pressure: 125 psi
 Maximum operating temperature: 140°F
 PVC4264M4MB 1
⁄4" M 1
⁄4" M 6.55
 Maximum operating pressure: 125 psi
 Maximum operating temperature: 140°F
 PVC4264F4MB 1
⁄4" F 1
⁄4" M 6.55
 Maximum operating pressure: 125 psi
 Maximum operating temperature: 140°F
 PVC4264B4BB 1
⁄4" BARB 1
⁄4" BARB 6.55
 Maximum operating pressure: 125 psi
 Maximum operating temperature: 140°F
 PVC4266B6BB 3
⁄8" BARB 3
⁄8" BARB 6.55
 Maximum operating pressure: 125 psi
 Maximum operating temperature: 140°F
 PVC4268B8BB 1
⁄2" BARB 1
⁄2" BARB 6.52
 Maximum operating pressure: 125 psi
 Maximum operating temperature: 140°F
Special handles, special ends and other seals available on most SMC valves
at additional cost. Please consult sales office for more information.
Code Identification
 F – F.N.P.T. Female
 M – M.N.P.T. Male
 CJ – Compression ”JACO“
 CJG – Compression ”John Guest“
 1
⁄4" QEST – 3
⁄8" O.D. Tube (1
⁄4" Nominal CTS)
 3
⁄8" QEST – 1
⁄2" O.D. Tube (3
⁄8" Nominal CTS)
 1
⁄2" QEST – 5
⁄8" O.D. Tube (1
⁄2" Nominal CTS)
 CTS – Copper Tube Size (Inside Diameter)
F.N.P.T. to F.N.P.T.
M.N.P.T. to M.N.P.T.
M.N.P.T. to F.N.P.T
Webb Price Only
$
6 55
BARB to BARB
A B
Dimensions: C
VALVE & ADAPTERS INCLUDES:
n Threaded 1
⁄4" Valve
n O-ring Sealed 1
⁄4" MPT x Mipt Adapters
n EPDM or FKM O-rings (AS568-103 size)
n End Connector Wrench
n O-ring Sealed 1
⁄4" MPT x 3
⁄8" I.D. Tubing Barb Adpaters OR
n O-ring Sealed 1
⁄4" MPT x 1
⁄4" I.D. Tubing Barb Adpaters
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 45
45_45 3/30/14 10:06 AM Page 45
 Seat 3
⁄4" 1" 1 1
⁄2" 2" 21
⁄2" 3" 4" 6" 8"
 EPDM 2.8 5.0 5.0 5.0 5.0 5.7 5.7 6.4 6.4
 Teflon 5.0 8.5 8.5 8.5 8.5 8.5 9.2 10.0 10.0
Minimum Back Pressure Required to Close Valve (psi)
Series CKM
Molded Normally
Closed Check
Valve
Normally closed leak-proof check
valves to prevent reverse flow of
extremely corrosive and ultrapure
liquids. Will check in any
position. The series “CKM” check
valves utilize a normally closed
design which is entirely automatic
in action.
OPTIONS
n PTFE Seat and FKM Seal
n External lever and weight to
assist disc in closing faster
Pipe Size PVC CPVC Polypropylene PVDF
 (NPT) Item # Price Item # Price Item # Price Item # Price
 1
⁄2” CKM050EP-PV $74.88 CKM050EP-CP $78.92 CKM050EP-PP $83.35 CKM050EP-PF $113.93
 1
⁄2” CKM050V-PV 63.37 CKM050V-CP 81.72 CKM050V-PP 85.31 CKM050V-PF 115.79
 3
⁄4” CKM075EP-PV 74.73 CKM075EP-CP 91.00 CKM075EP-PP 93.96 PMCK075EP-PF 190.08
 3
⁄4” CKM075V-PV 77.81 CKM075V-CP 94.72 CKM075V-PP 96.91 PMCK075V-PF 192.92
 1” CKM100EP-PV 88.11 CKM100EP-CP 102.15 CKM100EP-PP 105.40 PMCK100EP-PF 243.61
 1” CKM100V-PV 91.13 CKM100V-CP 105.86 CKM100V-PP 108.38 PMCK100V-PF 246.25
EP = EPDM V = Viton
For socket connector specify "S" in part number (ex. CKM050VSVCP). For threaded end connector
specify "T" in part number (ex: CKM050VTVCP). No additional charge.
 PVC PP PVDF
 Size Item # Price Item # Price Item # Price
 3
⁄4" 1201007 $316.13 1202007 $382.63 1203007 $711.84
 1" 1201010 364.10 1202010 434.96 1203010 1,128.26
 11
⁄2" 1201015 454.58 1202015 547.24 1203015 1,627.51
 2" 1201020 561.41 1202020 676.96 1203020 2,204.19
 21
⁄2" 1201025 782.60 1202025 948.38 1203025 2,916.86
 3" 1201030 837.20 1202030 1,070.48 1203030 3,185.29
 4" 1201040 1,191.48 1202040 1,531.60 1203040 4,927.27
This valve is available in sizes up to 8", consult sales office.
Series CKS Self Closing Check
Valves in Sizes 11
⁄2", 2" and 3"
Pipe Size PVC CPVC Polypropylene PVDF
 (NPT) Item # Price Item # Price Item # Price Item # Price
 11
⁄2" CKS150V-NC-PV $155.29 CKS150V-NC-P $299.07 CKS150V-NC-PP $203.17 CKS150V-NC-PF $540.06
 11
⁄2" CKS150EP-NC-PV 150.31 CKS150EP-NC-P 294.32 CKS150EP-NC-PP 198.78 CKS150EP-NC-PF 536.58
 2" CKS200V-NC-PV 204.97 CKS200V-NC-P 345.08 CKS200V-NC-PP 242.21 CKS200V-NC-PF 613.23
 2" CKS200EP-NC-PV 200.00 CKS200EP-NC-P 340.34 CKS200EP-NC-PP 237.29 CKS200EP-NC-PF 609.74
 3" CKS300V-NC-PV 404.07 CKS300V-NC-P 894.84 CKS300V-NC-PP 395.81 CKS300V-NC-PF 1,359.54
 3" CKS300EP-NC-PV 367.86 CKS300EP-NC-P 862.33 CKS300EP-NC-PP 392.32 CKS300EP-NC-PF 1,356.05
 4" CKS400VT-NC-PV 752.31 CKS400VT-NC-CP 1,430.77 Call for Pricing
 4" CKS400EPT-NC-PV 729.23 CKS400EPT-NC-CP 1,407.69 Call for Pricing
Socket standard, for threaded end connectors specify “T” in part number (ex. CKS150VTNCPV).
EP = EPDM, V = Viton
As Low As
$
150 31
As Low As
$
31613
Quick Spec
n Normally closed design, self-sealing, not dependent upon gravity, mounting position or
reverse flow.
n Teflon® PFA encapsulated stainless steel spring provides bubble-tight seal mounted in any position.
n Rapid closure by spring-loaded poppet helps to eliminate sudden back-flow water hammer.
n Positive repetitive sealing: poppet automatically positions itself against seat in the identical
location each time for long cycle life dependability.
n Minimal Cracking Pressure: Valve begins to open at approximately 1.0 to 1.5 PSI.
Quick Spec
n May be installed in hor i zon tal or in vertical lines
n Top entry valve facilitates cleaning without removing from line
n All sizes rated for vacuum service
Horizontal Swing Check Valve
Provides superior performance!
Valves
Prevent reverse flow of extremely corrosive and ultra-pure liquids!
PVC In-Line Adjustable Spring Check Valves
Quick Spec
n Pressure rating: 200 psi @ 73°F.
n Maximum service temperature: PVC = 140°F.
n Temperature/pressure de-ratings apply.
n 2 - 14 lbs. adjustable spring tension (5 to 32 feet of head).
n Factory preset to approximately 5 psi (12 feet of head).
n Each full turn of adjustment nut = 1 psi (2.3 feet of head).
n Stainless Steel adjustment hardware, EPDM seat.
Not for use with compressed air or gas.
Fipt x Mipt
Fipt x Fipt Mipt x Fipt
 Size Item # Description Price
 1
⁄2" S1102-05 Standard Unit – Female Inlet x Male Outlet (Fipt x Mipt) $7.79
 3
⁄4" S1102-07 Standard Unit – Female Inlet x Male Outlet (Fipt x Mipt) 7.96
 1" S1102-10 Standard Unit – Female Inlet x Male Outlet (Fipt x Mipt) 13.23
 1
⁄2" x 3
⁄4" S1102-05-07 Standard Unit – Female Inlet x Male Outlet (Fipt x Mipt) 8.39
 1
⁄2" S1101-05 Male Inlet x Female Outlet (Mipt x Fipt) 7.79
 3
⁄4" S1100-05 Female Inlet x Female Outlet (Fipt x Fipt) 8.22
FLOW
Starting At
$
6337
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 46
46_46 3/30/14 10:07 AM Page 46
True Union 2000 Industrial Ball Check Valve
True Union Ball Check Valve
Y-Check Valve Type 304 n Excellent flow characteristics
n Minimum pres sure loss
n Mount horizontally or ver ti cal ly
n Ef fi cient at low working pressures
OPTIONS
n Spring loaded ball to assist ball in seating
faster
n Foot Valve – The Asahi Ball Check Valve
may be ordered with high impact, rigid
PVC screen assembly which will screen
out foreign matter
n PVC, CPVC, Polypropylene, PVDF bodies
n PVC & CPVC 1
⁄2"-2" include both Socket &
Threaded end connectors
n Flanged ends available
n 3" and 4" NOW available
 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
PVC Body EPDM Seal Material
192304006 $37.11 192304007 $44.15 192304008 $52.26 192304009 $67.16 192304010 $92.56 192304011 $134.79 192304013 $314.29
Viton Seal Material
192304031 44.73 192304032 54.28 192304033 63.34 192304034 83.99 192304035 132.40 192304036 186.08 192304038 365.03
 1
⁄2" 3
⁄4" 1" 1 1
⁄2" 2"
 Item # Price Item # Price Item # Price Item # Price Item # Price
PVC Body
 EPDM Seals 1210005 $27.14 1210007 $39.58 1210010 $39.58 1210015 $64.08 1210020 $90.10
 Viton® Seals 1213005 34.39 1213007 42.97 1213010 56.96 1213015 105.54 1213020 132.67
CPVC Body
 EPDM Seals 1216005 38.47 1216007 47.01 1216010 55.57 1216015 97.09 1216020 131.15
 Viton® Seals 1219005 43.34 1219007 53.12 1219010 62.45 1219015 127.54 1219020 158.21
Foot Valve Screen Kits
 1
⁄2" 3
⁄4" 1" 11
⁄2" 2" 3" 4"
 Item# Price Item# Price Item# Price Item# Price Item# Price Item# Price Item# Price
PVC 3154005 $16.92 3154007 $18.70 3154010 $22.25 3154015 $33.83 3154020 $39.17 3154030 $85.48 3154040 $162.02
CPVC 3155005 19.24 3155007 20.99 3155010 27.12 3155015 40.25 3155020 50.74 3155030 117.20 3155040 244.89
PP 3156005 30.75 3156007 26.23 3156010 35.27 3156015 47.03 3156020 56.07 3156030 85.90 3156040 152.82
PVDF 3158005 43.84 3158007 40.26 3158010 50.10 3158015 89.45 3158020 117.19 3158030 275.50 3158040 668.18
Quick Spec
n Pressure rating @ 73°F water:
1
⁄2" - 2" 235 psi, 21
⁄2" - 6" 150 psi
n Maximum service temperature:
PVC = 140°F, CPVC = 200°F
(Pressure deratings apply)
n Rated for vacuum service
n All valves assembled with siliconefree,
water soluble lubricant
n Stainless Reinforced Thread Available
n Spigot & Flange Ends Available
n 1
⁄2" through 8" not all shown
Quick Spec
n True Union design elim i nates the need
for flanges and permits installation and
repair without expanding the pipeline
n Uniseat/Seal of EPDM or Viton
n May be used either vertically
or hor i zon tal ly
n Minimum shut off is 5 psi
n All sizes rated for full vacuum service
Quick Spec
n Size Range: ½" - 4"
n Materials: PVC, CPVC, PP & PVDF
n Interchangeability: Mounts to New and Existing Ball
Check Valves
Valves
Sizes 1
⁄2
" - 2"
Now Includes Both
Socket & Threaded
End Connectors
with Each Valve
FEATURES & BENEFITS
n Lighter Weight
n Lower Profile
n Injection Molded Construction
n No fabricated parts
n Simple structure for easy maintenance
n Sold in 2-piece “kit”
form consisting of a
union nut & screen
All Foot Screen Kits Include Screen and Union Nut
Socket & Thread End
 Size PVC / EPDM PVC / FKM PVC Thrd EPDM / Stainless Ring CPVC / EPDM CPVC / FKM CPVC Thrd EPDM / Stainless Ring
 ½ 4529-005 $28.66 4539-005 $32.30 4521-005SR $29.25 4529-005C $44.67 4539-005C $49.73 4521-005CSR $45.27
 ¾ 4529-007 34.18 4539-007 36.08 4521-007SR 35.58 4529-007C 53.47 4539-007C 59.42 4521-007CSR 54.93
 1 4529-010 40.65 4539-010 45.32 4521-010SR 42.03 4529-010C 63.09 4539-010C 70.08 4521-010CSR 64.54
 1¼ 4529-012 59.36 4539-012 66.67 4521-012SR 62.13 4529-012C 108.65 4539-012C 120.62 4521-012CSR 111.55
 1½ 4529-015 68.18 4539-015 75.67 4521-015SR 72.63 4529-015C 108.65 4539-015C 120.62 4521-015CSR 111.55
 2 4529-020 93.09 4539-020 103.51 4521-020SR 97.89 4529-020C 145.13 4539-020C 161.70 4521-020CSR 150.20
 4 4522-040 409.22 4532-040 431.16 4521-040SR 423.11 4522-040C 645.09 4532-040C 717.22 4521-040CSR 659.73
 6 4522-060 804.74 4532-060 891.87 4521-060SR 827.71 4522-060C 1,331.85 4532-060C 1,479.65 4521-060CSR 1,367.76
 8 4522-060 1,072.44 4532-060 1,188.79 4522-060C 1,566.90 4532-060C 1,972.31
Socket (4522-4532-) Threaded (4521-4531-) Sizes Over 2" (EPDM- FKM-) respectfully. Spigot (4527-4537-), Flanged (4523-4533) All Sizes (EPDM- FKM-)
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 47
47_47 3/30/14 10:09 AM Page 47
Series EASYMT & EASMT, PTFE Bellows Direct Acting Solenoid Valve
(WITH Z COOL DIN CONNECTOR
OR RECTIFIED COIL)
Specifications and Model Numbers: Series EASYMT & EASMT (molded)
Series EASYMT & EASMT Teflon Bellows Molded Direct Acting Solenoid Valves
Unique “All Purpose”" 2-Way Solenoid Valve
 AC COILS DC COILS
 Max. Inlet Max. Back Max. Inlet Max. Back
 Pipe Orifice Pressure Pressure Pressure Pressure Molded Body
 Size Size in. Watts CV PSI PSI CV PSI PSI FKM
 1
⁄4 .375 20 1.1 140 38 1.1 70 19 EASYMT2V12W24
 1
⁄2 .375 20 1.1 140 38 1.1 70 19 EASYMT4V12W24
 1
⁄2 .375 20 2.1 125 18 1.6 60 18 EASMT4V12W24
 3
⁄4 .470 20 3.1 58 17 2.2 25 17 EASMT5V16W24
 1 .656 20 4.6 15 12 4.0 8 8 EASMT6V22W24
 1* .452 20 3.6 25 12 2.9 13 12 EASMT6V14W24
 1
⁄2 .375 58 2.3 140 38 NA NA NA
 3
⁄4 .470 58 3.4 120 34 NA NA NA
 1 .656 58 4.7 70 34 NA NA NA
* This is an optional version of the 1" valve where the design has been modified to allow higher inlet
pressure at the sacrifice of lower CV.
Quick Spec
n Unique Design: PTFE Bellows barriertype
dynamic seal prevents leaking of
fugitive emissions to the atmosphere.
n Versatility: For use with virtually
every type solution, including acids,
caustics, solvents, chlorine solutions and
ultra-pure liquids.
n Superior Performance: Over 2 million
cycles in laboratory conditions.
n Dependability and Safety: Patented Fail
Dry® design provides visual warning if
seal malfunctions. Avoids costly shutdown,
as valve continues to function.
n New W24 Solenoid Coil with Z-Cool
DIN Connector uses a fraction of the
energy required by traditional coils.
Optional R24 coil available.
n Rated Continuous Duty with maximum
ambient temperature of
122°F/50°C.
n Coil Connector Light: Indicates when
valve is energized (open). Standard on
W24 coil.
n Corrosion Resistant: Rugged thermoplastic
construction is resistant to
both internal and atmospheric corrosion.
No metal parts in wetted areas.
Available in PVC, CPVC, Polypropylene
and PVDF.
n Exacting Quality: All valves individually
inspected and 100% tested to
insure reliable operation.
Valves
Starting At
$
33416
Series SWT Pressure Switch
Item # Body Pipe Size Seals Amperage Price
SWT050T16A-PV PVC 1
⁄2" Teflon 16 $346.84
SWT050T25A-PV PVC 1
⁄2" Teflon 25 358.92
SWT050T3A-PV PVC 1
⁄2" Teflon 3 403.91
n Non-Wetted Parts PVC, Viton, Stainless Steel, Ethylene Propylene Rubber, Nylon, Buna-Nitrile
n Operating Pressure 3 Ranges: 15-50 PSI, All three springs are in 50-100 PSI,
100-150 PSI according to the spring installed. All three springs are included, the middle
range (50-100) is installed by the factory unless otherwise specified
n Pressure Rating Maximum 150 PSI @ 70°F
n Standard Switch 16 Amps @ 125 VAC, 1
⁄2 HP; 6 Amps @ 250 VAC, 1
⁄2 HP.
n Rating UL Recognized and CSA Approved
Quick Spec
n PVC body, 1
⁄2" NPT connection.
n Used to signal equipment when pressure in a piping
system either rises or falls to a set pressure.
n NEMA 4X design and patented Fail-Dry® enhance
system safety.
n Plastic cord grip and 18" cable simplify installation.
n Tested to 1,000,000 cycles in laboratory conditions.
n PTFE diaphragm with no wetted metals or elastomers is ideal for ultra-pure liquids.
n Versatile snap-action 16 Amp/3 terminal switch is standard; 25 Amp and low deadband
3 Amp switches optional.
Quick Spec
n ¼" to 1½" Sizes Pressures to 100 psi
n A 3-way air solenoid valve connected to the 1
⁄8 NPT
port is required to actuate the diaphragm valve.
n When air pressure (40 to 100 PSI or 2 to 7 Bars)
is applied, the diaphragm valve opens and when
removed spring force closes the valve. Body material
available in PVC, CPVC, Natural Polypro, PTFE,
and PVDF
As Low As
$
346 84
Series BSDA Automatic Shutoff Valve with
PTFE Diaphragm
FEATURES:
n Unique PTFE wetted diaphragm provides the
ultimate in purity and chemical resistance.
n Compact – light in weight.
n Can be mounted in any position.
n Million-cycle, non-sticking design
n Normally-closed design provides bubbletight
shut off in the event of air or electrical
failure.
n Patented Fail-Dry® safety design warns of seal
failure; permits valve to continue operating.
Pipe Size Orifice Size PVC Price CPVC Price GPP Price PVDF Price
Series EASYMT PTFE Bellows With 24 Watt Coil – Continuous Duty / Z-Cool DIN
 ¼ 3
⁄8 EASYMT2V12W24-PV $436.62 EASYMT2V12W24-CP $468.06 EASYMT2V12W24-PP $473.59 EASYMT2V12W24-PF $504.93
 ½ 3
⁄8 EASYMT4V12W24-PV 443.08 EASYMT4V12W24-CP 488.31 EASYMT4V12W24-PP 494.77 EASYMT4V12W24-PF 519.70
Series EASMT PTFE Bellows With 24 Watt Coil – Continuous Duty / Z-Cool DIN
 ½ 3
⁄8 EASMT4V12W24-PV 466.16 EASMT4V12W24-CP 494.77 EASMT4V12W24-PP 499.39 EASMT4V12W24-PF 541.85
 ¾ ½ EASMT5V16W24-PV 489.24 EASMT5V16W24-CP 519.70 EASMT5V16W24-PP 526.16 EASMT5V16W24-PF 572.31
 1* 11⁄16 EASMT6V22W24-PV 532.62 EASMT6V22W24-CP 557.59 EASMT6V22W24-PP 562.16 EASMT6V22W24-PF 612.00
Series EASYMT PTFE Bellows With 24 Watt Coil – Continuous Duty Rectified (without Z-Cool)
 ¼ 3
⁄8 EASYMT2V12R24-PV 334.16 EASYMT2V12R24-CP 342.62 EASYMT2V12R24-PP 371.88 EASYMT2V12R24-PF 402.46
 ½ 3
⁄8 EASYMT4V12R24-PV 386.72 EASYMT4V12R24-CP 417.34 EASYMT4V12R24-PP 396.93 EASYMT4V12R24-PF 417.23
Series EASMT PTFE Bellows With 24 Watt Coil – Continuous Duty Rectified (without Z-Cool)
 ½ 3
⁄8 EASMT4V12R24-PV 363.70 EASMT4V12R24-CP 392.31 EASMT4V12R24-PP 396.93 EASMT4V12R24-PF 439.39
 ¾ ½ EASMT5V16R24-PV 386.72 EASMT5V16R24-CP 417.24 EASMT5V16R24-PP 423.69 EASMT5V16R24-PF 469.86
 1* 11⁄16 EASMT6V22R24-PV 430.16 EASMT6V22R24-CP 455.08 EASMT6V22R24-PP 475.70 EASMT6V22R24-PF 509.54
NOTES: 1) Model numbers listed are for Viton seals. For EPDM seals change “V” to “EP”. Price is the same.
Example: For “EP” seals change EASYMT1V12W20PV to EASYMT1EP12W20PV.
2) Model # shown with W24 water and dust tight 24 watt coils with Z-Cool DIN connector or R24 water and dust tight 24 watt coils.
* Modified design to allow a higher inlet pressure from 15 to 25 psi at the sacrifice of lower Cv. No additional charge change 22 to 14 in the part number.
3) Not Recommended for use with pressurized dry chlorine gas: vacuum to 30 Hg only.
Pipe Size Orifice Size PVC Natural Polypropylene
¼ 5
⁄16 BSDA025T-NC-PV $228.77 BSDA025T-NC-PP $286.01
½ ½ BSDA025T-NC-PV 257.39 BSDA025T-NC-PP 328.47
¾ 5
⁄8 BSDA025T-NC-PV 295.23 BSDA025T-NC-PP 381.08
1 ¾ BSDA025T-NC-PV 370.91 BSDA025T-NC-PP 438.31
1½ 1¼ BSDA025T-NC-PV 485.39 BSDA025T-NC-PP 628.46
For Corrosive and Ultra-Pure Liquids
NEW
NEW
R24
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 48
48_48 3/30/14 10:10 AM Page 48
Gate Valves
This solid, proven design is well suited for
agricultural, industrial and chemical processing
applications. Spears Gate Valves are featurepacked
with a variety of end connector options.
1
⁄2" - 2" PVC Heavy Duty Gate Valves
OPTIONS
n Also available in 20mm through 63mm metric sockets or 1
⁄2" through 2" BSP threads
n PVC valves offer standard Buna-N O-rings with optional EPDM or Viton®
n 200 psi Maximum Internal Pressure Rating @ 73°F
 O-ring 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
 Material Item # Price Item # Price Item # Price Item# Price Item# Price Item# Price
PVC Threaded
 Buna-N 2011-005 $19.09 2011-007 $23.39 2011-010 $27.71 2011-012 $38.32 2011-015 $48.89 2011-020 $62.77
 EPDM 2021-005 20.98 2021-007 25.74 2021-010 30.53 2021-012 42.16 2021-015 54.30 2021-020 69.10
 Viton® 2031-005 23.07 2031-007 27.06 2031-010 33.60 2031-012 46.36 2031-015 59.12 2031-020 75.97
PVC Socket
 Buna-N 2012-005 $19.09 2012-007 23.39 2012-010 27.71 2012-012 38.32 2012-015 48.89 2012-020 62.77
 EPDM 2022-005 20.98 2022-007 25.74 2022-010 30.53 2022-012 42.16 2022-015 54.30 2022-020 69.10
 Viton® 2032-005 23.07 2032-007 27.06 2032-010 33.60 2032-012 46.36 2032-015 59.12 2032-020 75.97
 1
⁄2" 3
⁄4" 1" 11
⁄4" 1 1
⁄2" 2"
 PVC Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 Threaded 1261005 $35.38 1261007 $38.71 1261010 $62.49 1261012 $82.98 1261015 $169.91 1261020 $270.12
 Socket 1260005 35.38 1260007 38.71 1260010 62.49 1260012 82.98 1260015 169.91 1260020 270.12
 Flanged 1262005 49.50 1262007 55.68 1262010 88.20 1262012 120.71 1262015 209.31 1262020 296.21
Starting At
$
3538
From Only
$
19 09
Quick Spec
n Used for efficient, frequent throttling of
flow with a minimum of erosion to the seat
n All sizes rated for vacuum service
n Positive shutoff
n Stainless steel reinforcing ring on body of
polypropylene valve to maintain pressure
rating at higher temperature
n EPDM, Viton seals.
Quick Spec
n Pressure rating @ 73°F, water:
Full flow (open) 150 psi
Back pressure (closed) 75 psi
n Maximum service temperature: 140°F
n Temperature/pressure de-ratings apply
n EPDM seat
n Also available in clear PVC and SR
threaded – Call Webb
Quick Spec
n O-ring stem seal which eliminates the
need to retighten the stem nut.
n Specially designed sealing surface and
tapered wedge promote positive sealing and
smooth operation with minimal tightening
n Special strain-equalizing thread is used to
coupIe the stem and wedge. Reduces the
chances of stripping wedge threads in the
event of accidental over-tightening
Non-rising stem
makes this a perfect choice
when clearance is an issue!
Great for applications
requiring frequent
throttling
of flow.
Valves
Utility Swing Check Valve
Size Socket Thread Price
1
⁄2 S1520-05 S1520-05F $14.32 3
⁄4 S1520-07 S1520-07F 14.81
1 S1520-10 S1520-10F 15.41
11
⁄4 S1520-12 S1520-12F 16.03
11
⁄2 S1520-15 S1520-15F 16.94
2 S1520-20 S1520-20F 26.32
21
⁄2 S1520-25 S1520-25F 33.82
3 S1520-30 S1520-30F 48.65
4 S1520-40 S1520-40F 58.94
Spring Assisted Swing Check
True Union Utility Spring Check Valve
Size Socket Thread Price
1
⁄2 S1780-05 S1780-05F $37.52 3
⁄4 S1780-07 S1780-07F 42.56
1 S1780-10 S1780-10F 44.38
11
⁄4 S1780-12 S1780-12F 46.21
11
⁄2 S1780-15 S1780-15F 49.24
2 S1780-20 S1780-20F 51.21
21
⁄2 S1780-25 S1780-25F 91.50
3 S1780-30 S1780-30F 95.43
4 S1780-40 S1780-40F 135.43
Stainless Steel spring assisted (non-adjustable)
True Union Utility Swing Check Valve
Size Socket Thread Price
1
⁄2 S1720-05 S1720-05F $16.32 3
⁄4 S1720-07 S1720-07F 16.79
1 S1720-10 S1720-10F 17.51
11
⁄4 S1720-12 S1720-12F 18.42
11
⁄2 S1720-15 S1720-15F 20.27
2 S1720-20 S1720-20F 30.43
21
⁄2 S1720-25 S1720-25F 50.72
3 S1720-30 S1720-30F 64.76
4 S1720-40 S1720-40F 87.44
Spring Assisted Swing Check
Utility Spring Check Valve
Size Socket Thread Price
1
⁄2 S1580-05 S1580-05F $28.21 3
⁄4 S1580-07 S1580-07F 31.94
1 S1580-10 S1580-10F 33.27
11
⁄4 S1580-12 S1580-12F 34.69
11
⁄2 S1580-15 S1580-15F 36.88
2 S1580-20 S1580-20F 38.66
21
⁄2 S1580-25 S1580-25F 68.60
3 S1580-30 S1580-30F 71.56
4 S1580-40 S1580-40F 101.57
Stainless Steel spring assisted (non-adjustable)
Utility Swing & Utility Spring Check Valves
True Union Utility Swing &
Utility Spring Check Valves General Installation information:
These valves are designed for
horizontal installations, but may
be installed in up-flow only vertical
position. Valves MUST be
installed with the FLOW arrow
pointing in the direction of the
flow. Do not install valve upside
down. Flow velocity should not
exceed 5 ft./sec. Minimum opening
pressure less than 0.5 psi.
Not for use with compressed air or gas.
White PVC
White PVC
Clear PVC
Clear
Available!
Clear
Available!
Globe Valve
www.fwwebb.com/plastics
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 49
49_49 3/30/14 10:12 AM Page 49
Multipurpose Relief, By-Pass, Anti-Siphon and Back Pressure Valve with PTFE Diaphragm
PVC dispensing assemblies for distilled, deionized, demineralized water as well as chemical dispensing.
Models are available in PVC, Natural Polypropylene, and ultra pure PVDF. All tips
accept 1
⁄8" to 1
⁄2" tubing.
Liquid Dispensing Assemblies
3-Port By-Pass Version Series TRVDT
Series RVDT in-line relief valves feature a wetted flat Teflon diaphragm to resist both chemical
attack and salt crystallization problems. The large, active diaphragm provides for smooth,
chatter-free operation. A secondary u-cup seal incorporates the Plast-O-Matic patented Fail
Dry® design for added protection. If the rolling diaphragm should fail, liquid will weep
through the vent
port which is located
between the two
seals, indicating
that maintenance is
required. Because
the secondary seal
prevents liquid
from reaching the
control spring,
maintenance can
be conveniently
scheduled without
need for an emergency
shut-down.
Series RVDT & TRVDT Flow Reference Chart
 Overpressure to Reach PVC NATURAL POLYPRO
Pipe Size Indicated Flow Rate Item # Price Item # Price
 1
⁄4" .5 GPM – 5 PSI 1 GPM – 8 PSI RVDT025VPV $294.09 RVDT025VPP $295.70
 1
⁄2" 2 GPM – 8 PSI 4 GPM – 12 PSI RVDT050VPV 367.61 RVDT050VPP 369.66
 TRVDT050VPV 329.73 TRVDT050VPP 411.18
 3
⁄4" 5 GPM – 9 PSI 8 GPM – 12 PSI RVDT075VPV 418.23 RVDT075VPP 420.99
 TRVDT075VPV 372.11 TRVDT075VPP 462.93
 1" 9 GPM – 9 PSI 15 GPM – 12 PSI RVDT100VPV 514.09 RVDT100VPP 485.07
 TRVDT100VPV 426.93 TRVDT100VPP 528.79
 11
⁄2" 25 GPM – 9 PSI 50 GPM – 16 PSI RVDT150VPV 660.34 RVDT150VPP 674.17
Stainless Steel Fasteners are standard. PVDF and Teflon® available.
Quick Spec
n Relief: protects systems and equipment from over-pressure/pressure surges.
n By-Pass: prevents pumps from “dead heading”.
n Back-Pressure: maintains necessary reverse pressure in closed loop systems.
n Anti-Siphon: Used on the outlet of a pump wherever gravity or other downstream conditions
may create negative pressure (siphon) and drain a tank. The valve is pre-set to open
under pump pressure, but close when the pump is off. This valve actually closes tighter
when siphon occurs.
Valves
For Smooth,
Sensitive
Operation and
the Ultimate in
Corrosion
Resistance…
with No Wetted Elastomers!
TRVDT
FEATURES
n Top entry - easy to maintain
n Push the handle down: valve
opens, release; valve spring loaded - normally closed
n Snap Globe Valve - a different type of valve
n Easy to fill containers, like no other
chemical resistant valve
n Move the handle up - the valve is set to
hold open - until you release
n Different positions shown in literature
n Fill nozzel - optional on request
n 150 PSI ambient operating pressure 70°F
n Viton O-Rings standard
n 304 Stainless Spring Kynar coated
Plastic Snap Globe Valves- ALL PVC, POLYPROPYLENE OR PVDF 41
⁄2"
53
⁄4"
TYPE PVC Polypropylene PVDF
#15 Lab Faucet FC-DA-15D $174.74 FC-PDA-15D $217.89 FC-PDA-15D $694.48
Deck /Wall FC-DA-15W 189.74 FC-PDA-15W 249.47 FC-KDA-15W 733.69
#20 Lab Faucet FC-DA-20D 174.74
Deck /Wall FC-DA-20W 189.74
#30 Lab Faucet FC-DA-30D 194.74 FC-PDA-30D 243.15 FC-KDA-30D 652.64
Deck /Wall FC-DA-30W 198.95 FC-PDA-30W 271.58 FC-KDA-30W 698.64
#35 Lab Faucet FC-DA-35D 207.36 FC-PDA-35D 268.42 FC-KDA-35D 556.85
Deck /Wall FC-DA-35W 226.32 FC-PDA-35W 280.13 FC-KDA-35W 920.13
#00 Lab Faucet FC-DA-00D 146.32 FC-PDA-00D 183.15 FC-KDA-00D 501.09
Deck /Wall FC-DA-00W 169.47 FC-PDA-00W 196.85 FC-KDA-00W 520.93
(#15) Needle Valve, (#20) Ball Valve, (#30) Snap Valve, (#35) TU Ball Valve, (#00) No Valve
 Size PVC Polypropylene PVDF
 1
⁄4" FC-SGV-25 $215.35 FC-PSGV-25 $290.36 FC-KSGV-25 $674.19
 3
⁄8" FC-SGV-38 215.35 FC-PSGV-38 290.36 FC-KSGV-38 674.19
 1
⁄2" FC-SGV-50 215.35 FC-PSGV-50 290.36 FC-KSGV-50 674.19
CPVC Available Upon Request
RVDT
Quick Spec
n PVC and PVDF models
available
n Includes ball valve
n PVDF available with
needle valve, consult
sales office
Starting At
$
17474
The Ball Valve Type 324 is the perfect valve for use in the
laboratory. It is characterized by compact design and spacesaving
installation. It also is used for isolation of various
gauges attached to large piping systems. The Type 324 can
be dismantled from one side. The flow direction has no influence
on the positioning of the valve.
Size Item # Description Price
 1
⁄4 161324454 PVC, EPDM, PTFE Seat Thrd/Soc NPT $53.00
 1
⁄4 161324200 PVC, EPDM, PTFE Seat, Cement Socket 53.00
¼
Dimensions:
Z=1.42"
Z1=.98"
D=1.34"
L=2.36"
L1=1.77"
H=1.50"
Type 324 Laboratory Ball Cock Valve
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 50
50_50 3/30/14 10:14 AM Page 50
Series “EAST” True Blue™ Teflon® Bellows Solenoid Valve
Series LG Laboratory Faucets
 Max. Pressure PVC POLYPROPYLENE PVDF
 Pipe Orifice Inlet Outlet
 Size Size Watts CV PSI Bars PSI Bars Model No. Price Model No. Price Model No. Price
 1
⁄4 3
⁄16 11 0.5 140 9.5 90 6.1 EAST2V6W11-PV $305.07 EAST2V6W11-PP $330.17 EAST2V6W11-PF $591.23
 1
⁄2 3
⁄16 11 0.5 140 9.5 90 6.1 EAST4V6W11-PV 305.07 EAST4V6W11-PP 330.17 EAST4V6W11-PF 591.23
 1
⁄4 1
⁄4 11 0.8 70 4.8 60 4.1 EAST2V8W11-PV 305.07 EAST2V8W11-PP 330.17 EAST2V8W11-PF 591.23
 1
⁄2 1
⁄4 11 0.8 70 4.8 60 4.1 EAST4V8W11-PV 305.07 EAST4V8W11-PP 330.17 EAST4V8W11-PF 591.23
For applications requiring a
compact, cost effective and
high-pressure rated valve with
extended cycle life.
Valve Size (NPT) Valve Seals Item # Cv Price
 1
⁄2" Viton® PS050VW11-PV 5.2 $508.43
 1
⁄2" EPDM PS050EPW11-PV 5.2 493.48
 3
⁄4" Viton® PS075VW11-PV 7.6 528.37
 3
⁄4" EPDM PS075EPW11-PV 7.6 513.42
 1" Viton® PS100VW11-PV 9.5 553.29
 1" EPDM PS100EPW11-PV 9.5 533.36
 11
⁄2" Viton® PS150VW11-PV 28 767.63
 11
⁄2" EPDM PS150EPW11-PV 28 747.69
 2" Viton® PS200VW11-PV 35 847.39
 2" EPDM PS200EPW11-PV 35 827.45
 3" Viton® PS300VW11-PV 80 1,495.35
 3" EPDM PS300EPW11-PV 80 1,470.46
Pressure PSI (Bars)
Maximum Inlet @ 75°F (24°C) 140 (9.7)
Maximum Inlet @ 140°F (60°C) * 40 (2.8)
Minimum Inlet 5 (0.4)
Maximum Outlet @ 75°F (24°C) 70 (4.8)
Minimum Differential 5 (0.4)
*This rating is for PVC. For other materials Consult Sales Office.
Pilot Operated Thermoplastic Solenoid Valve... Inlet Rating 140 PSI, Back Pressure Rating To 70 PSI.
Materials of Construction:
Series PS Pilot Operated Solenoid Valves are available
in PVC and CPVC (Corzan™
), Polypropylene and PVDF (Kynar®). Consult Sales Office.
Notes: Model numbers listed are for Viton seals. For EPDM seals change "V“ to "EP“. Price is the same.
IMPORTANT: When ordering all solenoid valves, voltage must be specified. Prices listed are for 120/60 AC voltage.
Quick Spec
n Normally closed, in-line design with bubble-tight
shut-off.
n High pressures: Particularly for applications
where high back-pressures (up to
70 PSI) are required e.g. controlling flow
to spray nozzles, high pressure chemical
injections, etc. Inlet pressure to 140 PSI.
n High flow rates - Cv‘s from 5.2 on the 1
⁄2”
size to 80 on the 3” size.
n Cycle life in excess of 1,000,000 cycles.
n Versatility: Can be used with all type
solutions including acids, caustics, solvents
and chlorine solutions.
n Energy-efficient 11 watt coil.
n Molded coil and standard DIN connector;
designed to meet NEMA 4X.
n Sizes: 1
⁄2", 3
⁄4", 1", 11
⁄2", 2" & 3".
Quick Spec
n Compact Size: Only 49
⁄16” high, these valves
are ideal for limited space installations.
n Versatility: Can be used with all type solutions.
Includes acids, caustics, solvents,
chlorine solutions and ultra-pure liquids.
For pressure, drain or vacuum service.
n Energy Efficient: Molded 11 watt NEMA 4X
style coil with DIN standard connector
results in low energy consumption.
n Corrosion Resistant: wetted areas.
n Superior Performance: 2,000,000
cycle design.
n Materials of Construction: Bodies: Teflon
Bellows solenoid valve bodies are available
in PVC, Polypropylene, and PVDF
(Kynar®) Seals: Standard seal material for
all Bellows solenoid valves is a
special treated Viton®.
Valves
From Only
$
493 48
 PVC Price Natural PP Price PVDF Price
Needle Valve (N-) LG-(D)N-(R)1 $94.58 LG-(D)N-(R)2 $169.59 LG-(D)N-(R)3 $267.50
Std. Ball Valve (B-) LG-(D)B-(R)1 124.59 LG-(D)B-(R)2 245.84 LG-(D)B-(R)3 420.83
Lab Ball Valve (L-) LG-(D)L-(R)1 87.08
No Valve (Remote) LG-(D)R-X1 57.19 LG-(D)R-X2 82.92 LG-(D)R-X3 174.16
Hot Cold (-HC) LG-DN-HC1 249.59 LG-DN-HC2 291.25 LG-DN-HC3 416.25
Purity Light (xxK-) LG-(DK)N-(R)1 165.85 LG-(DK)N-(R)2 249.17 LG-(DK)N-(R)3 332.50
Recirculating (R-) LG-DNR-(R)2 365.84 LG-DNR-(R)3 415.84
Handle Options: (R) Right Hand, (L) Left Hand, (B) Handle Back,(F) Handle Front, (X) No Valve, (HC) Hot & Cold
Mount Options: (D) Deck Mount, (W) Wall Mount LGV Lab Faucet With Vacuum Breaker
Purity Light Resistivity Threshold Choice: 5K, 10K, 25K, 50K, 250K, 500K, 1Meg, 2Meg Ohm/cm
Marquest Scientific’s line of High Purity DI Water Lab Faucets provide POU access.
NEW Orifice
Sizes
NEW Orifice
Sizes
For process liquid applications
requiring high
flow capacity and high
pressure capability!
Installation Note:
1) Faucet include 3" ThruDeck
Nipple, Ring Nut, &
Casual Water Gasket
2) All Inlet connections 3
⁄8" FNPT
3) Faucet will need require
1" hole for mounting
4) Max deck or wall thickness
is 3"
Type I, II, & III Deionized Water
n Available in PVC, High Purity Natural
Polypro & PVDF
n Complete line allows total line flexibility
n All injection molded, rugged design & construction
n Max flow rate of 2.4 gpm - 4.8 gpm at 80 psi
n Variety of control valve options
– Needle Valve (N)
– Ball Valve (Lab)
– Union Ball Valve (Std) GF 546
– Remote No Valve
n Standard 3
⁄8" Female npt inlet connection,
Fusion & Tri-clamp by request
n FDA, USDA, & USP standards are either
met or exceeded
n Seal Virgin PTFE
n Gooseneck Component is heavy wall, custom
extruded for increase rigidity
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 51
51_51 3/30/14 10:15 AM Page 51
250 Series Plastic Ball Valves
250 Series Plastic Ball Valves Buna-N Seals Standard
The 250 series two way PVC ball valves are
a general purpose valves that offer features
designed for speed and easy operation. A
variety of seal materials for best chemical
compatibility, mixed end combinations
available for greater flexibility.
 Item # End Conn. End Conn. Max. Pressure Dia. Thru Ball PVC-All Ends
 PVC2504F4FB 1
⁄4" F 1
⁄4" F 125 .500 $11.91
 PVC2508F8FB 1
⁄2" F 1
⁄2" F 125 .500 11.91
 PVC2508M8MB 1
⁄2" M 1
⁄2" M 125 .500 11.91
 PVC25012M12MB 3
⁄4" M 3
⁄4" M 125 .500 11.91
 PVC2508F8MB 1
⁄2" F 1
⁄2" M 125 .500 11.91
 PVC25012F12MB 3
⁄4" F 3
⁄4" M 125 .500 11.91
 PVC2506B6BB 3
⁄8" BARB 3
⁄8" BARB 125 .500 11.91
 PVC2508B8BB 1
⁄2" BARB 1
⁄2" BARB 125 .500 11.91
 PVC25010B10BB 5
⁄8" BARB 5
⁄8" BARB 125 .500 11.91
 PVC25012B12BB 3
⁄4" BARB 3
⁄4" BARB 125 .500 11.91
F.N.P.T. to F.N.P.T.
M.N.P.T. to M.N.P.T.
BARB to BARB
F.N.P.T. to M.N.P.T
Quick Spec
n 90° Actuation
n Max 125 PSI
n Buna-N Seals
n 140°F Max. Temperature
Webb Price Only $
11 91
638/657 Series PVC Ball Valves
 End End Max.
 Item # Conn. Conn. Pressure Price
6380090 1
⁄4" F 1
⁄4" F 125 $3.91
6382890 3
⁄8" F 3
⁄8" F 125 4.23
6380490 1
⁄4" M 1
⁄4" F 125 3.91
6381990 *BARB 1
⁄4" F 125 4.23
6381090 1
⁄4" CJ 1
⁄4" F 125 4.23
6381590 3
⁄8" CJ 1
⁄4" F 125 4.23
6381790 1
⁄4" CJG 1
⁄4" CJG 125 6.79
6381890 3
⁄8" CJG 3
⁄8" CJG 125 7.01
6382990 3
⁄8" CJG 1
⁄4" CJG 125 6.89
6383190 1
⁄4" F 3
⁄8" CJG 125 5.46
6382590 3
⁄8" CJG 3
⁄8" F 125 7.94
 End End Max.
 Item # Conn. Conn. Pressure Price
6570190 1
⁄4" F 1
⁄4" F 125 $4.34
6570690 1
⁄4" F 1
⁄4" M 125 4.34
6571190 1
⁄4" F *BARB 125 4.68
6570090 1
⁄4" F 1
⁄4" CJ 125 4.68
6570590 1
⁄4" F 3
⁄8" CJ 125 4.68
6571390 1
⁄4" F 1
⁄4" CJG 125 5.77
6571290 1
⁄4" F 3
⁄8" CJG 125 5.91
657 Right Angle Buna-N Seals
638 Straight 2-Way Buna-N Seals
638 Series 657 Series
way 2
Valves
226 Series Plastic Ball Valves
226 Series Plastic Ball Valves – Buna-N Seals
The 226 series offers the advantage ot mixing or matching the different end
combinations. Below are the combinations Webb maintains in stock. The 226 series is offered
in PVC, Nylon, or filled polypropylene. Buna-N seals are standard, other seals available for
best chemical compatibility.
NSF listed (PVC only).
way 2
 Item # End Conn. End Conn. Max. Pressure PVC FN FP
 2262F2FB 1
⁄8" F 1
⁄8" F 125 $7.17 $7.84 $7.70
 2264F4FB 1
⁄4" F 1
⁄4" F 125 7.17 7.84 7.70
 2264F4MB 1
⁄4" F 1
⁄4" M 125 7.17 7.84 7.70
 2264M4MB 1
⁄4" M 1
⁄4" M 125 7.17 7.84 7.70
 2264B4BB 1
⁄4" BARB 1
⁄4" BARB 125 7.17 7.84 7.70
 2266B6BB 3
⁄8" BARB 3
⁄8" BARB 125 7.17 7.84 7.70
 2268B8BB 1
⁄2" BARB 1
⁄2" BARB 125 7.17 7.84 7.70
When ordering please specify material: Example: PVC2262F2 = 1
⁄8" FNPT $7.17 ea.
Prefix Item # with PVC = Polyvinyl Chloride, FN = Filled Nylon, FP = Filled Ploypropylene
COMPONENT
Optional Round
Fluted Handle
Available on all
226 Series Ball
Valves
F.N.P.T. to F.N.P.T. M.N.P.T. to F.N.P.T M.N.P.T. to M.N.P.T. BARB to BARB
From Only
$
717
689 Series T-Link PVC Ball Valve
689 Series T-Link PVC Ball Valve –
Buna-N Seals
 Valve Tube Max.
 Item # End O.D. Pressure Price
6890090 1
⁄4" F 1
⁄4" QEST 125 $8.79
6890190 1
⁄4" F 3
⁄8" QEST 125 8.90
6890290 1
⁄4" F 1
⁄2" QEST 125 8.90
6890690 1
⁄4" CJ 1
⁄4" QEST 125 8.90
6890790 1
⁄4" CJ 3
⁄8" QEST 125 8.90
6890890 1
⁄4" CJ 1
⁄2" QEST 125 9.36
6891390 3
⁄8" CJ 3
⁄8" QEST 125 9.36
6891890 1
⁄4" CJG 1
⁄4" QEST 125 10.35
6891990 1
⁄4" CJG 3
⁄8" QEST 125 10.35
6892090 1
⁄4" CJG 1
⁄2" QEST 125 10.44
6892490 3
⁄8" CJG 1
⁄4" QEST 125 10.67
6892590 3
⁄8" CJG 3
⁄8" QEST 125 10.67
6892690 3
⁄8" CJG 1
⁄2" QEST 125 10.80
SMC in-line supply valves are designed for a broad range of applications, from
ultra-pure water systems to beverage dispensing and food process industries.
n Materials: Body, ball, handle, ends – PVC
n Buna-N seals standard, etylene propylene
seals available
n For technical assistance and custom valve or
end combinations, please consult sales office
n NSF Listed Component
 F – F.N.P.T. Female
 M – M.N.P.T. Male
 CJ – Compression ”JACO“
 CJG – Compression ”John Guest“
1
⁄4" QEST – 3
⁄8" O.D. Tube (1
⁄4" Nominal CTS) 3
⁄8" QEST – 1
⁄2" O.D. Tube (3
⁄8" Nominal CTS) 1
⁄2" QEST – 5
⁄8" O.D. Tube (1
⁄2" Nominal CTS)
 CTS – Copper Tube Size (Inside Diameter)
QEST MAKES CONNECTIONS IN FOUR EASY STEPS:
1) Slip nut over pipe. 2) Slip ring onto pipe. 3) Slip cone over pipe. 4) Screw nut onto
threaded pipe or fitting.
NUT RING CONE
THREAD
Code Identification
Quick Spec
n Full ported
n Styled quarter turn handle
n Positive shut-off
n One piece ball and stem
n Compact design COMPONENT
way 2
Jaco, and John Guest. The 638 and 657
series are NSF listed, offering superior quality
and dependability.
n Materials: Body, ball, handle, ends – PVC
n Buna-N seals standard, etylene propylene
or fluroelastomer seals available
n For technical assistance please consult
sales office
n NSF Listed Component 657 and 638 series valves offer a broad
range of applications, from ultra-pure water
systems to photographic processing equipment
and laboratory use. These PVC
ball valves come in a broad range of end
connectors, male, female, tapered barb,
Simple, economical in-line valves
that set today’s standards in
performance, quality and dependability.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 52
52_52 3/30/14 10:18 AM Page 52
NOTES: 1) 5 to 50 psi set range standard. 2) 1
⁄2" Regulator available fully molded, consult sales office. 3) Series PRD Pressure Regulators are available
for control of differential pressure across downstream system equipment such as filters. Consult sales office for additional information and pricing.
Relief Valves
Relief valves to prevent over pres sures in
vessels and lines to handle by-pass flow
from pumps. For highly corrosive or pure liquids.
“RVT” relief valves feature a non-sticking
design utilizing a Teflon® shaft passing
through (3) U-cup seals.
SERIES RVD is an angle pattern design featuring
a single diaphragm which is an
advantage where salt crystallization problems
can cause valve sticking. The standard
Pressure regulators to ac -
cu rate ly convert varying or
constant ex ces sive
upstream pres sures to a
predetermined maximum
down stream pressure in
systems han dling highly
corrosive or ultra-pure liq uids.
Valve Pressure Settings RVD RVD RVT RVT RVT RVT RVT RVT
 Relief Valve Pipe Sizes 1
⁄4" 1
⁄2" 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
PSI 5-25 Max Recommended Flows 2 GPM 2 GPM 4 GPM 8 GPM 15 GPM 25 GPM 50 GPM 80 GPM
26-100** Actual Over-pressure to Reach Recommended Flows 6 psi 6 psi 10 psi 12 psi 10 psi 10psi 14 psi 14 psi
 Percentage of Over-pressure to Reach Recommended Flows 40% 40% 40% 40% 40% 40% 40% 40%
**Series RVD sizes 1
⁄4" thru 1
⁄2" can be set to 150 psi and sizes 3
⁄4" thru 2" can be set only to 100 psi.
NOTES: 1) Optional pressure seal $16.12. Available on RVT only.
2) Stainless steel fasteners are standard.
3) RVD fasteners are stainless steel (standard).
4) For Polypro pylene, PVDF, & Teflon pricing, consult sales office.
Flow Rate Ref er ence Chart Series (RVD & RVT)
EPDM PVC Viton EPDM CPVC Viton
 NPT Item # Price Item # Price Item # Price Item # Price
 1
⁄4" RVD025EP-PV $154.52 RVD025V-PV $164.35 N/A N/A N/A N/A
 1
⁄2" RVD050EP-PV 166.66 RVD050V-PV 176.05 N/A N/A N/A N/A
 1
⁄2" RVT050EP-PV 300.44 RVT050V-PV 314.51 N/A N/A N/A N/A
 3
⁄4" RVT075EP-PV 328.61 RVT075V-PV 359.15 RVT075EP-CP $512.94 RVT075V-CP $516.12
 1" RVT100EP-PV 377.93 RVT100V-PV 417.85 RVT100EP-CP 603.15 RVT100V-CP 608.21
 11
⁄4" RVT125EP-PV 422.52 RVT125V-PV 509.34 RVT125EP-CP 689.32 RVT125V-CP 694.39
 11
⁄2" RVT150EP-PV 485.94 RVT150V-PV 553.96 RVT150EP-CP 791.71 RVT150V-CP 796.77
 2" RVT200EP-PV 591.53 RVT200V-PV 659.56 RVT200EP-CP 942.74 RVT200V-CP 947.81
 3" RVTX300EP-PV 1,213.87 RVTX300V-PV 1,259.68 RVT300EP-CP 1,317.81 RVT300V-CP 1,322.88
Pressure regulators can also be used to maintain a constant pressure in a tank. Some tank applications cannot exceed certain pressures
due to the tank construction or tank equipment. A pressure regulator, when preset to a certain pressure, will prevent excessive pressure.
Webb tech tip
To assure steadier flow, better pump performance,
and to protect pumps from dead heading,
use Plast-O-Matic’s Pressure Relief Valve.
Valves
RVD is available in 1
⁄4" and 1
⁄2" pipe sizes. Set
pressures from 5 to 150 PSI. (1
⁄3 to 10 Bars).
The spring housing, since it is not in contact
with liquid, is supplied only in PVC.
RVT Process Cooling Water Stick
FEATURES
n Superior pressure regulator performance.
n No corrosion, no maintenance.
n 2 connections per stick.
n One tag number per stick.
n Molded, Machined & Assembled in USA.
n Lower cost and smaller footprint than individually
assembled sticks.
n Easily adapts to any piping configuration.
Order by part number and specify exact
chemicals, temperatures and pressures.
ORDERING PCWS
Valve pipe size
050 1
⁄2"
075 3
⁄4"
100 1"
Special designation
X When “X” appears in this spot,
it designates BSP threads
Seal material
V FKM
EP EPDM
Connections*
S Socket ends
T Threaded ends
Body Material
PV Polyvinyl Chloride (PVC)
CP Chlorinated Polyvinyl Chloride (CPVC)
PP Polypro
PF PVDF
*Spigots and other connection types available.
 Size Item # Price
 1
⁄2" PCWS050EP-PV $643.05
 3
⁄4" PCWS075EP-PV 960.57
 1" PCWS100EP-PV 1,062.59
SUPPLY SIDE
Series PRH/PRHM Pressure Regulator – Spring Setting 5 to 125 PSI
Also available in CPVC, Natural Polypro, PTFE, and PVDF.
 PVC EPDM Seals Viton Seals
 (NPT) Item # Price Item # Price
 *1
⁄4" PRH025EP-PV $396.12 PRH025V-PV $401.46
 1
⁄2" PRHM050EP-PV 447.37 PRHM050V-PV 452.71
 3
⁄4" PRHM075EP-PV 633.15 PRHM075V-PV 638.49
 1" PRHM100EP-PV 752.72 PRHM100V-PV 758.07
 11
⁄2" PRHM150EP-PV 871.24 PRHM150V-PV 876.59
 2" PRHM200EP-PV 1,029.26 PRHM200V-PV 976.76
 3" PRH300EP-PV 2,177.04 PRH300V-PV 2,182.36
* All 1
⁄4" sizes have set pressure range of 5 to 125 PSI. PR Series have set pressure range of 5 to 50 PSI.
From Only
$
15452
Lutz-JESCO America Corporation’s Pulsation Dampener Series (PDS) is a
very unique in-line accumulator. The PDS is designed to absorb pressure
pulsations in piping systems created by metering pumps with operating
pressures up to 150 psig. It incorporates a tubular diaphragm that separates
process liquid from a gas cushion.
Pulsation Dampener PDS
Item # Description Price
PDS008012 Pulsation Dampener Hypalon-seal, PVC-housing ¼" FNPT $247.05
PDS008022 Pulsation Dampener Viton-seal, PVC-housing ¼" FNPT 340.20
PDS025012 Pulsation Dampener Hypalon-seal, Poly Pro-housing ½" FNPT 380.70
PDS025022 Pulsation Dampener Viton-seal, Poly Pro-housing ½" FNPT 554.85
PDS075012 Pulsation Dampener Hypalon-seal, Poly Pro-housing 1" FNPT 579.15
PDS075022 Pulsation Dampener Viton-seal, Poly Pro-housing 1" FNPT 680.40
PDS250013 Pulsation Dampener Hypalon-seal, PVC-housing 1½" FNPT 935.55
PDS250023 Pulsation Dampener Viton-seal, Poly Pro-housing 1½" FNPT 1,198.80 Pulsation dampener price includes air charging valve and glycerin filled pressure gauge.
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 53
53_53 3/30/14 10:19 AM Page 53
 Operating Pressure Differential (psi) Max. AC Max. Fluid Brass Body
 Pipe Orifice Cv Flow Air-Inert Light Oil Temp. °F Catalog ULƒ
Size (in) Size (in) Factor Min. Gas Water @300 SSU AC DC Number Listing Voltage Item # Price
NORMALLY CLOSED (Closed when de-energized) NBR or PTFE - ¡Seating
 3
⁄8 3
⁄8 1.5 ¿ 150 125 – 180 – 8210G73¬ l 120/60, 110/50 176349 $109.98
 3
⁄8 5
⁄8 3 0 150 150 – 180 – 8210G93 m 120/60, 110/50 174775 145.42
 3
⁄8 5
⁄8 3 5 200 150 135 180 – 8210G1 m 120/60, 110/50 174765 123.43
 1
⁄2 7
⁄16 2.2 ¿ 150 125 – 180 – 8210G15¬ l 120/60, 110/50 174766 119.77
 1
⁄2 5
⁄8 4 0 150 150 – 180 – 8210G94 m 120/60, 110/50 77607 145.42
 1
⁄2 5
⁄8 4 5 200 150 135 180 – 8210G2 m 120/60, 110/50 79431 123.43
 1
⁄2 5
⁄8 4 5 – – – – 150 8210G2 m 24/DC 192143* 123.43
 1
⁄2 5
⁄8 4 5 200 150 135 180 – 8210G2HW m 120/60, 110/50 190216 144.20
 1
⁄2 5
⁄8 4 5 300 300 300 175 – 8210G7 m 120/60, 110/50 176348 178.42
 3
⁄4 3
⁄4 5 5 125 125 125 180 – 8210G9 m 120/60, 110/50 77605 142.98
 3
⁄4 3
⁄4 5 5 – – – – 150 8210G9 m 120/60, 110/50 217421** 142.98
 3
⁄4 3
⁄4 5 5 125 125 125 180 – 8210G9HW m 120/60, 110/50 190210 163.76
 3
⁄4 3
⁄4 5 0 150 150 – 180 – 8210G95 m 120/60, 110/50 87713 160.10
 3
⁄4 3
⁄4 6 0 350 300 200 200 – 8210G26¡√l 120/60 212542 378.84
 1 1 13 0 150 125 125 180 – 8210G54√ l 120/60 176341 338.52
 1 1 13 5 150 150 100 180 – 8210G4 m 120/60, 110/50 77604 251.75
 11
⁄4 11
⁄8 15 5 150 150 100 180 – 8210G8 m 120/60, 110/50 174772 305.52
 11
⁄2 11
⁄4 22.5 0 150 125 125 180 – 8210G56√ – 120/60 176343 510.82
 11
⁄2 11
⁄4 22.5 5 150 150 100 180 – 8210G22 l 120/60, 110/50 153678 466.83
 2 13
⁄4 43 5 150 125 90 180 – 8210G100 l 120/60, 110/50 174764 823.67
NORMALLY OPEN (Open when de-energized) NBR or PTFE - ¡Seating
 3
⁄8 5
⁄8 3 0 150 150 125 180 – 8210G33 l 120/60, 110/50 174770 252.97
 1
⁄2 5
⁄8 4 0 150 150 125 180 – 8210G34 l 120/60, 110/50 77606 252.97
 3
⁄4 3
⁄4 5.5 0 150 150 125 180 – 8210G35 l 120/60, 110/50 83874 252.97
Notes: ¿ 5 psi on Air; 1 psi on Water ¡Valve Provided with PTFE main Disc. ¬Valve Includes Ultem (G.E. trademark) piston
√Must have solenoid mounted vertical and upright ƒ m Safety Shutoff Valve; lGeneral Purpose Valve
NEMA 4 Standard Explosionproof, add prefix EF; SC = Type F - High temperature DIN-type connector;
JKF = Elongated splice box; Class F - High temperature - Screw terminals; HW = Hot water construction
*Operating Pressure Differential (psi) - Max. DC: Air/Inert Gas - 125, Water - 100, Light Oil @300 SSU - 100
**Operating Pressure Differential (psi) - Max. DC: Air/Inert Gas - 100, Water - 90, Light Oil @300 SSU - 75
 Operating Pressure Differential (psi) Max. AC Max. Fluid Brass Body
 Pipe Orifice Cv Flow Air-Inert Light Oil Temp. °F Catalog UL¿
Size (in) Size (in) Factor Gas Water @300 SSU AC DC Number Listing Voltage Item # Price
NORMALLY CLOSED (Closed when de-energized) NBR Disc
 1
⁄8 1
⁄8 .34 155 180 140 180 – 8262H2 m 120/60, 110/50 176376 $52.55
 1
⁄4 3
⁄32 .17 360 340 160 180 – 8262H20 m 120/60, 110/50 77624 68.44
 1
⁄4 1
⁄8 .35 140 165 90 180 – 8262H22 m 120/60, 110/50 174781 61.10
 1
⁄4 1
⁄8 .35 300 300 200 180 – 8262H232 m 120/60, 110/50 176378 74.55
 1
⁄4 5
⁄32 .50 180 200 145 180 – 8262H202 m 120/60, 110/50 77611 70.88
 1
⁄4 7
⁄32 .72 90 100 100 180 – 8262H208 m 120/60, 110/50 174779 74.55
 1
⁄4 7
⁄32 .85 40 50 40 180 – 8262H13 m 120/60, 110/50 174777 62.32
 1
⁄4 9
⁄32 .88 90 100 90 180 – 8262H212 m 120/60, 110/50 174814 94.10
 1
⁄4 9
⁄32 .96 27 36 28 180 – 8262H90 m 120/60, 110/50 174782 62.32
 1
⁄4 9
⁄32 .96 – – – – 120 8262H90 m 24/DC 212034* 62.32
NORMALLY CLOSED (Closed when de-energized) NBR Disc
 1
⁄8 1
⁄16 .09 500 300 225 180 – 8262H91 l 120/60, 110/50 212035 96.54
 1
⁄4 1
⁄8 .35 130 110 100 180 – 8262H262 120/60, 110/50 174815 113.66
Notes: ¿ m Safety Shutoff Valve; lGeneral Purpose Valve
NEMA 4 Standard Explosionproof, add prefix EF; X with TPL 13200 = Special gasketed panel mount; P = Panel mounted;
SF = Class F - High temperature - Spade terminals; V = Viton
*Operating Pressure Differential (psi) - Max. DC: Air/Inert Gas - 15, Water - 16, Light Oil @300 SSU - 16
 Operating Pressure Differential (psi) Max. AC Max. Fluid
 Pipe Orifice Cv Flow Air-Inert Light Oil Temp. °F Brass Body
Size (in) Size (in) Factor Gas Water @300 SSU AC DC Catalog Number Voltage Item # Price
UNIVERSAL OPERATION (Presure at any port)
 1
⁄8 1
⁄16 .09 100 100 100 180 – 8320G1 120/60, 110/50 176387 $98.99
 1
⁄4 1
⁄16 .09 125 130 130 200 – 8320G172 120/60, 110/50 174789 124.65
 1
⁄4 3
⁄32 .12 100 100 100 200 – 8320G174 120/60, 110/50 174790 124.65
 1
⁄4 1
⁄8 .25 50 50 50 200 – 8320G176 120/60, 110/50 174791 119.77
NORMALLY CLOSED (Closed when de-energized)
 1
⁄8 1
⁄16 .09 150 125 125 180 – 8320G13 120/60, 110/50 212219 87.99
 1
⁄8 3
⁄32 .12 100 100 100 180 – 8320G15 120/60, 110/50 174891 89.21
 1
⁄4 1
⁄16 .09 210 225 225 200 – 8320G182 120/60, 110/50 174792 153.98
 1
⁄4 3
⁄32 .12 150 150 150 200 – 8320G184 120/60, 110/50 174793 124.65
NORMALLY OPEN (Open when de-energized)
 1
⁄8 3
⁄64 .06 200 200 200 180 – 8320G136 120/60, 110/50 212233 92.88
 1
⁄4 1
⁄16 .09 250 250 250 200 – 8320G192 120/60, 110/50 212250 153.98
 1
⁄4 3
⁄32 .12 150 140 140 200 – 8320G194 120/60, 110/50 176388 124.65
Notes: NEMA 4 Standard Explosionproof, add prefix EF
 Operating Pressure Differential (psi) Max. AC Max. Fluid Brass Body
 Pipe Orifice Size (in) Cv Flow Factor Air- Light Oil Temp °F Catalog
Size (in) Pressure Exhaust Inlet Exhaust Min. Inert Gas Water @50 SSU AC DC Number Voltage Item # Price
SINGLE SOLENOID
 1
⁄4 1
⁄16 3
⁄32 .09 .09 10 150 150 150 180 – 8345G1 120/60, 110/50 153680 $237.08
 1
⁄4 1
⁄16 3
⁄32 .09 .09 10 150 150 150 180 – EF8345G1 120/60, 110/50 174930 331.18
SINGLE SOLENOID AIR-ONLY CONSTRUCTION - Exhaust to Atmosphere
 1
⁄4 1
⁄16 3
⁄32 .09 .09 10 150 – – 180 – 8345H3 120/60, 110/50 174829 255.42
Notes: NEMA 4 Standard Explosionproof, add prefix EF
Quick Spec
n Wide range of sizes
n High Flow Valves for liquid, and air/inert gas service
n Industrial applications include: Car wash, Laundry equipment,
Air compressors, Industrial water control, Pumps
General Service Solenoid Valves
ASCO warehouse stock available for
immediate delivery.
MODEL 8262
MODEL 8210
MODEL 8320
MODEL 8345
• Pilot Operated
• Direct Lift
Available in
Stainless Steel
We carry an extensive range of products!
Valves
Model 212 Series
The 212 Series composite valve is designed for use in water purification
and water treatment applications, specifically within the
membrane based filtration system application. The new 212 series
composite valve is ideal for use in mid-size Reverse Osmosis
Systems applications where lead free and NSF approved constructions
are required. The 212 series composite valves are available in
1
⁄2" and 3
⁄4" pipe sizes, and are designed with our
new FasN™ universal connection system. FasN
enables an NPT thread connection, turn and
lock, and solvent bond fitting possibilities.
The 212 series composite valve also
handles pressure up to 150 PSI
and operates at up to 180° F
Call Ian For Details.
NEW
Direct Acting
Available in
Stainless Steel
• Compact Valve
• Pilot Operated
• Brass Body
• Direct Acting
Available in
Stainless Steel
Model 8210 Model 8262
Model 8320 Model 8345
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 54
54_54 3/30/14 10:23 AM Page 54
CHEM-PRO™ C2 Series Diaphragm Metering Pump
CHEM-PRO™ C3 Series Diaphragm Metering Pump
CHEM-PRO C2F DIAPHRAGM METERING PUMP CHEM-PRO C2V DIAPHRAGM METERING PUMP
n Manual pump speed control
n Variable speed dive (max 166 strokes per minute)
n Diaphragm Failure Detection (DFD)
n Priming / degassing valve built-in
n Displays % motor speed
n Flow verification sensor compatible
n Smooth full stroke every time - helps reduce chance of
vapor-lock
n Smooth chemical feed - no hammering as with solenoid pumps
n Max. 175 PSI
n Manual pump speed control
n Variable speed dive (max 166 strokes per minute)
n Inputs (fully configurable):
n 4-20 mA, 0-10 VDC, High speed pulsed, Low speed pulsed
n Outputs: 3 amp relay
n Batch dispensing
n Displays % motor speed and RPM
n Flow verification sensor compatible
n Smooth full stroke - helps reduce chance of vapor-lock
n Smooth chemical feed - no hammering as with solenoid pumps
n Max. 175 PSI
CHEM-PRO C3F DIAPHRAGM METERING PUMP
n Manual pump speed control
n Variable speed dive (max 130 strokes per minute)
n Diaphragm Failure Detection (DFD)
n Priming / degassing valve built-in
n Displays % motor speed
n Flow verification sensor compatible
n Smooth full stroke every time - helps reduce chance of
vapor-lock
n Smooth chemical feed - no hammering as with solenoid pumps
n Max. 150 PSI for .19 - 19.7 GPH 150 PSI
Max. 100 PSI for .42 - 42 GPH 100 PSI
C2F Diaphragm Metering Pump
No Metal in fluid path Max. 166 Strokes/Minute
Feed Rate at
0 PSIg (GPH) Connection Type Item # Price
.06 - 6.0 1
⁄2" Male NPT / PVDF C2F243XVA $1,296.27
.06 - 6.0 1
⁄2" Female NPT / PVDF C2F243XVB 1,296.27
.06 - 6.0 1
⁄2" Hose Barb / PVDF C2F243XVC 1,296.27
.06 - 6.0 3
⁄8" Tube compression/ PVDF C2F243XVD 1,296.27
.10 - 10.0 1
⁄2" Male NPT / PVDF C2F241XVA 1,296.27
.10 - 10.0 1
⁄2" Female NPT / PVDF C2F241XVB 1,296.27
.10 - 10.0 1
⁄2" Hose Barb / PVDF C2F241XVC 1,296.27
.10 - 10.0 3
⁄8" Tube compression/ PVDF C2F241XVD 1,296.27
.15 - 15.0 1
⁄2" Male NPT / PVDF C2F242XVA 1,296.27
.15 - 15.0 1
⁄2" Female NPT / PVDF C2F242XVB 1,296.27
.15 - 15.0 1
⁄2" Hose Barb / PVDF C2F242XVC 1,296.27
.15 - 15.0 3
⁄8" Tube compression/ PVDF C2F242XVD 1,296.27
230V and 220V also available.
C2V Diaphragm Metering Pump
No Metal in fluid path Max. 166 Strokes/Minute
Feed Rate at
0 PSIg (GPH) Connection Type Item # Price
.06 - 6.0 1
⁄2" Male NPT / PVDF C2V243XVA $1,516.87
.06 - 6.0 1
⁄2" Female NPT / PVDF C2V243XVB 1,516.87
.06 - 6.0 1
⁄2" Hose Barb / PVDF C2V243XVC 1,516.87
.06 - 6.0 3
⁄8" Tube compression/ PVDF C2V243XVD 1,516.87
.10 - 10.0 1
⁄2" Male NPT / PVDF C2V241XVA 1,516.87
.10 - 10.0 1
⁄2" Female NPT / PVDF C2V241XVB 1,516.87
.10 - 10.0 1
⁄2" Hose Barb / PVDF C2V241XVC 1,516.87
.10 - 10.0 3
⁄8" Tube compression/ PVDF C2V241XVD 1,516.87
.15 - 15.0 1
⁄2" Male NPT / PVDF C2V242XVA 1,516.87
.15 - 15.0 1
⁄2" Female NPT / PVDF C2V242XVB 1,516.87
.15 - 15.0 1
⁄2" Hose Barb / PVDF C2V242XVC 1,516.87
.15 - 15.0 3
⁄8" Tube compression/ PVDF C2V242XVD 1,516.87
230V and 220V also available.
CHEM-PRO C3V DIAPHRAGM METERING PUMP
n Manual pump speed control
n Variable speed dive (max 130 strokes per minute)
n Inputs (fully configurable):
n 4-20 mA, 0-10 VDC, High speed pulsed, Low speed pulsed
n Outputs: 3 amp relay
n Batch dispensing
n Displays % motor speed and RPM
n Flow verification sensor compatible
n Smooth full stroke - helps reduce chance of vapor-lock
n Smooth chemical feed - no hammering as with solenoid pumps
n Max. 150 PSI for .19 - 19.7 GPH 150 PSI
Max. 100 PSI for .42 - 42 GPH 100 PSI C3F Diaphragm Metering Pump No Metal in fluid path
Feed Rate at
0 PSIg (GPH) Connection Type Item # Price
.25 - 25.0 1
⁄2" Male NPT / PVDF C3F241XVA $1,248.30
.25 - 25.0 1
⁄2" Female NPT / PVDF C3F241XVB 1,248.30
.25 - 25.0 1
⁄2" Hose Barb / PVDF C3F241XVC 1,248.30
.40 - 40.0 1
⁄2" Male NPT / PVDF C3F242XVA 1,248.30
.40 - 40.0 1
⁄2" Female NPT / PVDF C3F242XVB 1,248.30
.40 - 40.0 1
⁄2" Hose Barb / PVDF C3F242XVC 1,248.30
230V and 220V also available.
C3V Diaphragm Metering Pump No Metal in fluid path
Feed Rate at
0 PSIg (GPH) Connection Type Item # Price
.25 - 25.0 1
⁄2" Male NPT / PVDF C3V241XVA $1,433.23
.25 - 25.0 1
⁄2" Female NPT / PVDF C3V241XVB 1,433.23
.25 - 25.0 1
⁄2" Hose Barb / PVDF C3V241XVC 1,433.23
.40 - 40.0 1
⁄2" Male NPT / PVDF C3V242XVA 1,433.23
.40 - 40.0 1
⁄2" Female NPT / PVDF C3V242XVB 1,433.23
.40 - 40.0 1
⁄2" Hose Barb / PVDF C3V242XVC 1,433.23
230V and 220V also available.
 Item # Price
 72000-380 $41.19
Extended Brackets for ProSeries Pumps
2 YEAR
WARRANTY
2 YEAR
WARRANTY
Pumps
www.facebook.com/webbplastics
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 55
55_55 3/31/14 7:45 AM Page 55
 TFD Proportional INPUT OUTPUT
 (Leak *PPM **FVS (Flow Frequency Frequency Alarm Relay
 Item # Detection) Dosing Verification) 4-20 mA 0-10 VDC (Hz) 4-20 mA (Hz) (10) Amp Price
 A3V Yes Yes Yes Yes Yes Yes Yes Yes Yes $3,150.00
 A4V Yes Yes Yes Yes Yes Yes Yes Yes Yes 4,600.00
Pumps
New to our ProSeries™ lineup is our Flex-Pro™ high pressure
peristaltic metering pump. Spec the A3 in your next job!
n No valves (no
clogging), Self
Priming
n Volume output
not affected by
changes in back
pressure
n Shortest lead time in
industry (3 to 5 days)
Quick Spec
n Variable speed brushless DC motor
n Washdown, NEMA 4X (IP66)
n Max feed rate 158 GPH
n Pressure up to 125 PSI (8.6 bar)
n Continuous duty cycle
n Scalable output signal to control
other pumps or external devices
(4-20 mA and pulsed output)
n Multiple inputs: 4-20 mA, 0-10
VDC, Pulsed, Batch (program trigger
from 1 - 1,000 pulses), Contact
Closure (remotely turn the pump
ON/OFF) – Perfect for use with a
PLC to control chemical feed!
n Automated parts per million dosing
n Multiple contact closure outputs (3)
n Programmable 10 amp relay
n New feature to extend tube life
n Intuitive, menu driven controls with
large, high res., backlit LCD
n Built-in diagnostics
n Accuracy: +/- 0.5% (Every pump is
calibrated before it ships.)
n Repeatability: +/- 0.5%
n Output adjustment: 1-100% in 0.1%
increments (resolution)
n 2 year warranty
Quick Spec
n Max. Working Pressure 125 psig (8.6 bar)
n Max. Fluid Temperature 130°F (54°C)
n Ambient temp range 14° to 110°F ( -10° to 43°C)
n Max. viscosity 1000 Centipoise
n Max. suction lift 10 ft. Water
n Output accuracy +/- 10% of max. (water 0 psi, 5' suction lift)
n Turndown ratio 20:1 Standard models, 200:1 Deluxe models
n O-ring Seals FKM and TFE/P
Quick Spec
n Max. Working Pressure 125 psig (8.6 bar)
n Max. Fluid Temperature 130°F (54°C)
n Ambient temp range 14° to 110°F ( -10° to 43°C)
n Max. viscosity 1000 Centipoise
n Max. suction lift 10 ft. Water
n Output accuracy +/- 10% of max. (water 0 psi, 5' suction lift)
n Turndown ratio 20:1 Standard models, 400:1 Deluxe models
with optional Time Interval controller
n O-ring Seals FKM and TFE/P
Flex-Pro™ A3 & A4 Peristaltic
Metering Pump
Patented Tube Failure Detection
CHEM-FEED C-1500N Series
Diaphragm Metering Pump
TWO OUTPUT CONTROL OPTIONS:
Standard Models feature a quick adjusting,
high accuracy mechanical stroke length control.
The pumps minimum stroke length of
5%. Minimum recommended output is 5% of
maximum. Deluxe Models feature stroke
length and electronic time Interval control.
The pumps on time is adjustable from 5-100%
of the repeating 5 second time interval.
(0.25 - 5.0 sec.)
 C-1500N C-1700N GPD GPH OZ/Min Max Stroke Max PSI
 C15N002X C17N002X 3.4 / 14.2 .2 / .6 .3 / 1.3 14 / 14 125
 C15N102X C17N004X 8.3 / 28.9 .3 / 1.2 .7 / 2.6 30 / 14 125
 C15N302X C17N202X 16.3 / 50.2 .6 / 2.1 1.4 / 4.4 60 / 45 125
 C15N202X C17N302X 26.6 / 62.3 1.1 / 3.2 2.4 / 5.5 45 / 60 125
 C15N402X C17N204X 34.2 / 89.7 1.4 / 3.7 3.0 / 8.0 125 / 45 125
 C15N204X C17N304X 49.0 / 119.0 2.0 / 5.0 4.3 / 10.6 45 / 60 125
 C15N304X C17N402X 57.7 / 133.8 2.4 / 5.5 5.1 / 11.9 60 / 125 125
 C15N402X C15N404X 68.4 / 243.3 2.8 / 10.1 5.9 / 21.6 125 125 / 70
 C15N404X C15N401X 119.7 / 304.2 4.9 / 12.6 10.6 / 27.0 125 70 / 20
 C15N401X 155.9 6.4 13.8 125 20
 C15N443X 228.1 9.5 20.2 125 10
CHEM-FEED C-1700N Series
Diaphragm Metering Pump
Standard Models feature a quick adjusting,
high accuracy mechanical stroke length control.
The pumps efficient design allows for a
minimum stroke length of 5%. Minimum recommended
output is 5% of maximum. Each
pump head is independently
controlled.
C-1500N / C-1700N Specifications
Base Price
$
343 71
Base Price
$
510 96
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 56
56_56 3/30/14 10:27 AM Page 56
To Convert To Formula
LIQUID
GALLONS LITERS GALLONS x 3.78533 = LITERS
LITERS GALLONS LITERS x .2642 = GALLONS
OUNCES MILLILITERS OUNCES x 29.57= MILLILITERS
MILLILITERS OUNCES MILLILITERS x .0338 = OUNCES
MILLILITERS/MIN GAL. PER HOUR ML/MN x .0158
FEET OF WATER PSI Feet of Water (Head) x .43352 = PSI
GALLONS POUNDS GALLONS x 8.337 = POUNDS
GALLONS CUBIC FEET GALLONS x .1337 = CUBIC FEET
GALLONS CUBIC INCHES GALLONS x 231 = CUBIC INCHES
To Convert To Formula
GALLONS/DAY MILLILITERS/MIN GALLONS/DAY x 2.628 = MILLILITERS/MIN
GALLONS CUBIC METERS Gallons x .0037854 = Cubic meters
CUBIC METERS GALLONS Cubic Meters x 264.173 = Gallons
MISCELLANEOUS
PSI KGS/SQ. CM. PSI x .070307 = KGS/SQ. CM
KGS/SQ. CM. PSI KGS/SQ. CM. x 14.223 = PSI
INCHES MILLIMETERS INCHES x 25.4 = MILLIMETERS
MILLIMETERS INCHES MILLIMETERS x .03937 = INCHES
BARS PSI BARS x 14.5 = PSI
PSI BARS PSI x .068947 = BARS
*PLEASE NOTE: Although Webb has obtained this information from reliable sources, the company cannot assume any responsibility for its accuracy. Please verify this information before using.
Blue White’s premier
peristaltic pump
features exclusive
pump tube design!
 Max Output at 0 PSIG Maximum Electronic Percentage Control Mechanical Control
 GPD GPH LPH oz/min PSI Item # Price Item # Price
 360.0 15.0 56.8 32.0 25 C11V5(*)3X000V00 $938.76 C11F5(*)3X000V00 $679.65
 260.8 10.8 41.1 23.1 100 C11V5(*)4X000V00 938.76 C11F5(*)4X000V00 679.65
 155.9 6.4 24.6 13.8 150 C11V4(*)1X000V00 938.76 C11F4(*)1X000V00 679.65
 119.7 4.9 18.9 10.6 150 C11V4(*)4X000V00 938.76 C11F4(*)4X000V00 679.65
 57.7 2.4 9.1 5.1 150 C11V3(*)4X000V00 938.76 C11F3(*)4X000V00 679.65
Replace (*) with 4=115V/60Hz, 5=220V/50Hz, 6=230V/60Hz (Voltage does not effect pricing).
All models ship with 1 extra set of motor brushes. Typical brush life is 2000 hours.
FLEXFLO® Variable Speed Pumps
FLEXFLO® C-1100V Variable Speed DIAPHRAGM
Injector Pump for Industrial Water Treatment Applications
FLEXFLO® A-100NV Variable Speed PERISTALTIC Dosing
Pump for Industrial Water Treatment Applications
A-100NV
C-1100V
Quick Spec
n Accepts 4-20mA, 0-10VDC and pulse
input signals
n Flow rates to 95 GPD, pressure to 100 PSI
n Accuracy: ± 1% repeatability full range
n No pulsation - continuous stream injection
n Tube Failure Detection (TFD) Alarm
System
n Alarm output- relay (1 amp)
n Flow Output Verification Alarm System
(Requires Micro-Flow Sensor sold separately)
n Peristaltic Operation - No Valves to Clog
n Recommended Service Waming System
n Easy to read LCD display and controls
n Corrosion resistant enclosure
Quick Spec
n Accepts 4-20mA, 0-10VDC and pulse
input signals
n Flow rates to 360 GPD, pressure to
150 PSI
n Accuracy: ± 1% repeatability full range
n Low pulsation – smooth gearmotor
operation
n Variable speed and stroke length adjustment
n Flow Output Verification Alarm System
(Requires Micro-Flow Sensor sold separately)
n Alarm output- relay (1 amp)
n Ceramic double ball check valves
n PVDF valves with Aflas ball seats
n Recommended Service Warning System
n Easy to read LCD display and controls
n Corrosion resistant enclosure
Pumps
FLEXFLO® Variable Speed Pumps
CONVERSION TABLE
From Only
$
67965
 Max Output at any Pressure Inlet/Outlet Maximum Digital Percentage Control Standard Percentage Control
 GPD oz/min ml/min TubingO.D. PSI Item # Price Item # Price
 2.3 0.20 6 3
⁄8" OD x 1
⁄4" ID 100 A1N0(*)V-4T $831.95 A1N0(*)F-4T $567.98
 4.9 0.44 13 3
⁄8" OD x 1
⁄4" ID 100 A1N1(*)V-4T 829.65 A1N1(*)F-4T 564.49
 8.0 0.71 21 3
⁄8" OD x 1
⁄4" ID 100 A1N2(*)V-4T 829.65 A1N2(*)F-4T 564.49
 9.5 0.85 25 3
⁄8" OD x 1
⁄4" ID 75 A1N3(*)V-4T 829.65 A1N3(*)F-4T 564.49
 6.0 1.42 42 3
⁄8" OD x 1
⁄4" ID 100 A1N1(*)V-6T 829.65 A1N1(*)F-6T 564.49
 24.0 2.13 63 3
⁄8" OD x 1
⁄4" ID 100 A1N2(*)V-6T 829.65 A1N2(*)F-6T 564.49
 30.1 2.67 79 3
⁄8" OD x 1
⁄4" ID 75 A1N3(*)V-6T 829.65 A1N3(*)F-6T 564.49
 52.5 4.66 138 3
⁄8" OD x 1
⁄4" ID 50 A1N1(*)V-7T 829.65 A1N1(*)F-7T 564.49
 95.1 8.45 250 3
⁄8" OD x 1
⁄4" ID 50 A1N3(*)V-7T 829.65 A1N3(*)F-7T 564.49
Replace (*) with 0=115V/60Hz, 1=220V/50Hz, 2=230V/60Hz (Voltage does not effect pricing)
All models ship with 1 extra set of motor brushes.
IX Series are digitally controlled direct-drive diaphragm pumps. Years of experience in high-end motor technology result in
extremely accurate and energy efficient metering pumps with high resolution. The IX Series meet today’s demand for automated
chemical delivery in industries from water treatment to chemical process. Highly precise control offers a solution for a variety of
dosing applications.
IX Series Metering Pump
Pump Model Max Output Max Pressure Connection Parts Kit
Item # Price GPH PSI Size Item # Price
IX-C150TCN-(TB)-U $3,004.93 39.6 58 3
⁄4" MNPT IXC150TC-PK $326.00
IX-C150TEN-(TB)-U 3,004.93 39.6 58 3
⁄4" MNPT IXC150TE-PK 326.00
IX-C150S6N-(TB)-U 4,070.00 39.6 58 3
⁄4" MNPT IXC150S6-PK 681.00
IX-C150TCN-(TB)-U 2,850.97 15.8 145 1
⁄2" MNPT IXC060TC-PK 275.00
IX-C150TEN-(TB)-U 2,850.97 15.8 145 1
⁄2" MNPT IXC060TE-PK 275.00
IX-C150S6N-(TB)-U 3,865.00 15.8 145 1
⁄2" MNPT IXC060S6-PK 410.00
Mounting configuration Std (TB) Top Back, (TF) Top Front, (TR) Top Right, (TL) Top Left, (RF) Right Face, (LF) Left Face
Foot & Injection Valve Not Included
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 57
57_57 3/30/14 10:29 AM Page 57
Roytronic Roytronic® Pumps ® Pumps
Roytronic Pumps from LMI utilize exciting new technology that evolutionizes
the electronic metering pump; greatly improving priming capabilities, reducing
loss of prime and providing the industry with the most advanced electronics
for dependable, repeatable performance.
Each LMI Metering Pump series is designed to meet user needs for specific
application and installation requirements. Within each series there are a
number of options for controls, liquid end designs and materials, power, and
various other accessories and features.
Quick Spec
n New 4 Function Valve with swivel mount that allows flexible orientation
n FastPrime standard liquid end enables easy start-up
n Both single and double ball checks available for improved pumping efficiency
n Tubing connection system sets a new standard for secure and leak-proof tubing connections
Pumps
The AUTOPRIME™ valve allows the pump to prime during pump start-up, when gas or air binding is a greater risk.
It also continuously vents gas that may form during normal pump operation.
Without 4-Function Valve:
The AUTOPRIME™ liquid end is supplied complete from
the factory. The AUTOPRIME™ head will work with either
suction lift or flooded suction installation. Be sure to
connect as shown in the diagram to the right since connections
are very different from standard liquid ends.
With 4-Function Valve
The connection for the 4-Function Valve is attached to
the discharge connection (front) when shipped from the
factory. Mount the 4-Function Valve per the directions
on the 4-Function Valve Instruction Sheet.
NEW Digi-Plus Flow Monitor (SEE PAGE 64)
NEW AutoPrime™ Liquid End
n Automatically and continuously purges entrapped air from process fluid
n Eliminates air binding when used with liquids such as sodium hypochlorite
The Four Functions
n Anti-Siphon – The discharge flow path goes through a port that only opens on the discharge
stroke of the pump. This prevents the discharge line from siphoning liquid from the
supply tank in most applications.
n Back Pressure – The diaphragm that controls anti-siphoning creates approximately 20 psi
(1.4 Bar) back pressure on the pump’s discharge valve which improves system performance.
n Pressure Relief – A second diaphragm protects the pump from overpressure by releasing
fluid to a relief port in the event of excessive discharge line pressure.
n Pressure Release – This function makes it easy and safe to depressurize the discharge
line without loosening tubing or fittings.
4-Function Valve
For 300/400/700/800/900 Series
Cartridge Valve Liquid Ends
New Heights in Standard Features
The Roytronic® series metering pumps are
available with a new 4-function valve
designed with advanced features.
n A new mounting connection that swivels 360° to the
position best suited for the installation.
n LMI’s new tubing connection system for the most secure
connection available with an electronic metering pump.
Tubing connection system
NOTE: AutoPrime™ liquid ends will recirculate a percentage of discharge material back to supply. Depending
on application, output may be reduced up to 50%. Variables include supplier piping, stroke length and
speed setting. Maximum pressure is 150 psi for AX1, AX4, 110 psi for AX5, 50 psi for AX6 models.
Repair & Preventative Maintenance Kits
RPM Pro Pac™ kits include the recommended parts for the Roytronic® Series LMI Metering Pumps. These kits provide an easy, economical solution to annual pump
maintenance. Kits are listed with the pump price charts on pages 61-64.
Model No. 34643 Wall
Mounting Bracket Assembly
n Wall mounts any of LMI’s Series A, B, C, J, or P pumps
n Rugged, polypropylene bracket provides excellent chemical resistance
n All hardware included for mounting pump and bracket to wall
studs, concrete, or hollow block walls
n Provides a stable mounting surface
BENEFITS
®
New
AUTOPRIME™
Liquid End
NEW EXCEL “AD”
Series Shown
 Item # Description Price
34643 PP Wall Mount Brkt w/Hardware $44.00
10461 Pump Mount Kit 16.10
LMI’s Wall Mounting Bracket Assembly allows LMI pumps to face either right or left.
The tubing safety wand can be handled easily and safely, for transferring from empty to full drum.
A wall mounted pump is up and away from the solution drum, minimizing the chance for splatters.
A wall mounted pump makes changing solution drums easier.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 58
58_58 3/30/14 10:30 AM Page 58
Pumps
The FastPrime™ Liquid End shall be equipped with a valve that allows for opening the head to atmospheric
pressure to assist in pump priming. The AutoPrime™ Liquid End shall be equipped with a valve that allows for
constant removal of vapors and gasses inherent in effervescent chemicals. The AutoPrime™ valve shall enable
the pump to be primed automatically.
 Strokes/Minute Stroke Length Average Input
 (Adjustable) (Adjustable) Power @ Max.
 Series Min. Max. Recommended Min. Speed & Pressure Max. Shipping Wt.
 A81, A71, A11 1 120 20% 42 watts 10 lbs (4.75 kg)
 A84, A74, A14
 A85, A75, A15 1 240 20% 42 watts 10 lbs (4.75 kg)
 A86, A76, A16
More selections on page 62.
MODEL CODE CONFIGURATION
Control Code
1 – Dual Manual Control:
Speed (stroking frequency) and stroke length manually adjustable
7 – Pulse Input / Dual Manual Control:
External control capability through pulse input and low level float switch plus manual
control adjustments of control code 1
8 – Analog Input / Dual Manual Control:
External control capability through 4-20mA input and low level float switch plus manual
control adjustments of control code 1
Output Codes
Voltage Code
Liquid End Code
See accompanying pages for options
Liquifram™ Size Code
Material Code
See accompanying pages for options
Head/Valve Code
DRIVE LIQUID END
Model A 7 5 1 - 8 2 8 S I
Roytronic® Series “A”
Electronic Metering Pumps
CONTROL FEATURES
n Choose from one of 3 control options
n FastPrime or AutoPrime head choice
n Locking Cover
n NEMA 4X/IP65 Enclosure
n Stroke indicator light
n On/Off push button
n New industrial grade IP-68 external signal/equipment interface
n Inputs for low level switch available on certain models
Certified to
NSF/ANSI61
Connection Code
I – Inch Tube connections with tubing
M – Metric Tube connections without tubing
P – NPT only (316 SS Heads)
U – Inch Tube connections with Black, UV
resistant suction/discharge tubing
S – FastPrime™ Head + 4FV
N – FastPrime™ Head
H – AutoPrime™ Head + 4FV
A – AutoPrime™ Head
1 – 0.2 in2 2 – 0.4 in2 3 – 0.8 in2
1 – 110-120V US Plug
2 – 220-240V US Plug
3 – 220-240V DIN Plug
5 – 220-240V UK Plug
6 – 220-240V Aust/NZ Plug
7 – 220-240V Swiss Plug
8 – 110-120V No Plug
Max Capacity
1 – 0.25 GPH (1.0 l/h)
4 – 0.5 GPH (1.9 l/h)
5 – 1.0 GPH (3.8 l/h)
6 – 2.0 GPH (7.6 l/h)
Max Pressure
250 psi (17.2 bar)
250 psi (17.2 bar)
110 psi (7.6 bar)
50 psi (3.4 bar)
Roytronic Excel Series “AD”
Electronic Metering Pumps
MODEL CODE CONFIGURATION
Control Code
2 – Dual Manual Control - Digital:
Stroke frequency and length manually adjustable with LCD display, low level indication
(remote input). Display configurable to indicate theoretical pump flow.
8 – Pulse/Analog Input w/ Dual Manual Control - Digital:
Pulse or 4/20 mA signal input controls frequency, LCD display, manual stroke length
control, Frequency manually adjustable when in local control, Pulse mulitply/divide
functions, 24 V output for remote device. Includes dual low level float switch input.
Display configurable to indicate theoretical pump flow.
9 – Pulse/Analog Input w/Dual Manual Control & Enhanced Controls - Digital:
Pulse or 4/20 mA signal input controls frequency, Graphical display, manual stroke
length control, Frequency manually adjustable when in local control, Pulse
multiply/divide functions, 24 V output for remote device, dual low level float switch
input, Remote on/off signal input. Outputs include: 4-20 mA, pulse, Alarm. Remote
internal/external mode input. Display configurable to indicate theoretical pump flow.
Output Code with FastPrime™ Liquid End
Voltage Code
Liquid End Code
See accompanying pages for options
Liquifram™ Size Code
Material Code
See accompanying pages for options
Head/Valve Code
DRIVE LIQUID END
Connection Code
I – Inch Tubing
M – Metric Tubing
P – 1
⁄2" NPT - 1
⁄2" BSP Pipe (SS 1
⁄4" NPT)
U – Black, UV resistant tubing
S – FastPrime™ Head + 4FV
N – FastPrime™ Head
H – AutoPrime™ Head + 4FV
A – AutoPrime™ Head
V – High Viscosity Head
P – High Viscosity w/Ported Head
1 – 0.2 in2 2 – 0.4 in2 3 – 0.8 in2 4 – 1.6 in2
1 – 110-120V US Plug
2 – 220-240V US Plug
3 – 220-240V DIN Plug
5 – 220-240V UK Plug
6 – 220-240V
Aust/NZ Plug
7 – 220-240V Swiss Plug
8 – 110-120V No Plug
Max Capacity
1 – 0.21 GPH (0.8 l/h)
4 – 0.5 GPH (0.8 l/h)
5 – 1.0 GPH (0.8 l/h)
6 – 2.0 GPH (7.6 l/h)
Max Pressure
250 psi (17.2 bar)
250 psi (17.2 bar)
110 psi (7.6 bar)
50 psi (3.4 bar)
Control Code Connection Code
Output Code Head/Valve Code
Voltage/Cord Code Wetted Material Code
 LIQUIFRAM™ Size Code
 Liquid End Type Code
Model AD 2 5 1 - 8 3 8 S I
Control Code Connection Code
Output Code Head/Valve Code
Voltage/Cord Code Wetted Material Code
 LIQUIFRAM™ Size Code
 Liquid End Type Code
SELECT MODELS INCLUDE:
n Remote Start/Stop
n External control options for pulse or 4-20 mA input
n Backlit graphical display
n Selectable Alarms
n Separate pulse/4-20 mA input/output connections
n Dual low level float switch connection
n Universal voltage 85-265V
n 7 day event timer
n Bi-colored LED with external signal indication
n Pulse divide/multiply modes; batch
accumulate option
n Internal/External mode indicated with wired output
n Two Point Calibration (Flow Display)
These pumps achieve a new level of innovation
in solenoid-driven metering pump
technology. Offering a robust design,
micropressor control options and improved
electro-magnetics to meet all flow/pressure
ratings, ROYTRONIC EXCEL™ Series AD
chemical metering pumps provide industry
solutions for more versatile chemical injection
with greater turn-down capability.
The line includes an advanced design fitting
system for secure, leak-proof tubing connections.
Pumps with a FastPrime™ or
AutoPrime™ liquid end include 1
⁄2" NPT connections
to allow for ease of configuration.
3 Year Warranty
See Pages 60 & 61
for Pricing
See Pages 61 & 62
for Pricing
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 59
59_59 3/30/14 10:31 AM Page 59
Pumps
AX1 AutoPrime Estimated* 0.001 to 0.13 GPH (0.005 to 0.5 l/h) 120 SPM Max. Liquifram Size Code 1 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A81 A71 A11 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
AutoPrime Liquid Ends
910HI $833.79 $1,008.56 $920.00 Acrylic/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-910A $130.00
918HI 827.88 1,002.67 914.09 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-910A 130.00
AX4 AutoPrime Estimated* 0.003 to 0.25 GPH (0.01 to 0.9 l/h) 240 SPM Max. Liquifram Size Code 1 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A84 A74 A14 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
AutoPrime Liquid Ends
910HI $833.79 $1,008.56 $920.00 Acrylic/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-910A $130.00
918HI 827.88 1,002.67 914.09 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-910A 130.00
AX5 AutoPrime Estimated* 0.007 to 0.55 GPH (0.03 to 2.1 l/h) 240 SPM Max. Liquifram Size Code 2 110 psi (7.6 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A85 A75 A15 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
AutoPrime Liquid Ends
920HI $845.60 $1,020.38 $931.81 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-920A $130.00
928HI 839.69 1,014.48 925.91 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-920A 130.00
AX6 AutoPrime Estimated* 0.017 to 1.7 GPH (0.06 to 6.4 l/h) 240 SPM Max. Liquifram Size Code 3 50 psi (3.4 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A86 A76 A16 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
AutoPrime Liquid Ends
930HI $879.85 $1,054.63 $966.05 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-930A $92.69
938HI 873.93 1,048.72 960.16 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-920A 92.69
FastPrime Liquid Ends feature a manual bleed valve for easy start-up.
AX1 FastPrime Liquid Ends 0.003 to 0.25 GPH (0.01 to 1.0 l/h) 120 SPM Max. Size Code 1 250 psi (17.2 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A81 A71 A11 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
910SI $772.38 $947.15 $858.59 Acrylic/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 $95.68
915SI 774.74 949.52 860.95 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-813 127.93
918SI 766.47 941.26 852.68 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.68
919SI 785.37 960.16 871.57 Acrylic/PVDF PTFE Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-919 95.68
Molded FastPrime Liquid Ends (Double Ball Check Valves)
812SI 709.79 884.58 795.99 PVDF/PVDF Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.68
813SI 749.93 924.72 836.15 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-813 127.93
818SI 668.44 843.23 754.66 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.68
AX4 FastPrime Liquid Ends 0.005 to 0.5 GPH (0.02 to 1.9 l/h) 240 SPM Max. Size Code 1 250 psi (17.2 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A84 A74 A14 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
910SI $772.38 $947.15 $858.59 Acrylic/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 $95.68
915SI 774.74 949.52 860.95 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-813 127.93
918SI 766.47 941.26 852.68 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.68
919SI 785.37 960.16 871.57 Acrylic/PVDF PTFE Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-919 95.68
Molded FastPrime Liquid Ends (Double Ball Check Valves)
812SI 709.79 884.58 795.99 PVDF/PVDF Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.68
813SI 749.93 924.72 836.15 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-813 127.93
818SI 668.44 843.23 754.66 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.68
AX5 FastPrime Liquid Ends 0.01 to 1.0 GPH (0.04 to 3.8 l/h) 240 SPM Max. Liquifram Size Code 2 110 psi (7.6 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A85 A75 A15 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
920SI $784.17 $958.97 $870.40 Acrylic/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 3
⁄8" O.D. RPM-822 $102.97
925SI 786.54 961.33 872.77 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-823 137.28
928SI 778.28 953.07 864.48 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 3
⁄8" O.D. RPM-822 102.97
929SI 797.18 971.96 883.38 Acrylic/PVDF PTFE Fluorofilm™ PTFE/Polyprel® 4FV PE 3
⁄8" O.D. RPM-929 102.97
Molded FastPrime Liquid Ends (Double Ball Check Valves)
822SI 724.28 896.39 807.80 PVDF/PVDF Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 3
⁄8" O.D. RPM-822 102.97
823SI 761.74 936.54 847.96 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-823 137.28
828SI 680.26 855.05 766.47 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 3
⁄8" O.D. RPM-822 102.97
Roytronic® Series “A” Metering Pumps AutoPrime Liquid Ends (Degassing)
AutoPrime Liquid Ends are used in applications with off-gassing liquids such as Sodium Hypochlorite.
* See model code configuration on page 59 for proper port number and item description.
AutoPrime heads have 3 check valves: Suction on the bottom; Discharge on the front; AutoPrime bleed on the top. By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to
be returned to the chemical supply. The result is the assurance that any gas in the head is automatically relieved thus eliminating air-binding.
NOTE: Capacities notes are conservative estimates based on early test results using Sodium Hypochlorite with 3' of lift. As longer-term data is gathered, capacity ratings will be adjusted.
See Page 59 for
Code Configuration
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 60
60_60 3/30/14 10:33 AM Page 60
Pumps
AX6 FastPrime Liquid Ends 0.02 to 2.0 GPH (0.08 to 7.6 l/h) 240 SPM Max. Liquifram Size Code 3 50 psi (3.4 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End A86 A76 A16 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
930SI $818.44 $993.22 $904.64 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 $106.08
935SI 820.81 995.58 907.01 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-833 139.36
938SI 812.52 987.32 898.74 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 106.08
939SI 831.42 1,006.21 917.64 Acrylic/PVDF PTFE Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-939 106.08
Molded FastPrime Liquid Ends (Double Ball Check Valves)
832SI 755.84 930.63 842.05 PVDF/PVDF Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 106.08
833SI 795.99 970.78 882.21 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-833 139.36
838SI 714.51 889.30 800.71 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 106.08
Roytronic® Series “A” Metering Pumps FastPrime Liquid Ends
FastPrime Liquid Ends feature a manual bleed valve for easy start-up.
* See model code configuration on page 59 for proper port number and item description.
AutoPrime heads have 3 check valves: Suction on the bottom; Discharge on the front; AutoPrime bleed on the top. By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to
be returned to the chemical supply. The result is the assurance that any gas in the head is automatically relieved thus eliminating air-binding.
NOTE: Capacities notes are conservative estimates based on early test results using Sodium Hypochlorite with 3' of lift. As longer-term data is gathered, capacity ratings will be adjusted.
ADX1 FastPrime 0.002 to 0.21 GPH (0.01 to 0.8 l/h) 120 SPM Max. Liquifram Size Code 1 250 psi (17.2 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD91 AD81 AD21 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
910SI $1,103.96 $934.80 $789.43 Acrylic/PVDF Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 $95.00
915SI 1,106.91 937.44 792.07 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-813 128.00
918SI 1,099.56 930.40 785.02 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.00
919SI 1,113.66 944.49 799.12 Acrylic/PVDF PTFE Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-919 95.00
917NP 1,204.41 1,035.24 889.87 316SS/316SS 316SS Fluorofilm™ 316SS/PTFE – 1
⁄4" NPT RPM-917 173.00
Molded FastPrime Liquid Ends (Double Ball Check Valves)
812SI 1,055.51 886.34 740.97 PVDF/PVDF Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.00
813SI 1,085.46 916.30 770.93 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-813 128.00
818SI 1,022.91 853.74 708.37 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-812 95.00
Molded FastPrime Liquid Ends (Single Ball Check Valves)
718SI 996.48 827.31 681.94 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. PRM-718 92.00
ADX4 FastPrime 0.005 to 0.50 GPH (0.02 to 1.9 l/h) 120 SPM Max. Liquifram Size Code 2 250 psi (17.2 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD94 AD84 AD24 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
920SI $1,113.66 $944.49 $799.12 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄4" O.D. RPM-822 $103.00
925SI 1,116.30 947.14 801.76 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-823 137.00
928SI 1,109.25 940.09 794.71 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄4" O.D. RPM-822 103.00
929SI 1,123.35 954.19 808.81 Acrylic/PVDF PTFE Fluorofilm™ Polyprel® 4FV PE 1
⁄4" O.D. RPM-929 103.00
927NP 1,214.10 1,044.93 899.56 316SS/316SS 316SS Fluorofilm™ 316SS/PTFE – 1
⁄4" NPT RPM-927 173.00
Molded FastPrime Liquid Ends (Double Ball Check Valves)
822SI 1,065.20 896.04 750.66 PVDF/PVDF Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄4" O.D. RPM-822 103.00
823SI 1,095.15 925.99 780.62 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 1
⁄4" O.D. RPM-823 137.00
828SI 1,032.60 863.44 718.06 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄4" O.D. RPM-822 103.00
Molded FastPrime Liquid Ends (Single Ball Check Valves)
728SI 1,006.17 837.00 691.63 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. PRM-728 100.00
728NI 958.59 789.43 644.05 PVC/PVC Ceramic Fluorofilm™ Polyprel® – PE 3
⁄8" O.D. PRM-728 100.00
High Viscosity FastPrime Liquid Ends
624VI 1,122.47 953.30 807.93 PP/PP 316SS Fluorofilm™ PTFE – PE .5" O.D. RPM-624 98.00
 Vinyl .938" O.D.
626VI 1,119.82 950.66 805.29 Acrylic/PP 316SS Fluorofilm™ Viton®/Polyprel® – PE .5" O.D. RPM-626 98.00
 Vinyl .938" O.D.
FastPrime Liquid Ends feature a manual bleed valve for easy start-up.
Roytronic® EXCEL™ Series “AD” Electronic Metering Pumps FastPrime Liquid Ends
AD 2X*
Series AD 8X*
AD 9X*
Strokes/Minute
(Adjustable) Min. 1
Strokes/Minute
(Adjustable) Max. 120
Stroke Length (Adjustable)
Recommended Min. 20%
Average Input Power
@ Max. Speed 25 watts
Shipping Wt. 10 lbs (4.75 kg)
SPECIFICATIONS DIMENSIONS
AutoPrime Liquid Ends
FastPrime Liquid Ends
See Page 59 for
Code Configuration
See Page 59 for
Code Configuration
*Where X = output mode
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 61
61_61 3/30/14 10:34 AM Page 61
Pumps
ADX5 Standard FastPrime Liquid Ends 0.01 to 1.0 GPH (0.04 to 3.8 l/h) 120 SPM Max. Liquifram Size Code 3 110 psi (7.6 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD95 AD85 AD25 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
930SI $1,118.58 $948.67 $802.65 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 $106.00
935SI 1,121.24 951.33 805.31 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-833 140.00
938SI 1,114.16 944.25 798.23 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 106.00
939SI 1,128.32 958.41 812.39 Acrylic/PVDF PTFE Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-939 106.00
937NP 1,219.47 1,049.56 903.54 316SS/316SS 316SS Fluorofilm™ 316SS/PTFE – 1
⁄4" NPT RPM-937 173.00
Molded FastPrime Liquid Ends (Double Ball Check Valves)
832SI 1,069.91 900.00 753.98 PVDF/PVDF Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 106.00
833SI 1,100.00 930.09 784.07 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-833 140.00
838SI 1,037.17 867.26 721.24 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-832 106.00
Molded FastPrime Liquid Ends (Single Ball Check Valves)
738SI 1,010.62 840.71 694.69 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. PRM-738 103.00
738NI 962.83 792.92 646.90 PVC/PVC Ceramic Fluorofilm™ Polyprel® – PE 3
⁄8" O.D. PRM-738 103.00
High Viscosity FastPrime Liquid Ends
634VI 1,127.43 957.52 811.50 PP/PP 316SS Fluorofilm™ PTFE – PE .5" O.D. RPM-634 115.00
 Vinyl .938" O.D.
636VI 1,124.78 954.87 808.85 Acrylic/PP 316SS Fluorofilm™ Viton®/Polyprel® – PE .5" O.D. RPM-636 115.00
 Vinyl .938" O.D.
Roytronic® EXCEL™ Series “AD” Electronic Metering Pumps FastPrime Liquid Ends
FastPrime Liquid Ends feature a manual bleed valve for easy start-up.
ADX6 Standard FastPrime Liquid Ends 0.02 to 2.0 GPH (0.08 to 7.6 l/h) 120 SPM Max. Liquifram Size Code 4 50 psi (3.4 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD96 AD86 AD26 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
Machined FastPrime Liquid Ends
940SI $1,146.02 $976.11 $830.09 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-842 $123.00
945SI 1,148.67 978.76 832.74 PP/PP Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-843 156.00
948SI 1,141.59 971.68 825.66 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-842 123.00
949SI 1,155.75 985.84 839.82 Acrylic/PVDF PTFE Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-949 123.00
947NP 1,246.90 1,076.99 930.97 316SS/316SS 316SS Fluorofilm™ 316SS/PTFE – 1
⁄4" NPT RPM-937 173.00
Molded FastPrime Liquid Ends (Double Ball Check Valves)
842SI 1,097.35 927.43 781.42 PVDF/PVDF Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-842 123.00
843SI 1,127.43 957.52 811.50 PVDF/PVDF Ceramic Fluorofilm™ PTFE 4FV PE 3
⁄8" O.D. RPM-843 156.00
848SI 1,064.60 894.69 748.67 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-842 123.00
Molded FastPrime Liquid Ends (Single Ball Check Valves)
748SI 1,038.05 868.14 722.12 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. PRM-748 119.00
748NI 990.27 820.35 674.34 PVC/PVC Ceramic Fluorofilm™ Polyprel® – PE 3
⁄8" O.D. PRM-748 119.00
High Viscosity FastPrime Liquid Ends
644VI 1,154.87 984.96 838.94 PP/PP 316SS Fluorofilm™ PTFE – PE .5" O.D. RPM-644 130.00
 Vinyl .938" O.D.
646VI 1,152.21 982.30 836.28 Acrylic/PP 316SS Fluorofilm™ Viton®/Polyprel® – PE .5" O.D. RPM-646 130.00
 Vinyl .938" O.D.
Roytronic® EXCEL™ Series “AD” Electronic Metering Pumps AutoPrime Liquid Ends (Degassing)
AutoPrime Liquid Ends are used in applications with off-gassing liquids such as Sodium Hypochlorite.
ADX1 AutoPrime 0.0015 to 0.15 GPH (0.006 to 0.15 l/h) 120 SPM Max. Liquifram Size Code 1 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD91 AD81 AD21 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
910HI $1,156.64 $986.73 $840.71 Acrylic/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-910A $130.00
918HI 1,154.87 982.30 836.28 PVC/PVC Ceramic Fluorofilm™ PTFE/Polyprel® 4FV PE 1
⁄4" O.D. RPM-910A 130.00
ADX4 AutoPrime 0.0033 to 0.33 GPH (0.012 to 1.2 l/h) 120 SPM Max. Liquifram Size Code 2 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD94 AD84 AD24 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
920HI $1,166.37 $996.46 $850.44 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄4" O.D. RPM-920A $130.00
928HI 1,161.95 992.04 846.02 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄4" O.D. RPM-920A 130.00
ADX5 AutoPrime 0.008 to 0.8 GPH (0.03 to 3.0 l/h) 120 SPM Max. Liquifram Size Code 3 110 psi (7.6 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD95 AD85 AD25 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
930HI $1,166.37 $996.46 $850.44 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-930A $141.00
938HI 1,161.95 992.04 846.02 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-930A 141.00
ADX6 AutoPrime 0.018 to 1.8 GPH (0.068 to 6.8 l/h) 120 SPM Max. Liquifram Size Code 4 50 psi (3.4 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End AD95 AD85 AD25 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
940HI $1,193.81 $1,023.89 $877.88 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-940A $151.00
948HI 1,189.38 1,019.47 873.45 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-940A 151.00
NOTES: AutoPrime heads have 3 check valves: Suction on the bottom; Discharge on the front; AutoPrime bleed on the top. By design, a repeatable portion of the process fluid continuously bleeds through the top check
valve to be returned to the chemical supply. The result is the assurance that any gas in the head is automatically relieved thus eliminating air-binding.
Capacities notes are conservative estimates based on early test results using Sodium Hypochlorite with 3' of lift. As longer-term data is gathered, capacity ratings will be adjusted.
See Page 59 for Code Configuration
See Page 59 for Code Configuration
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 62
62_62 3/30/14 10:36 AM Page 62
Pumps
MODEL CODE CONFIGURATION
Control & Output Code
Manual Control
Speed (stroking frequency) and stroke length
manually adjustable
 B11 – 1.6 GPH (6.1 l/h) – 150 psi (10.30 Bar)
 B12 – 2.5 GPH (9.5 l/h) – 100 psi (6.90 Bar)
 B13 – 4.5 GPH (17.0 l/h) – 50 psi (3.50 Bar)
 B14 – 7.0 GPH (26.5 l/h) – 30 psi (2.07 Bar)
Instrument Responsive / Manual Control
Manual adjustment features of Series B1 plus switch
conversion to external control for automatic systems.
 B71 – 1.6 GPH (6.1 l/h) – 150 psi (10.30 Bar)
 B72 – 2.5 GPH (9.5 l/h) – 100 psi (6.90 Bar)
 B73 – 4.5 GPH (17.0 l/h) – 50 psi (3.50 Bar)
 B74 – 7.0 GPH (26.5 l/h) – 30 psi (2.07 Bar)
 B91 – 1.6 GPH (6.1 l/h) – 150 psi (10.30 Bar)
 B92 – 2.5 GPH (9.5 l/h) – 100 psi (6.90 Bar)
 B93 – 4.5 GPH (17.0 l/h) – 50 psi (3.50 Bar)
 B94 – 7.0 GPH (26.5 l/h) – 30 psi (2.07 Bar)
Voltage Code
1 – 120 VAC, US Plug
2 – 240 VAC, US Plug
3 – 220-240 VAC, DIN Plug
5 – 240-250 VAC, UK Plug
6 – 240-250 VAC, Aust/NZ Plug
7 – 220-240 VAC, Swiss Plug
Liquid End Code
See accompanying pages for options
Model B9 2 1 - 392SI Roytronic® Series “B” Metering Pumps
 Strokes/Minute Stroke Length Average
 (Adjustable) (Adjustable) Input Power
 Series Min. Max. Recommended Min. @ Max. Speed Shipping Wt.
 B11, B71, B91
 B12, B72, B92 1 100 10% 29 watts 15 lbs (6.9 kg)
 B13, B73, B93
 B14, B74, B94
UL
B Series Chemical metering pumps are positive displacement,
Liquifram™ type pumps that are UL and CUL approved. Output
volume is fully adjustable while pumps are in operation from
zero to maximum capacity of 7.0 GPH.
SERIES B1 – Adjustable stroke length and freauency
SERIES B7 – Control of Series B7 metering pumps is selectable between
internal and external pulsing by means of a 3-position center-off switch. Stroke length is adjustable by means of readily
accessible dial knob. When in external pulsed mode, Series B7 units will accept signals without the use of electrical timer
or internal timer. Pressure capacity is adjustable to reduce noise, vibration and wear.
SERIES B9 – 4-20mA or Pulse
Series B9 metering pumps have a clear liquid crystal display. Control is selectable between internal and external pulsing
by means of a tactile keypad. Internal stroke frequency is adjustable from 1 stroke per hour to 100 strokes per minute.
Pressure capacity is keypad adjustable to reduce noise, vibration and wear. Metering pump is capable of dividing or multiplying
pulse inputs from 1 to 999 or responding directly or inversely to a 4-20mA input signal.
n AUTOMATIC PRESSURE RELIEF
n CHECK VALVES AND TUBING – Improved connections!
n A total of 16 ft (4.8 m) of polyethylene tubing is provided.
1. Type 316 stainless steel or PTFE may be specified.
2. Hypalon®, PTFE or Polyprel® may be specified.
3. PVDF, PVC, Polypropylene, or Type 316 stainless steel may be specified.
4. PVDF, Polypropylene, or Type 316 stainless steel may be specified.
5. 6 ft (1.8 m) of vinyl suction tubing may be specified in place of polyethylene
for the suction side only. 1
⁄4" or 1
⁄2" pipe thread may be specified.
9 Series pumps
for 4-20mA or
pulse multiply or divide!
9 Series pumps
for 4-20mA or
pulse multiply or divide!
BX1 AutoPrime Liquid Ends 0.00 to 1.40 GPH (0.00 to 5.3 l/h) Size Code 0.9 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End B91 B71 B11 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
D90HI $1,308.22 $1,060.87 $983.91 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D98 $111.24
D98HI 1,303.64 1,056.29 979.34 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D98 111.24
BX2 AutoPrime Liquid Ends 0.00 to 2.3 GPH (0.00 to 8.7 l/h) Size Code 0.9 100 psi (6.8 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End B92 B72 B12 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
D90HI $1,308.22 $1,060.87 $983.91 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D98 $111.24
D98HI 1,303.64 1,056.29 979.34 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D98 111.24
BX3 AutoPrime Liquid Ends 0.00 to 4.0 GPH (0.00 to 15.1 l/h) Size Code 1.8 50 psi (3.4 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End B93 B73 B13 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
D60HI $1,308.22 $1,060.87 $983.91 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D68 $114.60
D68HI 1,303.64 1,056.29 979.34 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D68 114.60
BX4 AutoPrime Liquid Ends 0.00 to 6.8 GPH (0.00 to 25.7 l/h) Size Code 3.0 30 psi (2.07 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End B94 B74 B14 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
D10HI $1,435.57 $1,188.22 $1,111.26 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄2" O.D. RPM-D18 $121.34
D18HI 1,430.98 1,183.63 1,106.68 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄2" O.D. RPM-D18 121.34
By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to be returned to the chenmical supply.
Roytronic® Series “B” Metering Pumps AutoPrime Liquid Ends (Degassing)
AutoPrime Liquid Ends are used in applications with off-gassing liquids such as Sodium Hypochlorite.
www.fwwebb.com/plastics
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 63
63_63 3/30/14 10:38 AM Page 63
Pumps
BX1 Standard Liquid Ends 0.00 to 1.6 GPH (0.00 to 6.1 l/h) Size Code 0.9 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End B91 B71 B11 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
392SI $1,211.87 $964.56 $887.61 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 $109.17
393SI 1,243.02 995.70 918.75 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .375" O.D. RPM-393 145.56
398SI 1,179.81 932.49 855.55 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 109.17
490SI 1,260.42 1,013.10 936.16 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 109.17
495SI 1,262.25 1,014.93 937.98 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .375" O.D. RPM-495 109.17
498SI 1,255.84 1,008.52 931.58 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 109.17
499SI 1,270.50 1,023.18 946.24 Acrylic/PVC .375 PTFE Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-490F 93.74
 Spare Parts Kit
85HV 1,260.42 1,013.10 936.16 Polypropylene 316 SS Fluorofilm™ PTFE – PE .5" O.D. SP-85HV 104.76
 Vinyl .938" O.D.
BX2 Standard Liquid Ends 0.00 to 2.5 GPH (0.00 to 9.5 l/h) Size Code 0.9 100 psi (6.9 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End B92 B72 B12 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
392SI $1,211.87 $964.56 $887.61 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 $109.17
393SI 1,243.02 995.70 918.75 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .375" O.D. RPM-393 145.56
398SI 1,179.81 932.49 855.55 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 109.17
490SI 1,260.42 1,013.10 936.16 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 109.17
495SI 1,262.25 1,014.93 937.98 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .375" O.D. RPM-495 109.17
498SI 1,255.84 1,008.52 934.58 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-392/398 109.17
 Spare Parts Kit
85HV 1,260.42 1,013.10 936.16 Polypropylene 316 SS Fluorofilm™ PTFE – PE .5" O.D. SP-85HV 104.76
 Vinyl .938" O.D.
BX3 Standard Liquid Ends 0.00 to 4.5 GPH (0.00 to 17.0 l/h) Size Code 1.8 50 psi (3.4 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End B93 B73 B13 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
362SI $1,211.87 $964.56 $887.61 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 $112.48
363SI 1,243.02 995.70 918.75 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .375" O.D. RPM-363 144.76
368SI 1,179.81 932.49 855.55 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
460SI 1,260.42 1,013.10 936.16 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
465SI 1,262.25 1,014.93 937.98 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .375" O.D. RPM-465 112.48
468SI 1,255.84 1,008.52 934.58 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
 Spare Parts Kit
75HV 1,260.42 1,013.10 936.16 Polypropylene 316 SS Fluorofilm™ PTFE – PE .5" O.D. SP-75HV 104.76
BX4 Standard Liquid Ends 0.00 to 7.0 GPH (0.00 to 26.5 l/h) Size Code 3.0 30 psi (2.07 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End B94 B74 B14 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
312SI* $1,339.20 $1,091.87 $1,014.93 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 $131.23
313SI* 1,370.33 1,123.02 1,046.07 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .5" O.D. RPM-313 165.41
318SI* 1,307.14 1,059.82 982.87 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 131.23
410SI* 1,387.75 1,140.43 1,063.48 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 131.23
415SI* 1,389.58 1,142.25 1,065.31 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .5" O.D. RPM-415 131.23
418SI* 1,383.16 1,135.84 1,058.90 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 131.23
419SI* 1,397.81 1,150.50 1,073.55 Acrylic/PVC .375 PTFE Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-410F 109.17
* These liquid ends use 3
⁄8" diameter valve balls. Pump output may be reduced in some applications. Size 3.0 liquid ends use the accessory type AutoPrime valve.
Roytronic® Series “B” Metering Pumps Standard Liquid Ends
Quick Spec
n Corrosion resistant PVDF
n Senses pulsating metering pump flow
n Adjustable, in-line
n Flow range:
ml/stroke Max. – 0.1 - 5.0
Max. LMI Pump Output – 7.9 GPH
(30.0 l/h)
n Usable as Adjustable Flow Switch for
non-pulsating flow
n Economical
n For LMI Pumps with 300, 400, 700,
800, and 900 Series Liquid Ends
Digi-Pulse™ Flow Monitor Series FM-PRO
Pulsating flow of your pump can be monitored and transmitted using the LMI Digi-Pulse™ Flow Monitor. Designed to
electrically signal a low flow or no flow condition, you can be assured of your pumping performance; an advantage
when working with pulsating or very low flows. A transmitter can be connected to a remote counting or recording
device. The FM-PRO-9 transmitter is wired to be plugged directly into the receptacle, mounted in the Series B9 or
C9 pump housing. Plug the FM-ROY-9 directly into the flow monitor input (4-pin connection) on the ROYTRONIC®
EXCEL Series A+9 and A+N metering pump housing. The FM-ROY is adjustable to any desired pulsating flow rate
within its range.
Configurations
 Model # Connection Price
FM- PRO Supplied with single ball lower valve fitting (for use with legacy 3FVs or 4FVs) $279.84
FM-PRO-9 Supplied with single ball lower valve fitting (for use with legacy 3FVs or 4FVs 290.44
 and Series B9 or C9 pumps)
FM-ROY Supplied with double ball lower valve fitting (for use with new 4FVs and 279.84
 ROYTRONIC® Series A metering pumps)
FM-ROY-1 Supplied with double ball lower valve fitting (for use with new 4FVs and C9 pumps) 279.84
FM-ROY-9 Supplied with double ball lower valve fitting (for use with new 4FVs and 290.44
 ROYTRONIC® EXCEL A+9 and A+N metering pumps)
See Page 63 for Code Configuration
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 64
64_64 3/30/14 10:39 AM Page 64
OPERATION
1. Follow arrangement indicated in either fig. 1 or 2.
2. With calibration cylinder full, start me ter ing pump and run at 100% output
ad just ment until pump is fully primed.
3. With pump installed under actual op er at ing conditions, operate pump until all air
is exhausted from suction line and pump head. Refill calibration cylinder.
4. Start the pump and using a stop watch or timer, calculate the volume pumped
over time.
Pumps
MODEL CODE CONFIGURATION
Control & Output Code
Manual Control
Speed (stroking frequency) and stroke length
manually adjustable
 C10 – 1.3 GPH (4.9 l/h) 300 psi (20.7 Bar)
 C11 – 2.5 GPH (9.5 l/h) 150 psi (10.3 Bar)
 C12 – 4.0 GPH (15.1 l/h) 100 psi (6.9 Bar)
 C13 – 8.0 GPH (30 l/h) 60 psi (4.1 Bar)
 C14 – 20 GPH (76 l/h) 25 psi (1.7 Bar)
Instrument Responsive / Manual Control
Manual adjustment features of Series C1 plus switch
conversion to external control for automatic systems.
 C70 – 1.3 GPH (4.9 l/h) 300 psi (20.7 Bar)
 C71 – 2.5 GPH (9.5 l/h) 150 psi (10.3 Bar)
 C72 – 4.0 GPH (15.1 l/h) 100 psi (6.9 Bar)
 C73 – 8.0 GPH (30 l/h) 60 psi (4.1 Bar)
 C74 – 20 GPH (76 l/h) 25 psi (1.7 Bar)
 C76 – 4.0 GPH (15.1 l/h) 175 psi (12.1 Bar)
 C77 – 10 GPH (38 l/h) 80 psi (5.5 Bar)
 C78 – 25 GPH (95 l/h) 30 psi (2.07 Bar)
 C90 – 1.3 GPH (4.9 l/h) 300 psi (20.7 Bar)
 C91 – 2.5 GPH (9.5 l/h) 150 psi (10.3 Bar)
 C92 – 4.0 GPH (15.1 l/h) 100 psi (6.9 Bar)
 C93 – 8.0 GPH (30 l/h) 60 psi (4.1 Bar)
 C94 – 20 GPH (76 l/h) 25 psi (1.7 Bar)
Voltage Code
1 – 120 VAC, US Plug
2 – 240 VAC, US Plug
3 – 220-240 VAC, DIN Plug
5 – 240-250 VAC, UK Plug
6 – 240-250 VAC, Aust/NZ Plug
7 – 220-240 VAC, Swiss Plug
Liquid End Code
See accompanying pages for options
Model C9 2 1 - 363SI
 Strokes/Minute (Adjustable) Stroke Length (Adjustable) Average Input Power
 Series Min. Max. Recommended Min. @ Max. Speed Shipping Wt.
C10, C11, C12, C13, C14
C70, C71, C72, C73, C74 1 100 10% 44 watts 20 lbs (9.1 kg)
C90, C91, C92, C93, C94
 C76, C77, C78 1 100 10% 87 watts 28 lbs (12.7 kg)
UL
C Series chemical metering pumps are positive displacement,
Liquifram™ type pumps that are UL and CUL approved. Output
volume is adjustable while pumps are in operation from zero to
maximum capacity of 25.0 GPH.
Chemical metering pumps are capable, without a hydraulically
backed diaphragm, of injecting solutions against pressures up to
300 PSI. See chart for actual information.
SERIES C1 – Adjustment is by means of readily accessible dial
knobs, one for changing stroke length and the other for changing
stroke frequency (speed).
SERIES C7 – Control of Series C7 metering pumps are selectable
between internal and external pulsing by means of a 3-
position center-off switch. Stroke length is adjustable by means of
readily accessible dial knob. When in external pulsed mode,
Series C7 units accept signals without the use of electrical timer
or internal timer. Pressure capacity is adjustable to reduce noise,
vibration and wear.
SERIES C9 – Series C9 metering pumps have a clear liquid
crystal display. Control is selectable between internal and external
pulsing by means of a tactile keypad. Internal stroke frequency
is adjustable from 1 stroke per hour to 100 strokes per
minute. Pump is capable of dividing or multiplying pulse inputs
from 1 to 999 or responding directly or inversely to a
4-20mA input signal.
n AUTOMATIC PRESSURE RELIEF
n CHECK VALVES AND TUBING – Improved connections!
NOTE: C76, C77 and C78 are not UL or CUL approved.
9 Series pumps
for 4-20mA or
pulse multiply or divide!
9 Series pumps
for 4-20mA or
pulse multiply or divide!
CX1 AutoPrime Liquid Ends 0.00 to 2.3 GPH (0.00 to 8.7 l/h) Size Code 1.8 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End C91 C71 C11 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
D60HI $1,587.16 $1,330.10 $1,255.09 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D68 $112.36
D68HI 1,582.58 1,325.53 1,250.52 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D68 112.36
CX2 AutoPrime Liquid Ends 0.00 to 3.8 GPH (0.00 to 14.4 l/h) Size Code 1.8 100 psi (6.9 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End C92 C72 C12 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
D60HI $1,587.16 $1,330.10 $1,255.09 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D68 $112.36
D68HI 1,582.58 1,325.53 1,250.52 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 3
⁄8" O.D. RPM-D68 112.36
CX3 AutoPrime Liquid Ends 0.00 to 7.8 GPH (0.00 to 29.5 l/h) Size Code 3.0 60 psi (4.1 Bar)
Liquid Prices Materials of Construction Accs. Tubing& RPM PRO PAC
End C93 C73 C13 Head/Fittings Balls Liquifram™ Seat/O-ring Valve Connections Kit # Kit Price
D10HI $1,670.40 $1,413.35 $1,338.34 Acrylic/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄2" O.D. RPM-D18 $118.97
D18HI 1,665.83 1,408.77 1,333.76 PVC/PVC Ceramic Fluorofilm™ Polyprel® 4FV PE 1
⁄2" O.D. RPM-D18 118.97
By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to be returned to the chenmical supply.
Roytronic® Series “C” Metering Pumps AutoPrime Liquid Ends (Degassing)
AutoPrime Liquid Ends are used in applications with off-gassing liquids such as Sodium Hypochlorite.
Roytronic® Series “C” Metering Pumps Calibration Cylinders
Griffco calibration cylinders are
designed to enhance the performance
of chemical feed systems
by providing a verification of
the flow rate of the chemical
feed pump. Robust construction
of clear PVC with an easy to
read graduation in mls and gph.
 Sealed Loose Capacity
 Top* Top** mL GPH Conn. Price EZ-Clean Price
CC0100S CC0100L 100 3.2 1
⁄2" $72.93 CCO100EZ $83.83
CC0200S CC0200L 200 6.4 1
⁄2" 83.98 CCO200EZ 96.52
CC0500S CC0500L 500 16 3
⁄4" 98.34 CCO500EZ 113.04
CC1000S CC1000L 1000 32 3
⁄4" 118.23 CCO1000EZ 135.89
CC2000S CC2000L 2000 64 1" 182.32 CCO2000EZ 209.56
CC4000S CC4000L 4000 128 1" 253.04 CCO4000EZ 290.85
*Sealed Top c/w over flow connection **Open top with dust cap
Fig. 1
Cal i bra tion
Cylinder
Timer
Fig. 2
Chemical
Metering
Pump
Quick Spec
n High Reliability/Low Cost
n Clear Easy-View Tube
n Robust Construction
n Direct GPH Readout
n Optional EZ-Clean Model
n High Contrast Graduation Markings
n Sealed Top with Overflow Connection
n Optional Open Top with Dust Cap
Control & Output Code
Voltage/Cord Code
Liquid End Type Code
To convert LPH or GPH
use this formula:
LPH = (volume
draw time) x 3.6
GPH = (volume
draw time) x 0.952
Note: Max. cylinder
pressure is 15 psi.
100ML T0 20,000ML
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 65
65_65 3/30/14 10:40 AM Page
Pumps
CX0 Standard Liquid Ends 0.00 to 1.3 GPH (0.00 to 4.9 l/h) Size Code 0.9 300 psi (20.7 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End C90 C70 C10 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
498SP $1,535.35 $1,278.25 $1,203.22 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV Pipe 1
⁄4" NPT M RPM-392/398 $109.17
CX1 Standard Liquid Ends 0.00 to 2.5 GPH (0.00 to 9.5 l/h) Size Code 1.8 150 psi (10.3 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End C91 C71 C11 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
362SI $1,491.43 $1,234.32 $1,159.29 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 $112.48
363SI 1,522.54 1,265.43 1,190.40 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .375" O.D. RPM-363 147.76
368SI 1,459.41 1,202.29 1,127.26 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
460SI 1,539.93 1,282.81 1,207.78 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
465SI 1,541.76 1,284.65 1,209.62 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .375" O.D. RPM-465 112.48
468SI 1,535.35 1,278.25 1,203.22 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
 Spare Parts Kit
75HV 1,539.93 1,282.81 1,207.78 Polypropylene 316 SS Fluorofilm™ PTFE – PE .5" O.D. SP-75HV 104.76
 Vinyl .938" O.D.
277 1,639.66 1,382.56 1,307.53 316 SS 316 SS Fluorofilm™ 316 SS – Pipe 1
⁄4" NPT M N/A N/A
CX2 Standard Liquid Ends 0.00 to 4.0 GPH (0.00 to 15.1 l/h) Size Code 1.8 100 psi (6.9 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End C92 C72 C12 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
362SI $1,491.43 $1,234.32 $1,159.29 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 $112.48
363SI 1,522.54 1,265.43 1,190.40 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .375" O.D. RPM-363 147.76
368SI 1,459.41 1,202.29 1,127.26 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
460SI 1,539.93 1,282.81 1,207.78 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
465SI 1,541.76 1,284.65 1,209.62 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .375" O.D. RPM-465 112.48
468SI 1,535.35 1,278.25 1,203.22 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D. RPM-362/368 112.48
 Spare Parts Kit
75HV 1,539.93 1,282.81 1,207.78 Polypropylene 316 SS Fluorofilm™ PTFE – PE .5" O.D. SP-75HV 104.76
 Vinyl .938" O.D.
277 1,639.66 1,382.56 1,307.53 316 SS 316 SS Fluorofilm™ 316 SS – Pipe 1
⁄4" NPT M N/A N/A
CX3 Standard Liquid Ends 0.00 to 8.0 GPH (0.00 to 30.3 l/h) Size Code 3.0 60 psi (4.1 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End C93 C73 C13 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
312SI* $1,574.71 $1,317.59 $1,242.56 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 $131.23
313SI* 1,605.81 1,348.70 1,273.67 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .5" O.D. RPM-313 165.41
318SI* 1,542.68 1,285.57 1,210.54 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 131.23
410SI* 1,623.19 1,366.09 1,291.06 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 131.23
415SI* 1,625.02 1,367.91 1,292.88 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .5" O.D. RPM-415 131.23
418SI* 1,618.62 1,361.50 1,286.47 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D. RPM-312/318 131.23
 Spare Parts Kit
20S 1,649.74 1,392.62 1,317.59 Acrylic/PVC Ceramic Fluorofilm™ FKM 4FV PE .5" O.D. SP-20 115.79
 Vinyl .5" O.D.
25HV 1,634.17 1,377.07 1,302.04 Polypropylene 316 SS Fluorofilm™ PTFE – PE .5" O.D. SP-25HV 120.20
 Vinyl .938" O.D.
26S 1,646.07 1,388.95 1,313.92 PVC Ceramic Fluorofilm™ FKM 4FV PE .5" O.D. SP-26 134.53
27 2,297.54 3,123.25 1,965.40 316 SS 316 SS Fluorofilm™ PTFE – Pipe 1
⁄2" NPT M SP-27 125.71
CX4 Standard Liquid Ends 0.00 to 20.0 GPH (0.00 to 75.7 l/h) Size Code 6.0 25 psi (1.7 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End C94 C74 C14 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
30 $1,762.26 $1,505.17 $1,430.14 Acrylic/PVC Ceramic Fluorofilm™ PTFE – PE .5" O.D. SP-U6 $177.54
 Vinyl .5" O.D.
35T 1,779.66 1,523.46 1,447.51 Polypropylene Ceramic Fluorofilm™ PTFE – PE .5" O.D. SP-U6 177.54
36 1,757.70 1,501.50 1,425.55 PVC Ceramic Fluorofilm™ PTFE – PE .5" O.D. SP-U6 177.54
C76 Standard Liquid Ends 0.00 to 4.0 GPH (0.00 to 15.1 l/h) Size Code 1.8 175 psi (12.1 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End C76 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
74S $1,425.37 PVC Ceramic Fluorofilm™ PTFE 4FV Pipe 1
⁄4" NPT M SP-U2 $76.09
468SP 1,411.83 PVC/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV Pipe 1
⁄4" NPT M RPM-362/368 112.48
C77 Standard Liquid Ends 0.00 to 10.0 GPH (0.00 to 38.0 l/h) Size Code 3.0 80 psi (5.5 Bar)
Liquid Prices Materials of Construction Cartridge Valve Accs. Tubing& RPM PRO PAC
End C77 Head/Fittings Balls Liquifram™ or Seal Ring Valve Connections Kit # Kit Price
20HV $1,444.77 Acrylic/PP 316 SS Fluorofilm™ FKM – PE .5" O.D. SP-20HV $112.48
 Vinyl .938" O.D.
20S 1,526.21 Acrylic/PVC Ceramic Fluorofilm™ FKM 4FV PE .5" O.D. SP-20 115.79
 Vinyl .5" O.D.
25HV 1,511.13 Polypropylene 316 SS Fluorofilm™ PTFE – PE .5" O.D. SP-25HV 120.20
 Vinyl .938" O.D.
25T 1,463.07 Polypropylene Ceramic Fluorofilm™ PTFE – PE .5" O.D. SP-U5 134.53
29 1,446.61 UHMW PE Ceramic Fluorofilm™ FKM – PE .5" O.D. SP-29 112.48
Roytronic® Series “C” Metering Pumps See Code Configuration on page 65.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 66
66_66 3/30/14 10:42 AM Page 66
EW-F CONTROL FEATURES
n Feed Accuracy: 1800:1 Turndown
n 1:1 Digital input for proportional control
n Pulse output synchronous with pump operation
n Digital input to stop pump operation and activate
stop output for alarm or remote notification
EW-Y CONTROL FEATURES OF EW-F FEATURES +
n Analog Input Control: Fixed or scalable 4-20 mA input
n Digital input with multiply and divide.
n Feed Verification – Posiflow provides feedback to verify operation
n Quick-Prime: Hold 2 keys to prime quickly w/o adjusting
application settings
n Keypad Lock-out: Keypad functions can be locked out for security
n Easy Draw-down Calibration: Pump quickly determines
volume per stroke
n Change “F” in part number to a “Y” and add $229.41
EK SERIES: RUGGED & WATERPROOF
EK Series Pumps are the world’s first electronic metering
pumps with an IP67 rating (able to operate submerged under
3 ft. of water for up to 30 minutes).
CONTROL FEATURES
n 1800:1 Turndown ratio
n 1:1 Digital input for proportional control
n External stop input
 Max Max Press. Head/ Seats/ OD Tubing Spare
EW Model* Price EK Model* Price Output GPH PSI Fittings Balls Seals Size (in) Parts Kit Kit Price
EWB11F1-TC $565.65 EKB11R1-TC $605.37 0.6 150 PVDF Ceramic FKM 3/8 X11TC-PK $48.86
EWB11F1-VC 437.69 EKB11R1-VC 477.43 0.6 150 PVC Ceramic FKM 3/8 X11VC-PK 37.80
EWB11F1-VCA 669.51 EKB11R1-VCA 528.43 0.6 110 PVC Ceramic FKM 3/8 X11VCA-PK 45.16
EWB11F1-VE 437.69 EKB11R1-VE 477.43 0.6 150 PVC Ceramic EPDM 3/8 X11VE-PK 37.80
EWB11F1-VF 437.69 EKB11R1-VF 477.43 0.6 150 PVC Ceramic EPDM 3/8 X11VF-PK 37.80
EWB16F1-TC 591.62 EKB16R1-TC 631.33 1.0 105 PVDF Ceramic FKM 3/8 X16TC-PK 48.86
EWB16F1-VC 463.64 EKB16R1-VC 503.39 1.0 105 PVC Ceramic FKM 3/8 X16VC-PK 37.80
EWB16F1-VCA 514.64 EKB16R1-VCA 554.37 1.0 65 PVC Ceramic FKM 3/8 X16VCA-PK 45.16
EWB16F1-VE 463.64 EKB16R1-VE 503.39 1.0 105 PVC Ceramic EPDM 3/8 X16VE-PK 37.80
EWB16F1-VF 463.64 EKB16R1-VF 503.39 1.0 105 PVC Ceramic EPDM 3/8 X16VF-PK 37.80
EWB21F1-TC 617.40 EKB21R1-TC 657.29 1.8 60 PVDF Ceramic FKM 3/8 X21TC-PK 48.86
EWB21F1-VC 489.49 EKB21R1-VC 529.34 1.8 60 PVC Ceramic FKM 3/8 X21VC-PK 37.80
EWB21F1-VE 489.49 EKB21R1-VE 529.34 1.8 60 PVC Ceramic EPDM 3/8 X21VE-PK 37.80
EWB21F1-VF 489.49 EKB21R1-VF 529.34 1.8 60 PVC Ceramic EPDM 3/8 X21VF-PK 37.80
EWB31F1-TC 687.88 EKB31R1-TC 729.59 3.3 30 PVDF Ceramic FKM 1/2 X31TC-PK 132.30
EWB31F1-VC 559.95 EKB31R1-VC 554.38 3.3 30 PVC Ceramic FKM 1/2 X31VC-PK 37.80
EWB31F1-VE 559.95 EKB31R1-VE 554.38 3.3 30 PVC Ceramic EPDM 1/2 X31VE-PK 37.80
EWB31F1-VF 559.95 EKB31R1-VF 554.38 3.3 30 PVC Ceramic EPDM 1/2 X31VF-PK 37.80
EWC16F1-TC 740.72 EKC16R1-TC 780.58 1.3 150 PVDF Ceramic FKM 3/8 X16TC-PK 48.46
EWC16F1-VC 611.97 EKC16R1-VC 652.65 1.3 150 PVC Ceramic FKM 3/8 X16VC-PK 37.80
EWC16F1-VCA 740.72 EKC16R1-VCA 780.58 1.3 110 PVC Ceramic FKM 3/8 X16VCA-PK 45.16
EWC16F1-VE 611.86 EKC16R1-VE 652.66 1.3 150 PVC Ceramic EPDM 3/8 X16VE-PK 37.80
EWC16F1-VF 611.86 EKC16R1-VF 652.66 1.3 150 PVC Ceramic EPDM 3/8 X16VF-PK 37.80
EWC21F1-TC 766.67 EKC21R1-TC 806.55 2.3 105 PVDF Ceramic FKM 3/8 X21TC-PK 48.86
EWC21F1-VC 637.80 EKC21R1-VC 678.61 2.3 105 PVC Ceramic FKM 3/8 X21VC-PK 37.80
EWC21F1-VCA 688.79 EKC21R1-VCA 729.59 2.3 65 PVC Ceramic FKM 3/8 X21VCA-PK 45.16
EWC21F1-VE 637.80 EKC21R1-VE 678.60 2.3 105 PVC Ceramic EPDM 3/8 X21VE-PK 37.80
EWC21F1-VF 637.80 EKC21R1-VF 678.60 2.3 105 PVC Ceramic EPDM 3/8 X21VF-PK 37.80
EWC31F1-TC 637.80 EKC31R1-TC 872.36 4.3 50 PVDF Ceramic FKM 1/2 X31TC-PK 132.30
EWC31F1-VC 663.78 EKC31R1-VC 703.84 4.3 50 PVC Ceramic FKM 1/2 X31VC-PK 37.80
EWC31F1-VE 663.78 EKC31R1-VE 703.84 4.3 50 PVC Ceramic EPDM 1/2 X31VE-PK 37.80
EWC31F1-VF 663.78 EKC31R1-VF 703.84 4.3 50 PVC Ceramic EPDM 1/2 X31VF-PK 37.80
EWC36F1-TC 898.31 EKC36R1-TC 938.18 6.3 30 PVDF Ceramic FKM 1/2 X36TC-PK 137.56
EWC36F1-VC 689.73 EKC36R1-VC 729.59 6.7 30 PVC Ceramic FKM 1/2 X36VC-PK 37.80
EWC36F1-VE 689.73 EKC36R1-VE 729.59 6.7 30 PVC Ceramic EPDM 1/2 X36VE-PK 37.80
EWC36F1-VF 689.73 EKC36R1-VF 729.59 6.7 30 PVC Ceramic EPDM 1/2 X36VF-PK 37.80
*Models and Spare Parts Kits with PC or PE liquid ends are available at the same prices as VC or VE models. All specs are the same except the Head/Fitting are GFRPP.
EWB/EWC Series & EKB/EKC Series Metering Pumps
EZ Series Metering Pumps
EW Series
EK Series
 Max Output Max Pressure Head/ Seats/ OD tubing Spare
 Item # Price GPH PSI Fittings Valve Balls Seals size (in) Parts Kit Kit Price
EZB11D1-VC $317.87 0.6 150 PVC Ceramic FKM 3
⁄8 X11VC-PK $37.60
EZB11D1-VCA 366.29 0.6 110 PVC Ceramic FKM 3
⁄8 X11VCA-PK 45.16
EZB11D1-VE 317.87 0.6 150 PVC Ceramic EPDM 3
⁄8 X11VE-PK 37.60
EZB11D1-TC 439.37 0.6 150 PVDF Ceramic FKM 3
⁄8 Z11TC-PK 48.30
EZB16D1-VC 327.54 1.0 105 PVC Ceramic FKM 3
⁄8 X16VC-PK 37.60
EZB16D1-VCA 375.96 1.0 65 PVC Ceramic FKM 3
⁄8 X16VCA-PK 45.16
EZB16D1-VE 667.27 1.0 105 PVC Ceramic EPDM 3
⁄8 X16VE-PK 37.60
EZB16D1-TC 449.05 1.0 105 PVDF Ceramic FKM 3
⁄8 Z16TC-PK 48.31
EZB21D1-VC 346.93 1.5 60 PVC Ceramic FKM 3
⁄8 X21VC-PK 37.60
EZB21D1-VE 346.93 1.5 60 PVC Ceramic EPDM 3
⁄8 X21VE-PK 37.60
EZB21D1-TC 468.43 1.5 60 PVDF Ceramic FKM 3
⁄8 Z21TC-PK 48.31
EZB31D1-VC 366.29 3.2 30 PVC Ceramic FKM 1
⁄2 X31VC-PK 37.60
EZB31D1-VE 366.29 3.2 30 PVC Ceramic EPDM 1
⁄2 X31VE-PK 37.60
EZB31D1-TC 521.25 3.2 30 PVDF Ceramic FKM 1
⁄2 Z31TC-PK 71.70
EZC16D1-VC 420.00 1.3 150 PVC Ceramic FKM 3
⁄8 X16VC-PK 37.60
EZC16D1-VCA 468.42 1.3 110 PVC Ceramic FKM 3
⁄8 X16VCA-PK 45.16
EZC16D1-VE 420.00 1.3 150 PVC Ceramic EPDM 3
⁄8 X16VE-PK 37.60
EZC16D1-TC 541.50 1.3 150 PVDF Ceramic FKM 3
⁄8 Z16TC-PK 48.61
EZC21D1-VC 444.65 2 105 PVC Ceramic FKM 3
⁄8 X21VC-PK 37.60
EZC21D1-VCA 493.08 2 65 PVC Ceramic FKM 3
⁄8 X21VCA-PK 45.16
EZC21D1-VE 444.65 2 105 PVC Ceramic EPDM 3
⁄8 X21VE-PK 37.60
EZC21D1-TC 566.15 2 105 PVDF Ceramic FKM 3
⁄8 Z21TC-PK 48.61
EZC31D1-VC 468.42 4.3 50 PVC Ceramic FKM 1
⁄2 X31VC-PK 37.60
EZC31D1-VE 468.42 4.3 50 PVC Ceramic EPDM 1
⁄2 X31VE-PK 37.60
EZC41D1-TC 591.70 4.3 50 PVDF Ceramic FKM 1
⁄2 Z31TC-PK 71.70
EZC36D1-VC 493.96 6.3 30 PVC Ceramic FKM 1
⁄2 X36VC-PK 37.60
EZC36D1-VE 493.96 6.3 30 PVC Ceramic EPDM 1
⁄2 X36VE-PK 37.60
EZC36D1-TE 655.04 6.3 30 PVDF Ceramic FKM 1
⁄2 Z36TC-PK 71.70
Economical On/Off Operation
Certified to
NSF/ANSI61
Walchem and Iwaki have over
100 years of combined metering
pump experience. This partnership
has resulted in the
development of the world’s most advanced line of chemical
metering pumps, the E-Class. Featuring 5 great pump series,
E-Class and LKN pumps are powered by advanced microprocessor
electronics and superior mechanical design.
n Fast Priming: 360 stroke per minute operation and precision
engineered dual check valves on both suction and discharge
fittings guarantee fast priming and prime retention
n Low Energy Consumption: High speed operation results in a
smaller drive that uses much less energy
n Superior Diaphragm & Seal Design for Leak-Free Operation
n Backed by a Comprehensive 2-Year Warranty
NOTES: *Item # and Spare Parts Kits with PC or PE liquid ends are available at the same prices as VC or VE models. All specs are the same except
the Head/Fittings are GFRPP. All E-Class pumps include a manual air
vent valve with the exception of FC liquid ends. All E-Class pumps
include one foot valve, one injection valve, a ceramic weight and
20ft. of polyethylene tubing. Add “M” and $44.71 to the end of sizes
11, 16, and 21 pumps with 3
⁄8” discharge tubing and PC, PE, VC, VE
and VF liquid ends to include multi-function valve. For 230V pumps,
change the voltage code ‘1-’ to ‘2-’. Add “-H” and $140.00 to the
end of –VCA models for the HC276 version (for hydrogen peroxide).
Certified to
NSF/ANSI61
Pumps
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 67
67_67 3/30/14 10:43 AM Page 67
Pumps
EHE Series: Power and Versatility
LKN Series: High Capacity Mechanical Operation
Typical LKN Applications
Liquid End Application
n VC Weak Acids
n VH Caustics
n VS Viscosity & Slurries
n TC Strong Acids
All E- Class pumps with PVC heads have
been tested by NSF International and are
certified to NSF/ANSI Standard 61.
Certified to
NSF/ANSI61
 Max Max Pressure Head/ Seats/ OD Tubing Spare
 Item # Price Output GPH PSI Fittings Balls Seals Size (in) Parts Kit Kit Price
EHE31E1-PCX $1,124.64 5.5 150 GFRPP Ceramic FKM 1
⁄2 E31PC-PK $82.35
EHE31E1-PEX 1,124.64 5.5 150 GFRPP Ceramic EPDM 1
⁄2 E31PE-PK 82.35
EHE31E1-VCX 1,108.32 5.5 150 PVC Ceramic FKM 1
⁄2 E31VC-PK 82.35
EHE31E1-VEX 1,108.32 5.5 150 PVC Ceramic EPDM 1
⁄2 E31VE-PK 82.35
EHE31E1-VFX 1,108.32 5.5 150 PVC PTFE EPDM 1
⁄2 E31VF-PK 82.35
EHE36E1-PCX 1,177.47 8.5 105 GFRPP Ceramic FKM 1
⁄2 E36PC-PK 95.29
EHE36E1-PEX 1,177.47 8.5 105 GFRPP Ceramic EPDM 1
⁄2 E36PE-PK 95.29
EHE36E1-VCX 1,161.14 8.5 105 PVC Ceramic FKM 1
⁄2 E36VC-PK 95.29
EHE36E1-VEX 1,161.14 8.5 105 PVC Ceramic EPDM 1
⁄2 E36VE-PK 95.29
EHE36E1-VFX 1,161.14 8.5 105 PVC PTFE EPDM 1
⁄2 E36VF-PK 95.29
EHE46E1-PCX 1,208.20 12 60 GFRPP Ceramic FKM 1
⁄2 E46PC-PK 117.65
EHE46E1-PEX 1,208.20 12 60 GFRPP Ceramic EPDM 1
⁄2 E46PE-PK 117.65
EHE46E1-VCX 1,192.83 12 60 PVC Ceramic FKM 1
⁄2 E46VC-PK 117.65
EHE46E1-VEX 1,192.83 12 60 PVC Ceramic EPDM 1
⁄2 E46VE-PK 117.65
EHE46E1-VFX 1,192.83 12 60 PVC PTFE EPDM 1
⁄2 E46VF-PK 117.65
EHE56E1-PCX 1,287.92 20 30 GFRPP Ceramic FKM 1
⁄2 E56PC-PK 136.47
EHE56E1-PEX 1,287.92 20 30 GFRPP Ceramic EPDM 1
⁄2 E56PE-PK 136.47
EHE56E1-VCX 1,272.54 20 30 PVC Ceramic FKM 1
⁄2 E56VC-PK 136.47
EHE56E1-VEX 1,272.54 20 30 PVC Ceramic EPDM 1
⁄2 E56VE-PK 136.47
EHE56E1-VMX 1,387.80 20 30 M PVC Ceramic FKM 1
⁄2 E56VM-PK 136.47
If ‘X’ = Blank = Standard ½" tube connection. No accessory valve
V = Standard ½" tube connection w/ back pressure/anti-syphon valve, not available on FC models Add $104.71.
T = ¾" NPT (male) pipe thread connection (no manual priming valve). Subtract $168.24.
P = ¾" NPT (male) connection w/ back pressure/anti-syphon valve (no manual priming valve), not available on FC models. Add $74.12.
 Max Output Max Pressure Head/ Valve Connection Spare
 Item # Price GPH @ 60Hz PSI Fittings Balls Seat O-ring NPT (in) Parts Kit Kit Price
LKN32X-VC $1,379.02 9.5 150 PVC Ceramic FKM FKM ½ L3VC-PK $114.12
LKN32X-VH 1,394.00 9.5 150 PVC HC EPDM EPDM ½ L3VH-PK 132.94
LKN32X-VS 1,394.00 9.5 150 PVC HC/SS304 SS304 EPDM ½ L3VS-PK 132.94
LKN32X-TC 1,789.09 9.5 150 PVDF Ceramic FKM FKM ½ L3TC-PK 145.88
LKN45X-VC 1,540.99 15.9 150 PVC Ceramic PVC FKM ½ L4VC-PK 177.65
LKN45X-VH 1,555.97 15.9 150 PVC HC PVC EPDM ½ L4VH-PK 197.65
LKN45X-VS 1,555.97 15.9 150 PVC HC/SS304 SS304 EPDM ½ L4VS-PK 197.65
LKN45X-TC 1,990.37 15.9 150 PVDF Ceramic PVDF FKM ½ L4TC-PK 209.41
LKN47X-VC 1,540.99 31.8 120 PVC Ceramic PVC FKM ½ L4VC-PK 177.65
LKN47X-VH 1,555.97 31.8 120 PVC HC PVC EPDM ½ L4VH-PK 197.65
LKN47X-VS 1,555.97 31.8 120 PVC HC/SS304 SS304 EPDM 1 L4VS-PK 197.65
LKN47X-TC 1,990.37 31.8 120 PVDF Ceramic PVDF FKM ½ L4TC-PK 209.41
LKN55X-VC 1,677.68 53.4 75 PVC Ceramic PVC FKM 1 L5VC-PK 254.12
LKN55X-VH 1,692.66 53.4 75 PVC HC PVC EPDM 1 L5VH-PK 272.94
LKN55X-VS 1,692.66 53.4 75 PVC HC/SS304 SS304 EPDM 1 L5VS-PK 292.94
LKN55X-TC 2,506.22 53.4 75 PVDF Ceramic PVDF FKM 1 L5TC-PK 330.59
LKN57X-VC 1,677.68 114.3 45 PVC Ceramic PVC FKM 1 L5VC-PK 254.12
LKN57X-VH 1,692.66 114.3 45 PVC HC PVC EPDM 1 L5VH-PK 272.94
LKN57X-VS 1,692.66 114.3 45 PVC HC/SS304 SS304 EPDM 1 L5VS-PK 292.94
LKN57X-TC 2,506.22 114.3 45 PVDF Ceramic PVDF FKM 1 L5TC-PK 330.59
If ‘X’ is: A = 115/230V, 60Hz, 1 ph, 1/3 HP, 1725 RPM, TEFC Frame 42C motor installed
 B = 230/460V, 60Hz, 3 ph, 1/3 HP, 1725 RPM, TEFC Frame 42C motor installed
 D = 90VDC, 1 ph, 1/3 HP, 1750 RPM, TENV, Frame 42C Variable Speed Motor installed w/115V Control (add $1,505.88)
All EHE pumps include a
manual air vent (priming)
valve except FC and
options P and T.
All EHE pumps include one
foot valve, one injection
valve, 20' of polyethylene
tubing and one ceramic
weight with the exception
of options P and T.
Ideal for drinking water and waste
treatment applications.
Note: Walchem recommends the installation of a pressure relief valve and pulsation dampener in the discharge line of the LK Series Pumps.
Maximum viscosity at rated output is 1000 cps for VS and S6, 500 cps for VH and 300 cps for VC and TC.
Quick Spec
n Outputs from 5.5 to 20 gph
n 1800:1 Turndown Ratio
n Analog or Digital Input Capability
n Digital input with multiply or divide control
n Specifically designed to accurately
feed high viscosity chemicals.
n Available in two feed ranges from
2.3 GPH to 4 GPH and pressures up
to 73 PSI.
n Up to 240 strokes per minute results
in high resolution chemical feed,
reduced pulsation and improved
mixing
n Stainless Steel springs force Stainless
Steel balls against PCTFE valve
action with high viscosity polymers.
Quick Spec
n Output from 9.5 to 114 gph
n Dual cam drive
n Stroke Adjustment from 10-100%
n NEMA 42C Motor
n DC Drive Available
www.facebook.com/webbplastics
 Max Max Pressure OD Tubing Spare Kit
Item # Price Output GPH PSI Size (in) Parts Kit Price
EWN-C31P6URV $533.17 2.3 145 ½ x ½ ID Tube N31P6V-PK $161.50
EWN-C31P6URV-T 533.17 2.3 145 ½ NPT Male N31P6V-PK 161.50
EWN-C31PCURV 533.17 2.3 145 ½ x ½ ID Tube N31PCV-PK 161.50
EWN-C31PCURV-T 533.17 2.3 145 ½ NPT Male N31PCV-PK 161.50
EHE35E1-HV 1,131.31 4.0 252 ¾ NPT Male E35HV-PK 172.25
EHE35E1-HVV 1,269.24 4.0 252 ¾ NPT Male E35HV-PK 172.25
Pump does not include tubing, foot valve or injection valve
HVV pumps are supplied with a 30psi fixed back pressure/anti-syphon valve
EH-HV High Viscosity Metering Pump n Liquid end, drive and electronics are modular, enabling economical repair or replacement of
parts. The control module can easily be mounted in a remote location.
n PTFE laminate over EPDM is molded onto a solid core. A retainer NEW plate is engineered to minimize flow rate changes as pressure varies.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 68
68_68 3/31/14 7:45 AM Page 68
Pumps
Quick Spec
n Teflon® construction for tough
chemical applications
n Run Dry Capability - When fitted with a
carbon bearing the MX series will provide
1 hour of guaranteed run dry capability.
n Patented Split Volute Casing -
Creates higher efficiencies and requires
less power
n Non-Metallic Baseplate - Withstands
chemical attack
MX-F Series Pump - Corrosive Resistant Teflon®
 Suction x Discharge Max Discharge Max Flow Specific Motor Output
 Item # NPT Pressure FT GPM Gravity @60 Hz
MX-F250 1" x 1" 48 43 1.2 0.5 HP
MX-F251 1" x 1" 69 40 1.0 1.0 HP
MX-F400_ _ _V 1.5" x 1.5" 43 65 1.2 0.75 HP
MX-F400_ _ _X 1.5" x 1.5" 34 65 1.2 0.75 HP
MX-F401_ _ _V 1.5" x 1.5" 68 86 1.2 1.5 HP
MX-F401_ _ _X 1.5" x 1.5" 50 75 1.2 1.5 HP
MX-F402_ _ _X 2" x 1.5" 70 120 1.2 2 HP
MX-F403_ _ _X 2" x 1.5" 93 130 1.2 3 HP
Typical Applications
n Sodium Hypochlorite (Bleach) n Caustic
n Sulphuric Acid n Hydrochloric Acid
 Material Code Single Phase Motor Material Code Three Phase Motor
 Item # CF RF CF RF
MX-F250_ _ _XM_ $1,560.93 $1,573.81 $1,542.20 $1,555.08
MX-F251_ _ _XM_ 1,733.06 1,747.12 1,714.32 1,728.38
MX-F400_ _ _XM_ 1,317.36 1,341.95 1,298.63 1,324.39
MX-F400_ _ _VM_ 1,347.80 1,372.39 1,320.88 1,346.64
MX-F401_ _ _XM_ 1,865.39 1,892.32 1,846.65 1,872.41
MX-F401_ _ _VM_ 1,922.76 1,949.70 1,863.04 1,888.80
MX-F402_ _ _XM_ 2,994.21 3,083.22 2,790.47 2,879.46
MX-F403_ _ _XM_ —.... —.... 3,087.89 3,165.18
ORDERING MXPump
size
F250 F251 F400 F401 F402 F403
Materials of Bearings/Spindle/O-ring
CFV High Density Carbon/High
Purity Alumina Ceramic/FKM
RFV PTFE/Almina Ceramic/FKM
Impeller Mark
X 60 Hz
V 60 Hz higher output
House Motor
M1 TEFC/Single phase
M3 TEFC/Three phase
Quick Spec
n Run Dry Capability - When fitted with a
carbon bearing the MX series will provide
1 hour of guaranteed run dry capability.
n NPT Male Connections - Withstands
over-torquing of fittings without breakage
n Patented Split Volute Casing -
Creates higher efficiencies and requires
less power
n Non-Metallic Baseplate - Withstands
chemical attack
MX Series Pump - Low Cost Polypropylene
 Suction x Discharge Max Discharge Max Flow Specific Motor Output
 Item # NPT Pressure FT GPM Gravity @60 Hz
MX-250 1" x 1" 53 40 1.0 0.5 HP
MX-251 1" x 1" 75 50 1.0 1.0 HP
MX-400_ _6 1.5" x 1.5" 38 70 1.2 0.75 HP
MX-400_ _7 1.5" x 1.5" 43 70 1.2 0.75 HP
MX-401_ _6 1.5" x 1.5" 59 80 1.2 1.5 HP
MX-401_ _7 1.5" x 1.5" 68 80 1.2 1.5 HP
MX-402 2" x 1.5" 73 107 1.2 2 HP
MX-402H 2" x 1.5" 99 45 1.0 2 HP
MX-403 2" x 1.5" 101 130 1.2 3 HP
MX-403H 2" x 1.5" 126 70 1.0 3 HP
Typical Applications
n Plating n Salt Water
n Chemical Transfer n Water & Wastewater
n Fume Scrubbers
 Material Code Single Phase Motor Material Code Three Phase Motor
 Item # CV RV CV RV
MX-250_ _6M_ $859.36 $887.75 $838.71 $867.10
MX-251_ _6M_ 1,167.75 1,252.91 1,145.82 1,230.98
MX-400_ _6M_ 830.98 859.36 811.62 838.71
MX-400_ _7M_ 864.52 892.91 836.14 863.23
MX-401_ _6M_ 1,125.16 1,210.33 1,103.23 1,188.39
MX-401_ _7M_ 1,188.39 1,273.55 1,121.30 1,206.46
MX-402_ _6M_ 2,332.92 2,369.05 2,108.40 2,144.53
MX-402H_ _ 6M_ 2,332.92 2,369.05 2,108.40 2,144.53
MX-403_ _6M_ —... —... 2,290.33 2,331.62
MX-403H_ _ 6M_ —... —... 2,290.33 2,331.62
ORDERING MXPump
size
250 251 400 401 402 403
Materials of Bearings/Spindle/O-ring
CV Carbon/Alumina Ceramic/FKM
RV PTFE/Almina Ceramic/FKM
Impeller Mark
6 60 Hz
7 60 Hz higher output
House Motor
M1 TEFC/Single phase
M3 TEFC/Three phase
Iwaki America has over 50 years of magnetic drive pump experience handling tough chemical
applications. The MX series is our latest release, featuring state of the art materials, technology
and workmanship.
Sealless with DRY-RUN
Capability
Sealless with DRY-RUN
Capability
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 69
69_69 3/30/14 10:46 AM Page 69
FLUID SYSTEM
DESIGN PARAMETERS
n Specific Gravity: Up to 1:1
n Viscosity: Up to 100 SSU (20 CPS)
n Ambient Air Temperatures: Up to 77° F (25° C)
 Pump Model Gallons per minute Shut Off Intake Discharge
 Item # (115V., 60Hz.) @ 1 Ft. @ 6 Ft. (Ft.) PSI Size (in.) Size (in.) Price
 LG580503 2-MD-SC 8.50 6.83 14.6 6.3 1
⁄2" 1
⁄2" $185.12
 LG581503 3-MD-SC 12.50 11.08 21.9 9.5 3
⁄4" 1
⁄2" 212.42
 LG582503 4-MD-SC 14.16 12.75 24.3 10.5 1" 1
⁄2" 255.35
 LG583503 5-MD-SC 17.50 15.33 27.5 11.9 1" 1
⁄2" 365.77
 @ 1 Ft. @ 15 Ft.@ 30 Ft.
 LG585504 TE-5.5-MD-SC 33.33 28.00 19.16 42.0 18.0 1" 3
⁄4" 573.86
 LG586504 TE-6-MD-SC 39.66 34.16 28.33 51.0 22.0 1" 3
⁄4" 596.10
Magnet Driven Chemical Pumps
Quick Spec
n Non-submersible pumps with leakproof seal-less
magnet drive
n 99.5% pure alumina ceramic shaft and thrust washers for
long, trouble-free service
n Glass-filled polypropylene pumping head and impeller with
encapsulated magnet for
excellent chemical resistance
n Nitrile O-ring
As Low As
$
18512
For semi-corrosive chemicals and solutions MD-SC Series Magnet Driven Chemical Pump
For semi-corrosive acids, alkalines and salt solutions at fluid
temperatures up to 150°F.
FLUID SYSTEM
DESIGN PARAMETERS
n Specific Gravity: Up to 1:1
n Viscosity: Up to 100 SSU (20 CPS)
n Ambient Air Temperatures: Up to 77° F (25° C)
Resistant to a broad range of highly cor rosive chemistries and
most solvents, at fluid tempera tures up to 200° F. While not
recommended, pumps in the MD-HC Series can run dry for up to
eight hours with no apparent damage.
 Pump Model Gallons per minute Shut Off Intake Discharge
 Item # (115V., 60Hz.) @ 1 Ft. @ 6 Ft. (Ft.) PSI Size (in.) Size (in.) Price
 LG580603 2-MD-HC 8.5 6.83 14.6 6.3 1
⁄2" 1
⁄2" $227.97
 LG578603 3-MD-MT-HC 8.33 7.08 16.2 7.0 1
⁄2" 1
⁄2" 198.79
 LG581603 3-MD-HC 12.50 11.08 21.9 9.5 1
⁄2" 1
⁄2" 276.46
 LG581604 TE-3-MD-HC 9.83 8.16 16.3 7.1 1
⁄2" 1
⁄2" 285.97
 LG582603 4-MD-HC 14.16 12.75 24.3 10.5 1
⁄2" 1
⁄2" 266.02
 LG582604 TE-4MD-HC 14.16 12.75 24.3 10.5 1" 1
⁄2" 345.58
 @ 1 Ft. @ 15 Ft. @ 30 Ft.
 LG583603 5-MD-HC 17.50 10.91 – 27.5 11.9 1" 1
⁄2" 406.72
 LG584604 TE-5-MD-HC 20.00 14.75 – 29.3 12.7 1" 1
⁄2" 566.95
 LG585604 TE-5.5-MD-HC 33.33 28.00 19.16 42.0 18.0 1" 3
⁄4" 596.11
 LG586604 TE-6-MD-HC 39.66 34.16 28.33 51.0 22.0 1" 3
⁄4" 618.35
 LG587010 TE-7-MD-HC 53.00 44.00 37.50 58.9 25.5 11
⁄2" 1" 975.10
NOTE: Consult Webb for applications with higher ambient temperatures, specific gravities and viscosities.
Quick Spec
n 99.5% pure alumina ceramic shaft and thrust washers for
long, trouble-free service in use with harsh solu tions
n Viton® O-ring.
n Self-lubricating carbon impeller bushing which is
impervious to fluids and long-lived in abrasive solutions.
n Glass-filled Ryton® encapsulated driven magnet for superior
chemical wear resistance
n Non-submersible pumps with
leakproof seal-less magnet drive
For highly corrosive chemicals and solutions
*RUN-DRY
Capability
Capability
*Although no pump
should be operated
dry, these pumps can
be run dry for up to
eight hours without
apparent damage.
MD-HC Series Magnet Driven Chemical Pump
LITTLE GIANT MAGNET DRIVEN CHEMICAL PUMPS FEATURE:
Trouble-free handling of acids, alkalis, solvents
n Leak-proof, seal-less magnetic drive
n Chemicals contact only chemically resistant materials
n Balanced drive magnet extends bearing life
n Spindle shaft supported at both ends to prevent
impeller damage during start-up and stop
n Motors designed to run cooler under maximum load
and continuous operation
n Motors have built-in overload protection
n Most pump models UL Listed or Component Recognized
and CSA Component Certified
For mildly corrosive chemicals and solutions
 Pump Model Gallons per minute Shut Off Intake Size Discharge Size
 Item # (115V., 60Hz.) at 1 foot at 6 feet (feet) PSI (inches) (inches) Price
 LG588001 1-AA-MD 2.83 – 5.5 2.5 1
⁄2" O.D. 1
⁄2" O.D. $87.06
 LG589002 1-MD 3.00 1.50 10.6 4.6 1
⁄2" O.D. 1
⁄2" O.D. 133.73
 LG580002 2-MD 8.50 6.83 14.6 6.3 1
⁄2" FPT 1
⁄2" MPT 162.73
 LG581002 3-MD 9.83 8.16 16.3 7.1 1
⁄2" FPT 1
⁄2" MPT 198.25
 LG582002 4-MD 11.50 10.00 23.7 10.2 1
⁄2" FPT 1
⁄2" MPT 236.84
 LG583002 5-MD 15.08 13.30 34.6 15.0 1
⁄2" FPT 1
⁄2" MPT 351.22
FLUID SYSTEM
DESIGN PARAMETERS
n Specific Gravity: Up to 1:1
n Viscosity: Up to 100 SSU (20 CPS)
n Ambient Air Temperatures: Up to 77° F. (25° C.)
For mildly corrosive fluids such as low concentrations of acids
and alkalis in the 5-9 pH range, and temperatures up to 150°F.
Quick Spec MD Series Magnet Driven Chemical Pump
n Non-submersible pumps with leakproof seal-less
magnet drive
n High quality, permanent, uncoated
ceramic (barium ferrite) driven magnet
n Except where noted, all models have titanium shaft and
thrust washers for excellent wear and corrosion resistance
n Glass-filled polypropylene pumping head and impeller
n Nitrile O-ring
From Only
$
8706
Pumps
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 70
70_70 3/30/14 10:48 AM Page 70
DB Series Flooded Suction Magnetic Drive Pumps
3450 RPM
Model KC6, KC8, KC10 FLOW (GPM) Feet of Head
KC 10
(1 hp)
KC 8
(3/4 hp)
KC 6
(1/2 hp)
The KC Series are
sealless, magnetic
drive centrifugal
pumps designed to
be lighter weight
yet stronger than
conventional mag
drive centrifugals.
KC Series Magnetic Sealless Centrifugal Pumps
 3450 RPM Max. Inlet
 Max. Flow Max. Head Pressure
 Model # Item # Material Suction Discharge (GPM) (Ft.) (PSI) Motor Price
 Models KC6, KC8, KC10
 KC6 KC6PCVN315C02 polypro 1 3
⁄4 40 45 60 1
⁄2 hp, single phase, 60 Hz $1,059.72
 KC6 KC6PCVN315C03 polypro 1 3
⁄4 40 45 60 1
⁄2 hp, three phase, 50-60 Hz 1,032.83
 KC6 KC6VCVN315C02 PVDF 1 3
⁄4 40 45 60 1
⁄2 hp, single phase, 60 Hz 1,384.86
 KC6 KC6VCVN315C03 PVDF 1 3
⁄4 40 45 60 1
⁄2 hp, three phase, 50-60 Hz 1,363.88
 KC8 KC8PCVN355C02 polypro 11
⁄2 1 60 55 60 3
⁄4 hp, single phase, 60 Hz 1,285.06
 KC8 KC8PCVN355C03 polypro 11
⁄2 1 60 55 60 3
⁄4 hp, three phase, 50-60 Hz 1,285.07
 KC8 KC8VCVN355C02 PVDF 11
⁄2 1 60 55 60 3
⁄4 hp, single phase, 60 Hz 1,510.18
 KC8 KC8VCVN355C03 PVDF 11
⁄2 1 60 55 60 3
⁄4 hp, three phase, 50-60 Hz 1,488.16
 KC10 KC10PCVN385C01 polypro 11
⁄2 1 70 65 60 1 hp, single phase, 60 Hz 1,432.06
 KC10 KC10PCVN385C02 polypro 11
⁄2 1 70 65 60 1 hp, three phase, 50-60 Hz 1,410.15
 KC10 KC10VCVN385C01 PVDF 11
⁄2 1 70 65 60 1 hp,single phase, 60 Hz 1,668.23
 KC10 KC10VCVN385C02 PVDF 11
⁄2 1 70 65 60 1 hp, three phase, 50-60 Hz 1,644.45
NOTE: Call regarding KC11 and KC22 models
Performance Curves
n Flows to 255 gpm (58 m3/hr)
n Heads to 135 ft (42 m)
n 30+ minutes run dry capability
n Viscosities to 50 cps
n 1.4 to 1.8 specific gravity
n Temperatures: PP-180°F, PVDF-220°F
PERFORMANCE
Quick Spec
n Excellent chemical resistance
n Standard motor mounting
n Rugged cantilever design
n Back pull-out design
n No Leakage
n Polypropylene and
n PVDF Construction
n Short carbon bushing
As Low As
$
1,05972
Pumps
n Highest efficiency - Up to 70% efficiency.
n Best run dry ability.
n Best warranty - offering five years.
n Standard NEMA or IEC motors - DB
Series mounts to all standard motors.
n Best corrosion resistance - Durably
molded from corrosion resistant
polypropylene or PVDF.
n ATEX certified models available.
FTI's DB Series Magnetic Drive Pumps are the product of advanced engineering CFD design software and
superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag
drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.
 Model Max Flow Max Head PSI
DB3 15.1 gpm (2.8m3/hr) 20.4 feet 60
DB4 18.0 gpm (3.4m3/hr) 29.2 feet 60
DB5 19.4 gpm (3.6m3/hr) 35.2 feet 60
These Models Also Available
 DB9 DB6 DB6H DB7 DB10 DB15 DB22
Max Flow 46 gpm 40 gpm 42 gpm 69 gpm 96 gpm 135 gpm 220 gpm
Max Head 67.0 feet 33.0 feet 54.0 feet 34.0 feet 51.0 feet 98.0 feet 201.4 feet
Item # Material Motor / Description Price
DP3PM612 Polypro 1
⁄8Hp, 115V, 1Ph, 60Hz, TEFC, CSA, CE $368.84
DP4PM613 Polypro 1
⁄4Hp, 115V, 1Ph, 60Hz, TEFC, CSA, CE 392.78
DP5PM613 Polypro 1
⁄4Hp, 115V, 1Ph, 60Hz, TEFC, CSA, CE 416.73
DB3VM612 PVDF 1
⁄8Hp, 115V, 1Ph, 60Hz, TEFC, CSA, CE 492.18
DP4VM613 PVDF 1
⁄4Hp, 115V, 1Ph, 60Hz, TEFC, CSA, CE 516.12
DP5VM613 PVDF 1
⁄4Hp, 115V, 1Ph, 60Hz, TEFC, CSA, CE 547.26
Options
R Bushing – Alumina-Ceramic 99.39
M614 for DB3 1
⁄8Hp, 230V, 1Ph, 50/60Hz, TEFC, CE –
M615 for DB4/DB5 1
⁄4Hp, 230V, 1Ph, 50/60Hz, TEFC, CE –
FEATURES
For other options, CALL one
of our Webb specialists.
Up to
7.5hp
Up to
7.5hp
KC4 PVDF
KC10
KC8 PP
KC22 PP
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 71
71_71 3/30/14 10:50 AM Page 71
Pumps
BECKSON Trans fer Pumps
n Solvent welded con struc tion
n Will withstand tem per a ture to 120°F
n Self-Priming
n Will not syphon
n 28 ounces per stroke
n Safe. Uses no pressure
n Operates by lifting action only
n Six feet of hose
n Supplied with 2" IPS bung adapter
Designed to fit 2" NPS bung openings. The
spout can be rotated to prevent dripping. 2,
4, 6 or 16 oz. per stroke with adjustable
stroke tubes. Fits 5, 15, 30, and 55 gallon
drums.
Polypropylene
Drum Pump
Petroleum Trans fer Pumps
BECKSON SERIES 336
MARVELTEK
 Item # Description Price
 336PF6S Transfer pump Buna-N valve & seal $79.87
 Item # Description Hose Price
436PF3-S Std 2" IPS Bung - Fine Thread 3 feet $72.92
436PF6-S Std 2" IPS Bung - Fine Thread 6 feet 89.65
 Item # Description Hose Price
236PF3-S Std 2" IPS Bung 3 feet $79.69
236PF6-S Std 2" IPS Bung 6 feet 99.79
SYPH-1B – Low cost polyethylene squeeze bulb
pump fits 1, 21
⁄2 and 5 gallon containers. Perfect for
small carboys and cans. Siphon flow rate is approximately
2 gpm.
SYPH-4A-HD — This all polyethylene, heavy
duty siphon pump is the choice for heavy use applications.
Siphons 7 gallons per minute. Provides
longer life than 4A when pumping aggressive chemicals.
Fits containers with 2" IPS female threads. For chemical
compatability,
please call
Webb Technical
Support.
Syphon Pumps
 Item # Model Price
 226055 Pump 10044 330 (8oz.) $14.98
 226056 Pump 00090 330 (16oz.) 22.37
 Item # Model Price
 22626 Syphon SYPH-1B $9.25
 226268 Syphon SYPH4A-HD 13.29
 Item # Model Price
 41157 RP-96 Rotary Pump $102.23
 226268 RP-90 Rotary Pump 86.85
High Volume Water Pump
Acid Transfer Pump
The Beckson Viton 236 Series of hand pumps eliminate the
dangerous practice of lifting or tilting drums and carboys. The
pumps are designed to safely transfer most acids and easily fit
most drums or containers. The pump barrel and shaft are PVC,
while the valves and patented seal are Viton.
The pumps are 38" long, 11
⁄2" in diameter and come with either
a 11
⁄4" x 36" or a 11
⁄4" x 72" polyethylene discharge hose.
The pump transfers at a rate of 28 oz. per stroke.
See adapter guide for proper adapter below.
Alkali Transfer Pump
The Hypalon 436 Series is designed to
safely transfer detergents, waxes, alkalis
and certain acids. They incorporate
the same design features as the
236 series, with valves and seals
of Hypalon. The pumps are 38"
long, 11
⁄2" diameter and deliver
28 oz. per stroke.
See adapter guide for proper adapter below.
ADPT-A01 – For ACT Buttress Thread (23
⁄4") $9.50
ADPT-B01 – 25
⁄8" Poly Drum Buttress 6.00
ADPT-B02 – For CCA or Rieke Buttress Thread (23
⁄4") Use with ADPT-S01 14.00
ADPT-P01 – For 83B Closure 32.00
ADPT-S01 – 2" IPS Standard 6.20
2" IPS adapter
ADPT-S01
screws into
CCA or Rieke
Buttress Thread
adapter
ADPT-B02
2" IPS adapter
ADPT-S01
screws into
ACT Buttress
Thread adapter
ADPT-A01
n Cast Iron and graphite rotary vane pump is designed to rapidly
dispense oils, soluble, corrosive and volatile chemicals, edible
liquids (juice, milk, wine, oil, water), gasoline and kerosene.
n Most advanced non-oxidation and rust-free materials.
n Turning crank handle develops 10 gpm or will
siphon to lower level after several turns.
n Clockwise rotary operation.
n Applicable for all liquids.
RP-90 Cast Iron Rotary Pump
RP-96 PPS Rotary Pump
n Precisely engineered and well constructed PPS
pump housing, all STAINLESS STEEL tubes, ALU.
Alloy handle and TEFLON made components.
n Well suited for product other than volatile
liquid (gasoline, benzene...), such as
chemical products, foods, lubricant...
Pump Adapter Guide Pump adapters are used to secure the pump to a variety of
containers. Please use the guide below when choosing an adapter for your application.
For 11
⁄2" Pumps: 236 Series - 336 Series - 436 Series.
236 and
436 Series
Transfer
Pumps
ADPT-A01 ADPT-B01 ADPT-B02 ADPT-P01 ADPT-S01
16 gallons in one minute!
Pumps a quantity of water easily. Flexible
tubing in intake end extends to bottom of
liquid to be removed. Flexible tubing in outlet
end allows for directing of flow. 7 ft. on
inlet end, 3 ft. on outlet end.
n Diameter: 3"
n Length: 24"
n Stroke: 14"
n Hose ID: 2"
Item # Description Price
437260 3" 915 Pump $157.99
2400 GPH
Snappy John® Automatic
Sump Pump Internally lubricated; zinc
motor housing. Thermally
protected. Screened inlet.
Able to pump water containing
solids up to 3
⁄8" in diameter
such as twigs, debris. etc.
Built-in snap-action float
switch for automatic oper -
ation: "On" level is 7"-10" of
water; "Off" level is 5"-2".
11
⁄4" FNPT outlet with garden
hose adapter.
Item # Model Cord Length Price
LG505700 5.5-ASP 10' $184.46
LG505701 5.5-ASP 25' 220.28
UL
Model 5-ASP-LL
 GPH Cord Shut Motor
Item # Model @ 1' Length Off psi HP amp. Price
LG505000 5-MSP 1200 10' 26.3 11.4 1
⁄6 5 $108.03
LG505300 5-ASP 1200 10' 26.3 11.4 1
⁄6 5 150.40
LG505350 5-ASP-LL 1200 18' 26.3 11.4 1
⁄6 5 243.39
UL
Model 5-MSP
n Compact & Lightweight
n 1" discharge (garden hose)
n 10 FT. power cord
n Max. head 26.3
n (RS-5) remote switch for
automatic operation available
1200 GPH
Water Wizard® Utility Pumps
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 72
72_72 3/30/14 10:52 AM Page 72
Pumps
PF Series Drum Pumps – Non- or mildly corrosive fluids, max temp 160°F 2- Choose your Sealless Pump TUBE:
EASY TO ORDER... 1- Choose your Motor:
The PF series drum pump is unmatched in performance when compared to any competitive
drum pump and is available at the lowest price worldwide. The PF Series is a revolution
in drum pump design.
ELECTRIC – 50/60 HZ
n 40 gpm (150 L/min)
n 80 feet TDH (24 m)
n 500 cps max.
AIR
n 30 gpm (112 L/min)
n 60 feet TDH (18 m)
n 330 cps max.
ELECTRIC – 50/60 HZ AIR
Light to Medium Viscosity Pump Tubes
NOTE: Explosionproof motor performance is reduced to 7 gpm and 18 feet TDH maximum. This reduction
helps to reduce static electricity.
PFP – Polypropylene Tubes
Model # Item # Shaft Length Price
 PFP-27 DPFP005 27" $388.75
 PFP-40 DPFP006 40" 402.31
 PFP-48 DPFP007 48" 435.03
 PFP-60 DPFP032 60" 506.15
 PFP-72 DPFP034 72" 546.30
For corrosive liquids – acids, caustics, salts –
500 cps, maximum temperature 160°F.
PFV – PVDF Tubes
 Model # Item # Shaft Length Price
 PFV-27 DPFV005 27" $707.33
 PFV-40 DPFV012 40" 857.99
 PFV-48 DPFV007 48" 958.68
 PFV-60 DPFV018 60" 1,035.16
 PFV-72 DPFV017 72" 1,232.13
For VERY CORROSIVE liquids – concentrated
sulphuric, hydrofluoric and nitric acids – 500 cps,
maximum temperature 120°F.
Model Description Item # Price
M3 1
⁄2 HP, 10,000 rpm, 110/50-60/1, Splashproof, LR# 69028 , 7 amps A100005 $418.70
M3T 1
⁄2 HP, 10,000 rpm, 110/50-60/1, TEFC, LR# 69028 , 8 amps A101128 822.49
M3X 1
⁄10 HP, 5,00 rpm, 110/50-60/1, EXP, LR# 69028 , 1.7 amps, A101129 1,214.48
 Class I, Div. I, Group D
M5 1
⁄2 HP, 10,000 rpm, 220/50-60/1, Splashproof, IP44 A100006 473.75
M5T 1
⁄2 HP, 10,000 rpm, 220/50-60/1, TEFC, , IP54, 480 watts A101132 831.91
M5X 1
⁄10 HP, 10,000 rpm, 220/50-60/1, EXP , EEx d IIA T4, IP54, TUV A101133 1,214.22
M6 1
⁄2 HP, 300 – 6,000 rpm, Air, 80 PSI at 25 cfm A100007 343.03
M6X 3/4 HP, 300 – 6,000 rpm, EXP Air, 100 psi at 25 cfm A101125 487.77
†M10X 1
⁄2 HP, 10,000 rpm, 220/50-60/1, EXP, , EEx d IIA T4, IP54 A101495 1,228.43
* For pumping flammables, use only air or explosionproof electric motors on stainless steel tubes with static
protection kit # A100835. † Recommended for pumping non-flammables in an explosionproof environment.
D
D
D
PFS – Stainless Steel Tubes
 Model # Item # Shaft Length Price
 PFS-27 DPFS005 27" $595.26
 PFS-40 DPFS006 40" 674.73
 PFS-48 DPFS007 48" 667.60
 PFS-60 DPFS033 60" 1,000.63
 PFS-72 DPFS034 72" 1,192.37
For flammables*, solvents, mild corrosives, and
organic acids, 500 cps, maximum temperature 220°F.
UP TO 500 CPS
Molded
Motor
Housing
Circuit
Breaker
Manual
Reset
Variable
Orifice Barb
Fitting
(PFP, PFV Only)
Discharge
Nut
1-1
⁄4" N.P.T.
(PFP, PFV Only)
Shaft
Teflon®
Bearing
Double
Suction
Impeller
Teflon®
Bearing
Outer
Tube
Inner
Tube
Molded
Hand
Grip
On/Off
Switch
Bearing
Support
NEW
SPLASHPROOF
MOTOR
 Item # Model Price
 DEFP001 16" x 1.25 dia PP, 3
⁄4" discharge, FKM, 316SS shaft $164.00
 DEFP002 27" x 1.25 dia PP, 3
⁄4" discharge, FKM, 316SS shaft 182.00
 DEFP003 40" x 1.25 dia PP, 3
⁄4" discharge, FKM, 316SS shaft 225.00
 DEFP004 48" x 1.25 dia PP, 3
⁄4" discharge, FKM, 316SS shaft 270.00
 DEFP028 54" x 1.25 dia PP, 3
⁄4" discharge, FKM, 316SS shaft 316.00
 Output
Item # Model Hp Watt RPM Volt Hz PH FLA Enclosure Certification Price
1073241 S1 1
⁄3 110 14,000 115 50/60 1 2 Splashproof CSA $246.06
1073242 S2 1
⁄3 110 10,000 220-240 50/60 1 1.1 A11 CE 273.58
107324-3 S3 1
⁄3 400 11,000 220-240 50/60 1 1.1 A11 CE 337.21
107325 S4 1
⁄2 110 11,000 A12 393.78
EF Series Drum Pumps Tubes – Mild acids, chemicals & corrosives, max temperture 150°F
Motors – Electric Splashproof, IP44
n Sealless n 1.8 sg
n Unique double suction impeller
n Variable flow orifice (PFP & PFV only)
n Pump interchangeable with motors
n Easy disassembly for cleaning
n 30-minute run dry capability
FEATURES
n Sealless
n Lightweight n Economical
n Polypropylene, pure PP/PVDF or 316SS tubes
n Dual speed adjustable motors
n Interchangeable motors and tubes
n Built-in hose and cord clips - EFP and EFV only
PERFORMANCE
n 1.2 SG (1.6 SG with S4 air motor*)
n 300 cP maximum
Note: When pumping flammables or combustibles, use an air motor on a stainless steel tube with a static protection kit.
**An air motor is a non-electrical device, which means the possibility of explosion from igniting flammables or
combustibles is reduced. Air motor performance will depend upon user’s compressor and system set up.
Medium performance, light viscosity sealless
drum/barrel pumps for container-to-container
transfer of acids, corrosives and chemicals.
*Based on 1 cP. For higher viscosities, contact the factory.
EFP EFV EFS
From Only
$
16400
3- Your Complete Unit
Size Recommended Delivery Rate: Delivery Head: Materials:
LJ 1
⁄4" For the Laboratory sector, small plants requirements Up to 4.3 GPM Up to 100 PSI PP, PVDF, Nylon
with small delivery volume at relatively high pressure.
LJ 3
⁄8" Ideal for inks, paints, adhesives, waste oil, Up to 9 GPM Up to 120 PSI PP, PVDF, Nylon
coolant recycling, and other specialized applications.
LJ 1
⁄2" 200-I-drum pumping, ink recirculation and feed, Up to 17 GPM Up to 120 PSI PP, PVDF, Nylon
chemicals, solvents, acids, soap dispensing. Aluminum, Stainless
LJ 1" Drum and small tank transfer, picking solutions, Up to 40 GPM Up to 120 PSI PP, PVDF, Nylon
chemical feed. Aluminum, Stainless
LJ 11
⁄2" Filter press, tank cleaning systems, pigments Up to 95 GPM Up to 100 PSI PP, PVDF,
and resins. Aluminum, Stainless
LJ 2" Paint, latex, ceramic slip, slurries, polymers, Up to 150 GPM Up to 100 PSI PP, PVDF,
tank car fill and empty, foods. Aluminum, Stainless
LJ 3" Paint, latex, ceramic slip, slurries, polymers, Up to 255 GPM Up to 120 PSI Aluminum
tank car fill and empty.
 Item # Materials Price Repair Kit Item # Price
LJPG-B1/2 ½" Bolted 0-17gpm PP, Geolast®/Nitrile $624.63 PB-05 Kit $126.93
LJPS-B1/2 ½" Bolted 0-17gpm PP, Santoprene®/EPDM 522.31 PE-05 Kit 132.69
LJKT-B1/2 ½" Bolted 0-17gpm PP, PVDF/PTFE 1,184.62 KT-05 Kit 467.31
LJPG-B1 1" Bolted 0-17gpm PP, Geolast®/Nitrile 963.85 PB-10 Kit 236.53
LJPS-B1 1" Bolted 0-17gpm PP, Santoprene®/EPDM 963.85 PE-10 Kit 265.39
LJKT-B1 1" Bolted 0-17gpm PP, PVDF/PTFE 2,040.77 KT-10 Kit 690.08
LJPG-B11/2 1½" Bolted 0-130gpm PP, Geolast® 2,374.62 PB-15/20 Kit 496.16
LJPS-B11/2 1½" Bolted 0-130gpm PP, Santoprene® 2,374.62 PE-15/20 Kit 375.01
LJKT-B11/2 1½" Bolted 0-130gpm PP, PVDF/PTFE 2,040.77 KT-15/20 Kit 1,523.08
n Absolutely lube free valve
n Corrosion free materials of construction
n Non-stalling function at low pressures
n Conductive materials available
Lutz-JESCO AIRTRAN™ pump housings are available in Polypropylene, PVDF, Nylon, Conductive Nylon, Aluminum
and Stainless Steel, the membranes, ball valves and o-rings are available in Teflonh, FKM (Vitonh), Geolasth
(Buna-N) and Santopreneh. Pump capacities go up to 255 GPM with maximum air pressures up to 120 PSI.
n No close fitted or rotating parts
n Can safely run dry
n Variable pressure and speed
n No generated heat due to the
absence of an electric motor
n Minimal product shear
n Self-priming dry or wet
n No dynamic seals
n Portable
n Continuous running
n Can handle abrasive solids
n 17 gpm (64.4 lpm)
n 15 gpm (56.8 lpm)
n 20 feet TDH (6.1 m)
n 17 feet TDH (5.2 m)
Air Activated Operating Double Diaphragm Pump
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 73
73_73 3/30/14 10:54 AM Page 73
Gauges
Chemical Gauge Guards
SERIES GGS STEEL REINFORCED
An economical way to protect instruments from corrosion and clogging while maintaining
high accuracy resulting in cost savings and assurance of system de pend abil i ty within an
operating range of full vacuum to 200 psi.
“Fill Liquid" is a temperature stabilized mineral oil which will not
cause inaccuracies in gauge reading when subjected to tem per a ture
variations, as may occur with other liquids.
Center Back Mounted Gauge Add "C"
and $12.00 (ex: GGT100-PV-C - )
Fill Port Add "FP"
and $26.00 (ex: GGT100-PV-FP - )
Snubber Insert Add Z-Snubber
and $13.00 (ex: GGT100-PV-Z-Snubber - )
V=Viton, for use in vacuum or to 200 psi
T=Teflon, for use from 30 psi to 200 psi
Series “GGME” Miniature Diaphragm Seal 1
⁄4" x 1
⁄2" NPT
Gauge PVC Polypro PVDF CPVC
Range Item # Price Item # Price Item # Price Item # Price
For Pressure
0-15 GGVS015-PV $113.24 GGVS015-PP $133.93 GGVS015-PF $170.83 GGVS015-CP $141.66
0-30 GGTS030-PV 113.24 GGTS030-PP 133.93 GGTS030-PF 170.83 GGVS030-CP 141.66
0-60 GGTS060-PV 113.24 GGTS060-PP 133.93 GGTS060-PF 170.83 GGVS060-CP 141.66
0-100 GGTS100-PV 113.24 GGTS100-PP 133.93 GGTS100-PF 170.83 GGVS100-CP 141.66
0-160 GGTS160-PV 113.24 GGTS160-PP 133.93 GGTS160-PF 170.83 GGVS160-CP 141.66
0-200 GGTS200-PV 113.24 GGTS200-PP 133.93 GGTS200-PF 170.83 GGVS200-CP 141.66
For Vacuum 0-30" Hg
 GGVS000-PV 131.15 GGVS000-PP 154.17 GGVS000-PF 187.50 GGVS000-CP 150.00
Shield Add “S” to model no., (ex.: GGTS200-PP-S)
 61.85 75.69 119.08 73.85
Series “GGS” Gauge Guards Without Gauge (1
⁄4" x 1
⁄2")
 PVC Polypro PVDF CPVC
 Item # Price Item # Price Item # Price Item # Price
 GGTS1-PV $68.33 GGTS1-PP $84.62 GGTS1-PF $123.08 GGTS1-CP $92.31
 GGVS1-PV 68.33 GGVS1-PP 84.62 GGVS1-PF 123.08 GGVS1-CP 92.31
Quick Spec
n CASE: Phenolic solid front – 41
⁄2"
n WETTED PARTS: Bronze and 316L stainless steel
n WINDOW: Glass
n POINTER: Micrometer adjustable
n ACCURACY: ASME B40.1 Grade 2A, +/- 0.5% full scale
n CONNECTION: 1
⁄4" NPT lower (1
⁄2" NPT available)
Bronze Tube, Brass Socket
 Dry Glycerin Fill "Plus"
Pressure Item # Price Item # Price Item # Price
30" HG VAC 45 1279AS 02L VAC $98.33 45 1279ASL 02L VAC $134.17 45 1279AS 02L XLL-VAC $130.01
15psi 45 1279AS 02L 15# 98.33 45 1279ASL 02L15# 134.17 45 1279AS 02L XLL-15# 130.01
30psi 45 1279AS 02L 30# 98.33 45 1279ASL 02L 30# 134.17 45 1279AS 02L XLL 30# 130.01
60psi 45 1279AS 02L 60# 98.33 45 1279ASL 02L 60# 134.17 45 1279AS 02L XLL 60# 130.01
100psi 45 1279AS 02L 100# 98.33 45 1279ASL 02L100# 134.17 45 1279AS 02L XLL 100# 130.01
200psi 45 1279AS 02L 200# 98.33 45 1279ASL 02L 200# 134.17 45 1279AS 02L XLL 200# 130.01
300psi 45 1279AS 02L 300# 98.33 45 1279ASL 02L 300# 134.17 45 1279AS 02L XLL 300# 130.01
400psi 45 1279AS 02L 400# 98.33 45 1279ASL 02L 400# 134.17 45 1279AS 02L XLL 400# 130.01
600psi 45 1279AS 02L 600# 98.33 45 1279ASL 02L 600# 134.17 45 1279AS 02L XLL 600# 130.01
1000psi 45 1279AS 02L1000# 98.33 45 1279ASL 02L 1000# 134.17 45 1279AS 02L XLL 1000# 130.01
316L Stainless Steel Tube and Socket
 Dry Glycerin Fill "Plus"
Pressure Item # Price Item # Price Item # Price
30" HG VAC 45 1279SS 02L VAC $155.84 45 1279SSL 02L VAC $192.50 45 1279SS 02L XLL-VAC $187.50
15psi 45 1279SS 02L 15# 155.84 45 1279SSL 02L15# 192.50 45 1279SS 02L XLL-15# 187.50
30psi 45 1279SS 02L 30# 155.84 45 1279SSL 02L 30# 192.50 45 1279SS 02L XLL 30# 187.50
60psi 45 1279SS 02L 60# 155.84 45 1279SSL 02L 60# 192.50 45 1279SS 02L XLL 60# 187.50
100psi 45 1279SS 02L 100# 155.84 45 1279SSL 02L100# 192.50 45 1279SS 02L XLL 100# 187.50
200psi 45 1279SS 02L 200# 155.84 45 1279SSL 02L 200# 192.50 45 1279SS 02L XLL 200# 187.50
300psi 45 1279SS 02L 300# 155.84 45 1279SSL 02L 300# 192.50 45 1279SS 02L XLL 300# 187.50
400psi 45 1279SS 02L 400# 155.84 45 1279SSL 02L 400# 192.50 45 1279SS 02L XLL 400# 187.50
600psi 45 1279SS 02L 600# 155.84 45 1279SSL 02L 600# 192.50 45 1279SS 02L XLL 600# 187.50
1000psi 45 1279SS 02L1000# 155.84 45 1279SSL 02L 1000# 192.50 45 1279SS 02L XLL 1000# 187.50
Duragauge
Duragauge
 PVC Polypro Kynar PVDF
 Pipe Size w/EPDM w/Viton w/EPDM w/Viton w/EPDM w/Viton*
 1
⁄2" $441.60 $467.20 $457.60 $476.80 $886.40 $910.40
 3
⁄4" 472.00 496.00 486.40 507.20 974.40 1,000.00
 1" 500.80 526.40 516.80 536.00 992.00 1,028.80
 11
⁄2" 590.40 518.40 604.80 625.60 1,083.20 1,107.20
 2" 628.80 654.40 644.80 664.00 1,204.80 1,231.70
Note: Deduct $45.00 if ordered without gauge. * Kynar PVDF units include Class 100 CDB Procedure
Series GGMU Ultra-Pure Gauge Guards
with 21
⁄2" Gauge
Zero dead-leg inline gauge guard and instrument isolator
for deionized water and other critical processes; flexible
elastomer spool and crevice-free Plast-O-Pure gasket
assures crevice-free connection to spigots. Instrument connection
is standard 1
⁄4" NPT. ±2% accuracy assures accurate
readings for pressure or vacuum. Available with or without
gauge, for a variety of piping systems. Call your Webb
plastics specialists in Methuen for your specific needs.
Commercial
Hydraulic Gauge
Improved! Improved!
Series “GGMU” Ultra Pure Gauge Guard w/21
⁄2" Stainless Steel Gauges
From Only
$
6833
www.fwwebb.com/plastics
n IP67 Weatherproof Enclosure
n Battery Operated (2AA)
n 0.50% Accuracy (0.25% Optional)
n ¼" NPT Male pressure connection (Lower)
n 17-4 ph Sensor and 316L socket, laser welded
n 21
⁄4" Dial
 Pressure Item # Price
 0 inHg/-30inHg FH2551N0M02L01#&V $277.97
 15 psi FH2551N0M02L15# 277.97
 30 psi FH2551N0M02L30# 277.97
 50 psi FH2551N0M02L50# 277.97
 60 psi FH2551N0M02L60# 277.97
 100 psi FH2551N0M02L100# 277.97
 150 psi FH2551N0M02L150# 277.97
 200 psi FH2551N0M02L200# 277.97
 300 psi FH2551N0M02L300# 277.97
 500 psi FH2551N0M02L500# 277.97
 750 psi FH2551N0M02L750# 277.97
 1000 psi FH2551N0M02L1000# 277.97
Digital Pressure Gauge
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 74
74_74 3/30/14 11:00 AM Page 74
Gauges
 Pressure Item # Price
 30" HG VAC EA 14 H $12.60
 15psi EA 14 Z 12.60
 30psi EA 14 A 12.60
 60psi EA 14 B 12.60
 100psi EA 14 C 12.60
 160psi EA 14 D 12.60
 200psi EA 14 E 12.60
 300psi EA 14 F 12.60
 500psi EA 14 G 12.60
 30" HG 0 30psi EA 14 J 12.60
 30" HG 0 100psi EA 14 K 12.60
HVAC/Contractor Gauge
41
⁄2" Face!
 Dry Glycerin Fill "Plus"
Pressure Item # Price Item # Price Item # Price
Stainless Tube, Bronze Socket 21
⁄2" Dial
30" HG VAC 25 1009AW 02L VAC $45.83 25 1009AWL 02L VAC $53.33 25 1009AW 02L XLL VAC $51.66
15psi 25 1009AW 02L 15# 45.83 25 1009AWL 02L 15# 53.33 25 1009AW 02L XLL 15# 51.66
30psi 25 1009AW 02L 30# 45.83 25 1009AWL 02L 30# 53.33 25 1009AW 02L XLL 30# 51.66
60psi 25 1009AW 02L 60# 45.83 25 1009AWL 02L 60# 53.33 25 1009AW 02L XLL 60# 51.66
100psi 25 1009AW 02L 100# 45.83 25 1009AWL 02L 100# 53.33 25 1009AW 02L XLL 100# 51.66
200psi 25 1009AW 02L 200# 45.83 25 1009AWL 02L 200# 53.33 25 1009AW 02L XLL 200# 51.66
300psi 25 1009AW 02L 300# 45.83 25 1009AWL 02L 300# 53.33 25 1009AW 02L XLL 300# 51.66
400psi 25 1009AW 02L 400# 45.83 25 1009AWL 02L 400# 53.33 25 1009AW 02L XLL 400# 51.66
600psi 25 1009AW 02L 600# 45.83 25 1009AWL 02L 600# 53.33 25 1009AW 02L XLL 600# 51.66
1000psi 25 1009AW 02L 1000# 45.83 25 1009AWL 02L 1000# 53.33 25 1009AW 02L XLL 1000# 51.66
Stainless Tube and Socket 21
⁄2" Dial
30" HG VAC 25 1009SW 02L VAC $65.83 25 1009SWL 02L VAC $71.67 25 1009SW 02L XLL VAC $71.67
15psi 25 1009SW 02L 15# 65.83 25 1009SWL 02L 15# 71.67 25 1009SW 02L XLL 15# 71.67
30psi 25 1009SW 02L 30# 65.83 25 1009SWL 02L 30# 71.67 25 1009SW 02L XLL 30# 71.67
60psi 25 1009SW 02L 60# 65.83 25 1009SWL 02L 60# 71.67 25 1009SW 02L XLL 60# 71.67
100psi 25 1009SW 02L 100# 65.83 25 1009SWL 02L 100# 71.67 25 1009SW 02L XLL 100# 71.67
200psi 25 1009SW 02L 200# 65.83 25 1009SWL 02L 200# 71.67 25 1009SW 02L XLL 200# 71.67
300psi 25 1009SW 02L 300# 65.83 25 1009SWL 02L 300# 71.67 25 1009SW 02L XLL 300# 71.67
400psi 25 1009SW 02L 400# 65.83 25 1009SWL 02L 400# 71.67 25 1009SW 02L XLL 400# 71.67
600psi 25 1009SW 02L 600# 65.83 25 1009SWL 02L 600# 71.67 25 1009SW 02L XLL 600# 71.67
1000psi 25 1009SW 02L 1000# 65.83 25 1009SWL 02L 1000# 71.67 25 1009SW 02L XLL 1000# 71.67
Stainless Tube, Bronze Socket 31
⁄2" Dial
30" HG VAC 35 1009AW 02L VAC $56.67 35 1009AWL 02L VAC $69.17 35 1009AW 02L XLL VAC $62.50
15psi 35 1009AW 02L 15# 56.67 35 1009AWL 02L 15# 69.17 35 1009AW 02L XLL 15# 62.50
30psi 35 1009AW 02L 30# 56.67 35 1009AWL 02L 30# 69.17 35 1009AW 02L XLL 30# 62.50
60psi 35 1009AW 02L 60# 56.67 35 1009AWL 02L 60# 69.17 35 1009AW 02L XLL 60# 62.50
100psi 35 1009AW 02L 100# 56.67 35 1009AWL 02L 100# 69.17 35 1009AW 02L XLL 100# 62.50
200psi 35 1009AW 02L 200# 56.67 35 1009AWL 02L 200# 69.17 35 1009AW 02L XLL 200# 62.50
300psi 35 1009AW 02L 300# 56.67 35 1009AWL 02L 300# 69.17 35 1009AW 02L XLL 300# 62.50
400psi 35 1009AW 02L 400# 56.67 35 1009AWL 02L 400# 69.17 35 1009AW 02L XLL 400# 62.50
600psi 35 1009AW 02L 600# 56.67 35 1009AWL 02L 600# 69.17 35 1009AW 02L XLL 600# 62.50
1000psi 35 1009AW 02L 1000# 56.67 35 1009AWL 02L 1000# 69.17 35 1009AW 02L XLL 1000# 62.50
Stainless Tube and Socket 31
⁄2" Dial
30" HG VAC 35 1009SW 02L VAC $75.83 35 1009SWL 02L VAC $83.34 35 1009SW 02L XLL VAC $81.67
15psi 35 1009SW 02L 15# 75.83 35 1009SWL 02L 15# 83.34 35 1009SW 02L XLL 15# 81.67
30psi 35 1009SW 02L 30# 75.83 35 1009SWL 02L 30# 83.34 35 1009SW 02L XLL 30# 81.67
60psi 35 1009SW 02L 60# 75.83 35 1009SWL 02L 60# 83.34 35 1009SW 02L XLL 60# 81.67
100psi 35 1009SW 02L 100# 75.83 35 1009SWL 02L 100# 83.34 35 1009SW 02L XLL 100# 81.67
200psi 35 1009SW 02L 200# 75.83 35 1009SWL 02L 200# 83.34 35 1009SW 02L XLL 200# 81.67
300psi 35 1009SW 02L 300# 75.83 35 1009SWL 02L 300# 83.34 35 1009SW 02L XLL 300# 81.67
400psi 35 1009SW 02L 400# 75.83 35 1009SWL 02L 400# 83.34 35 1009SW 02L XLL 400# 81.67
600psi 35 1009SW 02L 600# 75.83 35 1009SWL 02L 600# 83.34 35 1009SW 02L XLL 600# 81.67
1000psi 35 1009SW 02L 1000# 75.83 35 1009SWL 02L 1000# 83.34 35 1009SW 02L XLL 1000# 81.67
n CASE:
Stainless steel
n WETTED PARTS:
Phosphor bronze tube,
brass socket
n WINDOW: Plastic
n POINTER: Adjustable
n CONNECTION: 1
⁄4" NPT lower
Ashcroft pressure gauges feature the patented Powerflex
movement for greater resistance to the effects of pulsation
and vibration, a stainless steel case for protection from harsh
environments, and glycerin fill in the case for added protection
against pulsation and vibration.
OPTIONS AVAILABLE:
Plus! Performance: Gives the performance of a liquid filled
gauge in a dry case! Temp ranges from -40°F to 300°F. UClamp,
front flange, throttle plugs, silicone fill.
Quick Spec
n CASE: Stainless steel
n WETTED PARTS: Stainless steel tube and socket. Bronze,
or stainless steel tube and stainless steel socket
n WINDOW: Plastic
n CONSTURCTION: All welded
n CONNECTION: 1
⁄4" NPT lower (back available)
n ACCURACY: ASME B.40.1 Grade 1A, +/- 1% full scale
n CASE: Stainless steel –
hermetically sealed
n CONSTRUCTION: All welded
stainless steel
n WINDOW: Glass
n DIAL: 5"
n CONNECTION: Everyangle™
adjustable swivel connection
n ACCURACY: ASME B.40.3, Grad A
(+/- 1% full scale)
Adjust Angle
Thermometer
Bimetal Thermometer
 21
⁄2" Stem 4" Stem 6" Stem
 Range Item # Item # Item #
-80/120°F 50EI60E025 -80/120F 50EI60E040 -80/120F 50EI60E060 -80/120F
-20/120°F 50EI60E040 -20/120F 50EI60E060 -20/120F
30/130°F 50EI60E040 30/130F 50EI60E060 30/130F
0/200°F 50EI60E025 0/200F 50EI60E040 0/200F 50EI60E060 0/200F
0/250°F 50EI60E025 0/250F 50EI60E040 0/250F 50EI60E060 0/250F
50/300°F 50EI60E025 50/300F 50EI60E040 50/300F 50EI60E060 50/300F
50/400°F 50EI60E025 50/400F 50EI60E040 50/400F 50EI60E060 50/400F
50/550°F 50EI60E025 50/550F 50EI60E040 50/550F 50EI60E060 50/550F
200/700°F 50EI60E040 200/700F 50EI60E060 200/700F
100/800°F 50EI60E040 100/800F 50EI60E060 100/800F
200/1000°F 50EI60E040 200/1000F 50EI60E060 200/1000F
9" SCALE
 31
⁄2 " Stem 6" Stem 9" Stem
Range Item # Price Item # Price Item # Price
-40/110°F A935F1 $26.07 A960AF1 $33.89 A990AFI $42.76
0/ 20°F A935F2 26.07 A960AF2 33.89 A990AF2 42.76
0/160°F A935F3 26.07 A960AF3 33.89 A990AF3 42.76
30/180°F A935F4 26.07 A960AF4 33.89 A990AF4 42.76
30/240°F A935F5 26.07 A960AF5 33.89 A990AF5 42.76
30/300°F A935F6 26.07 A960AF6 33.89 A990AF6 42.76
Webb Price Only $
11417
1009AW
Duralife Type 1009SS Gauge
Industrial
Liquid Filled
Gauges
n Mercury free,
spirit filled
n Valox case
Duralife Type 1009SS Gauge
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 75
75_75 3/30/14 11:02 AM Page 75
Quick Spec
n WETTED PARTS: Stainless steel tube and socket
n WINDOW: Plastic
n CONSTRUCTION: All welded
n CONNECTION: 1
⁄4" NPT lower (back available)
n ACCURACY: ASME B.4.01 Grade B (+/- 3-2-3% full scale)
Industrial Stainless Case 1008A/AL (21
⁄2" and 4")
Webb tech tip
Where vibration and/or pulsation are encountered, specify ASHCROFT Type
1008AL, 1008SL, 1009AWL or 1009SWL. The glycerine fill provides a steady pointer for
easy reading, while prolonging guage life. OR specify ASHCROFT “Plus” offering the
same advantages in a liquidless case.
Stainless Tube and Socket 4" (100mm) Dial
 Dry Glycerin Fill "Plus"
 Pressure Item # Price Item # Price Item # Price
30" HG VAC 100 1008S 02L VAC $76.15 100 1008SL 02L VAC $80.77 100 1008S 02L XLL VAC $80.77
15psi 100 1008S 02L 15# 76.15 100 1008SL 02L 15# 80.77 100 1008S 02L XLL 15# 80.77
30psi 100 1008S 02L 30# 76.15 100 1008SL 02L 30# 80.77 100 1008S 02L XLL 30# 80.77
60psi 100 1008S 02L 60# 76.15 100 1008SL 02L 60# 80.77 100 1008S 02L XLL 60# 80.77
100psi 100 1008S 02L 100# 76.15 100 1008SL 02L 100# 80.77 100 1008S 02L XLL100# 80.77
200psi 100 1008S 02L 200# 76.15 100 1008SL 02L 200# 80.77 100 1008S 02L XLL 200# 80.77
300psi 100 1008S 02L 300# 76.15 100 1008SL 02L 300# 80.77 100 1008S 02L XLL 300# 80.77
400psi 100 1008S 02L 400# 76.15 100 1008SL 02L 400# 80.77 100 1008S 02L XLL 400# 80.77
600psi 100 1008S 02L 600# 76.15 100 1008SL 02L 600# 80.77 100 1008S 02L XLL 600# 80.77
1000psi 100 1008S 02L 1000# 76.15 100 1008SL 02L 1000# 80.77 100 1008S 02L XLL 1000# 80.77
Bronze Tube, Brass Socket 4" (100mm) Dial
 Dry Glycerin Fill
 Pressure Item # Price Item # Price
 30" HG VAC 100 1008A 02L VAC $24.23 100 1008AL 02L VAC $26.81
 15psi 100 1008A 02L 15# 24.23 100 1008AL 02L 15# 26.81
 30psi 100 1008A 02L 30# 24.23 100 1008AL 02L 30# 26.81
 60psi 100 1008A 02L 60# 24.23 100 1008AL 02L 60# 26.81
 100psi 100 1008A 02L 100# 24.23 100 1008AL 02L 100# 26.81
 200psi 100 1008A 02L 200# 24.23 100 1008AL 02L 200# 26.81
 300psi 100 1008A 02L 300# 24.23 100 1008AL 02L 300# 26.81
 400psi 100 1008A 02L 400# 24.23 100 1008AL 02L 400# 26.81
 600psi 100 1008A 02L 600# 24.23 100 1008AL 02L 600# 26.81
 1000psi 100 1008A 02L 1000# 24.23 100 1008AL 02L 1000# 26.81
Steel Case/Dry Gauge
 2" Dial 21
⁄2" Dial
 Pressure Item # Price Item # Price
 30" HG VAC 20 1005H 02L VAC $7.84 25 1005H 02L VAC $9.06
 15psi 20 1005H 02L 15# 7.84 25 1005H 02L 30# 9.06
 30psi 20 1005H 02L 30# 7.84 25 1005H 02L 60# 9.06
 60psi 20 1005H 02L 60# 7.84 25 1005H 02L 60# 9.06
 100psi 20 1005H 02L 100# 7.84 25 1005H 02L 100# 9.06
 200psi 20 1005H 02L 200# 7.84 25 1005H 02L 200# 9.06
 300psi 20 1005H 02L 300# 7.84 25 1005H 02L 300# 9.06
 400psi 20 1005H 02L 400# 7.84 25 1005H 02L 400# 9.06
 600psi 20 1005H 02L 600# 7.84 25 1005H 02L 600# 9.06
 1000psi 20 1005H 02L 1000# 7.84 25 1005H 02L 1000# 9.06
Stainless Tube and Socket 21
⁄2" (63mm) Dial
 Dry Glycerin Fill "Plus"
 Pressure Item # Price Item # Price Item # Price
30" HG VAC 63 1008S 02L VAC $39.97 63 1008SL 02L VAC $43.08 63 1008S 02L XLL VAC $43.08
15psi 63 1008S 02L 15# 39.97 63 1008SL 02L 15# 43.08 63 1008S 02L XLL 15# 43.08
30psi 63 1008S 02L 30# 39.97 63 1008SL 02L 30# 43.08 63 1008S 02L XLL 30# 43.08
60psi 63 1008S 02L 60# 39.97 63 1008SL 02L 60# 43.08 63 1008S 02L XLL 60# 43.08
100psi 63 1008S 02L 100# 39.97 63 1008SL 02L 100# 43.08 63 1008S 02L XLL100# 43.08
200psi 63 1008S 02L 200# 39.97 63 1008SL 02L 200# 43.08 63 1008S 02L XLL 200# 43.08
300psi 63 1008S 02L 300# 39.97 63 1008SL 02L 300# 43.08 63 1008S 02L XLL 300# 43.08
400psi 63 1008S 02L 400# 39.97 63 1008SL 02L 400# 43.08 63 1008S 02L XLL 400# 43.08
600psi 63 1008S 02L 600# 39.97 63 1008SL 02L 600# 43.08 63 1008S 02L XLL 600# 43.08
1000psi 63 1008S 02L 1000# 39.97 63 1008SL 02L 1000# 43.08 63 1008S 02L XLL 1000# 43.08
Commercial Gauges (2" and 21
⁄2")
Bronze Tube, Brass Socket 21
⁄2" (63mm) Dial
 Dry Glycerin Fill
 Pressure Item # Price Item # Price
 30" HG VAC 63 1008A 02L VAC $19.98 63 1008AL 02L VAC $21.79
 15psi 63 1008A 02L 15# 19.98 63 1008AL 02L 15# 21.79
 30psi 63 1008A 02L 30# 19.98 63 1008AL 02L 30# 21.79
 60psi 63 1008A 02L 60# 19.98 63 1008AL 02L 60# 21.79
 100psi 63 1008A 02L 100# 19.98 63 1008AL 02L 100# 21.79
 200psi 63 1008A 02L 200# 19.98 63 1008AL 02L 200# 21.79
 300psi 63 1008A 02L 300# 19.98 63 1008AL 02L 300# 21.79
 400psi 63 1008A 02L 400# 19.98 63 1008AL 02L 400# 21.79
 600psi 63 1008A 02L 600# 19.98 63 1008AL 02L 600# 21.79
 1000psi 63 1008A 02L 1000# 19.98 63 1008AL 02L 1000# 21.79
Quick Spec
n WETTED PARTS: Bronze tube, brass
socket
n WINDOW: Plastic
n CONNECTION: 1
⁄4" NPT lower
(back available)
n ACCURACY: ASME B.40.1 Grade B
(+ /- 3-2-3% full scale)
Quick Spec
n CASE: Steel
n WETTED PARTS: Bronze tube and
brass socket
n WINDOW: Plastic
n CONNECTION: 1
⁄4" NPT lower
(back available)
n ABS available
Industrial Stainless Case
Gauge 1008S/SL (21
⁄2" and 4")
Gauges
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 76
76_76 3/30/14 11:04 AM Page 76
FLT Series Plastic Simplex Bag Filters
Single or Double Length
All-Plastic Simplex Bag Filter. It will never rust or corrode and
never compromise quality of the process fluid. Offered in PVC
and CPVC with FPM or EPDM seals. End connections are 2 in. true
union socket, threaded or flanged. Simplex or Duplex available.
Filters & Strainers
FEATURES
n Hand removable cover n In-line or loop flow n Vent valve on cover
Quick Spec
n Size: Single Length 7" x 17", 2.5 sq. ft.
n Material: PVC, CPVC
n Piping Connection: 2" Threaded
n Seal: FPM or EPDM
n Flow Rate: Up to 50 GPM (clean bag)
Simplex bag filters use single length 7" x 16" No.1 bags or double
length 7" x 32" No. 2 bags
CPVC
PVC
CFLV Series Simplex
Cartridge Filter Housing
Offered in the revolutionary Platinum GFPP with
FPM seals only. Units are Simplex, Duplex,
Triplex and Quadplex. True union end connections
in sizes 2" to 4".
Size FLV Bag Housing Price CFLV Cartridge Housing Price Description
 11
⁄4 FLV4P1S12T4VS $1,453.60 Filter DBL, with GFPP 11
⁄4 Thread
 11
⁄2 FLV4P1S15T4VS 1,453.60 Filter DBL, with GFPP 11
⁄2 Thread
 2 FLV4P1S20T4VS 1,453.60 CFLV4P2S20T4V $1,327.58 Filter DBL, with GFPP 2 Thread
 3 CFLV4P2S30T4V 1,907.08 Filter DBL, with GFPP 3 Thread
 4 CFLV4P2S40T4V 2,155.41 Filter DBL, with GFPP 4 Thread
 11
⁄4 FLV4P1S12F4VS 1,962.26 Filter DBL, with GFPP 11
⁄4 Flange
 11
⁄2 FLV4P1S15F4VS 1,962.26 Filter DBL, with GFPP 11
⁄2 Flange
 2 FLV4P1S20F4VS 1,962.26 CFLV4P2S20DF4V 1,871.55 Filter DBL, with GFPP 2 Flange
 11
⁄4 FLV4P1S12S1VS 1,526.27 Filter DBL, with PVC 11
⁄4 Socket
 11
⁄2 FLV4P1S15S1VS 1,526.27 Filter DBL, with PVC 11
⁄2 Socket
 2 FLV4P1S20S1VS 1,526.27 CFLV4P2S20S2V 1,495.31 Filter DBL, with PVC 2 Socket
 3 CFLV4P2S30S1V 1,524.94 Filter DBL, with PVC 3 Socket
 4 CFLV4P2S40S1V 2,451.29 Filter DBL, with PVC 4 Socket
 11
⁄4 FLV4P1S12S2VS 1,628.02 Filter DBL, with CPVC 11
⁄4 Socket
 11
⁄2 FLV4P1S15S2VS 1,628.02 Filter DBL, with CPVC 11
⁄2 Socket
 2 FLV4P1S20S2VS 1,628.02 CFLVV4P2S20S2V 1,495.31 Filter DBL, with CPVC 2 Socket
 3 CFLVV4P2S30S2V 1,524.94 Filter DBL, with CPVC 3 Socket
 4 CFLVV4P2S40S2V 2,451.29 Filter DBL, with CPVC 4 Socket
 11
⁄4 FLV4P1S12T4VS 1,453.60 Filter SNGL, with GFPP 11
⁄4 Thread
 11
⁄2 FLV4P1S15DF4VS 1,962.37 Filter SNGL, with GFPP 11
⁄2 Flange
 2 FLV4P1S20D4VS 1,526.99 CFLV4P1S20T4V 1,243.22 Filter SNGL, with GFPP 2 Thread
 2 FLV4P1S20DF4VS 2,035.81 CFLVP1S20DF4V 1,825.43 Filter SNGL, with GFPP 2 Flange
 3 CFLV4P1S20S1V 1,315.89 Filter SNGL, with PVC 2 Socket
 4 CFLV4P1S20S2V 1,417.64 Filter SNGL, with CPVC 2 Flange
FLV Series Simplex Bag
Filter Housing
Features a one piece, injection molded. Platinum
Glass Filled Polypropylene body with FPM Seal.
Filter bags sold separately.
 A D E F G H J
 8.86" ~ 10.17" 4.50" 47.83" 39.0" 7.60" 31.25" 20.93"
1) Vent Valve, 2) Cover, 3) Filler Body, 4) End Connector, 5) Assembly Nut, 6) Alternate 2"NPT Port,
7) Internally molded Mount Pad.
WATTS® Jumbo Cartridge Filters GLASS-REINFORCED
POLYPROPLYLENE
APPLICATIONS
n Commercial filtration
n Industrial filtration
n Pre-filtration for reverse
osmosis equipment
n Replacement for bag filters
for more filter area
n Replacement for multiple
cartridge filters for greater
convenience
n Whole house filtration
BBH-150 WATTS Housing Filter $632.02
 Media Micron
Cartridge Type Item # Type Rating Price
Pleated BBC-150-P1A PP 1 Absolute $169.79
Pleated BBC-150-P1 PP 1 149.80
Pleated BBC-150-P5 PP 5 139.67
Pleated* BBC-150-P20 PP 20 136.15
Pleated* BBC-150-P50 PE 50 128.42
Pleated* BBC-150-PM150 Mesh 150 133.54
Depth BBC-150-D1 PP 1 55.79
Depth BBC-150-D5 PP 5 48.63
Depth BBC-150-D20 PP 20 48.63
Depth BBC-150-D50 PP 50 48.63
Activated Carbon BBC-150-AC Activated Carbon 10 271.36
*Note: 20, 50 and 150 cartridges are cleanable and reusable to reduce costs.
SPECIFICATIONS
n Maximum flow rate 150 GPM* (36 M3/hr.)
n Maximum flow (carbon) 15 GPM
n Maximum flow (1 Absolute) 50 GPM
n Maximum temperature 175°F (80°C) @ 80 psi
n Maximum working pressure 125 psi (8.75 bar)
n Burst test 300 psi
n Cycle test 100,000
* Highly dependent on micron rating, solids content and other factors.
Depth
cartridge
WATTS Housing
Filter 2"
With optional activated carbon cartridge.
Description PVC FLT Housing Price CPVC FLT Housing Price
Filter SNGL, 2" Soc / Thrd. FLT1201 $2,020.32 FLT2201 $3,572.81
Filter DBL, 2" Soc / Thrd. FLT1202 2,204.05 FLT2202 4,022.54
Filter SNGL, 2" Flange FLT1201F 2,146.10 FLT2201F 3,729.13
Filter DBL, 2" Flange FLT1202F 2,328.41 FLT2202F 4,178.82
BBH-150
$
63202
Operating Temperature/Pressure Dimensions
NEW
POLYLINE™ Filter Housings
Webb tech
tip THREE CARTRIDGE TYPES
Pleated cartridges – offering greater
efficiency, more surface area for greater
throughput and reduced cost. Depth
cartridges – depth filtration is necessary
for gelatinous substances and when
chemical resistance may be a requirement.
Activated carbon – Ideal for
whole house filtration to reduce chlorine,
taste, odors and sediment.
n Choice of PPL or PVDF
n Ultra-pure applications
n Corrosive applications.
n Vent In 1
⁄4"
n Inlet/Outlet 2"
n Max. Pressure 150
n Max. Temp 70°F
A vent/bleed valve installed on the housing
cover and an integral mounting
flange. The two bottom pipe connections
are interchangeable as outlet or drain, inline
or loop piping arrangements.
PPL/PVDF
models feature
external cover
threads
Call regarding
an extensive
line of metal
filter housings
and filters.
 Bag Max. Flow Max. Press. Max. Temp. Inlet
 Description Size GPM* Material GAL Outlet Type Price
 FLT4201F PBF-0101-PO10-020A 1 50 PPL 6.6 Flanged $1,495.39
 FLT4201 PBF-0101-PO10-020N 1 50 PPL 6.6 NPT 1,073.77
 FLT4202F PBF-0102-PO10-020A 2 100 PPL 9.5 Flanged 1,633.85
 FLT4201 PBF-0102-PO10-020N 2 100 PPL 9.5 NPT 1,213.62
 FLT5201F PBF-0102-PF07-020A 2 100 PVDF 9.5 Flanged 7,434.77
*Maximum theoretical flow based on water viscosity, bag specific
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 77
77_77 3/30/14 11:08 AM Page 77
Filters & Strainers
PROTECT SYSTEM COMPONENTS
When pipeline system components require protection from dirt
and debris and the line can be shut down for basket cleaning,
a HAYWARD® All Plastic Simplex Basket Strainer is the ideal
choice. Unwanted particles are removed as the process
media passes through a perforated strainer basket contained
inside the strainer body. The basket traps the unwanted
material while allowing the process media to flow freely.
Each Simplex Basket Strainer includes one plastic basket. If
perforation is not specified, then standard basket perforation
will be shipped.
OPTIONS
n Stainless steel, Monel & Hastelloy
strainer baskets
n Pressure differential gauge and switch
n PVC, Corzan® CPVC and Eastar®
n Ergonomic hand-removable cover
n In-line or loop connections
n External cover threads
n Integral flat mounting base
 Size Material End Connection Seal Pressure Rating
1
⁄2" to 4" (DN15-DN100) PVC, CPVC, Eastar® (clear) Socket, Threaded or Flanged FPM or EPDM 150 PSI @ 70°F
6" to 8" (DN150-DN200) PVC, CPVC Flanged non-shock
Starting At
$
301 94
As Low As
$
12232
Size End PVC Price CPVC Price Eastar (Clr) Price GFPP * (Blk) Price
 1
⁄2" Socket SB1050ST $301.94 SB2050ST $451.46 SBC050ST $332.18
 Thread SB4050T $353.34
 Flange SB1050F 347.12 SB2050F 494.10 SBC050F 382.32
 3
⁄4" Socket SB1075ST 301.94 SB2075ST 451.46 SBC075ST 332.18
 Thread SB4075T 390.94
 Flange SB1075F 347.12 SB2075F 494.10 SBC075F 382.31
 1" Socket SB1100ST 301.94 SB2100ST 451.46 SBC100ST 332.18
 Thread SB4100T 390.94
 Flange SB1100F 347.12 SB2100F 494.10 SBC100F 382.31 SB4100F 421.32
11
⁄4" Socket SB1125ST 520.76 SB2125ST 803.74 SBC125ST 573.69
 Thread SB4125T 674.15
 Flange SB1125F 618.93 SB2125F 904.25 SBC125F 681.12 SB4125F 751.19
11
⁄2" Socket SB1150ST 520.76 SB2150ST 803.74 SBC150ST 573.69
 Thread SB4150T 674.15
 Flange SB1150F 618.93 SB2150F 904.25 SBC150F 681.12 SB4150F 751.19
 2" Socket SB1200ST 520.76 SB2200ST 803.74 SBC200ST 573.69
 Thread SB4200T 674.15
 Flange SB1200F 618.93 SB2200F 904.25 SBC200F 681.12 SB4200F 751.19
 3" Socket SB1300S 1,331.69 SB2300S 1,779.38 SBC300S 1,467.29
 Thread SB1300T 1,331.69 SB2300T 1,779.38 SBC300T 1,467.29 SB4300T 1,616.23
 Flange SB1300F 1,513.57 SB2300F 2,290.68 SBC300F 1,665.29 SB4300F 1,959.43
 4" Socket SB1400S 1,331.69 SB2400S 1,724.63 SBC400S 1,467.30
 Thread SB1400T 1,331.69 SB2400T 1,724.63 SBC400T 1,467.30 SB4400T 1,616.23
 Flange SB1400F 1,513.57 SB2400F 2,294.01 SBC400F 1,837.70 SB4400F 1,824.10
 6" Flange SB1600FT 3,439.30 SB2600FT 4,387.59 SBC600F
 8" Flange SB1800FT 6,084.88 SB2800FT 5,780.64 SBC800F
EPDM O-rings also available, * New Color- Platinum Same Price SB4P_ _ _ _
SB Series Simplex Plastic Basket Strainers “Newer Style” 1
⁄2" to 8"
SB & DB Series Extra/
Replacement Basket
NEW & OLD STYLES
New Style Old Style
 Perforation For ½", ¾" & 1" 11
⁄4", 11
⁄2" & 2" 21
⁄2", 3" & 4" 6" 8'
PVC
 1
⁄32" BS11001/32 $122.32 BS12001/32 $153.72 BS14001/32 $390.88 BS16001/32 $1,110.19 BS18001/32 $1,533.06
 1
⁄16" BS11001/16 122.32 BS12001/16 153.72 BS14001/16 390.88 BS16001/16 1,110.19 BS18001/16 1,533.06
 1
⁄8" BS11001/8 122.32 BS12001/8 153.72 BS14001/8 390.88 BS16001/8 1,110.19 BS18001/8 1,533.06
 3
⁄16" BS11003/16 122.32 BS12003/16 153.72 BS14003/16 390.88 BS16003/16 1,110.19 BS18003/16 1,533.06
 Old Style BS10100xx/xx 133.06 BS10200xx/xx 167.17 BS10300xx/xx 375.81
 BS10400xx/xx 426.01
CPVC
 1
⁄32" BS21001/32 188.24 BS22001/32 233.46 BS24001/32 588.95 BS26001/32 1,490.08 BS28001/32 2,055.76
 1
⁄16" BS21001/16 188.24 BS22001/16 233.46 BS24001/16 588.95 BS26001/16 1,490.08 BS28001/16 2,055.76
 1
⁄8" BS21001/8 188.24 BS22001/8 233.46 BS24001/8 588.95 BS26001/8 1,490.08 BS28001/8 2,055.76
 3
⁄16" BS21003/16 188.24 BS22003/16 233.46 BS24003/16 588.95 BS26003/16 1,490.08 BS28003/16 2,055.76
 Old Style BS20100xx/xx 204.06 BS20200xx/xx 254.17 BS20300xx/xx 563.81
 BS20400xx/xx 641.01
GFPP
 1
⁄32" BS41001/32 154.04 BS42001/32 193.52 BS44001/32 492.20
 1
⁄16" BS41001/16 154.04 BS42001/16 193.52 BS44001/16 492.20
 1
⁄8" BS41001/8 154.04 BS42001/8 193.52 BS44001/8 492.20
 3
⁄16" BS41003/16 154.04 BS42003/16 193.52 BS44003/16 492.20
 Old Style BS40100xx/xx 226.45 BS40200xx/xx 278.57
316 Stainless Steel (Mesh Also Available 20, 40, 60, 80 & 100 pricing same)
 1
⁄32" BS71001/32 249.24 BS72001/32 309.18 BS74001/32 659.68 BS76001/32 1,369.33 BS7001/32 1,738.36
 1
⁄16" BS71001/16 249.24 BS72001/16 309.18 BS74001/16 659.68 BS27001/16 1,369.33 BS7001/16 1,738.36
 1
⁄8" BS71001/8 249.24 BS72001/8 309.18 BS74001/8 659.68 BS7001/8 1,369.33 BS7001/8 1,738.36
 3
⁄16" BS71003/16 249.24 BS72003/16 309.18 BS74003/16 659.68 BS7003/16 1,369.33 BS7003/16 1,738.36
 Old Style BS70100xx/xx 271.06 BS70200xx/xx 336.17 BS70300xx/xx 629.81 For 200/300 For 200/300
 Or Or BS70400xx/xx 641.01 Mesh Only Mesh Only
 Mesh 20, 40, Mesh 20, 40, Mesh 20, 40, BS760200 1,545.90 BS780200 2,051.90
 60, 80, 100 60, 80, 100 60, 80, 100 BS760325 2,060.19 BS780325 2,149.19
316 Steel are Fabricated and are non-returnable. Hastelloy® and Monel Also Available
ADDITIONAL FEATURES
www.facebook.com/webbplastics
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 78
78_78 3/31/14 7:44 AM Page 78
Filters & Strainers
n PVC or CPVC
n Available IPS ½" through 12"
– Socket, Spigot, Flange
n EPDM or FKM O-ring
n Perf. Basket (PVC,CPV, SS)
– 1
⁄16, 3
⁄32, 1
⁄8, 3
⁄16, 1
⁄4, 3
⁄8" Perf.
n Pressure Gauge 0-160 (guard option)
n Max Flow 6:1
n Max Temp PVC 140°F, CPV 200°F
n Max Pressure 1
⁄2 - 8" 150psi @ 73°F
Designed to remove unwanted solids from plastic or metal piping systems, Spears® Basket
Strainers are ideal for protecting valves, filters, pumps, nozzles or other liquid control devices
in corrosive or non-corrosive fluid systems.
Multi-Featured Industrial Basket Strainer
Size PVC Socket EPDM Price CPVC Socket EPDM Price
1
⁄2" BS22P6-005 $313.12 BS22C6-005C $488.07
1" BS22P6-005 500.75 BS22C6-005C 488.49
2" BS22P6-005 573.51 BS22C6-005C 921.05
4" BS22P6-005 1,752.65 BS22C6-005C 2,413.83
8" BS22P6-005 3,096.88 BS22C6-005C 4,554.17
Call Webb for other size, strainer and configuration requirements
n Fiberglass reinforced
n Easy Grip end cap
n Poly ribbed 316 SS screen
n EPDM gasket FKM available
n Female NPT x Female NPT
n 150 PSI
 11
⁄2" Strainer 2" Strainer Description Price
LS150-06 LS200-06 Y-Strainer GFPP Mesh SS Screen $61.49
LS150-12 LS200-12 Y-Strainer GFPP Mesh SS Screen 61.49
LS150-20 LS200-20 Y-Strainer GFPP Mesh SS Screen 61.49
LS150-30 LS200-30 Y-Strainer GFPP Mesh SS Screen 61.49
LS150-50 LS200-50 Y-Strainer GFPP Mesh SS Screen 61.49
LS150-80 LS200-80 Y-Strainer GFPP Mesh SS Screen 61.49
LS150-120 LS200-120 Y-Strainer GFPP Mesh SS Screen 61.49
Option: All Poly Screen use P end of part number, no additional charge
Poly Micro Valves add $17.52
All plastic construction, uses 1 to 100 micron, 10,
20, or 30 inch filter cartridges. PVC and CPVC.
Used to filter fined particles from process fluids.
Cartridges are not stackable. 5gpm maximum
flow rate per 10" length. FPM seal is standard.
Optional mounting base is available for mounting
unit to floor or work surface, add $35.
FLT Single Cartridge Filters (FOR 21
⁄2" CARTRIDGES)
Item # Description Price
FLT110 PVC 10" 3
⁄4" Inlet FNPT x 3
⁄4" Outlet MNPT 4sq/ft $405.13
FLT120 PVC 20" 3
⁄4" Inlet FNPT x 3
⁄4" Outlet MNPT 8sq/ft 486.55
FLT130 PVC 30" 3
⁄4" Inlet FNPT x 3
⁄4" Outlet MNPT 12sq/ft 630.19
FLT210 CPVC 10" 3
⁄4" Inlet FNPT x 3
⁄4" Outlet MNPT 4sq/ft 540.08
FLT220 CPVC 20" 3
⁄4" Inlet FNPT x 3
⁄4" Outlet MNPT 8sq/ft 675.12
FLT230 CPVC 30" 3
⁄4" Inlet FNPT x 3
⁄4" Outlet MNPT 12sq/ft 810.11
Item # Description Price
SBN020X020F30 2" x 2", 50gpm, 30psi $2,532.54
SBN025X025F30 2.5" x 2.5", 75gpm, 30psi 2,560.46
SBN030X020F30 3" x 2", 110gpm, 30psi 2,598.09
SBN040X040F30 4" x 4", 200gpm, 30psi 2,630.24
SBN080X040F30 8" x 4", 400gpm, 30psi 4,150.58
SBN020X020F65 2" x 2", 50gpm, 65psi 3,184.41
SBN025X025F65 2.5" x 2.5", 75gpm, 65psi 3,209.28
SBN030X020F65 3" x 2", 110gpm, 65psi 3,290.18
SBN040X040F65 4" x 4", 200gpm, 65psi 2,838.17
SBN Series Simplex Basket
Strainer FRP
NEW
SBN Series FRP (fiberglass reinforced) simplex basket
strainers are available in 30 or 65 PSI with a variety of
Inlet/Outlet sizes. Sizes range from 2" through 14" with
different combinations.
n Manufactured to ASTM and
ASME Standards
n FRP Cover with Viewing Window
n 30 and 65 PSI Operating
Pressure
n Vertically Pleated 16 Gauge
Stainless Steel
Baskets with a Minimum 4 to 1
Open Area
n FRP Food Grade Isophthalic Resin
Construction, Flanged
Single Length Price Double Length Price
PP Needle Felt Glazed Filter Bags (xxx): 1, 5, 10, 25, 50, 100, 200 µm
Sewn Construction & PP Ring - Needle Felt Glazed Finish Polyester needle felt bags singed finish
POxxxG1G1PPSH $5.50 POxxxG2PRSH $6.15
PP Needle Felt Glazed Filter Bags (xxx): 1, 5, 10, 25, 50, 100, 200 µm
Welded & PP Flange / Handles - Needle Felt Glazed Finish Polyester needle felt bags singed finish
POxxxG1PFWF 4.85 POxxxG2PFWF 5.85
Polyester Needle Felt Singed Filter Bags (xxx): 1, 5, 10, 25, 50, 100, 200 µm
Sewn Construction & PP Ring - Needle Felt Glazed Finish Polyester needle felt bags singed finish
PExxxS1PRSH 5.15 PExxxS2PRSH 6.10
Polyester Needle Felt Singed Filter Bags (xxx): 1, 5, 10, 25, 50, 100, 200 µm
Welded & PP Flange & Handle - Needle Felt Glazed Finish Polyester needle felt bags singed finish
PExxxS1PFWF 3.95 PExxxS2PFWF 5.50
PP Monofilament Mesh Filter Bags (xxx): 150, 400, 600, 800 µm
Sewn & PP Ring - Needle Felt Glazed Finish Polyester needle felt bags singed finish
PMOxxxM1PRSH 8.10 PMOxxxM2PRSH 11.35
Nylon Monofilament Mesh Filter Bags (xxx): 150, 400, 600, 800 µm
Sewn & PP Ring - Needle Felt Glazed Finish Polyester needle felt bags singed finish
NMOxxxM1PRSH 8.05 NMOxxxM2PRSH 11.20
Sold in Case Quantity Wound PP Filter Cartridge (Case Quantity)
Item # Description Size Price
PWMB10M1 Cartridge 9.875" x 2.50" 1 micron $4.25
PWMB10M5 Cartridge 9.875" x 2.50" 5 micron 4.25
PWMB10M10 Cartridge 9.875" x 2.50" 10 micron 4.25
PWMB10M20 Cartridge 9.875" x 2.50" 20 micron 3.97
PWMB10M50 Cartridge 9.875" x 2.50" 50 micron 3.97
PP Pleated Filter Cartridges 2½" PVC double open end (Case Quantity)
Size 10" Length 20" Length 30" Length
1 micron PO001P210 $40.13 PO001P220 $57.13 PO001P230 $80.13
5 micron PO005P210 39.13 PO005P220 53.13 PO005P230 78.13
10 micron PO010P210 34.13 PO010P220 50.13 PO010P230 75.13
25 micron PO025P210 33.13 PO025P20 48.13 PO025P230 70.13
30 micron PO030P210 32.13 PO030P220 45.13 PO030P230 65.13
Pleated Filter Cartridges 7" PVC double open end (Case Quantity)
Size 16" Length 30" Length
1 micron PO001P716 $237.54 PO001P730 $340.54
5 micron PO005P716 231.54 PO005P730 319.54
10 micron PO010P716 185.67 PO010P730 288.67
30 micron PO030P716 127.54 PO030P730 197.54
Hayward Needle Filter Bags
Polypropylene
Y Strainer 11
⁄2" & 2"
NEW
NEW
NEW
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 79
79_79 3/30/14 11:16 AM Page 79
True Union Sediment Strainer
Mesh (holes per linear inch) 20 30 40
Max. Particle Size (inch) .033 .023 .011
Micron Particle Size (10-3 mm) 840 595 420
Replacement Screens Only
Filter Screen Sizes
Line Strainer Type 306
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Universal 1257005TU $57.12 1257007TU $62.20 1257010TU $74.88 1257012TU $123.13 1257015TU $123.13 1257020TU $151.02 1257030TU $366.08 1257040TU $615.55
Socket – – – – – – – – – – – – 1256030TU 369.34 1256040TU 615.55
Flanged 1258005TU 128.17 1258007TU 138.35 1258010TU 180.23 1258012TU 294.44 1258015TU 294.44 1258020TU 368.06 1258030TU 670.13 1258040TU 1,045.79
NOTES: Connectors; 3" & 4" specify socket or threaded. **11
⁄4" is bushed down from 11
⁄2" strainers.
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3" 4"
PVC Screen Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
20 Mesh 3186005 $22.22 3186007 $22.22 3186010 $26.98 3186012 $28.58 3186015 $28.58 3186020 $34.91 3186030 $41.26 3186040 $53.93
30 Mesh 3187005 22.22 3187007 22.22 3187010 26.98 3187012 28.58 3187015 28.58 3187020 34.91 3187030 41.26 3187040 53.93
40 Mesh 3188005 22.22 3188007 22.22 3188010 26.98 3188012 28.58 3188015 28.58 3188020 34.91 3188030 41.26 3188040 53.93
1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 3"
PVC Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
EPDM 192306300 $42.06 192306350 $49.64 192306400 $54.78 192306450 $94.88 192306500 $99.77 192306550 $125.20 192306650 $213.95
VITON 192306349 51.83 192306399 57.72 192306449 61.63 192306499 104.66 192306549 113.46 192306599 140.84 192306699 251.07
SPECIFICATIONS
Sizes: 1
⁄2" - 4"
Material: PVC
Models: Socket, Threaded, Flanged (ANSI)
Temperature: 32°F to 120°F
Pressure Rating (at ambient temp.): 1
⁄2" - 2" = 150 psi; 3" - 4" = 85 psi
Screens: Standard – 20 mesh PVC
Optional – 30 and 40 mesh PVC
Size 1
⁄2 3
⁄4 1 11
⁄2 2 3 4
Cv 5.2 7.5 14 34 50 110 165
Cv Values
Quick Spec
n True Union design eliminates the need
for flanges and permits installation or
repair without expanding the pipeline
n Transparent PVC strainer body permits
easy evaluation of filter screen's condition
n Corrosion resistant – no metal parts
n Worn or blocked filter screens can be
replaced with filter body in line
n EPDM O-rings provide tight seal
n Easy to clean
n Cor ro sion resistant
n Screens avail able in four different
perforations
n 20 mesh screen standard
n Screens can be removed and
cleaned without removing
strainer from line
n Line strainer type 306 is suit -
able for pro tect ing valves,
pumps and other equip ment
against solid particles
n It is available in transparent
PVC
n Installation position is dependent
on flow di rec tion
From Only
$
5712
Filters & Strainers
PVC 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 21
⁄2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Threaded YS10050T $58.63 YS10075T $64.85 YS10100T $83.06 YS10150T $83.06 YS10150T $129.26 YS10200T $166.12 YS10250T $83.06 YS10300T $207.43 YS10400T $359.33
Socket YS10050S 58.63 YS10075S 64.85 YS10100S 83.06 YS10150S 83.06 YS10150S 129.26 YS10200S 166.12 YS10250S 83.06 YS10300S 207.43 YS10400S 359.33
Flanged – – – – – – – – – – YS10200F 166.12 YS10250F 83.06 YS10300F 207.43 YS10400F 359.33
Corzan® CPVC 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 21
⁄2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Threaded YS20050T $161.93 YS20075T $178.92 YS20100T $229.23 – – YS20150T $356.00 YS20200T $458.39 YS20250T $570.19 YS20300T $570.19 YS20400T $988.05
Socket YS20050S 161.93 YS20075S 178.92 YS20100S 229.23 – – YS20150S 356.00 YS20200S 458.39 YS20250S 570.19 YS20300S 570.19 YS20400S 988.05
Flanged – – – – – – – – – – YS20200F 458.39 YS20250F 570.19 YS20300F 570.19 YS20400F 988.05
Clear PVC 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2" 21
⁄2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Threaded YS00050T $58.63 YS00075T $64.85 YS00100T $83.06 YS00150T $83.06 YS00150T $129.26 YS00200T $166.12 YS00250T $83.06 YS00300T $207.43 YS00400T $359.33
Socket YS00050S 58.63 YS00075S 64.85 YS00100S 83.06 YS00150S 83.06 YS00150S 129.26 YS00200S 166.12 YS00250S 83.06 YS00300S 207.43 YS00400S 359.33
Flanged – – – – – – – – – – YS00200F 166.12 YS00250F 83.06 YS00300F 207.43 YS00400F 359.33
YS Series Plastic Y-Strainers 1
⁄2" to 4"
ECONOMICAL PROTECTION
Hayward Y Strainers protect piping system components from
damage caused by dirt or debris in the process media. They cost
less than other types of strainers and are lightweight and very
compact. Because they can often be supported by the pipeline
alone, they work in applications where other strainers cannot.
Quick Spec
n Rated to 150 PSI
n FPM Seals
n Standard 1
⁄32" perf screen
n Easy Screen Access
n Can Be Used in Horizontal
or Vertical Position
 Size Material End Connection Seal Pressure Rating
 1
⁄2" to 4" (DN15-DN100) PVC or CPVC Socket, Threaded, Flanged or True Union FPM 150 PSI @ 70°F
 1
⁄2" to 2" (DN15-DN50) Clear PVC Threaded Body or Flanged non-shock
All-Plastic Construction
True
Union
Clear YS Series True Union Y-Strainers (additional charge) place a "U" after the listed Item #.
OPTIONS
n Stainless Steel Strainer Screens
n True Union Connections Available
Size PVC Threaded* CPVC Threaded*
1
⁄2 YS21P8-005SR $59.19 YS21C8-005CSR $155.26 3
⁄4 YS21P8-007SR 62.74 YS21C8-007CSR 170.44
1 YS21P8-010SR 68.99 YS21C8-010CSR 222.53
11
⁄2 YS21P8-015SR 123.62 YS21C8-015CSR 342.05
2 YS21P8-020SR 167.74 YS21C8-020CSR 484.42
4 YS21P8-040SR 604.63 YS21C8-040CSR 934.16
Spears® Y-Strainers PVC & CPVC
Produced from PVC Gray, PVC Clear for fluid visibility and CPVC Gray for
higher temperatures. Available with socket, Special Reinforced (SR) threads,
flanged, or True Union socket and SR threaded end connectors in IPS sizes
1
⁄2" - 4". FKM Seals also available. Max service temperature PVC=140°F,
CPVC=200°F. Pressure Rating ½" – 2" =150psi, 3" – 4"=90psi @73°F
*Stainless Reinforced EPDM
“P” = PVC Mesh
“C” = CPVC Mesh
“S” = Stainless
Mesh size:
8 = .094"
12 = .062"
20 = .033"
30 = .024"
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 80
80_80 3/30/14 11:19 AM Page 80
Single Filter Cartridge Housings and Drinking Water Systems
 Item # Type Pipe Pr. Relief Color Price
Polypropylene filter housings for one 20" cartridge (23
⁄4" O.D.).
FH800034PR 3
⁄4" Yes White $43.78
Polypropylene filter housings for Big-Blue filter cartridges (41
⁄2" O.D.).
FH5000WW1PR 10" Big-Blue 1" Yes White 56.24
FH1000WW15PR 20" Big-Blue 11
⁄2" Yes White 70.93
Filters & Strainers
High-Temp housings (rated for temperatures to 200°F / 93°C)
Item # Size PR Sump Pipe Size Price
HD4500HT34 10" No Red 3
⁄4" $68.16
FH8000HT34 20" No Red 3
⁄4" 97.28
Item # Size PR Sump Pipe Size Price
FH4200BB14 10" No Black 1
⁄4" $12.69
FH4200BB34 10" No Black 3
⁄4" 13.73
HD4500BB34PR 10" Yes Black 3
⁄4" 25.84
FH8000BB34PR 20" Yes Black 3
⁄4" 43.27
FH5000BB1PR 10BB Yes Black 1" 51.01
FH10000BB1PR 20BB Yes Black 1" 71.44
Clear housings All black housings
Flowmatic® Plastic Filter Housings
Call for mounting
bracket
Call for O-ring
Wrench
Description Item # Size PR Sump Cap Pipe Size Price
10" Residential Clear FH4200CW14PR 10" Yes Clear White 1
⁄4" $18.88
FH4200CW38PR 10" Yes Clear White 3
⁄8" 18.88
FH4200CW12PR 10" Yes Clear White 1
⁄2" 20.02
FH4200CW34PR 10" Yes Clear White 3
⁄4" 20.02
10" Commercial Clear HD4500CB34 10" No Clear Black 3
⁄4" 29.97
HD4500CB34PR 10" Yes Clear Black 3
⁄4" 29.97
20" Commercial Clear FH8000CB34PR 20" Yes Clear Black 3
⁄4" 67.24
10" Full-Flow (BB) Clear FH5000CB1PR 10" Yes Clear Black 1" 103.63
 Item # Size PR Sump Cap Pipe Size Price
FH4200NP34 10" No NP NP 3
⁄4" $32.84
FH8000NP34 20" No NP NP 3
⁄4" 76.03
FH8000NP34-222 20" No NP NP 3
⁄4" 128.71
Natural Polypropylene Housings (ideal for high purity water)
Natural
Polypropylene
Housings High-Temp
housings
Clear Housings
All Black Housings
 10" Medium Filter Kit 10" Big Filter Kit 20" Medium Filter Kit 20" Big Filter Kit
 Description ¾"Connection, 2½ x 10" 1"Connection, 4½ x 10" ¾"Connection, 2½ x 10" 1½"Connection, 4½ x 20"
Housing Clear Sump PPFYT-10CB-6A $26.16 PPFYTB-10CB-1A $96.61 PPFYTT-20CB-6A $42.06 PPFYTB-20CB-14A $138.36
Housing Aqua Sump PPFYT-10BL-6A 24.80 PPFYTB-10BL-1A 69.81 PPFYTB-10BL-1A 38.44 PPFYTB-20BL-14A 95.16
Carbon Filter Element PPFGAC14 5.98 PPFBFC10 11.13 2-PPFGAC14 11.96 2-PPFBFC10 22.26
PP Fiber 5µ Element PPF14-5 2.50 PPFBFP10-5 9.68 2-PPF14-5 5.03 PPFBFP20-5 19.36
PP Fiber 25µ Element PPF14-25 2.50 PPFBGP10-25 9.68 2-PPF14-25 5.03 PPFBGP20-25 19.36
PP Fiber 50µ Element PPF14-50 2.50 PPFBFP10-50 9.68 2-PPF14-50 5.03 PPFBFP20-50 19.36
O-Ring PPFMT09604 3.56 PPFMT14005 3.56 PPFMT09604 3.56 PPFMT14005 3.56
Mounting Bracket PPF22BXN000 3.76 PPF22BXN0001 3.76 PPF22BXN000 3.76 PPF22BXN0001HH 3.76
Rplcmt. Sump Aqua PPFYTB10-BL1 26.75 PPFYTB10-BL1 26.75
Rplcmt. Sump Clear PPFYTB10-CB1 41.50 PPFYTB10-CB1 41.50
Wrench PPF22B001W 4.86 PPF22B001W 4.86
Mount Support Brk PPF22B10001HH 6.30
n Black Cap with Pressure Relief Valve
n Wrench & Bracket Included
n NSF/ANSI Standard 42 Approved
n Max operating 92psi @125° F
n (1) 5 micron D&R filter included
Single Cartridge Filter Housings
Manufactured from the highest quality, FDA grade, 100%
propropylene and acrylic styrene. Leak-proof sealing is
accomplished by compression against a top seated EPDM
o-ring located in the housing’s sump. Thick wall and
added ribs make the housings ideal for a wide range of
applications. Polypropylene construction provides excellent
chemical resistance with most acids, alcohol, ammonia,
oils, plating solutions and many aggressive chemicals.
Housings supplied
with and without pressure release valves.
Rated for temperatures to 125°F and pressures to 125
psi. Full product line virtually every application where single
cartridge housings are typically used. Select from
standard, heavy duty, full-flow, high purity, high temp
and valve-in-head models.
PurePro Filter Kits
Viton O-Ring
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 81
81_81 3/30/14 11:20 AM Page 81
Filters & Strainers
Filter cartridges are wound in precise manner
to provide true depth filtration through
hundreds of tapered passageways. Depth
wound cartridges offer gradual pressure
increase compared to sudden pressure
increase with surface type filters. Progressive
dirt removal from surface to core provides
high dirt holding capacity. Core covers are
available to prevent fiber migration.
PURE-CLEAR™ Precision Wound Filter Car tridg es
CARBONEX™ DUAL MEDIA FILTER
Outer Media: High efficient depth filter with high dirt holding capacity.
Inner Core: High effective activated carbon treatment media.
n Max. operating temp: 150°F
n Max. operating pressure: 250 psig.
n Max. differential pressure: 100 psid.
n Collapse pressure: 200 psid.
n Approx. net pressure drop: 2.25 psid. at 1 gpm.
n 90% efficienct at 5 Micron
Standard I.D. – 1" (25.4 mm) Standard O.D. – 2.5" (63.5 mm)
 Item # Micron 1 Micron 5 Micron 10 Micron
 CEW x P10 Polypropylene/Carbon $14.57 $14.57 $14.57
 CEW x PF10 Fibrallated Polypropylene/Carbon 20.99 20.99 20.99
 CEP x P10 Polypropylene/Carbon 14.57 14.57 14.57
 CEP x PF10 Fibrallated Polypropylene/Carbon 20.99 20.99 20.99
NOTE: Specify 93
⁄4", 191
⁄2", 291
⁄4", 20", 30" or 40".
Closed Cell
Polyethylene
Foam End
Closed Cell
Polyethylene
Foam End
Extruded Carbon Core Filter Media
Premium Water Carbonex™ CEW & CEP
Series Carbon Filter Cartridges
Big-Blue Cartridges
A complete line of 41
⁄2" OD (11⁄16" ID)
cartridges for both 10" and 20" Big-Blue filter housings. Big-Blue
cartridges are made with our proprietary blend of Polyester-Plus™
filter media; they are thermally bonded for added strength;
cleanable and reusable in most applications; individually shrink
wrapped; and available in 1, 5, 20 and 50 nominal micron ratings.
Item # Microns Length No./Case Price
WPC1FF975 1 93
⁄4" 18 $21.35
WPC5FF975 5 93
⁄4" 18 20.38
WPC20FF975 20 93
⁄4" 18 20.38
WPC50FF975 50 93
⁄4" 18 20.38
WPC1FF20 1 20" 9 37.91
WPC5FF20 5 20" 9 32.46
WPC20FF20 20 20" 9 32.46
WPC50FF20 50 20" 9 32.46
*Temperature limits based on pressure and time under load.
n End Caps:
Plastisol (pliable PVC)
n Center Tubes:
PVC, rigid and perforated
n Flow Rates:
Up to 15 GPM for 10",
30 GPM for 20"
n Temperature:*
Up to 140°F
Cartridge Series Micron Rating Media Length " Cartridge Configuration
( CEW ) or ( CEP ) ( 1 ) ( P ) ( 10 ) Blank ( - )
CEW 1, 5, 10 P = Polypropylene 4, 5, 6, ( - ) No symbol DOE with PE Gasket
Carbonex Series For µm PF = Fibrillated PP 9¾, 10, (BB) 4.5" Outside Dia.(10 & 20" Lengths, DOE only)
Water Application C = Bleached Cotton 19½, 20, (222B) 222 S0E with 222 Buna, No O-ring
 (CEW Only) 29¼, 30, (222V) 222 S0E with 222 Viton O-ring
 39, 40 (226B) 226 S0E with 226 Buna, No O-ring
CEP (226V) 226 S0E with 226 Viton O-ring
Carbonex Series (222S) 222 S0E with 222 Silicone O-ring
For Electroplating (226S) 226 S0E with 226 Silicone O-ring
 (K) Self Seal Spring
Call an Webb Specialist for pricing on other configurations not shown. Sold in Case Qty
Micron
Rating Filter Media Length Core Configuration O-Rings Options
.5 P 912 P
.50 P=Polypropylene 912=9.75" P=Polypropylene Blank= no end S=Silicone Blank=Std
1 * 914=9.87" A=304 SS treatment V=Viton F=FDA
3 PF=Fibrillated 10=10" S=316 SS C=Core Cover B=Buna P=Plain
5 PP 198=19.5" T=Tin Plated Stl. G=DOE PE E=EPDM Pkg.
10 CU=Natural 20=20" Foam Gskt
15 Cotton 294=29.25" X=Extended
20 C=Bleached 298=29.5" PP Core
25 Cotton * 30=30" 222F= 222
30 R=Rayon * 39=39" O-Ring/Flat
50 N=Nylon 40=40" 222S=222
75 K=Polyester FDA O-Ring/Spear
100 A=Acrylic 226F=226
150 G=Fiberglass O-Ring/Flat
200 226S=226
O-Ring/Spear
Size Matrix: 10" Length price x 1, 20" Length price x 2, 30" length price x 3, 40" Length price x 4
Sizes not shown visit us or call visit on web
Standard Diameter 23
⁄8 Option Multiplier For 2, 2¼, 2½, 2¾ x 2½" Note: Big Blue 4.5" O.D.
 Size Single Length* Price/Bag Double Length† Price/Bag
1 micron F31R36590E $4.94 F31S36502E $7.51
5 micron F31R36817E 4.00 F31S36501E 5.73
10 micron F31R36552E 4.00 F31S36503E 5.73
25 micron F31R36596E 4.00 F31S36412E 5.73
50 micron F31R36589E 4.00 F31S36500E 5.73
100 micron F31R36551E 4.00 F31S36505E 5.73
200 micron F3AB00319E 4.00 F3AB00222E 5.73
* Packed 50 per master carton †Packed 30 per master carton
 Size Single Length* Price/Bag Double Length† Price/Bag
1 micron F3AB00013 $4.84 F31B36372 $7.04
5 micron F3AB00157 3.92 F31B37455 5.48
10 micron F3AB00019 3.92 F3AA01434 5.48
25 micron F3AB00020 3.92 F3AB00002 5.48
50 micron F3AB00014 3.92 F3AA00160 5.48
100 micron F31A37288 3.92 F3AA01128 5.48
200 micron F3AB00103 3.92 F3AB00057 5.48
* Packed 50 per master carton †1 and 200 micron: 30 per carton;
5, 10, 25, 50, 100 micron: 50 per carton
 Size Single Length* Price/Bag Double Length† Price/Bag
150 micron F3AB00170E $7.47 F3AB00177E $10.97
400 micron F3AB00173E 7.47 F3AB00180E 10.97
600 micron F3AB00174E 6.38 F3AB00181E 9.88
800 micron F3AB00175E 6.38 F3AB00182E 9.88
* Packed 50 per master carton †Packed 30 per master carton
Polypropylene Felt – Welded Construction
Welded Construction with PPL Plastic Collar SENTINEL.®
Polypropylene Felt – Sewn Construction
Sewn Construction with PPL Snap Ring.
Polypropylene Monofilament – Sewn Construction
Sewn Construction with PPL Snap Ring.
Filter Bags
Sold only in master carton quantities.
From Only
$
400
Starting At
$
297
SENTINEL® RING FILTER BAG SEAL
The patented SENTINEL® ring is your assurance
of a bypass-free filtration system.
Combined with fully welded media construction,
the SENTINEL® ring assures that every
drop of liquid is filtered with no bypass. The
SENTINEL® ring is available in 4" and 7"
diameters.
SENTINEL® RING MATERIALS:
Polypropylene • Polyester • Santoprene
FABRIC MATERIALS:
Polypropylene • Extended life polypropylene
• FDA polypropylene • FDA extended life
polypropylene • Polyester • Extended life polyester
• FDA polyester • FDA extended life polyThe
SENTINEL® collar features
a super strong welded
seam that stands up to the
most aggressive applications.
Handles on SENTINEL®
ring bag remain above
fluid level for easy
removal.
Filter bag with SENTINEL®
ring fits perfectly inside filter
vessel.
Welded Construction Filter Bags ester • Meltblown polypropylene • Meltblown
polyester • Multilayer meltblown polypropylene.
MICRON RATINGS:
1, 5,10, 25, 50, 75,100, 200.
Case Quantities Only
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 82
82_82 3/30/14 11:23 AM Page 82
Tanks
“Heavy Duty” Molded Cylindrical
Tanks with Covers
“Economy” HDPE Tanks with Covers
These HDPE tanks come complete with a PP needle-type
spigot, making them excellent for chemical dispensing.
To ensure strength and leak-free operation, Norton
welds a mounting boss onto the tank, then installs the
spigot. Available in both heavy- and light- weight
versions, in sizes from 5 to 55 gallons.
Tanks with Spigot for Easy Dispensing
19009 and 19010 Stands for Cy lin dri cal Tanks
Elevated Tank Stands – Heavy-duty braced steel stands. Lifts flat-bottom
tanks 22 inches from floor. With 8-in. center hole for drains, cutout on rim
for fittings. Chemical-resistant polyurethane paint.
Capacity O.D. x Wall
 Gallons Item # Depth, in. Thickness Price
 5 54100-0005 11 x 15 3
⁄32 $49.73
 71
⁄2 54100-0007 12 x 18 3
⁄32 67.61
 10 54100-0010 13 x 20 3
⁄32 69.13
 15 54100-0015 13 x 27 3
⁄32 86.64
 30 54100-0030 18 x 30 3
⁄32 135.89
 55 54100-0055 22 x 36 3
⁄32 187.42
Capacity, Gallons 5 7.5 10 15 30 55 80 100 150 200 275 360 500 1000
Calibration, Gallons/Liters .5/2 .5/* 1/* 1/4 2.5/10 2.5/10 5/20 5/20 10/40 25/200 25/100 25/100 25/100 25/100
Approximate O.D. x Depth, inches 11 x 15 12 x 18 13 x 20 13 x 27 18 x 30 22 x 36 24 x 48 28 x 44 31 x 49 35 x 51 42 x 49 48 x 49 53 x 62 66 x 72
Approximate Wall Thickness 3
⁄16 3
⁄16 3
⁄16 3
⁄16 3
⁄16 1
⁄4 1
⁄4 1
⁄4 1
⁄4 1
⁄4 1
⁄4 1
⁄4 5
⁄16 5
⁄16
* 71
⁄2 and 10 gallon cylindrical tanks do not have liter calibrations.
NOTES: 1) Tanks of 55-gallon capacity and above have spoked-bottom design. Others have raised center for complete drainage. 2) 1000 gal. cover is sloped and has flats for installation fittings.
 Material HDPE XLPE Polypropylene
 Capacity Item # Price Item # Price Item # Price
 5 11100-0005 $52.38 11300-0005 $66.15 11200-0005 $90.73
 7.5 11100-0007 71.02 11300-0007 112.96 11200-0007 109.12
 10 11100-0010 72.76 11300-0010 117.99 11200-0010 116.00
 15 11100-0015 91.21 11300-0015 131.45 11200-0015 134.11
 30 11100-0030 143.22 11300-0030 195.60 11200-0030 204.67
 55 11100-0055 197.30 11300-0055 277.05 11200-0055 269.92
 80 11100-0080 404.96 11300-0080 513.73 11200-0080 569.71
 100 11100-0100 429.67 11300-0100 635.43 11200-0100 653.92
 150 11100-0150 584.33 11300-0150 696.53 11200-0150 784.87
 200 11100-0200 634.23 11300-0200 734.72 11200-0200 826.62
 275 11100-0275 843.63 11300-0275 943.67 11200-0275 1,091.31
 360 11100-0360 1,026.81 11300-0360 1,154.29 11200-0360 1,344.63
 500 11100-0500 1,455.11 NA NA NA NA
 1000 11100-1000 2,436.33 NA NA NA NA
Capacity Heavyweight Lightweight
Gallons Item # Price Item # Price
 5 11102-0005 $82.35 54102-0005 $78.25
 71
⁄2 11102-0007 100.69 54102-0007 94.89
 10 11102-0010 103.40 54102-0010 97.38
 15 11102-0015 124.78 54102-0015 118.52
 30 11102-0030 176.39 54102-0030 167.64
 55 11102-0055 232.12 54102-0055 219.78
 Stand / Agitator Support LIGHTNIN Mixer
Capacity w/o Agitator Support w/ Agitator Support Mixer Mixer Horse Impeller Shaft Impeller Mixer Mixer
 Gallons Item # Price Item # Price Item # Drive Power RPM D x L In Dia. In Height In Price
 30 190090030 $491.10 190100030 $666.99 63100-0030 Direct 1
⁄4 1750 0.63 x 36 3.6 13 $1,483.48
 55 190090055 542.29 190100055 731.48 63100-0055 Direct 1
⁄4 1750 0.63 x 36 3.6 13 1,483.48
 80 190090080 708.74 190100080 925.17 63100-0080 Direct 1
⁄4 1750 0.63 x 48 3.6 251
⁄2 1,795.36
 100 190090100 651.41 190100100 866.65 63100-0100 Direct 1
⁄4 1750 0.63 x 48 3.6 251
⁄2 1,885.13
 150 190090150 725.51 190100150 954.61 63100-0150 Direct 1
⁄4 1750 0.63 x 48 3.6 251
⁄2 1,885.13
 200 190090200 846.22 190100200 1,073.28 63100-0200 Gear 1
⁄4 350 0.75 x 48 11.2 291
⁄4 2,633.08
 275 190090275 1,161.41 190100275 1,396.90 63100-0275 Gear 1
⁄4 350 0.75 x 48 11.2 291
⁄4 2,633.08
 360 190090360 1,245.62 190100360 1,473.03 63100-0360 Gear 1
⁄4 280 0.75 x 48 13.6 291
⁄4 2,633.08
 500 190090500 1,311.24 190100500 1,476.01 63100-0500 Gear 1
⁄4 280 0.75 x 60 13.6 291
⁄4 3,093.90
 1000 190091000 3,793.81 190101000 4,260.52 63100-1000 Gear 1
⁄2 280 0.75 x 70 15.1 291
⁄4 4,290.42
NOTE: 1) To order cylindrical tank stand with agitator support, specify part number 19010 and appropriate size code. Special modifications such as height changes
available on request. 2) Add mixer height to agitator support dimension for overall height.
Designed for less demanding applications where
cost is a critical factor.
Quick Spec
n Continuous service; 150°F/65°C
(HDPE, XLPE) 220°F/104°C (PP)
n Tough, chemical resistant for prolonged
storage and mixing of acids,
caustics and many other chemicals
n Good impact and abrasion resistance
n Smooth, easy-to-clean finish
n Resin complies with U.S. Food & Drug
Admin regulation 177.1520 (HDPE only)
n Installed fittings available
Quick Spec
n 8-in. hole for drains n 275-gal. and larger stands have six legs
n Rim has 51
⁄2 in. cutout for fitting
n Available with agitator supports
n Fit most Norton cylindrical tanks, including those with FRP casings
n Heavy-duty braced steel stands support tank with full liquid load
n Polyurethane coating: more chemical-resistant than most industrial paints
n For additional dimensions consult sales office
From Only
$
4854
As Low As
$
5112
n Motors - Precision-matched to LIGHTNIN
mixers. Direct drive or gear drive, depending
on tank size. Chemical-resistant housings,
1
⁄4-
1
⁄2 hp. Pre-engineered to applicable SaintGobain
tanks and stands. Totally enclosed.
n Mounts-LIGHTNIN mixers clamp securely to
steel support stands.
n Mixer Supports - Welded steel with
chemical-resistant polyurethane paint. Presized
for proper mixer elevation. Integral
part of stand for security and rigidity.
n Impellers - Cast 316 stainless steel
impellers are supplied on all mixers. Mixer
packages are supplied with one impeller.
n Shafts - All shafts are concentric, centerless
ground, stainless steel.
AVAILABLE OPTIONS
n Explosion-proof motors
n LIGHTNIN mixers can be supplied with air
motors for use in flammable or explosionproof
environment.
n Air motors operate using compressed air
and require no electricity. These mixers
provide an inherent variable-speed feature
by merely adjusting your air-control valve
and cannot overload.
n Tachometers for mixers larger than 55 gallons
n Special PVDF and PTFE shafts and impeller
coatings
LIGHTNIN MIXER FEATURES
See a larger selection of
mixers and tank stands
on pages 95 & 96.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 83
83_83 3/30/14 11:36 AM Page 83
Cross-Linked High-Density
Polyethylene Large Rectangular
Tanks with Covers
High-Density Polyethylene & Cross-Linked
Polyethylene Tanks with Covers
Item # Cap. Gal. L x W x D Wall Thick. Price
12300-0006 30 30 x 24 x 12 7
⁄32 $373.17
12300-0011 50 48 x 24 x 12 7
⁄32 492.76
12300-0016 50 30 x 24 x 18 7
⁄32 465.50
12300-0023 75 48 x 24 x 18 7
⁄32 534.75
12300-0025 60 24 x 24 x 24 7
⁄32 475.56
12300-0031 70 30 x 24 x 24 7
⁄32 498.79
12300-0036 105 48 x 24 x 24 7
⁄32 606.25
12300-0041 40 18 x 18 x 30 7
⁄32 371.87
12300-0046 55 24 x 18 x 30 7
⁄32 457.14
12300-0051 85 30 x 24 x 30 7
⁄32 537.26
12300-0055 115 30 x 30 x 30 7
⁄32 689.24
12300-0061 135 48 x 24 x 30 7
⁄32 706.14
12300-0067 220 44 x 36 x 33 5
⁄16 1,395.92
12300-0071 250 50 x 36 x 33 5
⁄16 1,609.09
12300-0076 105 30 x 24 x 36 7
⁄32 698.09
12300-0082 185 36 x 36 x 36 7
⁄32 872.43
Other sizes available, consult sales office.
Webb tech tip
FRP (Fiberglass Reinforced Polyester) support casings should be used with rectangular
tanks at elevated temperatures, with high specific gravity liquids or having any dimensions greater
than 18 inches. These casings are steel reinforced, chemical resistant, and maintenance free.
Tanks
Completely encapsulated with PFA and PTFE, Polytetra electric
heaters are able to with stand even the most aggressive
chemicals over an extend period of time. Manufactured using
stainless steel as the conductor and seamlessly sheathed in PFA.
The entire unit isn’t adversely effected by harsh chemicals or
elevated temperature.
Polytetra electric heaters are available in many standard
models and may also be customized for any installation. Call
an Webb Specialist with any questions you may have.
Polytetra Electric Heaters
 Item # Watt Surface Load Volt/ Phase Price
 810815600 3000W 2.2w/cm^2 600/3 $1,417.00
 810830200 3000W 2.2w/cm^2 230/1 1,417.00
 810830600 3000W 2.2w/cm^2 600/3 1,417.00
Approx 12"w x 40"h
 Item # Watt Surface Load Volt/ Phase Price
 890060200 6000W 2.2w/cm^2 230/1 $872.00
 890060480 6000W 2.2w/cm^2 480/3 872.00
 890030200 3000W 2.2w/cm^2 230/1 872.00
 890030480 3000W 2.2w/cm^2 480/3 872.00
 890010200 1000W 2.2w/cm^2 230/1 872.00
 890010480 1000W 2.2w/cm^2 480/3 872.00
Approx Ø4" x < 20"L
Round PFA Encapsulated Electric Heater - 6.5' cable
Flat PFA Encapsulated Electric Heater - 5' cable
Cable
sheathed
in PFA
Welded
water
tight
PFA
tubing
 Item # Description HDPE ( 14100- ) XLPE ( 14300- ) PP ( 14200- )
( xxxxx )-0002 2 Gal. 8 x 8 x 8"H, 5
⁄32" Wall $59.35 $73.29 $80.39
( xxxxx )-0005 6 Gal. 14 x 10 x 10"H, 5
⁄32" Wall 66.04 88.76 96.81
( xxxxx )-0010 7 Gal. 12 x 12 x 12"H, 5
⁄32" Wall 75.37 89.21 97.68
( xxxxx )-0015 11 Gal. 18 x 12 x 12"H, 5
⁄32" Wall 101.69 136.83 160.11
( xxxxx )-0020 15 Gal. 24 x 12 x 12"H, 5
⁄32" Wall 142.17 193.45 223.07
( xxxxx )-0035 11 Gal. 12 x 12 x 18"H, 5
⁄32" Wall 127.40 150.84
( xxxxx )-0040 15 Gal. 18 x 12 x 18"H, 5
⁄32" Wall 138.79 181.63 185.69
( xxxxx )-0050 60 Gal. 18 x 12 x 18"H, 5
⁄32" Wall 299.51 442.78 506.18
( xxxxx )-0060 22 Gal. 18 x 12 x 24"H, 5
⁄32" Wall 206.59 255.86 294.03
( xxxxx )-0062 30 Gal. 24 x 12 x 24"H, 5
⁄32" Wall 223.08 339.04
( xxxxx )-0065 45 Gal. 24 x 18 x 24"H, 5
⁄32" Wall 252.76 345.12 358.47
( xxxxx )-0070 90 Gal. 36 x 24 x 24"H, 3
⁄16" Wall 428.58 632.06 635.02
( xxxxx )-0075 12 Gal. 24 x 4 x 30"H, 3
⁄16" Wall 202.67 318.31
( xxxxx )-0080 25 Gal. 24 x 8 x 30"H, 3
⁄16" Wall 224.44 328.34
( xxxxx )-0090 90 Gal. 24 x 24 x 36"H, 1
⁄4" Wall 490.35 733.74
( xxxxx )-0091 14 Gal. 30 x 30 x 36"H, 1
⁄4" Wall 591.61 766.59 872.29
Rectangular Tank with Cover
Other sizes available, consult sales office.
A control panel regulates temperature measured by high level
and maintenance level thermostats set to desired limits. Using
different heat tracing elements, temperature can be maintained
at any point above 50°F, 80°F or 100°F over the lowest
ambient temperature to which the tank is subjected. Heat
tracing and insulation are available:
Vertical tanks from 300 to 12,000 gallons capacity
Conical bottom tanks from 1,575 to 4,200 gallons
Horizontal cylindrical tanks from 500 to 2,500 gallons
Call an Webb Specialist For Details.
Tank Heat Tracing & Insulation
NEW
Pricing Starting At
$
147900
Quick Spec
HDPE High Density Polyethylene
n Continuous service to 140°F
n Good abrasion and impact resistance
n May be welded
n Wide range of uses includes plating, photo.........
XLPE Cross-Link Polyethylene
n Continuous service to 140°F
n Excellent abrasion and impact resistance
n Can not be welded
n Wide range of use in chemical processing, storing boiler
treatment solutions, and water and wastewater treatment
n Continuous
service
to 140°F
n Most durable
polyethylene
tanks available
n Excellent stress-crack
resistance
n Exceptional impact resistance
n Straight walls protect plating equipment
n PVC and PP bulkhead
fittings available
n Other sizes available
NOTE: XLPE tanks cannot be welded
From Only
$
5935
Quick Spec
PP Polypropylene
n Service to 220°F
n Excellent stress-crack resistance
n Wide range of uses includes plating, silicon wafer processing,
high-purity water storage. For continuous service
at elevated temperatures or storage of high specific
gravity materials, see 15200 Series with FRP casing.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 84
84_84 3/30/14 11:40 AM Page 84
High-Density Polyethylene Cone Bottom Tanks
with Covers
Stands for Cone Bottom Tanks
Specify for complete drainage or better solids dispersion. Stands lift tank bottoms 18 in.
off floor, have cutout for fitting. Chemical-resistant polyurethane paint.
FLOATING COVERS
Maintain continuous contact as liquid
level changes; reduce evaporation,
fumes and surface oxidation. Very good
chemical resistance. Fit only straight -wall
cylindrical tanks (Series 11000, 18000,
19000, and 54000). Resin complies with
FDA Reg. 177.1520.
INSTALLED HINGES
Flexible PP hinge provides access to
cylindrical tanks without completely
removing cover. The cover is cut to your
specifications, then the hinge is installed
with stainless steel rivets. Hinge length
and exact location must be listed separately
on your purchase order.
Cylindrical Tank Accessories
Elevated stands for
cone bottom tanks.
HDPE Floating Covers for Cylindrical Tanks, Thickness
Fits These Diameter Floating Cover
Size Tanks (in.) Item # Thickness (in.) Price
5 Gals. 103
⁄8 54104-0011 1
⁄16 $33.45
7.5 Gals. 12 54104-0012 1
⁄16 37.60
10 Gals. 123
⁄4 54104-0013 1
⁄16 41.89
15 Gals. 131
⁄8 54104-0014 1
⁄16 46.06
30 Gals. 173
⁄4 54104-0018 3
⁄32 47.22
55 Gals. 223
⁄8 54104-0022 3
⁄32 59.22
Installed Hinges for Cylindrical Tank Covers
Fits These NALGENE Hinge
Cylindrical Tanks Item # Length (in.) Price
5 to 80 Gals. 87500-0024 up to 24 $286.10
100 to 200 Gals. 87500-2536 25 to 36 425.33
275 & 360 Gals. 87500-3748 37 to 48 567.99
500 Gals. 87500-4960 49 to 60 715.99
Hinges for rectangular tanks are also available.
Quick Spec
n Heavily-braced steel
n Polyurethane coating helps prevent
corrosion–more chemical resistant
than most industrial paints
n All sizes have 8-inch hole in bottom
for fittings
n Stands for 250-gallon and larger
tanks have six legs
n Available with agitator supports for
mounting mixing equipment
n Accommodate tanks with FRP casings
From Only
$
14556
These tanks require
elevated stands.
See stands at right.
Quick Spec
n 30° cone angle (18° for 400 gallons,
45° for 500 gallons)
n Complete drainage
n Better dispersal of solids
n Easy installation of welded or bulkhead
fittings
n Require metal stands
n HDPE and polypropylene resins comply
with 21 CFR Reg. 177.1520 PVDF 21
CFR 177.2510
n Clearance from the floor to bottom of
the tank is 18 inches (12 inches on
10-gallon tank)
WARNING: Never use FRP casings alone as a tank. Always use a liner. Always use an FRP casing with
your tank for continuous service at elevated temperatures, or storage of high specific-gravity materials.
Tanks
Stand with
Stand Agitator Bracket
Size Description ( 17109- ) ( 17110- )
( xxxxx )-0010 10 Gal Stand For Conical Bottom Tank $568.12 –.....
( xxxxx )-0030 30 Gal Stand For Conical Bottom Tank 632.62 $750.60
( xxxxx )-0055 55 Gal Stand For Conical Bottom Tank 724.92 854.76
( xxxxx )-0100 100 Gal Stand For Conical Bottom Tank 914.45 1,071.94
( xxxxx )-0150 150 Gal Stand For Conical Bottom Tank 1,080.82 1,218.82
( xxxxx )-0250 250 Gal Stand For Conical Bottom Tank 1,286.21 1,471.15
( xxxxx )-0400 400 Gal Stand For Conical Bottom Tank 1,446.75 1,515.51
( xxxxx )-0500 500 Gal Stand For Conical Bottom Tank 1,607.12 1,910.65
 Description HDPE PP XLPE PVDF
Size (Calibration Increments Gallons & liters) ( 16120- ) ( 16220- ) ( 16320- ) ( 16520- )
(xxxxx)-0010 10 Gal. 131
⁄4 x 23" 5
⁄32" Wall (1/5) $145.56 $201.57 $194.65 $651.42
(xxxxx)-0030 30 Gal. 18 x 35" 3
⁄32" Wall (2.5/10) 167.27 283.25 225.41 1,119.19
(xxxxx)-0055 55 Gal. 22 x 44" 3
⁄16" Wall (2.5/10) 231.55 438.98 304.03 1,791.15
(xxxxx)-0100 100 Gal. 32 x 38" 1
⁄4" Wall (5/20) 392.91 721.36 520.51 3,213.55
(xxxxx)-0150 150 Gal. 32 x 57" 1
⁄4" Wall (5/50) 494.62 823.79 639.87 3,249.26
(xxxxx)-0250 250 Gal. 43 x 54" 5
⁄16" Wall (25/100) 635.34 1,176.04 797.74 4,522.48
(xxxxx)-0400 400 Gal. 48 x 60" 5
⁄16" Wall (25/100) 907.56 1,358.11 1,135.09 –......
(xxxxx)-0500 500 Gal. 53 x 80" 5
⁄16" Wall (25/100) 1,796.77 –...... 2,213.41 –......
HDPE-High Density Polyethylene, PP-Polypropylene, XLPE-Crosslink Polyethylene
See a larger selection of mixers and tank stands on pages 95 & 96.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 85
85_85 3/30/14 11:41 AM Page 85
Assmann Plastic Horizontal Leg Tanks provide a
new cost-efficient design which simplifies installation and
saves money!
Horizontal Leg Tanks Vertical Storage Tanks
Dimensions Weight (lb) Access Price
Capacity (Inches) Crosslinked & Linear Polyethylene Opening Linear Crosslink
Item # (U.S. Gal.) Diameter Height 1.5 Sp. Gravity 1.9 Sp. Gravity (Inches) 1.5 1.9 1.5 1.9
ICT0065 65 23 43 25 28 6 NA $259.83 NA $276.65
ICT0080 80 24 49 30 35 16 NA 329.16 NA 346.44
ICT0140 140 29 58 60 65 16 NA 519.16 NA 539.59
ICT0300 300 35 35 85 85 16 NA 720.28 NA 801.28
ACT0550 550 69 40 120 120 16 NA 959.54 NA 1065.47
ICT0550 550 48 82 120 130 16 NA 959.54 NA 1065.47
IFT0550 550 48 79 120 130 16 NA 959.54 NA 1065.47
ICT0700 700 69 48 130 150 16 NA 959.54 $1,212.16 1,136.50
ICT0850 850 48 120 230 250 16 $1,092.17 1,318.43 1,300.26 1,450.53
IFT0950 950 64 81 190 205 16 1,173.67 1,318.43 1,612.71 1,464.24
ICT1000 1000 64 84 190 205 16 1,173.67 1,318.43 1,619.87 1,464.24
ICT1100 1100 86 55 190 220 16 1,173.67 1,869.23 1,619.87 1,464.24
ACT1500 1500 86 73 250 320 16 1,507.85 1,426.41 1,908.68 1,897.90
ICT1500 1500 34 121 320 415 16 1,688.54 1,461.16 2,125.36 2,381.40
ICT1850 1850 96 78 350 400 16 1,881.70 2,461.16 2,248.99 2,734.07
ICT2000 2000 86 100 335 445 16 2,004.54 2,461.16 2,776.65 2,734.07
ICT2050 2050 64 164 500 540 16 2,669.27 3,293.59 2,535.85 3,571.48
ICT2400 2400 96 95 450 620 16 2,587.02 3,268.67 2,535.85 3,547.80
ICT2500 2500 86 114 450 620 16 2,587.02 3,268.67 3,425.16 3,547.80
ICT2900 2900 96 111 620 800 16 3,286.11 4,225.71 3,687.52 4,587.10
ICT3000 3000 90 122 620 800 16 3,343.66 4,225.71 3,687.52 4,587.10
ICT4000 4000 90 162 850 1100 16 4,625.73 4,011.93 4,628.98 6,857.59
ICT4200 4200 96 152 850 1100 16 4,625.73 6,172.20 4,889.16 6,857.59
ICT5200 5200 105 150 1050 1400 24* 6,796.53 8,157.33 7,156.22 9,030.88
ICT5500 5500 119 141 1350 1600 24* 4,774.95 8,561.08 8,280.16 9,236.49
ICT5600 5600 96 196 1500 1750 24* 7,880.68 9,200.35 8,683.17 10,184.83
ICT6500 6500 105 193 1600 1900 24* 10,179.88 13,279.02 9,888.16 14,459.12
ICT6510 6510 119 156 1600 1850 24* 10,179.88 10,814.12 9,915.61 11,732.54
ICT8000 8000 143 142 1850 2325 24* 12,046.57 14,933.91 12,800.16 16,376.96
ICT10000 10000 143 173 3000 3400 24* 15,709.01 18,087.93 15,980.68 19,706.68
ICT12000 12000 143 196 3800 4400 24* 20,115.42 23,232.05 19,033.66 25,506.28
*All 24" manway access covers are hinged.
Cylindrical horizontal storage tanks have molded-in legs
requiring no steel cradle support. Materials and features
are similar to vertical and conical tanks.
Assmann vertical tanks are rotationally molded from your
choice of high density crosslinked polyethylene or FDA compliant
low density linear polyethylene. They are translucent
with gallon markers and access openings molded-in. Either is
more corrosion and chemical resistant than fiberglass/thermoset
resin materials, stainless or mild steel. Tanks are onepiece
seamless molded units, designed with wall thickness
conforming to ASTM D-1998-93 standards for liquid storage and have narrow diameter for spacesaving in-plant use. They possess
excellent low temperature impact resistance and are U.V. stabilized. They are available in natural white or optional blue,
green, yellow or black colors. They can be equipped with accessories to fit your specifications.
From Only
$
396 23
 Tank size (gal.) Item # Price
 Linear
 55 IHFS55 $396.23
 110 IHFS100 495.97
 200 IHFS200 662.96
 300 IHFS300 827.45
 500 IHFS500 990.69
 Crosslink
 55 IHFS55XLPE 413.73
 110 IHFS100XLPE 518.40
 200 IHFS200XLPE 690.37
 *300 IHFS300XLPE 863.59
 500 IHFS500XLPE 1,030.57
*Pictured
Assmann Small Double Wall Day Tanks
Double Wall Tank Specifications
 Capacity Dimensions (In.) Std. Access Linear Crosslink 1.9
Item # Gallons Liters Diameter Height Opening Price Price
*IMT0020 20 75 261
⁄8 161
⁄8 7 $224.31 $235.53
*IMT0040 40 151 261
⁄8 273
⁄4 7 417.76 438.65
*IMT0065 65 246 261
⁄8 427
⁄16 7 624.27 655.48
*IMT0085 85 321 341
⁄2 371
⁄2 7 681.24 715.30
*IMT0120 120 454 341
⁄2 501
⁄4 7 880.62 924.65
*IMT0150 150 568 47 44 7/16 855.75 990.70
*IMT0165 165 624 341
⁄2 651
⁄16 7 968.45 1,016.87
*IMT0250 250 946 47 61 7/16 1,059.83 1,254.88
*Specifications pertain to small double wall tank models only.
Model number availability and individual specifications subject to change without notice. All specifications
approximate. All wall thicknesses conform to ASTM D-1998 standards. Consult factory on specific uses for
Assmann Double Wall Tanks.
THESE UNIQUE TANKS ARE BUILT TO LAST!
n Inner tank dome overlaps outer tank sidewall to prevent rainwater, snow, and debris from
entering secondary containment, making system ideal for outdoor storage of chemicals.
n Molded 7" threaded top access opening is standard. This access opening is chemically resistant
and fume tight. Larger access openings available.
n Small footprints of 341
⁄2" & under will fit through standard 36" doorway to allow convenient
system location within tight manufacturing areas.
n Molded in pump shelf is ideal for installing chemical pumps and metering equipment. This
pump shelf is recessed in the top of the tank to contain small chemical spills.
n Molded in sump in the primary tank is located directly below the pump shelf. Suction lines can
be lowered onto the sump area, which will allow for maximum drainage of chemical with top
discharge assemblies.
n Recessed lower fitting flat will allow fittings to penetrate through the secondary containment wall
and into the primary tanks sump. This feature allows full flooded suction for outlet assemblies.
n Interstitial leak detection systems option available.
New
Double Wall
Tank System
New
Double Wall
In Stock In Stock
In Stock In Stock
New Double Wall Tank System provides primary and secondary
containment in one space-saving integral unit.
This system consists of a primary inner tank and secondary containment, with a capacity of
120% of the inner tank, exceeding EPA standards and complies with 40 CFR-264.193.
Tanks
IN STOCK AND READY TO SHIP
See a selection of mixers and tank stands on pages 95 & 96.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 86
86_86 3/30/14 11:42 AM Page 86
Versatile Utility Tanks
 Item # Description Shipping Wt. Price
 27421 Tank Assembly 7 lbs. $152.95
NOTES:
1. Full, flat bottom support required.
2. Maximum solution/ambient temperature 110?F (43?C).
3. Minimum solution/ambient temperature 0?F (-18?C).
4. Not suitable for use with slurries, concentrated organic solvents,
oils and related materials.
 Item # Description Shipping Wt. Price
 27400 Tank Assembly 18 lbs. $356.25
NOTES:
l. Full, flat bottom support required.
2. Maximum solution/ambient temperature 110?F (43?C ).
3. Minimum solution/ambient temperature 0?F (-18?C ).
4. Not suitable for use with slurries, concentrated organic solvents,
oils and related materials.
5. Two fittings are supplied with each tank assembly for connection to
either 3
⁄8" OD or 1
⁄4" OD tubing.
 Item # Description Shipping Wt. Price
26350 Tank Assembly 25 lbs. $291.67
26350-1 Tank w/drilled cover for agitator 25 lbs. 303.97
31591 Adapter flood suction 33.69
NOTES:
1. Full, flat bottom support required.
2. Maximum solution/ambient temperature 110?F (43?C)
3. Minimum solution/ambient temperature 0?F (-18?C)
4. Maximum weight limit for cover 50 Ibs (23 kg)
5. Not suitable for use with concentrated organic solvents, oils and
related materials.
*Cover must be drilled at factory for agitator mounting.
Please indicate your desire for this option when ordering.
 Capacity Weight (lbs.) Wall O.D. x Depth Tank Cover
 Item # Gallons Liters Tank Cover Ins. Ins. Price Price
 TFT0030A 30 110 9 2.5 1
⁄8" 21" x 221
⁄4" $146.00 $54.91
TFT00250A 50 185 12 2.5 1
⁄8" 21" x 383
⁄4" 174.11 54.91
TFT00078 Cover, molded with fill hole and recesses for mounting chemical feeder, 99.05
 liquid level switch and lightweight agitator (for above models only)
Lightweight and economical, these tanks are molded of LPE and are
available in many colors. An industry standard for small volume
chemical feed / mixing applications,
they are offered in 30 and 50 gallon sizes. Specially suited
for use with TFT 0078 molded cover with recesses for mounting
chemical feeder, agitator and liquid level switch.
Tank Assemblies for Metering Pumps
n Ultraviolet resistant, yellow
polyethylene tank
n Molded recesses for mounting of
any LMI Series A, J, or P pump
n Convenient and lightweight,
ships economically
n Large fill hole at top allows
easy replenishing of solution
n Slightly translucent yet rugged design
allows checking solution level at a glance
n Ultraviolet resistant, molded
yellow polyethylene tank
n High rigidity black polyethylene
cover with molded recess
for mounting of pump, agitator*
and liquid level switch
n 5 gallon (20 liter) graduations
n Self supporting, tapered sides
n Suitable for most corrosive and
noncorrosive solutions
n Ultraviolet resistant, yellow
polyethylene tank with recess
for mounting of any LMI Series
A, P, or J pump
n Fitted for mounting of agitator
and liquid level switch
n Provides an economical, all-inone
flooded suction installation.
Less to assemble, less to maintain
n Shutoff valve, discharge tubing
retainer and large upper fill hole
complete this unique design
n 5 gallon graduations. 20 liter graduations
n Suitable for most corrosive and non-corrosive solutions
Tanks
Talk with an Webb Specialist on the comprehensive
line of custom configured thermoplastic
tanks and accessories for the PureWater,
Biopharmaceutical and Hemodialysis markets.
For RO/DI water storage, biopharmaceutical
batch processing, semiconductor manufacturing,
laboratory/hospital use and clinical
analysis, Terracon’s TerraPure®, TerraPure-F®,
TerraPharma™ and Hemodialysis containers
offer the right solutions to your fluid management
problems wrapped up in our custom-configurable
thermoplastic designs. The
designed-in configurability of these products
allows us to customize them to your needs
effectively, quickly and reliably.
They can also be outfitted with stainless
steel (SS) mobile stands, sanitary valves and
other specialty features.
FABRICATION
Custom Designed Fluid Management Solutions for PureWater, Biopharma and Hemodialysis
Quick Spec
n Molded-in calibration scale
n Tapered sides permit nesting for
shipping/storage economy
n Inexpensive
n Special pump mount cover
Optional polyethylene stands,
which may be stacked
2-high, support the primary
tank for gravity feed.
Polyethylene pump shelf supports
most pumps and metering
devices. Optional fiberglass
shelves are available
for pumps and metering
devices totaling 25 pounds
or more.
Chemical Feed Stations
10 Gallon Tank Assembly
MODEL NO. 27421
35 Gallon Tank Assembly
MODEL NO. 27400
50 Gallon Tank Assembly
MODEL NO. 26350-1
Chemical feed stations consist of primary tank, secondary containment and pump shelves. All tanks and containments are
designed for 1.9 specific gravity chemicals. Standard parts listed below are molded from FDA complaint linear polyethylene.
Optional crosslink polyethylene
feed tanks and FRP pump
shelves are available. All
fitting accessories are priced
separately. Call Webb for details.
Webb Price Only
$
15295
1.9 Specific Gravity – Pricing represents ALL linear polyethylene construction.
 Capacity Length Width Height Tank Linear Poly Pump Optional
Model Gallons (In) (In) (In) Stand Feed Tank* Shelf* FRP Shelf Basin
CFS40 40 32 26 38 $117.48 $189.40 $45.56 $218.16 $256.52
CFS60 60 47 32 42 125.86 263.71 45.56 233.74 346.98
CFS80 80 47 32 49 125.86 332.92 45.56 233.74 346.98
CFS140 140 52 38 58 251.72 519.03 45.56 250.52 475.87
CFS175 175 60 43 51 581.35 539.40 98.28 260.11 652.08
CFS200 200 60 43 57 561.26 613.30 98.28 260.11 652.08
CFS250 250 72 43 69 581.35 674.84 98.28 260.11 729.99
CFS300 300 72 43 82 581.35 692.83 98.28 260.11 729.99
CFS550 550 83 64 82 NA 922.98 74.32 327.24 1,147.12
NOTE: The CFS550 Poly Pump Shelf is a triangular corner pump shelf style. All other pump shelf styles are
full across the end of the containment. Refer to individual feed station drawings for details.
*Components for Complete Chemical Station
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 87
87_87 3/30/14 11:44 AM Page 87
Tanks
Assmann Modular Polyethylene Tank Stand
Assmann Corporation now molds modular
polyethylene tank stands for use with the
FDO (Full Drain Outlet) outlet assembly.
These stands will elevate your polyethylene
tank 12” from grade, giving you the ability
to have a full drain tank without pouring
expensive concrete.
ALSO BENEFICIAL –
n 100% chemical resistant and is suitable for
all corrosive environments
n Lightweight modular sections can be easily
disassembled and relocated to a different site
n Corrugated sidewalls for maximum support
n Dovetail joints for interlocking modular
sections together
n Optional wind load anchoring points
n Raises tank bottom for flooded suction
n Can be installed on any suitable flat surface
n Wide range of color choices
Anchor points and
raised castle projections
restrain
lateral movement.
Assmann Corporation of America introduces
the molded in Full Drain Outlet (FDO) assembly
for tanks of 2,500 gallons and larger.
Assmann Molded In Full Drain Outlet PATENT PENDING
 Item # Description Price
 FDOTS96 143" Dia. Tank Stand, 149" OA Dia. x 12" Height $3,254.73
 FDOTS119 119" Dia. Tank Stand, 126" OA Dia. x 12" Height 6,001.93
 FDOTS143 143" Dia. Tank Stand, 104" OA Dia. x 12" Height 7,201.13
Stands are black in color unless otherwise noted when ordered. Pricing does not include required anchors.
 Item # Description Price
 BC450-L19 73" x 73" x 431
⁄2"H 450 gal LLDPE $8,473.56
 BC450-X19 73" x 73" x 431
⁄2"H 450 gal XLPE 9,383.76
Pricing includes primary tank, secondary basin, 11" threaded cap with gasket and 21
⁄2" thick mild steel
epoxy coated grating.
Assmann tested
this stand to over
300,000 lbs. of
crush force.
Open Top Polyethylene Storage Tanks
Industrial Open Top tanks (IOT) are molded from your choice of virgin high density cross-link or
NSF certified linear polyethylene. These flat bottom vertical tanks are molded with a stiffening lip
on the top to give the tank rigidity, and they are equipped with shoe-box style cover. Assmann
open top tank covers have a unique design that allows the lid to be hinged and stay open.
n Molded in upper stiffening lip on tank
n Unique lid design that stays open.
n Uniform thickness
n Optional agitator support stands
n Optional S/S or polyethylene hinge
n Molded in gallon markers
n Typically used as day tanks or mixing vessels
Item # Gallons Diameter (In) Height (In) Weight (lbs) Linear (1.9) Crosslink (1.9)
IOT030 30 18½ 30 18 $120.26 $157.54
IOT040 40 18 38 13 195.36 178.46
IOT070 70 22 45 26 264.14 236.28
IOT090 90 24 48 30 267.81 297.44
IOT150 150 30 48 44 469.58 463.85
IOT210 210 35 48 65 508.10 519.32
IOT300 300 46 59 95 585.14 705.44
IOT400 400 69 32 120 814.79 934.56
IOT680 680 69 48 130 823.53 946.86
IOT1000-N 1000 67.5 72 340 1,891.09 2,181.18
Open Top Tanks for Storage and Transport
DOUBLE WALL
BASE CONTAINER QUICKLY EMPTIES
YOUR REUSABLE IBC CONTAINER
Durable & economical
Assmann BC450 Double
Wall Base Containers
are built to last!
n Rectangular in size, low profile.
n Molded in forklift access for easy placement.
n Double walled base container designed to
hold chemical tote bins for up to 3½ hours.
n Mild steel epoxy coated 2½" thick grating
with 1¼" rungs on center for long lasting
durability.
n Partially sloped bottom for near complete draining from top suction.
n Recessed lower fitting flat for sidewall discharge if required.
n 11" threaded access cap with gasket, recessed into the primary tank dome for protection.
n Equipped with ball valve and chemical transfer hose.
n Saves money on tote rental and storage space.
n Maximum load capacity of 4500 lbs.
 Linear Crosslink
Item # Description Price Price NSF
IRD0040 52 gal Capacity 32" x 26" x 20"h Contains 20"dia $223.59 $244.48
IRD0080 95 gal Capacity 47" x 32" x 20"h Contains 24"dia 301.94 390.75
IRD0140 155 gal Capacity 52" x 38" x 24"h Contains 29"dia 414.78 634.18
IRD0200 200 gal Capacity 571
⁄2" x 45" x 24"h Contains 35"dia 541.19 683.29
IRD0240 240 gal Capacity 60" x 43" x 28"h Contains 35"dia 568.36 780.45
IRD0275 275 gal Capacity 641
⁄2" x 52" x 24"h Contains 42"dia 613.29 829.56
IRD0330 330 gal Capacity 72" x 43" x 31"h Contains 35"dia 636.27 879.71
IRD0375 375 gal Capacity 66" x 66" x 24"h Contains 58"dia 675.97 977.91
Molded in virgin high density crosslink
or FDA compliant linear polyethylene.
Tapered in design for nesting during
shipping and storing. These meet or
exceed EPA requirements for containment
of dangerous chemicals. Capacity
from 52 gallon through 3500 gallons.
Rectangular Secondary Containment Basin
Item # Description Linear Crosslink
IMB120 120 gal. Bulk Tank 40"dia x 30"h 6" Opening $280.65 $297.19
IMB200 200 gal. Bulk Tank 40"dia x 30"h 6" Opening 349.88 372.63
IMB-Pallet Polyethylene Pallet 4"h 244.96 260.97
IMD110 110 gal. Drum Tank 37"dia x 32"h 6" Opening 248.91 264.13
IMD175 175 gal. Drum Tank 37"dia x 45"h 6" Opening 339.49 360.34
Option: FRP pump shelf grating add $189.00.
The Mini Bulk Tank (IMB)
and the Mini Drum Tank
(IMD) are molded in either
high density crosslink polyethylene
or FDA compliant
linear polyethylene. Molded
polyethylene skids are
optional for both IMB
120 and 200 models.
Industrial Mini Bulk & Drum Tank
NEW
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 88
88_88 3/30/14 11:46 AM Page 88
Tanks
Round Horizontal Bulk Storage Tanks
Elliptical Horizontal Bulk Storage Tanks
n Designed for storage and non-DOT
regulated transport.
n Molded-in legs for greater tank stability.
n Designed for storage and
non-DOT regulated transport.
n Molded-in legs for greater
tank stability.
MC Series - Commercial Series - Designed to handle contents that have a maximum specific
gravity of 1.5 at 73° F. Excellent chemical resistance. Resin complies with U.S. Food and
Drug Administration regulation 21 CFR 177.1520 (c) 3.1 and 3.2. Translucent* for visible
content level. Molded in calibrations. Anti-surge baffles molded in on tanks - 1000 gallons
through 2625 gallons.
MA Series - Industrial Series - Designed to handle contents that have a maximum specific
gravity of 1.9 at 73° F. Excellent chemical resistance. Resin complies with U.S. Food and
Drug Administration regulation 21 CFR 177.1520 (c) 3.1 and 3.2. Translucent** for visible
content level. Molded in calibrations. Anti-surge baffles molded in on tanks - 1000 gallons
through 2625 gallons.
 Capacity Size LC Tank LA Tank Bands Bands Bands Vented Std. Fitting
 (gal) Dia. x Lgth. (in) Item # Price Price Required Item # Price Manway Specs
 30 22 x 18 TC2218 $87.44 $105.58 — — — 4"
 35 18 x 34 TA1834 120.43 128.68 Kit — $44.54 5" 1" outlet
 35 20 x 29 N-45223 94.04 — 2 N-60520 23.10 5" Cap 3
⁄4" outlet
 55 23 x 34 N-41873 155.08 — 2 N-61745 32.99 5" Cap 3
⁄4" outlet
 65 23 x 43 N-45191 178.17 — 2 N-61745 32.99 5" Cap 3
⁄4" outlet
 65 24 x 39 TA2439 229.32 250.76 Kit — 52.79 5" 1" outlet
 125 29 x 48 TC2948 259.01 283.76 — — — 8" —
 125 32 x 41 N-40298 290.36 — 2 N-61744 41.25 8" 2" outlet
 125 32 x 40 TN3240 384.39 422.34 Kit — 122.08 8" 1" outlet
 200 38 x 42 TC3842 343.15 354.70 2 — 102.29 16" —
 225 38 x 49 N-40299 415.74 — 2 N-60478 74.24 — 2" outlet
 300 44 x 72 TC4472 828.18 927.16 2 — 102.29 16" —
 325 38 x 68 N-40217 504.83 — 2 N-60478 74.24 16" 2" outlet
 330 38 x 74 N-42923 504.83 — 2 N-60478 74.24 16" 2" outlet
 425 49 x 60 N-42016 597.21 — 2 N-60057 85.79 16" 2" outlet
 525 49 x 71 N-40181 691.25 — 2 N-60057 85.79 16" 2" outlet
 535 48 x 78 TA4878 905.72 1,026.15 Kit — 191.37 16" 2" outlet
 550 54 x 76 TC5476 605.46 757.24 2 — 136.93 16" —
 725 49 x 101 N-40180 1,054.19 — 3 N-60057 85.79 16" 2" outlet
 1025 49 x 139 N-40089 1,440.24 — 4 N-60057 85.79 16" 2" outlet
Capacity Size MC Tank MA Tank LK Skid Bands Bands FOB Band Vented Std. Fitting
 (gal) L x W x H (in) Item # Price Price Price Required Item # Points Price Manway Specs
 335 71 x 48 x 33 N-42339 $527.92 — — 2 N-63546 C,G,M,O,OK,T $74.24 16" 2" outlet
 500 73 x 53 x 42 TC500X 752.29 $838.08 $503.18 — — T — 16" —
 1000 145 x 53 x 45 TC1000 1,247.22 1,390.74 951.91 2 — M,O,U — 16" —
 1035 89 x 79 x 54 N-40191 1,291.76 — — 3 N-60325 M,O 105.58 16" 2" outlet
 1335 126 x 66 x 55 N-42927 1,794.94 — — 3 N-63642 M,O 107.23 16" 2" outlet
 1335 126 x 66 x 55 N-42929 — 2,039.10 — 3 N-63642 C,G,M,O,OK,T 107.23 16" 2" outlet*
 1635 142 x 71 x 58 N-40387 2,312.96 — — 4 N-60586 C,G,M,O,OK,T 110.53 16" 2" outlet
 1635 142 x 71 x 58 N-40388 — 2,629.71 — 4 N-60586 C,G,M,O,OK,T 110.53 16" 2" outlet*
 2635 140 x 90 x 72 N-40547 4,173.88 — — 4 N-60353 C,G,M,O,OK,T 263.96 16" 3" outlet
 2635 140 x 90 x 72 N-40283 — 4,480.74 — 4 N-60353 C,G,M,O,OK,T 263.96 16" 3" outlet*
 N-62097 (G,O) 3135 150 x 88 x 80 N-40686 4,884.93 — — 4
 N-63620 (C,M,OK,TX,U) C,G,M,O,OK,T 290.36 16" 3" outlet
 N-62097 (G,O) 3135 150 x 88 x 80 N-40688 — 5,553.08 — 4
 N-63620 (C,M,OK,TX,U) C,G,M,O,OK,T 290.36 16" 3" outlet*
 4035 192 x 92 x 75 N-41267 7,824.80 — — 4 N-62832 C,M,O,TX 336.55 16" 3" outlet w/ 2" reducer
 4035 192 x 92 x 75 N-41269 — 8,893.84 — 4 N-62832 C,M,O,TX 336.55 16" 3" outlet w/ 2" reducer*
FOB Points: C = Hanford, CA; G = Griffin, GA; M = St. Bonifacius, MN; O = Lancaster, OH; OK = Shawnee, OK; T = Arlington, TN; TX = Fairfield, TX; U = Tooele, UT * Blue Tank
Large capacity horizontal tanks that are UV stabilized for outdoor use.
Manufactured from linear polyethylene in one piece, seamless construction.
Vertical Bulk Storage Tanks
Manufactured from linear polyethylene in one piece, seamless construction,
this tank series is designed for either indoor or outdoor applications.
Flat bottom design provides for easy and cost efficient installation.
UV stabilized for outdoor use.
LC Series - Commercial Series - Designed to handle contents that have a maximum specific
gravity of 1.5 at 73° F. Excellent impact and chemical resistance. Resin complies with U.S.
Food and Drug Administration regulation 21 CFR 177.1520 (c) 3.1 and 3.2. Translucent* for
visible content level. Molded in calibrations. Anti-surge baffles molded in on tanks - 525 gallons
through 1625 gallons. Most sizes are available with steel platforms and straps for
mounting on vehicles.
LA Series - Industrial Series - Designed to handle contents that have a maximum specific
gravity of 1.9 at 73° F. Excellent impact and chemical resistance. Resin complies with U.S.
Food and Drug Administration regulation 21 CFR 177.1520 (c) 3.1 and 3.2. Translucent* for
visible content level. Molded in calibrations. Anti-surge baffles molded in on tanks - 525 gallons
through 1625 gallons. Most sizes are available with steel platforms and straps for
mounting on vehicles.
**The degree of translucency
varies with wall thickness and
tank color.
*The degree of translucency varies with wall
thickness and tank color.
IA Series - Industrial Series - Designed to handle contents that have
a maximum specific gravity of 1.9 at 73° F. Translucent* for visible content
level.
IC Series - Commercial Series - Designed to handle contents that
have a maximum specific gravity of 1.5 at 73° F. Translucent* for visible
content level.
*The degree of translucency varies with wall thickness and tank color.
Range in sizes from 20 through 15,000 gallons.
Capacity Size
 (gal) Dia. x H (in) Item # M/Way IC Price IA Price
20 16 x 28 TA1628 8" – $81.54
100 23 x 64 TC2364 8" $186.00 207.13
250 35 x 68 TC3568 8" 387.80 427.70
500 47 x 72 TC4772 16" 780.00 936.93
1,000 69 x 74 TC6974 16" 823.09 883.13
2,000 90 x 83 TA9083 16" 2,061.54 2,463.18
4,000 95 x 140 TC4000 16" 3,972.30 4,286.16
10,000 141 x 160 N-43128 16" 9,704.63 –
10,000 141 x 160 N-43130 16" – 11,029.23
15,000 141 x 244 N-41334 16" 20,749.23 –
15,000 141 x 244 N-41336 16" – 23,578.46
20,000 165 x 242 N-43825 22" 30,956.92 –
20,000 165 x 242 N-43827 22" – 35,184.62
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 89
89_89 3/30/14 11:47 AM Page 89
Spill Containment Pallets
Security Spill
Containment
Containment
Basins
Quick Spec
n Designed so that hazardous spills can be safely contained
in pallet basin – not on your floors or in the soil.
n Pallets hold either two or four 55 gallon drums.
n Convenient forklift entry.
n Designed for in-plant use, not for transport.
 Item # Description L x W x H (in) Price
 SP1003HA4 4 Drum 54 x 54 x 14 $541.54
 SP1006HA2 2 Drum 55 x 28 x 17 376.93
Price includes drain plug.
Quick Spec
n Excellent chemical and impact resistance.
n Capacities listed are the maximum for the containment
basin. The containment basin capacity must be at least
10% greater than that of the primary tank.
n Check local regulations.
 Item # Capacity (gal) Dia. x H (in) Price
 TC6433OA 385 64 x 33* $592.31
 TC6646OA 675 66 x 46 852.31
 TC8230OA 675 82 x 30 852.30
 TC8638OA 950 64 x 70 953.85
 TC6470OA 950 86 x 38* 953.85
 TC8446OA 1000 84 x 46 960.00
 TC8748OA 1100 87 x 48 963.08
 727266OA 1150 72 x 72 x 66 rect. 1,593.85
 969640OA 1250 96 x 96 x 40 tapered † 1,889.23
 969644OA 1415 96 x 96 x 44 tapered † 1,930.77
 848448OA 1450 84 x 84 x 48 rect. 2,083.08
 TC8660OA 1500 86 x 60* 1,740.01
 848460OA 1800 84 x 84 x 60 rect. 2,187.70
 TC8681OA 2000 86 x 81* 1,884.62
 969662OA 2075 96 x 96 x 62 tapered † 2,829.23
 TC9585OA 2450 95 x 85* 2,970.77
 TC9597OA 2975 95 x 97* 3,558.46
 TC3701OA 3700 102 x 109 3,423.08
 TC4250OA 4250 120 x 87* 4,324.62
 TC4650OA 4650 120 x 97* 5,396.92
 TC4800OA 4800 102 x 137 6,618.46
 TN5000OA 5000 141 x 77** 6,618.46
 TC5700OA 5700 120 x 117* 6,717.70
 TC6800OA 6800 120 x 150* 8,044.62
*Includes internal flange **Includes SS flange natural color.
† Inside bottom dimension is 85 x 85.
Price is for basin only. Basins are supplied in black linear polyethylene.
Available in translucent white, contact sales office.
 Item # Description L x W x H (in) Price
 SP1001HA 2 Drum 32 x 56 x 45 $672.97
 SP1004HA No Cover 32 x 56 x 45 435.39
 Capacity* Size Vented
 Item # (gal) Dia. x H (in) Manway (in) Price
 TC2738DC 50 27 x 38 8 $378.59
 TC3539DC 100 35 x 39 16 583.45
 TC3448DC 150 34 x 48 16 732.52
 TC4152DC 200 41 x 52 16 865.52
 TC5256DC 350 52 x 56 16 1,687.07
 TC5971DC 500 59 x 71 16 1,864.03
 TC7485DC 1000 74 x 85 16 2,651.24
 TC2000DC 2000 86 x 156 16 5,401.16
 TC3000DC 3000 120 x 116 16 6,458.66
 TC4000DC 4000 120 x 165 16 9,501.36
 TC5000DC 5000 120 x 181 16 11,678.56
 TC6000DC 6000 120 x 198 16 15,210.33
*Capacity of the primary tank.
DC Series transition fittings available. Contact sales office.
 Item # Capacity (gal) Size KA Price KB Price
TC114 5 11 x 14 $202.84 $333.08
TC1815 15 18 x 15 448.51 623.28
TC1829 30 18 x 29 502.93 844.26
TC2236 55 22 x 36 623.30 1,113.03
TC2842 100 28 x 42 852.50 1,492.29
TC3148 150 31 x 48 1,249.90 2,011.70
TC3648 200 36 x 48 1,353.78 2,085.92
TC4248 275 42 x 48 1,868.25 3,276.44
TC4848 350 48 x 48 2,038.09 3,423.20
TC5260 500 52 x 60 3,626.02
TC6984 1200 69 x 84 9,346.20
TC7384 1500 73 x 84 12,564.93
TC8484 2000 84 x 84 14,926.22
KA = Polyethylene, KB = Polypropylene
 Capacity Size Vented
 Item # (gal) Dia. x H (in) Manway (in) Price
 TC3541DC 100 35 x 41 – $1,327.69
 TC3449DC 150 34 x 49 – 1,626.16
 TC6440DC 385 64 x 42 16 2,449.23
 TC6608OA Spill Pan 66 x 8 – 383.08
 TC36040C Spill Pan 37 x 4 – 160.01
Quick Spec
n Hinged cover is lockable.
n Forkliftable for easy handling.
n Designed for in-plant use, not for transport.
n Ideal as a portable secondary containment vessel, as a
storage container for absorbents and other emergency
response equipment, or as a drum pumping station.
Quick Spec
n Save valuable floor space.
n Enclosed design prevents rain, snow and debris from
collecting in containment tank.
n Sizes ranging from 50 to 6,000 gallons.
n Denotes New Size: Designed to fit through narrow
doors/openings.
Quick Spec
n Double-wall tank with 110% secondary containment.
n Large 385 gallon capacity.
n Weather resistant and vented with hinged, lockable manway.
n Maintenance free, won’t rust, chip or dent.
n Large sink with debris screen and removable debris strainer.
n Automatic overflow shutoff.
n Oil level monitoring gauge.
n 2”external quick-release drain coupling.
Quick Spec
n Molded one-piece linear polyethylene.
n U.N. certified (#1H1/Y1.3/100) drum.
n Designed to handle with hoists, parrot beaks, forklifts
and hand trucks.
n All drums supplied with 2” and 3
⁄4” NPT plugs.
n Linear polyethylene.
 Item # Capacity (gal) Dia. x H (in) Price
 SH192930 30 193
⁄8 x 293
⁄4 $138.46
 SH233655 55 231
⁄2 x 361
⁄4 176.92
Price includes drain plug.
Closed Head
ShippingDrums 2 & 4 Drum
Pallets
Tanks
100 Gal.
385 Gal.
Oil-Tainer
Double Wall Bulk Storage Tanks
DC Series – Outer containment tank capacity complies with
federal regulation 40CFR-264.193 requirements.
Acid Waste Heavy
Duty Wall Tanks
SERIES KA / KB
One piece molded heavy walled tanks
provide durability under severe conditions.
These tanks have years of proven suitability
in handling tough effluents. Our line of
polyethylene and polypropylene neutralization
tanks are designed to withstand the
heat of neutralization and the corrosive attack of acids, alkalies,
toxics or other types of chemical wastes. These neutralization
tanks are cylindrical and have bolted down and gasketed
covers. All hardware for bolting are stainless steel, gaskets
are neoprene. Tanks can be ordered with inlets, outlets
and vents as specified.
122 gallon
capacity
Custom
Fabrication
Made Quick
& Easy
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 90
90_90 3/30/14 11:48 AM Page 90
Conical Bottom Bulk Storage
Tanks with Polyethylene Support
Stands
Quick Spec
PE – Linear polyethylene tank
PP – Polypropylene tank, FOB CA only
n Greater corrosion resistance.
n Lightweight.
Quick Spec
n Designed for Bio-pharmaceutical, Diagnostic and Dry
Chemical Powder industries.
n Use with sterile and non-sterile liners.
n Rotationally molded from polyethylene.
n Resin complies with FDA regulation 21 CFR177.1520.
n Processing tanks are ready for immediate reuse after
liner removal.
 Item # Capacity (gal) Dia. x H (in) PE Tank PP Tank
 TC1528 10 15 x 28 $176.71 —
 TC1530 15 15 x 30 184.81 $418.05
 TC1840 30 18 x 40 227.77 530.43
 TC2247 55 22 x 47 278.84 706.87
 TC3035 75 30 x 35 337.26 948.44
 TC3048 100 30 x 48 381.78 999.05
 TC4235 125 42 x 35 520.39 —
 TC3175 200 31 x 75 552.00 1,492.39
 TC4257 250 42 x 57 622.52 1,627.25
 TC4270 350 42 x 70 942.69 2,708.33
Polyethylene stands only. Dimensions include stand.
NOTE: Fittings sold separately
 Item # Capacity (gal) Size PE Tank PP Tank
 R180418 6 4 x 18 x 18 $72.32 —
 R240430 12 4 x 24 x 30 172.59 $335.31
 R181830 40 18 x 18 x 30 202.17 445.43
 R123030 45 12 x 30 x 30 221.89 —
 R181836 50 18 x 18 x 36 249.84 —
 R181842 60 18 x 18 x 42 573.63 —
 R183030 70 18 x 30 x 30 323.80 614.72
 R243024 75 24 x 30 x 24 382.97 691.98
 R243624 90 24 x 36 x 24 310.65 498.02
 R183636 100 18 x 36 x 36 1,367.52 2,189.35
 R243630 112 24 x 36 x 30 348.45 769.23
 R244824 120 24 x 48 x 24 378.04 540.76
 R243636 135 24 x 36 x 36 417.49 927.02
 R363630 153 36 x 36 x 30 683.76 —
 R363636 185 36 x 36 x 36 566.57 1,079.88
 R244842 210 24 x 48 x 42 478.30 —
 R244854 270 24 x 48 x 54 1,295.20 —
 R364848 360 36 x 48 x 48 1,520.38 —
 R367236 400 36 x 72 x 36 1,213.01 —
 R367248 540 36 x 72 x 48 1,227.81 —
 R848448 1450 84 x 84 x 48 9,469.10 —
 R848460 1800 84 x 84 x 60 11,305.06 —
Call Webb for details on FRP Encased Polyethylene and Polypropylene.
B Series, D Series FOB CA only. Any tank 18" and larger in height
needs a support frame or FRP.
 Item # Capacity (gal) Dia. x H (in) HA Tank AF Cover
 TC1829 30 18 x 29 $70.76 $16.92
 TC1840 40 18 x 40 169.23 16.92
 TC2236 55 22 x 36 110.76 20.01
 TC2832 85 28 x 32 186.15 33.85
 TC2448 90 24 x 48 206.15 21.54
 TC2842 100 28 x 42 256.92 33.85
 Item # Capacity (gal) Dia. x H (in) HA Tank AF Cover
 TC3148 150 31 x 48 $333.85 $40.01
 TC3648 200 36 x 48 381.54 49.97
 TC4248 275 42 x 48 501.54 61.59
 TC4848 360 48 x 48 586.16 89.24
 TC5260 500 52 x 60 963.23 104.62
Within UPS dimensional limits.
Cone Bottom Tanks with
Polyethylene Support Stands
Pharmaceutical Processing
Tanks
 Capacity Size Capacity PL PF SP
 Item # (gal) Dia. x H (in) Liters Tank Cover Dolly
TC1327 15 13 x 27 56 $70.79 $6.51 $261.67
TC1830 30 18 x 29 114 100.42 17.92 281.00
TC2236 55 22 x 36 208 146.51 22.83 344.22
TC2448 80 24 x 48 303 248.56 26.04 363.53
TC2844 100 28 x 44 380 312.76 39.07 446.26
TC3149 150 31 x 49 568 398.36 40.63 477.68
TC3648 200 36 x 48 760 2,911.97 71.63 –
TC4248 275 42 x 48 1040 3,588.52 91.17 –
TC4848 360 48 x 48 1362 4,199.23 135.50 –
OPTIONS:
n T-304 Stainless Steel Dollies with non-marking swivel casters.
SP Series Dollies available up to 150 Gals.
n One piece PF Series lift off covers for all sizes.
Quick Spec
JPC Series - is designed to handle contents that have a
maximum specific gravity of 1.5 at 73° F.
n Greater corrosion resistance.
n Less maintenance and lighter weight.
 Capacity Size Vented Cone
 Item # (gal) Dia. x H (in) Manway (in) Angle Price
 N-60113 175 42 x 49 16 30° $624.62
 TC3177JP 200 31 x 77 8 30° 564.62
 N-62343 300 49 x 61 16 30° 920.01
 TC3198JP 300 31 x 98 8 30° 720.01
 N-62441 310 43 x 72 16 30° 753.85
 N-40289 500 49 x 87 16 30° 1,149.23
 N-40809 750 73 x 63 16 20° 1,513.85
 N-40359 1050 73 x 86 16 20° 1,612.31
 N-40813 1600* 89 x 94 16 30° 2,303.08
 N-40672 2500* 96 x 116 16 30° 3,303.08
 N-40797 3000* 96 x 134 16 30° 3,593.85
* Also available as a 1.9 S.G. in blue color.
Tanks come with 2" Polypropylene drain fittings with Viton gasket.
Tanks
Brine Tanks
Brine Tanks (right)
 Capacity Length Width Overall Shipping
Item # Cu. Ft. Outside Outside Height Wt. (lbs) Price
BFC30CFA 30 44" 44" 33" 90 $711.05
BFC30CFF (cover) 35 300.42
BFC30SIB* 30 44" 44" 33" 90 799.74
FL446052 62 60" 44" 52" 160 1,271.77
*Smooth interior bottom. Drain fitting available.
Cover: BFC30CFF, 44" L x 44" W.
Quick Spec
BFC MODEL
n 4 Way fork lift entry
n Available with smooth
flat interior bottom for
food applications
n Ideal for the storage and
in-plant transportation
of dry materials
n Nests when empty
n Stack 2 high when
using cover
n Material complies with
U.S. FDA regulation
21CFR 177.1520
FL MODEL
n 2 Way fork lift entry
n Available with bottom
plates for dumping
Bulk Fork
Lift Containers
One piece molded of
rugged polyethylene
for durable service.
A Series - Polyethylene (PE)
n One piece molded-no seams to leak
n Excellent impact and chemical
resistance.
n Resin complies with U.S. Food and
Drug Administration regulation 177.1520 (c) 3.1 and 3.2.
n Translucent for visible contents level.
n Operating temperatures up to 140° F.
B Series - Polypropylene (PP)
n One piece molded-no seams to leak.
n Excellent impact and chemical resistance.
n Resin complies with U.S. Food and Drug Administration
regulation 177.1520 (c) 3.1 and 3.2.
n Translucent for visible contents level.
n Operating temperatures up to 212° F. Not recommended
for impact or low temperature applications
C Series - FRP Encased Polyethylene (PE)
n Designed to completely support our regtangular tanks.
n No maintenance.
n Available with both polyethylene and polypropylene liners
D Series - FRP Encased Polypropylene (PP) –
n Designed to completely support our regtangular tanks.
n No maintenance.
n Available with both polyethylene and polypropylene liners
Rectangular Tanks
HA SERIES
n Black linear polyethylene
n Designed for commercial
water conditioning
equipment
www.fwwebb.com/plastics
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 91
91_91 3/30/14 11:50 AM Page 91
Closed-Head and Open-Head Drums
Big Mouth Econo-Dike Secondary Containment Pallets ® Secondary Containment Pallets
The ECONO-DIKE is truly the
most economical manner in
which to meet the secondary
containment requirement of
40 CFR 264.175.
Industrial strength molded polyethylene pallets
with a unique patented grid pattern drainage
deck captures container spills and leaks of
expensive materials for reuse.
The Super Shipper® line is D.O.T. approved for a list
of materials including corrosives, Class B poisons and
flammables. Available in black, blue, red, yellow, or
green colors at no extra cost. Specify color when
ordering.
n Seamless, one piece polyethylene construction
n Standard 2" and 3
⁄4" NPS plugs on closed-head drums
n FDA approved materials used for these DOT 34 drums
n Standard lever-lock on open head drums
n Rustproof
n Economical
n Lightweight
n Easy to clean
n Low point drainage
n Corrosion resistant
n Choice of many colors
n Molded of rugged
Polyethylene
n Holds two 55 gallon drums
n Ideal for containing most
hazardous materials
Tanks
Drum Dollies Drum Covers
Drum Size Item # Height Diameter Price Item # Height Diameter Price
15 D-17-15 6.5" 16.5" $89.08 DC-15 2" 17.5" $20.36
20 D-18-20 6.5" 18.5" 92.68 DC-20 2" 18.5" 22.29
30 D-20-30 6.5" 20.5" 94.18 DC-30 2" 20.5" 24.25
55 D-24-55 6.5" 24.5" 101.84 DC-55 2" 24.5" 26.77
Item # Description Price
BM-ED-2 Pan 65.5" x 29" x 9"h, Cap. 61gal $95.15
BM-ED-4 Pan, 48" x 48" x 7"h, Cap. 65gal 209.32
BM-ES Pan 52.1" x 52.1" x 7.5"h, Cap. 70gal 209.32
Item # Description Price
BM-1DP Pallet 1 Drum 36" x 36" x 16h, Cap. 61gal, 800lbs $423.29
BM-2-DP Pallet 2 Drum 50" x 26.2" x 16h, Cap. 61gal, 1600lbs 423.29
BM-3-DP Pallet 3 Drum 76" x 26.2" x 11h, Cap. 65gal, 2400lbs 577.29
BM-4-DP Pallet 4 Drum 49" x 49" x 16h, Cap. 110gal, 3200lbs 755.89
 Capacity Size Approx. Closed Head Open Head
 Gallons Liters Dia. x H Weight Item # Price Item # Price
 15 56.8 16" x 223
⁄4" 8 lbs. SS-CH-15 $59.18 SS-OH-15 $70.89
 20 75.7 171
⁄4" x 263
⁄8" 10 lbs. SS-CH-20 69.03 SS-OH-20 82.75
 30 113.6 193
⁄8" x 293
⁄4" 15 lbs. SS-CH-30 91.59 SS-OH-30 113.45
 35 132.5 203
⁄4" x 313
⁄4" 16 lbs. SS-CH-35 104.08 SS-OH-35 116.80
 55 208.2 231
⁄2" x 361
⁄4" 23 lbs. SS-CH-55 137.12 SS-OH-55 164.32
n Four Sizes
n 4 Swivel Casters
n 600 Pound Capacity
n Outdoor and Indoor Use
4-Drum
Pallets
Available
Dixie Drum Dollies Drum Covers
Protect your drums from bung seepage in outdoor storage situations. Works well with either
poly, metal, or fiber drums. Eliminates possible contamination form rainwater or dirt from
entering your drum. The cover simply lays on the top of the drum and has a 2.5" lip around
the perimeter. A four-inch center handle makes removal easy. FDA approved, UV protected,
and rust proof. The durability of this cover allows drums to be stacked on top of each other.
Economical Nestable OH & CH Drums
n HDPE Resin
n 460°F Max. Filling Temp.
n Max. Stackable with pallets
check ratings
n Bung: FM,FN, GB, or GC
n Stackable without interlocking
for the (OH only)
Light weight, durable, UN approved for hazardous materials (packaging
group 2). FDA-USDA approved, easy to handle, rust proof, and UV
protected. Drums are tapered to nest when empty for efficient storage
space. Available in a lever locking closure ring, and blue in color. Great
for use with food products, hazardous waste, or other solid materials.
Sump Catch Basin Spill Tub
Prevent environmental contamination or damage by collecting
leaks and spills during dispensing, filling, or waste collection.
100% Polyethylene construction resists most chemicals and will
not corrode, rust, or deteriorate. Meets or exceeds the requirements
of EPA standard CFR 264.175.
n LLD Polyethylene
n Color: Yellow
n Wall Thickness: .20”
n Weight: 15lbs
Item # Description Price
 $
Poly Carts
Durable laundry or material handling
carts, 11 and 16 bushel sizes.
Has four 3" swivel phonetic casters
for mobility. Available in gray, black,
and white. FDA approved plastic.
n Plywood reinforced base
n 4 swivel casters
Item # Description Price
DCP-10 Cart 10cu/ft White or Gray 42"l x 26"w x 30"h $269.83
DCP-14 Cart 14cu/ft White or Gray 45"l x 29"w x 36"h 297.74
Item # Description Price
O-12 12 gal capacity Open Head, 14.9"dia x 23.3"h x .115" wall $84.42
O-14 14 gal capacity Open Head, 13.7"dia x 26.3"h x .115" wall 63.89
O-30MB 30 gal capacity Open Head, 21.3"dia x 30.1"h x .120" wall 96.83
O-55MB 55 gal capacity Open Head, 23.8"dia x 37.7"h x .150" wall 124.07
P-15 15 gal capacity Closed Head, 18.5"dia x 26.3"h x .150" wall 46.80
P-30 30 gal capacity Closed Head, 19.4"dia x 29.5"h x .150" wall 70.58
BCH-55 55 gal capacity Closed Head, 23.3"dia x 34.9"h x .150" wall 48.47
Item # Description Price
BM-SSB Basin 35.5"dia x 13.75"h 49 gal $82.23
Single and Double Drum Polyethylene
Pallets for 55 Gallon Drums
NEW
NEW
NEW
Durable
Polyethylene
Dollies
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 92
92_92 3/30/14 12:05 PM Page 92
Quick Spec
n Diameter: 261
⁄2"
n Height: 33"
n Volume Capacity [Nom]: 55 gal
Tanks
2655 BRUTE® Container Without Lid
Durable, heavy-duty containers for a variety of uses.
Item # Description Price
2655 BRUTE® 55-Gallon Container without Lid $75.19
2643 BRUTE® 44-Gallon Container without Lid 60.38
2643-60 BRUTE® 44-Gallon Utility Container 60.38
2632 BRUTE® 32-Gallon Container without Lid 38.93
2654 Lid for 2655 BRUTE® Container 31.34
2645-60 BRUTE® Lid 27.46
2631 Lid for 2632 BRUTE® Containers 12.76
2640 BRUTE® Dolly for 2620, 2632, 2643, 2655 Containers 61.55
2646 BRUTE® Tandem Dolly for 2620, 2632, 2643, 2655, 3526, 3536 Containers 174.93
5011-88 Fits 2655 – Linear Low Density Can Liners 43" x 49" 100ct. 199.51
5079 Fits 2655 – High Density Coreless Roll Can Liners 43" x 49" 200ct. 119.13
Item # Description Price
FG444100 BLA HD Platform Truck $571.96
Item # Description Price
FG452088BLA Utility Cart HVYD 2SHLF BLK $175.00
FG450088BLA Utility Cart 2 SHLF BLK 154.13
FG450500BLA Utility Cart FLAT SHLF SM BLK 164.60
FG452010BLA Utility Cart 2 SHLF BLK W/PNEU CASTERS 339.17
FG452500BLA Utility Cart FLAT SHLF MED W/2 SHLF BLK 182.98
FG454500BLA Utility Cart FLAT SHLF HVYD W/2 SHLF BLK 265.74
FG454600BLA Utility Cart 2 SHLF HVYD BLK 280.41
1314 Tilt Truck, Utility Duty (ROTATIONAL MOLDED)
Industrial strength construction
transports heavy loads with ease.
Ideal for moving large,
heavy loads in almost any
environment.
Quick Spec
n Length: 721
⁄4 in
n Width: 331
⁄2 in
n Height: 433
⁄4 in
n Capacity: 850 lb
Quick Spec
n Length: 48 in
n Width: 24 in
n Mass Capacity [Nom]: 2000 lb
4441 HD Platform Truck (MED 24" X 48")
Rubbermaid 4500 Utility Cart
Quick Spec
n Length: 451
⁄4 in
n Width: 257
⁄8 in
n Height: 331
⁄4 in
n Mass Capacity [Nom]: 500 lb
Perfect for transporting materials,
supplies, and heavy loads in almost
any environment.
Structural Foam
Sump Basins
Item # Description Price
SF15 Basin Sump 15 Gal. 18.5" x 17.5" $25.75
SF15-DR Basin Sump 15 Gal. 18.5" x 17.5" Perforated 32.50
SF1850S Lid for SF15 Slotted 13.13
SF1850B Lid for SF15 Blank 17.01
SF1850E Lid for SF15 E-Flange 11
⁄4, 11
⁄2, 2, & 3" 22.50
SF20 Basin Sump 20 Gal. 18" x 22" 31.75
SF20DR Basin Sump 20 Gal. 18" x 22" Perforated 5
⁄16 38.75
SF22A Basin Sump 22.5 Gal. 18" x 24" 37.50
SF22A-DR Basin Sump 22.5 Gal. 18" x 24" Perforated 5
⁄16 44.50
SF22B Lid for SF20 or SF22A Blank 24.95
SF60913 Lid for SF20 or SF22A Slotted 11.75
SF2000E Lid for SF20 or SF22A E-Flange 11
⁄4, 11
⁄2, 2, & 3" 33.75
Patent Pending non-corrosive,
nylon encapsulated inserts.
SUSTAINABLE
PRODUCTS
Item # Description Price
FG131400 BLA Utility Duty Tilt Truck $621.19
2645-60
BRUTE® Lid
Lab Basin™ Series Neutralization Tanks
Item # Description – Limestone Required Price
LB-15 Low Profile 15 gal. 25"L x 19"W x 141
⁄4"H, 200lbs Capacity $578.00
LB-25 Low Profile 25 gal. 27"L x 21"W x 15"H, 275lbs Capacity 239.65
LB-35 35 gal. 33"L x 25"W x 25"H, 450lbs Capacity 51.10
LB-50 50 gal. 37"L x 28"W x 281
⁄2"H, 650lbs Capacity 64.85
PIPE CONNECTION CHOICES
n Plain End 11
⁄2, 2, 3, 4, 6" w/Out or w/Diptube Outlet
n Male Thread End 11
⁄2, 2, 3, 4, 6" w/Out or w/Diptube Outlet
n Flanged11
⁄2, 2, 3, 4, 6" w/Out or w/Diptube Outlet
4", 6" not avail. For LB-15 or LB*25. 6" not avail. With LB-35 or LB-50. Call for Riser Pricing.
Limestone Chips Available 1.82lbs call
Lab Rat™
Series
Under counter
neutralization tank
n Two sizes: 2 and 5 gallons High Density
Polyethylene
n For under counter sink installations
n Gasketed top with captive hand-thread
hardware
n Easy to carry seamless HDPE design
n Combination 11
⁄2" or 2" FPT connections std.
n Built-in top and side inlet options
n Optional top vent connection (LB-5 only)
n Internal sewer gas seal
Item # Description Price
LB-2 2 gal. 9"L x 9"W x 101
⁄8"H, 11
⁄2" or 2"NPT $198.93
LB-5 5 gal. 14"L x 14"W x 125
⁄8"H, 11
⁄2" or 2"NPT 239.65
n Lifetime Warranty 100% Corrosion-Proof
n Water- & Gas-tight Highway Traffic Rated
Cover Option
n Diffusion Flow™ Design Provides
Elongated Flow Pattern and Better
Neutralization
n Six sizes: 15 through 275 gal.
n Easy to carry HDPE design
n Above or below grade installations
n TeleGlide™ field adjustable riser system
n Models LB-50 through LB-275 suitable for
exterior installations
NEW
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 93
93_93 3/30/14 12:06 PM Page 93
Tanks
Installed Fittings for St. Gobain Tanks
Norton will install tank fittings for you. All fittings except bulk heads
are installed by hot inert-gas welding. The fitting price, which includes
in stal la tion, should be added to the price of the tank. When ordering, specify the type of fitting
required and exactly where it is to be installed. Sketches are necessary.
Easy assembly to a tank. Cut a hole in tank wall (using a hole
saw). Remove locknut from fitting, leaving gasket on body.
Insert body through hole in tank from the inside, trapping the
washer between tank wall and shoulder of tank
adapter. Screw locknut back onto body for a tight,
leak-free installation . . . even on curved surfaces.
Heavy Duty Bulkhead Fittings
Self-Aligning Bulkhead Fittings
Hayward Self-Aligning Bulkhead Fittings allow tank piping
connections to be made in a straight line without fabricating
special fittings to correct for the curvature of the tank. Using
a precision machined ball sealed inside a bulkhead fitting
housing, the Hayward Self-Aligning Bulkhead Fitting permits
connections with an
offset angle of up to 27°.
Full Couplings Half Couplings
 Size of Fittings (inches)
Fittings Material Item # 1
⁄2 3
⁄4 1 11
⁄4 11
⁄2 2 3 4 6
Bulkhead Fittings PVC 87001 $81.89 $93.07 $97.38 $110.27 $114.21 $118.52 $174.54 $303.14
 PP 88001 92.58 111.74 127.31 143.29 156.44 197.67 326.70 528.87
Half Nipples, Threaded PE 93857 114.58 129.23 142.52 155.59 162.11 203.54 252.89
Flanged Outlets PE 93400 411.23 475.38 518.73 539.78 608.14 674.66 843.12 $912.44
Couplings PE 87005 149.78 166.58 187.84 255.32 318.50 467.44 591.50
Half Couplings PE 93840 106.49 121.32 166.34 240.30 240.30 343.68 435.41
 PVC
Threaded 1" SF10100T $115.70
Threaded 2" SF10200T 175.67
Threaded 3" SF10300T 251.08
All Bulkhead Fittings have one EPDM gasket.
 PVC Soc. x Thd. PVC Thd. x Thd. CPVC Soc. x Thd.
Size Item # Price Item # Price Item # Price
1
⁄2" 8171V-005 $24.33 8172V-005 $30.63 8171V-005C $30.05 3
⁄4" 8171V-007 24.90 8172V-007 31.69 8171V-007C 34.57
1" 8171V-010 25.47 8172V-010 36.21 8171V-010C 40.01
11
⁄4" 8171V-012 33.67 8172V-012 41.09 8171V-012C 49.15
11
⁄2" 8171V-015 37.09 8172V-015 46.89 8171V-015C 51.26
2" 8171V-020 60.85 8172V-020 69.48 8171V-020C 77.59
3" 8171V-030 109.19 8172V-030 118.17 8171V-030C 132.96
4" 8171V-040 273.14 8172V-040 288.04 8171V-040C 294.49
6" 8171V-060 491.33 8172V-060 551.11 8171V-060C 740.08
Installed fittings are available from Nalgene (see above). Call for other configurations.
 PVC EPDM CPVC EPDM Natural PPL EPDM
Size End Conn. Item # Price Item # Price Item # Price
1
⁄2" Skt. x Thd. BFAS1005CES $10.58 BFAS2005CES $14.41 1
⁄2" Thd. x Thd. BFAS1005TES 13.62 BFAS2005TES 18.17 BFAS3005TES $19.05 3
⁄4" Skt. x Thd. BFAS1007CES 11.74 BFAS2007CES 17.08 3
⁄4" Thd. x Thd. BFAS1007TES 14.95 BFAS2007TES 21.26 BFAS3007TES 22.82
1" Skt. x Thd. BFAS1010CES 12.83 BFAS2010CES 19.56
1" Thd. x Thd. BFAS1010TES 16.24 BFAS2010TES 23.42 BFAS3010TES 29.35
11
⁄4" Skt. x Thd. BFAS1012CES 17.08 BFAS2012CES 26.59
11
⁄4" Thd. x Thd. BFAS1012TES 22.09 BFAS2012TES 35.85 BFAS3012TES 37.35
11
⁄2" Skt. x Thd. BFAS1015CES 17.08 BFAS2015CES 26.59
11
⁄2" Thd. x Thd. BFAS1015TES 22.09 BFAS2015TES 35.85 BFAS3015TES 37.35
2" Skt. x Thd. BFAS1020CES 25.44 BFAS2020CES 53.87
2" Thd. x Thd. BFAS1020TES 31.20 BFAS2020TES 60.83 BFAS3020TES 58.11
3" Skt. x Thd. BFAS1030CES 46.70 BFAS2030CES 91.94
3" Thd. x Thd. BFAS1030TES 54.40 BFAS2030TES 104.23 BFAS3030TES 114.43
4" Skt. x Thd. BFAS1040CES 91.94 BFAS2040CES 205.40
4" Thd. x Thd. BFAS1040TES 102.69 BFAS2040TES 221.00 BFAS3040TES 214.18
Corzan® is a trademark of BF Goodrich Company.
Threaded Half Nipples Bulkhead Fittings
EASY
INSTALLATION
”Bottom Drain“ Poly Tank Flanges PATENTED
 Outlet x Inlet EPDM. Price Viton Price
 3
⁄4" x 11
⁄2" Threaded Flange BF075BD $25.94 BF075BDV $39.30
 1" x 11
⁄2" Threaded Flange BF100BD 25.94 BF100BDV 39.30
 11
⁄4" x 11
⁄2" Threaded Flange BF125BD 25.94 BF125BDV 39.30
 11
⁄2" x 2" Threaded Standard Port Flange BF150BD 24.68 BF150BDV 74.65
 2" x 2" Threaded Standard Port Flange BF200BD 24.68 BF200BDV 74.65
 3" x 3" Threaded Flange BF300BD 45.98 BF300BDV 113.95
Poly Bolted Tank Flanges
Fits most cone bottom & chemical inductor tanks, 30 gallons and larger.
Patented
When installed in the bottom of the tank, the
“Bottom Drain” Tank Flange allows full drainage!
100% Fully
Drainable!
100% Fully
Drainable!
FLOW FLOW
Quick Spec
n Stainless steel bolts
n Bolt head plugs sealed ultrasonically
n Glass reinforced polypropylene
n EPDM gaskets standard
(Viton available)
Ultrasonically Sealed! Ultrasonically Sealed!
EASY TANK CONNECTIONS – Hayward’s BFA
Series Industrial Bulkhead Fittings (Tank Adapters)
easily permit safe, quick pipe connections to be
made to plastic, metal or plastic tanks.
BFAS Series Industrial Bulkhead Fittings
FEATURES
1
⁄2" to 6" – PVC, Corzan® CPVC and PPL – Standard Flange 1
⁄2" to 1" – PVC, Corzan® CPVC and PPL – Large Flange
Visit us on the web for a
complete selection of
Hayward bulkhead fittings.
n Left-Hand Threads
n Rated to 150 PSI
n EPDM or FPM Gasket Seal
n Hex Body for One
Person Installation
n Full Buttress Threads
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 94
94_94 3/30/14 12:08 PM Page 94
Portable Mixers
Series A and B Economy
Batch Mixer 1750 RPM
Economy Line of small direct drive mixer for samall bathes of
low viscosity fluids.
n Universal Motor Mount accepts 48 & 56 frame foot
n Available in explosion proof
n Shaft & Prop 316SS
n Clamp adjustable to any angle
Item # Description Price
Series A & B Direct Drive Batch Mixer 1750 PRM TEFC
A-1.0 1
⁄4 HP-1-115 Motor 32" Shaft, 1
⁄2 Dia. $594.00
B-1.0 1
⁄4 HP-1-115/230 Motor 32" Shaft, 1
⁄2 Dia. 668.00
B-2.0 1
⁄3 HP-1-115/230 Motor 32" Shaft, 1
⁄2 Dia. 716.00
B-3.0 1
⁄2 HP-1-115/230 Motor 32" Shaft, 1
⁄2 Dia. 808.00
B-3.2 1
⁄2 HP-3-230/460 Motor 32" Shaft, 1
⁄2 Dia. 711.11
Drum Mixers Series F Mixer
CLAMP TO LIP ENTERING 55 GAL. DRUM 1750 RPM
Item # Description Price
Series F Mixers - Motor totally enclosed fan-cooled (TEFC) 331
⁄ 8" Shaft
F-1.0 1
⁄4 HP –115/230 Motor 755.08
F-2.0 1
⁄3 HP-1-115/230 Motor 824.31
F-3.0 1
⁄2 HP-1-115/230 Motor 901.85
F3.2 1
⁄2 HP-3-230/460 Motor 850.16
Drum Mixers Series E Mixer
BUNG ENTERING 55 GAL. DRUM 1750 RPM
Item # Description Price
Series E Mixers - Motor totally enclosed fan-cooled (TEFC) 29" Shaft
E-1.0 1
⁄4 HP –115/230 Motor $768.93
E-2.0 1
⁄3 HP-1-115/230 Motor 805.85
E-2.2 1
⁄3 HP-1-115/230 Moto 822.45
E-3.0 1
⁄2 HP-1-115/230 Motor 857.54
E-3.2 1
⁄2 HP-3-230/460 Motor 816.13
Bromine Feeders
Clear PVC bodies have two threaded bottom connections
and one 6" top opening with threaded O-ring closure. Feeders
are rated to a maximum pressure of 125 psi and maximum
temperature of 100°.
n Optional PVC piping kits include unions, valves and all
required fittings
n Optional flow indicator in four ranges
Vinylester resin bodies have two threaded side connections,
one threaded bottom connection and one 21
⁄2" or 4" top
opening with threaded gasketed closure. Feeders are rated to
150 psi and a maximum temperature of 150°F
Item # Description Price
Series FTF Filter Feeder Dissolving Cylinder
FTF-2HP Body & Basket Full Bottom Drain 2.5 Gal. $588.79
FTF-2DB Body & Basket Dish Bottom 2 Gal. 588.79
FTF-5HP Body & Basket Full Bottom Drain 7.5 Gal. 675.85
FTF-5DB Body & Basket Dish Bottom 5 Gal 678.83
FTF-5150HP Body & Basket Full Bottom Drain 7.5 Gal. 909.89
FFT-5150DB Body & Basket Dish Bottom 5 Gal. 909.89
Bag Replacement Ring Top Polyester 1, 5, 20, 50 micron 24.50
CL Models welded base with 43
⁄8 bolt holes, DB Models Full bottom drain
with bolt down legs. HP Models 11
⁄2" In/Outlet fast clean/flush. Using
the kit allows feeder to function simultaneously as a side stream filter.
Item # Description Price
Series VFT By-Pass Feeder
VTF-2HP Vertical Flat Bottom 2 Gal. 4" closure $255.49
VTF-5HP Vertical Flat Bottom 5 Gal. 4" closure 332.90
VTF-10HP Vertical Flat Bottom 10 Gal. 4" closure 480.01
VTF-12HP Vertical Flat Bottom 12 Gal. 4" closure 521.62
VTF-2x4HP Four Fitting 4" closure 2 Gal. apprx. 279.71
VTF-5x4HP Four Fitting 4" closure 5 Gal. apprx. 354.19
Series DBF By-Pass Feeders
DBFC-2 w/Cartridge mount Feeders 4" Closure 2 Gal. 497.42
DBFC-5 w/Cartridge mount Feeders 4" Closure 5 Gal. 612.59
DBF-2HP Feeders 4" Closure 2 Gal. Full Bottom Drain 283.55
DBF-5HP Feeders 4" Closure 5 Gal. Full Bottom Drain 358.07
DBF-10HP Feeders 4" Closure 10 Gal. Full Bottom Drain 518.71
Cartridge Filters 5 or 20 micron For use with DBFC Models 26.00
Item # Description Price
Bromine Feeders
CLR-25 Clear PVC 25lbs 6"dia x 32"h $720.00
CLR-50 Clear PVC 50lbs 6"dia x 56"h, strainer 898.93
BR-2 Type1 Fiberglass Side In/Out Side 15lbs 298.06
BR-5 Type1 Fiberglass Side In/Out Side 40lbs 335.81
BR-10 Type1 Fiberglass Side In/Out Side 80lbs 439.36
BT-15 Type2 Fiberglass Side In/Out Bottom 15lbs 405.52
BT-40 Type2 Fiberglass Side In/Out Bottom 40lbs 421.97
BT-80 Type2 Fiberglass Side In/Out Bottom 80lbs 586.46
By-Pass Feeders
FTF BY-PASS FEEDERS SERIES
n Stainless steel dissolving basket holds and
fully supports the filter bag inside (order bag
separately).
n Model FTF-5150HP features oversize 11
⁄2"inlet
and outlet connections. Can be used for system
cleanup with high volume pumps where
high flow rates are desired for fast clean-up
or flush-out prior to start-up.
VTF SERIES BY-PASS FEEDER
n Most popular and economical of the by-pass
feeders Working pressure; to 300PSI max. at 200F
n Tank shell:
2 gallon unit 11 gauge steel
5 gallon unit 10 gauge steel
10 gallon unit 10 gauge steel
12 gallon unit 10 gauge steel
n Tank heads
2 gallon unit 11 gauge steel
5 gallon unit 9 gauge steel
10 gallon unit 9 gauge steel
12 gallon unit 9 gauge steel
n Cap: Cast iron with Square Buna N ring
DBF SERIES VERTICAL STYLE DISH BOTTOM OUT
n This series features wide-mouth caps. These caps use a square section O ring seal.
n Closes easily by hand. Demountable leg extensions and a full bottom drain.
n Optional Filter Bag Kit are available for DBF & VTF.
n Cartridge filter modification cannot be installed in DBFC
FTF VTF DBF
NEW
NEW
www.facebook.com/webbplastics
NEW
NEW NEW
Also Available: Explosion
Proof class 1 D & Air
Motor Models Call...
Also Available: Explosion Proof
class 1 D & Air Motor Models Call...
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 95
95_95 3/31/14 7:39 AM Page 95
Model JG-3.4
Neptune's Laboratory Mixers are available in air or electric
drive with clamp or bracket mount. The air motors include a
control valve and muffler.
Model L-1-AC includes a C-clamp and the air supply pipe
passes through the C- clamp. Model L-1-A does not include
a C- clamp but the air supply pipe will fit a standard
one-half-inch laboratory bar clamp.
Cord and plug are standard with 1550 rpm electric models.
Operating speed ranges from 200 to 2000 rpm with Air motors.
Model JG-7.1
Series JD and JG Lab Mixers
Model JG-3.0
Series L Laboratory Mixers – BAR, CLAMP AND BRACKET MOUNT
 Shaft Shaft Prop. Shaft
Item # Mount Type Motor Description RPM Diameter Length Diameter Material Price
L-1-CL “C” Clamp 1
⁄20 HP-115-60-TEFC 1550 5
⁄16" 30" 3" S.S. $356.98
L-1-CL24 “C” Clamp 1
⁄20 HP-115-60-TEFC 1550 5
⁄16" 24" 3" S.S. 356.98
L-1-CL18 “C” Clamp 1
⁄20 HP-115-60-TEFC 1550 5
⁄16" 18" 3" S.S. 356.98
L-1-BK Bracket 1
⁄20 HP-115-60-TEFC 1550 5
⁄16" 30" 3" S.S. 318.20
L-1-A Lab Clamp HP AIR MOTOR Variable* 5
⁄16" 20" 3" S.S. 404.88
L-1-AC “C” Clamp HP AIR MOTOR Variable* 5
⁄16" 20" 3" S.S. 460.77
Cord and plug included on electric motor models. Air (speed) control valve include on air motor models.
*Develops 0.10 HP @ 2000 RPM – Requires 6 CFM @ 60 PSI
0.175 HP @ 2000 RPM – Requires 10 CFM @ 60 PSI
Series JD: Direct Drive Mixer, Clamp or Optional Cup
Plate Mount 1750 RPM, Grease Lube
 Shaft Shaft Prop Price
Item # Motor Description Diameter Length Diameter (316SS)
JD20 1
⁄3 HP-1-115/230-TEFC 3
⁄4" 36" 4" $1,562.50
JD30 1
⁄2 HP-1-115/230-TEFC 3
⁄4" 48" 5" 1,646.90
JD34 1
⁄3 TO 1
⁄2 HP AIR MOTOR 3
⁄4" 48" 5" 1,725.59
 Air Requirements: 12–20 CFM at 20–40 PSI
JD40 3
⁄4 HP-1-115/230-TEFC 3
⁄4" 48" 5" 1,676.55
JD44 3
⁄4 HP AIR MOTOR 3
⁄4" 48" 5" 1,759.81
 Air Requirements: 30 CFM at 60 PSI
JD51 1 HP-3-230/460-TEFC 1" 60" 6" 1,934.31
JD54 1 HP AIR MOTOR 1" 60" 6" 2,196.62
 Air Requirements: 40 CFM at 40 PSI
JD61 11
⁄2 HP-3-230/460-TEFC 1" 60" 6" 2,008.44
JD64 11
⁄2 HP AIR MOTOR 1" 60" 6" 2,261.63
 Air Requirements: 55 CFM at 60 PSI
JD71 2 HP-3-230/460-TEFC 1" 60" 7" 2,430.43
JD74 2 HP AIR MOTOR 1" 60" 7" 2,616.33
 Air Requirements: 65 CFM at 75 PSI
Option: Dual Prop also available.
Series JG: Gear Drive Mixer, Clamp or Optional Cup
Plate Mount 350 RPM, Heavy Helical Gear, Grease Lube
 Shaft Shaft Prop Price
Item # Motor Description Diameter Length Diameter (316SS)
JG20 1
⁄3 HP-1-115/230-TEFC 3
⁄4" 48" 10" $1,990.19
JG30 1
⁄2 HP-1-115/230-TEFC 3
⁄4" 48" 12" 2,301.55
JG34 1
⁄3 TO 1
⁄2 HP AIR MOTOR 3
⁄4" 48" 12" 2,379.11
 Air Requirements: 12–20 CFM at 20–40 PSI
JG40 3
⁄4 HP-1-115/230-TEFC 3
⁄4" 60" 13" 2,496.58
JG44 3
⁄4 HP AIR MOTOR 3
⁄4" 60" 13" 2,575.27
 Air Requirements: 30 CFM at 60 PSI
JG51 1 HP-3-230/460-TEFC 1" 60" 14" 2,623.18
JG54 1 HP AIR MOTOR 1" 60" 14" 2,886.63
 Air Requirements: 40 CFM at 40 PSI
JG61 11
⁄2 HP-3-230/460-TEFC 1" 60" 15" 2,906.02
JG71† 2 HP-3-230/460-TEFC 11
⁄4" 60" 16" 4,035.13
JG81† 3 HP-3-230/460-TEFC 11
⁄4" 72" 16" 4,135.49
JG84† 4 HP AIR MOTOR 11
⁄4" 72" 16" 4,323.68
 Air Requirements: 125 CFM at 90 PSI
† Cup Plate Mount Only. Option: Dual Prop also available.
Portable Mixers
Dual Prop Available
Dual Prop Available
Bulk Container Mixer – Gear Drive (BUNG OR BRACKET MOUNT) Series JGT - 420 RPM Series RGT - 350 RPM
 Standard Shaft Shaft
Motor Description Model Dia. Price Model Dia. Price
Totally-enclosed fan-cooled (TEFC)
1
⁄2 HP-1-115/230 JGT-3.0 3
⁄4" $2,508.92 RGT-1.0 3
⁄4" $1,737.00 1
⁄2 HP-3-230/460 JGT-3.1 3
⁄4" 2,435.08 RGT-1.2 3
⁄4" 1,682.25 3
⁄4 HP-1-115/230 JGT-4.0 3
⁄4" 2,666.77 RGT-2.0 3
⁄4" 1,791.74 3
⁄4 HP-3-230/460 JGT-4.1 3
⁄4" 2,595.70 RGT-2.2 3
⁄4" 1,752.97
1 HP-1-115/230 RGT-3.0 3
⁄4" 1,926.32
1 HP-3-230/460 JGT-5.1 3
⁄4" 2,627.08 RGT-3.2 3
⁄4" 1,859.03
Air motor – Option included Air Set Kit 1
⁄2 HP AIR JGT-3.4 3
⁄4" 3,036.08 RGT-1.4 3
⁄4" 2,923.13
Air Requirements: 20CFM at 40PSI
3
⁄4 HP to 1 HP AIR JGT-5.4 3
⁄4" 3,726.92 RGT-3.4 3
⁄4" 3,155.79
Air Requirements: 30-40CFM at 25-35PSI
For Explosion-proof models, call Webb.
Model L-1-BK
Quick Spec
n Square pitch 1.0 ratio marine propellers are
used exclusively. Flow coefficients and
power consumption characteristics equal
those of the best hydrofoil impeller designs
n 316SS propellers and shafts are
standard. Optional coatings such as
rubber, PVC or Teflon® also available
n Variable speed drives also available.
n Cast aluminum housing.
n Mixers have adjustable angles of entry by
indexed ball-and-socket design to achieve
different process results
n Motors are available in TEFC or
explosion-proof enclosures (1750 rpm, 56C
frame). Air motors also available
n Vibration-absorbing pad standard
n All mixer shaft bearings are
permanently lubricated
Optional AC available. 35-350 RPM. n Fixed position mounting plate also available
Optional Series JGT
bracket adjusts to fit
32" to 501
⁄2" wide containers.
MODEL JGT (Steel) $510.00
SERIES JGT, 420 RPM
n Mounts to the tank or optional universal bracket.
n 316SS propeller folds to fit through
2" opening; opens to
9" operating diameter.
n 35" shaft length.
Laboratory-type Air
Mixer Model L-1-AC
C-Clamp as shown.
www.facebook.com/webbplastics
SERIES RGT, 350 RPM
n Mounts to the tank or optional bracket.
n 316SS propeller folds to fit through 2" opening; opens to
9" operating diameter.
n Second folding propeller
bolts anywhere on 3
⁄4" shaft
– part #004479.
Optional Series RGT
bracket 311
⁄2" to 50"
wide containers
Model RGT-BKT
$495.00
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 96
96_96 3/31/14 7:43 AM Page 96
Float Valve
Available in PVC or Polypropylene
MODEL 2HL/M2AY
All plastic PVC or Polypropylene for controlled liquid levels in
all types of tanks. Float valves have been successfully used
throughout the United States. They can be installed with simple
KARI float switches are unique cable-suspended liquid level sensors offering convenience and
reliability for a wide range of pump control and alarm applications. Their most important feature
is the ability to sense multiple levels using only one float. This results in a simple device that
can be used in many different level sensing situations. The dependability of KARI float switches
has been proven in many thousands of installations, worldwide, for over a quarter of a century.
Specially designed for: Deionized Water Distilled Water Corrosive Chemicals
Cable-Suspended Float Switches
MODEL 3HE MODEL 4H
Sense multiple levels
with only one float!
 Function Number of
 Model High Alarm Low Alarm Pump Up Pump Down Conductors in Cable Item # Price
 1L • 2 22269 $139.34
 1H • 2 22271 139.34
 1C • • 3 22270 292.75
 1LE Dual 4 22452 295.49
 1HE Dual 4 22451 295.49
 2HL • • 3 22273 292.75
 2L • 2 22272 295.49
 2H • 2 22274 295.49
 3L • • 3 22275 432.07
 3LE Isolated • 4 22390 420.17
 3H • • 3 22276 307.04
 3HE Isolated • 4 22277 430.67
 4L • • • 4 22278 553.19
 4H • • • 4 22280 553.19
 4L5E • Duplex 5 22279 666.27
 4H5E • Duplex 5 22281 666.27
 M1L • 2 22282 143.35
 M1H • 2 22284 143.35
 M1C • • 3 22283 232.19
 M2AY • • 3 22048 448.22
 M2L • 2 22285 232.19
 M2H • 2 22287 232.19
 FPT PVC Polypropylene
 Pipe Size Item # Price Item # Price
 1
⁄4" FC-FLV-25* $209.93 FC-PFL-25 $264.40
 3
⁄8" FC-FLV-38* 209.93 FC-PFL-38 264.40
 1
⁄2" FC-FLV-50 209.93 FC-PFL-50 264.40
 3
⁄4" FC-FLV-75 305.15 FC-PFL-75 371.99
 1" FC-FLV-100 371.97 FC-PFL-100 329.24
 11
⁄2" FC-FLV-150 796.99 FC-PFL-150 1,051.34
 2” FC-FLV-200 1,000.48 FC-PFL-200 1,263.31
* Bushed from 1
⁄2"
(M) Mini-Series Standard
Series
MODEL 4L5E
Quick Spec
n Usable in most liquids
n Installation does not require
penetration of tank wall
n Adjustable switch-point levels
n Polypro float
n PVC Cable
n Proven reliability in operation
n No maintenance required
n Cost effective
n 16 Foot cable standard
Quick Spec
n Polypropylene float*
n Easy to install
n Pressure limit 80 PSI
n High Flow rates
n Piston material, hi-density,
unpigmented
polypropylene
n Four mounting holes at
top of valve
Level Control
piping over the top edge of the tank or by
using a tank adapter. After installation,
the Float Valve will automatically
keep the tank as full as needed by
replacing liquid lost
by evaporation,
spillage or
drainage.
Pressure: 80 PSI MAX at 20°C
Derate pressure capability
to zero at 70°C
Temperature: 90°C MAX
Specific Gravity: .8 MIN
Length Overall: 4.50"
Thread NPT: 1
⁄4"
Float Diameter: 2.06"
Leadwire Length: 24.00"
Series 20-611 Vertical Mounting Liquid Level Control
The 20-611 is offered as either a normally open or normally closed switch. Since the unit can
be mounted “threads up” or “threads down,” merely specifying NO or NC is insufficient
because what is “your” normal is not known to us. The switches are identified at the end of the
stem, “WET OPEN” or “DRY OPEN.” This signifies behavior according to the following def i ni tion:
Wet Open: Switch opens as float ap proach es the hex and closes as float ap proach es the stop
ring at the opposite end. Dry Open: Switch opens as float ap proach es the stop ring and closes as
APPLICATION ENVIRONMENT
Item # Description Price
Electrical Ratings Options: 120VAC 15amp in-rush, 3amp carry of break
 240VAC 7amp in-rush, 2amp carry or break
 DC De-rate 50%
20-611-PP-WO Stem PP, Float PP, Nut NYL, Viton O-ring, Wet Open $149.76
20-611-PP-DO Stem PP, Float PP, Nut NYL, Viton O-ring, Dry Open 149.76
20-611-KR-WO Stem KR, Float KR, Nut NYL, Viton O-ring, Wet Open 254.32
20-611-KR-DO Stem KR, Float KR, Nut NYL, Viton O-ring, Dry Open 254.32
Please call for quantity discounts. PP= Polypropylene, KR= Kynar-PVDF
float approaches the hex at the opposite end.
Webb Price Only
$
14976
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 97
97_97 3/30/14 12:21 PM Page 97
The switch action of the 15-650 can be con fig ured for either normally open or normally closed
switch action depending upon the orientation of the unit at the time of installation. An orientation
datum arrow symbol is molded into the hex. “Up arrow” denotes float is above the
unit’s center line. Conversely, “down arrow” denotes float is below the unit’s centerline.
The switch action of the 10-782 can be configured
for either normally open or nor mal ly
closed switch action depending upon the ori -
en ta tion of the float on the stem. The product
is shipped with the float in the “magnets
up” normally closed condition. To reverse
this action, remove the float and retaining
ring, turn the float over, and re-assemble the
float and retaining ring.
Pressure: 100 PSI MAX at 20°C
Derate pressure capability
to zero at 70°C
Temperature: 100°C MAX
Specific Gravity: .8 MIN
Position: 30° CANT MAX
Dimensions Inches
Length Overall: 2.1
Thread NPT: 1
⁄8
Float Diameter: 1.0
Leadwire Length: 24.0
Electrical Rating
Contact .080 AMP, 120V 60 Hz, Resistive
rating .040 AMP, 240V, 60 HZ, Resistive
UL File 3.36 VA, 240V, 60Hz
E66144 Pilot Duty
DC 1 AMP MAX at 24 VDC
Pressure: 50PSI MAX at 20°C
Derate pressure capability
to zero at 70°C
Temperature: 90°C MAX
Specific Gravity: .8 MIN
Dimensions: Inches
Length Overall: 2.1
Thread NPT: 1
⁄4, 1
⁄2
Float Diameter: 1.0
Leadwire Length: 24.0
Vertical Mounting Liquid Level Control Side Mounting Liquid Level Control
Electrical Rating
Contact .080 AMP, 120V 60 Hz, Resistive
rating .040 AMP, 240V, 60 HZ, Resistive
UL File 3.36 VA, 240V, 60Hz
E66144 Pilot Duty
DC 1 AMP MAX at 24 VDC
 Materials of Construction
 Item # Wetted Parts Price
*10-782-PP Polypro pylene $25.86
*10-782-KR Kynar PVDF 58.08
Please call for quantity discounts.
 Materials of Construction
 Item # Wetted Parts Price
*15-650-PP Polypro pylene $45.43
*15-650-KR Kynar PVDF 119.19
Please call for quantity discounts.
APPLICATION ENVIRONMENT
APPLICATION ENVIRONMENT
SERIES 10-782
SERIES 15-650
Level Control
Mini-Max All Plastic Level Limit Float Switch Ideal for high or low level alarm service. Mini-Max will control high or low levels of water or
other liquids. Designed for use especially in corrosive atmospheres. Mini-Max is an inexpensive
float switch designed particularly for pure
water service. Mini-Max will not contaminate
high purity water such as distilled, deionized,
or demineralized. Watertight conduit must be
used on all applications.
Liquistat - Liquid Level Control
APPLICATIONS
High or Low level control signals turn pumps,
tanks, heaters ON and OFF. Extra control to
prevent fires and other safety controls.
HOW TO ORDER
1. Specify Flow Control Type 1 or Type 2.
2. Specify voltage: 24 VAC or 120 VAC (standard).
Wire fractional HP motors direct thru 1 HP single
phase (Part No. FC-LLC-10).
3. Indicate mounting bracket desired. Bracket A, B,
or C included in price of standard unit.
4. Give all level control dimensions from top of vessel.
Describe function to be performed at each level. If
indicator lights or alarms are required, also diagram
these positions. For example: P1 stop pump
6"; P2 start pump 24"; P3 ring low level alarm 29".
Price List Notes
n PP and CPVC add $7.00 per foot over 3 ft.
n PVDF add $24.00 per foot over 3 ft.
n The lowest switch position must be 3" above the bottom of the
vessel; if not, a well is required.
n Switches can be no closer than 2" from each other.
n Temperature limit on PP and CPVC is 180°F. PVDF is 300°F.
Units available 3 inches to 20 feet long.
TYPE 1
Pump STARTS
when float
reaches position
P2 and
Stops when
float rises to
position P1.
TYPE 2
Pump STARTS
when float
rises to position
P1 and
STOPS when
float reaches
position P2.
Liquistat protection will
cost you only $480 36! *
Figure 1
Bracket A Bracket B Bracket C Bracket D
BRACKETS
Spare Parts
 Item # Description Price
FC-RS Reed Switch $75.84
FC-20R 20 Amp Relay 163.94
FC-PFA PP Float Assembly 229.54
FC-CFA CPVC Float Assembly 301.93
FC-KFA PVDF Float Assembly 465.89
 120 Volts 60 Hz 1’ 10A (3
⁄4 HP)
 240 Volts 60 Hz 1’ 5A (3
⁄4 HP)
 240 Volts 60 Hz 3’ 5A (11
⁄2 HP)
 480 Volts 60 Hz 3’ 3A (11
⁄2 HP)
* For a standard unit up to 3' length with
2 switch positions. Unit shown with bracket
option A. See other bracket options below.
Units 3' long with 1 or 2 switches in base price
 Material Load Item # Price
 PP 115V to 20 Amps (1 hp or under) FC-LLC-110P $480.36
 PP 24 VAC (1 hp or under) FC-LLC-24P 562.21
 CPVC 115V to 20 Amps (1 hp. or under) FC-LLC-110HT 585.36
 CPVC 24 VAC (1 hp or under) FC-LLC-24HT 654.80
 PVDF 115V to 20 Amps (1 hp or under) FC-LLC-110K 1,623.79
 PVDF 24 VAC (1 hp or under) FC-LLC-24K 1,915.64
Quick Spec
n All PVC construction with
polyethylene float
n Built in mounting adapter and
conduit connector
n Compact
n Easy installation
n No adjustment necessary
(Specify Voltage Need)
Item # Description Price
FC-MM-MR Contact on rising $226.79
FC-MM-BR Break on rising 226.79
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 98
98_98 3/30/14 12:22 PM Page 98
Level Control
Switch-Tek™ Vibration Level Switch
ORDERING LZ12-14 5
Process mount (1)(2)(3)
0 3
⁄4" NPT (US)
2 3
⁄4" G/Rp (Metric)
FEATURES
n Rugged PP-Ryton® sensor and cable rated
NEMA 6 or IP68
n 60 VA relay selectable NO or NC via power
supply wiring polarity
n Compatible with Flowline alarm, controller
and fitting accessories
n Not effected by process foam or light to
medium build-up
APPLICATION
The general purpose vibration
level switch is an ideal choice for
more challenging liquids including
those with light to medium
coating, scaling or foaming
characteristics. Media examples
include wastewater and diluted
caustic. The 60 VA relay provides
a reliable switch interface
with remote devices such as a
PLC, SCADA or alarm. The submersible
sensor is universally
mounted through the wall or
inside the tank.
ORDERING LU10- 5
Sensor material (1)
1 PP
2 PFA -add $100
Sensor length
3 Short
4 Long -add $10
Process mount (2)(3)
0 3
⁄4" NPT (US)
2 3
⁄4" G/Rp (Metric) - add $5
FEATURES
n PP or PFA Teflon®
sensor and cable rated NEMA 6 or IP68
n CSA and Cenelec approved intrinsically
safe for use in hazardous area locations
APPLICATION
CSA and Cenelec approved
intrinsically safe for use
in hazardous area
locations, the ultrasonic
level switch is
broadly applied in
chemical, solvent,
hydrocarbon and
petroleum based liquids.
Media examples
include jet fuel
and sulfuric acid. The
60 VA relay provides a reliable
switch interface with remote devices
such as a PLC, SCADA or alarm.
The short Metric sensor is offered with conical Rp threads on both sides of the wrench flat. The long Metric
sensor is offered with straight G threads on the sensing side and conical Rp threads on the cable side of the
wrench flat. The straight G thread version seals with an included Viton® mounting gasket.
Quick Spec
n Orientation: Universal
n Accuracy: ± 1mm in water
n Repeatability: ± 0.5 mm in water
n Supply voltage: 12-36 VDC
n Consumption: 25 mA maximum
n Contact type: (1) SPST relay
n Contact rating: 60 VA
n Contact output: Selectable NO/NC
n Process temp.: F: -40° to 176°
n Pressure: 150 psi @ 25°C
n Sensor rating: NEMA 6 (IP68)
n Sensor material: PP-Ryton® (glass fill)
n Cable Type: 4-conductor, #22 AWG
(shielded)
n Cable length: Standard: 10'
Option: 25' or 50'
n Process mount: 3
⁄4" NPT (3
⁄4" G/Rp)
n Classification: General Purpose
Quick Spec
n Repeatability: ± 0.5 mm in water
n Consumption: 25 mA maximum
n Contact type: (1) SPST relay
n Contact output: Selectable NO/NC
n Process temp.: F: -40° to 176°
n Pressure: 150 psi @ 25°C
n Sensor material: 1__5: PP
2__5: PFA Teflon®
n Cable type: 4-conductor, #22 AWG
(shielded)
n Cable length: Standard: 10'
Option: 25' or 50'
Mini-Stat All Plastic Miniature Level Limit Control
Item # Description Price
FC-MT-1 Mini-Stat, CPVC/Polypro $239.62
FC-KMT-1 PVDF Mini-Stat 498.97
FC-MTMB Mounting Bracket 53.75
FC-MTR-6 6" Extension with Coupling 44.93
FC-MTR-12 12" Extension with Coupling 61.19
For extra long extensions specify length and
add 54¢ per ft.
Quick Spec
n Compact design – uses minimum space
n Available in CPVC/Poly Pro combination
n Available in All Natural PVDF
n Service to 180°F for the CPVC/PP model
and 250°F for the PVDF model
n Voltage 115 VAC
n 3 feet of wire furnished with unit
n Adjustable height by means of extension
pipe and mounting bracket
n Maximum 3 AMP load
n Add wire for deeper service
0
130
ACCESSORIES – For optimum performance, install the level sensor using the below recommended or direct equivalent fittings.
Item # Description Price
Switch-Pak Single-Point Switch Fitting
LM45-7001 2" NPT Plug, 3
⁄4" NPT Adapter & Nipple, PVC $27.93
LM45-1001 2" NPT Plug, 3
⁄4" NPT Adapter & Nipple, PP 29.61
LM45-5001 2" NPT Plug, 3
⁄4" NPT Adapter & Nipple, PVDF 59.23
Smart Trak Level Switch Car Kit
LM30-1001 Switch Car Kit, 3
⁄4" NPT, Polypropylene 21.18
LM30-1061 Switch Car Kit, 3
⁄4" Rp, Polypropylene 21.18
LM52-2890 2" NPT Bulkhead Fitting, PVC 55.01
Side-Mount Bracket
LM50-1001 2" NPT Bracket, Polypropylene 29.62
Item # Description Price
 Smart Trak Multi-Point Switch Fitting
LM10-1201 2' Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP $50.76
LM10-1401 4' Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP 76.18
LM10-1601 6' Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP 101.54
LM10-1801 8' Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP 126.93
LM10-1001 10' Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP 150.30
LM10-1101 1m Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP 67.70
LM10-1301 2m Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP 110.10
LM10-1701 3m Track, 2" NPT Plug, 3
⁄4" NPT Nipple, PP 152.31
Switch-Tek™ Ultrasonic Level Switch
From Only
$
23269
As Low As
$
24962
NEW
Quick Spec
Standard SPNO/SPNC
n AC voltage (max. switching): 300VAC
n DC voltage (max. switching): 350VDC
n Current (max. switching): 0.5amp
n Current (max. carrying): 2.5amp
Liquid Level Switch
n ON/OFF Differential » 3
⁄8" (0.375")
Pressure/Temperature
n Max. Pressure: 150 PSI/10.3 Bar
n Max. Temperature PVC: 140°F/60°C
n Max. Temperature CPVC: 180°F/82°C
Liquid Level Switch
Series LLS
n Side and Top Mount
n No wetted metals or elastomers
n Superior pivot pin design is 10x less sensitive
to deposit build-up than sliding float models
n 11
⁄4" x 1
⁄4"x 1
⁄2" reducer bushing for through
wall mounting
n 24" of twisted pair 22 gauge output wire
n SPST reed switch for 120/240 VAC 50
Watt power
n Optional DC dry circuit for computer/PLC
interface
n Nema 4 design
Item # Description Price
Level Switch Normally Closed – (Vertical)
LLS125-NCT-PV LLS w/Reducing Bushing 11
⁄4" x 1
⁄4" x 1
⁄2" PVC $161.40
LLS125-NCT-CP LLS w/Reducing Bushing 11
⁄4" x 1
⁄4" x 1
⁄2" CPVC 161.40
Level Switch Normally Open – (Horizontal)
LLS125-NOT-PV LLS w/Reducing Bushing 11
⁄4" x 1
⁄4" x 1
⁄2" PVC 161.40
LLS125-NOT-CP LLS w/Reducing Bushing 11
⁄4" x 1
⁄4" x 1
⁄2" CPVC 161.40
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 99
99_99 3/30/14 12:30 PM Page 99
Level Control
Switch-Tek™ Non-Intrusive RF Capacitance
Level Switch
ORDERING LP50- 005
Bracket material (1)(2)
1 PP
5 PVDF - add $20
6 PE
FEATURES
n Level detection through plastic tank walls up to 1" thick
n Sensor mounting brackets are offered in common tank
materials for adhesive or tack-weld install
ORDERING NOTES
1 Select the bracket that matches the tank wall material in your application.
2 Each sensor comes with one user specified bracket.
With two calibration adjustments, the non-intrusive switch set point will be
customized to your specific tank wall thickness and application media.
Switch-Tek™ Optic Leak Detection Switch
 LO10- 5
Sensor material
1 PP
2 PFA - add $100
Sensor length
3 Short
4 Long - add $10
Process mount (2)(3)
0 3
⁄4" NPT (US)
2 3
⁄4" G/Rp (Metric) - add $5
FEATURES
n PP or PFA Teflon® sensor and cable rated
NEMA 6 or IP68
n 60 VA relay selectable NO or NC via power
supply wiring polarity
n Fail-safe sensor inverts wet to alert user
for maintenance
APPLICATION
The general purpose optic switch is an excellent
choice for leak detection in and around secondary
containment sumps, tanks and pipes.
The sensor can be applied in a broad range of
chemical solutions. Media examples include
ferric chloride and chlorine. The 60 VA relay
provides a reliable switch interface with
remote devices such as a PLC, SCADA or alarm.
The submersible sensor is universally mounted
within the interstitial space of the vessel.
Quick Spec
n Orientation: Universal
n Accuracy: ± 1 mm in water
n Repeatability: ± 0.5 mm in water
n Supply voltage: 12-36 VDC
n Contact type: (1) SPST relay
n Contact rating: 60 VA
n Contact output: Selectable NO/NC
n Process temp.: F: -40° to 176°
C: -40° to 80°
n Sensor rating: NEMA 6 (IP68)
n Cable length: Standard: 10' (3m)
n Pressure: 150 psi (10 bar) @ 25°
C., derated @ 1.667 psi
(.113 bar) per °C. above
25° C.
n Process mount: 3
⁄4" NPT (3
⁄4" G/Rp)
n Mount. gasket: Viton® (G version only)
n Classification: General purpose
n CE compliance: EN 61326 EMC
EN 61010-1 safety
Quick Spec
n Tank mounting: Non-intrusive
Tank mat. comp.: non-metallic
n Accuracy: ± 1 mm in water
n Repeatability: ± 0.5 mm in water
n Dielectric range: >10 constants
n Conductive range: >100 micromhos
n Supply voltage: 12-36 VDC
n Contact type: (1) SPST relay
n Contact rating: 60 VA
n Contact output: Selectable NO/NC
n Process temp.: F: -40° to 194°
n Enclosure rating: NEMA 4X (IP65)
n Enclosure mat.: PSO
n Bracket mounting: 3M adhesive/
plastic thermal weld
n Cable jacket mat: PP
n Cable length: Standard: 10' (3m)
From Only
$
18616
APPLICATION
The general purpose non-intrusive capacitance level switch
is a great choice for clean or ultrapure, aqueous based liquids
with non-coating and/or scaling characteristics. Media
examples include deionized water and hydrochloric acid.
The 60 VA relay provides a reliable switch interface with
remote devices such as a PLC, SCADA or alarm.
As Low As
$
13962
ORDERING
Chemical Flow and Level Indicators
Series “GYW” Water Style Sight Glasses (Viton Seals Standard)
 Pipe PVC CPVC Natural Polypro
 Size Item # Price Item # Price Item # Price
 11
⁄2 GYW150V-PV $388.59 GYW150V-CP $502.95 GYW150V-PP $404.94
 2 GYW200V-PV 448.96 GYW200V-CP 608.84 GYW200V-PP 488.90
 3 GYW300V-PV 602.48 GYW300V-CP 731.04 GYW300V-PP 591.62
 4 GYW400V-PV 842.15 GYW400V-CP 1,029.19 GYW400V-PP 819.78
 Series “GX” (Single Cylinder Wall) Series “GY” (Double Cylinder Wall)
 Pipe PVC Natural Polypro PVC Natural Polypro
 Size Item # Price Item # Price Item # Price Item # Price
 1
⁄2 GX050V-PV $152.75 GX050V-PP $182.88 GY050V-PV $184.89 GY050V-PP $225.08
 3
⁄4 GX075V-PV 162.93 GX075V-PP 192.93 GY075V-PV 194.94 GY075V-PP 235.12
 1 GX100V-PV 173.11 GX100V-PP 219.05 GY100V-PV 205.99 GY100V-PP 257.23
 11
⁄4 GX125V-PV 213.86 GX125V-PP 275.32 GY125V-PV 262.27 GY125V-PP 335.61
 11
⁄2 GX150V-PV 234.29 GX150V-PP 303.46 GY150V-PV 296.42 GY150V-PP 372.80
 2 GX200V-PV 274.94 GX200V-PP 380.83 GY200V-PV 348.66 GY200V-PP 459.20
 3 GX300V-PV 498.99 GX300V-PP 581.79 GY300V-PV 630.02 GY300V-PP 809.90
NOTE: For streamers add “S” and $24.83 for 1
⁄2"–1", or $80.70 for 11
⁄4"–3" size (ex. GY300V-PV-S – $642.25). For Teflon® and PVDF body
materials consult factory.
PVC (Call for other materials)
Series
GYW
Series
GX & GY
Series GX and GY Sight Glasses
ADVANTAGES
n Large 360° viewing area
n Series “GY”and “GYW” have double wall construction for
maximum safety
n Full flow design (no corners to collect debris)
n Wide choice of select plastic materials to assure maximum
chemical compatibility
n Little or no maintenance required
130
1
Installation Note: see page 103.
Plasto-O-Matic Chemical Flow and Level Indicators offer a
safe and economical means of indicating flow, clarity, or
exact level of extremely corrosive and ultra-pure liquids.
MATERIALS OF CONSTRUCTION
A wide choice of plastic indicator end materials is offered to assure
maximum chemical compat ibility. Ends on Series “GX” indicators
are PVC (TYPE 1, GRADE 1 Polyvinyl Chloride) and Polypropylene.
Ends on Series “GY” indicators are either PVC, Polypropylene or
Teflon. Ends on Series “GYW” indicators are PVC, CPVC
(Chlorinated Polyvinyl Chloride), Polypropylene, Teflon or Kynar.
Standard O-ring seals on Series “GX” indicators are either
Buna-N or Viton. On Series “GX”, “GYW” indicators Viton
O-rings are standard. EPDM are available.
Stainless steel fasteners are standard on all flow indi cators.
The transparent inner cylinder walls used in the Series “GY”,
“GYW” indicators are Pyrex. The transparent outer cylinder
walls used in all PLAST-O-MATIC indicators are high impact
strength acrylic.
 Item # Description Price
LP95-1001 Polyethylene $21.16
LP95-6001 Polypropylene 21.16
LP95-5001 PVDF 42.31
Non-Intrusive Capacitance Mounting Bracket
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 100
100_100 3/30/14 12:32 PM Page 100
Item # Description Price
LC95-2001 Power Supply, 100-240 VAC, 24 VDC @ 0.45A, 35mm Rail $221.23
Optional: MicroSD card expandable up to 1 GB (Retail), NA
Level Control
Switch-Pro™ LCxx
FEATURES
n Graphic tank display for better process and machine visualization
n Takes less space and is more affordable than seperate PLC and Operator Interfaces
n First with removable MicroSD™ Memory
n Data logging using built-in MicroSD™ mass data storage
n Small enough to
fit in the palm of
your and (only
3.75" square)
ORDERING NOTES
1 Select the best configuration based upon your control requirements. The
following are the typical applications for each type:
LC40: High or low level switch
 LC41: Automatic fill or empty
 LC42: Automatic fill or empty with high or low level switch
2 To factory configure for 240 VAC, place an E at the end of the P/N:
(ie: LC40-1001-E).
3 For field mount installation in a NEMA 4X polycarbonate windowed
enclosure, order the LM94-1001 (single controller box) for $227 or the
LM95- 1001 (two controller box) for $342.
4 To order the CE configuration, place CE at the end of the P/N: (ie: LC42-
1001-CE) and add $30.
ORDERING NOTES
1 For field mount installation in a nema 4x windowed polycarbonate box, order
the lm94-1001 (single controller) or the lm95-1001 (two controller) enclosure.
As Low As Quick Spec
$
841 93
Dimensions:
Weight:
Cut-out:
Max panel thick:
Supply volatge:
Num. of channels:
Input ranges:
Num. of ouputs:
Type:
Num. of commons:
Max. output current:
Max. output voltage:
Max. switched power:
Oper. Temp:
Environmental:
Enclosure rating:
Rel. Humidity:
Intern. Mmmory:
Opt. memory Card:
Logic scan rate:
Graphics / text:
Display tech.
Pixels count:
Terminal type:
Certifications:
3.7" x 3.7" x 2.5"
12.5 oz (0.354 kg)
3.622" x 3.622"
5 mm
10-30 VDC
4
4-20 mA
6 relays
Mechanical contact
6
3A at 250 VAC resistance
275 VAC, 30 VDC
1250 VA, 150 W
F: 32° to 122° (C: 0° to +50°)
F: 32° to +122° (C: 0° to 50°)
NEMA 4X
5 to 95% non-condense
256 KB
Up to 1 GB
1.2 mS/K
Yes
Backlit LCD
128 x 64
Screw type, 5 mm rem.
CE, UL
A compact all-in-one solution with controller,
graphics and removable mass storage for
industrial applications starting below the cost
of a micro PLC plus operator interface. The
commander series is small enough to fit in
the palm of your hand, and includes a
graphical operator interface and Removable
Mass Data Storage. One of the first industrial
products to include support for the latest
standard in removable memory, MicroSD™.
Capable of 1 GB of storage, you can use this
additional memory to store process data,
machine recipes and application files.
ORDERING LC52-1001
DIMENSIONS
F6
6 MNO
F7
7 PRS
F8
8 TUV
F9
9 WXY
F10
0
F1
1 QZ
F2
2 ABC
F3
3 DEF
F4
4 GHI
F5
5 JKL
ESC ENTER
+/-
.
3.780" (96 mm)
3.780"
(96 mm)
(I1)
J1
0V A4 A3 A2 A1 0V H1 I8 I7 I6 I5 I4 I3 I2 I1
MJ2
MJ1
2.264"
(57.5 mm)
ORDERING LC -1001
Classification (1)(2)
0 General purpose
1 Isolation
Contact(s) / Input(s) (3)
0 1 Relay / 1 sensors
1 1 Latching relay / 2 sensors
2 2 Relays (1 latching) / 3 sensors
0 0
ORDERING LI90- 001
Sensor Inputs / Outputs
1 4 Inputs / 6 relays
2 2 Inputs / 2 repeaters
1
Commander™ LI90 Multi-Tank Level Controller
Available in general purpose classification,
the level controller is offered in three configurations
for pump and valve control.
The LC40 accepts one level sensor input
and provides one 10A relay. The LC41
accepts two level sensor inputs and provides
one latching 10A relay for automatic
fill or empty control. The LC42 accepts
three level sensor inputs with one latching
10A relay output for automatic fill or
empty control, and a second non-latching
10A relay for high level alarm or low level
alarm. For field mount installation, add a
single or dual indicator NEMA box.
Compatible with the; LU10, LZ12, LV10,
LP15, LO10, LP50, LV35/35, LV20,
LH25/35
n Fail-safe relay control of pumps or valves with 0-60 second delay
n Optional built-in intrinsic safety barriers for hazardous applications (LC9X)
n Easy setup with LED indicators for sensor, power and relay status
n 35 mm DIN rail mount Polypropylene enclosure with removable terminal strips
n Invert switch changes relay state from
NO to NC without rewiring
n Mounts easily in control panel
n Connects to any Flowline level switch
n Interfaces directly with any horn, buzzer,
valve, etc.
n Use LC_1, LC_2 version for automatic
fill/empty operations
The general purpose controller provides
single tank level indication with 2 relays,
1-3 set points and an isolated analog
repeater. Relay 1 is configurable on a
single set point. Relay 2 can be configured
on a single set point or latched on
two set points for automatic fill or empty
control. Package the controller with any
of our level transmitters. The NEMA 4X
polycarbonate enclosure is a great choice for field mount installations
and comes complete with a DIN rail mounting kit.
Compatible with the: LU28, DL14, LU83, LU20, LV55, LD32
n 3.5 digit LED display indicates level in custom engineering units
n Fail-safe relay control of pumps or valves with 0-60 second delay
n Easy set up with push button calibration for span, display and relay set points
n 35 mm DIN rail mount polypropylene enclosure with removable terminal strips
n Invert switch changes relay state from NO to NC without rewiring
n Simple controller for operating 2 alarms or 1 auto fill/empty with alarm
n Bar graph provides instant confirmation of transmitter’s operational performance
n Lock-out feature prevents inadvertent button pushing from changing settings
DataPoint™ LC52 Level Controller
Starting At
$
165 78
NEW
Installation Note: see page 103.
Installation Note: see page 103.
Installation Note: see page 103.
Price
$
291 97
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 101
101_101 3/30/14 12:37 PM Page 101
Level Control
ORDERING DL-14
Process mount (1)
0 NPT (US)
1 G (Metric)
Fob User Interface (2)
0 Without Fob
1 With Fob
FEATURES
n Setup is fast and simple
with push button calibration
and LCD display

n Offered in
three measurement
ranges up to 10m
with 2" transducer
n 6-segment LCD display indicates level in
inch or centimeter values
n 7.6 cm minimum beam width for applications
with restricted space
n PC/ABS enclosure rated NEMA 4X with
rugged PVDF transducer
n Fail-safe intelligence with diagnostic
feedback for easy troubleshooting
Quick Spec
n Range: LU80: 4" to 9.8'
 (10 cm to 3m)
 LU81: 4" to 16.4'
(10 cm to 5m)
 LU83: 8" to 26.2'
 (20 cm to 8m)
 LU84: 12" to 32.8'
 (30 cm to 10m)
n Resolution: LU81/83: 0.039" (1 mm)
LU84: 0.078" (2 mm)
n Beam width: 3" (7.6 cm) dia.
n Dead band: LU81: 4" (10 cm)
 LU83: 8" (20 cm)
 LU84: 12" (30 cm)
n Display type: LCD, 6-digit
n Display units: Inch, cm or percent
n Supply voltage: 12-28 VDC
n Loop resist.: 500 ohms @ 24 VDC
n Signal invert: 4-20 mA, 20-4 mA
n Fail-safety: Selectable 4mA, 20mA,
 21 mA, 22 mA or hold
n Process temp.: F: -4° to 140°
 C: -20° to 60°
n Enclosure rating: NEMA 4X (IP65)
n Enclosure vent: Water tight membrane
n Trans. material: PVDF
n Process mount: 2" NPT (2" G)
n Mount. gasket: Viton®
n Conduit entrance: Dual, 1
⁄2" NPT
n CE compliance: EN 61326 EMC (pending)
Ordering Notes: 1) For installation on open tanks, order the LM50-1001 (2" NPT) or LM50-1061 (2" G)
side mount bracket. 2) For a liquid tight cable connection, order the LM90-1001 connector.
EchoSpan™
FOB USB®
The Fob USB interface
tool (LI99-1001) and WebCal are necessary to
change EchoSonics from the factory configuration.
One Fob will configure all EchoSonics.
Flowline introduces EchoPod, an innovative level sensor that replaces
floats, conductance and pressure sensors that fail due to dirty, sticking
and scaling media in small tanks 49.2” (1.25 m) or less.
EchoPod, a general purpose sensor, combines noncontact switch,
controller and transmitter capabilities in one package. Combining 4
relays, 4-20 mA output and pump/valve control in one small sensor
allows EchoPod to be your total solution. Maintenance free,
EchoPod reduces tank system hardware through simplicity and consolidation.
Additionally, EchoPod is well suited for corrosive and dirty
applications with its non-metallic housing and transducer. EchoPod provides
a total solution for fluid handling and automation. The time to
“Think Small and Win Big” is now, and it’s with EchoPod.
n Provides switch/controller/transmitter capabilities
n Replacement of multi-point float, conductivity and
pressure level switches
n WebCal, an innovative PC user interface that
provides fast and accurate configuration
n Compact sensor with 2" dead band and beam width
optimized for small tank applications 49.2" or less
Quick Spec
Range:
Accuracy:
Resolution:
Beam width:
Dead band:
Supply voltage:
Loop resistance:
Consumption:
Signal output:
Contact type:
Loop fail-safety:
Relay fail-safety:
Hysteresis:
Configuration:
Temp. comp.:
Temperature:
Pressure:
Enclosure:
Encl. material:
Strain relief mat.:
Trans. material:
Cable length:
Cable jacket mat.:
Process mount:
Mount. gasket:
Classification:
Approvals:
49.2" (1.25 m)
0.125" (3 mm)
0.019" (0.5 mm)
2" (5 cm)
2" (5 cm)
24 VDC (loop)
400? max
35 mA maximum
4-20 mA , two-wire
(when loop powered)
(4) SPST relays 1A
4 mA, 20 mA, 21 mA,
22 mA or hold last
Power loss: Hold last
Power on: Open, close or hold last
Selectable
WebCal® PC Windows®
software interface
Automatic over range
F: 20° to 140° (C: -7° to 60°)
Atmospheric
NEMA 4X encapsulated,
corrosion resistant & submersible
PC/ABS FR
Santoprene
PVDF
48" (1.2 m)
Polyurethane
1" NPT (1" G)
Viton®
General purpose
CE
Quick Spec
Range:
Accuracy:
Resolution:
Beam width:
Dead band:
Memory:
Supply voltage:
Consumption:
Loop resist.:
Signal output:
Signal invert:
Configuration:
Fail-safety:
Process temp.:
Temp. comp.:
Ambient temp.:
Pressure:
Enclosure rating:
Encl. material:
Trans. material:
Cable jacket mat.:
Cable type:
Cable length:
Process mount:
Mount. gasket:
Classification:
Compliance:
Approvals:
LU27: 4" to 8.2' (10 cm to 2.5 m)
LU28: 8" to 24.6' (20 cm to 7.5 m)
LU29: 8" to 32.8' (20 cm to 10 m)
± 0.2% Range
LU27: 0.019" (0.5 mm)
LU28/29: 0.079" (2 mm)
LU27: 2" (5 cm) dia.
LU28/29: 3" (7.6 cm) dia.
LU27: 4" (10 cm)
LU28/29: 8" (20 cm)
Non-volatile
24 VDC
0.5W
500? Ohms @ 24 VDC
4-20 mA, two-wire
4-20 mA or 20-4 mA
WebCal® PC Windows® USB 2.0
4 mA, 20 mA, 21 mA, 22 mA
or hold last
F: -4° to 140° (C: -20° to 60°)
Automatic
F: -31° to 140° (C: -35° to 60°)
MWP = 30 PSI
Type 6P encapsulated,
corrosion resistant & submersible
Polycarbonate
PVDF
Polyurethane
4-cond., shielded
10' (3m)
LU27: 1" NPT (1" G)
LU28/29: 2" NPT (2" G)
Viton®
General purpose
RoHS
CE, cFMus
APPLICATION
Provides non-contact level measurement
up to 32' or 10m, and is ideally
suited for challenging ultrapure, corrosive or
waste liquids. Push button calibrated, the
transmitter is broadly selected for atmospheric
bulk storage, day tank and waste
sump applications. Media examples include
wastewater and sodium hydroxide.
Models LU80, LU81, LU83, LU84
From Only
$
55003
From Only
$
29616
Ordering Notes:
1) The NEMA 4X includes a standard 10' (3m) cable. To special order a 15' max (7.6m) cable, place the cable length at the end of the part number (ie: LU28-00-15).
2) For installation on open tanks, order the LM50-1001-1 (1" NPT) or LM50-1061-1 (1" G) side mount bracket; or order the LM50-1001 (2" NPT) or LM50-1061 (2" G)
side mount bracket. 3) WebCal is a free download from www.flowline.com/webcal (Windows® XP Compatible).
Ordering Notes: 1) EchoPod can not be con gured without the Fob USB interface tool (LI99-1001) and
WebCal. One Fob will con gure all EchoPods. 2) WebCal is a free download from www.flowline.com/webcal
(Windows® XP Compatible).
EchoPod® Ultrasonic Level Switch, Controller & Transmitter
The general purpose two-wire ultrasonic transmitter provides
non-contact level measurement up to 32.8' (10 m), and is
well suited for challenging ultrapure, corrosive, slurry or waste liquids.
The transmitter is broadly selected for atmospheric bulk storage,
day tank, waste sump, process vessel, IBC tote, 55-gallon drum and
waste sump applications. Media examples include acetic acid and resin.
FEATURES
n WebCal, an innovative PC user interface that
provides fast and accurate configuration.
n Optimize sensor placement with
unmatched beam width for applications
with restricted space.
n Industry leading miniature dead band
maximizes the filling capacity of vessels.
n Polycarbonate enclosure rated NEMA 4X
with PVDF transducer.
n Offered in 3 measurement ranges up to 32.8' (10 m).
EchoSonic II™ Ultrasonic Level Transmitter
ORDERING LU2 -
Sensor range/size (1)
7 2.5m (8.2')
3 5.5m (18.0')
8 7.5m (24.6')
9 10m (32.8')
Process mount (2)
0 NPT (US)
1 G (Metric)
Fob USB Adapter
0 Without Fob
1 With Fob
7 0 0
0 0
ORDERING LU8 -51 1
Sensor range
0 3m (9.8')
1 5m (18.0')
3 8m (26.2')
4 10m (32.8')
Process mount (1)(2)
0 NPT (US)
6 G (Metric)
0 0
Installation Note: see page 103.
Installation Note: see page 103.
Installation Note: see page 103.
From Only
$
46962
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 102
102_102 3/30/14 12:39 PM Page 102
Some Accessories For FLOWLINE Installations
Level Control
DataView Advanced Meter & Controller
EchoSwitch II™ Multi-Point Untrasonic Level Switch
ORDERING NOTES
1 For installation on open tanks,
order the LM50-1001-1 (1"
NPT), LM50-1061-1 (1" G)
LM50-1001 (2" NPT) or LM50-
1061 (2" G) side mount bracket.
ORDERING NOTES
1 For field mount installation in
a NEMA 4X polycarbonate
windowed enclosure, order
the LM92-1001 (single meter
box) or the LM93- 1001 (two
meter box).
ORDERING LU7 -50 5
Sensor Range/Size
7 8.2' (2.5 m)
4 18.0' (5.5 m)
8 24.6' (7.5 m)
Process Mount
0 NPT
6 G Thread
ORDERING LI55-1 1
Configuration (1)
0 Meter only
2 Meter with 2 relays
4 Meter with 4 relays
Repeater Output
0 No repeater
1 4-20 mA repeater
n Non-contact level detection with integral
3-channel relay control
n Simple digital push button configuration,
no more target calibration.
n Integrated timer for pump/valve delay
and pump alternation.
n Available in 2.5m (8.2') or 7.5m (24.6') range.
n Pump simplex, duplex and triplex options.
n 10cm miniature dead band optimizes the
filling capacity of sumps or vessels.
n Polycarbonate enclosure rated NEMA 4X
with rugged PVDF transducer
Quick Spec
APPLICATION
The general purpose meter displays
engineering units with one 4-20 mA or
0-10 VDC transmitter input channel and
is offered in three configurations with
optional 2 or 4 relays, 4 or 8 set points
and an isolated 4-20 mA repeater. Each
relay can be configured on a single set point
or latched on two set points for automatic fill or
empty control including duplexing. For field mount
installations, order the single or two meter NEMA box.
FEATURES
n 1/8 DIN enclosure with NEMA 4X faceplate and shallow depth case
n 32-point linearization function for volumetric tank measurement
n Non-volatile memory with security password protected lock out
n Isolated 4-20 mA repeater output with 40 mA internal power supply
Display type:
Decimal point:
Display output:
Display height:
LED indication:
User interface:
Linearization:
Memory:
Sensor input:
Supply voltage:
Consumption:
Sensor supply:
Repeater ouput:
Contact type:
Contact rating:
Ambient temp.:
Enclosure type:
Enclosure rating:
Enclosure mat’l:
LED, 6-digit
Floating
-99999 to 999999
Main: 0.6" high
Second: 0.46" high
Relay status
Four push button
2-32 point function
Non-volatile
(1) 4-20 mA or 0-10 VDC
transmitter
85-265 VAC @ 50-60 Hz.
20 watts max.
24 VDC +/- 5% @ 200 mA
4-20 mA, 24 VDC +/- 5%
@ 40 mA
12_1: (2) SPDT (Form C)
14_1: (4) SPDT (Form C)
3A @ 30 VDC or 250 VAC
resistive load
F: -40° to 149°
1/8 DIN panel meter
NEMA 4X (IP65) faceplate
Polycarbonate
Quick Spec
Range:
Repeatability:
Beam width:
Dead band:
LCD indication:
Configuration:
Supply voltage:
Contact type:
Contact rating:
Contact fail-safety:
Temp. comp.:
Electronics temp.:
Pressure:
Enclosure rating:
Enclosure vent:
Encl. material:
Encl: hardware:
Trans. material:
Process mount:
Mount. gasket:
Conduit entrance:
Classification:
Compliance:
Approvals:
LU77: 4" to 8.2'
LU78: 8" to 24.6'
0.25" (6.35 mm)
LU77: 2" (5 cm) dia.
LU78: 3" (7.6 cm) dia.
LU77: 4" (10 cm)
LU78: 8" (20 cm)
Level and relay status
Push button
95-250 VAC
(3) SPDT relays
60 VA, 1A max
Programmable /selectable
Automatic
F: -7° to 140° (C: -20° to 60°)
MWP = 30 PSI
NEMA 4X (IP65)
Water tight membrane
Polycarbonate, UV
Brass and stainless
PVDF
LU77: 1" NPT (1" G)
LU78: 2" NPT (2" G)
Viton®
Dual, 1
⁄2" NPT
General purpose
RoHS
CE (Pending)
As Low As
$
63462
As Low As
$
42731
FEATURES
L1 L2
POWER
EchoSwitch II™
UP DOWN
SELECT
FAST
RELAY 1 RELAY 2 RELAY 3
EchoSwitch II Interface
LU77
LU78
7 0
0 0
www.fwwebb.com/plastics
The general purpose ultrasonic switch and controller provides non-contact level detection up to 24.6'
(7.5 m) with 3 SPDT 60 VA 1A relays. EchoSwitch II features digital push button configuration, eliminating
target calibration. Each relay can be configured on a single set point to control pumps,
valves or alarms. In addition, all 3 relays can be simplexed, duplexed or triplexed. EchoSwitch
II now features an integrated timer with pump/valve delay and timed pump alternation. The
switch is well suited for a broad range of corrosive, waste and slurry type media. EchoSwitch II
is broadly selected for atmospheric day tanks, pump lift stations and waste sump applications.
Item # Description Price
Threaded Reducing Bushing
LM52-1400 2" NPT Thrd x 1" NPT Thrd (Sch. 40),PVC $10.77
LM52-2400 3" NPT Thrd x 2" NPT Thrd (Sch. 40),PVC 23.70
LM52-1800 2" NPT Thrd x 1" NPT Thrd (Sch. 80),PVC 29.62
LM52-2800 3" NPT Thrd x 2" NPT Thrd (Sch. 80),PVC 46.53
LM52-3800 4" NPT Thrd x 2" NPT Thrd (Sch. 80),PVC 93.07
Socket Reducing Bushing
LM52-1410 2" Slip x 1" NPT Thread (Sch. 40), PVC 6.77
LM52-2410 3" Slip x 2" NPT Thread (Sch. 40), PVC 10.15
LM52-3410 4" Slip x 2" NPT Thread (Sch. 40), PVC 18.62
LM52-2810 3" Slip x 2" NPT Thread (Sch. 80), PVC 76.15
LM52-3810 4" Slip x 2" NPT Thread (Sch. 80), PVC 135.08
Item # Description Price
Bulkhead Fitting
LM52-2890 2" NPT x 2" Slip, PVC $49.95
Flange
LM52-1850 1" NPT Flange - 150# (Sch. 80), PVC 34.89
LM52-2850 2" NPT Flange - 150# (Sch. 80), PVC 49.95
Side Mount Bracket
LM5050-1001-1 2" NPT Bracket, PP w/Bush 39.86
LM50-1001 2" NPT Bracket, PP 29.86
Modules – LI55 Level Controller
LI56-1011 4-20mA Repeater 110.17
LI56-1201 2 Relay (No Repeater) 139.31
LI56-1211 2 Relay w/ 4-20mA Repeater 177.69
LI56-1401 4 Relay (No Repeater) 170.00
LI56-1411 4 Relay w/ 4-20mA Repeater 245.39
For optimum performance, install the level sensor using the below recommended or direct equivalent fittings.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 103
103_103 3/30/14 12:42 PM Page 103
Level Control
The general purpose two-wire pressure transmitter is offered in two
configurations for different liquid types and provides contact level
measurement up to 46' or 14m of water column. Select the LD31 for
clean or relatively clean water, light weight oils and diluted chemical
media. Application examples include ground water, ponds and wells.
Select the LD32 for dirty, sludge or slurry media. Application examples
include sewer or storm pump lift stations, storage and treatment with
surface foam or debris where ultrasonic cannot be applied
DeltaSpan™ Submersible Pressure Transmitter
DeltaSpan Side Mounted Pressure Transmitter
EchoPod® 2.5m Ultrasonic Level Switch, Controller & Transmitter
FEATURES
n Corrosion resistant 316 SS transducer with
polyurethane or ETFE cable jacket
n 270 pound tensile strength cable, maintenance
free breather tube and vent filter
n Rugged LD32 model features large clog and
damage resistant diaphragm design
Quick Spec
Range:
Accuracy:
Supply voltage:
Max. loop resist.:
Signal output:
Calibration:
Process temp.:
Temp. comp.:
Proof pressure:
Burst pressure:
Process mount:
Enclosure rating:
Probe material:
Cable material:
Cable type:
Classification:
-S_01: 0 to 5 psi (0.34 bar)
 0 to 11' (0 to 3.4m) wc
-S_11: 0 to 10 psi (0.69 bar)
 0 to 23' (0 to 7m) wc
-S_21: 0 to 15 psi (1.0 bar)
 0 to 34' (0 to 10.4m) wc
-S_31: 0 to 20 psi (1.38 bar)
 0 to 46' (0 to 14m) wc
± 0.25% of full span
13 to 30 VDC
900 Ohms @ 30 VDC
4-20 mA, two-wire
None, fixed span
F: 0° to 200° (C: -10° to 93°)
Automatic
2 x full span
> 35 x full span
1
⁄2" NPT
NEMA 6 (IP67)
LD31: 316 SS, 316L SS
& Buna-N w/PVC nose
LD32: 316 SS, 316L SS
& Buna-N
S1_1: Polyurethane
S2_1: ETFE
2-conductor, shielded
w/vent tube
General purpose
Quick Spec
Range:
Accuracy:
Supply voltage:
Max. loop resist.:
Signal output:
Calibration:
Process temp.:
Temp. comp.:
Proof pressure:
Burst pressure:
Process mount:
Enclosure rating:
Probe material:
Termination:
Cable material:
Cable type:
Classification:
CE compliance:
-S0_1: 0 to 5 psi (0.34 bar)
0 to 11' (0 to 3.4m) wc
-S2_1: 0 to 15 psi (1 bar)
0 to 34' (0 to 10.4m) wc
-S4_1: 0 to 30 psi (2 bar)
0 to 69' (0 to 21.1m) wc
±0.25% of full span
13-30 VDC
1300 Ohms @ 30 VDC
4-20 mA, two-wire
None, fixed span
F: 0° to 200° (C: -18° to 93°)
Automatic
2 x full span
> 35 x full span
1
⁄4" NPT
NEMA 4X (IP65)
316 SS & 316L SS
-S_01: 3' (1m) cable
-S_11: Junction box with
1
⁄2" NPT conduit connector
Polyurethane
2-conductor, shielded
General purpose
CE: EN55022, EN55024,
EN61000
Quick Spec
Range:
Accuracy:
Resolution:
Beam width:
Dead band:
Supply voltage:
Loop resistance:
Consumption:
Signal output:
Contact type:
Loop fail-safety:
Relay fail-safety:
Hysteresis:
Configuration:
Temp. comp.:
Process temp.:
Pressure:
Enclosure:
Encl. material:
Strain relief mat.:
Trans. material:
Cable length:
Cable jacket mat.:
Process mount:
Mount. gasket:
Classification:
Approvals:
Compliance:
98.4" (2.5m)
± 0.2% range
0.019" (0.5mm)
2" (5cm)
4" (10cm)
24VDC (loop)
400 ? max
0.5W
4-20 mA two-wire
(when loop powered)
(4) SPST relay 1A
4 mA, 20 mA, 21 mA,
22 mA or hold last
Power loss: Hold last
Echo loss: Open, close, hold last
Selectable
WebCal® PC Windows® USB 2.0
Automatic over range
F: -20° to 140° (C: -7° to 60°)
MWP = 30 PSI
Type 6P encapsulated,
corrosion resistant & submersible
PC
Santoprene
PVDF
4' (1.2m)
Polyurethane
1" NPT (1" G)
Viton®
General Purpose
CE
RoHS
ORDERING NOTES
1 For integral conduit termination and process mount, order the LD90-1001
(2" NPT) or LD90-1061 (11
⁄2" G) installation kit. Each kit includes a PP
junction box rated NEMA 4X, PP plug fitting and nylon cable connector.
ORDERING NOTES
1 To special order a 9' (2.7m)
sensor cable (-S_01 only), place
the cable length at the end of
the part number (ie: LD30-
S201-9').
ORDERING NOTES
1 EchoPod cannot be configured without the Fob USB interface tool (LI-99-
1001) and WebCal. One Fob will configure all EchoPods.
2 WebCal is a free download from www.flowline.com/webcal (Windows®
XP compatible).
ORDERING LD3 -S 1
Liquid type (1)
1 Water & light oil
2 Wastewater & slurry
Cable jacket
1 Polyurethane
2 ETFE
Sensor range
0 0 to 5 psi (0 to 0.34 bar)
1 0 to 10 psi (0 to .69 bar)
2 0 to 15 psi (0 to 1.0 bar)
3 0 to 20 psi (0 to 1.38 bar)
ORDERING LD30-S 1
Sensor range
0 0 to 5 psi (0 to 0.34 bar)
2 0 to 15 psi (0 to 1 bar)
4 0 to 30 psi (0 to 2 bar)
Termination package (1)
0 Cable
1 Conduit Junction Box
Starting At
$
59231
Starting At
$
253 85
LD32 LD31
The general purpose two-wire pressure transmitter
is offered in two termination packages
and provides contact level measurement up
to 69' or 21.1m of water column. Select the
-S_01 for cable termination or the -S_11 for
conduit termination with an integral junction
box. The transmitter is best applied with clean
liquid or gas media including water, oil and air.
Application examples include irrigation equipment,
pumping systems and compressors.
FEATURES
n Corrosion resistant 316 SS
transducer with cable or junction
box termination
n Small, rugged transducer is ideal
for fluid handling equipment
The general purpose, ultrasonic sensor provides non-contact level detection
up to 98.4" (2.5m) with 4 SPST 60 VA 1A relays and a two-wire 4-20
mA level measurement output. Each relay can be configured on a single
set point alarm or latched on two sets for automatic fill or empty in simplex
or duplex control modes with fail-safe logic. The embedded
controller can replace external control hardware. The sensor is
well suited for a wide range of corrosive, sticky or dirty type
media. EchoPod is broadly selected for day tanks, sumps, IBC
totes, lift stations and mini-bulk storage applications.
To configure EchoPod, download our free WebCal
software and purchase one USB interface tool.
n Multi-function sensor provides 4-20 mA measurement, switch and control functions. Compact
sensor with 2" beam width and 4" dead band optimized for small tank applications
n Four 1A relays programmable for switch or advanced pump or valve control and fail-safety
n Rugged PVDF transducer and polycarbonate
enclosure rated 6P for corrosive applications
n Control / switch point functions include:
 2 pumps with 2 alarms
 1 pump with 3 alarms
 2 pumps (lead-lag) with 2 alarms
 2 pumps (duplexing) with 2 alarms
 4 independent switch point alarms
ORDERING DL24-
Process mount
0 NPT (US)
1 G (Metric)
Fob USB interface (1) (2)
0 Without Fob
1 With Fob
Starting At
$
380 77
1 1 0
0 0
0 0
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 104
104_104 3/30/14 12:43 PM Page 104
RS2
RS1
RS1PLT
DEB1/2 DEB1/2CTS DEB1/2CTS DEB1IPS
DEB2 DEB4
 Item # Nominal Pipe Capacity Price
DEB0 Unlimited $4.79
DEB1IPS 1
⁄2", 3
⁄4", 1" 67.97
DEB1CTS 1
⁄2", 3
⁄4", 1" 67.97
DEB1-2IPS 11
⁄4", 11
⁄2", 2" 79.37
DEB1-2CTS 11
⁄4", 11
⁄2", 2" 79.37
DEB2 1
⁄8" to 2" 15.79
DEB3 Unlimited 9.97
DEB4 11
⁄4", 11
⁄2", 2", 21
⁄2", 3", 4" 47.39
DEB1B Replacement Blades DEB1 IPS & CTS 13.97
DEB1-2B Replacement Blades For DEB1-2 IPS & CTS 14.53
DEB3B Replacement Blades For DEB3 1.87
Strap Wrenches
Provides gripping power without scratching or deforming
plastic or polished metal pipe.

Item #
 Pipe Tube Handle
 Weight Price Capacity Capacity Length O.D.
SW12A 1
⁄8" - 2" 3.5" 12" 2 lbs. $36.66
SW12A30 1
⁄8" - 2" 7.5" 12" 2.2 lbs. 42.04
SW18A 1" - 5" 6" 18" 3.3 lbs. 73.60
SW24A 2" - 12" 14" 24" 5.7 lbs. 88.37
Meets Federal Specifications GGG-W-00651a and Amendment 1; Type V Fig. 7
Scissor Shears
Scissor shears squeeze together for fast cutting of thin wall
and small diameter plastic, rubber, or nylon tubing. Rotate
shears around tubing while squeezing handles together for
best cut. Replacement Teflon® coated blades available.
Plastic Pipe Saws
Designed for efficiency and longevity when cutting highly
abrasive ABS and PVC pipe. Design makes blade change fast
and easy. Simultaneously cuts forward and backward…a 50%
productivity improvement.
 Item # Item Code Capacity Length Price
PPS12 04512 3" 16" $19.56
PPS18 04510 4" 22" 21.95
PPS20 04720 6" 20" 30.53
PPS24 04724 8" 24" 31.98
 Item # Item Code Capacity Length Price
SC1SS 04169 1.3" 8.0" $17.64
SC1SL 04272 1.3" 8.3" 19.27
SC125SL 04273 1.7" 8.3" 31.04
SC1 04174 1.3" 8.3" 16.78
SC125 04178 1.7" 8.3" 18.32
Tools & Accessories
As Low As
$
1956
From Only
$
3666
Item # Kit Contents Price
TC3-636SK TC3QPVC, DEB4, IC1SL $277.31
TC4-636SK TC4QPVC, DEB4, IC1SL 296.32
TC2-PPSK TC2QPVC, DEB4, DEB1IPS 260.62
TC3-PPSK TC3QPVC, DEB4, DEB1IPS 277.31
SC1SS SC125SL SC1
PPS20
PPS24
PPS18
PPS12
TC8QP
Quick Release Cutters
Reed quick-acting tubing cutters are the industry standard;
most rec ommended by plastic pipe companies and imitated
by other manufac turers. They are the most practical cutters
for small, medium, and large diameter work.
 Item # O.D. Capacity Length Weight Price
 TC1QPVC 1
⁄8" - 15
⁄16" 6" .5 lb. $58.95
 TC2QPVC 1
⁄4" - 25
⁄8" 8" 1 lb. 97.68
 TC3QPVC 3
⁄8" - 31
⁄2" 11" 2.5 lbs. 119.25
 TC4QPVC 17
⁄8" - 41
⁄2" 12" 2.8 lbs. 138.97
 TC6QPVC 4" - 65
⁄8" 15" 3.5 lbs. 175.08
 TC6Q680PVC 4 - 65
⁄8" 15" 3.5 lbs. 175.08
 TC8QP 61
⁄4" - 10" 26" 8 lbs. 642.13
TC4QP
 Item # Item Code Capacity Length Price
 RS1* 04176 1.66" 8.3" $79.22
 RS1PLT 04175 1.66" 8.3" 90.93
 RS2 04177 2.4" 17.0" 151.43
 RS7290 04182 2.4" 13.25" 151.43
 RSP1* 04276 1.66" 8.75" 151.43
* Actual O.D. 15
⁄8"
Item # Item Code Replacement Blades Price
RS1B 94175 RS1 Hardened Steel Blade $29.09
RS1BPLT 94180 RS1PLT Nickel-Plated Steel Blade 31.26
RS2B 94176 RS2 Hardened Steel Blade 39.37
RS7290B 94555 Blade fits Reed RS7290 and Wheeler® 7290 52.71
RSP1B 94276 RSP1 Stainless Steel Blade 29.09
Item # Item Code Replacement Blades Price
SC1B 94170 High Carbon Steel Feflon®-Coated Blade $5.84
 Fits SC1, SC1SL, SC1SS
SC1BSS 94187 Stainless Steel Blade 6.60
SC125B 94169 High Carbon Steel Feflon®-Coated Blade 6.64
 Fits SC125, SC125SL
Ratchet Shears
Ratchet shears with hardened steel blades are ideal for cutting
PVC, PE, PP, PEX, and ABS pipe. For CPVC, use the
RS1PLT, RS7290, or RSP1 ratchet shears because of blade
thinness and finish.
RS7290 RSP1
 O.D. Capacity Cutter Wheel
Item # Actual In. Actual Ø mm Copper PE* PVC* Price
REDTC1.6Q 1
⁄4 - 15
⁄8 6-42 O OP2 1-2PVC $54.82
REDT20 5
⁄8 - 21
⁄8 15-54 O OP2 1-2PVC 72.62
REDOP2 Cutting wheel for REDT20 & REDTC1.6Q 13.01
 Cuts ABS, PE, PEX, PP, PEX/AL/PEX
*To cut plastic pipe, order recommended cutter wheel for plastic separately.
Tubing Cutters
Solutions Kit
with Case
DEB3
DEB0
Plastic Deburring Tools
DEB0: For internal burrs in copper tubing. Features long-lasting
high speed steel blades, aluminum handle, and pocket
clip
DEB1IPS: Chamfer & deburrs (iron pipe size) at a 15 degree
angle, 3/32" cut, for PVC, CPVC, PE, ABS, PP.Made of a
knurled Durable aluminum body.
DEB1CTS: Chamfer & deburrs (copper tube size) at a 15
degree angle, 3/32" cut, for PVC, CPVC, PE, ABS, PP.Made of
a knurled Durable aluminum body.
DEB1-2IPS: Chamfer & deburrs (iron pipe size) at a 15
degree angle, 3/32" cut, for PVC, CPVC, PE, ABS, PP.Made of
a knurled Durable aluminum body.
DEB1-2CTS: Chamfer & deburrs (copper tube size) at a 15
degree angle, 3/32" cut, for PVC, CPVC, PE, ABS, PP.Made of
a knurled Durable aluminum body.
DEB2: Deburrs inner & out side of pipe, for PVC, CPVC, ABS
PP, PE. Made from steel and a cone design.
DEB3: Deburrs with plastic handle with replacement blades
PVC, CPVC, ABS PP, PE. Made from steel and a cone design.
DEB4: Deburrs while producing a 3/32" 15° chamfer in seconds.
Good for PVC, CPVC, ABS.
These kits contain
tools required to install
a perfect joint every time
to prevent failures between pipe and fitting.
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 105
105_105 3/30/14 12:46 PM Page 105
PLAS In-Line Rotary™ Cutters (FOR PVC OR PE)
Tools & Accessories
Exact PipeCut Pipe
Cutting System
package contents:
n PipeCut Shoulder Bag
n Exact PipeCut saw
n Cutting Supports - 4pcs
n Operating Inst. Booklet
n Allen keys 5 mm and 2
mm fitted to the machine
n TCT blade fit to machine
n DVD video disc containing
instructions and demos
BLADES
There are several different types of cutting blades which are
meant for different purposes available for Exact PipeCut machines:
TCT 165: Blade with tungsten carbide tips for general use.
Suitable for cutting steel, copper, aluminum and plastics.
Cermet 165: Blade with ceramic tips for heavy duty
applications, especially for cutting stainless and acid proof steel.
TCT P165: Blade with tungsten carbide tips only for cutting plastic.
Diamond X165: Heavy duty special diamond blade only to be used for cutting
cast iron and ductile pipes.
Exact Pipe Cutting System
POWER AND ACCURACY WITH A LIGHTWEIGHT
MACHINE
PipeCut 170E
Voltage 110V, 120V and 230V / 50-60 Hz
Power / Current 1100 W / 9.2A
No-Load Speed 1600 - 3500 /min
Intermittent Operation 2.5 min ON / 7.5 min OFF (S3 25%)
Blade Diameter 140mm (5.51")
Mounting Bore 62mm (2.44")
Weight 5.7kg (12 lbs)
Range of Use Ø 15mm - 170mm (0.6"- 6.7")
Max. Pipe Wall 6mm (0.31") steel, 14mm (0.55") plastics
PipeCut 400E
Voltage 110V, 120V and 230V / 50-60 Hz
Power / Current 1010W / 8.4A
No-Load Speed 4000 /min
Intermittent Operation 2.5 min ON / 7.5 min OFF (S3 25%)
Blade Diameter 148 / 150mm (5.8"/5.9")
Mounting Bore 62mm (2.44")
Weight 6.0kg (13 lbs)
Range of Use Ø 100mm - 400mm (3.9"- 15.7")
Max. Pipe Wall 25mm (0.98") cut, 22mm (0.86") bevel cut
Item # Dimensions (mm) For Materials For Machine Types
TCT 140 140 x 62 x 1.8 x 1.4 x 46 Steel, Copper, Plastics PC 170, 170E, 200, 360
Cermet 140 140 x 62 x 1.8 x 1.4 x 46 Steel, Stainless, Copper, Plastics PC 170, 170E, 200, 360
Diamond 140 140 x 62 x 2.0 x 1.8 Cast iron PC 170, 170E, 200, 360
Diamond X140 140 x 62 x 2.0 x 1.8 Cast iron, Ductile (nodular cast iron) PC 170, 170E, 200, 360
TCT165 165 x 62 x 1.8 x 1.4 x 52 Steel, Copper, Plastics PC 280E
Cermet 165 165 x 62 x 1.8 x 1.4 x 52 Steel, Stainless, Copper, Plastics PC 280E
Diamond X165 165 x 62 x 2.0 x 1.8 Cast iron, Ductile (nodular cast iron) PC 280E
TCT P165 165 x 62 x 1.8 x 1.4 x 40 Plastics (PE, PP, PVC, etc.) PC 280E
Cermet V155 155 x 65 x 1.6 x 1.4 x 58 Thin wall ventilation pipes PC V1000
TCT P150 150 x 62 x 1.8 x 1.4 x 40 Plastics (PE, PP, PVC, etc.) PC P400, 360
Cut Bevel 148 x 62 x 2/30 x 40/8 Plastics (PE, PP, PVC, etc.) PC P400
PipeCut 280E
Voltage 110V, 120V and 230V / 50-60 Hz
Power / Current 1750 W / 14.5 A
No-Load Speed I = 2900 /min, II = 3900 /min
Blade Diameter 165mm (6.50")
Mounting Bore 62mm (2.44")
Weight 9.0kg (20 lbs)
Range of Use Ø 40mm - 280mm (1.6"- 11")
Max. Pipe Wall 10mm (0.4") steel, 38mm (1.5") plastics
Powerful, lightweight and handy
PipeCut 170E can be used for cutting
both metal and plastic pipes.
Because of its adjustable speed and
steady torque feature it is ideal for
cutting stainless steel and cast iron
pipes. It offers hi-end performance
for pipe fitting professionals.
Most effective pipe cutting with the
powerful PipeCut 280E. It is ideal for
cutting metal pipes because of it's two
speed selection, automatic fuse and
torque control. It works well even with
the hardest cast-iron pipes. It is also
suitable for cutting plastic pipes because
it can cut very thick pipe walls and it
can be attached to a vacuum cleaner.
Cut and bevel plastic pipes in one
process. Unique method for plastic
pipe installations. You just need to
cut around a pipe and you get nice
15 degrees bevel at the same
time. You can use the PipeCut
P400 saw also only for cutting or
only for just to bevel plastic pipes.
Exact 170E Dual Speed Pipe Saw 1
⁄2" to 6.5"
Replacement Blades* For Material
TCT 140 Steel, Copper, Plastics
CERMET 140 Steel, Stainless, Copper, Plastics
Diamond 140 Cast Iron
Diamond X140 Cast Iron, Ductile (nodular cast iron)
Exact 280E Dual Speed Pipe Saw 11
⁄2" to 11"
Replacement Blades* For Material
TCT 165 Steel, Copper, Plastics
CERMET 165 Steel, Stainless, Copper, Plastics
TCT P165 Plastic (PE, PP, PVC, etc)
Diamond X165 Cast Iron, Ductile (nodular cast iron)
Exact P400 Single Speed Plastic Pipe Saw 4" to 14"
Replacement Blades* For Material
TCT P150 Plastic (PE, PP, PVC, etc)
Cut Bevel Plastic (PE, PP, PVC, etc)
*this machine only
Call for Price
Starting Under
$
1100 00
Starting Under
$
1100 00
 Handle length
Item # Hex Sockets In/mm Price
REDL2017 11
⁄4 + 11
⁄16 13/330 $99.37
Fits 3
⁄4" + 5
⁄8" heavy hex nuts
REDL1815 11
⁄8 + 15⁄16 13/330 99.37
Fits 3
⁄4" + 5
⁄8" standard hex nuts
REDL1817 11
⁄8 + 11
⁄16 13/330 99.37
Fits 3
⁄4" + 5
⁄8" standard hex nuts
Dual Socket
Ratchet Wrenches
 Item # Pipe Capacity Price
 PESCRAPER 2-6 in $729.65
PE
Scraper
n PE Scraper prepares the outside diameter
of PE pipe for electrofusion.
n Removes the oxidized layer and contaminates
from outside of the pipe.
n Can be used at the end or anywhere along
the length of the pipe.
n Light-weight and easy-to-use.
n Spring-loaded blade keeps consistent
pressure on the pipe to yield a smooth,
finished surface.
NEW
Rotary In-Line Rotary Large Diameter Cutter
For PVC Material For PE Material Description Price
PLAS0 PLAS0PE Pipe Cutter for 4" - 8" PVC $1,008.35
PLAS1 PLAS1PE Pipe Cutter for 6" - 12" PVC 1,093.10
PLAS2 PLAS2PE Pipe Cutter for 14" - 18" PVC 1,545.39
PLAS3 PLAS3PE Pipe Cutter for 14" - 24" PVC 1,714.90
PLAS4 PLAS4PE Pipe Cutter for 14" - 28" PVC 1,865.74
PLASB PLASPEB Replacement Blade 49.42
Note: Tool Limitations; 2" wall thickness PE up to 14" pipe, 11
⁄2" wall thickness up to 18" pipe,
1" wall thickness up to 24" pipe.
NEW
PLAS In-Line Rotary™ Cutters are excellent for
cutting 4" to 28" (110 - 800 mm) diameter
PVC or PE pipe in-trench or above ground.
Each PLAS rotary cutter needs just 6" to 8"
(153 - 203 mm) clearance around the pipe.
Outboard rollers keep the cutter aligned on
pipe, ensuring a square cut every time. The
tool’s carbide-tipped blades for PVC are longlasting
and penetrate up to a 2" wall thickness.
Each PVC cutter also can produce, in-line with
the cut, a 15° bevel on both sides of the cut.
NEW
Internal Pipe Cutter
Item # Description Price
IC34SL ¾" Minimum ID With 6" Shaft $27.98
IC1SL 11
⁄4" Minimum ID With 7" Shaft 25.67
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 106
106_106 3/30/14 12:49 PM Page 106
Tools & Accessories
COMPRESSOR
n High-quality continuous duty oil-less
rotary compressor.
n Provides 21
⁄2 cfm at 3 psi.
n Intake filter/muffler.
n Standard electrical cord with
grounded plug.
n 120 v. 60 cycle.
CONTROL PANEL
n Factory-wired separate On-Off switches
for compressor and torch — interlocked
to prevent operation of torch
without compressor.
n Com plete operating instruction on
control panel.
n Pilot light.
With a strong aluminum alloy frame, effective roller locking, and
good tool life, a smooth 15° bevel is produced on all types of plastic
pipe in about one minute. Easily adjustable for different
pipe sizes and thicknesses, with no part changes.
Laramy Model Vari-FT
SELF-CONTAINED TORCH WITH VARIABLE TEMPERATURE CONTROL
For Field and
Shop Welding
Model Vari-FT provides its own air
supply from the ambient atmosphere
making it ideal for installation, repair and
field work on hard and soft PVC and similar
thermo plastics including plexiglass,
polycarbon ate, polyisobutylene, polystyrene,
poly mide, etc.
Temperature can be steplessly regulated
with an electronic controller up to 1100°F.
Hand welding tip VFT-20 supplied.
Speed Tips for TRIANGULAR WELDING RODS Now Available!
Laramy Custom Welding Tips
Engineered stainless steel tips for all hot gas welding requirements. Laramy introduced the
High-Speed Tip and the all-purpose Combination Tip. Choose from the most complete selection
of tips in the plastics
welding industry.
Laramy Model 30-200 Compressor/Torch Outfit
NCT-1 Combination Welding & Tacking Tip A dual
purpose design that eliminates the need for separate tips on
maintenance and light fabrication work. Cuts rod at end of weld.
NR-1 Universal Round Tip For tight-corner hand welding.
NHS Universal High Speed Tip
A one-hand welding tip that is 6 to 8 times faster than conventional
tips. Cuts off rod as desired. Exclusive Laramy design
preplas ticizes work and rod simultaneously. These tips, because
of the time they save, should be used for any extensive work
on maintenance and fabrication projects. Model NHS-2 should
be used with 450 watt element or higher only. Custom speed
tips can be designed and built for special rod sizes and shapes.
$22.85
$32.51
 Pipe Capacity Weight
 Model Item # Inches Nom. Actual Ø mm lbs kg Price
 BT1 0495 11
⁄2 – 8 40–200 2.8 1.3 $242.40
 BT2 04398 11
⁄2–12 40–300 6 2.7 391.42
Item # Pipe Cap. Inches Nom. Pipe Cap. Actual Ø mm Price
Gasketed Pipe REDPPJ — — $1,207.70
REDPPJVS 4 – 16 114 – 434 656.72
Solvent Cement
Fittings Connection REDPPJFA 4 – 12 114 – 324 531.51
Item # OD Cap. Actual Ø in. OD Cap. Actual Ø mm Price
Saddles REDPPJ4S 4.50 114 $152.76
REDPPJ6S 6.625 168 181.21
REDPPJ8S 8.825 224 228.38
REDPPJ10S 10.75 273 415.67
REDPPJ12S 12.75 324 551.94
VARI-FT SPECIFICATIONS
Temperature: Variable (to 1100° F.)
Electrical: 11 OVAC, 800 watts.
Air: Self-contained supply from
 built-in blower/motor.
Controls: On/Off Switch. Stepless
 temperature control knob.
Length: 13.8"
Bevelers
$89.64
n Laramy high-speed high-production
torch with “Located Heat” design.
n 450-1300°F tempera ture range.
n Interchangeable elements.
n 12 feet of vinyl combination non-kink hose.
n Stainless steel barrel.
n Molded glass-filled nylon handle.
n Combination tip included.
n 110-120 v. 60 cycle.
Electrical Power: 120 v 60 cycle
Air Flow: From 21
⁄2 cfm at 3 psi.
Heat Range: 450 – 1300° F
Wattage: 250,350,450, 550,650 or 750 (specify)
SPECIFICATIONS
NHS-1 1
⁄8" and 5
⁄32" dia. rod
NHS-2 3
⁄16" dia. rod
NHS-3 1
⁄4 " dia. rod
Plastic Pipe Joiners With 28 to 1 leverage, it is easy for one
person to join PVC or PE pipe up to 16" gasketed or up to 12" solvent cement joints.
REDPPJ with
REDPPJVS
REDPPJ with
REDPPJFA and
REDPPJ6s
TRAINING AVAILABLE
Item #30-200:
$
1,46789
Price: $
1,03251
Model # Also Available Description Price
Model 30-10 Basic High 12" Vinyl hose, Regulator, Gauge, Torch Rest, Combination Tip, $344.18
 Speed Torch Choose 1 Heat Element (250, 350, 450 or 550) watt
Model 30-102 High Speed Torch, welding stand, combination regulator/filter, gauge, thermometer, 566.22
 Fabricating Unit Choose 2 Heat Elements (250, 350, 450 or 550) watt
Model 30-400 Economy Comp. Diaphragm compressor 13
⁄4cfm @3psi, basic torch, combination tip, 994.45
 /Torch Outfit Choose 1 Heat Element (250, 350, 450 or 550) watt
NCT-1
NR-1
NHS-1
Welding Rod PVC PP HDPE
 Size Item # Price/Lb. Item # Price/Lb. Item # Price/Lb.
 1
⁄8" WRPV18 $9.81 WRPP18 $7.85 WRPE18 $7.85
 5
⁄32" WRPV532 9.81 WRPP532 7.85 WRPE532 7.85
 3
⁄16" WRPV316 9.81 WRPP316 7.85 WRPE316 7.85
 1
⁄4" WRPV14 9.81 WRPP14 7.85 WRPE14 7.85
Hydrostatic test pumps are designed for pressure
testing water systems. Output pressure adjustments
made by a knob and monitoring gauge. Built in
bypass allows for automatic water recirculation
once set. Quick disconnect with built-in
check valve. Includes high pressure hose.
Hydrostatic Test Pumps
NEW
Item # Description Price
EHTP500 110V, Single Phase 50/60 Hz $509.73
EHTP500C 110V, Single Phase 50/60 Hz with Protective Cage 614.91
DPHTP500 Drill-Powered Unit (drill not included) 516.12
Tripod For Plastic Pipe
Light Weight Aluminum Legs
n Ergonmic solution with aluminum legs for weight-critical field use
n Folds easily and features padded handle for portability
n Bowtie style, dowuble-faced jaw gives twice
the life of other jaws
n Raised lip keeps tols on the bottom Tray
n With a 4" 114mm OD pipe capacity
Item # Description Price
R450GB Aluminum Tripod Legs Bowtie Chain Style Jaw $551.23
450PJ Optional Coated Jaw For Protection of Pipe Surfaces 80.76
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 107
107_107 3/30/14 12:50 PM Page 107
Tools & Accessories
Power Bevelers Protective Industrial Products
PB-200 CORDLESS POWER BEVELER
n Powerful 5.5 amp motor with 30,000 no load RPM.
n Versatile Bevels Sch 40 or 80 vinyl pipe 2" and larger.
n Cordless Powerful 18 volt 2.4 amp hour battery provides
power for 30 or more bevels on 6" pipe between charges.
n Light Weight Less than 6 lbs.
n Kit Content: (1) PB 200 tool; (2) 18 volt 2.4 amp hour
battery; (1) 30 minute battery charger; (1) carrying case.
microEXPLORER™ Digital
Inspection Camera
The new RIDGID® microEXPLORER™ Digital Inspection
Camera is a powerful, handheld, video inspection system
that’s portable enough to be carried anywhere. This completely
digital platform allows you to perform and record
detailed visual inspections of hard to reach areas.
Quick Spec
n Display: 3.5" Color LCD (320 x 240 res.)
n Image Capture: JPG Images (1280 x
1024) AVI Video (320 x 240)
n Recording Medium: Internal Memory
or SD Card
n Additional Ports: USB and SD card
n Image Controls: Pan, Zoom, Self
Leveling, Low Light Vision
n Lighting: 4 Fully Adjustable LEDs
n Camera Diameter: 0.7" (17 mm)
n Cable Reach: 3' (expandable to 30'
w/optional extensions)
n Waterproof: Camera & Cable to 10'
(when properly assembled)
n Power Source: Rechargeable Lithium Ion
Battery (4 Hours of Continuous Run Time)
Quick Spec
n Voltage: 12V
n Torque: 1,900 in-lbs
n Capacity: 2" PVC (23
⁄8" O.D.)
n Blade: 3mm Reinforced Stainless Steel
n Variable Speed w/Reverse
n Blade Wrench: On-Board Storage
n Gear Drive: All-Metal Planetary Drive
w/Protecting Clutch
n Blade Return: Quick Release or Powered
Return
n Battery: M12™ Compact or XC
n Batteries Included: 1
Item # Description Price
30063 microEXPLORER® Digital Inspection Camera $548.02
30083 Replacement Camera Head 260.83
30203 Accessory Pack (Mirror, Hook and Magnet) 34.74
30198 Replacement 3.7V Lithium-Ion Battery 80.25
30208 DC Adaptor 110.08
30068 Imager Head and 9.5mm Cable 134.25
31128 Universal 3' Cable Extension 63.40
31133 Universal 6' Cable Extension 114.63
Item # Description Price
PB-150 Corded Power Beveler $821.40
PB-200 Cordless Power Beveler 880.75
Item # Description Price
2470-20 M12™ Cordless Lithium-Ion 2" PVC Shear Only $185.25
2470-21 M12™ Cordless Lithium-Ion 2" PVC Shear Kit 281.83
48-44-0400 PVC Shear Replacement Blade 32.51
2471-20 M12™ Cordless Lithium-Ion Copper Tube Cutter ½" to 11
⁄8"od 135.87
48-38-0010 Copper Cutter Replacement Wheel (2) 6.69
48-11-2401 M12™ Cordless Lithium-Ion Battery 54.71
48-59-2401 M12™ Cordless Lithium-Ion Charger 61.67
PB-150 CORDED POWER BEVELER
n Powerful 5.5 amp 110 V motor with 30,000
no load RPM.
n Light Weight Less than 4 lbs.
n Versatile Bevels Sch 40 or 80 vinyl pipe 2"
and larger.
M12™ Cordless PVC Shear Kit 2470-21
Broad Selection of Manufactures with an
Extensive Range of Protective Industrial Products!
Call A Webb Specialist With Your Need.
Item # Description Price
34-874-L GLV LRG G-TEK MAXIFLEX ULTIMATE BLK $4.73
34-874-XL GLV XT LRG G-TEK MAXIFLEX ULTIMATE BLK 4.73
84-7532-L GLV LRG B/C SPLT CWHD BLU BLK&RED STRP 2.57
84-7532-XL GLV XT LRG B/C CWHD BLU BLK&RED STRP 2.57
37-C110PDD GLV DBL SD DOT LRG COT/POLY/PVC NAT/BLK 1.08
77-268 GLV TOP GR LND LRG CWHD LTHR/COT NAT 12.90
ML1103 MLB H/W JERSEY GLOVE DOTTED PALM 12.69
HP16160 HAT HARD BLUE RATCHET 6PT 7.88
HP16110 HAT HARD WHITE RATCHET 6PT 10.36
282-ABR170-62-WEBB HRD CAP W/F.W.Webb LOGO 22.14
280-ML5151-50 HRD HAT CMFRT PLUS 5151 TYP 1 CLS G BLU 11.34
280-ML5151-10 HRD HAT CMFRT PLUS 5151 TYP 1 CLS G WHT 11.34
291-110 KNEE PADS NON-MARRING RBR CAPS ADJ 1SZE 9.02
270-2050 MASK DUST SAFETY ZONE N95 W/RESP 1.48
270-2000 DISP CNE RESPIRATOR N95 W/OUT VLV 24.00
201-370L RAINSUIT YELLOW 3-PIECE LRG 10.48
201-370XL RAINSUIT YELLOW 3-PIECE X-LRG 11.44
PM5010 EAR MUFFS HVY DTY NRR34 11.98
DP1000 EARPLUGS DISP (200) NRR31 26.26
265-200U EARPLUGS L/CORD SOFT PU FM BRT ORG 32DB 25.98
VGSB2820ST EYEWEAR SFTY GRAY AF 6.80
SB1620S8 EYEWEAR SFTY GRAY/BLACK AF 6.40
SS3320E3 EYEWEAR SFTY GRAY/SILVER 6.40
253-SS-40064 SFTY GLS BOLLE SOLIS FULL BLK FRM/BLU MIR 18.38
253-SW-40159 SFTY GLS BOLLE SHDW FULL BLK FRM/RED MIR 21.58
250-50-0420 SFTY GLS FUSELAGE FULL BLK FRM CLR 8.78
250-21-0421 SFTY GLS HI-VLTG AC SEMI-RIM BLK FRM GRY 3.86
250-01-0900 SFTY GLS ZENON Z12 RIMLESS CLR LENS 1.32
250-06-0000 SFTY GLS ZENON Z13 RIMLESS CLR LENS 1.58
254-DU-40161 SFTY GOGGLE BOLLE DUO FRSTD W/STRAP CLR 35.06
SB4510D SFTY SUNGLASSES AVANTE PCBNT CLR 4.10
SB5670D SFTY SUNGLASSES GOLIATH PCBNT GRY 5.68
302-WCENGLY/XL VEST HI-VISIBILITY XL CLS II 6.86
302-WCENGLY/XXL VEST HI-VISIBILITY XXL CLS II 6.86
Among a Few Manufactures Represented
NEW
Cutting faster, cleaner and closer than traditional methods, the M12™ Cordless PVC Shear utilizes
a super sharp stainless steel blade for burr-free cuts, slices through 2" PVC in as fast as 3
seconds, and offers an offset blade to cut PVC mounted to a stud or close
to a wall. Powered by the MILWAUKEE® M12™ LITHIUM-ION battery. 2470-20
2470-21
2471-20
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 108
108_108 3/30/14 12:52 PM Page 108
Machine Shapes & Profiles
TYPE I ROUND SOLID BAR Note: High Tolerance Centerless Ground +/-.003

Size Std Tol. Camber Std/Toler. Hi/Toler. Material (Weight Lbs./ft.)
(in.) O.D. -0; + & Bow Gray PVC Price/Ft Price/Ft White PVC Price/Ft Black PVC Price/Ft CPVC Price/Ft Clear Price/Ft
 1
⁄4 0.25 0.008 N/A 0.029 $.69 $.87 0.029 $.69 0.029 $.69 0.032 $.84 0.029 $.78
 3
⁄8 0.375 0.015 N/A 0.066 .83 .95 0.066 .83 0.066 .83 0.074 1.32 0.066 1.08
 1
⁄2 0.5 0.015 11
⁄2 0.117 .92 1.16 0.117 .92 0.117 .92 0.131 1.49 0.117 1.26
 5
⁄8 0.625 0.02 11
⁄2 0.183 1.11 1.33 0.183 1.11 0.183 1.11 – – 0.183 1.97
 3
⁄4 0.75 0.022 11
⁄2 0.265 1.56 1.85 0.265 1.56 0.265 1.56 0.296 3.15 0.265 2.85
 7
⁄8 0.875 0.025 11
⁄2 0.358 2.08 2.25 0.358 2.08 0.358 2.08 – – 0.358 3.86
 1 1 0.03 11
⁄2 0.471 2.75 2.97 0.471 2.75 0.471 2.75 0.526 5.47 0.471 5.07
 11
⁄8 1.125 0.035 11
⁄4 0.594 3.47 4.15 0.594 3.47 0.594 3.47 – – – –
 11
⁄4 1.25 0.035 11
⁄4 0.736 4.34 4.71 0.736 4.34 0.736 4.34 0.821 7.91 – –
 13
⁄8 1.375 0.04 11
⁄4 0.891 5.28 5.64 0.891 5.28 0.891 5.28 0.994 10.33 – –
 11
⁄2 1.5 0.04 11
⁄4 1.06 6.22 6.52 1.06 6.22 1.06 6.22 1.183 13.50 – –
 15
⁄8 1.625 0.045 11
⁄4 1.244 7.47 8.44 1.244 7.47 1.244 7.47 – – – –
 13
⁄4 1.75 0.05 1 1.44 8.70 9.30 1.44 8.70 1.44 8.70 1.618 18.20 – –
 17
⁄8 1.875 0.055 1 1.657 9.78 10.46 1.657 9.78 1.657 9.78 – – – –
 2 2 0.06 1 1.89 11.20 14.00 1.89 11.20 1.89 11.20 2.109 24.38 – –
1
⁄4" through 2" Bar – 10' lengths. 21
⁄8" through 6" Bar – 5' +10' lengths. 7" through 10" Bar – 5' lengths. 11" & 12" Bar – 2' lengths.
Machining Shapes PVC & CPVC Machining Shapes PVC & CPVC
RECTANGULAR &
SQUARE STOCK
 Tol. Across Material (Weight Lbs./ft.)
Size (in.) Flats (in.) Gray PVC Price/Ft
 1
⁄2 ±.030 0.157 $.94
 5
⁄8 ±.030 0.238 1.36
 3
⁄4 ±.030 0.36 2.05
 1 ±.030 0.629 3.64
 11
⁄4 ±.0625 1.033 6.31
 11
⁄2 ±.0625 1.464 10.09
 2 ±.0750 2.452 16.04
 1
⁄2 x 3
⁄4 1
⁄2 flats +/-.020 0.225 1.56
 1
⁄2 x 3
⁄4 3
⁄4 flats +/-.030 0.225 1.56
 HOLLOW PVC & CPVC BAR STOCK
 Sizes available 1.625" through 8.625"
 O.D. Min. I.D. Max. Material (Weight Lbs./ft.)
 (in.) (in.) PVC Price CPVC Price
 1.625 0.562 1.154 $8.47 1.288 $18.03
 1.900 0.562 1.647 11.72 – –
 1.900 0.906 1.41 10.04 – –
 2.000 1.250 1.285 8.95 – –
 2.125 0.750 2.01 14.45 2.243 31.38
 2.250 1.125 2.025 14.33 2.26 31.38
 2.250 1.500 1.625 10.11 – –
 2.375 1.000 2.393 17.15 2.671 37.38
 2.500 1.000 2.68 18.75 – –
 2.500 1.500 2.209 15.62 – –
 2.625 1.500 2.511 17.55 2.802 39.23
 2.750 1.000 3.299 23.58 3.682 51.54
Less than standard length, add 35% to price. 1.625" x .562" through
5" x 3" stocked in 10' lengths ±1". 5.563" x 4.000" through 8.625"
x 5.75" stocked in 5' lengths ±1".
HEXAGONAL PVC & CPVC STOCK
Stocked in 10' lengths.
Tol. Across Material (Weight Lbs./ft.)
Size (in.) Flats (in.) Gray PVC Gray Price CPVC Price
7
⁄16 ±.030 0.108 $.93 0.121 $1.83 1
⁄2 ±.030 0.142 1.10 0.159 2.40 9
⁄16 ±.030 0.18 1.29 0.202 3.05 5
⁄8 ±.030 0.222 1.67 0.249 3.76 3
⁄4 ±.030 0.32 2.29 0.359 5.42 13⁄16 ±.030 0.375 2.77 0.421 6.36 7
⁄8 ±.030 0.435 3.16 0.489 7.39
1 ±.030 0.569 4.06 0.639 9.65
11
⁄8 ±.030 0.721 6.11 0.81 12.24
11
⁄4 ±.0625 - 0 0.89 7.57 0.999 15.09
13
⁄8 ±.0625 - 0 1.08 9.22 1.213 18.32
11
⁄2 ±.0625 - 0 1.283 10.99 1.441 21.77
13
⁄4 ±.0625 - 0 1.746 14.93 – –
2 ±.0125 - 0 2.28 19.48 2.56 38.67
 ANGLE STOCK
 Material (Weight Lbs./ft.)
 Size (in.) Size (in.) Gray PVC Price/Ft White PVC Price/Ft CPVC Price/Ft Clear Price/Ft
 1 x 1 x 1
⁄8 1 x 1 x 1
⁄8 0.141 $2.50 0.141 $2.50 0.18 $2.80 0.141 $2.16
11
⁄4 x 11
⁄4 x 3
⁄16 11
⁄4 x 11
⁄4 x 3
⁄16 0.262 4.71 0.262 4.71 0.325 5.07 0.262 2.68
11
⁄2 x 11
⁄2 x 3
⁄16 11
⁄2 x 11
⁄2 x 3
⁄16 0.316 5.91 0.316 5.91 0.395 6.16 0.316 3.23
11
⁄2 x 11
⁄2 x 1
⁄4 11
⁄2 x 11
⁄2 x 1
⁄4 0.415 7.01 – – – – 0.415 4.24
 2 x 2 x 1
⁄4 2 x 2 x 1
⁄4 0.563 9.53 0.563 9.53 0.645 10.05 0.563 5.76
Solid Round PVC & CPVC Harvel's PVC and CPVC bar, rod, tubing, and angle provide cost-effective solutions for industrial applications and
offer excellent chemical and corrosion resistance, mechanical strength, and thermal and electrical properties. Available in profiles of solid and
hollow round, hexagonal, square, rectangular, and angle, machining stock shapes are non-contaminating (for purity applications) and have
excellent flammability characteristics.
PVC & CPVC Angle Harvel’s line of angle provides a reliable means for joining PVC and
CPVC sheet to provide corrosion resistant tanks, cabinets, and other items. Joining is accomplished
by the solvent cementing process or hot air welding methods.
Hollow PVC & CPVC Substituting hollow bar for solid
round can result in considerable savings where parts are
bored. Only an internal finish cut is required, as close tolerances
on OD dimensions are maintained.
Hexagonal PVC & CPVC Hexagonal shapes are used in
component fabrication. Items such as nuts, bolts, washers and
spacers can be readily machined from these items to provide
durable corrosion-resistant components. Emphasis is placed on
providing extrusions with minimal sink and smooth surfaces for
dimensional consistency and easy reproduction of machined
components. Sizes available 1.625" through 8.625".
Square & Rectangular PVC & CPVC
Square and rectangular shapes are used in
component fabrication. Items such as nuts,
bolts, washers and spacers can be readily
machined from these items to provide
durable corrosion-resistant components.
Emphasis is placed on providing extrusions
with minimal sink and smooth surfaces for
dimensional consistency and easy reproduction
of machined. Sizes available 1.625"
through 8.625".
PVC Solid Rod Internal
Stress Comparison
Laboratory tests show Harvel PVC
solid rod outperforms other
brands with significantly lower inherent stress levels.
MACHINING
Certain machining practices, regardless of the material being
machined (plastic or metal), can generate excessive stress.
When induced stresses caused by the effects of machining are
added to any residual stress, product failure can result.
Causes of excessive stress induced by machining include:
n Excessive heat generation (frictional heat caused by
improper speed and/or feed rates)
n Taking too much material at once
n Using worn, dull or improper tooling
n Improper support of product during machining
CAUTION: Certain oils and lubricants typically used for
machining of metallics contain stress-cracking agents that are
not compatible with PVC or CPVC materials. Contact the lubricant
manufacturer for compatibility prior to use.
Clear PVC Harvel Clear PVC materials are
listed by NSF International to Standard 61 as
being safe for use in potable water applications.
Many unique items can be machined
from Harvels’ line of PVC shapes. Harvel
Clear PVC shapes provide the reliable chemical
resistance of standard PVC, and are fully
compatible with standard PVC products with
regard to machining characteristics, solvent
cementing and other joining methods.
Superior Quality
Harvel’s state-of-the-art extrusion process
provides porosity-free, stressed-reduced
products with optimum physical properties
and exacting tolerances, producing 9 quality
stock machining shapes from 1
⁄8" through
12" diameters. Available products include
solid bar, hollow bar, square, rectangular,
hexagonal bar, angle and joining strip.
Standard up to 12" Diameter.
Over 12" would be custom.
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 109
109_109 3/30/14 12:56 PM Page 109
STANDARD FEATURES
■ EPDM – durometer A, hardness 65 - 68
■ PTFE or PVDF-bonded EPDM for maximum
corrosion resistance
■ Perfect sealing at low bolt tightening
torque ratings, longer gasket life
■ Working temperature:
1) EPDM: -40 to 195°F
2) PTFE-bonded: -40 to 250°F
3) PVDF-bonded: -40 to 250°F
■ Ideal for plastic piping systems, as well as
metal or plastic-lined metal systems
■ Approximately a 1
⁄3 bolt tightening torque
ratings as compared with flat or envelope
type gasket
■ Thickness of bonded materials
PTFE: All Sizes: 0.016" (0.4mm)
PVDF: Sizes 1
⁄2" - 2": 0.016" (0.4mm)
PVDF: Sizes 3" - 10": 0.020" (0.5mm)
All AV Gaskets shall be of low torque, full face to ANSI B16.5 dimensions and shall have two
concentric, convex, molded rings between center hole and bolt hole circle in EPDM, PTFEbonded
EPDM or PVDF-bonded EPDM, as manufactured by Asahi/America, Inc.
Quick Spec
Materials/Sizes:
■ EPDM: 1
⁄2" - 12"
■ PTFE-bonded EPDM: 1
⁄2" - 12"
■ PVDF-bonded EPDM: 1
⁄2" - 10"
(Except 11
⁄4" and 21
⁄2")
Recommended Bolt Torque*
Nominal Size PTFE
Inches mm PVDF EPDM
1
⁄2 15 174 157 3
⁄4 20 174 157
1 25 174 157
11
⁄4 30 191 165
11
⁄2 40 217 174
2 50 217 174
21
⁄2 65 304 217
3 80 304 217
4 100 304 217
6 150 348 260
8 200 435 304
10 250 435 304
12 300 522 435
*Expressed in Inch-Pounds
AV Gaskets
EPDM Teflon PVDF
Size (3113) (3114) (3115)
1
⁄2 (005) $4.80 $10.41 $16.01 3
⁄4 (007) 4.80 12.16 18.44
1 (010) 4.80 13.88 18.44
11
⁄4 (012) 4.80 17.39 NA
11
⁄2 (015) 4.80 17.39 22.40
2 (020) 7.22 20.86 25.71
21
⁄2 (025) 7.22 24.33 NA
3 (030) 7.22 31.27 39.98
4 (040) 12.02 36.48 47.98
6 (060) 14.40 55.58 68.76
8 (080) 19.20 69.46 115.14
10 (100) 27.71 81.62 127.92
12 (120) 27.71 100.73 NA
Low Torque AV Gaskets
Pipe, Fittings & Cement
 Size Item # Price
 1
⁄2" 4805-005SR $8.12
 3
⁄4" 4805-007SR 9.54
 1" 4805-010SR 11.34
 11
⁄2" 4805-015SR 12.60
 2" 4805-020SR 22.23
Tee SR Fipt
 Size Item # Price
 1
⁄2" 4808-005SR $6.97
 3
⁄4" 4808-007SR 8.47
 1" 4808-010SR 10.50
 11
⁄2" 4808-015SR 14.20
 2" 4808-020SR 19.32
90° Ell SR Fipt
 Size Item # Price
 1
⁄2" 4819-005SR $8.77
 3
⁄4" 4819-007SR 9.88
 1" 4819-010SR 10.44
 11
⁄2" 4819-015SR 14.20
 2" 4819-020SR 19.32
45° Ell SR Fipt
 Size Item # Price
 1
⁄2" 4830-005SR $6.62
 3
⁄4" 4830-007SR 8.28
 1" 4830-010SR 9.13
 11
⁄2" 4830-015SR 11.94
 2" 4830-020SR 14.35
Coupling SR Fipt
 Size Item # Price
3
⁄4" x 1
⁄2" 4839-101 $10.24
1" x 1
⁄2" 4839-130 12.48
1" x 3
⁄4" 4839-131 12.48
11
⁄2" x 1" 4839-211 22.08
2" x 1" 4839-249 32.01
2" x 11
⁄2" 4839-251 32.01
T.T. Bushing Mipt x Fipt
 Size Item # Price
 1
⁄2" 4848-005SR $8.12
 3
⁄4" 4848-007SR 8.22
 1" 4848-010SR 9.13
 11
⁄2" 4848-015SR 12.74
 2" 4848-020SR 129.81
Cap SR Fipt
 Size Item # Price
 1
⁄2" 4858-005SR $30.82
 3
⁄4" 4858-007SR 33.56
 1" 4858-010SR 41.57
 11
⁄2" 4858-015SR 62.96
 2" 4858-020SR 91.95
Union SR Fipt
with Viton® O-ring
 Size Item # Price
 1
⁄2" 4898-005SR $30.20
 3
⁄4" 4898-007SR 32.91
 1" 4898-010SR 40.73
 11
⁄2" 4898-015SR 61.71
 2" 4898-020SR 90.12
Union SR Fipt
with EDPM O-ring
 Size Item # Price
 1
⁄2" 4852-005SR $19.25
 3
⁄4" 4852-007SR 20.85
 1" 4852-010SR 23.38
 11
⁄2" 4852-015SR 32.78
 2" 4852-020SR 38.68
Flange SR Fipt
 Size Item # Price
 1
⁄2" 4853-005 $32.21
 3
⁄4" 4853-007 33.26
 1" 4853-010 35.31
 11
⁄2" 4853-015 68.33
 2" 4853-020 74.47
Blind Flange Fipt
CAUTION
See Checklist for details
Polyproplene Schedule 80
SR Threaded Fittings
■ Wide Selection of Configurations
■ High Grade Natural or Black
■ Full 150 psi Pressure Rating at 73°F
■ Featuring Spears Stainless Steel
Reinforced (SR) Thread
■ 180°F Maximum Service Temperature
PATENTED STAINLESS STEEL
REINFORCED (SR) THREAD DESIGN
Spears patented Stainless Steel Reinforced
(SR) thread design is one of the most
significant advancements in the use of
plastic threaded fittings. More than just
an added metal ring, this unique
precompression design compensates for
expansion forces generated from tapered
pipe thread joint make-up. Radial stress is reduced
in normal installations and contained in severe over tightening
situations. SR style fittings use type 316 Stainless Steel reinforcement.
Did you...
800.343.7555 • fax: 800.232.8726
email: plastics@fwwebb.com fwwebb.com/plastics
fficienc
...ouDid y
y and EetafA S
Plastic Piping S
joining and installation instruc
ve aar ailable in a v y of maietar
Plastic piping sy e a gems arst
listhecky Cfficienc
Systems:
tion instructions to ensure a proper and saf
erty of ma ials and siz s fyalw. Aes
t choiceare a g e for many differ
and safe installation.
follow manufac ers tur
t applicaener tions and
es? edurocpr

w prolloF ement cenoper solv
designed for use with your sy
oolst ials arert, and ma e specifically

t ym thaonfiro cCheck t our applica
age of maorst

ange frrA or the pr
em desigste sya saf
edurocpr es and pr

olloF w manufac
ting emen
em. stour sy
e specifically
our application,
ials?ertage of ma
or the proper handling and
em design and oper tion?a
e o ensures tticaces and pr
w manufacturers installation
Request your FREE checklist via email, Facebook or just give us a call.
Basic Safety & Efficiency Checklist For All Thermoplastic Piping Systems
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 110
110_110 3/31/14 10:01 AM Page 110
Pipe, Fittings & Cement
Black Polypro pylene & Natural Threaded Fittings (Schedule 80)
Threaded Flange
Size Black PP Price Natural PP Price
 1
⁄2 2852-H05 $30.26 7852-H05 $33.44
 3
⁄4 2852-H07 32.81 7852-H05 36.23
 1 2852-H10 36.81 7852-H05 40.61
11
⁄4 2852-H12 50.55 7852-H05 55.88
11
⁄2 2852-H15 51.56 7852-H05 56.99
 2 2852-H20 60.87 7852-H05 67.18
 3 2852-H30 149.33 7852-H05 161.33
 4 2852-H40 190.86 7852-H05 204.36
Threaded 45° Elbow
Size Black PP Price Natural PP Price
 1
⁄2 2819-005 $13.74 7819-005 $14.88
 3
⁄4 2819-007 15.57 7819-007 16.84
 1 2819-010 16.42 7819-010 17.79
11
⁄4 2819-012 19.34 7819-012 20.91
11
⁄2 2819-015 22.31 7819-015 24.10
 2 2819-020 30.32 7819-020 32.78
 3 2819-030 134.70 7819-030 145.05
 4 2819-040 201.18 7819-040 201.18
Threaded 90° Elbow
Size Black PP Price Natural PP Price
 1
⁄2 2808-005 $10.99 7808-005 $11.91
 3
⁄4 2808-007 13.40 7808-007 14.47
 1 2808-010 16.49 7808-010 17.84
11
⁄4 2808-012 19.52 7808-012 21.09
11
⁄2 2808-015 22.31 7808-015 24.12
 2 2808-020 30.32 7808-020 32.78
 3 2808-030 107.25 7808-030 115.87
 4 2808-040 140.19 7808-040 150.51
Threaded Tee
Size Black PP Price Natural PP Price
 1
⁄2 2805-005 $13.52 7805-005 $14.60
 3
⁄4 2805-007 15.06 7805-007 16.29
 1 2805-010 17.84 7805-010 19.28
11
⁄4 2805-012 21.76 7805-012 23.54
11
⁄2 2805-015 26.40 7805-015 28.51
 2 2805-020 35.07 7805-020 37.91
 3 2805-030 175.05 7805-030 190.50
 4 2805-040 248.67 7805-040 270.06
Threaded Plug
Size Black PP Price Natural PP Price
 1
⁄2 2850-005 $11.97 7850-005 $12.97
 3
⁄4 2850-007 12.61 7850-007 13.67
 1 2850-010 14.01 7850-010 15.15
11
⁄4 2850-012 24.11 7850-012 26.07
11
⁄2 2850-015 28.54 7850-015 30.86
 2 2850-020 37.79 7850-020 40.86
 3 2850-030 50.32 7850-030 54.41
 4 2850-040 60.21 7850-040 65.09
Threaded Cap
Size Black PP Price Natural PP Price
 1
⁄2 2848-005 $9.87 7848-005 $10.70
 3
⁄4 2848-007 13.03 7848-007 14.10
 1 2848-010 14.36 7848-010 15.54
11
⁄4 2848-012 18.81 7848-012 20.36
11
⁄2 2848-015 20.05 7848-015 21.64
 2 2848-020 22.53 7848-020 24.38
 3 2848-030 59.62 7848-030 64.46
 4 2848-040 80.03 7848-040 86.33
Threaded Coupling
Size Black PP Price Natural PP Price
 1
⁄2 2830-005 $10.45 7830-005 $11.32
 3
⁄4 2830-007 13.03 7830-007 14.10
 1 2830-010 14.36 7830-010 15.54
11
⁄4 2830-012 16.77 7830-012 20.91
11
⁄2 2830-015 18.81 7830-015 24.12
 2 2830-020 22.53 7830-020 24.38
 3 2830-030 50.03 7830-030 54.09
 4 2830-040 94.29 7830-040 100.59
Threaded Ball Valve - Viton
 Size Black PP Price
 1
⁄2 T61TBC-V-005 $89.25
 3
⁄4 T61TBC-V-005 104.70
 1 T61TBC-V-005 132.15
 11
⁄2 T61TBC-V-005 223.13
 2 T61TBC-V-005 297.75
 3 T61TBC-V-005 714.46
 4 T61TBC-V-005 1,125.01
Options: Natural PP also available in socket only,
EPDM seals available, Black PP socket & flange
available.
Threaded Ball Check Valve - Viton
 Size Black PP Price
 1
⁄2 T61BC-V-005 $97.87
 3
⁄4 T61BC-V-007 131.32
 1 T61BC-V-010 170.77
 11
⁄2 T61BC-V-015 251.40
 2 T61BC-V-020 398.77
Options: Natural PP also available in socket only,
EPDM seals available, Black PP socket & flange
available.
Threaded Union
Size Black PP Price Natural PP Price
 1
⁄2 2898-005 $47.61 7819-005 $51.48
 3
⁄4 2898-007 52.17 7819-007 56.41
 1 2898-010 64.17 7819-010 69.36
11
⁄4 2898-012 84.22 7819-012 90.97
11
⁄2 2898-015 96.97 7819-015 105.60
 2 2898-020 129.95 7819-020 141.78
Nipples - Black Polypropylene Schedule 80
 Length-Close Length-Short Length-3" Length-4" Length-5" Length-6"
 Size in. Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 1
⁄2 2861-077 $2.30 2861-078 $2.49 2861-081 $3.44 2861-082 $3.98 2861-083 $4.54 2861-084 $5.17
 3
⁄4 2861-104 3.22 2861-105 3.51 2861-106 4.26 2861-107 4.98 2861-108 5.71 2861-109 6.54
 1 2861-133 4.05 2861-134 4.46 2861-135 5.54 2861-136 6.46 2861-137 7.45 2861-138 8.41
 11
⁄4 2861-170 4.66 2861-171 5.71 2861-172 6.24 2861-173 7.34 2861-174 8.62 2861-175 9.72
 11
⁄2 2861-213 5.06 2861-214 6.01 2861-215 6.68 2861-216 7.86 2861-217 9.27 2861-218 10.51
 2 2861-251 6.98 2861-252 7.67 2861-253 8.61 2861-254 10.28 2861-255 11.69 2861-256 13.52
 3 2861-338 15.95 2861-340 19.27 – – 2861-341 19.27 2861342 24.33 2861-343 27.94
 4 2861-422 17.99 2861-423 22.74 – – – – 2861.425 27.65 2861-426 32.56
Pipe
Nominal Outside Inside
Pipe Size Diam. Diam.
 (in.) (in.) (in.) Item # Price/Ft.
Black PP
 1
⁄2 0.840 0.147 6100-80-005 $2.69
 3
⁄4 1.050 0.154 6100-80-007 3.25
 1 1.315 0.179 6100-80-010 4.89
 11
⁄4 1.660 0.191 6100-80-012 6.01
 11
⁄2 1.900 0.200 6100-80-015 6.20
 2 2.375 0.218 6100-80-020 7.60
 3 3.500 0.300 6100-80-030 15.14
 4 4.500 0.337 6100-80-040 22.29
 6 6.625 0.432 6100-80-060 45.52
Natural PP
 1
⁄2 0.840 0.147 6200-80-005 2.65
 3
⁄4 1.050 0.154 6200-80-007 3.29
 1 1.315 0.179 6200-80-010 4.85
 11
⁄2 1.900 0.2 6200-80-015 6.29
 2 2.375 0.218 6200-80-000 8.09
 3 3.500 0.3 6200-80-030 15.35
 4 4.500 0.337 6200-80-040 21.85
(PP) Chemtrol Black and Natural PP, as specified in ASTM D4101, is a member of the polyolefin
family of plastics. Although PP has less physical strength than PVC, it is chemically resistant to
organic solvents as well as acids and alkalies. Generally, polypropylene should not be used in
contact with strong oxidizing acids, chlorinated hydrocarbons and aromatics. Polypropylene
has gained wide acceptance where its resistance to sulfur-bearing compounds is
particularly useful in salt water disposal lines, crude oil piping, and low
pressure gas gathering systems. With a maximum service temperature of 180°F, PP has
proved to be an excellent material for laboratory and industrial drainage where mixtures of
acids, bases and solvents are involved. All polyolefins are severely degraded by ultraviolet
(UV) radiation and are not recommended for application involving direct sunlight.
Polypropylene is joined by the thermo-seal fusion process, threading or flanging.
Socket Fusion
Available
Socket Fusion
Available
CAUTION
See page 110 for details
Flange Gaskets –
See page 120.
Threaded Bushing
 Size Black PP Price Natural PP Price
3
⁄4 x 1
⁄2 2839-101 $16.17 7839-101 $17.52
 1 x 1
⁄2 2839-130 19.69 7839-130 21.27
 1 x 3
⁄4 2839-131 19.69 7839-131 21.27
11
⁄4 x 3
⁄4 2839-167 34.69 7839-012 37.55
11
⁄4 x 1 2839-168 34.69 7839-168 37.55
1 1
⁄2 x 1 2839-211 34.69 7839-211 37.55
11
⁄2 x 11
⁄4 2839-212 34.70 7839-212 37.55
 2 x 1 2839-249 50.25 7839-249 54.34
2 x 11
⁄2 2839-251 50.26 7839-251 54.34
 3 x 2 2839-338 52.03 7839-338 56.24
 4 x 3 2839-422 73.66 7839-422 80.03
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 111
111_111 3/30/14 12:58 PM Page 111
Pipe, Fittings & Cement
Red & Natural PVDF (Kynar®) Schedule 80 Threaded Pipe, Valves & Fittings
1
⁄2
3
⁄4
1
11
⁄2
2
Reducer Bushing – M.P.T. x F.P.T.
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 3
⁄4 X 1
⁄2 3839-101 $38.82 4839-101 $40.66
 1 x 1
⁄2 3839-130 38.82 4839-130 40.64
 1 x 3
⁄4 3839-131 40.56 4839-131 42.45
 11
⁄2 X 1 3839-211 52.82 4839-211 55.32
 2 x 1 3839-249 74.63 4839-249 81.32
 2 x 11
⁄2 3839-251 74.63 4839251 81.32
Cap – Threaded
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3848-005 $31.61 4848-005 $33.13
 3
⁄4 3848-007 36.45 4848-007 38.18
 1 3848-010 44.89 4848-010 44.91
 11
⁄2 3848-015 70.19 4848-015 45.96
 2 3848-020 94.68 4848-020 99.99
TRU-BLOC™ Ball Valve Viton® O-Rings Teflon® Seats
 PVDF - RED PVDF - NATURAL
 Threaded Threaded
 Size Item # Price Item # Price
 1
⁄2 T65TBV-005 $166.09 T66TBV-005 $182.46
 3
⁄4 T65TBV-007 236.46 T66TBV-007 245.39
 1 T65TBV-010 343.64 T66TBV-010 355.94
 11
⁄2 T65TBV-015 503.31 T66TBV-015 622.02
 2 T65TBV-020 690.93 T66TBV-020 860.16
Plug – Threaded
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3850-005 $43.21 4850-005 $45.23
 3
⁄4 3850-007 47.71 4850-007 50.01
 1 3850-010 53.84 4850-010 56.43
 11
⁄2 3850-015 82.39 485O-015 86.27
 2 3850-020 100.87 4850-020 106.07
Coupling – Threaded
 Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3830-005 $34.95 4830-005 $36.60
 3
⁄4 3830-007 38.87 4830-007 40.70
 1 3830-010 52.71 4830-010 55.20
 11
⁄2 3830-015 70.76 4830-015 74.13
 2 3830-020 117.68 4830-020 122.99
45° Elbow – Threaded
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3819-005 $38.23 4819-005 $41.02
 3
⁄4 3819-007 57.38 4819-007 60.10
 1 3819-010 65.93 4819-010 69.09
 11
⁄2 3819-015 101.76 4819-015 106.18
 2 3819-020 117.68 4819-020 145.11
Flange – Threaded (Heavy Duty – Solid Style)
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3852-HO5 $66.28 4852-HO5 $71.62
 3
⁄4 3852-HO7 81.49 4852-HO7 85.36
 1 3852-H1O 128.30 4852-H1O 136.27
 11
⁄2 3852-H15 169.01 4852-H15 267.21
 2 3852-H20 267.22 4852-H20 281.38
Red/Natural PVDF Nipple Threaded Both Ends
 Nom. Pipe Length (inches)
 Size (In.) Price Close Short 3 4 5 6
 Red Item # 3861--077 3861--078 3861-081 3861-082 3861-083 3861-084
 Price $19.39 $24.35 $26.49 $28.73 $32.72 $39.39
 Natural Item # 4861-077 4861-078 4861-081 4861-082 4861-083 4861-084
 Price 19.48 22.80 27.79 30.20 34.36 41.84
 Red Item # 3861-104 3861-105 3861-106 3861-107 3861-108 3861-109
 Price 23.88 26.50 29.09 32.72 39.39 47.08
 Natural Item # 4861-104 4861-105 4861-106 4861-107 4861-108 4861-109
 Price 25.08 27.79 30.55 34.20 41.39 49.44
 Red Item # 3861-133 3861-134 3861-135 3861-136 3861-137 3861-138
 Price 29.08 33.51 39.39 47.87 58.14 72.11
 Natural Item # 4861-133 4861-134 4861-135 4861-136 4861-137 4861-138
 Price 31.24 35.17 41.39 48.29 61.06 75.65
 Red Item # 3861-213 3861-214 3861-215 3861-216 3861-217 3861-218
 Price 43.78 49.70 60.68 75.35 94.20 95.93
 Natural Item # 4861-213 4861-214 4861-215 4861-216 4861-217 4861-218
 Price 45.98 52.20 70.10 79.15 98.82 127.41
 Red Item # 3861-251 3861-252 3861-253 3861-254 3861-255 3861-256
 Price 50.64 86.51 105.28 131.27 154.25 191.18
 Natural Item # 4861-251 4861-252 4861-253 4861-254 4861-255 4861-256
 Price 54.42 78.68 90.78 136.69 170.86 204.84
*For threaded one end or any length nipples, please call customer service.
Red Kynar® pipe is pigmented to resist ultra-violet attack when handling high concentrations of halogens.
Chemtrol’s pipe is completely compatible to Chemtrol’s line of Kynar® fittings and valves.
Socket Fusion available through 6".
90° Elbow – Threaded
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3808-005 $38.50 4808-005 $39.73
 3
⁄4 3808-007 45.74 4808-007 47.94
 1 3808-010 65.93 4808-010 69.09
 11
⁄2 3808-015 101.76 4808-015 106.17
 2 3808-020 139.81 4808-020 145.11
Tee – Threaded
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3805-005 $44.76 4805-005 $46.95
 3
⁄4 3805-007 51.52 4805-007 53.95
 1 3805-010 80.99 4805-010 84.83
 11
⁄2 3805-015 130.07 4805-015 137.15
 2 3805-020 177.85 4805-020 187.59
Pipe
 PVDF - RED PVDF - NATURAL
 Size Item # Price/Ft. Item # Price/Ft.
 1
⁄2 6500-005 $16.01 6600-005 $16.75
 3
⁄4 6500-007 21.16 6600-007 22.10
 1 6500-010 31.06 6600-010 32.51
 11
⁄2 6500-015 42.95 6600-015 44.74
 2 6500-020 58.26 6600-020 60.31
 4 6500-040 179.30 6600-040 190.39
Flange Gaskets – See page 120.
PVDF (Polyvinylidene Fluoride) is a strong, tough, and abrasion resistant
fluorocarbon material. It resists distortion and retains most of its strength to
280°F. It is chemically resistant to most acids, bases, and organic solvents and is
ideally suited for handling wet or dry chlorine, bromine and other halogens. No
other solid thermoplastic piping components can approach the
combination of strength, chemical resistance and working
temperatures of PVDF. PVDF is joined by the thermo-seal
fusion process, threading or flanging.
Union – Threaded – Viton®
Pipe Size Red Natural
 (In.) Item # Price Item # Price
 1
⁄2 3898-005 $86.13 4898-005 $90.25
 3
⁄4 3898-007 113.26 4898-007 118.57
 1 3898-010 164.58 4898-010 169.89
 11
⁄2 3898-015 265.01 4898-015 267.22
 2 3898-020 348.63 4898-020 368.10
CAUTION
See page 110 for details
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 112
112_112 3/30/14 2:04 PM Page 112
90° Street Ell Spig x Soc
Item # Size in. Price
409-005 1
⁄2 $.57
409-007 3
⁄4 .69
409-010 1 1.20
409-012 11
⁄4 1.46
409-015 11
⁄2 1.61
409-020 2 3.09
409-025 21
⁄2 5.53
409-030 3 6.83
409-040 4 12.69
n Full 1
⁄4" - 12" Availability
n Higher Flow Capacity
SPEARS® Schedule 40 PVC fitting
designs combine years of proven
experience with computer generated
stress analysis to yield the optimum
physical structure and performance
for each fitting. Material reinforcement
is uniformly placed in stress
concentration areas for substantially
improved pressure handling capability.
Resulting products are subjected to numerous
verification tests to assure the very best PVC
fittings available. Many other fitting configurations
available. Please contact Webb for
information.
Tee Soc
Item # Size in. Price
401-003 3
⁄8 $.79
401-005 1
⁄2 .24
401-007 3
⁄4 .27
401-010 1 .55
401-012 11
⁄4 .84
401-015 11
⁄2 1.03
401-020 2 1.49
401-025 21
⁄2 4.94
401-030 3 6.47
401-040 4 11.70
Tee Soc x Fipt
Item # Size in. Price
402-003 3
⁄8 $.80
402-005 1
⁄2 .34
402-007 3
⁄4 .50
402-010 1 .96
402-012 11
⁄4 1.51
402-015 11
⁄2 1.97
402-020 2 2.52
402-025 21
⁄2 7.63
402-030 3 9.73
402-040 4 14.88
Tee Fipt
Item # Size in. Price
405-005 1
⁄2 $.92
405-007 3
⁄4 1.46
405-010 1 2.00
405-012 11
⁄4 2.77
405-015 11
⁄2 2.87
405-020 2 3.79
405-025* 21
⁄2 13.49
*Outlet sized with Bushing
90° Ell Fipt
Item # Size in. Price
408-005 1
⁄2 $.48
408-007 3
⁄4 .72
408-010 1 1.53
408-012 11
⁄4 1.65
408-015 11
⁄2 2.08
408-020 2 3.16
45° Ell Soc
Item # Size in. Price
417-005 1
⁄2 $.34
417-007 3
⁄4 .50
417-010 1 .61
417-012 11
⁄4 .85
417-015 11
⁄2 1.08
417-020 2 1.41
417-025 21
⁄2 3.69
417-030 3 5.73
417-040 4 10.27
45° Street Ell Spig x Soc
Item # Size in. Price
427-005 1
⁄2 $.34
427-007 3
⁄4 .50
427-010 1 .61
427-012 11
⁄4 .85
427-015 11
⁄2 1.08
427-020 2 1.41
427-025 21
⁄2 4.61
427-030 3 5.73
427-040 4 10.27
Cross Soc
Item # Size in. Price
420-005 1
⁄2 $.78
420-007 3
⁄4 1.28
420-010 1 1.61
420-012 11
⁄4 2.11
420-015 11
⁄2 2.39
420-020 2 3.54
420-025 21
⁄2 7.49
420-030 3 9.17
420-040 4 13.60
PVC Schedule 40 White Fittings
Performance Engineered & Tested
90° Ell Soc
Item # Size in. Price
406-003 3
⁄8 $1.02
406-005 1
⁄2 .21
406-007 3
⁄4 .23
406-010 1 .42
406-012 11
⁄4 .71
406-015 11
⁄2 .78
406-020 2 1.20
406-025 21
⁄2 3.69
406-030 3 4.40
406-040 4 7.88
PVC Schedule 40 Pipe - White
(Sold in 20 ft. lengths)
Size Price
in. O.D. Min. Wall Item # /Ft
1
⁄2 .840 .109 P/P12S40 $.39 3
⁄4 1.050 .113 P/P34S40 .51
1 1.315 .133 P/P1S40 .73
11
⁄4 1.660 .140 P/P114S40 .99
11
⁄2 1.900 .145 P/P112S40 1.18
2 2.375 .154 P/P2S40 1.58
21
⁄2 2.875 .203 P/P212S40 3.18
3 3.500 .216 P/P3S40 3.27
4 4.500 .237 P/P4S40 4.63
6 6.625 .280 P/P6S40 8.17
8 8.625 .322 P/P8S40 12.29
90° Ell Soc x Fipt
Item # Size in. Price
407-005 1
⁄2 $.24
407-007 3
⁄4 .27
407-010 1 .55
407-012 11
⁄4 .91
407-015 11
⁄2 1.01
407-020 2 2.58
407-025 21
⁄2 6.39
407-030 3 9.59
407-040 4 14.54
Wye Soc
Item # Size in. Price
475-005 1
⁄2 $.85
475-007 3
⁄4 1.37
475-010 1 1.89
475-012 11
⁄4 2.92
475-015 11
⁄2 3.77
475-020 2 11.28
475-025 21
⁄2 25.75
475-030 3 18.97
475-040 4 35.79 1
⁄2" - 21
⁄2" – 235 psi and 3" - 6" – 150 psi
Maximum Internal Pressure Rating @ 73°F
Reducer Bushing Mipt x Fipt
Item # Size in. Price
439-052 3
⁄8 x 1
⁄4 $.96
439-071 1
⁄2 x 1
⁄8 .96
439-072 1
⁄2 x 1
⁄4 .96
439-073 1
⁄2 x 3
⁄8 .96
439-098 3
⁄4 x 1
⁄4 .59
439-099 3
⁄4 x 3
⁄8 .59
439-101 3
⁄4 x 1
⁄2 .59
439-130 1 x 1
⁄2 .83
439-131 1 x 3
⁄4 .83
439-166 11
⁄4 x 1
⁄2 1.24
439-167 11
⁄4 x 3
⁄4 1.24
439-168 11
⁄4 x 1 1.24
439-209 11
⁄2 x 1
⁄2 1.49
439-210 11
⁄2 x 3
⁄4 1.49
439-211 11
⁄2 x 1 1.49
439-212 11
⁄2 x 11
⁄4 1.49
439-248 2 x 3
⁄4 1.61
439-249 2 x 1 1.61
439-250 2 x 11
⁄4 1.61
439-251 2 x 11
⁄2 1.61
439-292 21
⁄2 x 2 5.58
439-338 3 x 2 6.59
439-339 3 x 21
⁄2 6.59
Coupling Soc
Item # Size in. Price
429-005 1
⁄2 $.13
429-007 3
⁄4 .19
429-010 1 .33
429-012 11
⁄4 .44
429-015 11
⁄2 .47
429-020 2 .72
429-025 21
⁄2 1.61
429-030 3 2.51
429-040 4 3.61
221
⁄2° Street Ell Soc
Item # Size in. Price
416-005 1
⁄2 $.47
416-007 3
⁄4 .72
416-010 1 .89
416-012 11
⁄4 1.24
416-015 11
⁄2 1.54
416-020 2 2.04
416-030 3 8.18
416-040 4 14.68
Coupling Fipt
Item # Size in. Price
430-005 1
⁄2 $.25
430-005G 1
⁄2 .27
430-007 3
⁄4 .47
430-010 1 .61
430-012 11
⁄4 2.09
Pipe, Fittings & Cement CAUTION See page 110 for details
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 113
113_113 3/30/14 2:06 PM Page 113
Pipe, Fittings & Cement
Cap Soc
Item # Size in. Price
447-003 3
⁄8 $.51
447-005 1
⁄2 .19
447-007 3
⁄4 .21
447-010 1 .34
447-012 11
⁄4 .48
447-015 11
⁄2 .51
447-020 2 .61
447-025 21
⁄2 1.99
447-030 3 2.19
447-040 4 4.98
Cap Fipt
Item # Size in. Price
448-003 3
⁄8 $.70
448-005 1
⁄2 .38
448-007 3
⁄4 .45
448-010 1 .68
448-012 11
⁄4 .81
448-015 11
⁄2 .84
448-020 2 1.48
448-025 21
⁄2 2.19
448-030 3 2.87
448-040 4 5.01
Reducer Bushing
Flush Style Spig x Fipt
Item # Size in. Price
438-071 1
⁄2 x 1
⁄8 $.45
438-072 1
⁄2 x 1
⁄4 .45
438-073 1
⁄2 x 3
⁄8 .45
438-098 3
⁄4 x 1
⁄4 .45
438-101 3
⁄4 x 1
⁄2 .34
438-127 1 x 1
⁄8 .55
438-129 1 x 3
⁄8 .55
438-130 1 x 1
⁄2 .55
438-131 1 x 3
⁄4 .55
438-166 11
⁄4 x 1
⁄2 .84
438-167 11
⁄4 x 3
⁄4 .84
438-168 11
⁄4 x 1 .84
438-206 11
⁄2 x 1
⁄8 .96
438-207 11
⁄2 x 1
⁄4 .96
438-209 11
⁄2 x 1
⁄2 .96
438-210 11
⁄2 x 3
⁄4 .96
438-211 11
⁄2 x 1 .96
438-212 11
⁄2 x 11
⁄4 .96
438-245 2 x 1
⁄4 1.29
438-247 2 x 1
⁄2 1.29
438-248 2 x 3
⁄4 1.29
438-249 2 x 1 1.29
438-250 2 x 11
⁄4 1.29
438-251 2 x 11
⁄2 1.29
438-287 21
⁄2 x 1
⁄2 1.87
438-288 21
⁄2 x 3
⁄4 1.87
438-289 21
⁄2 x 1 1.87
438-290 21
⁄2 x 11
⁄4 1.87
438-291 21
⁄2 x 11
⁄2 1.87
438-292 21
⁄2 x 2 1.87
438-334 3 x 3
⁄4 2.17
438-335 3 x 1 2.17
438-336 3 x 11
⁄4 2.17
438-337 3 x 11
⁄2 2.17
438-338 3 x 2 2.17
438-339 3 x 21
⁄2 2.17
438-420 4 x 2 4.81
438-421 4 x 21
⁄2 4.81
438-422 4 x 3 4.81
Plug Mipt
Item # Size in. Price
450-003 3
⁄8 $.57
450-005 1
⁄2 .55
450-007 3
⁄4 .59
450-010 1 .96
450-012 11
⁄4 1.02
450-015 11
⁄2 1.08
450-020 2 1.41
450-025 21
⁄2 1.96
450-030 3 2.96
450-040 4 6.68
Special Reinforced Reducer Bushing
Flush Style Spig x SR Fipt
Item # Size in. Price
438-128SR 1 x 1
⁄4 $1.53
438-209SR 11
⁄2 x 1
⁄2 3.87
438-210SR 11
⁄2 x 3
⁄4 3.87
438-247SR 2 x 1
⁄2 4.72
438-248SR 2 x 3
⁄4 4.72
438-249SR 2 x 1 4.72
438-334SR 3 x 3
⁄4 18.58
438-335SR 3 x 1 18.58
438-336SR 3 x 1
⁄4 18.58
438-337SR 3 x 11
⁄2 18.58
Union Soc w/EPDM O-ring Seal
Item # Size in. Price
497-005 1
⁄2 $2.20
497-007 3
⁄4 2.52
497-010 1 2.58
497-012 11
⁄4 8.30
497-015 11
⁄2 8.65
497-020 2 11.67
497-025 21
⁄2 16.33
497-030 3 26.04
497-040 4 35.06
150 psi @ 73°F
Union Fipt w/EPDM O-ring Seal
Item # Size in. Price
498-005 1
⁄2 $2.46
498-007 3
⁄4 4.11
498-010 1 5.61
498-012 11
⁄4 9.65
498-015 11
⁄2 9.88
498-020 2 12.13
498-025 21
⁄2 16.98
498-030 3 27.37
498-040 4 36.87
150 psi @ 73°F
Female Adapter Soc x Fipt
Item # Size in. Price
435-003 3
⁄8 $.74
435-005 1
⁄2 .23
435-007 3
⁄4 .28
435-010 1 .34
435-012 11
⁄4 .51
435-015 11
⁄2 .59
435-020 2 .81
435-025 21
⁄2 2.02
435-030 3 2.72
435-040 4 4.53
Special Reinforced
Female Adapter Soc x SR Fipt
Item # Size in. Price
435-002SR 1
⁄4 $2.57
435-003SR 3
⁄8 2.57
435-005SR 1
⁄2 1.41
435-007SR 3
⁄4 2.08
435-010SR 1 3.08
435-012SR 11
⁄4 5.01
435-015SR 11
⁄2 6.14
435-020SR 2 10.72
435-025SR 21
⁄2 16.91
435-030SR 3 19.07
435-040SR 4 32.76
Male Adapter Mipt x Soc
Item # Size in. Price
436-003 3
⁄8 $.70
436-005 1
⁄2 .19
436-007 3
⁄4 .21
436-010 1 .36
436-012 11
⁄4 .45
436-015 11
⁄2 .59
436-020 2 .78
436-025 21
⁄2 2.32
436-030 3 3.38
436-040 4 4.31
Reducer Coupling
Item # Size in. Price
429-101 3
⁄4 x 1
⁄2 $.34
429-130 1 x 1
⁄2 .81
429-131 1 x 3
⁄4 .57
429-166 11
⁄4 x 1
⁄2 1.52
429-167 11
⁄4 x 3
⁄4 1.52
429-168 11
⁄4 x 1 .96
429-209 11
⁄2 x 1
⁄2 1.27
429-210 11
⁄2 x 3
⁄4 1.03
429-211 11
⁄2 x 1 1.59
429-212 11
⁄2 x 11
⁄4 1.03
429-247 2 x 1
⁄2 2.23
429-248 2 x 3
⁄4 2.23
429-249 2 x 1 2.17
429-250 2 x 11
⁄4 2.23
429-251 2 x 11
⁄2 1.63
429-291 21
⁄2 x 11
⁄2 4.35
429-292 21
⁄2 x 2 3.35
429-335 3 x 1 9.88
429-337 3 x 11
⁄2 9.88
429-338 3 x 2 8.76
429-339 3 x 21
⁄2 7.43
429-416 4 x 3
⁄4 11.45
429-417 4 x 1 18.19
429-420 4 x 2 10.61
429-421 4 x 21
⁄2 13.37
429-422 4 x 3 10.94
Reducer Bushing
Flush Style Spig x Soc
Item # Size in. Price
437-072 1
⁄2 x 1
⁄4 $.38
437-073 1
⁄2 x 3
⁄8 .38
437-101 3
⁄4 x 1
⁄2 .21
437-130 1 x 1
⁄2 .38
437-131 1 x 3
⁄4 .38
437-166 11
⁄4 x 1
⁄2 .51
437-167 11
⁄4 x 3
⁄4 .51
437-168 11
⁄4 x 1 .51
437-209 11
⁄2 x 1
⁄2 .55
437-210 11
⁄2 x 3
⁄4 .55
437-211 11
⁄2 x 1 .55
437-212 11
⁄2 x 11
⁄4 .55
437-247 2 x 1
⁄2 .92
437-248 2 x 3
⁄4 .92
437-249 2 x 1 .92
437-250 2 x 11
⁄4 .92
437-251 2 x 11
⁄2 .92
437-287 21
⁄2 x 1
⁄2 1.47
437-288 21
⁄2 x 3
⁄4 1.47
437-289 21
⁄2 x 1 1.47
437-290 21
⁄2 x 11
⁄4 1.47
437-291 21
⁄2 x 11
⁄2 1.47
437-292 21
⁄2 x 2 1.47
437-334 3 x 3
⁄4 2.17
437-335 3 x 1 2.17
437-336 3 x 11
⁄4 2.17
437-337 3 x 11
⁄2 2.17
437-338 3 x 2 2.17
437-339 3 x 21
⁄2 2.17
437-420 4 x 2 4.82
437-421 4 x 21
⁄2 4.82
437-422 4 x 3 4.82
Street Tee Spig x Soc x Soc
Item # Size in. Price
444-005 1
⁄2 $1.30
444-007 3
⁄4 1.75
444-010 1 2.25
444-012 11
⁄4 3.64
444-015 11
⁄2 5.01
444-020 2 8.73
PVC Schedule 40 White Fittings (cont.)
CAUTION
See page 110 for details
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 114
114_114 3/30/14 2:07 PM Page 114
Pipe, Fittings & Cement
Tee (Slip x Slip x Slip)
 Item # Size Price
 401-002L 1
⁄4 $10.78
 401-003L 3
⁄8 10.78
 401-005L 1
⁄2 8.11
 401-007L 3
⁄4 9.27
 401-010L 1 17.35
 401-012L 11
⁄4 27.24
 401-015L 11
⁄2 33.05
 401-020L 2 48.01
 401-025L 21
⁄2 158.27
 401-030L 3 207.55
 401-040L 4 375.73
90° Ell (Slip x Slip)
 Item # Size Price
 406-002L 1
⁄4 $8.78
 406-003L 3
⁄8 8.78
 406-005L 1
⁄2 6.63
 406-007L 3
⁄4 7.23
 406-010L 1 13.15
 406-012L 11
⁄4 23.15
 406-015L 11
⁄2 24.57
 406-020L 2 38.94
 406-025L 21
⁄2 118.22
 406-030L 3 141.44
 406-040L 4 253.24
45° Ell (Slip x Slip)
 Item # Size Price
 417-002L 1
⁄4 $14.08
 417-003L 3
⁄8 14.08
 417-005L 1
⁄2 10.69
 417-007L 3
⁄4 16.49
 417-010L 1 19.82
 417-012L 11
⁄4 28.04
 417-015L 11
⁄2 34.93
 417-020L 2 45.70
 417-025L 21
⁄2 118.38
 417-030L 3 183.76
 417-040L 4 330.06
Coupling (Slip x Slip)
 Item # Size Price
 429-002L 1
⁄4 $5.87
 429-003L 3
⁄8 5.87
 429-005L 1
⁄2 4.38
 429-007L 3
⁄4 5.89
 429-010L 1 10.22
 429-012L 11
⁄4 13.97
 429-015L 11
⁄2 15.00
 429-020L 2 23.40
 429-025L 21
⁄2 51.27
 429-030L 3 80.46
 429-040L 4 116.14
Cap (slip)
 Item # Size Price
 447-002L 1
⁄4 $9.46
 447-003L 3
⁄8 9.48
 447-005L 1
⁄2 7.07
 447-007L 3
⁄4 8.18
 447-010L 1 12.95
 447-012L 11
⁄4 17.99
 447-015L 11
⁄2 19.78
 447-020L 2 23.86
 447-025L 21
⁄2 76.31
 447-030L 3 76.31
 447-04OL 4 170.92
Reducer Bushing (Spig x Slip)
 Item # Size Price
 437-101L 3
⁄4 x 1
⁄2 $6.81
 437-131L 1 x 3
⁄4 12.53
 437-168L 11
⁄4 x 1 16.49
 437-211L 11
⁄2 x 1 17.44
 437-212L 11
⁄2 x 11
⁄4 17.44
 437-251L 2 x 11
⁄2 28.85
 437-292L 21
⁄2 x 2 46.41
 437-338L 3 x 2 68.86
 437-339L 3 x 21
⁄2 68.86
 437-422L 4 x 3 153.83
Male Adapter (Mipt x Slip)
 Item # Size Price
 436-003L 3
⁄8 $7.90
 436-005L 1
⁄2 5.89
 436-007L 3
⁄4 6.63
 436-010L 1 11.62
 436-012L 11
⁄4 14.01
 436-015L 11
⁄2 19.04
 436-020L 2 24.83
 436-025L 21
⁄2 73.68
 436-030L 3 107.64
 436-040L 4 137.27
Cement and Primer
 Item # Description Price/Quart
 10144 Clear Cement $22.16
 10222 Clear Primer 20.29
Female Adapter (Slip x Fipt)
Stainless Steel Reinforced
 Item # Size Price
 435-002SRL 1
⁄4 $12.36
 435-003SRL 3
⁄8 12.36
 435-005SRL 1
⁄2 7.34
 435-007SRL 3
⁄4 9.16
 435-010SRL 1 10.60
 435-012SRL 11
⁄4 16.24
 435-015SRL 11
⁄2 19.07
 435-020SRL 2 25.69
 435-030SRL 3 87.12
 435-040SRL 4 144.12
Pipe
 Nominal Max.
 Pipe Average Average Minimum W.P. Price
 Item # Size O.D. I.D. Wall PSI* Lbs/Ft. Per Ft.
Schedule 40
 34000004C 1
⁄4" .540 .354 .088 390 .081 $1.07
 34000005C 3
⁄8" .675 .483 .091 310 .109 1.23
 34000007C 1
⁄2" .840 .608 .109 300 .161 1.42
 34000008C 3
⁄4" 1.050 .810 .113 240 .214 1.89
 34000009C 1" 1.315 1.033 .133 220 .315 2.85
 34000010C 11
⁄4" 1.660 1.364 .140 180 .426 3.81
 34000011C 11
⁄2" 1.900 1.592 .145 170 .509 4.58
 34000012C 2" 2.375 2.049 .154 140 .682 6.15
 34000013C 21
⁄2" 2.875 2.445 .203 150 1.076 9.71
 34000014C 3" 3.500 3.042 .216 130 1.409 12.69
 34000015C 31
⁄2" 4.000 3.520 .226 120 1.697 16.13
 34000016C 4" 4.500 3.998 .237 110 2.006 19.10
 34000017C **6" x 1
⁄8" 6.625 6.355 .125 45 1.647 22.17
 34000018C 6" 6.625 6.031 .280 90 3.535 34.95
 34000019C 8" 8.625 7.943 .322 80 5.305 52.40
Schedule 80
 32000004C 1
⁄4" .540 .288 .119 570 .100 1.11
 32000005C 3
⁄8" .675 .407 .126 460 .138 1.27
 32000007C 1
⁄2" .840 .528 .147 420 .202 1.90
 32000008C 3
⁄4" 1.050 .724 .154 340 .273 2.51
 32000009C 1" 1.315 .935 .179 320 .402 3.62
 32000010C 11
⁄4" 1.660 1.256 .191 260 .554 4.97
 32000011C 11
⁄2" 1.900 1.476 .200 240 .673 6.15
 32000012C 2" 2.375 1.913 .218 200 .932 8.59
 32000014C 3" 3.500 2.864 .300 190 1.903 17.08
 32000016C 4" 4.500 3.786 .337 160 2.782 25.95
Standard Length - 10 Feet. Custom lengths and sizes available. All pipe is packed in polybags and boxed.
This material complies with the provisions of Title 21 of the United States FDA Code of Federal Regulations,
and is safe for use in food contact applications. Pipe has a UL 94 V-0 rating.
* For water at 73.4 F. with solvent welded joints. ** This Size does not meet schedule 40 criteria.
Clear PVC Pipe & Fittings (Schedule 40)
Harvel Clear™ Rigid PVC piping provides a
versatile, cost-effective alternative for many
piping applications, particularly those where
visual monitoring of processes is critical.
The benefits of rigid PVC piping are well recognized:
exceptional corrosion resistance;
smooth interior walls for unimpeded flow
and reduced sediment buildup; non-contaminating
for purity applications; fast, reliable
solvent-welded connections; good pressurebearing
capability; and ease of handling
and installation, to name a few.
All of these important benefits are now available in a unique product
with optimum clarity. This clarity provides the all-round visibility that
specialized applications demand – whether it be clean room applications, sight glass, dual-containment
or various other processing applications where continuous monitoring is necessary.
FEATURES
n Manufactured to Schedule 40 and
Schedule 80 IPS dimensions
n Full line of 1
⁄4" through 8" Harvel Clear™
fittings
n Simple solvent-welded joining techniques
n Fully compatible with standard PVC pipe,
fittings and valves
n Corrosion resistant
n Non-conductive
n Resists bacterial and biological activity
n Wide range of chemical resistance
n Lightweight, easy to handle and install
n Neatly boxed and packaged on-line, providing
clean, scratch-free quality with every order
n Standard plain-end 10-foot lengths; belling
and custom lengths available
n Lower overall installed cost than alternatives
Now Available! Clear PVC SCH80 Pipe!
CAUTION
See page 110 for details
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 115
115_115 3/30/14 2:09 PM Page 115
Pipe, Fittings & Cement
Gray Industrial PVC Schedule 40 Pressure Fittings and Pipe
Tee (Slip x Slip x Slip)
 Item # Size Price
 401-005G 1
⁄2 $.55
 401-007G 3
⁄4 .63
 401-010G 1 1.18
 401-012G 11
⁄4 1.84
 401-015G 11
⁄2 2.24
 401-020G 2 3.23
 401-025G 21
⁄2 10.69
 401-030G 3 14.05
 401-040G 4 25.39
90° Ell (Slip x Slip)
 Item # Size Price
 406-003G 3
⁄8 $2.20
 406-005G 1
⁄2 .44
 406-O07G 3
⁄4 .51
 406-010G 1 .89
 406-O12G 11
⁄4 1.57
 406-015G 11
⁄2 1.65
 406-020G 2 2.66
 406-025G 21
⁄2 7.98
 406-030G 3 9.55
 406-04OG 4 17.11
45° Ell
(Slip x Slip)
 Item # Size Price
 417-005G 1
⁄2 $.75
 417-007G 3
⁄4 1.12
 417-O10G 1 1.34
 417-012G 11
⁄4 1.91
 417-015G 11
⁄2 2.37
 417-020G 2 3.09
 417-025G 21
⁄2 7.99
 417-030G 3 12.43
 417-040G 4 22.30
Cross (Soc)
 Item # Size Price
 420-005G 1
⁄2 $1.66
 420-007G 3
⁄4 2.77
 420-010G 1 3.46
 420-012G 11
⁄4 4.57
 420-015G 11
⁄2 5.19
 420-020G 2 7.65
 420-025G 21
⁄2 16.25
 420-030G 3 19.92
 420-040G 4 29.52
Female Adapter (Slip x Fipt)
 Item # Size Price
 435-005G 1
⁄2 $.45
 435-007G 3
⁄4 .63
 435-010G 1 .75
 435-012G 11
⁄4 1.11
 435-015G 11
⁄2 1.31
 435-020G 2 1.75
 435-025G 21
⁄2 4.37
 435-030G 3 5.89
 435-040G 4 9.74
 435-101G 3
⁄4 x 1
⁄2 .89
 435-131G 1 x 3
⁄4 1.18
Coupling (Slip x Slip)
 Item # Size Price
 429-005G 1
⁄2 $.29
 429-007G 3
⁄4 .42
 429-010G 1 .69
 429-012G 11
⁄4 .93
 429-015G 11
⁄2 1.02
 429-020G 2 1.59
 429-025G 21
⁄2 3.46
 429-030G 3 5.44
 429-040G 4 7.85
Union (Fipt w/EPDM O-ring Seal)
 Item # Size Price
 498-005G 1
⁄2 $4.49
 498-007G 3
⁄4 5.13
 498-010G 1 5.24
 498-012G 11
⁄4 16.92
 498-015G 11
⁄2 17.65
 498-020G 2 23.97
Cap (Slip)
 Item # Size Price
 447-003G 3
⁄8 $1.11
 447-005G 1
⁄2 .42
 447-007G 3
⁄4 .47
 447-010G 1 .75
 447-012G 11
⁄4 1.02
 447-015G 11
⁄2 1.11
 447-020G 2 1.34
 447-025G 21
⁄2 4.30
 447-030G 3 4.69
 447-040G 4 10.69
Male Adapter (Mipt x Slip)
 Item # Size Price
 436-005G 1
⁄2 $.40
 436-007G 3
⁄4 .44
 436-010G 1 .78
 436-012G 11
⁄4 .93
 436-015G 11
⁄2 1.31
 436-020G 2 1.66
 436-025G 21
⁄2 4.97
 436-030G 3 7.28
 436-040G 4 9.27
 436-074G 1
⁄2 x 3
⁄4 .78
 436-101G 3
⁄4 x 1
⁄2 .71
Fitting Adapter
(Spig x Fipt)
 Item # Size Price
 478-005G 1
⁄2 $.56
 478-007G 3
⁄4 .65
 478-010G 1 1.04
 478-012G 11
⁄4 1.68
 478-015G 11
⁄2 2.09
 478-020G 2 2.58
 478-030G 3 8.93
 478-040G 4 14.77
Pipe
 Size Min. Max. WP
 (in) Item # O.D. Wall (psi) Price/Ft.
 3
⁄8 225411 .675 .091 620 $.60
 1
⁄2 225412 .840 .109 600 .37
 3
⁄4 225413 1.05 .113 480 .48
 1 225414 1.315 .133 450 .72
 11
⁄4 225415 1.66 .140 370 .97
 11
⁄2 225416 1.90 .145 330 1.08
 2 225417 2.375 .154 280 1.45
 21
⁄2 225418 2.875 .203 300 2.52
 3 225419 3.5 .216 260 2.97
 4 225420 4.5 .237 220 4.23
 6 225421 6.625 .280 180 7.47
 8 225422 8.62 .322 160 11.20
Sold in 20' Lengths
Reducing Bushing
(Spig x Fipt)
 Size in. Item # Price
 3
⁄4 x 1
⁄2 437-101G $.44
 1 x 1
⁄2 437-130G .80
 1 x 3
⁄4 437-131G .80
 11
⁄4 x 1
⁄2 437-166G 1.05
 11
⁄4 x 3
⁄4 437-167G 1.05
 11
⁄4 x 1 437-168G 1.05
 11
⁄2 x 1
⁄2 437-209G 1.12
 11
⁄2 x 3
⁄4 437-210G 1.12
 11
⁄2 x 1 437-211G 1.12
 11
⁄2 x 11
⁄4 437-212G 1.12
 2 x 1
⁄2 437-247G 1.86
 2 x 3
⁄4 437-248G 1.86
 2 x 1 437-249G 1.86
 2 x 11
⁄4 437-250G 1.86
 2 x 11
⁄2 437-251G 1.86
 21
⁄2 x 11
⁄4 437-290G 2.98
 21
⁄2 x 11
⁄2 437-291G 2.98
 21
⁄2 x 2 437-292G 2.98
 3 x 1 437-335G 4.41
 3 x 11
⁄4 437-336G 4.41
 3 x 11
⁄2 437-337G 4.41
 3 x 2 437-338G 4.41
 3 x 21
⁄2 437-339G 4.41
 4 x 2 437-420G 9.86
 4 x 3 437-422G 9.86
Bushings are SCH80
Reducing Bushing M.P.T. x F.P.T.
 Size in. Item # Price
 3
⁄4 x 1
⁄2 439-101G $1.23
 1 x 1
⁄2 439-130G 1.72
 1 x 3
⁄4 439-131G 1.72
 11
⁄4 x 1
⁄2 439-166G 2.54
 11
⁄4 x 3
⁄4 439-167G 2.54
 11
⁄4 x 1 439-168G 2.54
 11
⁄2 x 3
⁄4 439-210G 3.06
 11
⁄2 x 1 439-211G 3.06
 11
⁄2 x 11
⁄4 439-212G 3.06
 2 x 1 439-249G 3.28
 2 x 11
⁄4 439-250G 3.28
 2 x 11
⁄2 439-251G 3.28
Reducing Bushing
(Spig x Soc)
 Size in. Item # Price
 1
⁄2 x 3
⁄8 438-073G $.90
 1 x 1
⁄2 438-130G 1.10
 1 x 3
⁄4 438-131G 1.10
 11
⁄4 x 1
⁄2 438-166G 1.72
 11
⁄4 x 3
⁄4 438-167G 1.72
 11
⁄4 x 1 438-168G 1.72
 11
⁄2 x 1
⁄2 438-209G 1.98
 11
⁄2 x 3
⁄4 438-210G 1.98
 11
⁄2 x 1 438-211G 1.98
 11
⁄2 x 11
⁄4 438-212G 1.98
 2 x 1
⁄2 438-247G 2.63
 2 x 3
⁄4 438-248G 2.63
 2 x 1 438-249G 2.63
 2 x 11
⁄4 438-250G 2.63
 2 x 11
⁄2 438-251G 2.63
 21
⁄2 x 11
⁄2 438-291G 3.82
 21
⁄2 x 2 438-292G 3.82
 3 x 2 438-338G 4.41
 4 x 2 438-420G 9.83
 4 x 3 438-422G 9.83
Bushings are SCH80
Extensive
Inventory
Extensive
Inventory
CAUTION
See page 110 for details
Union (Soc w/EPDM O-ring Seal)
 Item # Size Price
 497-005G 1
⁄2 $4.49
 497-007G 3
⁄4 5.13
 497-010G 1 5.24
 497-012G 11
⁄4 16.92
 497-015G 11
⁄2 17.65
 497-020G 2 23.16
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 116
116_116 3/30/14 3:53 PM Page 116
Pipe, Fittings & Cement
CPVC Schedule 80 Fittings, Unions, Flanges, Tank Adapters & Pipe Nipples
CPVC Socket Tee
Size in. Item # Price
 1
⁄4 801-002C $3.27
 3
⁄8* 801-003C 3.27
 1
⁄2 801-005C 3.27
 3
⁄4 801-007C 3.31
 1 801-010C 4.07
 11
⁄4 801-012C 8.59
 11
⁄2 801-015C 9.84
 2 801-020C 10.96
 21
⁄2 801-025C 27.89
 3 801-030C 27.89
 4 801-040C 37.09
 6 801-060C 96.57
 8 801-080C 276.57
CPVC Socket 90° Elbow
Size in. Item # Price
 1
⁄4 806-002C $3.55
 3
⁄8 806-003C 3.55
 1
⁄2 806-005C 1.40
 3
⁄4 806-007C 1.78
 1 806-010C 2.83
 11
⁄4 806-012C 6.12
 11
⁄2 806-015C 6.82
 2 806-020C 8.24
 21
⁄2 806-025C 18.94
 3 806-030C 21.44
 4 806-040C 38.62
 6 806-060C 77.59
 8 806-080C 189.86
CPVC Socket 45° Elbow
Size in. Item # Price
 1
⁄4 817-002C $5.29
 3
⁄8 817-003C 5.29
 1
⁄2 817-005C 1.72
 3
⁄4 817-007C 2.45
 1 817-010C 3.90
 11
⁄4 817-012C 7.68
 11
⁄2 817-015C 7.89
 2 817-020C 8.83
 21
⁄2 817-025C 18.09
 3 817-030C 23.25
 4 817-040C 31.91
 6 817-060C 98.26
 8 817-080C 204.46
CPVC Socket Cap
Size in. Item # Price
 1
⁄4 847-002C $2.53
 3
⁄8 847-003C 2.53
 1
⁄2 847-005C 2.29
 3
⁄4 847-007C 3.27
 1 847-010C 5.78
 11
⁄4 847-012C 6.32
 11
⁄2 847-015C 6.32
 2 847-020C 6.67
 21
⁄2 847-025C 22.45
 3 847-030C 24.61
 4 847-040C 25.01
 6 847-060C 82.73
 8 847-080C 251.06
CPVC Socket Coupling
Size in. Item # Price
 1
⁄4 829-002C $3.78
 3
⁄8 829-003C 3.78
 1
⁄2 829-005C 1.47
 3
⁄4 829-007C 2.05
 1 829-010C 2.77
 11
⁄4 829-012C 4.15
 11
⁄2 829-015C 5.24
 2 829-020C 6.06
 21
⁄2 829-025C 13.50
 3 829-030C 14.69
 4 829-040C 19.24
 6 829-060C 45.31
 8 829-080C 122.41
CPVC Nipples 1
⁄4"-12" Standard Stock lengths through 24" (Custom lengths & machine threaded also available)
 Length-Close Length-Short Length-2" Length-3" Length-4" Length-5" Length-6"
Dia. in. Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 1⁄4 880-005C $1.66 880-015C $1.79 880-020C $1.94 880-030C $2.25 880-040C $2.55 880-050C $2.85 880-060C $3.10
 3
⁄8 881-005C 1.90 881-015C 1.99 881-020C 2.25 881-030C 2.67 881-040C 2.97 881-050C 3.42 881-060C 3.57
 1
⁄2 882-005C 1.79 882-015C 1.94 882-020C 2.14 882-030C 2.43 882-040C 2.85 882-050C 3.20 882-060C 3.61
 3
⁄4 883-005C 2.20 883-015C 2.36 883-020C 2.55 883-030C 2.91 883-040C 3.36 883-050C 3.73 883-060C 4.16
 1 884-005C 2.67 884-015C Call 884-020C 2.91 884-030C 3.61 884-040C 4.16 884-050C 4.69 884-060C 5.44
 11
⁄4 885-005C 3.36 885-015C Call 885-020C 3.73 885-030C 4.69 885-040C 5.84 885-050C 6.87 885-060C 7.90
 11
⁄2 886-005C 3.73 886-015C Call 886-020C 4.16 886-030C 5.17 886-040C 6.26 886-050C 7.31 886-060C 8.33
 2 887-005C 5.77 887-015C Call 887-020C Call 887-030C 6.87 887-040C 8.14 887-050C 9.41 887-060C 10.67
 21
⁄2 888-005C 10.47 888-015C Call 888-020C Call 888-030C 11.48 888-040C 14.01 888-050C 16.73 888-060C 19.63
 3 889-005C 13.55 889-015C Call 889-020C Call 889-030C 13.55 889-040C 17.73 889-050C 20.63 889-060C 23.57
 4 890-005C 20.90 890-015C Call 890-020C Call 890-030C Call 890-040C 25.08 890-050C 29.22 890-060C 33.39
 6 892-005C 49.45 892-015C Call 892-020C Call 892-030C Call 892-040C Call 892-050C 86.11 892-060C 100.50
Adding (1) in front of part # = Toe (thread one end), (P) at end of part # = Plain end
CPVC Schedule 80 Pipe
 Nominal Max. W.P. Outside Min. Wall
 Pipe Size @73.4°F Diam. Thickness
 (In.) Type I (In.) (In.) Item # Price/Ft.
 1
⁄4 1130 .540 .119 CPV14P $1.55
 3
⁄8 920 .675 .126 CPV38P 1.76
 1
⁄2 850 .840 .147 CPV12P 1.82
 3
⁄4 690 1.050 .154 CPV34P 1.49
 1 630 1.315 .179 CPV1P 2.58
 11
⁄4 520 1.660 .191 CPV114P 3.57
 11
⁄2 470 1.900 .200 CPV112P 4.33
 2 400 2.375 .218 CPV2P 5.99
 21
⁄2 425 2.875 .276 CPV212P 9.11
 3 375 3.500 .300 CPV3P 11.30
 4 324 4.500 .337 CPV4P 16.46
 6 280 6.625 .432 CPV6P 31.65
 8 250 8.625 .500 CPV8P 53.98
 10 230 10.750 .593 CPVI1P 87.54
Fabricated Expansion Joints with EPDM O-rings
 6" Travel 12" Travel
Size in. Item # Price Item # Price
 1
⁄2 826-005X6 $216.70 826-005X12 $243.70
 3
⁄4 826-007X6 232.94 826-007X12 257.76
 1 826-010X6 235.55 826-010X12 308.86
 11
⁄4 826-012X6 336.78 826-012X12 393.79
 11
⁄2 826-015X6 290.33 826-015X12 312.70
 2 826-020X6 324.74 826-020X12 368.88
 21
⁄2 826-025X6 573.87 826-025X12 619.69
 3 826-030X6 436.35 826-030X12 476.54
 4 826-040X6 412.65 826-040X12 470.09
 6 826-060X6 679.83 826-060X12 779.85
1
⁄2" - 2" 235 psi @ 73°F, 21
⁄2" - larger 150 psi @ 73°F
Coefficient of Thermal Linear Expansion
PVC 1120 = 2.8 x 10-5 in/in/°F
CPVC 4120 = 3.4 x 10-5 in/in/°F
n Compact Installation -
Eliminates Need For
Expansion Loops
n EPDM or Viton® Pressure
O-ring Seal with Dual
“Wiper” O-ring for
Extended Life
n Support Piston Eliminates
Binding, Minimizes
Alignment Problems
n Excellent For Use as a
Repair Coupling
Note: Pipe sold in 20 foot sections.
PVC & CPVC Schedule 80 Expansion Joint Repair Couplings
Linear expansion and contraction from temperature fluctuations can be a major problem in
thermoplastic piping systems. Forces left uncontrolled can literally tear systems apart. Spears®
Expansion Joint allows a telescoping movement of an inner pipe within a firmly mounted
outer tube to eliminate such damage. See the full line of Elastomer Expansion, Repair
Couplings & Short Repair Couplings at www.fwwebb.com/plastics.
Triple O-ring Sealed
Telescoping Design Available
with 6” and 12” Travel
CPVC
Union
Socket
With FKM O-ring Seal
Size in. Item # Price
 1
⁄4 857-002C $9.38
 3
⁄8 857-003C 9.38
 1
⁄2 8057-005C 6.30
 3
⁄4 8057-007C 6.61
 1 8057-010C 7.91
 11
⁄4 8057-012C 16.03
 11
⁄2 8057-015C 16.32
 2 8057-020C 27.03
 21
⁄2 8057-025C 44.33
 3 8057-030C 56.10
 4 8057-040C 71.69
 6 8057-060C 160.03
CPVC
Threaded
Union
With FKM O-ring Seal
Size in. Item # Price
 1
⁄4 858-002C $10.73
 3
⁄8 858-003C 10.73
 1
⁄2 8058-005C 6.79
 3
⁄4 8058-007C 12.01
 1 8058-010C 16.56
 11
⁄4 8058-012C 31.55
 11
⁄2 8058-015C 31.55
 2 8058-020C 35.66
 21
⁄2 8058-025C 57.45
 3 8058-030C 109.01
 4 8058-040C 117.17
 6 8058-060C 260.36
CAUTION
See page 110 for details
www.facebook.com/webbplastics
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 117
117_117 3/31/14 7:43 AM Page 117
Pipe, Fittings & Cement
CPVC Fittings
Threaded Tee
 Size in. Item # Price
 1
⁄4 805-002C $7.67 3⁄8 805-003C 7.67
 1
⁄2 805-005C 7.67
 3
⁄4 805-007C 11.03
 1 805-010C 11.89
 11
⁄4 805-012C 11.96
 11
⁄2 805-015C 12.56
 2 805-020C 13.95
 21
⁄2 805-025C 68.55
 3 805-030C 79.54
 4 805-040C 188.42
Threaded Cap
 Size in. Item # Price
 1
⁄4 848-002C $3.14 3⁄8 848-003C 3.14
 1
⁄2 848-005C 2.68
 3
⁄4 848-007C 4.46
 1 848-010C 6.22
 11
⁄4 848-012C 11.12
 11
⁄2 848-015C 11.39
 2 848-020C 16.41
 21
⁄2 848-025C 37.94
 3 848-030C 49.77
 4 848-040C 72.28
Threaded Coupling
 Size in. Item # Price
 1
⁄4 830-002C $5.04 3⁄8 830-003C 5.04
 1
⁄2 830-005C 4.12
 3
⁄4 830-007C 6.67
 1 830-010C 7.57
 11
⁄4 830-012C 8.05
 11
⁄2 830-015C 8.63
 2 830-020C 10.18
 21
⁄2 830-025C 18.26
 3 830-030C 21.26
 4 830-040C 43.34
Threaded 90° Elbow
 Size in. Item # Price
 1
⁄4 808-002C $3.95 3⁄8* 808-003C 3.95
 1
⁄2 808-005C 2.29
 3
⁄4 808-007C 3.44
 1 808-010C 4.82
 11
⁄4 808-012C 9.25
 11
⁄2 808-015C 9.96
 2 808-020C 13.35
 21
⁄2 808-025C 41.40
 3 808-030C 44.40
 4 808-040C 69.49
Threaded 45° Elbow
 Size in. Item # Price
 1
⁄4 819-002C $5.25 3⁄8 819-003C 5.25
 1
⁄2 819-005C 4.95
 3
⁄4 819-007C 5.47
 1 819-010C 6.01
 11
⁄4 819-012C 10.25
 11
⁄2 819-015C 10.25
 2 819-020C 13.55
 21
⁄2 819-025C 25.68
 3 819-030C 36.99
 4 819-040C 58.17
Threaded Plug
 Size in. Item # Price
 1
⁄4 850-002C $2.51 3⁄8 850-003C 2.51
 1
⁄2 850-005C 2.19
 3
⁄4 850-007C 2.77
 1 850-010C 4.55
 11
⁄4 850-012C 6.88
 11
⁄2 850-015C 5.71
 2 850-020C 7.77
 21
⁄2 850-025C 13.20
 3 850-030C 14.11
 4 850-040C 16.37
Reducing Bushing
Male Slip x Socket
 Size in. Item # Price
 3
⁄8 x 1
⁄4 837-052C $3.25
 1
⁄2 x 1
⁄4 837-072C 3.25
 1
⁄2 x 3
⁄8 837-073C 3.25
 3
⁄4 x 1
⁄2 837-101C 1.66
 1 x 1
⁄2 837-130C 2.57
 1 x 3
⁄4 837-131C 2.57
 11
⁄4 x 1
⁄2 837-166C 6.84
 11
⁄4 x 3
⁄4 837-167C 6.84
 11
⁄4 x 1 837-168C 6.84
 11
⁄2 x 1
⁄2 837-209C 7.73
 11
⁄2 x 3
⁄4 837-210C 7.73
 11
⁄2 x 1 837-211C 7.73
 11
⁄2 x 11
⁄4 837-212C 7.73
 2 x 1
⁄2 837-247C 9.97
 2 x 3
⁄4 837-248C 9.97
 2 x 1 837-249C 9.97
 2 x 11
⁄4 837-250C 9.97
 2 x 11
⁄2 837-251C 9.97
 21
⁄2 x 11
⁄4 837-290C 12.15
 21
⁄2 x 11
⁄2 837-291C 12.15
 21
⁄2 x 2 837-292C 12.15
 3 x 1 837-335C 18.48
 3 x 11
⁄4 837-336C 18.48
 3 x 11
⁄2 837-337C 18.48
 3 x 2 837-338C 18.48
 3 x 21
⁄2 837-339C 18.48
 4 x 2 837-420C 20.46
Threaded Flange
150 lbs. ANSI
 Size in. Item # Price
 1
⁄2 852-005C $9.16
 3
⁄4 852-007C 11.11
 1 852-010C 12.10
 11
⁄4 852-012C 16.81
 11
⁄2 852-015C 17.78
 2 852-020C 18.11
 21
⁄2 852-025C 29.41
 3 852-030C 29.19
 4 852-040C 45.34
Van Stone flanges available.
Blind Flange
150 lbs. ANSI
 Size in. Item # Price
 1
⁄2 853-005C $9.80
 3
⁄4 853-007C 10.64
 1 853-010C 13.26
 11
⁄4 853-012C 14.99
 11
⁄2 853-015C 20.99
 2 853-020C 22.07
 21
⁄2 853-025C 33.39
 3 853-030C 41.48
 4 853-040C 56.20
 6 853-060C 94.20
 8 853-080C 174.78
Socket Flange
150 lbs. ANSI
 Size in. Item # Price
 1
⁄2 854-005C $6.59
 3
⁄4 854-007C 6.75
 1 854-010C 7.36
 11
⁄4 854-012C 8.98
 11
⁄2 854-015C 9.97
 2 854-020C 12.07
 21
⁄2 854-025C 25.03
 3 854-030C 26.20
 4 854-040C 35.39
 5 854-050C 60.25
 6 854-060C 60.25
 8 854-080C 181.32
Van Stone flanges available.
Reducing Bushing
Male Slip x F.P.T.
 Size in. Item # Price
 3
⁄8 x 1
⁄4 838-052C $3.48
 1
⁄2 x 1
⁄8 838-071C 3.48
 1
⁄2 x 1
⁄4 838-072C 3.48
 1
⁄2 x 3
⁄8 838-073C 3.48
 3
⁄4 x 1
⁄4 838-098C 3.90
 3
⁄8 x 1
⁄4 838-099C 3.90
 3
⁄4 x 1
⁄2 838-101C 1.83
 1 x 3
⁄8 838-129C 5.17
 1 x 1
⁄2 838-130C 2.29
 1 x 3
⁄4 838-131C 2.29
 11
⁄4 x 3
⁄4 838-166C 7.40
 11
⁄4 x 1 838-167C 7.40
 11
⁄2 x 1
⁄2 838-168C 7.40
 11
⁄2 x 1
⁄2 838-209C 9.13
 11
⁄2 x 3
⁄4 838-210C 9.13
 11
⁄2 x 1 838-211C 9.13
 11
⁄2 x 11
⁄4 838-212C 9.13
 2 x 1
⁄2 838-247C 12.53
 2 x 3
⁄4 838-248C 12.53
 2 x 1 838-249C 12.53
 2 x 11
⁄4 838-250C 12.53
 2 x 11
⁄2 838-251C 12.53
 21
⁄2 x 1
⁄2 838-287C 20.05
 21
⁄2 x 3
⁄4 838-288C 20.05
 21
⁄2 x 1 838-289C 20.05
 21
⁄2 x 11
⁄4 838-290C 20.05
 21
⁄2 x 11
⁄2 838-291C 19.93
 21
⁄2 x 2 838-292C 19.93
 3 x 3
⁄4 838-334C 53.05
 3 x 1 838-335C 53.05
 3 x 11
⁄4 838-336C 46.40
 3 x 11
⁄2 838-337C 46.40
 3 x 2 838-338C 44.39
 3 x 21
⁄2 838-339C 44.74
 4 x 2 838-420C 90.43
Reducing Bushing
M.P.T. x F.P.T.
 Size in. Item # Price
 3
⁄8 x 1
⁄4 839-052C $4.68
 1
⁄2 x 1
⁄4 839-072C 4.68
 1
⁄2 x 3
⁄8 839-073C 4.68
 3
⁄4 x 1
⁄4 839-098C 5.17
 3
⁄4 x 3
⁄8 839-099C 5.17
 3
⁄4 x 1
⁄2 839-101C 2.23
 1 x 1
⁄4 839-128C 5.59
 1 x 3
⁄8 839-129C 5.59
 1 x 1
⁄2 839-130C 3.75
 1 x 3
⁄4 839-131C 3.75
 11
⁄4 x 1
⁄2 839-166C 7.42
 11
⁄4 x 3
⁄4 839-167C 7.42
 11
⁄4 x 1 839-168C 7.42
 11
⁄2 x 1
⁄2 839-209C 8.95
 11
⁄2 x 3
⁄4 839-210C 8.95
 11
⁄2 x 1 839-211C 8.95
 11
⁄2 x 11
⁄4 839-212C 8.87
 2 x 1
⁄2 839-247C 9.93
 2 x 3
⁄4 839-248C 9.93
 2 x 1 839-249C 9.93
 2 x 11
⁄4 839-250C 9.93
 2 x 11
⁄2 839-251C 8.87
 21
⁄2 x 2 839-292C 23.82
 3 x 11
⁄2 839-337C 32.06
 3 x 2 839-338C 32.06
 3 x 21
⁄2 839-339C 32.06
 4 x 2 839-420C 55.06
 4 x 3 839-422C 55.06
Coupling Adapter
Socket x Thread
 Size in. Item # Price
 1
⁄4 835-002C $5.08
 3
⁄8 835-003C 5.08
 1
⁄2 835-005C 2.51
 3
⁄4 835-007C 2.66
 1 835-010C 6.12
 11
⁄4 835-012C 6.27
 11
⁄2 835-015C 7.31
 2 835-020C 12.60
 21
⁄2 835-025C 24.17
 3 835-030C 49.59
 4 835-040C 82.51
PVC and CPVC are not recommended
for compressed air or gas service.
Coupling Adapter
Male Adapter
 Size in. Item # Price
 1
⁄2 836-005C $2.02
 3
⁄4 836-007C 2.46
 1 836-010C 4.12
 11
⁄4 836-012C 6.08
 11
⁄2 836-015C 8.20
 2 836-020C 11.14
 21
⁄2 836-025C 30.40
 3 836-030C 40.84
 4 836-040C 69.02
Union
Socket
Size EPDM O-ring Price Viton O-ring Price
1
⁄4 897-002C $9.95 857-002C $10.69 3
⁄8 897-003C 9.95 857-003C 10.69 1
⁄2 8097-005C 6.68 8057-005C 7.19 3
⁄4 8097-007C 6.92 8057-007C 7.43
1 8097-010C 8.08 8057-010C 8.69
11
⁄4 8097-012C 16.78 8057-012C 18.05
11
⁄2 8097-015C 17.10 8057-015C 18.38
2 8097-020C 28.32 8057-020C 30.45
21
⁄2 8097-025C 46.92 8057-025C 50.44
3 8097-030C 58.79 8057-030C 63.22
4 8097-040C 75.18 8057-040C 80.84
6 8097-060C 167.06 8057-060C 179.64
Union
Threaded
Size EPDM O-ring Price Viton O-ring Price
1
⁄4 898-002C $11.18 858-002C $12.02 3
⁄8 898-003C 11.18 858-003C 12.02 1
⁄2 8098-005C 7.09 8058-005C 7.62 3
⁄4 8098-007C 12.52 8058-007C 13.47
1 8098-010C 17.27 8058-010C 18.57
11
⁄4 8098-012C 32.93 8058-012C 35.41
11
⁄2 8098-015C 32.93 8058-015C 35.41
2 8098-020C 37.20 8058-020C 40.00
21
⁄2 8098-025C 52.40 8058-025C 56.35
3 8098-030C 104.26 8058-030C 112.09
4 8098-040C 121.37 8058-040C 130.51
6 8098-060C 269.57 8058-060C 289.85
CAUTION
See page 110 for details
Webb 150#
Full Face
Flange Gaskets
See page 120.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 118
118_118 3/30/14 3:57 PM Page 118
Pipe, Fittings & Cement
PVC Fittings (Sched ule 80)
PVC
Tee Socket
 Size Item # Price
 1
⁄4 801-002 $2.40
 3
⁄8 801-003 2.40
 1
⁄2 801-005 2.40
 3
⁄4 801-007 2.51
 1 801-010 3.16
 11
⁄4 801-012 8.64
 11
⁄2 801-015 8.64
 2 801-020 10.80
 21
⁄2 801-025 11.76
 3 801-030 14.69
 4 801-040 17.00
 6 801-060 58.09
 8 801-080 134.68
PVC 90°
Elbow Socket
 Size Item # Price
 1
⁄4 806-002 $.86
 3
⁄8 806-003 .86
 1
⁄2 806-005 .86
 3
⁄4 806-007 1.09
 1 806-010 1.76
 11
⁄4 806-012 2.36
 11
⁄2 806-015 2.51
 2 806-020 3.03
 21
⁄2 806-025 7.11
 3 806-030 7.99
 4 806-040 12.14
 6 806-060 34.53
 8 806-080 95.18
PVC
Threaded Coupling
 Size Item # Price
 1
⁄4 830-002 $1.84
 3
⁄8 830-003 1.84
 1
⁄2 830-005 1.72
 3
⁄4 830-007 2.48
 1 830-010 2.64
 11
⁄4 830-012 3.27
 11
⁄2 830-015 7.28
 2 830-020 7.61
 21
⁄2 830-025 18.19
 3 830-030 21.31
 4 830-040 36.92
PVC
Threaded Plug
 Size Item # Price
 1
⁄4 850-002 $1.63
 3
⁄8 850-003 1.63
 1
⁄2 850-005 1.43
 3
⁄4 850-007 1.51
 1 850-010 1.84
 11
⁄4 850-012 2.71
 11
⁄2 850-015 3.33
 2 850-020 3.39
 21
⁄2 850-025 9.50
 3 850-030 11.08
 4 850-040 21.56
 6 850-060 25.61
PVC
Union Thread
Size Viton O-ring Price EPDM O-ring Price
1
⁄4 858-002 $6.36 896-002 $6.28 3
⁄8 858-003 6.36 896-003 6.28 1
⁄2 858-005 3.67 896-005 3.62 3
⁄4 8058-007 5.13 8096-007 5.06
1 8058-010 6.82 8096-010 6.73
11
⁄4 8058-012 13.01 8096-012 12.84
11
⁄2 8058-015 16.11 8096-015 15.90
2 8058-020 24.78 8096-020 24.47
21
⁄2 8058-025 41.90 8096-025 32.77
3 8058-030 62.84 8096-030 62.07
4 8058-040 73.87 8096-040 72.60
6 8058-060164.31 8096-060 161.27
235 PSI maximum internal pressure
rating @73°F
PVC
Threaded Tee
 Size Item # Price
 1
⁄4 805-002 $2.79
 3
⁄8 805-003 2.79
 1
⁄2 805-005 2.79
 3
⁄4 805-007 3.08
 1 805-010 6.83
 11
⁄4 805-012 7.23
 11
⁄2 805-015 8.77
 2 805-020 9.41
 21
⁄2 805-025 34.26
 3 805-030 35.78
 4 805-040 58.16
PVC
Threaded Cap
 Size Item # Price
 1
⁄4 848-002 $1.89
 3
⁄8 848-003 1.89
 1
⁄2 848-005 1.89
 3
⁄4 848-007 2.11
 1 848-010 2.66
 11
⁄4 848-012 3.17
 11
⁄2 848-015 3.62
 2 848-020 7.11
 21
⁄2 848-025 14.20
 3 848-030 16.72
 4 848-040 29.43
PVC 45°
Threaded Elbow
 Size Item # Price
 1
⁄4 819-002 $3.47
 3
⁄8 819-003 3.47
 1
⁄2 819-005 3.17
 3
⁄4 819-007 3.39
 1 819-010 4.26
 11
⁄4 819-012 6.50
 11
⁄2 819-015 8.31
 2 819-020 12.13
 21
⁄2 819-025 23.97
 3 819-030 38.57
 4 819-040 55.32
PVC 90°
Threaded Elbow
 Size Item # Price
 1
⁄4 808-002 $2.11
 3
⁄8 808-003 2.11
 1
⁄2 808-005 1.98
 3
⁄4 808-007 2.48
 1 808-010 3.08
 11
⁄4 808-012 3.34
 11
⁄2 808-015 4.72
 2 808-020 5.32
 21
⁄2 808-025 20.71
 3 808-030 33.36
 4 808-040 58.69
PVC 45°
Elbow Socket
 Size Item # Price
 1
⁄4 817-002 $3.06
 3
⁄8 817-003 3.06
 1
⁄2 817-005 1.62
 3
⁄4 817-007 2.43
 1 817-010 3.68
 11
⁄4 817-012 4.67
 11
⁄2 817-015 5.52
 2 817-020 7.17
 21
⁄2 817-025 15.03
 3 817-030 18.31
 4 817-040 32.96
 6 817-060 41.52
 8 817-080 89.98
PVC
Cap Socket
 Size Item # Price
 1
⁄4 847-002 $1.96
 3
⁄8 847-003 1.96
 1
⁄2 847-005 1.52
 3
⁄4 847-007 1.59
 1 847-010 2.82
 11
⁄4 847-012 3.40
 11
⁄2 847-015 3.40
 2 847-020 6.73
 21
⁄2 847-025 13.72
 3 847-030 16.06
 4 847-040 27.08
 6 847-060 67.37
 8 847-080 86.47
PVC
Coupling Socket
 Size Item # Price
 1
⁄4 829-002 $2.48
 3
⁄8 829-003 2.48
 1
⁄2 829-005 1.54
 3
⁄4 829-007 2.09
 1 829-010 2.13
 11
⁄4 829-012 3.27
 11
⁄2 829-015 3.52
 2 829-020 3.78
 21
⁄2 829-025 9.29
 3 829-030 11.91
 4 829-040 13.37
 5 829-050F 47.40
 6 829-060 28.77
 8 829-080 39.14
PVC
Union Socket
Size Viton O-ring Price EPDM O-ring Price
1
⁄4 897-002 $5.82 857-002 $5.90 3
⁄8 897-003 5.82 857-003 5.90 1
⁄2 897-005 3.14 857-005 3.17 3
⁄4 8097-007 3.97 8057-007 4.01
1 8097-010 4.53 8057-010 4.58
11
⁄4 8097-012 8.99 8057-012 9.09
11
⁄2 8097-015 10.17 8057-015 10.30
2 8097-020 13.79 8057-020 13.96
21
⁄2 8097-025 21.91 8057-025 22.36
3 8097-030 25.66 8057-030 25.98
4 8097-040 35.49 8057-040 36.19
6 8097-060 78.87 8057-060 80.42
235 PSI maximum internal pressure
rating @73°F
PVC Schedule
80 Pipe
 Nominal Max. W.P. Outside Min. Wall
 Pipe Size @73.4°F Diam. Thickness Item # Price/ft.
 1
⁄4 1130 .540 .119 32000004 $.66
 3
⁄8 920 .675 .126 32000005 .87
 1
⁄2 850 .840 .147 32000007 .79
 3
⁄4 690 1.050 .154 32000008 .85
 1 630 1.315 .179 32000009 .89
 11
⁄4 520 1.660 .191 32000010 1.14
 11
⁄2 470 1.900 .200 32000011 1.28
 2 400 2.375 .218 32000012 1.80
 21
⁄2 425 2.875 .276 32000013 2.96
 3 375 3.500 .300 32000014 3.73
 4 324 4.500 .337 32000016 5.35
 6 280 6.625 .432 32000018 10.44
 8 250 8.625 .500 32000019 15.68
 10 230 10.750 .593 32000020 23.60
 12 220 12.750 .687 32000021 32.58
 14 220 14.00 .750 32000022 40.51
 16 220 16.00 .843 32000023 69.77
Note: Schedule 80 pipe sold in 20 foot sections.
Maximum Back Pressure
n Oversized Wingnut with Wrench Pad for Easy Removal
n Made of High Impact ABS Material
n Will Not Rust or Corrode
n Neoprene Gasket
 Nominal Minimum Maximum Water
Item # Size Pipe Diameter Pipe Diameter Head (feet) Air (psig) Price
270-210 11
⁄2" 1.48 1.65 40 5 $3.85
270-229 2" 1.90 2.17 40 5 4.41
270-237 3" 2.80 3.10 40 5 5.93
270-245 4" 3.78 4.06 40 5 7.28
270-261 6" 5.77 6.08 30 5 20.80
270-270 8" 7.86 8.03 30 5 39.02
Maximum Back Pressure
CAUTION
See page 110 for details
Test-Tite® Pressure Relief Pneumatic Test Plugs are a patented device designed
for the purpose of testing or temporary blocking of plumbing DWV systems.
Manufactured with a factory sealed inflation fitting which features an internal
pressure relief device. The internal pressure
relief device acts as a safety valve
to reduce the chances of over inflation.
The Pressure Relief Test Plug is
designed to release excess pressure
above the suggested inflation pressure,
thus reducing the
possibility of over
inflation or blowouts.
Test-Tite® Pressure
Relief Pneumatic Test Plug
 Inflation Water Air in
Item# Description Pressure Head in Ft psig Price
83764 11
⁄2" Pressure Relief Test Plug 45 psig 30 13 $28.37
83765 2" Pressure Relief Test Plug 40 psig 30 13 30.47
83766 3" Pressure Relief Test Plug 35 psig 30 13 32.95
83767 4" Pressure Relief Test Plug 30 psig 30 13 38.21
83775 6" Pressure Relief Test Plug 30 psig 30 13 100.53
83700 Black Econo Pump w/Gauge - Hi Impact Plastic Body 37.35
83710 Red Deluxe Pump w/Gauge - Steel Body 42.35
83751 Super Pump w/0-60 Easy Read Gauge - Steel Body 68.20
Twist-Tite™ Mechanical Test Plugs
+GF+
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 119
119_119 3/30/14 3:58 PM Page 119
Pipe, Fittings & Cement
PVC Fittings (Sched ule 80) Reducing
Bushing
Male Slip x Socket
 Size in. Item # Price
 3
⁄8 x 1
⁄4* 837-052 $1.27
 1
⁄2 x 1
⁄4 837-072 1.27
 1
⁄2 x 3
⁄8* 837-073 1.27
 3
⁄4 x 1
⁄2 837-101 .47
 1 x 1
⁄2 837-130 1.30
 1 x 3
⁄4 837-131 1.30
 11
⁄4 x 1
⁄2 837-166 2.04
 11
⁄4 x 3
⁄4 837-167 2.04
 11
⁄4 x 1 837-168 2.04
 11
⁄2 x 1
⁄2 837-209 2.80
 11
⁄2 x 3
⁄4 837-210 2.80
 11
⁄2 x 1 837-211 2.80
 11
⁄2 x 11
⁄4 837-212 2.80
 2 x 1
⁄2 837-247 3.98
 2 x 3
⁄4 837-248 3.98
 2 x 1 837-249 3.98
 2 x 11
⁄4 837-250 3.98
 2 x 11
⁄2 837-251 3.98
 21
⁄2 x 11
⁄4 837-290 6.91
 21
⁄2 x 11
⁄2 837-291 6.91
 21
⁄2 x 2 837-292 6.91
 3 x 1 837-335 10.94
 3 x 11
⁄4 837-336 10.94
 3 x 11
⁄2 837-337 10.94
 3 x 2 837-338 10.94
 3 x 21
⁄2 837-339 10.94
 4 x 2 837-420 15.16
 4 x 3 837-422 15.16
 6 x 2 837-528 21.07
 6 x 3 837-530 21.07
 6 x 4 837-532 21.07
 8 x 6 837-585 51.26
Reducing Bushing
Male Slip x F.P.T.
 Size in. Item # Price
 3
⁄8 x 1
⁄4 838-052 $1.24
 1
⁄2 x 1
⁄8 838-071 1.24
 1
⁄2 x 1
⁄4 838-072 1.24
 1
⁄2 x 3
⁄8 838-073 1.24
 3
⁄4 x 1
⁄4 838-098 .82
 3
⁄4 x 3
⁄8 838-099 .82
 3
⁄4 x 1
⁄2 838-101 .82
 1 x 3
⁄8 838-129 1.31
 1 x 1
⁄2 838-130 1.31
 1 x 3
⁄4 838-131 1.31
 11
⁄4 x 1
⁄2 838-166 2.66
 11
⁄4 x 3
⁄4 838-167 2.66
 11
⁄4 x 1 838-168 2.66
 11
⁄2 x 1
⁄2 838-209 3.31
 11
⁄2 x 3
⁄4 838-210 3.31
 11
⁄2 x 1 838-211 3.31
 11
⁄2 x 11
⁄4 838-212 3.31
 2 x 1
⁄2 838-247 4.07
 2 x 3
⁄4 838-248 4.07
 2 x 1 838-249 4.07
 2 x 11
⁄4 838-250 4.07
 2 x 11
⁄2 838-251 4.07
 21
⁄2 x 1
⁄2 838-287 8.60
 21
⁄2 x 3
⁄4 838-288 8.60
 21
⁄2 x 1 838-289 8.60
 21
⁄2 x 11
⁄4 838-290 8.60
 21
⁄2 x 11
⁄2 838-291 8.60
 21
⁄2 x 2 838-292 8.60
 3 x 3
⁄4 838-334 15.93
 3 x 1 838-335 15.93
 3 x 11
⁄4 838-336 15.93
 3 x 11
⁄2 838-337 15.93
 3 x 2 838-338 15.93
 3 x 21
⁄2 838-339 15.93
 4 x 2 838-420 24.96
 4 x 21
⁄2 838-421 24.96
 4 x 3 838-422 24.96
 6 x 2 838-528 28.16
 6 x 3 838-530 28.16
 6 x 4 838-532 28.16
Reducing Bushing
M.P.T. x F.P.T.
 Size in. Item # Price
 3
⁄8 x 1
⁄4* 839--052 $2.84
 1
⁄2 x 1
⁄4 839--072 2.84
 1
⁄2 x 3
⁄8* 839--073 2.84
 3
⁄4 x 1
⁄4* 839--098 2.12
 3
⁄4 x 3
⁄8* 839--099 2.12
 3
⁄4 x 1
⁄2 839--101 1.77
 1 x 1
⁄4 839--128 3.43
 1 x 3
⁄8 839--129 2.73
 1 x 1
⁄2 839--130 2.73
 1 x 3
⁄4 839--131 2.73
 11
⁄4 x 1
⁄2 839--166 2.91
 11
⁄4 x 3
⁄4 839--167 2.91
 11
⁄4 x 1 839--168 2.91
 11
⁄2 x 1
⁄2 839--209 3.45
 11
⁄2 x 3
⁄4 839--210 3.45
 11
⁄2 x 1 839--211 3.45
 11
⁄2 x 11
⁄4 839--212 3.45
 2 x 1
⁄2 839--247 5.04
 2 x 3
⁄4 839--248 5.04
 2 x 1 839--249 5.04
 2 x 11
⁄4 839--250 5.04
 2 x 11
⁄2 839--251 5.04
 21
⁄2 x 2 839--292 6.84
 3 x 11
⁄2 839--337 9.29
 3 x 2 839--338 9.29
 3 x 21
⁄2 839--339 9.29
 4 x 2 839--420 19.14
 4 x 3 839--422 24.45
Webb 150# Full Face Flange Gaskets Available through 24" diameter.
 Size in. Item # Description Price Item # Description Price Item # Description Price
 1
⁄2 70001007 Neoprene Gasket $.85 70001007E EPDM Gasket $1.17 70001007V Viton Gasket $7.56
 3
⁄4 70001008 Neoprene Gasket .95 70001008E EPDM Gasket 1.49 70001008V Viton Gasket 8.33
 1 70001009 Neoprene Gasket 1.05 70001009E EPDM Gasket 1.95 70001009V Viton Gasket 12.01
 11
⁄4 70001010 Neoprene Gasket 1.23 70001010E EPDM Gasket 2.08 70001010V Viton Gasket 13.99
 11
⁄2 70001011 Neoprene Gasket 1.48 70001011E EPDM Gasket 2.29 70001011V Viton Gasket 16.59
 2 70001012 Neoprene Gasket 2.08 70001012E EPDM Gasket 3.23 70001012V Viton Gasket 24.05
 21
⁄2 70001013 Neoprene Gasket 2.89 70001013E EPDM Gasket 4.25 70001013V Viton Gasket 29.76
 3 70001014 Neoprene Gasket 3.13 70001014E EPDM Gasket 4.66 70001014V Viton Gasket 34.35
 4 70001016 Neoprene Gasket 4.35 70001016E EPDM Gasket 6.45 70001016V Viton Gasket 50.55
 6 70001018 Neoprene Gasket 5.72 70001018E EPDM Gasket 9.34 70001018V Viton Gasket 60.80
 8 70001019 Neoprene Gasket 7.98 70001019E EPDM Gasket 12.39 70001019V Viton Gasket 76.35
 10 70001020 Neoprene Gasket 10.82 70001020E EPDM Gasket 18.17 70001020V Viton Gasket 113.87
 12 70001021 Neoprene Gasket 16.06 70001021E EPDM Gasket 22.64 70001021V Viton Gasket 179.20
Call for other sizes.
Van Stone Flange 150 lbs. ANSI
 Size in. Item # Price
 1
⁄2 854-005 $4.28
 3
⁄4 854-007 4.59
 1 854-010 5.09
 11
⁄4 854-012 5.23
 11
⁄2 854-015 5.35
 2 854-020 7.11
 21
⁄2 854-025 11.01
 3 854-030 12.14
 4 854-040 15.39
 5 854-050 24.20
 6 854-060 24.20
 8 854-080 39.40 Threaded Flange 150 lbs. ANSI
 Size in. Item # Price
 1
⁄2 852-005 $5.12
 3
⁄4 852-007 6.01
 1 852-010 6.57
 11
⁄4 852-012 9.05
 11
⁄2 852-015 9.90
 2 852-020 10.12
 21
⁄2 852-025 23.26
 3 852-030 23.93
 4 852-040 44.95
Van Stone flanges available.
Blind Flange 150 lbs. ANSI
 Size in. Item # Price
 1
⁄2 853-005 $6.00
 3
⁄4 853-007 7.15
 1 853-010 9.76
 11
⁄4 853-012 11.99
 11
⁄2 853-015 11.99
 2 853-020 17.91
 21
⁄2 853-025 29.17
 3 853-030 35.18
 4 853-040 43.85
 6 853-060 53.29
 8 853-080 66.67
Coupling Adapter
Socket x Thread
 Size in. Item # Price
 1
⁄4 835-002 $2.40
 3
⁄8 835-003 2.40
 1
⁄2 835-005 1.32
 3
⁄4 835-007 1.96
 1 835-010 2.90
 11
⁄4 835-012 4.70
 11
⁄2 835-015 5.77
 2 835-020 10.04
 21
⁄2 835-025 15.86
 3 835-030 17.85
 4 835-040 30.67
Coupling Adapter
Male Adapter
 Size in. Item # Price
 1
⁄2 836-005 $1.66
 3
⁄4 836-007 1.83
 1 836-010 3.16
 11
⁄4 836-012 3.69
 11
⁄2 836-015 5.31
 2 836-020 7.64
 21
⁄2 836-025 8.71
 3 836-030 9.67
 4 836-040 17.20
 6 836-060 38.21
PVC Nipples 1
⁄4"-12" Standard Stock lengths through 24" (Pack quantity may apply)
 Length-Close Length-Short Length-2" Length-3" Length-4" Length-5" Length-6"
Dia. in. Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
 1
⁄8 879-005 $.74 879-015 $.86 879-020 $.97 879-030 $1.02 879-040 $1.13 879-050 $1.28 879-060 $1.47 1⁄4 880-005 .68 880-015 .74 880-020 .74 880-030 1.10 880-040 1.47 880-050 1.70 880-060 1.84 3⁄8 881-005 .68 881-015 .68 881-020 .86 881-030 1.19 881-040 1.70 881-050 1.84 881-060 1.99 1⁄2 882-005 .80 882-015 .80 882-020 .86 882-030 .97 882-040 1.10 882-050 1.26 882-060 1.32 3⁄4 883-005 .86 883-015 .86 883-020 1.27 883-030 .97 883-040 1.13 883-050 1.32 883-060 1.66
 1 884-005 1.13 884-015 1.27 884-020 1.70 884-030 1.44 884-040 1.66 884-050 1.99 884-060 2.28
 11
⁄4 885-005 1.66 885-015 1.34 885-020 1.99 885-030 1.93 885-040 2.21 885-050 2.52 885-060 2.83
 11
⁄2 886-005 1.81 886-015 1.51 886-020 2.38 886-030 2.28 886-040 2.52 886-050 3.02 886-060 3.40
 2 887-005 2.38 887-015 1.76 887-020 2.83 887-030 2.83 887-040 3.30 887-050 3.92 887-060 4.24
 21
⁄2 888-005 8.12 888-015 7.39 888-020 8.12 888-030 9.26 888-040 10.58 888-050 11.98 888-060 13.48
 3 889-005 9.70 889-015 16.12 889-020 9.78 889-030 10.58 889-040 12.37 889-050 14.13 889-060 15.84
 4 890-005 15.84 890-015 16.96 890-020 20.18 890-030 21.73 890-040 16.62 890-050 18.64 890-060 20.72
 6 892-005 17.39 892-015 17.56 892-020 21.17 892-030 24.97 892-040 26.93 892-030 27.04 892-060 32.17
Adding (1) in front of part # = Toe (thread one end), (P) at end of part # = Plain end, (M)=Machined (C) = CPVC, (PP) = Polypropylene Natural
(ie 892-030CP is 6"x3" CPVC Plain End Nipple)
PVC and CPVC are not recommended for compressed air or gas service.
CAUTION
See page 110 for details
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 120
120_120 3/30/14 4:00 PM Page 120
Pipe, Fittings & Cement
O-ring seal provides
positive, trouble-free
sealing to pipe.
Special pilot engages
with hole in pipe to
prevent saddle dislocation.
Transition Female Adapter
(Soc x Brass Fipt)
 Size Item # Price
 1
⁄2 835-005BR $17.26
 3
⁄4 835-007BR 24.83
 1 835-010BR 42.71
 11
⁄4 835-012BR 70.34
 11
⁄2 835-015BR 92.44
 2 835-020BR 114.49
PVC Transition Fittings
Transition Tee
(Soc x Soc x Brass Fipt)
 Size Item # Price
 1
⁄2 802-005BR $22.75
 3
⁄4 802-007BR 45.62
STRONG AND RELIABLE – METAL-TO-PLASTIC TRANSITIONS
SPEARS Threaded Brass Insert and Stainless Steel Collar are molded-in-place
as an integral part of each fitting for superior strength. Secondary O-ring
seal compensates for expansion and contraction variations between materials.
Low profile design accommodates streamline installation.
Note: 235 PSI maximum internal pressure rating @73°F
Stainless Steel Reinforced
Tee (Soc x Soc x SR Fipt)
 Size Item # Price
 1
⁄2 802-005SR $5.58
Transition Reducing Tee
(Soc x Soc x Brass Fipt)
 Size Item # Price
3
⁄4 x 3
⁄4 x l
⁄2 802-101BR $28.42
Stainless Steel Reinforced
Reducing Tee
(Soc x Soc x SR Fipt)
 Size Item # Price
 1
⁄2 x l
⁄4 802-072SR $5.59
 3
⁄4 x l
⁄4 802-098SR 10.35
 3
⁄4 x l
⁄2 802-101SR 10.35
Transition Reducing Female
Adapter (Soc x Brass Fipt)
 Size Item # Price
 3
⁄4 x 1
⁄2 835-101BR $25.71
Stainless Steel Reinforced
Spigot Female Adapter
(Spig x SR Fipt)
 Size Item # Price
 1
⁄2 878-005SR $4.04
 3
⁄4 878-007SR 4.75
 1 878-010SR 7.30
 11
⁄4 878-012SR 11.67
 11
⁄2 878-015SR 13.97
 2 878-020SR 23.24
 3 878-030SR 42.74
 4 878-040SR 72.61
Stainless Steel Reinforced
Union (Soc x SR Fipt)
w/Viton® O-Ring Seal
 Size Item # Price
 l
⁄2 8059-005SR $5.76
 3
⁄4 8059-007SR 6.93
 1 8059-010SR 9.01
 11
⁄4 8059-012SR 17.21
 11
⁄2 8059-015SR 21.24
 2 8059-020SR 32.44
 3 8059-030SR 79.27
 4 8059-040SR 91.01
Stainless Steel Reinforced
Reducing Female Adapter
(Soc x SR Fipt)
 Size Item # Price
 1
⁄2 x 3
⁄4 835-074SR $4.46
 3
⁄4 x 1
⁄2 835-101SR 4.46
 3
⁄4 x 1 835-102SR 6.62
 1 x 1
⁄2 835-130SR 6.62
 1 x 3
⁄4 835-131SR 6.62
Transition Union w/Brass
Threaded Insert and EPDM
O-Ring Seal (Soc x BR Fipt)
 Size Item # Price
 1 899-010BR $44.68
 11
⁄4 899-012BR 75.21
 11
⁄2 899-015BR 99.57
 2 899-020BR 132.65
Stainless Steel Reinforced
Union (Soc x SR Fipt)
w/EPDM O-Ring Seal
 Size Item # Price
 1
⁄2 8099-005SR $5.85
 3
⁄4 8099-007SR 7.87
 1 8099-010SR 10.15
 11
⁄4 8099-012SR 17.66
 11
⁄2 8099-015SR 22.90
 2 8099-020SR 36.85
 3 8099-030SR 87.77
 4 8099-040SR 100.15
Stainless Steel Reinforced
Female Adapter (Soc x SR Fipt)
 Size Item # Price
 1
⁄4 835-002SR $3.63
 3
⁄8 835-003SR 3.67
 1
⁄2 835-005SR 3.05
 3
⁄4 835-007SR 3.51
 1 835-010SR 4.96
 11
⁄4 835-012SR 9.70
 11
⁄2 835-015SR 13.83
 2 835-020SR 22.69
 21
⁄2 835-025SR 25.75
 3 835-030SR 28.76
 4 835-040SR 49.43
Transition Union w/Brass
Threaded Insert and Viton®
O-Ring Seal (Soc x BR Fipt)
 Size Item # Price
 1 859-010BR $45.6
 11
⁄4 859-012BR 78.34
 11
⁄2 859-015BR 103.66
 2 859-020BR 137.75
Transition Reducing 90° Ell
(Soc x Brass Fipt)
 Size Item # Price
 3
⁄4 x 1
⁄2 807-101BR $20.06
Transition 90° Ell
(Soc x Brass Fipt)
 Size Item # Price
 1
⁄2 807-005BR $19.99
 3
⁄4 807-007BR 35.40
n Patented design
n Superior metal-to-plastic transition
n Popular configurations
n Chemical and corrosion resistance
n Temperature capabilities
PVC Gray Hot-Tap Saddle
EPDM Saddle x Soc (Spigot)
SS316 Bolts
 Size Item # Price
2 x 3
⁄4 (1) HT2S-248 $57.97
2 x 11
⁄2 (2) HT2S-251 119.69
21
⁄2 x 3
⁄4 (1) HT2S-288 61.94
21
⁄2 x 11
⁄2 (2) HT2S-291 123.63
3 x 3
⁄4 (1) HT2S-334 70.93
3 x 11
⁄2 (2) HT2S-337 136.38
4 x 3
⁄4 (1) HT2S-416 81.92
4 x 11
⁄2 (2) HT2S-419 144.16
6 x 3
⁄4 (1) HT2S-524 91.98
6 x 11
⁄2 (2) HT2S-527 153.37
PVC Gray Clamp-On Saddle
x Soc Single Outlet with Viton®
O-ring Seal & SS Hardware
 Hole Saw
 Size Dia. Item # Price
 2 x 1 11
⁄8 866SV-249 $40.03
 2 x 11
⁄2 11
⁄2 866SV-251 40.03
21
⁄2 x 11
⁄2 13
⁄4 866SV-291 53.65
 3 x 2 21
⁄4 866SV-338 69.04
 4 x 1 11
⁄8 866SV-417 69.04
 4 x 11
⁄2 13
⁄4 866SV-419 69.04
 4 x 2 21
⁄4 866SV-420 69.04
 4 x 3 3 866SV-422 75.49
 6 x 1 11
⁄8 866SV-525 102.31
 6 x 2 21
⁄4 866SV-528 102.31
PVC Gray Clamp-On Saddle
x Soc Single Outlet with EPDM
O-ring Seal & SS Hardware
 Hole Saw
 Size Dia. Item # Price
 2 x 1 11
⁄8 866S-249 $35.85
 2 x 11
⁄2 11
⁄2 866S-251 35.85
21
⁄2 x 11
⁄2 13
⁄4 866S-291 48.21
 3 x 1 11
⁄8 866S-335 48.21
 3 x 2 21
⁄4 866S-338 48.21
 4 x 1 11
⁄8 866S-417 62.07
 4 x 11
⁄2 13
⁄4 866S-419 62.07
 4 x 2 21
⁄4 866S-420 62.07
 6 x 1 11
⁄8 866S-525 93.40
 6 x 2 21
⁄4 866S-528 93.40
PVC Gray Hot-Tap Saddle
Viton® Saddle x Soc (Spigot)
SS316 Bolts
 Size Item # Price
2 x 3
⁄4 (1) HT3S-248 $62.89
2 x 11
⁄2 (2) HT3S-251 129.84
21
⁄2 x 3
⁄4 (1) HT3S-288 67.38
21
⁄2 x 11
⁄2 (2) HT3S-291 134.23
3 x 3
⁄4 (1) HT3S-334 76.90
3 x 11
⁄2 (2) HT3S-337 148.13
4 x 3
⁄4 (1) HT3S-416 88.78
4 x 11
⁄2 (2) HT3S-419 156.47
6 x 3
⁄4 (1) HT3S-524 99.88
6 x 11
⁄2 (2) HT3S-527 166.20
Quick Spec
n Excellent metal-to-plastic system transition
n Multi-bolt design, choice of hardware options
n Excellent pressure capabilities: Maximum internal pressure rating of
235 psi through 4", 200 psi for 6", and 150 psi for 8"-12" @ 73°F.
PVC Clamp-On Saddles & Hot-Tap Saddles
Hot-Tap
Saddle
Clamp-On
Saddle
PVC CLAMP-ON SADDLES
Simple Two-Piece Design Engineered for Reliability – Spears PVC
Clamp-On Saddles allow quick, easy and reliable addition of branch lines
to existing piping system lines. These versatile saddle units can be used in
either temporary or permanent installations on all types pipe with
IPS (Iron Pipe Size) outside diameter, such as PVC CPVC, Polyethylene
Polypropylene and steel.
PVC HOT-TAP SADDLES
Hot-Tap Saddles are designed for adding branch connections to piping systems
under live (“hot”) pressure. Hot-Tap Saddle branch outlets are either 3
⁄4"
socket (with 1" Spigot O.D.) or 11
⁄2" socket (with 2" Spigot O.D.) in saddle
sizes 2" through 6" to fit IPS pipe using a built-in O-ring seal. Internal cutter
is operated using conventional ratchet and drive extension and permanently
retains coupon cut from pipe. See packaged installation instructions for details.
AVOID SPLIT
THREADS
CAUTION
See page 110 for details
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 121
121_121 3/30/14 4:01 PM Page 121
Pipe, Fittings & Cement
Spears® Solvent Cement & Primer Selection Guide Please refer to this guide in selecting the right Spears® products for your application.
The following are basic guidelines and may require adjustment according
to application or installation conditions. Certain specialty cements, such as
FlameGuard® FS-5, may have different instructions for specific application
conditions. Consult appropriate installation instructions for details.
INITIAL SET SCHEDULE: The Initial set schedule is the necessary waiting period before
handling newly assembled joints. After initial set, the joint will withstand the stress of a normal
installation. In damp or humid weather allow 50% more set time.
AVERAGE INITIAL SET SCHEDULE FOR SPEARS® PVC/CPVC SOLVENT CEMENTS
 Temperature Pipe Sizes Pipe Sizes Pipe Sizes Pipe Sizes Pipe Sizes
 Range 1
⁄2" to 11
⁄4" 11
⁄2" to 2" 21
⁄2" to 8" 10" to 15" 15"+
60°-100°F/16°-38°C 2 minutes 5 minutes 30 minutes 2 hours 4 hours
 40°-60°F/5°-16°C 5 minutes 10 minutes 2 hours 8 hours 16 hours
 0°-40°F/-18°-5°C 10 minutes 15 minutes 12 hours 24 hours 48 hours
JOINT CURE SCHEDULE: The Joint cure schedule is the necessary waiting period before
pressurizing newly assembled joints. Follow the schedule carefully. In damp or humid weather
or chemical applications, allow a minimum of 50% more cure time.
AVERAGE JOINT CURE SCHEDULE FOR SPEARS® PVC/CPVC SOLVENT CEMENTS
 Relative Humidity Cure Time Pipe Sizes
 60% or Less 1
⁄2" to 11
⁄4" 11
⁄2" to 2" 21
⁄2" to 8" 10" to 15" 15"+
Temperature range during Up to Above 160 Up to Above 160 Up to Above 160 Up to Up to
assembly and cure periods 160 psi to 370 psi 160 psi to 315 psi 160 psi to 315 psi 100 psi 100 psi
 60°-100°F/16°-38°C 15 min 6 hrs 30 min 12 hrs 11
⁄2 hrs 24 hrs 48 hrs 72 hrs
 40°-60°F/5°-16°C 20 min 12 hrs 45 min 24 hrs 4 hrs 48 hrs 96 hrs 6 days
 0°-40°F/-18°-5°C 30 min 48 hrs 1 hr 96 hrs 72 hrs 8 days 8 days 14 days
AVERAGE NUMBER OF JOINTS PER QUART OF SPEARS® CEMENT
Pipe Diameter 1
⁄2" 3
⁄4" 1" 11
⁄2" 2" 3" 4" 6" 8" 10" 12" 15" 18"
Number of Joints 300 200 125 90 60 40 30 10 5 2-3 1-2 3
⁄4 1
⁄2
Pipe Diameters
Daubers 1
⁄4" 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2 3
⁄8" Dauber * ** 1
⁄2" Dauber * * 5
⁄8" Dauber * * 3
⁄4" Dauber * *
11
⁄4" Dauber *
Rollers & Swabs Size For Pipe Dia.
3020 3" Roller 3" - 6"
6020 4" Roller 3" - 8"
7020 7" Roller 6" +
5520 4" Roller 6" +
6520 6" Roller 6" +
4020 4" Swab 6" +
5020 4" Swab 3" - 8"
4520 4" Swab 6" +
SPEARS® APPLICATOR SELECTION GUIDE
For proper solvent cement welding of pipe
and fittings, the cement applicator must be
no less than half the size of the pipe
PRODUCT SHELF LIFE: Primers / Cleaners – 3 years, PVC Solvent Cement – 3 years,
CPVC Solvent Cement – 2 years, ABS Solvent Cement – 3 years
Solvent Cemented Joints - Initial Set Schedule, Cure Schedule and Cement Usage Table
Type Body Product Color Relative Set Capacity Features
 PVC-00 Clear Fast Schedule 40 - 4"
 PVC-02 Clear Fast Schedule 40 - 4" Dries clearest, slightly thicker than PVC-0O
 PVC·05 Clear Fast All Classes & Schedules - 6", Schedule 80 - 4" Industrial Duty, Primerless Capability1
 PVC-21 Blue Fast Schedule 40 - 6", Schedule 80 - 4" Primerless Capability1
 PVC-11 Gray Medium All Classes & Schedules - 12" Industrial Duty
 PVC-17 Clear/Gray Medium All Classes & Schedules - 12", Non-pressure - 18" Industrial Duty
 PVC-19 White/Gray Slow All Classes & Schedules Requiring High Gap Filling - 30" Industrial Duty
 PVC-25 Aqua Blue Very Fast All Classes & Schedules - 6", Schedule 80 - 4" Wet-N-Dry Formulation, Primerless Capability1
 PVC-27 Clear Very Fast All Classes & Schedules - 6", Schedule 80 - 4" CoId-N-Hot Formulation -15°F to 110°F, Primerless Capability1
 PVC-50 Blue Very Fast Schedule 40 - 6", Schedule 80 - 4" HOT PVC Formulation, Primerless Capability1
 PVC-95 Clear/Blue Fast All Classes & Schedules - 6", Schedule 80 - 3" Flexible PVC for Flex-Flex, Flex-Rigid Joints
 LX·5 Clear Fast Low Extractable PVC Systems - 6" One Step2 Low Extractable, High Purity Cement
 CPVC·24 Gray/Orange Medium All Classes & Schedules Most Versatile, Chemically Resistant Cement for both
 CPVC & PVC Systems including Duct, Industrial Duty
 LW·5 Mustard Medium LabWaste™ CPVC Drainage Systems - 24" One Step2 Cement - Only LabWaste™ System
 Chemically Approved Cement
 FS-5 Red Fast CPVC Fire Sprinkler Systems - 3" One-Step2 Cement for all CPVC Fire Sprinkler
 Systems - FlameGuard® & BlazeMaster®
 CTS-5 Yellow Fast CTS CPVC Systems - 2" One-Step2 Cement for all CTS CPVC
 Systems - EverTUFF® & FIowGuard Gold®
 ABS-71 Yellow/Milky Fast All ABS Classes & Schedules - 8"
 ABS-73 Black Fast All ABS Classes & Schedules - 8"
 ABS TO PVC-94 Green Fast All Classes & Schedules - 6" (Except Schedule 80) For ABS-to-PVC Transition Joints

 Multipurpose-90 Clear Fast All Classes & Schedules - 6", Schedule 80 - 4" For PVC and CPVC pressure ABS and Styrene low-pressure systems
 Primer-70 Purple/Clear All Classes & Schedules PVC & CPVC - 30" Industrial Duty
 Primer-68 Purple/Clear All Classes & Schedules PVC & CPVC - 30"
 Cleaner-65 Clear All Classes & Schedules - All Sizes For PVC, CPVC, ABS or Styrene
Notes: 1 = Primerless Capability indicates a cement can be used without primer in certain applications if local code permits. See specific cement information for
further restrictions. 2 = One Step designates a cement specifically designed for use without primer. CTS One Step acceptability depends on local code requirements.
CTS = Copper Tube Size, ASTM 02846 Hot and Cold Water Distribution Systems Transition & Multipurpose Medium ABS Medium CPVC Specialty Cements Heavy PVC Specialty Cements Heavy Medium Regular Primers & Cleaners Extra Heavy
Can-Mate Kit Includes
Plastic Carrier Strap
and two (2) Can-Mate
150 adjustable Daubers.
Provides convenient
carrying of ½ pint,
pint or quart cans of
cement and primer.
CM-KIT2 11
⁄4" $11.87
Small-Cap Swab Fits
13
⁄4" Neck Quart Cans
(MT-651). 4" length
for pipe size 3" to 8".
5020 4"L $12.72
Large-Cap Swab Fits
27
⁄8" Neck Gallon Can
(MT-648). For pipe
size 6" & larger.
4020 4" L $16.86
Swab with Heavy
Handle For pipe size
6" & larger.
4520 4" L $17.66
Small-Cap Roller Fits
13
⁄4" Neck Quart Cans
(MT-651). Replaceable
cover. For pipe size
3" to 6".
6020 4" L $14.18
Can Roller Fits Paint
Type Quart Can (MT653).
For use with
pipe sizes 3" to 6".
3020 3" L $15.23
Large-Cap Roller Fits
27
⁄8" Neck Gallon Can
(MT-648). Roller for
pipe size 6" & larger.
7020 7" L $14.58
Roller with Heavy
Handle Replaceable
Cover. For pipe size
6" & larger.
5520 4" L $14.41
6520 6" L $17.66
Roller Replacement
Covers Fits Rollers
with Heavy Handles
#5520, #6020 &
#6520. Sold as Pack
of 2, full pack only.
5520-1 $12.85
Fits 5520 & 6020
6520-1 $14.15
Fits 6520
Cap Brushes For Pint
and Quart Cans.
KD-110 41
⁄2" L $9.11
KD-112 51
⁄2" L $9.11
Easy Pour Spout Fits 1
⁄4 Pint, 1
⁄2 Pint, Pint,
Quart, & Gallon Can
13
⁄4" Neck.
EPS-1 $5.37
Deburring Tool Cone
Type for PVC, CPVC,
ABS, PE & PB pipe
from 1
⁄2" through 2".
DEB-2 $58.79
Low VOC Solvent Cements, Primers, Cleaners & Accessories
Cap Daubers Fits 13
⁄4" Neck
Cans. Size by Dauber Diameter and Can Fitment.
DQP-50 1
⁄2" for 1
⁄4 Pint (for pipe sizes to 1") $1.13
DQP-75 3
⁄4" for 1
⁄4 Pint (for pipe sizes to 11
⁄2") $1.13
DHP-38 3
⁄8" for 1
⁄2 Pint (for pipe sizes to 3
⁄4") $1.13
DHP-50 1
⁄2" for 1
⁄2 Pint (for pipe sizes to 1") $1.13
DHP-75 3
⁄4" for 1
⁄2 Pint (for pipe sizes to 11
⁄2") $1.13
DP-62 5
⁄8" CTS Pint (for pipe sizes to 11
⁄4") $1.13
DP-75 3
⁄4" for Pint (for pipe sizes to 11
⁄2") $1.13
DP-125 11
⁄4" for Pint (for pipe sizes 11
⁄2" to 3") $1.13
DQ-62 5
⁄8" CTS Quart (for pipe sizes to 11
⁄2") $1.13
DQ-75 3
⁄4" for Quart (for pipe sizes to 11
⁄2") $1.13
DQ-125 11
⁄4" for Quart (for pipe sizes 11
⁄2" to 3") $1.13
APPLICATORS & ACCESSORIES
Can-Mate Daubers
Adjustable Plastic
Applicator with
Telescoping Stem for
use with Standard 1
⁄2
Pint, Pint and Quart
Cans.
CM-50 1
⁄2" $4.53
CM-75 3
⁄4" $4.53
CM-150 11
⁄4" $4.53 1
⁄2" Diameter for pipe
sizes up to 1"
3
⁄4 " Diameter for pipe
size to 11
⁄2"
11
⁄4" Diameter for pipe
size 11
⁄2" to 3"
Standard Empty Cans
13
⁄4" Neck
MT-656 1
⁄4 Pint $2.24
MT-655 1
⁄2 Pint $3.37
MT-654 Pint $7.03
MT-651 Quart $7.94
MT-647 Gallon $18.67
CAUTION
See page 110 for details
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 122
122_122 3/30/14 4:02 PM Page 122
Pipe, Fittings & Cement
PVC-05 CLEAR: Medium
bodied, fast setting, PVC
cement for all classes
and schedules with interference
fit through 6"
diameter and Schedule
80 through 4" diameter
in industrial, plumbing, DWV, irrigation, electrical
conduit, pool & spa and PVC foam core
pipe. Can be used without primer on nonpressure
systems if local code permits. Listings:
ASTM D2564, NSF®-PW, DWV, SW, U.P. Code.
PVC-05 Clear Medium Body PVC Cement
 Item # Size Price
 PVC05C-005 1
⁄4 Pint $5.08
 PVC05C-010 1
⁄2 Pint 6.91
 PVC05C-020 Pint 10.37
 PVC05C-030 Quart 16.49
 PVC05C-040 Gallon 56.20
PVC-25 AQUA BLUE WETN-DRY:
Medium bodied,
very fast setting PVC
cement for all classes
and schedules with interference
fit through 6"
diameter and Schedule
80 through 4" diameter. Formulated for wet
conditions and quick pressurization.
Designed for irrigation, plumbing, and pool
& spa applications. Can be used without
primer on non-pressure systems if local code
permits. Listings: ASTM D2564, NSF®-PW,
DWV, SW, U.P. Code.
PVC-25 Aqua Blue Wet-N-Dry Medium Body PVC Cement
 Item # Size Price
 PVC25B-005 1
⁄4 Pint $5.36
 PVC25B-010 1
⁄2 Pint 8.09
 PVC25B-020 Pint 12.07
 PVC25B-030 Quart 20.21
 PVC25B-040 Gallon 69.70
PVC-27 CLEAR COLD-NHOT:
Medium bodied,
very fast setting, PVC
cement for all classes
and schedules with interference
fit through 6"
diameter, Schedule 80
through 4" diameter. Formulated for -15°F
to 110°F (-26°C to 43°C) weather conditions.
Designed for industrial, plumbing, irrigation,
pool & spa, electrical conduit and
PVC foam core pipe. Can be used without
primer on non-pressure systems if local code
permits. Listings: ASTM D2564, NSF®-PW,
DWV, SW, U.P. Code.
PVC-27 Clear Cold-N-Hot Medium Body PVC Cement
 Item # Size Price
 PVC27C-020 Pint $12.60
 PVC27C-030 Quart 21.20
 PVC27C-040 Gallon 73.57
PVC-11 GRAY: Heavy
bodied, medium setting
PVC cement for all classes
and schedules with interference
fit through 12"
diameter. Medium set
allows more working
time in warm weather and has good gap filling
properties. Listings: ASTM D2564, NSF®-
PW, DWV, SW, U.P. Code, CSA B137.3, B181.2.
PVC-11 Gray Heavy Body PVC Cement
 Item # Size Price
 PVC11G-010 1
⁄2 Pint $10.66
 PVC11G-020 Pint 12.88
 PVC11G-030 Quart 21.66
 PVC11G-040 Gallon 73.25
PVC-17 CLEAR/GRAY:
Heavy bodied, medium
setting PVC cement for
all classes and schedules
with interference fit
through 12" diameter
(non-pressure applications
only up to 18"). Medium set allows more
working time in warm weather and has good
gap filling properties. Designed for plumbing,
industrial, pool, irrigation and electrical
piping systems. Listings: ASTM D2564, NSF®-
PW, DWV, SW, U.P.Code (Clear/Gray); CSA
B137.3, B181.2 (Gray only).
PVC-17 Heavy Body PVC Cement
 Gray Clear Size Price
PVC17G-010 PVC17C-010 1
⁄2 Pint $8.24
PVC17G-020 PVC17C-020 Pint 12.72
PVC17G-030 PVC17C-030 Quart 21.47
PVC17G-040 PVC17C-040 Gallon 72.53
PVC-19 WHITE/GRAY:
Extra heavy bodied, slow
setting PVC cement for
all classes and schedules
with interference fit
through 30" diameter.
Designed for large size
piping systems requiring high gap filling
properties such as industrial piping and fitting
fabrication in pressure and non-pressure
applications. Listings: ASTM D2564, NSF®-PW,
DWV, SW, U.P. Code, CSA (Gray Only)
B137.3, B181.2.
PVC-19 Extra-Heavy Body PVC Cement
 White Gray Size Price
PVC19W-020 PVC19G-020 Pint $19.46
PVC19W-030 PVC19G-030 Quart 25.93
PVC19W-040 PVC19G-040 Gallon 85.51
PVC19W-050 PVC19G-050 5 Gallon 369.67
LW-5 MUSTARD: OneStep
(no primer required)
CPVC cement specifically
formulated and
approved for use with
Spears® LabWaste™
CPVC Corrosive Waste
Drainage System Products with interference
fit through 24". See Publication LW-4,
Technical Information, for application details.
Listings: ASTM F493, NSF®-CW, PW, DWV, SW,
U.P. Code, ICC-ES PMG.
The Only Chemically Resistant Cement
Approved for Spears® LabWaste™
LW-5 LabWaste™ One-Step CPVC Cement
 Item # Size Price
 LW5-020 Pint $37.91
 LW5-030 Quart 51.29
 LW5-040 Gallon 205.68
 LW5-050 5 Gallon 949.35
Primers are used for the surface preparation
of plastic pipe and fittings, which is
necessary for the proper solvent welding of
these materials. Cleaner aids in pre-cleaning
to remove oil and grease.
All Spears® Primers and Cleaners are low VOC
products, which are environmentally friendly
with lower emissions and reduced odor, surpassing
the most stringent regulations and
PRIMER-70 Industrial Strength Primer
 Clear Purple Size Price
PRIM70C-005 PRIM70P-005 1
⁄4 Pint $5.36
PRIM70C-010 PRIM70P-010 1
⁄2 Pint 6.94
PRIM70C-020 PRIM70P-020 Pint 11.89
PRIM70C-030 PRIM70P-030 Quart 19.25
PRIM70C-040 PRIM70P-040 Gallon 63.26
Low VOC Solvent Cements, Primers, Cleaners & Accessories
LOW VOC PVC CEMENTS
LOW VOC CPVC CEMENTS
LOW VOC SOLVENT PRIMERS & CLEANERS
comply with SCAQMD Rule 1168/316A.
Spears® Primers are certified for use with
potable water by NSF® International.
3-Year Shelf Life.
Essential solvent cements developed for contractors’ essential needs
in joining PVC, CPVC and ABS pipe and fittings. User Friendly with
reduced fumes and odor for well-being of pipe installers.
NSF® Certified & Listed for use in piping applications such as potable
water, turf, irrigation, pool & spa, industrial, plumbing, DWV, and/or sewer, plus special
applications including fire protection, chemical waste, and ultra-pure water.
Meets ASTM Standards for solvent cements and primers used for plastic pipe installation.
Environmentally friendly. LEED® Compliant (Leadership in Energy and Environmental
Design). Credit can be gained through the use of Spears® Low VOC products. This program,
developed by the US Green Building Council, uses SCAQMD Rule 1168 as a benchmark to
qualify one credit toward LEED® certification for green building.
Heavy bodied cements are specifically formulated
for CPVC plastic pipe and fittings including
a variety of One-Step (no primer required)
CPVC specialty cements. These products are
ideal for use in hot/cold water plumbing systems,
water treatment and chemical plants, as
well as industrial piping systems.
Low VOC emissions comply with SCAQMD
Rule 1168/316A
2-Year Shelf Life
CPVC-24 GRAY/ORANGE:
Heavy bodied, medium
setting CPVC cement for
all classes and schedules
with interference fit
through 24" diameter.
High-strength, chemicalresistant
solvent cement for use with CPVC
piping systems carrying acids, bases, salts,
and sodium hypochlorite. Ideal for use in
waste water plants. Recommended for use
on PVC industrial piping systems for chemical
applications; best choice for both PVC and
CPVC fume & air duct systems. Listings: ASTM
F493, NSF®-PW, DWV, SW, U.P. Code.
The Most Chemically Resistant Cement
Available for Both PVC & CPVC Applications
CPVC-24 Heavy Body CPVC Cement
 Gray Orange Size Price
CPVC24G-005 CPVC24O-005 1
⁄4 Pint $5.98
CPVC24G-010 CPVC24O-010 1
⁄2 Pint 8.92
CPVC24G-020 CPVC24O-020 Pint 14.42
CPVC24G-030 CPVC24O-030 Quart 25.47
CPVC24G-040 CPVC24O-040 Gallon 87.95
PRIMER-70 INDUSTRIAL
GRADE PURPLE/CLEAR:
Premium, industrial
strength primer essential
for proper softening and
preparation of PVC and
CPVC pipe and fitting
surfaces. Specially recommended for use on
Schedule 80 (150 psi and higher) and large
size pipe. Excellent for cold weather applications.
Listings: ASTM F656, NSF®-PW, DWV,
SW, U.P. Code (Purple Only).
CAUTION
See page 110 for details
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 123
123_123 3/30/14 4:03 PM Page 123
Pipe, Fittings & Cement
FUSEAL PPFR & PPNFR Pipe
FUSEAL Mechanical Joint Fittings PPFR
Fuseal PP piping systems have excellent chemical resistance and physical properties
which make the system ideal for handling corrosive waste mixtures of where mixtures
of acids, bases and solvents present in laboratory, industrial or food and beverage
processing DWV applications.
TECHNICAL DATA:
Size Range:
n 1½" - 18" Schedule 40,
1½" - 12" Schedule 80
Pressure Rating:
n -30 (15 PSI) max. head pressure
DWV applications
Fuseal® Corrosive Waste Piping System
Size (in) Item # Min Wall Price/ft
 11
⁄2 37A013015 0.145 $4.99
 2 37A013020 0.154 6.56
 3 37A013030 0.216 13.12
 4 37A013040 0.237 16.87
Size (in) Item # Min Wall Price/ft
 11
⁄2 37B023015 0.145 $3.75
 2 37B023020 0.154 5.01
 3 37B023030 0.216 10.32
 4 37B023040 0.237 13.12
Schedule 40 PPFR
Flame Retardant
Sold in 10' Lengths
Schedule 40 PPNFR
Non-Flame Retardant
Sold in 20' Lengths
Coupling (MJ x MJ)
Size (in) Item # D (in) N (in) Price
 11
⁄2 539001 2.75 0.13 $18.12
 2 539002 3.25 0.13 20.93
 3 539003 5.25 0.25 41.85
 4 539004 6.63 0.25 46.23
1
⁄4 Bend (91.2°) - Short Sweep
(MJ x MJ)
Size (in) Item # D (in) N (in) Price
 11
⁄2 538251 4 1.75 $20.93
 2 538252 2 2.31 26.55
 3 538253 1 3.07 71.21
 4 538254 1 3.88 84.95
1
⁄4 Bend (91.2°) - Street
(MJ x SPG)
Size (in) Item # D (in) N (in) Price
 11
⁄2 538451 4 1.75 $19.68
 2 538452 2 2.31 23.74
 3 538453 1 3.07 62.47
 4 538454 1 3.88 78.72
1
⁄8 Bend (45°) - Street (MJ x SPG)
Size (in) Item # J (in) K (in) Price
 11
⁄2 538401 1.13 2.45 $19.68
 2 538402 1.41 2.84 23.74
 3 538403 1.38 3.23 62.47
 4 538404 1.50 3.75 78.72
45° Wye (MJ x MJ x MJ)
Size (in) Item # GJ (in) GN (in) N (in) Price
11
⁄2 538301 3.25 1.13 4.00 $26.86
2 538302 4.13 1.38 5.00 39.36
3 538303 5.75 1.63 7.38 115.57
4 538304 7.38 1.88 9.25 132.44
45° Wye - Reducing
(MJ x MJ x MJ)
Size (in) Item # GJ (in) GN (in) N (in) Price
2x2x11
⁄2 538325 5.75 1.38 5.00 $47.47
3x3x11
⁄2 538324 8.50 1.63 7.38 101.86
3x3x2 538326 8.50 1.63 7.38 115.57
4x4x2 538328 10.30 1.88 9.25 132.44
4x4x3 538327 10.06 1.88 9.25 139.94
Combo Wye & 1
⁄8 Bend (90°)
(MJ x MJ x MJ)
Size (in) Item # GJ (in) GN (in) N (in) Price
11
⁄2 539301 5.13 5.13 4.00 $47.47
2 539302 6.31 6.25 5.00 62.47
3 539303 7.90 8.15 7.38 124.95
4 539304 9.54 9.92 9.25 156.18
Combo Wye & 1
⁄8 Bend (90°) -
Reducing (MJxMJxMJ)
Size (in) Item # GJ (in) GN (in) N (in) Price
2x2x11
⁄2 539320 7.94 6.31 5.00 $62.47
3x3x11
⁄2 539326 8.86 9.35 7.38 102.45
3x3x2 539327 9.25 9.45 7.38 116.20
4x4x2 539337 12.04 9.77 9.25 132.44
4x4x3 539338 11.98 9.92 9.25 138.69
Sanitary Tee (91.2°)
(MJ x MJ x MJ)
Size (in) Item # GJ (in) GN (in) N (in) Price
11
⁄2 538151 1.75 1.75 3.00 $32.48
2 538152 2.31 2.31 3.69 47.47
3 538153 3.06 3.31 4.88 124.95
4 538154 3.88 3.97 6.13 194.74
Sanitary Tee (91.2°) -
Reducing (MJ x MJ x MJ)
Size (in) Item # GJ (in) GN (in) N (in) Price
2x2x11
⁄2 538126 3.92 2.38 3.69 $41.23
3x3x11
⁄2 538131 5.54 3.42 4.88 102.45
3x3x2 538130 5.54 3.42 4.88 108.69
4x4x2 538134 6.43 4.11 6.13 124.95
4x4x3 538136 6.32 4.10 6.13 138.68
1
⁄8 Bend (45°) (MJ x MJ)
Size (in) Item # J (in) Price
 11
⁄2 538501 1.09 $20.93
 2 538502 1.41 26.55
 3 538503 1.38 71.21
 4 538504 1.50 84.95
Male Adapter (MJ x MPT)
Size (in) Item # HL (in) Price
 11
⁄2 538871 1.19 $14.68
 2 538872 1.22 18.12
 3 538873 1.90 54.98
 4 538874 2.00 78.72
Female Adapter (MJ x FPT)
Size (in) Item # HL (in) Price
 11
⁄2 538891 1.19 $14.68
 2 538892 1.22 18.12
 3 538893 2.93 54.98
 4 538894 3.00 78.72
Reducer Bushing (Spg x MJ)
Size (in) Item # HL (in) Price
 2 x 11
⁄2 538752 1.61 $16.24
 3 x 11
⁄2 538762 2.48 39.98
 3 x 2 538754 2.48 47.47
 4 x 2 538758 2.55 63.73
 4 x 3 538756 2.44 78.72
Fuseal Adapter (MJ x Spg)
Size (in) Item # N (in) Price
 11
⁄2 539651 1.49 $18.74
 2 539652 1.17 21.24
 3 539653 1.19 33.74
 4 539654 1.20 47.47
U Bend (MJ x MJ)
Size (in) Item # G (in) L3 (in) Price
 11
⁄2 539211 1.68 3.50 $32.48
MJ Kit
includes Nut, Seal Ring and Grab Ring
 Size (in) Item # Price
 11
⁄2 536051 $15.00
 2 536052 15.00
 3 536053 24.99
 4 536054 24.99
P-Trap (MJ x MJ) – 11
⁄2" & 2" U-Bend Joint is a Union Nut Connection, 3" & 4" U-Bend Joint is Factory Fused
Size (in) Item # GJ (in) GN (in) L1 (in) L2 (in) L3 (in) Price
11
⁄2 539211E 5.25 1.68 3.04 4.79 3.50 $47.47
2 539212E 8.40 4.04 2.77 4.96 5.06 69.97
3 539213E 10.06 3.94 4.32 7.56 6.75 116.20
4 539214E 12.38 5.06 5.75 10.00 8.50 218.65
Spanner Wrench
 Size (in) Item # Price
 11
⁄2 & 2 538100 $40.60
 3 & 4 538101 54.36
Cleanout Tee with Plug
(MJ x MJ x FT)
Size (in) Item # HL (in) N (in) Price
 11
⁄2 536114A 1.82 5.10 $72.47
 2 536115A 2.13 5.08 87.46
 3 536116A 2.63 6.13 171.17
 4 536117A 3.38 7.40 212.40
Operating Temperature:
n 32°F-212°F (0°C-100°C)
Joining Technology:
n Electrofusion, Mechanical
Joint, Butt Fusion
Standard Ratings:
n ASTM F1412, ASTM
D3311, ASTM D4101,
ASTM F1290, ASTM D635
n NSF cw, CSA
Materials:
n Polypropylene NonFlame
Retardant Pipe
(PPNFR)
n Polypropylene Flame
Retardant (PPFR)
Fields of Application:
n Corrosive Waste
Drainage
n Life Sciences
n Chemical Process
Industry
n Shipbuilding/Marine
n Food and Beverage
NEW
+GF+
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 124
124_124 3/30/14 4:05 PM Page 124
Pipe Hangers, Strut & Accessories
Aickinstrut Fiberglass Strut is the most widely used and
accepted non-metallic strut support system in the world
because it is the most complete quality line of non-metallic accessories, fasteners, hangers,
pipe clamps and channels available. Aickinstrut is a versatile, high-strength product that has
been successfully used in thousands of applications worldwide. Some of those applications
include: wastewater treatment, refineries, chemical plants, marinas, pulp and
paper, desalination facilities, theme parks, aquariums and underground vaults.
The ability of each material to handle high and low temperatures, chemical exposure and static
loads is covered in the full design manual. By using these criteria, you will be able to select
the optimal Aickinstrut channel, fittings and accessories for your particular application.
Please consult a salesperson for full details.
AICKINSTRUT CHANNEL FRAMING Types P (Gray), V (Beige) and E (Gray)
Fiberfast™ Glass Reinforced
Polyurethane Nuts and Bolts
Universal Channel Inserts/Uniserts
For Use with Standard Steel Channels
Aickinstrut Rigid Pipe Clamps
 Item # Description Price Ea.
200-4100 Clamp (1
⁄2" to 11
⁄2" O.D.)
 + Insert Assem. (PU) $3.63
200-4101 Universal Insert (PU) 1.00 Polyurethane 90 Bracket
 Item # Description Price Ea.
50PU26-2636 15
⁄8" x 4" Grooved $9.47
50PU26-2936 15
⁄8" x 4" Splined 9.47
 Item # Size Price Ea.
PCR-050 1
⁄2" $5.47
PCR-075 3
⁄4" 6.08
PCR-100 1" 6.34
PCR-125 11
⁄4" 6.65
PCR-150 11
⁄2" 7.08
PCR-200 2" 7.32
PCR-300 3" 8.45
PCR-400 4" 9.19
PCR-600 6" 14.29
Non-Metallic U-Bolts
 Item # Size Price Ea.
 UB-050 1
⁄2" $5.60
 UB-075 3
⁄4" 6.08
 UB-100 1" 6.53
 UB-125 11
⁄4" 6.77
 UB-150 11
⁄2" 6.95
 UB-200 2" 9.06
 UB-250 21
⁄2" 10.10
 UB-300 3" 10.81
 UB-350 31
⁄2" 11.11
 UB-400 4" 11.81
U-Bolts include two hex head nuts.
 Item # Description Price Ea.
 200-3100 1
⁄2" to 11
⁄2" $4.20
 200-3110 11
⁄2" to 21
⁄2" 5.18
 200-3120 21
⁄4" to 31
⁄4" 5.93
 200-3130 3" to 4" 7.45
 200-3140 4" to 61
⁄2" 9.09
Also available in PVDF (Kynar) material.
Please consult sale office.
 Item # Size Price Ea.
1
⁄4" Hex Head Bolts
250PU-075 1
⁄4" x 3
⁄4" $.47
250PU-100 1
⁄4" x 1" .63
250PU-150 1
⁄4" x 11
⁄2" .63 3
⁄8" Hex Head Bolts
375PU-125 3
⁄8" x 11
⁄4" 1.56
375PU-150 3
⁄8" x 11
⁄2" 1.72
375PU-200 3
⁄8" x 2" 1.86
375PU-250 3
⁄8" x 21
⁄2" 2.18
375PU-300 3
⁄8" x 3" 2.35
375PU-350 3
⁄8" x 31
⁄2" 2.51 1
⁄2" Hex Head Bolts
500PU-125 1
⁄2" x 11
⁄4" 1.72
500PU-150 1
⁄2" x 11
⁄2" 1.72
500PU-200 1
⁄2" x 2" 2.34
500PU-250 1
⁄2" x 21
⁄2" 2.62
500PU-300 1
⁄2" x 3" 2.78
500PU-350 1
⁄2" x 31
⁄2" 3.13 5
⁄8" Hex Head Bolts
625PU-125 5
⁄8" x 11
⁄4" 2.65
625PU-150 5
⁄8" x 11
⁄2" 2.80
625PU-200 5
⁄8" x 2" 2.98
625PU-250 5
⁄8" x 21
⁄2" 3.13
625PU-300 5
⁄8" x 3" 3.27
625PU-350 5
⁄8" x 31
⁄2" 3.58
 Item # Size Price Ea.
 375PU-FN-000 3
⁄8" $1.74
 500PU-FN-000 1
⁄2" 1.91
 625PU-FN-000 5
⁄8" 2.34
 750PU-FN-000 3
⁄4" 2.62
 1000PU-FN-000 1" 3.65
Aickinstrut Channel Framing and Accessories
Material Code
E – PVC P – Polyester V – Vinylester PU – Polyurethane PP – Polypropylene N – Nylon
Polyester
Item # Desc. Price/ft.
20P-2000 Single $6.45
20P-2100 Double 12.88
20P-2200 Slotted 9.81
20P-2300 Conc. Ins. 16.98
Vinylester
Item # Desc. Price/ft.
20V-2000 Single $8.08
20V-2100 Double 15.27
20V-2200 Slotted 13.00
20V-2300 Conc. Ins. 17.82
Rigid PVC
Item # Desc. Price/ft.
20E-2000 Single $6.21
20E-2200 Slotted 7.77
20E-2300 Conc. Ins. 11.48
Flat PVC Washers
 Item # Size Price Ea.
 250E-999 1
⁄4" $.47
 375E-999 3
⁄8" .60
 500E-999 1
⁄2" .73
 625E-999 5
⁄8" 1.31
 750E-999 3
⁄4" 1.60
1000E-999 1" 1.74
Fiberglass Reinforced Threaded Rod
 Item # Size 4 ft./Ea. 8 ft./Ea.
200-3827 3
⁄8" $21.78 $42.46
200-3828 1
⁄2" 25.25 50.49
200-3829 5
⁄8" 33.20 66.47
200-3830 3
⁄4" 16.65 93.28
200-3831 1" 53.85 107.49
To order 8' lengths, add suffix(-96) to
part number. Example: 200-3827-96
 Item # Size Price Ea.
200-4226 3
⁄8" $2.73
200-4217 1
⁄2" 2.73
200-4341 5
⁄8" 2.73
200-4342 3
⁄4" 2.73
Glass Reinforced Polyurethane
Channel Nuts
Many more configurations available. Consult sales office.
Adjustable Pipe Clamps
Saddle Clips
Hex Nut
Hex Flange Nut
 Item # Nominal Dia. Price Ea.
 CVHPU-100 1
⁄2"-1" $26.63
 CVHPU-150 11
⁄4" - 11
⁄2" 28.43
 CVHPU-200 11
⁄2" - 2" 33.58
 CVHPU-400 21
⁄2" - 4" 52.73
 VVHPU-600 41
⁄2 - 6" 68.87
Molded Clevis Hangers
 Item # Size Price Ea.
 200-4227 3
⁄8" $7.18
 200-4219 1
⁄2" 7.18
 200-4343 5
⁄8" 7.18
Stop-Lock Assemblies
Channel Fittings – Over 30 Variations
Glass Reinforced
Polyurethane Post Bases
 Item # Size Price Ea.
Polyurethane SINGLE
20PU-5853 15
⁄8" $32.69
20PU-5854 11
⁄2" 32.69
20PU-5855 1" 32.69
Polypropylene
20PP-5853 15
⁄8" 17.67
20PP-5854 11
⁄2" 17.67
20PP-5855 1" 17.67
Polyurethane DOUBLE
20PU-5903 15
⁄8" 38.37
20PU-5904 11
⁄2" 38.37
20PU-5905 1" 38.37
Polypropylene
20PP-5903 15
⁄8" 22.85
20PP-5904 11
⁄2" 22.85
20PP-5905 1" 22.85
 Item # Size Price Ea.
250PU-000 1
⁄4" $.39
375PU-000 3
⁄8" .85
500PU-000 1
⁄2" 1.06
625PU-000 5
⁄8" 1.56
 Item # Size Price Ea.
Standard Duty
250PU-CN 1
⁄4" $2.18
312PU-CN 5
⁄16" 2.18
375PU-CN 3
⁄8" 2.18
500PU-CN 1
⁄2" 2.18
625PU-CN 5
⁄8" 2.18
10PU-CNM 10mm 2.18
10PU-CNM 12mm 2.18
Heavy Duty
375PU-CNHD 3
⁄8" $3.91
500PU-CNHD 1
⁄2" 3.91
625PU-CNHD 5
⁄8" 3.91
750PU-CNHD 3
⁄4" 3.91
10PU-CNMHD 10mm 3.91
12PU-CNMHD 12mm 3.91
16PU-CNMHD 16mm 3.91
20PU-CNMHD 20mm 3.91
IN STOCK
2000 Series
15
⁄8" Heavy Duty
1500 Series
11
⁄2" Medium Duty
1000 Series
11
⁄8" Light Duty
SST Series
15
⁄8" Heavy Duty
Also
Available
Also
Available
Also
Available
Fittings are cut from 3
⁄8" flat stock or molded. Fittings are made either of polyester or vinyl ester
material. 13⁄32 holes to accomadate 3
⁄8" bolt. Call with your requirements. Stock in 10' lengths, 20' available.
NEW
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 125
125_125 3/30/14 4:06 PM Page 125
Pipe Hangers, Strut & Accessories
n Full range of installation systems available
n Self-locking
n Patented design
n Largest pipe range available ¼" - 2"
n UV-stabilized engineered polymer
n Corrosion-free
n ASTM E-84 - plenum rated
085 4 332 -
Universal Rail
Adaptor
For Strut Rail
(e.g. BIS RapidStrut®)
085 4 348 -
RapidStrut®
Hammerfix M8
For Strut Rail
(e.g. BIS RapidStrut®)
SQ 085 4 001 -
3
⁄8" threaded rod
adapter with nut
Self-Locking Corrosion-Free Pipe Support System
Item # Type D (mm) IP (") CT (") Price Ea.
085 4 010 SQ-10 100/Bx 10 - 12 - ¼ $.61
085 4 012 SQ-12 100/Bx 12 - 14 ¼ 3
⁄8 .57
085 4 015 SQ-15 100/Bx 14 - 16 - ½ .59
085 4 018 SQ-17 100/Bx 16 - 20 3
⁄8 5
⁄8 .75
085 4 022 SQ-20 50/Bx 20 - 23 ½ ¾ .86
085 4 028 SQ-25 50/Bx 24 - 28 ¾ - 1.16
085 4 031 SQ-28 50/Bx 28 - 32 - 1 1.21
Item # Type D (mm) IP (") CT (") Price Ea.
085 4 035 SQ-32 25/Bx 32 - 35 1 1¼ $1.54
085 4 038 SQ-36 25/Bx 35 - 40 - - 1.89
085 4 042 SQ-40 25/Bx 40 - 44 1¼ 1½ 2.23
085 4 050 SQ-47 25/Bx 44 - 50 - - 2.39
085 4 054 SQ-51 15/Bx 48 - 55 1½ 2 2.86
085 4 063 SQ-59 15/Bx 59 - 65 2 - 3.63
 Item # Description Price Ea.
A 085 4 000 Duo Bracket 2", 100/Box $1.87
B 085 4 359 Threaded Rod Adaptor 3
⁄8", 25/Box .68
C 085 4 302 Sprint Screw Ø ¼" x 1.8", 100/Box .15
D 085 4 316 Fixing Rail 6", 50/Box 1.70
 085 4 325 Fixing Rail 3'3", 25/Box 6.97
E 085 4 313 Adaptor for sQ Fixing Rail, 20/Box .93
F 085 4 314 Rail Plug 1.2", 50/Box .15
G 085 4 332 Universal Rail Adaptor, 50/Box 1.04
H 610 1 063 Push Plug ¼", 50/Box .31
I SQ 085 4 006 Fixing Nut ¼", 100/Box .43
 085 4 308 Fixing Nut M8, 100/Box .43
J SQ 085 4 337 RapidRail® Hammerfix ¼", 50/Box 2.63
 085 4 348 RapidStrut® Hammerfix M8*, 25/Box 2.06
K 085 4 510 Distance Block 3
⁄8", 25/Box .86
L SQ 085 4 001 3
⁄8" threaded rod adapter with nut, 4.91
 303 Stainless steel, 50/Box
* For heavy duty mounting to Strut
BIS starQuick® Clamps
Maximum
installation
flexibility
BISMAT® 5000 is a rubber lined pipe clamp
uniquely designed for plastic pipe applications.
This two-part clamp has a hinged side
and the BISMAT® patented single screw locking system. The specially designed, green,
UV-resistant, EPDM rubber lining is smooth to allow for the expansion of plastic pipes. The
patented removable spacer washers on the screw are designed to make this clamp suitable
for sliding or fixed points. Noise insulating and ASTM E-84 plenum rated. The BISMAT® 5000
is zinc plated for corrosion resistance.
 Item # Metric IPS CTS G B H h Price (mm) (”) (”) (”)
 CR 348 9 018 15 - 18 3
⁄8 ½ 3
⁄8 1.9 1.4 0.87 $2.17
 CR 348 9 023 20 - 23 ½ ¾ 3
⁄8 2.2 1.7 0.94 2.18
 CR 348 9 028 25 - 28 ¾ 1 3
⁄8 2.4 1.9 1.0 2.34
 CR 348 9 035 31 - 35 1 1¼ 3
⁄8 2.6 2.2 1.2 2.60
 CR 348 9 043 40 - 43 1¼ 1½ 3
⁄8 3.0 2.6 1.3 3.21
 CR 348 9 053 48 - 53 1½ – 3
⁄8 3.3 3.0 1.5 3.37
 CR 348 9 056 54 - 56 – 2 3
⁄8 3.5 3.0 1.6 4.34
 CR 348 9 058 60 - 65 2 – 3
⁄8 4.3 3.4 1.7 6.75
 CR 348 9 075 70 - 76 2½ – 3
⁄8 4.9 4.1 2.2 7.23
 CR 348 9 090 86 - 91 3 – 3
⁄8 5.4 4.6 2.4 8.13
 CR 348 9 110 110 - 114 *4 – 3
⁄8 6.3 5.8 2.9 10.12
n BISMAT® quick locking system
n Green rubber lining formulated without plasticizers
n Rubber lining is designed specifically for plastic
pipes
n Inner lining is smooth to allow for expansion and
contraction
n Patented spacer washers allow for sliding or
fixed hanging positions
n Plenum rated - tested to ASTM E-84
n Complies with MSS SP-58 and SP-69 standards
Hinge clamp around pipe
Press to close clamp
Fix screw to lock clamp
Single screw pipe clamp for plastic pipes
BISMAT® 5000
NEW
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 126
126_126 3/30/14 4:06 PM Page 126
PVC Pac-Flex
Flexible Conduit
Spiralite 175 Nominal Size Inch 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
Approx. O.D. inch 1.02 1.29 1.56 1.84 2.39
Recommended W.P. @ 68°F psi 100 100 90 90 70
Vacuum Rating @ 68°F in/HG 28 28 28 28 28
Recom. Min. Bend Radius @ 68°F* inch 2 3 4 5 6
Approx. B.P. @ 68°F psi 300 300 270 270 210
Item # 175-00-0075 175-00-0100 175-00-0125 175-00-0150 175-00-0200
Price/ft. $1.59 $1.96 $2.76 $2.90 $4.59
Sold by the 100 ft. roll.
Spiralite 850 Nominal Size Inch 1
⁄2" 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
Approx. O.D. inch .85 1.06 1.33 1.67 1.91 2.38
Recom. Min. Bend Radius @ 68°F* inch 2 2 3 4 5 6
Item # 850-00-0050 850-00-0075 850-00-0100 850-00-0125 850-00-0150 850-00-0200
Price/ft. $1.33 $1.69 $1.77 $2.41 $2.61 $3.52
Sold by the 100 ft. roll. *Bend Radius for continuous service.
PVC Standard Duty All Clear Food
Handling Suction Hose
See-Through Hose See-Through Hose
175
850
Quick Spec
n STANDARD LENGTH: 100' roll
n COLOR: Clear wall and clear helix.
n TEMP. RANGE: -10°F to +130°F
n APPLICATION: Milk handling, food processing,
conditions requiring see-through flow.
n HIGH QUALITY: High quality materials in
compliance with the criteria of 3A
Standard No. 20-00 and FDA. Acceptable
to USDA for use in federally inspected
meat and poultry plants.
Quick Spec
n STANDARD LENGTH: 100' roll
n COLOR: Light Gray
n TEMP. RANGE: -10°F to +130°F
n APPLICATION: Flexible conduit manufactured
to Sch. 40 sizing spec.
n HIGH QUALITY: Meets or exceeds Western
Underground Committee’s 3.1
Specifications, 3.2 Heat Distortion, 3.3
Impact Resistance, 3.4 Conduit Stiffness
Note: Industrial use only. Not for plumbing.
Will glue into
standard PVC fittings.
Will glue into
standard PVC fittings.
PVC Clear & Green Standard Suction Hose
Spiralite 110 & 115 Nominal Size Inch 3
⁄4" 1" 11
⁄4" 11
⁄2" 2"
Spiralite 110 - Green Item # 110-00-075 110-00-100 110-00-125 110-00-150 110-00-200
Spiralite 115 - Clear Item # 115-00-075 115-00-100 115-00-125 115-00-150 115-00-200
Price/ft. (Sold by the 100 ft. roll.) $1.26 $1.33 $1.59 $1.85 $2.03
Size 11
⁄2" 2" 21
⁄2" 3" 4"
Item # 3000-00-015 3000-00-020 3000-00-025 3000-00-030 3000-00-040
Price $7.89 $11.02 $12.97 $14.69 $17.04
115 110
Quick Spec
n APPEARANCE/CONSTRUCTION: Green PVC
with white helix. Smooth wall and interior.
n BENEFITS: Highly versatile and durable.
Smooth interior prevents material blockage.
n GENERAL APPLICATIONS: General suction
for water & light chemical solutions.
n TEMPERATURE RANGE: -10°F to +130°F
n STANDARD LENGTHS: 3
⁄4" thru 6" - 100ft.
8" and above - 20' 25' 30'
n VAC RATING: 28 in/HG @68°F
n WORKING PRESSURE: to 11
⁄2" 42PSI
Creamery/Paper Mill Washdown Pressure
Washer Hose
(Specification 3213B/3325T)
RECOMMENDED FOR: Cold and hot water up to 212°F (100°C) where steam is injected into
the water. Used for paper mill, food handling or processing plant washdown service requiring
hose with a non-marking cover.
CAUTION: NOT RECOMMENDED FOR USE WITH PURE STEAM.
Nom. I.D. Max W.P. Suction Min. Bend
 (In.) Sold By (PSI) (In. Hg) Radius (In.) Roll (Ft.) Item # Price/Ft.
 1
⁄2 x Reel Ft. 200PSI 25 5.0 700 3213-0401 $1.76
 1 Ft. 200PSI 15 8.0 50 3213-0416 3.64
 ¾ Ft. 200PSI 15 6.0 50 3213-0413 2.53
Exact Length 500' One Piece
 1
⁄2 x Reel Full Reel Only 200PSI 25 5.0 500 3213-0451 1.94
¾ x Reel Full Reel Only 200PSI 15 6.0 500 3213-0551 2.77
Pressure rating will vary with coupling
choice. Please Ask!!
Pressure rating will vary with coupling
choice. Please Ask!!
Quick Spec
n TEMPERATURE
-40°F to +212°F (-40°C to +100°C) continuous service.
-20°F to +180°F (-29°C to +82°C) continuous service. For nozzle only.
n CONSTRUCTION
Tube: Type P (EPDM). Black.
Type D (SBR). Black. For nozzle only.
Reinforcement: Synthetic, high tensile textile cord. Braided, high tensile synthetic
textile cord. For nozzle only.
Cover: Type P (EPDM). White. All sizes are perforated on plain end hose only.
Type D (Natural Rubber). Gray with green stripe. For nozzle only.
Clear PVC with white helix. Green PVC with white helix.
Renegade™ Acid-Chemical Hose
(Specification 4697G)
RECOMMENDED FOR: Tank truck, barge, ship, or storage tank transfer of a variety of chemical
products. Renegade contains a wire helix for full suction capability, as well as for routing hoses
through tight bends. The Ultrahigh Molecular Weight Polyethylene tube stock has excellent
chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling.
Quick Spec
n TEMPERATURE: -40°F to +212°F (-40°C to +100°C) normal service. Renegade is
designed to withstand fluid temperatures to 212°F (+100°C), how
ever the rating is dependent on the specific chemical conveyed.
n CONSTRUCTION: Tube: Type L (Ultrahigh Molecular Weight Polyethylene).
Clear, backed with Gatron™ Modified XLPE.
Reinforcement: Synthetic, high tensile textile with steel wire helix.
Cover: Type P (EPDM). Green corrugated with yellow spiral stripe.
Wide selection of Gates
Industrial Hose for every
application. Call Webb or
visit us on our website.
Sold by the 100 ft. roll.
Spiralite 3000 Spiral Bolt Clamp
Cadmium plated steel for 11
⁄2" through 12" corrugated hose.
www.facebook.com/webbplastics
Hose, Tubing & Fittings
Nom. I.D. Max W.P. Suction Min. Bend
 (In.) Sold By (PSI) (In. Hg) Radius (In.) Roll (Ft.) Item # Price/Ft.
 ¾ Ft. 200 PI 30 4.0 100 4697-0014 $13.98
 1 Ft. 200PSI 30 5.0 100 4697-0015 12.90
 11
⁄4 Ft. 200PSI 30 6.0 100 4697-0016 15.56
 11
⁄2 Ft. 200PSI 30 8.0 100 4697-0017 13.41
 2 Ft. 200PSI 30 9.0 100 4697-0018 16.55
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 127
127_127 3/31/14 7:42 AM Page 127
Quick Spec
n Tube: Cross-Linked Polyethylene (XLPE)
n Cover: Green EPDM with yellow stripe
n Reinforcement: Textile Plies with Helix Wire
n Temperature Range: -20° F to +160° F (-29°C to +71 °C)
WARNING! Check chemical resistance guide.
n Brand Description: Tape Brand - Yellow stripe with green letters
Hose, Tubing & Fittings
POLY-CHEM® Hose Series 7276
WARNING! Elevated temperatures can change chemical resistance ratings. Most chemical resistance guides are
based on testing performed at ambient 70°F (21°C) and higher temperatures are likely to change these ratings.
Many chemicals will become more aggressive as temperatures increase, reducing the ability of materials to
withstand them. It is the users responsibility to determine if the hose is compatible with the application.
Compatibility information can be requested from Parker for chemicals at elevated temperatures, it will be necessary
for users to perform compatibility testing if no data exists for the chemical at the temperature desired.
WARNING! Combination nipple and bands reduce the working pressure of the assembly to less than the
hose’s maximum working pressure. Refer to NAHAD Assembly Guidelines for working pressure.
 Item # I.D. (in.) Reinf. Plies O.D. (in.) Min. Bend Radius Max. Rec. WP Price/Ft.
 7276-752 3
⁄4 2 1.250 3.0 200 $10.26
 7276-1002 1 2 1.475 4.0 200 10.90
 7276-1252 11
⁄4 2 1.715 5.0 200 11.38
 7276-1502 11
⁄2 2 2.000 6.0 200 11.88
 7276-2002 2 2 2.545 8.0 200 13.63
 7276-3002 3 4 3.675 12.0 150 17.75
 7276-4002 4 4 4.720 16.0 150 24.86
Sold in standard 100' Lengths. Other sizes are available.
Compatible with 96% of chemicals and solvents.
POLY-CHEM® is a versatile hose handling
many types of chemicals and solvents in
both full suction and discharge applications.
Clear, cross-linked polyethylene
tube will not leach and contaminate product conveyed. Refer to the chemical guide in the
Safety and Technical Data from Parker, or contact Webb to determine compatibility with specific
chemicals and applications. Validated permanent crimp specs are available.
APPLICATIONS: Chemical Transport & Storage Tank Transfer
4:1 DESIGN FACTOR
ClearFLEX 60 and ClearFLEX 70-1 can be sterilized by autoclaving, gas or chemical methods.
BraidFLEX 70N can be sterilized by gas or chemical methods.
Ether-PUR FLEX 84 and Ester-PUR FLEX 85 can be sterilized by gas.
PolyFLEX 50 can be sterilized by chemical methods.
n Autoclaving (121°C, 15 psig for 20 minutes) – Clean and rinse tubing with distilled water
before autoclaving. Certain chemicals which have no appreciable effect on resins at room temperature
may cause deterioration at autoclaving temperatures unless removed with distilled
water beforehand.
n Gas – ethylene oxide formaldehyde
n Chemicals – benzalkonium chloride, formalin, ethanol, etc.
FLEX Tubing Products ClearFLEX 60 ClearFLEX 70 -1 FuelFLEX 65 BraidFLEX 70N FLEX GP70 Ether-PUR FLEX 84 Ester-PUR FLEX 85 PolyFLEX 50
Resin PVC PVC PVC PVC, Reinf. PVC PUR Ether PUR Ester LDPE
Certifications Food Grade Food Grade — Food Grade Food Grade Food Grade Food Grade Food Grade
 USP VI USP VI USDA USDA USDA
 USDA USDA NSF-51
 NSF-51
 3A
Durometer (Shore) 60 (A) 70 (A) 65 (A) 70 (A) 70 (A) 84 (A) 85 (A) 50 (D)
Specific Gravity 1.19 1.20 1.23 1.20 1.21 1.12 1.20 0.92
Operating Temperature Range (°F) –25 to 160 –10 to 175 –15 to 165 –5 to 180 –10 to 175 –70 to 175 –70 to 175 –100 to 175
Tensile Strength, psi 1650 2200 1900 2000 2400 5500 5000 1700
Color Crystal Crystal Transparent Clear Crystal Transparent Transparent Translucent
 Clear Clear Yellow Clear
Odor Slight Slight Slight Slight Slight None Slight Slight
Taste Imparted None None N/A None None N/A N/A None
Tear Strength Good Good Good Very Good Good Excellent Excellent Very Good
Bend Radius* 4 x O.D. 5 x O.D. 4 x O.D. 6 x O.D. 5 x O.D. 6 x O.D. 6 x O.D. 8 x O.D.
Elongation (%) 450 400 425 350 350 500 500 600
Flame Resistance Self-Ext. Self-Ext. Self-Ext. Self-Ext. Self-Ext. Burns Burns Slow Burn
Abrasion Resistance Very Good Very Good Very Good Good Very Good Excellent Excellent Good
Corrosion Resistance Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent
* This calculation is an approximation and Finger Lakes Extrusion recommends that you test under your own conditions.
Selection Guide for FLEX™Tubing Products
Sterilization of FLEX Brand Tubing Products:
Hose Cutter
To give a clean cut at right
angles to the tube from
12 to 25 mm. for hose
up to 1".
Also See Page 109 For More Options
Item # Price
30007111 $36.90
Replacement Blades 9.75
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 128
128_128 3/30/14 4:09 PM Page 128
Clear Flex Premium PVC Tubing Braid Flex 70 Reinforced Tubing
 I.D. O.D. Wall Wk. Press Standard Durometer Durometer
 (In.) (In.) Thickness @ 73°F Reel Length Flex 60 Price/Ft. Flex 70-1 Price/Ft.
 3
⁄32 5
⁄32 1
⁄32 100 8160-4220 $.14 8170-4220 $.14
 1
⁄8 1
⁄4 1
⁄16 50 100 8160-4245 .17 8170-4245 .17
 3
⁄16 5
⁄16 1
⁄16 36 100 8160-4295 .19 8170-4295 .19
 1
⁄4 3
⁄8 1
⁄16 30 100 8160-4335 .21 8170-4335 .21
 1
⁄4 1
⁄2 1
⁄8 46 100 8160-4345 .46 8170-4345 .45
 5
⁄16 7
⁄16 1
⁄16 28 100 8160-4390 .25 8170-4390 .25
 3
⁄8 1
⁄2 1
⁄16 22 100 8160-4430 .28 8170-4430 .27
 3
⁄8 5
⁄8 1
⁄8 40 100 8160-4440 .60 8170-4440 .60
 1
⁄2 11⁄16 3
⁄32 34 100 8160-4510 .64 8170-4510 .62
 1
⁄2 5
⁄8 1
⁄16 20 100 8160-4505 .45 8170-4505 .44
 1
⁄2 3
⁄4 1
⁄8 30 100 8160-4515 .82 8170-4515 .80
 5
⁄8 7
⁄8 1
⁄8 26 100 8160-4570 .93 8170-4570 .92
 3
⁄4 1 1
⁄8 22 50 8160-2605 1.08 8170-2605 1.06
 1 11
⁄4 1
⁄8 18 50 8160-2675 1.41 8170-2675 1.38
 1 11
⁄2 1
⁄4 26 50 8160-2685 2.13 8170-2685 2.09
 11
⁄4 15
⁄8 3
⁄16 22 50 8160-2715 2.78 8170-2715 2.72
 11
⁄2 2 1
⁄4 24 50 8160-2755 4.39 8170-2755 4.31
 2 21
⁄2 1
⁄4 18 50 8160-2790 7.63 8170-2790 7.49
Sold in Standard Reel Lengths.
The interwoven reinforcement locks
braid into place. Movement is minimized,
strength is maintained, and the chance
of del am i na tion is greatly reduced.
Even with this superior re in force ment,
Finger Lakes 70 remains extremely
flexible. Finger Lakes 70 complies fully
with FDA criteria.
Flex GP 70 PVC Clear Tubing
A cost-effective selection
when your ap pli -
ca tion does not require
pre mi um-grade, higher
per for mance PVC tubing.
Its materials com -
ply with the Food
Additives Amendment
of the FDA and is flexible
and transparent.
 Inside Outside Wall Wk. PSI
 Item # Diameter Diameter Thickness @ 73°F Price/Ft.
 8470-4340 1
⁄4 7
⁄16 3
⁄32 275 $.81
 8470-4395 5
⁄16 1
⁄2 3
⁄32 275 .83
 8470-4435 3
⁄8 9
⁄16 3
⁄32 250 .85
 8470-4515 1
⁄2 3
⁄4 1
⁄8 230 1.12
 8470-4570 5
⁄8 7
⁄8 1
⁄8 210 1.78
 8470-2605 3
⁄4 1 1
⁄8 175 1.98
 8470-2680 1 15
⁄16 5
⁄32 140 2.88
 8470-2715 11
⁄4 15
⁄8 3
⁄16 100 4.93
 8470-2750 11
⁄2 17
⁄8 3
⁄16 80 5.92
 8470-2790 2 2 1
⁄2 1
⁄4 70 11.61
Sold in 100 Ft. Lengths.
Webb tech tip
For an easier connection or disconnection between PVC tubing and barbed
fittings, dip the tubing in hot water. The hot water helps soften and expand PVC tubing
allowing it to fit over or slide off the fitting more easily.
Durometer: 70
Call for
additional
lengths.
Call for
additional
lengths.
Quick Spec
n Clear and flexible
n Complies with FDA CFR 21 for food packaging
n Resists aging
n Resistant to a broad range of chemicals
n Excellent wearability
n Easy to connect
n Smooth inner wall; excellent flow characteristics
n Cost-effective alternative to ClearFLEX for applications
that don’t require regulatory compliances
n Light weight, yet tough and abrasion-resistant
Quick Spec
n Long service life – non-aging,
non-oxidizing.
n Smooth inner wall resists build-up
n Tight bend radius
n Soft and flexible – easy to slip
over fittings
n Outstandinq flex life
Quick Spec
n Complies with FDA CFR 21 for
food packaging
n Embedded braid prevents material
entrapment, ensures easy cleaning
n Easy to bend into place
n Suitable for use with foods and beverages
n Flexible; permits tight compression of
crimp fittings for leakproof connections
n Maximum working pressure clearly
printed on tubing
n Clear tubinq allows full visual flow
monitoring
As Low As
14c/ft
Hose, Tubing & Fittings
 Standard I.D. O.D. Wall Wk. Press Price
 Item # Reel Length (In.) (In.) Thickness @ 73°F Per ft.
 8200-4170 100 1
⁄16 1
⁄8 1
⁄32 66 $.12
 8200-4240 100 1
⁄8 3
⁄16 1
⁄32 46 .13
 8200-4245 100 1
⁄8 1
⁄4 1
⁄16 62 .13
 8200-4295 100 3
⁄16 5
⁄16 1
⁄16 54 .15
 8200-4335 100 1
⁄4 3
⁄8 1
⁄16 54 .16
 8200-4345 100 1
⁄4 1
⁄2 1
⁄8 66 .47
 8200-4390 100 5
⁄16 7
⁄16 1
⁄16 48 .39
 8200-4400 100 5
⁄16 9
⁄16 1
⁄8 66 .39
 8200-4430 100 3
⁄8 1
⁄2 1
⁄16 44 .41
 8200-4440 100 3
⁄8 5
⁄8 1
⁄8 58 .46
 8200-4505 100 1
⁄2 5
⁄8 1
⁄16 28 .46
 8200-4515 100 1
⁄2 3
⁄4 1
⁄8 44 .66
 8200-4560 100 5
⁄8 3
⁄4 1
⁄16 28 .71
 8200-4570 100 5
⁄8 7
⁄8 1
⁄8 38 .79
 8200-2605 50 3
⁄4 1 1
⁄8 34 .91
 8200-2640 50 7
⁄8 11
⁄8 1
⁄8 30 1.01
 8200-2675 50 1 11
⁄4 1
⁄8 24 1.07
 8200-2690 50 1 1 1
⁄2 1
⁄4 44 2.23
 8200-2710 50 11
⁄4 11
⁄2 1
⁄8 20 1.45
 8200-2720 50 11
⁄4 13
⁄4 1
⁄4 44 2.77
 8200-2755 50 11
⁄2 2 1
⁄4 38 3.31
 8200-2790 50 2 21
⁄2 1
⁄4 34 5.74
 8200-2805 50 21
⁄4 23
⁄4 1
⁄4 34 6.69
 8200-2815 50 21
⁄2 3 1
⁄4 30 7.98
 8200-2840 50 3 31
⁄2 1
⁄4 25 11.72
Sold in Standard Reel Lengths.
See Plastic Tube
Cutter on page 128.
DUROMETER CLEAR FLEX 60
Very clear tubing that complies with
USP Class VI, USDA and FDA CFR 21.
DUROMETER CLEAR FLEX 70-1
Crystal clear tubing that complies with
USC Class VI, NSF 51, 3A, USDA and
FDA CFR 21 requirements.
FEATURES AND BENEFITS:
n Complies with FDA CFR 21
for food packaging
n Semi-rigid and translucent
n Low in extractables
n Offers a wide range of working temperatures
n Resistant to a broad range of chemicals
Recommended Applications:
n Transfer of foods and beverages, Instrumentation, Chemical lines
PolyFLEX™ 50 LDPE Tubing
– Natural & Black
Natural Black I.D. O.D. Wall Oper. Pressure
Item # Item # (In.) (In.) Size psig @ 73°F Price/Ft.
8750-4245 8752-4245 1
⁄8 1
⁄4 1
⁄16 200 $.17
8750-4281 8752-4281 .170 1
⁄4 .040 120 .17
8750-4335 8752-4335 1
⁄4 3
⁄8 1
⁄16 120 .23
8750-4430 8752-4430 3
⁄8 1
⁄2 1
⁄16 86 .32
8750-4505 8752-4505 1
⁄2 5
⁄8 1
⁄16 66 .33
8750-2605 — 3
⁄4 1 1
⁄8 80 1.47
Sold in 100' Reels. Call for other options.
NEW
Durometer: 70
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 129
129_129 3/30/14 4:12 PM Page 129
Hose, Tubing & Fittings
Pure Fit® TC Standard Size Tube Clamps
Pure-Fit® TC Tube Clamps represent a
new generation of clamping technology. They feature an outer
body; a press-down locking system that is fully encapsulated to
guard against untimely or unwanted release; a side release mechanism
that facilitates secure, single-handed installation and operation;
and an integral bore hole for absolute lock-out capabilities.
n Pure-Fit® TC’s innovative design allows for complete flow stoppage,
and the clamp can be installed over the tube in the normal
fashion or put together after the tube is already part of a
completed assembly.
n Pure-Fit® TC Tube Clamps are constructed from high performance
thermoplastic materials (PVDF or polypropylene), and
come in two standard sizes (3
⁄8" and 3
⁄4") to accommodate a
wide range of tubing products.
n Pure-Fit® TC Tube Clamps are autoclavable and sterilizable and
meet all USP Class VI criteria. They have been physically tested
to meet the most demanding applications.
Cuts from 1
⁄16" to 3
⁄4" O.D. tubing.
An easy to handle razor-edged
tube cutter, closes automatically,
assuring clean and square cuts.
May be used with polyethylene,
polypropylene, nylon and other
plastic tubing.
Plastic Tube
Cutter
Item # Description Price
PTC Plastic Tube Cutter $5.97
PTC001RB Replacement Blade 1.91
Allows precise, one-hand regulation
of liquid flow from completely
open to completely
closed. This all-plastic autoclavable
clamp won’t rust, corrode
or deform. Molded of
durable polypro pylene. Fits tubing
with l
⁄4 in. to 7
⁄16 in. O.D.
Item # 6165-0002
Only $4.68
Pinch Clamp
 PP PVDF
Tensile Strength PSI 4800 6300
Hardiness 72 78
Heat Deflection
66 PSI @ 189 °F 266 °F
264 PSI @ - 221 °F
Max. Working Temp 220 275
Parflex Polyethylene Tubing
Instrument Grade
Parflex Polypropylene Tubing Laboratory Grade
Parflex flexible polyethylene thermoplastic tub ing is extruded from high molecular weight resin
for in creased dimensional stability, uniformity and long-term strength. Its re sis tance to en vi -
ron men tal stress cracking greatly exceeds that of ordinary poly eth yl ene tubing. Parflex polyethylene
tubing is available in black as well as seven coding colors as rec om -
mend ed by the Instrument Society of America. Black (EB) tubing contains an
ultraviolet inhibitor which is rec om mend ed for use in sunlit areas.
 Item # Color O.D. I.D. Price/ft.
E-43-0100 Natural 1
⁄4 .170 $.26
EB-43-0100 Black 1
⁄4 .170 .26
E-53-0100 Natural 5
⁄16 .187 .31
EB-53-0100 Black 5
⁄16 .187 .31
E-64-0100 Natural 3
⁄8 .250 .43
EB-64-0100 Black 3
⁄8 .250 .43
E-86-0100 Natural 1
⁄2 .375 .65
EB-86-0100 Black 1
⁄2 .375 .59
E-108-0100 Natural 5
⁄8 .500 .94
EB-108-0100 Black 5
⁄8 .500 .94
Parker Parflex flexible polypropylene tubing
may be used at higher temperatures and
working pressures than polyethylene tubing.
Resistance to hot water and hot corrosive
acids is excellent. Polypropylene tubing will
last many times longer than nylon tubing in
hot water service. Parker polypropylene
tubing is available in pure white or ultra-violet
resistance black formulations. White polypropylene meets
all spec i fi ca tions of the U.S.F.D.A. for materials in contact with
foods or drugs used for human consumption. Good re sis tance
to mineral and vegetable oils.
 O.D. in. Working Pressure
 Item # Color ±.005 Nom. I.D. @ 73°F Price/ft.
 PP-21-1000 White 1
⁄8 .080 300 $.15
 PPB-21-1000 Black 1
⁄8 .080 1000 .15
 PP-32-0500 White 3
⁄16 .120 300 .26
 PPB-32-0500 Black 3
⁄16 .120 500 .26
 PP-43-0500 White 1
⁄4 .170 300 .30
 PPB-43-0500 Black 1
⁄4 .170 500 .30
 PP-53-0500 White 5
⁄16 .187 300 .49
 PPB-53-0500 Black 5
⁄16 .187 500 .49
 PP-64-0500 White 3
⁄8 .250 300 .57
 PPB-64-0500 Black 3
⁄8 .250 500 .57
 PP-86-0250 White 1
⁄2 .375 250 .99
 PPB-86-0250 Black 1
⁄2 .375 250 .99
 PP-108-0100 White 5
⁄8 .500 100 1.71
 PPB-108-0100 Black 5
⁄8 .500 100 1.71
As Low As
14c/ft
Polyurethane Tubing
SERIES U: POLYETHER BASE –
Used for a wide variety of applications.
Typical usage includes air tools, robotics,
Colors: Red, Clear & Black Std. Roll Tube O.D. Tube I.D. Working Pressure Min. Burst Pressure
 Item # Length (In.) (In.) at 73°F PSI at 73°F Price/Ft.
 U-21-0250 250' 1
⁄8 1
⁄16 125 375 $.29
 U-32-0250 250' 3
⁄16 1
⁄8 125 375 .53
 U-42-0250 250' 1
⁄4 1
⁄8 125 375 .81
 U-64-0100 100' 3
⁄8 1
⁄4 125 375 1.11
 U-85-0100 100' 1
⁄2 21⁄64 125 375 2.29
 U-86-0100 100' 1
⁄2 3
⁄8 85 375 2.13
 U-96-0100 100' 9
⁄16 3
⁄8 125 375 2.37
U-128-0100 100' 3
⁄4 1
⁄2 125 375 5.13
Sold Standard Roll Length
Sold in 100' Lengths.
Call for Other Lengths.
Sold in Standard Box Quantity. Call for Other Lengths.
pneumatic logic and actuation systems, analytical
instrumentation, vacuum equipment,
pressure measurement apparatus, semiconductor
equipment manufacturers and a variety
of medical and laboratory applications.
n Medium durometer (90 to 95 Shore A).
n The tubing is tough, strong, kink resistant
and abrasion resistant.
n Excellent hydrolytic stability.
n Broad temperature range.
n Flexible and easy to assemble onto designated
fittings.
n Recommended operating temperature range at rated pressures
with compatible fluids is -40°F (-40°C) to +180°F (+82°C).
Item # Material Tubing Range OD Minimum Wall Price
PFTC375PP Polypropylene 1
⁄8 – 3
⁄8 .030 $3.89
PFTC750PP Polypropylene 3
⁄8 – 3
⁄4 .060 4.81
PFTC375PVDF PVDF 1
⁄8 – 3
⁄8 .030 6.96
PFTC750PVDF PVDF 3
⁄8 – 3
⁄4 .060 12.24
PFTC150 PVDF 3
⁄4 – 2 1
⁄16 -
1
⁄8 25.09
PFTC250 PVDF 3
⁄4 – 2 1
⁄8 – 1
⁄4 25.09
Sold In Pack Quantity Only
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 130
130_130 3/30/14 4:13 PM Page 130
Hand Flaring Tool
Hose, Tubing & Fittings
PFA & PVDF Flare Fittings FOR HIGH-PURITY APPLICATIONS AND PROCESSING – SIZES ¼" TO 1¼"
Fit-LINE is your resource for innovative and
economical fittings solutions for high-purity
applications and processing.
We help the Semiconductor, Biotech, Pharmaceutical
and Ultra Pure Water industries
dispense high-purity fluids with SEMI-F57-
0301 compliant PFA and PVDF flare fittings.
Quality
Every Fit-LINE fitting is manufactured from
virgin high purity PFA or PVDF resin providing
chemical resistance and ultra-high purity and
are SEMI F57-0301 compliant.
Compatibility
Fit-LINE fittings are compatible and interchangeable
with all other fine-threaded flare
fitting systems. These fittings can be used
with PFA, FEP and PTFE tubing.
Size Range
Size range is from ¼" through 1¼" in all the
popular fitting configurations. Special fitting
configurations are available, on a custom
basis, please contact us for details.
CUSTOM
FABRICATIONS
Every Fit-LINE
custom welded
fabrication is
manufactured
from virgin high purity PFA resin providing
chemical resistance and ultra-high purity.
Custom welded manifolds and delivery systems
from your idea
to a working model in
a matter of days.
TRUFLARE™ SYSTEM Precise Assembly
Fit-LINE’s TruFLARE™ replicates the close tolerances
consistent
with FitLINE'S
patented
TightFLARE™
technology.
Our patented
TruFLARE™ tube flaring system is designed
for precise and repeatable tube flares, making
fitting assemblies easier and more cost effective
for standard size fluoropolymer tubing.
Application and installation usage has proved
TruFLARE™ tube flaring technology to be far
superior to any other existing tube flaring
technology in use.
Property ASTM Method PTFE FEP PFA PEEK THV PVDF ETFE
Elongation (%) D638 200 - 400 300 - 380 340 - 400 50 600 200 - 300 400 - 450
Tensile Strength (Mpa) D638 20 - 35 91 19 - 39 89 20 49 - 60 44 - 54
Flexural Modulus (Gpa) D790 0.34 - 0.62 0.5 0.5 - 0.6 3.65 - 13 0.03 - 0.5 0.2 - 0.8 0.5 - 1.3
Max Service Temp N/A 260°C 200°C 260°C 260°C 150°C 150°C 150°C
Min Service Temp N/A -268°C -240°C -268°C -240°C -55°C -40°C -65°C
Chemical Resistance N/A Excellent Excellent Excellent Excellent Moderate Moderate Excellent
Coefficient of Friction D1894 0.1 0.05 0.2 0.35 - 0.5 TBD 0.4 006
This table lists the generally accepted summary of properties of non-pigmented resins from which Zeus fabricates its line of tubing and other unique extrusions.
Non-Pigmented Properties Chart
Zeus – PFA 450HP High Purity Tubing
 Item # O.D. Wall Roll Length Price/ft.
 OPN46697 .250 .047 100' Call
 OPN46812 .250 .047 250' Call
 OPN46816 .375 .063 100' Call
 OPN46817 .375 .063 250' Call
 OPN46983 .500 .063 100' Call
 OPN46983 .500 .063 250' Call
 OPN46990 .750 .063 100' Call
 OPN46989 .750 .063 250' Call
 OPN46993 1.00 .063 100' Call
 OPN46992 1.00 .063 250' Call
Sold by the roll. The above items represent Standard Pack
Configurations. Other lengths, dimensions and tolerances available.
Pricing and item minimums may vary - please call for quote.
Quick Spec
n All tolerances are ±.005 unless
otherwise specified.
n All items are laser printed, end-capped and double
bagged in compliance with F-57 specifications.
n All material meets the stringent requirements for low
level extractables and contaminents as detailed in Semi
F-57 spec.
PFA HP (High Purity) Tubing was specifically designed for
the challenging environment of semiconductor manufacturing.
The unique molecular structure of PFA HP resin
reduces chemical extractable and protects against ionic
contamination. In fact PFA HP is non-reactive with virtually
all chemicals.
Female Elbow
FE Series
Union Elbow
UE Series
Union Tee
UT Series
Male Elbow
ME Series
TightFLARE™ Male
Reducer TFM Series
TightFLARE™ Male
Increaser TFM Series
TightFLARE™ Union
TFU Series
Straight Union Panel
Mount SPM Series
Straight Union SU
Series
Female Connector
FC Series
Male Connector
MC Series Item# Description Price
FT-4 1
⁄4" Hand Flaring Tool $180.23
FT-6 3
⁄8" Hand Flaring Tool 180.23
FT-8 1
⁄2" Hand Flaring Tool 180.23
FT-12 3
⁄4" Hand Flaring Tool 180.23
FT-16 1" Hand Flaring Tool 180.23
Over 90 Type Standard Fittings to Select From
Visit www.fwwebb.com/plastics for the complete offering of fittings and tools.
These properties, combined with Zeus' specialized manufacturing
process, result in a PFA HP tube with superior I.D. surface
smoothness and overall dimensional consistency.
Starting as little as
$
9 21 per fitting
 Max. Working* Pressure (PSI)
 Nominal Nominal Nominal @70°F @122°F Price/
Item # OD (In) ID (In) Wall (In) (20°) (50°) 100 ft.
KPE-007 1
⁄4 .170 .040 140 60 $11.24
KPE-017 3
⁄8 .250 .062 125 50 12.03
KPE-019 1
⁄2 .375 .062 100 35 13.14
KPE-029 5
⁄8 .500 .062 75 25 14.33
Series 220 – Nominal Specifications
FEATURES
n Economical and lightweight.
n LLDPE resin provides excellent environmental
stress crack resistance.
n Natural color.
n Excellent resistance to solvents.
n Chemically inert.
APPLICATIONS
n Transfer of air
and liquids in industrial
applications.
n Water lines.
n Water softener lines.
n Pneumatic logic control
lines.
n Vending equipment.
CONSTRUCTION
Linear low density food
grade polyethylene tubing
in compliance with FDA
requirements - natural
color. Also in compliance
with RoHS requirements.
Kentak E-1000 Food Grade LowDensity
Polyethylene Tubing
*Note: Working Pressure decreases as temperature increases.
Pressure ratings can only be obtained with proper coupling procedures.
Sold in 100' coils. Call for other lengths.
Service Temp. Range: -50°F to +125°F
KPE SERIES - SIZES RANGE FROM 1
⁄4" OD THROUGH 2" OD
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 131
131_131 3/30/14 4:15 PM Page 131
Fluoropolymer Tubing
Hose, Tubing & Fittings
 Order Nominal Nominal Reference Working Burst
 Size O.D. I.D. Wall Pressure Pressure
Item # Inch Inch Inch Inch PSI/72?F PSI/72?F Price/Ft.
101 – PTFE Industrial Wall Fractional Size Tubing
101-0094031 3
⁄32" 0.094 0.031 0.031 390 1950 –
101-0125031 1
⁄8" 0.125 0.062 0.031 290 1450 $.67
101-0156031 5
⁄32" 0.156 0.094 0.031 220 1100 .93
101-0188031 3
⁄16" 0.188 0.125 0.031 180 900 1.03
101-0250031 1
⁄4" 0.250 0.190 0.031 130 650 1.41
101-0312031 5
⁄16" 0.312 0.250 0.031 100 500 1.91
101-0375031 3
⁄8" 0.375 0.312 0.031 80 400 2.46
101-0438031 7
⁄16" 0.438 0.375 0.031 70 350 2.63
101-0500031 1
⁄2" 0.500 0.438 0.031 60 300 3.09
101-0563031 9
⁄16" 0.563 0.500 0.031 55 275 3.56
101-0625031 5
⁄8" 0.625 0.563 0.031 50 250 4.12
101-0688031 11⁄16" 0.688 0.625 0.031 45 225 4.33
101-0750032 3
⁄4" 0.750 0.688 0.032 40 200 4.75
101-0830040 .830" 0.830 0.750 0.040 45 225 5.22
101-0965045 .965" 0.965 0.875 0.045 45 225 7.80
101-1100050 1.100" 1.100 1.000 0.050 40 200 11.92
Sold 100’ Rolls, Call regarding special roll lengths.
Manufactured for use in hostile environments where purity is critical.
Testing has proven that these High Purity PFA products are able to
withstand corrosive surfactants for longer periods of time than the
standard products. High Purity PFA products
are available in various sizes upon request.
Materials:
n Products are manufactured using resins
complying with ASTM D 3307 Type II Spec.
n FEP products are manufactured using resins
complying with ASTM D 3296-98 Spec.
n PTFE Products are manufactured using
resins complying with ASTM D 3295 Spec.
Flammability:
n Listed VW-1 by the Underwriters’ Labs, Inc.
in its burning test classification for polymeric
materials and passes the UL 83 vertical
flame test. In a flame situation, High Purity
PFA, FEP & PTFE tubing resist combustion
and does not promote flame spread.
FDA Compliance:
n Most high-purity PFA, FEP & PTFE resins
qualify for use in contact with food in
compliance with FDA regulation 21 CFR
177.1550.
Temperature Ranges:
n HP PFA = -100°F to 500°F
n PFA = -100°F to 500°F
n FEP = -100°F to 400°F
n PTFE = -100°F to 500°F
TexFluor™ PFA tubing
is well-suited for
any corrosive or high
purity application.
PFA (Perfluoroalkoxy)
is the material of
choice in applications requiring excellent chemical
resistance, high temperature exposure, clarity
and long continuous lengths. Parker TexLoc’s
resin is a standard grade with a high molecular
weight and high resistance to stress cracking.
The tubing can be used with flare or conventional
fittings, and is available in a wide range
of sizes.
n No process contamination
n Lowest levels of extractables
n Translucent and flexible materials
n Chemically inert to nearly all industrial
chemicals and solvents
n Nonflammable materials
n Low permeability
 Order Nominal Nominal Reference Working Burst
 Size O.D. I.D. Wall Pressure Pressure
Item # Inch Inch Inch Inch PSI/72?F PSI/72?F Price/Ft.
104 – PFA Industrial Wall Fractional Size Tubing
104-0094031 3
⁄32" 0.094 0.031 0.031 680 3400 –
104-0125031 1
⁄8" 0.125 0.064 0.031 500 2500 $.98
104-0156031 5
⁄32" 0.157 0.094 0.031 390 1950 1.18
104-0188031 3
⁄16" 0.188 0.125 0.031 320 1600 1.25
104-0250031 1
⁄4" 0.250 0.188 0.031 230 1150 1.60
104-0312031 5
⁄16" 0.312 0.250 0.031 180 900 1.95
104-0375031 3
⁄8" 0.375 0.312 0.031 140 700 2.35
104-0438031 7
⁄16" 0.438 0.375 0.031 120 600 2.84
104-0500031 1
⁄2" 0.500 0.438 0.031 100 500 3.23
Also available: 3
⁄16" through 1": 104 – PFA Heavy Wall Fractional Size Tubing
Also available: 4mm through 12mm: 204 – Metric PFA Tubing
Continuous Operating Temperature: -100 to 500?F /-75 to 260?C
Sold 100’ Rolls, Call regarding special roll lengths. Minimum quantities may apply.
TexFluor™ FEP tubing exhibits the highest clarity
offered. This clarity makes this tubing ideal for flow
monitoring applications. TexFluor™ FEP also uses a
high molecular weight resin that has the best stress
crack resistance. It is widely used in water purification
systems due to its excellent transmission of UV light.
 Order Nominal Nominal Reference Working Burst
 Size O.D. I.D. Wall Pressure Pressure
Item # Inch Inch Inch Inch PSI/72?F PSI/72?F Price/Ft.
103 – FEP Industrial Wall Fractional Size Tubing
103-0062016 1
⁄16" 0.062 0.031 0.016 48 2400 –
103-0094031 3
⁄32" 0.094 0.031 0.031 630 3150 –
103-0125031 1
⁄8" 0.125 0.062 0.031 470 2350 $.76
103-0156031 5
⁄32" 0.157 0.094 0.031 360 1800 1.13
103-0188031 3
⁄16" 0.188 0.125 0.031 290 1450 1.14
103-0250031 1
⁄4" 0.250 0.188 0.031 210 1050 1.41
103-0312031 5
⁄16" 0.312 0.250 0.031 160 800 1.86
103-0375031 3
⁄8" 0.375 0.312 0.031 130 650 2.18
103-0438031 7
⁄16" 0.438 0.375 0.031 110 550 2.54
103-0500031 1
⁄2" 0.500 0.438 0.031 90 450 2.91
103-0563031 9
⁄16" 0.563 0.500 0.031 80 400 3.25
Sold 100’ Rolls, Call regarding special roll lengths. Minimum quantities may apply.
Parker TexLoc’s line of
TexFluor™ tubing is
the most flexible product offered. PTFE tubing
resists corrosive liquids and gases, and
has the broadest temperature range of all
Fluoropolymer products. The tubing has a
smooth non-stick surface with low permeability.
n Most flexible Fluoropolymer available
n Chemically inert to nearly all industrial
chemicals and solvents
n Low permeability
n Excellent electrical properties
PFA Tubing
FEP Tubing
PTFE Tubing
High Purity PFA Tubing
SPECIFICATIONS
NEW NEW
NEW
Schedule 40 Pipe is also available.
Part numbers are for standard configurations. For complete part numbers and options for material, color, packaging, etc., please contact Webb.
n Chemically inert to nearly all industrial
chemicals and solvents
n Weldable
n Translucent and flexible materials
n Low refractive index
n Lower cost alternative to PFA
 Order Nominal Nominal Reference Working Burst
 Size O.D. I.D. Wall Pressure Pressure
Item # Inch Inch Inch Inch PSI/72?F PSI/72?F Price/Ft.
105 – HP PFA Industrial Wall Fractional Size Tubing
105-0125031 1
⁄8" 0.125 0.064 0.031 500 2500 $.99
105-0188031 3
⁄16" 0.188 0.125 0.031 320 1600 1.47
105-0250031 1
⁄4" 0.250 0.188 0.031 230 1150 2.05
105-0375031 3
⁄8" 0.375 0.312 0.031 140 700 3.17
105 – HP PFA Heavy Wall Tubing
105-0250047 1
⁄4" 0.250 0.156 0.047 360 1800 2.86
105-0250062 1
⁄4" 0.250 0.125 0.062 500 2500 3.49
105-0375062 3
⁄8" 0.375 0.250 0.062 320 1600 5.17
105-0500062 1
⁄2" 0.500 0.375 0.062 230 1150 7.02
105-0750062 3
⁄4" 0.750 0.625 0.062 140 700 9.79
105-1000062 1" 1.000 0.875 0.062 100 500 14.15
Also available: 3mm through 10mm: 205 Metric HP PFA Tubing
Sold 100’ Rolls, Call regarding special roll lengths.
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 132
132_132 3/30/14 4:16 PM Page 132
Hose, Tubing & Fittings
PVC Insert Fittings For use with polyethylene pipe and various types of tubing.
Tee (Insert x Insert x Insert)
 Item # Size Price
 1401-005 1
⁄2 $1.38
 1401-007 3
⁄4 1.50
 1401-010 1 1.95
 1401-012 11
⁄4 3.03
 1401-015 11
⁄2 3.45
 1401-020 2 6.80
Tee (Insert x Insert x Fipt)
 Item # Size Price
 1402-005 1
⁄2 $1.50
 1402-007 3
⁄4 2.27
 1402-010 1 2.65
 1402-012 11
⁄4 3.90
 1402-015 11
⁄2 6.77
 1402-020 2 8.39
Tee (Insert x Insert x Mipt)
 Item # Size Price
 1403-005 1
⁄2 $1.92
 1403-007 3
⁄4 2.61
 1403-010 1 3.34
 1403-012 11
⁄4 4.35
 1403-015 11
⁄2 4.87
 1403-020 2 7.58
90° Ell (Insert x Insert)
 Item # Size Price
 1406-005 1
⁄2 $1.26
 1406-007 3
⁄4 1.53
 1406-010 1 1.71
 1406-012 11
⁄4 1.92
 1406-015 11
⁄2 2.27
 1406-020 2 3.14
 1406-025 21
⁄2 14.19
90° Ell (Insert x Mipt)
 Item # Size Price
 1413-005 1
⁄2 $1.60
 1413-007 3
⁄4 2.19
 1413-010 1 2.88
 1413-012 11
⁄4 3.83
 1413-015 11
⁄2 5.08
 1413-015H 11
⁄2 5.08
 1413-020 2 8.01
Coupling (Insert x Insert)
 Item # Size Price
 1429-005 1
⁄2 $.65
 1429-007 3
⁄4 .78
 1429-010 1 .81
 1429-012 11
⁄4 1.19
 1429-015 11
⁄2 1.41
 1429-020 2 2.68
 1429-025 21
⁄2 6.92
 1429-030 3 11.77
 1429-040 4 16.02
Reducer Coupling (Insert x Insert)
 Item # Size Price
 1429-101 3
⁄4 x 1
⁄2 $1.05
 1429-130 1 x 1
⁄2 1.43
 1429-131 1 x 3
⁄4 1.07
 1429-I67 11
⁄4 x 3
⁄4 2.21
 1429-168 11
⁄4 x 1 1.71
 1429-210 11
⁄2 x 3
⁄4 2.68
 1429-211 11
⁄2 x 1 2.56
 1429-212 11
⁄2 x 11
⁄4 2.00
 1429-249 2 x 1 3.62
 1429-250 2 x 11
⁄4 3.38
 1429-251 2 x 11
⁄2 3.22
Female Adapter (Fipt x Insert)
 Item # Size Price
 1435-005 1
⁄2 $2.80
 1435-007 3
⁄4 3.05
 1435-010 1 3.38
 1435-012 11
⁄4 4.16
 1435-015 11
⁄2 5.28
 1435-020 2 8.90
Male Adapter (Mipt x Insert)
 Item # Size Price
 1436-005 1
⁄2 $.65
 1436-007 3
⁄4 .78
 1436-010 1 .80
 1436-012 11
⁄4 1.26
 1436-015 11
⁄2 1.41
 1436-020 2 2.70
 1436-025 21
⁄2 11.12
 1436-030 3 12.83
 1436-040 4 17.86
Reducing Male Adapter
(Mipt x Insert)
 Item # Size Price
 1436-074 1
⁄2 x 3
⁄4 $2.00
 1436-101 3
⁄4 x 1
⁄2 1.81
 1436-102 3
⁄4 x 1 2.05
 1436-131 1 x 3
⁄4 1.86
 1436-132 1 x 11
⁄4 2.52
 1436-133 1 x 11
⁄2 3.79
 1436-167 11
⁄4 x 3
⁄4 2.21
 1436-168 11
⁄4 x 1 2.35
 1436-169 11
⁄4 x 11
⁄2 3.79
 1436-211 11
⁄2 x 1 2.88
 1436-212 11
⁄2 x 11
⁄4 2.88
 1436-213 11
⁄2 x 2 4.87
 1436-251 2 x 11
⁄2 4.84
Hose Adapter
(Male Hose Thread x Insert)
 Item # Size Price
1436-007MHT 3
⁄4 $1.89
Reducing Hose Adapter
(Male Hose Thread x Insert)
 Item # Size Price
1436-101MHT 3
⁄4 x 1
⁄2 $1.77
1436-102MHT 3
⁄4 x 1 2.06
Insert x IPS Spigot Adapter
 Item # White Item # Size Price
460-005G 460-005 1
⁄2 $.89
460-007G 460-007 3
⁄4 1.17
460-010G 460-010 1 1.23
460-012G 460-012 11
⁄4 1.26
460-015G 460-015 11
⁄2 1.35
460-020G 460-020 2 2.24
460-030G 460-030 3 7.59
460-040G 460-040 4 8.74
Insert x IPS Socket Adapter
 Item # White Item # Size Price
474-005G 474-005 1
⁄2 $.81
474-007G 474-007 3
⁄4 .97
474-010G 474-010 1 1.03
474-012G 474-012 11
⁄4 1.63
474-015G 474-015 11
⁄2 1.82
474-020G 474-020 2 3.35
474-030G 474-030 3 10.01
474-040G 474-040 4 11.42
90° Ell (Insert x Fipt)
 Item # Size Price
 1407-005 1
⁄2 $1.42
 1407-007 3
⁄4 1.53
 1407-010 1 1.98
 1407-012 11
⁄4 2.92
 1407-015 11
⁄2 3.34
 1407-020 2 5.65
Blue Monster™ PTFE
Thread Sealant
Use Blue Monster on threads made
from galvanized steel, iron, brass,
copper, aluminmum, stainless steel,
polyethylene, polypropylene, PVC, CPVC,
ABS, fiberglass and more. For a detailed list
of chemicals compatible with Blue Monster,
contact Webb. Mill-Rose Blue Monster tape
has been used at
pressures up to 10,000
PSI and at temperatures
from -450°F to +500°F.
 Size Item # Price
1
⁄2" x 1429" 70885 $3.67 3
⁄4" x 1429" 70886 4.98
1" x 1429" 70887 6.47
INSERT FITTING INSTALLATION
Pipe is cut to length with handsaw or
knife. When installing flexible lines, (a)
snake line one foot or more per 100 lineal
feet, (b) cold water should be run
through lines prior to backfilling to permit
pipe to contract, (c) care should be taken
to prevent large and sharp-edged rocks
from being in position to crush pipe. Insert
fittings are used to join lengths of flexible
pipe. Stainless steel clamps are first
slipped over ends of pipe, fitting is inserted
and steel clamps are tightened securely
over barbs on fittings. DO NOT use oil or
detergent on any fittings. Use plain water
or soapy water as lubricant on fitting. For
attachment to previously installed metallic
systems or threaded fixtures, the insert
adapter is utilized. Apply thread sealant to
the threaded end of adapter and tighten
into female connection. Steel clamp is then
slipped over pipe end and pipe slipped
over serrated end of insert adapter. Steel
clamp is then positioned over serrations
on insert adapter and securely tightened
with a screwdriver.
Dimensions of Polyethylene Pipe –
ASTM D 2104 and D 2239
Spears® Manufacturing Company
Insert Fittings are designed for use
with polyethylene pipe produced
with average inside diameter as
shown in the chart below.
 Nominal Average Tolerance
 Size in. I.D. in. in.
 1
⁄2 .622 +.010 -.010
 3
⁄4 .824 +.010 -.015
 1 1.049 +.010 -.020
 1-1
⁄4 1.380 +.010 -.020
 11
⁄2 1.610 +.015 -.020
 2 2.067 +.015 -.020
 21
⁄2 2.469 +.010 -.025
 3 3.068 +.015 -.030
 4 4.026 +.015 -.035
Standards & Specifications
ASTM D 2609 – Plastic Insert
Fittings for Polyethylene (PE)
Plastic Pipe.
Material – Spears® Insert Fittings
are produced from PVC Type 1,
Cell Classification 12454, CPVC Cell
Classification 23447 or
Polypropylene (PP).
It is the user's responsibility to
determine the suitability for the
intended service application.
 Item # SS Hose Clamp Range Price Item # SS Hose Clamp Range Price
G14006 3
⁄8" – 7
⁄8", 6 SAE $1.49 G14044 21
⁄4" – 31
⁄4, 44 SAE $2.61
G14008 7
⁄16" – 1", 8 SAE 1.86 G14048 1-5
⁄8" – 31
⁄2, 48 SAE 2.87
G14010 1
⁄2" – 11
⁄16", 10 SAE 1.89 G14052 1-7
⁄8" – 33
⁄4, 52 SAE 2.91
G14012 1
⁄2" – 11
⁄4", 12 SAE 1.90 G14056 21
⁄8" – 4", 56 SAE 3.01
G14016 11⁄16" – 11
⁄2", 16 SAE 1.93 G14064 21
⁄8" – 4", 64 SAE 3.06
G14020 3
⁄4" – 13
⁄4", 20 SAE 1.97 G14072 3" – 5" SAE 72 3.13
G14024 1" – 2", 24 SAE 2.01 G14080 31
⁄2" – 51
⁄2" SAE 80 3.39
G14028 11
⁄4" – 21
⁄4", 28 SAE 2.03 G14088 4" – 6" SAE 88 3.79
G14032 11
⁄2" – 21
⁄2", 32 SAE 2.05 G14096 41
⁄2" – 61
⁄2" SAE 96 3.83
G14036 13
⁄4" – 23
⁄4, 36 SAE 2.10 G14104 5" – 7" SAE 104 3.87
G14040 11
⁄8" – 3", 40 SAE 2.34
More Styles and Material Available Call……
IDEAL® 68 Series General Purpose 9
⁄16" Worm Gear
The industry standard, these versatile clamps have a wide range of applications. From simple home
and auto repairs to heavy industrial uses, you can be sure there’s a full size clamp to handle the job.
n All stainless steel
construction especially
suited for industrial
applications.
n Screw: 5
⁄16" hex head,
410 Stainless Steel
n Band: 9
⁄16" band
width, 201/301
Stainless Steel
n Housing: 201/301
Stainless Steel
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 133
133_133 3/30/14 4:18 PM Page 133
Hose, Tubing & Fittings
A
E F PL
Black Polypropylene Cam Lever Couplings 316 Stainless Steel Cam Lever Couplings
FDA Cam Lever Couplings
 3
⁄4" 1" 11
⁄2" 2" 3" Item Description Item # Price Item # Price Item # Price Item # Price Item # Price
 A Male Adapter – Female Thread (FDA) 75AFD $3.76 100AFD $4.44 150AFD $5.27 200AFD $6.34 300AFD $11.90
 B Female Coupler – Male Thread (FDA) 75BFD 8.58 100BFD 9.66 150BFD 11.72 200BFD 13.82 300BFD 23.20
 C Female Coupler – Hose Shank (FDA) 075CFD 8.58 100CFD 9.66 150CFD 11.02 200CFD 13.82 300CFD 23.20
 D Female Coupler – Female Thread (FDA) 075DFD 8.58 100DFD 9.67 150DFD 11.73 200DFD 13.82 300DFD 23.20
 E Male Adapter – Hose Shank (FDA) 075EFD 3.99 100EFD 4.50 150EFD 5.39 200EFD 6.91 300EFD 14.72
 F Male Adapter – Male Thread (FDA) 075FFD 3.99 100FFD 4.50 150FFD 5.39 200FFD 6.91 300FFD 14.72
 PL Plug for Female Coupler (FDA) 075PLFD 3.76 100PLFD 4.50 150PLFD 5.39 200PLFD 6.34 300PLFD 11.90
 CAP Cap for Male Adapter (FDA) 075CAPFD 8.58 100CAPFD 9.60 150CAPFD 11.73 200CAPFD 13.82 300CAPFD 23.20
Quick Spec
n Stainless steel rings, arms and pins.
n Most complete line of polypropylene FDA
couplings avalable.
n Versatile – interchangeable with all types of
cam lever couplers.
n Durable – FDA Polypropylene is glass filled
for rugged strength and durability.
n Precision molded – insures a uniform and
accurate fit.
n Standard with FDA EPDM gaskets.
n Smooth operating – finger rings are
designed for easy opening of cam levers.
n Complete series of 3
⁄4", 1", 11
⁄4", 11
⁄2", 2", 3"
NPT thread.
n Economical and superior in performance.
n Operating conditions:
3
⁄8"-2" – 100 psi @ 0°F, 125 psi @ 70°F,
70 psi @ 150°F;
3" Cap – 50 psi,
Couplings 75 psi max.
WARNING: Couplings should not be disconnected under pressure or with liquid in the line.
Starting At
$
3 76
 *1
⁄2" 3
⁄4" 1" **11
⁄4" x 1" ***11
⁄2" x 11
⁄4" 11
⁄2" 2" 3" 4"
 Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price Item # Price
Black Polypropylene
A (Adapter x FNPT) 75A1/2 $2.96 75A3/4 $2.96 100A $2.96 125A $2.96 150125A $3.33 150A $3.33 200A $3.91 300A $9.48 400A $14.46
B (Coupler x MNPT) 75B1/2 6.72 75B3/4 6.72 100B 7.70 125B 7.70 150125B 9.04 150B 9.04 200B 11.00 300B 18.48 400B 36.60
C (Coupler x Hose Shank) 050C 6.72 075C 6.72 100C 7.70 125C 7.70 150125C 9.04 150C 9.04 200C 11.00 300C 18.48 400C 36.60
D (Coupler x FNPT) 050D 6.72 075D 6.72 100D 7.70 125D 7.70 150125D 9.04 150D 9.04 200D 11.00 300D 18.48 400D 36.60
E (Adapter x Hose Shank) 050E 3.17 075E 3.17 100E 3.51 125E 3.51 150125E 3.53 150E 3.53 200E 4.63 300E 12.15 400E 14.46
F (Adapter x MNPT) 050F 3.17 075F 3.17 100F 3.51 125F 3.51 150125F 3.53 150F 3.53 200F 4.63 300F 12.15 400F 14.46
PL (Adapter Plug) 075PL 3.17 075PL 3.17 100PL 3.06 125PL 3.06 150125PL 3.42 150PL 3.42 200PL 4.59 300PL 9.63 400PL 11.36
CAP (Coupler Cap) 075CAP 6.72 075CAP 6.72 100CAP 7.39 125CAP 7.39 150125CAP 9.04 150CAP 9.04 200CAP 11.00 300CAP 18.48 400CAP 26.68
316 Stainless Steel
A (Adapter x FNPT) – – 075ASS $33.15 100ASS $33.44 – – – – 150ASS $34.08 200ASS $40.03 300ASS $83.69 400ASS $143.84
B (Coupler x MNPT) – – 075BSS 51.35 100BSS 58.51 – – – – 150BSS 71.09 200BSS 83.96 300BSS 158.57 400BSS 215.34
C (Coupler x Hose Shank) – – 075CSS 49.82 100CSS 51.32 – – – – 150CSS 61.75 200CSS 75.62 300CSS 122.06 400CSS 199.37
D (Coupler x FNPT) – – 075DSS 51.88 100DSS 55.89 – – – – 150DSS 71.09 200DSS 78.06 300DSS 159.83 400DSS 216.00
E (Adapter x Hose Shank) – – 075ESS 34.55 100ESS 34.54 – – – – 150ESS 44.08 200ESS 47.13 300ESS 93.78 400ESS 185.90
F (Adapter x MNPT) – – 075FSS 37.81 100FSS 42.55 – – – – 150FSS 54.06 200FSS 58.96 300FSS 116.42 400FSS 185.90
PL (Adapter Plug) – – 075PP/SS 34.54 100PL/SS 36.97 – – – – 150PL/SS 36.69 200PL/SS 42.89 300PL/SS 79.49 400PL/SS 95.19
CAP (Coupler Cap) – – 075CAP/SS 51.35 100CAP/SS 58.47 – – – – 150CAP/SS 66.47 200CAP/SS 64.95 300CAP/SS 95.19 400CAP/SS 151.44
B C D
CAP
*NOTE: 1
⁄4", 3
⁄8" and 1
⁄2" series couplings interchange with 3
⁄4" size couplings. Coupling ends are 3
⁄4" size. **11
⁄4" series couplings interchange with 1" size couplings. Coupling ends are 1" size. ***11
⁄2" x 11
⁄4" couplings
interchange with 11
⁄2" size couplings. Coupling ends are 11
⁄2" size.
ABCDEF PL CAP
Quick Spec
n Tough 316 stainless steel to insure durability.
n Chemical resistant to protect against corrosion.
n Precision-made, investment casting high
quality process to assure
uniformity and proper fit.
n 150 PSI maximum operating pressure.
n Smooth operating to make connections
quickly and easily.
n Standard with Buna “N” gaskets. Viton &
EPDM available.
Quick Spec
n Stainless steel rings, arms & pins
n Precision molded – insures a uniform
and accurate fit.
n Durable – Polypropylene is glass filled
for rugged strength and durability.
n Smooth operating – finger rings are
designed for easy opening of cam levers.
n Operating conditions:
1
⁄2" thru 2" – 100 PSI @ 0°F; 125 PSI
@ 70°F; 70 PSI @ 150°F.
3" & 4" Cap – 50 PSI Couplings 75 PSI max
n Standard with EPDM gaskets. Buna "N",
and Viton also available.
Versatile – interchangeable with all types of cam lever couplings.
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 134
134_134 3/30/14 4:52 PM Page 134
Polypropylene 90° Coupling
 Item # Description Price
HBO25-90 1
⁄4" Male Thread x 1
⁄4" Hose Shank 90 $.78
HBO38-90 3
⁄8" Male Thread x 3
⁄8" Hose Shank 90 .97
HBO50/038-90 1
⁄2" Male Thread x 3
⁄8" Hose Shank 90 .97
HB050-90 1
⁄2" Male Thread x 1
⁄2" Hose Shank 90 .97
HB050/075-90 1
⁄2" Male Thread x 3
⁄4" Hose Shank 90 .97
HB075/050-90 3
⁄4" Male Thread x 1
⁄2" Hose Shank 90 .97
 Item # Description Price Ea.
RN050-038 1
⁄2" x 3
⁄8" Poly Reducer Nipple $1.17
RN075-050 3
⁄4" x 1
⁄2" Poly Reducer Nipple 1.23
RN100-050 1" x 1
⁄2" Poly Reducer Nipple 1.62
RN100-075 1" x 3
⁄4" Poly Reducer Nipple 1.65
RN125-075 11
⁄4" x 3
⁄4" Poly Reducer Nipple 1.74
RN125-100 11
⁄4" x 1" Poly Reducer Nipple 1.79
RN150-100 11
⁄2" x 1" Poly Reducer Nipple 1.82
RN150-125 11
⁄2" x 11
⁄4" Poly Reducer Nipple 1.96
RN200-125 2" x 11
⁄4" Poly Reducer Nipple 2.24
RN200-150 2" x 11
⁄2" Poly Reducer Nipple 2.13
Item # Description Price
SW100 1" Female x 1" Male Poly Swivel $9.36
SW150 11
⁄2" Female x 11
⁄2" Male Poly Swivel 11.47
SW200 2" Female x 2" Male Poly Swivel 12.86
SW220 2" Female x 2" Male Full Port Swivel 21.40
Polypropylene Swivels Polypropylene Hose Barbs
Polypropylene
Reducer Nipple
Polypropylene Nozzle Valves
 Item # Description Price
HBO75 3
⁄4" Male Thread x 3
⁄4" Hose Shank $.81
HBO75-100 3
⁄4" Male Thread x 1" Hose Shank .96
HBO100-075 1" Male Thread x 3
⁄4" Hose Shank .96
HB100 1" Male Thread x 1" Hose Shank .96
HB100-125 1" Male Thread x 11
⁄4" Hose Shank 1.71
HB125-075 11
⁄4" Male Thread x 3
⁄4" Hose Shank 1.71
HB125-100 11
⁄4" Male Thread x 1" Hose Shank 1.71
HB125 11
⁄4" Male Thread x 11
⁄4" Hose Shank 1.71
HB125-150 11
⁄4" Male Thread x 11
⁄2" Hose Shank 2.18
HB150-100 11
⁄2" Male Thread x 1" Hose Shank 1.79
HB150-125 11
⁄2" Male Thread x 11
⁄4" Hose Shank 1.79
HB150 11
⁄2" Male Thread x 11
⁄2" Hose Shank 1.98
HB150-200 11
⁄2" Male Thread x 2" Hose Shank 3.10
HB200-150 2" Male Thread x 11
⁄2" Hose Shank 3.10
HB200 2" Male Thread x 2" Hose Shank 3.10
HB300 3" Male Thread x 3" Hose Shank 8.29
HB400 4" Male Thread x 4" Hose Shank 16.39
Male Thread x Hose Shank
Male Thread
x Hose Shank 90
Quick Spec
n Teflon thrust bearing
n Viton O-rings
n Hex flats
n S.S. drive stud
n Heavy duty
reinforced polypropylene
n 75 P.S.l. maximum Quick Spec
n Precision molded in polypropylene.
n Glass reinforced for stability, strength and toughness.
n Hose barbs are molded specifically to fit properly into hoses.
n Sizes range from 1
⁄4" to 3".
n Combination sizes available for elbows and straight barbs.
n Excellent chemical resistance.
n Pressure to 150 P.S.I. at 70°.
Quick Spec
n Precision molded in polypropylene, reinforced with fiberglass
for strength and durability.
n Stainless steel rings, cam levers and pins resist corrosion.
n Banjo 90° angle couplings and adapters will reduce the
number of elbows and other pipe fittings used in plumbing
applications.
n As with all Banjo couplings, these angle couplers will
interchange with standard cam lever couplings of all types.
Quick Spec
VA150/VA200FP
n Lightweight hose end valve for
convenient transfer of liquids
into drums, tanks, etc. Angled
end flange with 8" long polypropylene fill spout.
VN100
n Glass filled polypropylene.
n Stainless steel handle, spring and pin.
n Viton® rubber parts.
n Padlock capability.
n 75 P.S.I. Maximum.
n 40 G.P.M.
Hose, Tubing & Fittings
WARNING: Locking Cam Arm Lever
is not intended to be used as a security device or to prevent unauthorized opening of coupling assembly.
Locking Cam Lever Poly Couplings
 Item# Description Price
 L150B 11
⁄2" Female Coupler – Male Thread $20.29
 L150C 11
⁄2" Female Coupler – Hose Shank 20.29
 L150D 11
⁄2" Female Coupler – Female Thread 20.29
 L150CAP 11
⁄2" Cap for Male Adapter 20.29
 L200B 2" Female Coupler – Male Thread 22.35
 L200C 2" Female Coupler – Hose Shank 22.35
 L200D 2" Female Coupler – Female Thread 22.35
 L200CAP 2" Cap for Male Adapter 22.35
 200KL Locking Cam Arm w/Ring fits 11
⁄2" & 2" Couplings 7.74
 200PKL Coupling Pin fits 11
⁄2" & 2" Couplings 1.55
Easy
Action
Locking
Lever
Locking Arm
with Ring
Pin
Quick Spec
n All Stainless Steel construction.
n Easy action lever.
n Excellent tor high vibration applications.
 Item # Description Price
150C90 90° Female Coupler 11
⁄2" Hose Shank $11.31
200C90 90° Female Coupler 2" Hose Shank 14.02
150D90 90° Female Coupler 11
⁄2" Female Thread 11.31
200D90 90° Female Coupler 2" Female Thread 14.02
150F90 90° Male Adapter 11
⁄2" Male Thread 6.58
200F90 90° Male Adapter 2" Male Thread 7.06
150A90 90° Male Adapter 11
⁄2" Female Thread 5.40
200A90 90° Male Adapter 2" Female Thread 6.26
150D90 150C90 150F90 150A90
VA200FP
VN100
All Stainless
Bolts!
All Stainless
Bolts!
Item # Pipe Size Opening Female Price Thru Ball NPT Thread
Bolted Valve – Full Port – Viton® with 90° Elbow
VA150 11
⁄2" x 8" 11
⁄2" 11
⁄2" $36.45
Bolted Valve – Full Port – Viton® with 90° Elbow
VA200FP 2" x 8" 21
⁄16" 2" 54.54
Poly Nozzle Valve
VN100 1" – 1" 38.90
Repair Kit
VN10200 – – – 13.13
 Item# Description Price
 VSF200FPAF 2" Male Adapter x 2" ANSI Flange $94.55
 VSMT200FPAF 2" Male Thread x 2" ANSI Flange 94.55
VSF200FPAF
VSMT200FPAF
Quick Spec
n Stainless steel bolts.
n 100% Teflon seats.
n Viton seals.
n Glass-filled polypropylene.
n Unique compact design.
n Lightweight.
n Maximum operating pressure:
100 PSI @ 70°F, 75 PSI @150°F
www.fwwebb.com/plastics
Ansi FIange Ball Valves – 2" Full Port
Patent Pending
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 135
135_133 3/30/14 4:28 PM Page 135
Par Barb Thermoplastic Fit tings
Male Con nec tor
Tubing MPT Black Black White
ID(in) (in) Polyethylene Polypropylene Price Nylon Price
3
⁄16 1
⁄8 P3MCB2 325HB-3-2PP $.55 325HB-3-2N $.63 3
⁄16 1
⁄4 P3MCB4 325HB-3-4PP .59 325HB-3-4N .67 3
⁄16 1
⁄2 P3MCB8 – .88 – 1
⁄4 1
⁄8 P4MCB2 325HB-4-2PP .55 325HB-4-2N .63 1
⁄4 1
⁄4 P4MCB4 325HB-4-4PP .55 325HB-4-4N .63 1
⁄4 3
⁄8 P4MCB6 – .55 325HB-4-6N .63 1
⁄4 1
⁄2 P4MCB8 325HB-4-8PP .88 325HB-4-8N 1.00 1
⁄4 3
⁄4 P4MCB12 – 1.60 325HB-4-12N 1.82 5
⁄16 1
⁄8 P5MCB2 – .88 325HB-5-2N 1.00 5
⁄16 1
⁄4 P5MCB4 – .66 325HB-5-4N .75 5
⁄16 3
⁄8 P5MCB6 325HB-5-6PP .74 325HB-5-6N .85 3
⁄8 1
⁄8 P6MCB2 325HB-6-2PP .55 325HB-6-2N .63 3
⁄8 1
⁄4 P6MCB4 325HB-6-4PP .55 325HB-6-4N .63 3
⁄8 3
⁄8 P6MCB6 325HB-6-6PP .59 325HB-6-6N .67 3
⁄8 1
⁄2 P6MCB8 325HB-6-8PP .88 325HB-6-8N 1.00 3
⁄8 3
⁄4 P6MCB12 325HB-6-12PP 1.05 325HB-6-12N 1.19 1
⁄2 1
⁄4 P8MCB4 325HB-8-4PP .79 325HB-8-4N .90 1
⁄2 3
⁄8 P8MCB6 325HB-8-6PP .79 325HB-8-6N .90 1
⁄2 1
⁄2 P8MCB8 325HB-8-8PP .95 325HB-8-8N 1.08 1
⁄2 3
⁄4 P8MCB12 325HB-8-12PP 1.12 325HB-8-12N 1.27 5
⁄8 3
⁄8 P10MCB6 – .88 325HB-10-6N 1.00 5
⁄8 1
⁄2 P10MCB8 325HB-10-8PP 1.00 325HB-10-8N 1.14 5
⁄8 3
⁄4 P10MCB12 325HB-10-12PP 1.05 325HB-10-12N 1.19 3
⁄4 1
⁄2 P12MCB8 325HB-12-8PP .99 325HB-12-8N 1.13 3
⁄4 3
⁄4 P12MCB12 325HB-12-12PP 1.19 325HB-12-12N 1.35
Male Elbow
Tubing MPT Black Black White
ID(in) (in) Polyethylene Polypropylene Price Nylon Price
3
⁄16 1
⁄8 P3MEB2 329HB-3-2PP $1.18 329HB-3-2N $1.34 3
⁄16 1
⁄4 P3MEB4 – 1.18 329HB-3-4N 1.34 1
⁄4 1
⁄8 P4MEB2 329HB-4-2PP 1.18 329HB-4-2N 1.34 1
⁄4 1
⁄4 P4MEB4 329HB-4-4PP 1.22 329HB-4-4N 1.39 1
⁄4 3
⁄8 P4MEB6 329HB-4-6PP 1.46 329HB-4-6N 1.66 1
⁄4 1
⁄2 P4MEB8 329HB-4-8PP 1.51 329HB-4-8N 1.72 1
⁄4 3
⁄4 P4MEB12 – 2.14 – 3
⁄8 1
⁄8 P6MEB2 329HB-6-2PP 1.18 329HB-6-2N 1.34 3
⁄8 1
⁄4 P6MEB4 329HB-6-4PP 1.12 329HB-6-4N 1.27 3
⁄8 3
⁄8 P6MEB6 329HB-6-6PP 1.46 329HB-6-6N 1.66 3
⁄8 1
⁄2 P6MEB8 329HB-6-8PP 1.51 329HB-6-8N 1.72 3
⁄8 3
⁄4 P6MEB12 – 1.65 – 1
⁄2 1
⁄4 P8MEB4 329HB-8-4PP 1.54 329HB-8-4N 1.75 1
⁄2 3
⁄8 P8MEB6 329HB-8-6PP 1.41 329HB-8-6N 1.60 1
⁄2 1
⁄2 P8MEB8 329HB-8-8PP 1.51 329HB-8-8N 1.72 1
⁄2 3
⁄4 P8MEB12 329HB-8-12PP 1.65 329HB-8-12N 1.88 5
⁄8 3
⁄8 P10MEB6 – 1.51 329HB-10-6N 1.72 5
⁄8 1
⁄2 P10MEB8 329HB-10-8PP 1.59 329HB-10-8N 1.81 5
⁄8 3
⁄4 P10MEB12 329HB-10-12PP 1.82 329HB-10-12N 2.07 3
⁄4 1
⁄2 P12MEB8 329HB-12-8PP 1.59 329HB-12-8N 1.81
Tee Union
Tubing In side Dia. Black Black White
 #1 #2 #3 PE PP Price Nylon Price
 1
⁄8 1
⁄8 1
⁄8 P2TUB2 – $1.12 364HBM-2N $1.27
 3
⁄16 3
⁄16 3
⁄16 P3TUB3 364HB-3PP 1.12 364HB-3N 1.27
 1
⁄4 1
⁄4 1
⁄4 P4TUB4 364HB-4PP 1.18 364HB-4N 1.34
 5
⁄16 5
⁄16 5
⁄16 P5TUB5 364HB-5PP 1.23 364HB-5N 1.40
 3
⁄8 3
⁄8 1
⁄4 P6TUB4 364HB-6-4PP 1.23 364HB-6-4N 1.40
 3
⁄8 3
⁄8 3
⁄8 P6TUB6 364HB-6PP 1.23 364HB-6N 1.40
 3
⁄8 3
⁄8 1
⁄2 P6TUB8 364HB-6-8PP 1.23 364HB-6-8N 1.40
 1
⁄2 1
⁄2 3
⁄8 P8TUB6 364HB-8-6PP 1.23 364HB-8-6N 1.40
 1
⁄2 1
⁄2 1
⁄2 P8TUB8 364HB-8PP 1.41 364HB-8N 1.60
 5
⁄8 5
⁄8 5
⁄8 P10TUB10 364HB-10PP 1.41 364HB-10N 1.60
Elbow Union
 ID (in) Black Black Price White Price Polyethylene Polypropylene Nylon
 1
⁄4 - 1
⁄4 P4EUB4 365HB-4PP $1.12 365HB-4N $1.27
 3
⁄8 - 3
⁄8 P6EUB6 365HB-6PP 1.18 365HB-6N 1.34
 1
⁄2 - 1
⁄4 P8EUB4 365HB-8-4PP 1.18 365HB-8-4N 1.34
 1
⁄2 - 3
⁄8 P8EUB6 365HB-8-6PP 2.00 365HB-8-6N 2.27
 1
⁄2 - 1
⁄2 P8EUB8 365HB-8PP 1.22 365HB-8N 1.39
 5
⁄8 - 5
⁄8 P10EUB10 365HB-10PP 1.30 365HB-10N 1.48
 3
⁄4 - 3
⁄4 P12EUB12 365HB-12PP 2.66 365HB-12N 3.02
HPN – Hex Pipe Nipple
Side 1 Side 2 Black Black Price White Price PE PP Nylon
 1
⁄8 1
⁄8 P2HPN2 316P-2PP $.48 316P-2N $.55
 1
⁄4 1
⁄8 P4HPN2 316P-4-2PP .48 316P-4-2N .55
 1
⁄4 1
⁄4 P4HPN4 316P-4PP .48 316P-4N .55
 3
⁄8 1
⁄8 P6HPN2 316P-6-2PP .54 316P-6-2N .61
 3
⁄8 1
⁄4 P6HPN4 316P-6-4PP .56 316P-6-4N .64
 3
⁄8 3
⁄8 P6HPN6 316P-6PP .56 316P-6N .64
 1
⁄2 1
⁄8 P8HPN2 316P-8-2PP .61 316P-8-2N .69
 1
⁄2 1
⁄4 P8HPN4 316P-8-4PP .61 316P-8-4N .69
 1
⁄2 3
⁄8 P8HPN6 316P-8-6PP .64 316P-8-6N .73
 1
⁄2 1
⁄2 P8HPN8 316P-8PP .68 316P-8N .77
 3
⁄4 3
⁄8 P12HPN6 316P-12-6PP .68 316P-12-6N .77
 3
⁄4 1
⁄2 P12HPN8 316P-12-8PP .89 316P-12-8N 1.01
 3
⁄4 3
⁄4 P12HPN12 316P-12PP .92 316P-12N 1.05
Male Tee Branch
 ID NTPF Pipe Black Black Price White Price Thread Size PE PP Nylon
 3
⁄16 1
⁄8 P3MTB2 – $1.75 372HP-3-2N $1.99
 3
⁄16 1
⁄4 P3MTB4 – 2.00 372HP-3-4N 2.27
 1
⁄4 1
⁄8 P4MTB2 372HP-4-2PP 1.22 372HP-4-2N 1.39
 1
⁄4 1
⁄4 P4MTB4 372HP-4-4PP 1.22 372HP-4-4N 1.39
 1
⁄4 3
⁄8 P4MTB6 372HP-4-6PP 2.08 372HP-4-6N 2.36
 3
⁄8 1
⁄4 P6MTB4 372HP-6-4PP 1.30 372HP-6-4N 1.48
 3
⁄8 3
⁄8 P6MTB6 372HP-6-6PP 1.59 372HP-6-6N 1.81
 3
⁄8 1
⁄2 P6MTB8 372HP-6-8PP 1.46 372HP-6-8N 1.66
 1
⁄2 1
⁄4 P8MTB4 372HP-8-4PP 1.35 372HP-8-4N 1.53
 1
⁄2 3
⁄8 P8MTB6 372HP-8-6PP 1.41 372HP-8-6N 1.60
 1
⁄2 1
⁄2 P8MTB8 372HP-8-8PP 1.58 372HP-8-8N 1.80
Union Connector
Tubing ID Black Black Price White Price Both Ends (in) PE PP Nylon
 1
⁄8 P2UCB2 322HB-2PP $.74 322HB-2N $.84
 3
⁄16 P3UCB3 322HB-3PP .74 322HB-3N .84
 1
⁄4 P4UCB4 322HB-4PP .74 322HB-4N .84
 5
⁄16 P5UCB5 322HB-5PP .85 322HB-5N .97
 3
⁄8 P6UCB6 322HB-6PP .79 322HB-6N .90
 1
⁄2 P8UCB8 322HB-8PP .79 322HB-8N .90
 5
⁄8 P10UCB10 322HB-10PP .82 322HB-10N .93
 3
⁄4 P12UCB12 322HB-12PP 1.02 322HB-12N 1.16
HPL – Hex Head Pipe Plug
 Side 1 Black Black Price White Price Polyethylene Polypropylene Nylon
 1
⁄8 P2HPL 318P-2PP $.22 318P-2N $.25
 1
⁄4 P4HPL 318P-4PP .22 318P-4N .25
 3
⁄8 P6HPL 318P-6PP .30 318P-6N .34
 1
⁄2 P8HPL 318P-8PP .37 318P-8N .42
 3
⁄4 P12HPL 318P-12PP .56 318P-12N .64
Reducer Bushing
Outside Inside Black Price White Price Pipe Thrd Pipe Thrd Polypropylene Nylon 1
⁄4 1
⁄8 309P-4-2PP $1.61 309P-4-2N $1.83 3
⁄8 1
⁄8 309P-6-2PP 1.73 309P-6-2N 1.97 3
⁄8 1
⁄4 309P-6-4PP 1.75 309P-6-4N 1.99 1
⁄2 1
⁄8 309P-8-2PP 1.89 309P-8-2N 2.15 1
⁄2 1
⁄4 309P-8-4PP 1.91 309P-8-4N 2.17 1
⁄2 3
⁄8 309P-8-6PP 2.03 309P-8-6N 2.29
Union Y
Tube ID Tube ID White Price 1 & 2 3 Nylon 1
⁄4 1
⁄4 362HB-4N $1.61 3
⁄8 3
⁄8 362HB-6N 1.73 1
⁄2 1
⁄2 362HB-8N 2.03
Female Elbow
Tube I.D. N.P.T. Black Price White Price Polypropylene Nylon
1
⁄4 1
⁄8 370HB-4-2PP $1.86 370HB-4-2N $2.11 1
⁄4 1
⁄4 370HB-4-4PP 1.91 370HB-4-4N 2.17 1
⁄4 3
⁄8 370HB-4-6PP 1.95 370HB-4-6N 2.22 1
⁄4 1
⁄2 370HB-4-8PP 1.97 370HB-4-8N 2.24 3
⁄8 1
⁄8 370HB-6-2PP 2.07 370HB-6-2N 2.35 3
⁄8 1
⁄4 370HB-6-4PP 2.04 370HB-6-4N 2.32 3
⁄8 3
⁄8 370HB-6-6PP 2.05 370HB-6-6N 2.33 3
⁄8 1
⁄2 370HB-6-8PP 2.09 370HB-6-8N 2.38 1
⁄2 1
⁄2 370HB-8-8PP 2.18 370HB-8-8N 2.48
Female Connector
Tube I.D. N.P.T. Black Price White Price Polypropylene Nylon
3
⁄16 1
⁄8 326HB-3-2PP $1.85 326HB-3-2N $2.10 1
⁄4 1
⁄8 326HB-4-2PP 1.81 326HB-4-2N 2.06 1
⁄4 1
⁄4 326HB-4-4PP 1.84 326HB-4-4N 2.09 3
⁄8 3
⁄8 326HB-6-6PP 1.91 326HB-6-6N 2.17 1
⁄2 1
⁄2 326HB-8-8PP 1.99 326HB-8-8N 2.26 5
⁄8 1
⁄2 326HB-10-8PP 2.14 326HB-10-8N 2.43 3
⁄4 1
⁄2 326HB-12-8PP 2.60 326HB-12-8N 2.95
n Par-Barb fittings are widely used with Parflex clear vinyl & urethane tubing and a variety of rubber tubing and hose.
n Fittings meet FDA and NSF-51 specifications for food contact.
n Black Polyethylene: -65°F to +190°F, Black Polypropylene: 10°F to +220°F, White Nylon: -40°F to +200°F
Hose, Tubing & Fittings
#1
#2 #3
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 136
136_136 3/30/14 4:30 PM Page 136
Hose, Tubing & Fittings
VME – Valve Male Elbow
(T/S Tube Connection to Male NPT)
 Nom. Tube NPTM ØE Min
 Item # O.D. Thread Size Thru Hole Price
PP4VME4-MG 1
⁄4 1
⁄4 .19 $5.75
PP4VME6-MG 1
⁄4 3
⁄8 .19 5.75
PP6VME4-MG 3
⁄8 1
⁄4 .25 5.75
PP6VME6-MG 3
⁄8 3
⁄8 .25 5.75
VFE – Valve Female Elbow
(T/S Tube Connection to Female NPTF)
 Nom. Tube NPTF ØE Min
 Item # O.D. Thread Size Thru Hole Price
PP4VFE4-MG 1
⁄4 1
⁄4 .19 $5.75
PP4VFE6-MG 1
⁄4 3
⁄8 .19 5.75
PP6VFE4-MG 3
⁄8 1
⁄4 .25 5.75
PP6VFE6-MG 3
⁄8 3
⁄8 .25 5.75
VFC – Valve Female Connector
 Nom. Tube NPTF ØE Min
 Item # O.D. Thread Size Thru Hole Price
PP4VFC4-MG 1
⁄4 1
⁄4 .19 $5.58
PP4VFC6-MG 1
⁄4 3
⁄8 .19 5.58
PP6VFC4-MG 3
⁄8 1
⁄4 .25 5.58
PP6VFC6-MG 3
⁄8 3
⁄8 .25 5.58
VEU – Valve Elbow Union 90°
 Nom. Tube Nom. Tube ØE Min
 Item # O.D. O.D. Thru Hole Price
PP4VEU4-MG 1
⁄4 1
⁄4 .19 $5.75
PP4VEU6-MG 1
⁄4 3
⁄8 .19 5.75
PP6VEU4-MG 3
⁄8 1
⁄4 .25 5.75
PP6VEU6-MG 3
⁄8 3
⁄8 .25 5.75
VC – Check Valve Acetal With EPDM O-Ring
 Item # Tube Size Price
 A4VC4-MG 1
⁄4 $8.13
 A5VC5-MG 5
⁄16 8.29
 A6VC6-MG 3
⁄8 9.22
VTEU – Valve Tube Elbow Union
 Item # Tube O.D. Stem Price
 PP4VTEU6-MG 1
⁄4 3
⁄8 $6.87
 PP6VTEU6-MG 3
⁄8 3
⁄8 9.29
 Item # Tubing I.D. Thread NPTF Price
LFPP4VUCPB4 1
⁄4 1
⁄4 $6.17
LFPP6VUCPB6 3
⁄8 3
⁄8 6.17
PBPP4VUC4 1
⁄4 – 6.17
PBPP6VUC6 3
⁄8 – 6.17
PBPP8VUC8 1
⁄2 – 6.17
PBPP4VFE4 1
⁄4 1
⁄4 6.17
PBPP6VFE4 3
⁄8 1
⁄4 6.17
PBPP6VFE6 3
⁄8 3
⁄8 6.17
PBPP4VME4 1
⁄4 1
⁄4 6.17
PBPP6VME6 3
⁄8 3
⁄8 6.17
PBPP4VFC4 1
⁄4 1
⁄4 6.17
PBPP6VFC6 3
⁄8 3
⁄8 6.17
PBPP4VMC4 1
⁄4 1
⁄4 6.17
PBPP6VMC6 3
⁄8 3
⁄8 6.17
VMC – Valve Male Connector
 Nom. Tube NPTM ØE Min
 Item # O.D. Thread Size Thru Hole Price
PP4VMC4-MG 1
⁄4 1
⁄4 .19 $5.58
PP4VMC6-MG 1
⁄4 3
⁄8 .19 5.58
PP6VMC4-MG 3
⁄8 1
⁄4 .25 5.58
PP6VMC6-MG 3
⁄8 3
⁄8 .25 5.58
VUC – Valve Union Connector Straight
(T/S Tube Connection to T/S Tube Connection)
 Tube Tube ØE Min
 Item # Size Size Thru Hole Price
PP4VUC4-MG 1
⁄4 1
⁄4 .19 $5.58
PP4VUC6-MG 1
⁄4 3
⁄8 .19 5.58
PP6VUC4-MG 3
⁄8 1
⁄4 .19 5.58
PP6VUC6-MG 3
⁄8 3
⁄8 .25 5.58
TrueSeal™ Tubing Polypropylene Ball Valves
Parker’s Polypropylene Ball Valves outperform and outlast conventional plug valves. Our “True” ball
valve design incorporates tough, all-plastic construction that provides bi-directional, full-flow capabilities.
In addition, our specially engineered O-ring offers a reliable leak-free seal for years of service.
SPECIFICATIONS
n Temperature range: 0° F - 225° F
n Pressure rating: 150 psi with a 600 psi burst pressure
n O-ring seal material: Nitrile
n NPTF threads
Water conditioning,
pneumatic, laboratory,
chemical process,
beverage dispensing
NSF 51 LISTED
Par-Barb® Polypropylene Ball Valves
Innovative solutions for laboratory
water, beverage and agriculture
markets. Parker’s corrosion-resistent,
lead-free, all plastic design makes them ideal for water filtration
units, coffee and beverage machines and a wide variety
of other fluid applications.
FEATURES
n Full-flow self-cleaning ball limits scale build up inside valve
n Corrosion-resistant, lead-free, all plastic design
n LIQUIfit to barb valve connects tube to hose
n Additional configurations available
n NSF 51 listed
VFC
VME
VUC
VUCPB
VMC
VFE
LIQUIfit™ VAS Angled Stop Valve
The 1
⁄2" angle stop valve comes with an adapter and can be converted to either 1
⁄2" IPS or 3
⁄8" compression plumbing systems.
FEATURES
n Full flow design reduces pressure drop across the valve
n Valve body rotates for easy tube routing
n Removable clip for changing the handle orientation
n 3
⁄8" female compression x 1
⁄2" male NPSM adapter for connecting to 1
⁄2" IPS lines
Part No. Tube O.D. Male Thread Female Thread Price
LFPP4VAS6 1
⁄4 3
⁄8 Compression 3
⁄8 Compression $6.86
LFPP6VAS6 3
⁄8 3
⁄8 Compression 3
⁄8 Compression 10.20
LFPP4VAS8* 1
⁄4 3
⁄8 Compression 1
⁄2 NPSM 7.38
LFPP6VAS8* 3
⁄8 3
⁄8 Compression 1
⁄2 NPSM 10.37
* Part number includes adapter U8TVA6
NEW
NEW
NEW NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 137
137_137 3/30/14 4:31 PM Page 137
Hose, Tubing & Fittings
n Automatic latching:
to connect coupling,
slide plug into socket,
feel the latch engage.
Click indicates connection
is secure.
n One-hand disconnect: depress thumb latch, separate halves
n Shrouded latch prevents accidental disconnects
Patented HFC & FFC Series polysulfone couplings are able to
withstand demanding applications. They can operate in harsh
environments in temperatures from -40°F to 280°F (-40°C to
138°C) and pressures from vacuum to 125 psi (8.6 bar). The
HFC design offers a unique valve design for high flow and low
spillage while the FFC Series has an open bore for increased flow.
HFC/FFC Series – 1
⁄2" Flow
Polysulfone Couplings
 Flow Temperature Working Max Flow
Series Size Material O-Ring Range Pressure 8 psi/GP
HFC12 3
⁄8" Polypropylene EPDM 32°F to 160°F 60psi 11
HFC57 3
⁄8" Polysulfone EPDM -40°F to 280°F 125psi 11
FFC35 1
⁄2" Polysulfone BUNA -40°F to 280°F 125psi 23
Coupling: Polypropylene
Thumb Latch: Polypropylene
Panel Mount Material:
Polypropylene
O-Ring: EPDM, others available
Panel Mount Gasket: EPDM,
others available
Color: Light Gray with
Charcoal Gray Latch
Spring: 316 Stainless Steel
MATERIALS
HFC12 Series couplings incorporate full 3
⁄8" flow with chemically
 resistant polypropylene for handling harsh chemicals. Available
in a wide range of configurations. For use in scientific equipment,
chemical systems, drum unloading, agriculture and water transfer.
HFC12 Series – 3
⁄8" Flow
Polypropylene Couplings
HFC57 Series – 3
⁄8" Flow
Polysulfone Couplings Quick Disconnect Couplings
Male Thread Socket
Item # Style Thread Size Price
FFC10835 Straight Thru 1
⁄2" NPT $13.20
FFC101235 Straight Thru 3
⁄4" NPT 13.45
FFC101235GHT Straight Thru 3
⁄4" Garden Hose13.45
Note: Metric Sizes available in 1
⁄2" and 3
⁄4" BSPT
In-Line Hose Barb Socket
Item # Style Tubing Size Price
FFC171235 Straight Thru 3
⁄4" ID (19.1 mm) $13.85
Female Thread Socket
Item # Style Thread Size Price
FFC191235GHT Straight Thru 3
⁄4" Garden Hose $15.12
Note: Metric size available in 3
⁄4" BSPP
Bulkhead Panel Mount Hose Barb Socket
Item # Style Tubing Size Price
FFC161235 Straight Thru 3
⁄4" ID (19.1 mm) $17.21
Female Thread Plug
Item # Style Thread Size Price
FCC261235GHT Straight Thru 3
⁄4" Garden Hose $9.69
Note: Metric size available in 3
⁄4" BSPP
In-Line Hose Barb Plug
Item # Style Tubing Size Price
FFC221235 Straight Thru 3
⁄4" ID (19.1 mm) $7.03
Male Thread Plug
Item # Style Thread Size Price
FFC24835 Straight Thru 1
⁄2" NPT $7.81
FFC241235 Straight Thru 3
⁄4" NPT 7.94
FCC241235GHT Straight Thru 3
⁄4" Garden Hose 7.94
Note: Metric Sizes available in 1
⁄2" and 3
⁄4" BSPT
Male Thread Socket
Item # Style Thread Size Price
HFC10635 Straight Thru 3
⁄8" NPT $12.94
HFCD10635 Shutoff 3
⁄8" NPT 16.21
HFC10835 Straight Thru 1
⁄2" NPT 12.94
HFCD10835 Shutoff 1
⁄2" NPT 16.21
HFCD101235 Straight Thru 3
⁄4" NPT 16.52
HFC101235 Shutoff 3
⁄4" NPT 17.41
HFC101235GHT Straight Thru 3
⁄4" Garden Hose 12.94
HFCD101235GHT Shutoff 3
⁄4" Garden Hose 16.21
Note: Metric Sizes available in 3
⁄8", 1
⁄2" and 3
⁄4" BSPT
Bulkhead Panel Mount Hose Barb Socket
Item # Style Tubing Size Price
HFC16635 Straight Thru 3
⁄8" ID (9.5 mm) $16.59
HFCD16635 Shutoff 3
⁄8" ID (9.5 mm) 20.59
HFC16835 Straight Thru 1
⁄2" ID (12.7 mm) 16.59
HFCD16835 Shutoff 1
⁄2" ID (12.7 mm) 20.59
HFC161235 Straight Thru 3
⁄4" ID (19.1 mm) 16.88
HFCD161235 Shutoff 3
⁄4" ID (19.1 mm) 20.95
Female Thread Socket
Item # Style Thread Size Price
HFC191235GHT Straight Thru 3
⁄4" Garden Hose $16.32
HFCD191235GHT Shutoff 3
⁄4" Garden Hose 18.04
Note: Metric size available in 3
⁄4" BSPP
In-Line Hose Barb Socket
Item # Style Tubing Size Price
HFC17635 Straight Thru 3
⁄8" ID (9.5 mm) $13.32
HFCD17635 Shutoff 3
⁄8" ID (9.5 mm) 16.10
HFC17835 Straight Thru 1
⁄2" ID (12.7 mm) 13.32
HFCD17835 Shutoff 1
⁄2" ID (12.7 mm) 16.11
HFC171235 Straight Thru 3
⁄4" ID (19.1 mm) 13.59
HFCD171235 Shutoff 3
⁄4" ID (19.1 mm) 16.44
Male Thread Plug
Item # Style Thread Size Price
HFC24635 Straight Thru 3
⁄8" NPT $7.63
HFCD24635 Shutoff 3
⁄8" NPT 12.37
HFC24835 Straight Thru 1
⁄2" NPT 7.63
HFCD24835 Shutoff 1
⁄2" NPT 12.37
HFC241235 Straight Thru 3
⁄4" NPT 7.81
HFCD241235 Shutoff 3
⁄4" NPT 12.63
HFC241235 Straight Thru 3
⁄4" Garden Hose 7.63
HFCD241235GHT Shutoff 3
⁄4" Garden Hose 12.38
Note: Metric Sizes available in 3
⁄8", 1
⁄2" and 3
⁄4" BSPT
In-Line Hose Barb Plug
Item # Style Tubing Size Price
HFC22635 Straight Thru 3
⁄8" ID (9.5 mm) $6.52
HFCD22635 Shutoff 3
⁄8" ID (9.5 mm) 11.31
HFC22835 Straight Thru 1
⁄2" ID (12.7 mm) 6.51
HFCD22835 Shutoff 1
⁄2" ID (12.7 mm) 11.31
HFC221235 Straight Thru 3
⁄4" ID (19.1 mm) 6.64
HFCD221235 Shutoff 3
⁄4" ID (19.1 mm) 11.46
Elbow Hose Barb Plug
Item # Style Tubing Size Price
HFC23635 Straight Thru 3
⁄8" ID (9.5 mm) $8.09
HFCD23635 Shutoff 3
⁄8" ID (9.5 mm) 14.12
HFC23835 Straight Thru 1
⁄2"ID (12.7 mm 8.09
HFCD23835 Shutoff 1
⁄2" ID (12.7 mm) 14.12
Female Thread Plug
Item # Style Thread Size Price
HFC261235GHT Straight Thru 3
⁄4" Garden Hose $9.53
HFCD261235GHT Shutoff 3
⁄4" Garden Hose 14.26
Note: Metric size available in 3
⁄4" BSPP
Male Thread Socket
Item # Style Thread Size Price
HFC10612 Straight Thru 3
⁄8" NPT $9.66
HFCD10612 Shutoff 3
⁄8" NPT 12.16
HFC10812 Straight Thru 1
⁄2" NPT 9.66
HFCD10812 Shutoff 1
⁄2" NPT 12.16
HFC101212 Straight Thru 3
⁄4" NPT 9.86
HFCD101212 Shutoff 3
⁄4" NPT 12.39
Bulkhead Panel Mount Hose Barb Socket
Item # Style Tubing Size Price
HFC16612 Straight Thru 3
⁄8" ID (9.5 mm) $14.12
HFCD16612 Shutoff 3
⁄8" ID (9.5 mm) 11.43
HFC16812 Straight Thru 1
⁄2" ID (12.7 mm) 14.12
HFCD16812 Shutoff 1
⁄2" ID (12.7 mm) 16.43
HFC161012 Straight Thru 5
⁄8" ID (15.8 mm) 14.40
HFCD161212 Shutoff 5
⁄8" ID (15.8 mm) 16.76
HFC161212 Straight Thru 3
⁄4" ID (19.1 mm) 14.40
HFCD161212 Shutoff 3
⁄4" ID (19.1 mm) 16.76
Elbow Hose Barb Plug
Item # Style Tubing Size Price
HFC23612 Straight Thru 3
⁄8" ID (9.5 mm) $7.38
HFCD23612 Shutoff 3
⁄8" ID (9.5 mm) 11.25
HFC23812 Straight Thru 1
⁄2" ID (12.7 mm) 7.38
HFCD23812 Shutoff 1
⁄2" ID (12.7 mm) 11.25
Male Thread Plug
Item # Style Thread Size Price
HFC24612 Straight Thru 3
⁄8" NPT $4.79
HFCD24612 Shutoff 3
⁄8" NPT 9.86
HFC24812 Straight Thru 1
⁄2" NPT 4.79
HFCD24812 Shutoff 1
⁄2" NPT 9.86
HFC241212 Straight Thru 3
⁄4" NPT 4.89
HFCD241212 Shutoff 3
⁄4" NPT 10.07
In-Line Hose Barb Plug
Item # Style Tubing Size Price
HFC22612 Straight Thru 3
⁄8" ID (9.5 mm) $4.48
HFCD22612 Shutoff 3
⁄8" ID (9.5 mm) 9.77
HFC22812 Straight Thru 1
⁄2" ID (12.7 mm) 4.48
HFCD22812 Shutoff 1
⁄2" ID (12.7 mm) 9.77
HFC221012 Straight Thru 5
⁄8" ID (15.8 mm) 4.40
HFCD221012 Shutoff 5
⁄8" ID (15.8 mm) 10.07
HFC221212 Straight Thru 3
⁄4" ID (19.1 mm) 4.40
HFCD221212 Shutoff 3
⁄4" ID (19.1 mm) 10.07
In-Line Hose Barb Socket
Item # Style Tubing Size Price
HFC17612 Straight Thru 3
⁄8" ID (9.5 mm) $10.52
HFCD17612 Shutoff 3
⁄8" ID (9.5 mm) 12.79
HFC17812 Straight Thru 1
⁄2" ID (12.7 mm) 10.52
HFCD17812 Shutoff 1
⁄2" ID (12.7 mm) 12.96
HFC171012 Straight Thru 5
⁄8" ID (15.8 mm) 10.68
HFCD171212 Shutoff 5
⁄8" ID (15.8 mm) 13.08
HFC171212 Straight Thru 3
⁄4" ID (19.1 mm) 10.68
HFCD171212 Shutoff 3
⁄4" ID (19.1 mm) 13.07
Plug
Socket
HFC57 SERIES (left)
Tubing Range: 3
⁄8" to 3
⁄4"
 (9.5mm to 19.0mm)
Feature: High flow family of
 couplings
FFC35 SERIES (below)
Tubing Range: 3
⁄4" (19.0mm)
Feature: Unobstructed flow
 path (no valves)
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 138
138_138 3/30/14 4:33 PM Page 138
EPDM
D Seal
Stainless steel
gripping ring
Release Retainer
button
Engineered
polymer
Bio-based
material
NPTF thread
Pre-applied tape
available
Hose, Tubing & Fittings
6505 Male Connector -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
65055611WP2 1
⁄4 1
⁄8 $1.06
65055614WP2 1
⁄4 1
⁄4 1.22
65056014WP2 3
⁄8 1
⁄4 1.85
65056018WP2 3
⁄8 3
⁄8 2.12
65056218WP2 1
⁄2 3
⁄8 3.07
65056222WP2 1
⁄2 1
⁄2 3.17
6521 Stem Adapter -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
65215611WP2 1
⁄4 1
⁄8 $2.98
65215614WP2 1
⁄4 1
⁄4 3.27
65215618WP2 1
⁄4 3
⁄8 3.60
65216014WP2 3
⁄8 1
⁄4 3.63
65216018WP2 3
⁄8 3
⁄8 3.56
65216218WP2 1
⁄2 3
⁄8 4.19
65216222WP2 1
⁄2 1
⁄2 4.00
6509 Swivel Elbow -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
65095611WP2 1
⁄4 1
⁄8 $3.43
65095614WP2 1
⁄4 1
⁄4 3.44
65095618WP2 1
⁄4 3
⁄8 3.81
65096014WP2 3
⁄8 1
⁄4 4.85
65096018WP2 3
⁄8 3
⁄8 5.02
65096218WP2 1
⁄2 3
⁄8 6.50
65096222WP2 1
⁄2 1
⁄2 6.50
6508 Swivel Branch Tee -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
65085611WP2 1
⁄4 1
⁄8 $4.05
65085614WP2 1
⁄4 1
⁄4 4.05
65085618WP2 1
⁄4 3
⁄8 4.40
65086014WP2 3
⁄8 1
⁄4 4.97
65086018WP2 3
⁄8 3
⁄8 5.22
65086218WP2 1
⁄2 3
⁄8 6.74
65086222WP2 1
⁄2 1
⁄2 6.74
6503 Swivel Male Run Tee -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
65035611WP2 1
⁄4 1
⁄8 $4.05
65035614WP2 1
⁄4 1
⁄4 4.05
65035618WP2 1
⁄4 3
⁄8 4.40
65036014WP2 3
⁄8 1
⁄4 4.95
65036018WP2 3
⁄8 3
⁄8 5.22
65036218WP2 1
⁄2 3
⁄8 6.77
65036222WP2 1
⁄2 1
⁄2 6.77
6548 Male Y Connector -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
65485611WP2 1
⁄4 1
⁄8 $4.52
65485614WP2 1
⁄4 1
⁄4 4.52
65485618WP2 1
⁄4 3
⁄8 4.69
65486014WP2 3
⁄8 1
⁄4 5.01
65486018WP2 3
⁄8 3
⁄8 6.65
65486218WP2 1
⁄2 3
⁄8 6.73
65486222WP2 1
⁄2 1
⁄2 6.73
6579 Fixed Elbow -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
65795611WP2 1
⁄4 1
⁄8 $1.06
65795614WP2 1
⁄4 1
⁄4 1.91
65795618WP2 1
⁄4 3
⁄8 2.28
65796014WP2 3
⁄8 1
⁄4 2.53
65796018WP2 3
⁄8 3
⁄8 2.57
6306 Union Connector
 Tube 1 Tube 2
 Item # O.D. (in.) O.D. (in.) Price
63065600WP2 1
⁄4 $1.59
63065660WP2 1
⁄4 3
⁄8 2.13
63065608WP2 1
⁄4 5
⁄16 2.50
63060800WP2 5
⁄16 2.50
63066008WP2 5
⁄16 3
⁄8 2.79
63066062WP2 3
⁄8 1
⁄2 2.93
63066200WP2 1
⁄2 2.48
6304 Union Tee
 Tube 1 Tube 2
 Item # O.D. (in.) O.D. (in.) Price
63045600WP2 1
⁄4 $2.30
63046000WP2 3
⁄8 2.85
63046056WP2 3
⁄8 1
⁄4 3.64
63040800WP2 5
⁄16 3.79
63046200WP2 1
⁄2 3.44
6302 Union Elbow
 Tube 1 Tube 2
 Item # O.D. (in.) O.D. (in.) Price
63025600WP2 1
⁄4 $1.80
63020862WP2 5
⁄16 2.38
63026000WP2 3
⁄8 2.73
63025660WP2 3
⁄8 1
⁄4 2.82
63026062WP2 3
⁄8 1
⁄2 3.13
63026200WP2 1
⁄2 3.23
6316 Bulkhead Union
 Tube
 Item # O.D. (in.) Price
63165600WP2 1
⁄4 $3.02
63166000WP2 3
⁄8 3.95
63166200WP2 1
⁄2 5.15
6340 Union Y Connector
 Tube
 Item # O.D. (in.) Price
63405600WP2 1
⁄4 $2.56
63406000WP2 3
⁄8 2.90
63400800WP2 5
⁄16 3.60
63406200WP2 1
⁄2 3.09
6315 Female Connector -
NPTF Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
63155614WP2 1
⁄4 1
⁄4 $2.62
63156018WP2 3
⁄8 3
⁄8 3.02
6366 Reducer
 Tube Stem
 Item # O.D. (in.) (in.) Price
63665608WP2 1
⁄4 5
⁄16 $1.51
63665660WP2 1
⁄4 3
⁄8 1.76
63666062WP2 3
⁄8 1
⁄2 3.32
6382 Plug-in Elbow
 Tube Stem
 Item # O.D. (in.) (in.) Price
63825600WP2 1
⁄4 1
⁄4 $1.64
63825660WP2 3
⁄8 1
⁄4 2.77
63826000WP2 3
⁄8 3
⁄8 3.44
63826200WP2 1
⁄2 1
⁄2 3.32
6322 Tube to Hose Stem
 Tube Hose
 Item # O.D. (in.)Stem (in.) Price
63225656WP2 1
⁄4 1
⁄4 $1.01
63226056WP2 3
⁄8 1
⁄4 1.39
63226008WP2 3
⁄8 5
⁄16 1.47
63226060WP2 3
⁄8 3
⁄8 1.59
63226260WP2 1
⁄2 3
⁄8 1.71
6383 Plug-in Male Run Tee
 Tube Stem
 Item # O.D. (in.) (in.) Price
63835600WP2 1
⁄4 1
⁄4 $2.77
63836000WP2 3
⁄8 3
⁄8 3.42
63836200WP2 1
⁄2 1
⁄2 2.91
6326 Plug
 Stem
 Item # (in.) Price
63265600WP2 1
⁄4 $.46
63266000WP2 3
⁄8 .72
63266200WP2 1
⁄2 1.09
6388 Plug-in Tee
 Tube Stem
 Item # O.D. (in.) (in.) Price
63885600WP2 1
⁄4 1
⁄4 $2.44
63885600WP2 3
⁄8 3
⁄8 3.87
63886000WP2 1
⁄2 1
⁄2 4.58
6351 End Stop
 Tube
 Item # O.D. (in.) Price
63515600WP2 1
⁄4 $1.01
63516000WP2 3
⁄8 1.26
6325 Faucet Connector -
UNS Thread
 Tube Thread
 Item # O.D. (in.) (in.) Price
632556133WP2 1
⁄4 7
⁄16-24UNS $2.13
632560133WP2 3
⁄8 7
⁄16-24UNS 2.40
From the Trusted Inventor of the Push-to-Connect Fitting
With over 40 years of experience, Legris now presents a range of leakfree,
push-to-connect fittings in a bio-based compact body.
n The most compact profile on the
market
n EPDM patented sealing technology
n Full flow
n No pumping effect
n No need for locking clip or tube
insert
n Optimum performance suitable
for food and water contact
n 100% bio-based material
Working pressure and temperature
1
⁄4" 3
⁄8" 1
⁄2"
230 psi: 35°F - 100°F 190 psi: 35°F - 100°F 160 psi: 35°F - 100°F
150 psi at 150°F 100 psi at 150°F 100 psi at 150°F
60 psi at 200°F 60 psi at 200°F 60 psi at 200°F
n EPDM D Seal secures connection with
a larger surface area than standard O-rings
n Engineered polymer allows superior
mechanical strength and chemical resistance
n Full stainless gripping ring eliminates
the need for locking clips
n Release button protects and supports tubing
n Bio-based body utilizes renewable resources
n FDA compliant
LIQUIfit™ Push-to-Connect Fittings
LIQUIfit Offers:
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 139
139_139 3/30/14 4:34 PM Page 139
Hose, Tubing & Fittings
MES - Male Elbow
Swivel Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Tube Thread C
 Item # O.D. Size Hex Price
 A4MES2-MG 1
⁄4 1
⁄8 9
⁄16 $2.41
 A4MES4-MG 1
⁄4 1
⁄4 11⁄16 2.41
 A4MES6-MG 1
⁄4 3
⁄8 13⁄16 3.64
 A5MES2-MG 5
⁄16 1
⁄8 9
⁄16 2.75
 A5MES4-MG 5
⁄16 1
⁄4 11⁄16 2.75
 A5MES6-MG 5
⁄16 3
⁄8 13⁄16 2.86
 A6MES2-MG 3
⁄8 1
⁄8 9
⁄16 3.48
 A6MES4-MG 3
⁄8 1
⁄4 13⁄16 3.49
 A6MES6-MG 3
⁄8 3
⁄8 13⁄16 3.71
 A8MES4-MG 1
⁄2 1
⁄4 13⁄16 5.61
 A8MES6-MG 1
⁄2 3
⁄8 13⁄16 4.10
 A8MES8-MG 1
⁄2 1
⁄2 1 4.78
Part consists of elbow union and tube stem adapter.
TrueSeal™ Thermoplastic Push-In Fittings
MC - Male Connector
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Tube Thread C
 Item # O.D. Size Hex Price
 A4MC2-MG 1
⁄4 1
⁄8 11⁄16 $1.04
 A4MC4-MG 1
⁄4 1
⁄4 11⁄16 1.22
 A4MC6-MG 1
⁄4 3
⁄8 11⁄16 1.82
 A5MC2-MG 5
⁄16 1
⁄8 13⁄16 1.27
 A5MC4-MG 5
⁄16 1
⁄4 13⁄16 1.34
 A5MC6-MG 5
⁄16 3
⁄8 13⁄16 1.91
 A6MC2-MG 3
⁄8 1
⁄8 13⁄16 2.44
 A6MC4-MG 3
⁄8 1
⁄4 13⁄16 1.84
 A6MC6-MG 3
⁄8 3
⁄8 13⁄16 2.07
 A6MC8-MG 3
⁄8 1
⁄2 15⁄16 3.22
 A8MC6-MG 1
⁄2 3
⁄8 15⁄16 2.86
 A8MC8-MG 1
⁄2 1
⁄2 15⁄16 3.08
TU - Tee Union
Tube-to-Tube
(Gray Acetal Nitrile Seal)
 Tube A. Tube B
 Item # Run Stem Price
 A4TU4-MG 1
⁄4 1
⁄4 $2.41
 A5TU5-MG 5
⁄16 5
⁄16 2.51
 A6TU4-MG 3
⁄8 1
⁄4 3.33
 A6TU6-MG 3
⁄8 3
⁄8 2.86
 A8TU8-MG 1
⁄2 1
⁄2 3.58
EU - Elbow Union
Tube-to-Tube
(Gray Acetal Nitrile Seal)
 Item # Nom. Tube O.D. Price
 A4EU4-MG 1
⁄4 $1.90
 A5EU4-MG 5
⁄16–1
⁄4 2.45
 A5EU5-MG 5
⁄16 2.20
 A6EU4-MG 3
⁄8–1
⁄4 2.75
 A6EU5-MG 3
⁄8–5
⁄16 3.15
 A6EU6-MG 3
⁄8 2.95
 A8EU6-MG 1
⁄2–3
⁄8 3.75
 A8EU8-MG 1
⁄2 3.34
UC - Union Connector
Tube-to-Tube
(Gray Acetal Nitrile Seal)
 Item # Nom. Tube O.D. Price
 A4UC4-MG 1
⁄4 $1.69
 A5UC4-MG 5
⁄16–1
⁄4 1.85
 A5UC5-MG 5
⁄16 1.83
 A6UC4-MG 3
⁄8–1
⁄4 2.30
 A6UC5-MG 3
⁄8–5
⁄16 2.35
 A6UC6-MG 3
⁄8 2.27
 A8UC5-MG 1
⁄2–5
⁄16 2.98
 A8UC6-MG 1
⁄2–3
⁄8 3.10
 A8UC8-MG 1
⁄2 2.67
Standard Materials
 Material Fitting Color O-ring
 Acetal Gray Nitrile
Note: Polypropylene and Kynar also available
 Fitting Size Acetal
 1
⁄2" 300
 5
⁄16" 300
 3
⁄8" 300
 1
⁄2" 250
 Temp. Range -20°F (-29°C) to
 +180°F (85°)
TrueSeal push-to-connect thermoplastic fittings
are light weight, reusable, and connect
to plastic tubing without the use of tools.
WORKING PRESSURE – TrueSeal fittings
are rated for the pressures listed below or at
1
⁄4 (one-fourth) of the rated burst pressure of
the tubing being used (whichever is less).
TUBING – TrueSeal fittings with all plastic
collets can be used with the following tubing
materials: polyethylene, polypropylene,
nylon, Teflon, and polyurethane (3
⁄8" and 1
⁄2"
polyurethane should use tube supports).
APPLICATIONS – TrueSeal fittings find
wide acceptance in water conditioning, filtration,
and reverse osmosis industries and on
water, soft drink, beer, wine, and condiment
dispensing equipment. Industrial applications
range from vacuum to low-pressure hydraulic
and pneumatic systems on robotics, air logic,
packaging/filling equipment, and conveyors.
Ink and dye transfer, lubrication and cooling
lines on presses, machine tools, ion implanting
devices – all rely on TrueSeal.
ME - Male Elbow
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A4ME2-MG 1
⁄4 1
⁄8 $1.65
 A4ME4-MG 1
⁄4 1
⁄4 1.92
 A4ME6-MG 1
⁄4 3
⁄8 2.30
 A5ME4-MG 5
⁄16 1
⁄4 2.39
 A5ME6-MG 5
⁄16 3
⁄8 2.45
 A6ME4-MG 3
⁄8 1
⁄4 2.88
 A6ME6-MG 3
⁄8 3
⁄8 2.94
TS - Tube
Supports (Nylon)
 Item # Price
 N4TS3 $.87
 N5TS3 1.56
 N6TS4 .90
 N8TS6 1.03
AQRT - Quick
Release Tool
Makes disconnection
of tube adapters
and tubing a breeze.
$
149
MTS - Male Tee
Swivel, Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Tube Thread C
 Item # O.D. Size Hex Price
 A4MTS2-MG 1
⁄4 1
⁄8 9
⁄16 $2.94
 A4MTS4-MG 1
⁄4 1
⁄4 11⁄16 2.92
 A5MTS2-MG 5
⁄16 1
⁄8 9
⁄16 3.02
 A5MTS4-MG 5
⁄16 1
⁄4 11⁄16 3.07
 A5MTS6-MG 5
⁄16 3
⁄8 13⁄16 3.12
 A6MTS4-MG 3
⁄8 1
⁄4 13⁄16 3.55
 A6MTS6-MG 3
⁄8 3
⁄8 13⁄16 3.58
 A8MTS4-MG 1
⁄2 1
⁄4 13⁄16 5.86
 A8MTS6-MG 1
⁄2 3
⁄8 13⁄16 5.05
 A8MTS8-MG 1
⁄2 1
⁄2 1 5.05
Part Consists of tee union and tube stem adapter.
Quick Spec
n All components in TrueSeal fittings are
manufactured from FDA compliant
materials and are NSF-51 listed for
contact with food and potable water.
n All-plastic body designs offer
reduced weight, eliminate rust, corrosion,
and system contamination in
applications where metal components
cannot be tolerated.
n Collets are offered with a metal grip
edge made from 300 series stainless
steel for use on all tubing including
copper. Connections made with
metal gripper collets and tube stem
adapters are not reusable.
FC - Female Connector
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Tube Thread C
 Item # O.D. Size Hex Price
 A4FC2-MG 1
⁄4 1
⁄8 11⁄16 $2.10
 A4FC4-MG 1
⁄4 1
⁄4 23⁄32 2.59
 A5FC4-MG 5
⁄16 1
⁄4 13⁄16 2.95
 A5FC6-MG 5
⁄16 3
⁄8 1 3.01
 A6FC4-MG 3
⁄8 1
⁄4 13⁄16 2.95
 A6FC6-MG 3
⁄8 3
⁄8 1 3.02
 A8FC6-MG 1
⁄2 3
⁄8 11
⁄8 3.24
 A8FC8-MG 1
⁄2 1
⁄2 11
⁄8 3.24
BU - Bulkhead Union
Tube-to-Tube
(Gray Acetal Nitrile Seal)
 P Bulkhead
 Nom. L Max. Hole
 Tube C Overall Wall Drill
 Item # O.D. Hex Length Thk. Size Price
A4BU4-MG 1
⁄4 15⁄16 1.50 .50 7
⁄8 $2.92
A5BU5-MG 5
⁄16 11
⁄16 1.75 .62 1 3.76
A6BU6-MG 3
⁄8 11
⁄16 1.75 .62 1 3.82
A8BU8-MG 1
⁄2 11
⁄4 2.04 .70 11
⁄8 4.95
FE - Female Elbow
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A4FE4-MG 1
⁄4 1
⁄4 $2.64
 A6FE4-MG 3
⁄8 1
⁄4 3.49
 A6FE6-MG 3
⁄8 3
⁄8 2.89
MRS - Male Run
Swivel, Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A4MRS2-MG 1
⁄4 1
⁄8 $2.88
 A4MRS4-MG 1
⁄4 1
⁄4 3.05
 A5MRS2-MG 5
⁄16 1
⁄8 5.31
 A5MRS4-MG 5
⁄16 1
⁄4 7.35
 A5MRS6-MG 5
⁄16 3
⁄8 5.07
 A6MRS4-MG 3
⁄8 1
⁄4 3.72
 A6MRS6-MG 3
⁄8 3
⁄8 3.49
 A8MRS4-MG 1
⁄2 1
⁄4 5.78
 A8MRS6-MG 1
⁄2 3
⁄8 5.13
 A8MRS8-MG 1
⁄2 1
⁄2 5.26
FA - Faucet Adapter
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A4FA7-MG 1
⁄4 7
⁄16-24 $1.91
 A5FA7-MP 5
⁄16 7
⁄16-24 2.29
 A6FA7-MG 3
⁄8 7
⁄16-24 2.21
TMC - Tube Stem
Adapter, Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A4TMC2 1
⁄4 1
⁄8 $.54
 A4TMC4 1
⁄4 1
⁄4 .57
 A5TMC2 5
⁄16 1
⁄8 .32
 A4TMC4 5
⁄16 1
⁄4 1.57
 A5TMC6 5
⁄16 3
⁄8 .49
 A6TMC4 3
⁄8 1
⁄4 .57
 A6TMC6 3
⁄8 3
⁄8 .83
 A8TMC4 1
⁄2 1
⁄4 .84
 A8TMC6 1
⁄2 3
⁄8 .71
 A8TMC8 1
⁄2 1
⁄2 .69
TEU - Tube Elbow Union
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A4TEU4-MG 1
⁄4 1
⁄4 $1.46
 A4TEU6-MG 1
⁄4 3
⁄8 1.79
 A5TEU5-MG 5
⁄16 5
⁄16 1.91
 A6TEU4-MG 3
⁄8 1
⁄4 1.93
 A6TEU6-MG 3
⁄8 3
⁄8 1.94
 A8TEU8-MG 1
⁄2 1
⁄2 2.14
WY - Y Union
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A5WY5-MG 1
⁄4 1
⁄8 $10.13
 A6WY4-MG 3
⁄8 1
⁄4 11.79
 A6WY5-MG 3
⁄8 5
⁄16 15.13
 A6WY6-MG 3
⁄8 3
⁄8 15.67
CAP - Tube Cap
Tube-to-Pipe
(Gray Acetal Nitrile Seal)
 Nom. NPTF
 Item # Tube O.D. Thread Size Price
 A4CAP-MG 1
⁄4 $5.43
 A6CAP-MG 3
⁄8 5.97
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 140
140_140 3/30/14 4:35 PM Page 140
Hose, Tubing & Fittings
Union Connector
 Nominal
 Item # Tube O.D. (in.) Price
 P4UC4 1
⁄4 – 1
⁄4 $1.47
 P5UC5 5
⁄16 – 5
⁄16 1.84
 P6UC6 3
⁄8 – 3
⁄8 2.15
 P8UC8 1
⁄2 – 1
⁄2 2.47
 P10UC10 5
⁄8 – 5
⁄8 4.05
 P5UC4 5
⁄16 – 1
⁄4 1.78
 P6UC4 3
⁄8 – 1
⁄4 1.89
 P6UC5 3
⁄8 – 5
⁄16 2.06
 P8UC6 1
⁄2 – 3
⁄8 2.50
 P10UC6 5
⁄8 – 3
⁄8 2.61
 P10UC8 5
⁄8 – 1
⁄2 2.75
Black Polypropylene Tube Fittings
Bulkhead Union
 Nominal
 Item # Tube O.D. (in.) Price
 P4BU4 1
⁄4 $3.69
 P5BU5 5
⁄16 4.60
 P6BU6 3
⁄8 3.84
 P8BU8 1
⁄2 4.16
Elbow Union
 Nominal
 Item # Tube O.D. (in.) Price
 P4EU4 1
⁄4 – 1
⁄4 $2.15
 P5EU5 5
⁄16 – 5
⁄16 2.45
 P6EU6 3
⁄8 – 3
⁄8 2.89
 P8EU8 1
⁄2 – 1
⁄2 3.18
 0P10EU10 5
⁄8 – 5
⁄8 3.86
 P5EU4 5
⁄16 – 1
⁄4 3.38
 P6EU4 3
⁄8 – 1
⁄4 2.58
 P6EU5 3
⁄8 – 5
⁄16 2.75
 P8EU6 1
⁄2 – 3
⁄8 3.15
Tee Union
 Nominal
 Item # Tube O.D. (in.) Price
 P4TU4 1
⁄4 – 1
⁄4 $2.61
 P5TU5 5
⁄16 – 5
⁄16 2.75
 P6TU6 3
⁄8 – 3
⁄8 2.80
 P8TU6 1
⁄2 – 3
⁄8 3.51
 P8TU8 1
⁄2 – 1
⁄2 3.43
 00P10TU6 5
⁄8 – 3
⁄8 4.00
 0P10TU10 5
⁄8 – 5
⁄8 3.86
Tube DD to 75°F to 125°F to 175°F
 1
⁄4" 300 psi 300 psi 300 psi
 5
⁄16" 300 psi 300 psi 300 psi
 3
⁄8" 250 psi 250 psi 150 psi
 1
⁄2" 200 psi 200 psi 150 psi
 5
⁄8" 150 psi 100 psi 50 psi
Nut and Spacer Sets
 For Nom.
 Item # Tube O.D. Price
 P4NS 1
⁄4 $.42
 P5NS 5
⁄16 .44
 P6NS 3
⁄8 .44
 P8NS 1
⁄2 .49
 P10NS 5
⁄8 .54
Tube Support
 Item # For Tube I.D. Price
 P4TS3 .170 $.40
 P5TS3 3
⁄16 .43
 P6TS4 1
⁄4 .48
 P8TS6 3
⁄8 .49
 P10TS8 1
⁄2 .53
O-ring
 Item # Tube 0.D. Price
 40R 1
⁄4 $.17
 50R 5
⁄16 .17
 60R 3
⁄8 .18
 80R 1
⁄2 .24
 100R 5
⁄8 .28
Male Connector
 Nominal NPT
 Tube Thread
 Item # O.D. (in.) (in.) Price
 P4MC2 1
⁄4 1
⁄8 $1.02
 P4MC4 1
⁄4 1
⁄4 1.07
 P5MC2 5
⁄16 1
⁄8 1.07
 P5MC4 5
⁄16 1
⁄4 1.08
 P6MC2 3
⁄8 1
⁄8 1.33
 P6MC4 3
⁄8 1
⁄4 1.30
 P6MC6 3
⁄8 3
⁄8 1.36
 P6MC8 3
⁄8 1
⁄2 1.45
 P6MC12 3
⁄8 3
⁄4 1.51
 P8MC2 1
⁄2 1
⁄8 1.84
 P8MC4 1
⁄2 1
⁄4 1.87
 P8MC6 1
⁄2 3
⁄8 1.84
 P8MC8 1
⁄2 1
⁄2 1.98
 P8MC12 1
⁄2 3
⁄4 2.11
 P10MC2 5
⁄8 1
⁄8 2.30
 P10MC4 5
⁄8 1
⁄4 2.30
 P10MC6 5
⁄8 3
⁄8 2.30
 P10MC8 5
⁄8 1
⁄2 2.37
P10MC12 5
⁄8 3
⁄4 2.50
Female Connector
 Nominal NPT
 Tube Thread
 Item # O.D. (in.) (in.) Price
 P4FC2 1
⁄4 1
⁄8 $1.84
 P4FC4 1
⁄4 1
⁄4 1.44
 P6FC4 3
⁄8 1
⁄4 1.68
 P6FC6 3
⁄8 3
⁄8 1.70
 P6FC8 3
⁄8 1
⁄2 1.94
 P8FC6 1
⁄2 3
⁄8 3.12
 P8FC8 1
⁄2 1
⁄2 3.05
 P10FC8 5
⁄8 1
⁄2 2.37
Male Elbow
 Nominal NPT
 Tube Thread
 Item # O.D. (in.) (in.) Price
 P4ME2 1
⁄4 1
⁄8 $1.36
 P4ME4 1
⁄4 1
⁄4 1.38
 P4ME6 1
⁄4 3
⁄8 1.68
 P5ME2 5
⁄16 1
⁄8 1.58
 P5ME4 5
⁄16 1
⁄4 1.60
 P5ME6 5
⁄16 3
⁄8 2.11
 P6ME4 3
⁄8 1
⁄4 1.87
 P6ME6 3
⁄8 3
⁄8 1.90
 P6ME8 3
⁄8 1
⁄2 2.13
 P6ME12 3
⁄8 3
⁄4 2.23
 P8ME6 1
⁄2 3
⁄8 2.31
 P8ME8 1
⁄2 1
⁄2 2.37
 P10ME8 5
⁄8 1
⁄2 2.55
Male Run Tee
 Nominal NPT
 Tube Thread
 Item # O.D. (in.) (in.) Price
 P4MR2 1
⁄4 1
⁄8 $1.97
 P6MR4 3
⁄8 1
⁄4 2.50
 P8MR6 1
⁄2 3
⁄8 3.43
 P10MR8 5
⁄8 1
⁄2 4.31
Male Branch Tee
 Nominal NPT
 Tube Thread
 Item # O.D. (in.) (in.) Price
 P4MT2 1
⁄4 1
⁄8 $1.84
 P4MT4 1
⁄4 1
⁄4 1.97
 P5MT2 5
⁄16 1
⁄8 2.06
 P5MT4 5
⁄16 1
⁄4 2.03
 P6MT4 3
⁄8 1
⁄4 2.45
 P6MT6 3
⁄8 3
⁄8 2.50
 P8MT6 1
⁄2 3
⁄8 3.18
 P8MT8 1
⁄2 1
⁄2 3.23
 P10MT8 5
⁄8 1
⁄2 3.38
Grab Ring
(Stainless or Plastic)
 For Nom.
Item# Material Tube O.D Price
 4GR Stainless Steel 1
⁄4 $.15
 5GR Stainless Steel 5
⁄16 .15
 6GR Stainless Steel 3
⁄8 .15
 8GR Stainless Steel 1
⁄2 .16
10GR Stainless Steel 5
⁄8 .16
 4GRP Plastic 1
⁄4 .34
 5GRP Plastic 5
⁄16 .68
 6GRP Plastic 3
⁄8 .43
 8GRP Plastic 1
⁄2 .48
10GRP Plastic 5
⁄8 .79
Female Elbow
 Nominal NPT
 Tube Thread
 Item # O.D. (in.) (in.) Price
 P4FE2 1
⁄4 1
⁄8 $1.47
 P4FE4 1
⁄4 1
⁄4 1.78
 P5FE2 5
⁄16 1
⁄8 2.06
 P6FE4 3
⁄8 1
⁄4 1.84
 P6FE6 3
⁄8 3
⁄8 1.84
 P8FE6 1
⁄2 3
⁄8 1.90
 P8FE8 1
⁄2 1
⁄2 2.06
 P10FE8 5
⁄8 1
⁄2 2.13
Fast & Tite thermoplastic tube fittings from Parker will prove to be the
answer to your tubing connector needs. Patented Fast & Tite fittings install
in seconds without tools and provide a tight, sure, leak proof seal without
clamps or adjustments. A unique 302 stainless steel grab ring, for tube
retention, coupled with a Nitrile O-Ring for positive seal, assures good tube
connection with only hand tight assembly. A plastic grab ring is also available
upon special request. Vibration or tube movement will not break the seal
and cause leakage. Preassembled in either highly inert polypropylene, or
strong, durable nylon, Fast & Tite fittings are the answer to full flow thermoplastic
tubing system requirements.
Thermoplastic Fittings – Fast & Tite® Fittings
PPL 25 How to Order PPL Series
Unit
1 = Coupler, valved
2 = Nipple, valved
3 = Coupler, unvalved
4 = Nipple, unvalved
Port Configuration
4MP = 1
⁄4" Male Pipe Thread
6MP = 3
⁄8" Male Pipe Thread
4HB = 1
⁄4" Hose Barb
5HB = 5
⁄16" Hose Barb
6HB = 3
⁄8" Hose Barb
4MBT = 1
⁄4" Male BSPT
6MBT = 3
⁄8" Male BSPT
C4HB = 1
⁄4" 90° Elbow, Hose Barb
C6HB = 3
⁄8" 90° Elbow, Hose Barb
H4HB = 1
⁄4" Bulkhead Hose Barb w/Nut*
H6HB = 3
⁄8" Bulkhead Hose Barb w/Nut*
P P M 1 2 How to Order PPM Series
Unit
1 = Coupler, valved
2 = Nipple, valved
3 = Coupler, unvalved
4 = Nipple, unvalved
Port Configuration
2MP = 1
⁄8" Male Pipe Thread
4MP = 1
⁄4" Male Pipe Thread
2HB = 1
⁄8" Hose Barb
3HB = 3
⁄16" Hose Barb
4HB = 1
⁄4" Hose Barb
2MBT = 1
⁄8" Male BSPT
4MBT = 1
⁄4" Male BSPT
C2HB = 1
⁄8" 90° Elbow, Hose Barb
C4HB = 1
⁄4" 90° Elbow, Hose Barb
H2HB = 1
⁄8" Bulkhead Hose Barb w/Nut*
H3HB = 3
⁄16" Bulkhead Hose Barb w/Nut*†
H4HB = 1
⁄4" Bulkhead Hose Barb w/Nut*
* Valved coupler only
† Not available on valved nipple
1
⁄4" Flow Capacity
1
⁄8" Flow Capacity
QUICK CONNECTIONS
Parker Hannifin’s new push-button
couplings combine the advantages
of thermoplastic material with the
traditional flow functions found in
metal couplings.
PUSH-BUTTON COUPLING FEATURES:
n Easy-to-use Push-to-Connect design, with audible “CLICK” upon connection
n Push-button operation
n Valved and non-valved options
n Compact and lightweight ergonomic design
n Various port configurations available including NPT, BSPT, Hose Barb, and Bulkhead
n Resistant to many chemicals
n Suitable for gas handling applications
PPM & PPL SERIES SPECS
n Flow Capacity
PPM Series: 1
⁄8"
PPL Series: 1
⁄4"
n Rated Pressure: Vacuum to 120 psig
n Temperature: -40°F to +180°F
-40°C to +82°C
n Material
Body: Acetal Copolymer
Latch & Springs: Stainless Steel
O-ring: Nitrile
PPM & PPL Series Thermoplastic Couplings
Prices Starting At $
297
www.facebook.com/webbplastics
Note: Substitute P with; (W) White Polypropylene, (N) White Nylon
Black /White Polypropylene -0°F to
212°F, White Nylon -40° to 200°F
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 141
141_141 3/31/14 7:41 AM Page 141
Duct Fittings & Blowers
Coupling Belled Socket
Size Item # PVC CPVC
6" 4329-060 $32.16 $69.56
8" 4329-080 37.77 88.69
10" 4329-100 44.50 116.82
12" 4329-120 50.25 130.12
14" 4329-140 58.95 160.98
16" 4329-160 68.07 175.67
18" 4329-180 99.43 219.12
20" 4329-200 153.64 275.91
24" 4329-240 207.97 339.61
45° Elbow Belled Socket
Size Item # PVC CPVC
6" 4317-060 $83.17 $151.39
8" 4317-080 103.69 202.55
10" 4317-100 112.39 273.71
12" 4317-120 139.22 331.01
14" 4317-140 164.46 408.12
16" 4317-160 199.30 469.94
18" 4317-180 290.90 633.36
20" 4317-200 399.09 854.75
24" 4317-240 519.39 1,202.01
90° Elbow Belled Socket
Size Item # PVC CPVC
6" 4306-060 $118.71 $198.08
8" 4306-080 133.78 265.66
10" 4306-100 161.44 361.07
12" 4306-120 182.04 431.79
14" 4306-140 214.64 542.66
16" 4306-160 277.29 665.49
18" 4306-180 385.90 944.18
20" 4306-200 586.99 1,186.40
24" 4306-240 708.11 1,587.06
Tee Belled Socket
Size Item # PVC CPVC
6" 4301-060 $150.27 $286.64
8" 4301-080 191.24 372.50
10" 4301-100 241.24 521.23
12" 4301-120 265.79 629.80
14" 4301-140 309.15 739.65
16" 4301-160 398.29 916.49
18" 4301-180 524.14 1,091.14
20" 4301-200 770.23 1,511.86
24" 4301-240 1,029.43 2,158.76
Rain Cap Style B
Size Item # PVC CPVC
6" 4347-060B $475.26 $542.85
8" 4347-080B 537.87 804.99
10" 4347-100B 581.54 975.94
12" 4347-120B 633.22 1,171.94
14" 4347-140B 711.84 1,580.82
16" 4347-160B 863.52 1,800.06
18" 4347-180B 1,044.00 2,206.49
20" 4347-200B 1,197.78 3,245.19
24" 4347-240B 1,386.46 3,534.01
Flat Cap
Size Item # PVC CPVC
6" 4347-060 $66.07 $128.34
8" 4347-080 67.26 152.91
10" 4347-100 72.50 178.26
12" 4347-120 79.32 203.56
14" 4347-140 127.87 279.03
16" 4347-160 139.35 324.69
18" 4347-180 151.84 434.34
20" 4347-200 226.30 477.08
24" 4347-240 231.35 509.06
Reducer Coupling Belled
Socket
Size Item # PVC CPVC
6" x 4" 4329-532 $42.01 $135.78
8" x 4" 4329-582 129.88 334.35
8" x 6" 4329-585 55.08 131.53
10" x 4" 4329-624 242.73 168.04
10" x 6" 4329-626 150.91 341.03
10" x 8" 4329-628 70.76 174.46
12" x 4" 4329-664 270.37 650.92
12" x 6" 4329-666 261.10 515.59
12" x 8" 4329-668 188.95 374.13
12" x 10" 4329-670 82.34 238.67
14" x 4" 4329-694 671.59 836.02
14" x 6" 4329-696 486.55 668.82
14" x 8" 4329-698 286.08 568.51
14" x 10" 4329-700 236.32 582.59
14" x 12" 4329-702 135.21 326.71
16" x 4" 4329-754 811.18 1081.79
16" x 6" 4329-756 657.11 866.70
16" x 8" 4329-758 473.95 734.77
16" x 10" 4329-760 329.68 697.78
16" x 12" 4329-762 355.83 679.01
16" x 14" 4329-764 152.80 419.76
Spears PVC Duct Fabricated Fittings
Blast Gate Damper Belled End
Size Item # PVC CPVC
6" 43BG-060 $198.80 $451.25
8" 43BG-080 225.95 553.45
10" 43BG-100 239.52 682.94
12" 43BG-120 300.11 781.44
14" 43BG-140 398.38 977.28
16" 43BG-160 442.71 1,153.26
18" 43BG-180 522.25 1,464.62
20" 43BG-200 592.73 5,154.33
24" 43BG-240 807.61 2,392.38
PVC & CPVC Thermoplastic Custom Fabrication •Manifolds •Custom Fittings •Offset Connectors
Custom Component Fabrication For Virtually Any Piping System Need! Spears
Manufacturing has the capability to build custom piping system components to virtually any
specifications for either pressure or nonpressure applications. Spears experience in piping system
component fabrications provides the highest quality and technology available for a variety
of industry needs including Agriculture, Turf Irrigation, Water Parks, Aquariums, Pulp & Paper,
Industrial and Chemical Processing.
FITTINGS NOTE: Place a "C" after Item # to designate CPVC.
 PVC CPV PVC PVC PVC CPV PVC PVC CPV PVC PVC CPV CPV CPV CPV
Size 73° 73° 80° 90° 100° 100° 110° 120° 120° 130° 140° 140° 160° 180° 200°
6" 415 426 365 311 257 371 212 166 316 129 91 263 208 153 98
7" 301 265 226 187 153 120 93 66
8" 188 193 166 141 117 168 96 75 143 58 41 118 93 70 45
9" 146 129 110 91 75 59 45 32
10" 97 100 85 73 60 86 50 39 73 30 21 60 48 35 23
11" 82 72 61 51 42 33 25 18
12" 58 60 51 44 36 51 30 23 43 18 13 36 28 20 13
14" 44 45 39 33 27 38 22 18 33 14 10 26 21 15 10
16" 29 30 26 22 18 26 15 12 21 9 6 18 13 10 6
18" 21 26 18 16 13 23 11 8 20 6 4 16 13 10 6
20" 24 28 21 18 15 25 12 10 21 7 5 16 13 10 6
24" 21 20 18 16 13 18 11 8 15 6 4 13 10 6 3
PSI = Inches of Water x .0361; Inches of Mercury = Inches of Water x .07355
MAX. Internal Negative Pressure Rating Inches of Water @ Various Temperatures °F - see table at right.
 PVC CPV PVC PVC PVC CPV PVC PVC CPV PVC PVC CPV CPV CPV CPV
Size 73° 73° 80° 90° 100° 100° 110° 120° 120° 130° 140° 140° 160° 180° 200°
6" 70 70 62 52 43 56 35 28 45 22 15 35 26 16 13
7" 64 56 48 40 32 25 20 14
8" 53 53 47 40 33 43 27 21 33 16 12 26 20 13 10
9" 74 65 55 46 38 29 23 16
10" 43 43 39 32 27 35 22 17 28 13 9 21 16 10 8
11" 61 53 46 38 31 24 19 13
12" 36 36 32 27 22 30 18 14 23 11 8 18 15 8 6
14" 33 33 29 25 20 26 17 13 21 10 7 16 13 8 6
16" 28 28 25 21 17 23 14 11 18 9 6 13 11 6 5
18" 25 25 22 19 15 20 13 10 15 8 5 11 10 5 5
20" 26 26 23 20 16 21 13 10 16 8 6 13 10 6 5
24" 25 25 22 19 15 20 13 10 15 8 5 11 10 5 5
NOTE: Maximum values stated are for extruded duct pipe only, and incorporate a 1.5:1 safety factor.
Consideration should be given to system design, method of fabrication, and joining which may require additional
system derating. The use of compressed air or gases is not recommended for use with PVC/CPVC duct piping.
MAX. Internal Negative Pressure Rating Inches of Water @ Various Temperatures °F MAX. Internal Positive Pressure Rating PSI @ Various Temperatures °F
PVC Duct - Plain End
Item # Size Price/Ft.
PD-430-060-010 6" x 10' L $9.00
PD-430-080-010 8" x 10' L 11.33
PD-430-100-010 10" x 10' L 14.20
PD-430-120-010 12" x 10' L 16.89
PD-430-140-010 14" x 10' L 61.01
PD-430-160-010 16" x 10' L 69.70
20' also available.
CPVC Duct - Plain End
Item # Size Price/Ft.
PD-430-060C-10 6" x 10' L $19.21
PD-430-080C-10 8" x 10' L 25.20
PD-430-100C-10 10" x 10' L 31.54
PD-430-120C-10 12" x 10' L 37.51
PD-430-140C-10 14" x 10' L 242.85
PD-430-160C-10 16" x 10' L 293.93
20' also available.
Blast Gate Damper Belled End
Rain Cap Style B
Flat Cap
Up to 48" Nominal Diameter Fabrication Spears forming capabilities can handle some
of the largest thermoplastic piping component custom fabrication needs.
Pressure & Non-Pressure Applications Produced primarily from thermoplastic pipe and
piping system components, custom products can be fabricated for a variety of pressure applications
based on design criteria and material selection from a variety of Schedule, Class and SDR ratings.
Superior FRP Bonding Technology Spears research in Fiberglass Reinforced Plastic (FRP)
technology has developed superior bonding of fiberglass resin to PVC and CPVC thermoplastic
materials. This eliminates weaker, "egg shell" reinforcement typical in many competitor FRP products.
High Quality Joining & Welding From basic solvent cement welding to precision Hot-Air welds,
Spears controlled quality fabrication gives the highest assurance of sound, reliable construction.
Multi-Outlet Manifolding Spears specializes in multi-outlet manifolds built to specifications
CALL for Job Pricing! for a wide variety of inlet, outlet and reductions in socket, flanged, or threaded connections.
PVC & CPVC Round
Seamless Duct
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 142
142_142 3/30/14 4:40 PM Page 142
Duct Fittings & Blowers


Lab Blower
All Plastic NORTON Blowers are reliable, corrosion-resistant units. They are excellent choices for aggressive applications where metal
blowers corrode. Compared to metal blowers of the same capacity, NORTON plastic blowers often cost less because they last longer.
NOTE: NORTON also manufactures larger industrial blowers — both direct drive and belt driven. If lab blowers do not meet your re quire ments,
contact our sales department for additional information.
Explosion proof models are also available.
1) NORTON blowers are supplied fully assembled in counterclockwise upblast position. Other counterclockwise positions are available on request.
2) Industrial blowers feature round inlets and rectangular outlets.
Simply find your cubic
feet per minute
requirements on the
graph at right.

,  or  line
will be the appropriate
curve.
 Item # A, in. B, in. C, in. D, in. E, in. F, in. G, in. J, in. K, in.
713300050 55
⁄8 65
⁄8 33
⁄4 55
⁄8 9 7 141
⁄2 11 41
⁄2
71430-715300050 91
⁄2 71
⁄4 41
⁄2 8 101
⁄2 71
⁄4 19 151
⁄8 8
71430-715300100 91
⁄2 71
⁄4 41
⁄2 8 101
⁄2 71
⁄4 181
⁄2 151
⁄8 8
Industrial Blower
Blower Dimensions
 Inlet Diameter
 Item # Size Code I.D. O.D. A B E G H H1 K
 72520, 72521 -0160 61
⁄4 65
⁄8 6 49
⁄16 1
⁄2 131
⁄4 10 1511⁄16 10
 72530, 72531 -0200 73
⁄8 73
⁄4 77
⁄16 5 1
⁄8 1
⁄2 141
⁄2 14 2111⁄16 10
 72620, 72621 -0250 93
⁄8 93
⁄4 93
⁄8 611⁄16 1
⁄2 153
⁄4 1515⁄16 2411⁄16 111
⁄2
 72630, 72631 -0310 123
⁄8 123
⁄4 117
⁄8 911⁄16 1
⁄2 171
⁄4 2015⁄16 319
⁄16 131
⁄2
 -0400 155
⁄8 16 155
⁄8 117
⁄8 3
⁄4 23 233
⁄4 3515⁄16 18
Industrial Blowers with Direct Drive – Dimensions (Inches)
 Motor Material Inlet Power Voltage Approx. Ship
 Drive Enclosure Wheel/Housing O.D., in. RPM HP (Phase) Weight, lb. Item # Price
140 to 225 CFM 3
⁄4" to 1
⁄4" Static Pres sure
 Direct TEFC PP/PVC 51
⁄2 1725 1
⁄6 115/208-230 (1) 30 71330-0050 $1,539.00
360 to 625 CFM 3
⁄4" to 1
⁄4" Static Pres sure
 Direct TEFC PP/FRP 8 1140 1
⁄3 115/208-230 (1) 47 71430-0050 1,625.46
 Direct TEFC PVC/FRP 8 1140 1
⁄3 115/208-230 (1) 49 71530-0050 2,031.08
710 to 1,025 CFM 3
⁄4" to 1
⁄4" Static Pres sure
 Direct TEFC PP/FRP 8 1725 1
⁄3 115/208-230 (1) 42 71430-0100 1,532.75
 Direct TEFC PVC/FRP 8 1725 1
⁄3 115/208-230 (1) 44 71530-0100 1,938.37
 Motor Material Inlet Pwr.Voltage Appx.Ship
Drive Enclosure Wheel/Housing OD, In. RPM HP (Phase) Wt., Lb. Item # Price
350 to 500 CFM
DIRECT XP PP/PVC 61
⁄4 1725 1
⁄3 208-230/460(3) 110 72521-0160 $2,380.45
DIRECT TEFC PP/PVC 61
⁄4 1725 1
⁄3 208-230/460(3) 105 72531-0160 2,065.33
BELT XP PP/PVC 61
⁄4 1725 1
⁄3 208-230/460(3) 135 72721-0160 3,601.38
BELT TEFC PP/PVC 61
⁄4 1725 1
⁄3 208-230/460(3) 130 72731-0160 3,237.94
650 to 800 CFM
DIRECT XP PP/PVC 73
⁄8 1140 3
⁄4 208-230/460(3) 125 72520-0200 2,538.88
DIRECT TEFC PP/PVC 73
⁄8 1140 3
⁄4 208-230/460(3) 113 72530-0200 2,340.09
DIRECT XP PVC/PVC 73
⁄8 1140 3
⁄4 208-230/460(3) 128 72620-0200 2,733.67
DIRECT TEFC PVC/PVC 73
⁄8 1140 3
⁄4 208-230/460(3) 116 72630-0200 2,537.19
730 to 1100 CFM
DIRECT XP PP/PVC 73
⁄8 1725 3
⁄4 208-230/460(3) 128 72521-0200 2,635.16
DIRECT TEFC PP/PVC 73
⁄8 1725 3
⁄4 208-230/460(3) 113 72531-0200 2,312.42
BELT XP PP/PVC 73
⁄8 1725 3
⁄4 208-230/460(3) 155 72721-0200 4,737.76
BELT TEFC PP/PVC 73
⁄8 1725 3
⁄4 208-230/460(3) 138 72731-0200 3,437.51
Consult sales office for dimensions and blowers up to 5000 CFM. * Duct to blower connections are available.
Quick Spec
n Resistant to corrosive vapors
n One year warranty
n Blowers come complete with motors – ready to run
n For indoor and outdoor use
n Choice of motors – totally-enclosed fan cooled or
explosion proof optional
n Steel stands are coated with corrosion-resistant
polyurethane paint
n Forward-curved impeller blades (when looking at inlet)
for lower speed, low-noise operation
n Maximum temperature limit of 140°F/60°C
Direct Drive Unit
Lab-Style Blower
Belt Drive Unit




Blowers for Lab and Industrial Use
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 143
143_143 3/30/14 4:42 PM Page 143
D
Specialty Piping Products
DUCT – FRP
n Conductive and abrasion resistant liners
n Round duct up to 156 diameter
n Sprinkler and explosion blow out protection
n Rectangular duct custom made to requirements
SECONDARY CONTAINMENT SYSTEMS
n Pipe in pipe containment systems
n Tank in tank containment systems
n Can fabricate or line dike and trenches with chemically resistant material to contain a leak or spill
n Design, build, and certification capabilities
PIPE & FITTINGS – FRP
n 3/8 through 200 diameter
n 373 Mandrels in 170 sizes
n 83+ Resin Systems
n Bridge Drain
n Threaded Fittings
n Victaulic Fittings
Industrial Fiberglass Specialties, Inc.
AIR-PRO® Compressed Air
Piping System
AIR-PRO FEATURES
n Available in sizes ½" to 12" with socket,
butt and electrofusion fittings in a variety
of styles including tees, reducing tees, 90s and 45s
n Operating pressures from 150 to 230 psi
n Constructed from specially engineered (Solvay Eltex TUB 124
blue) PE 100 high-density polyethylene (HDPE) resin, which
is extremely ductile, light-weight and corrosion resistant
Socket Tee
Item # Size (in) L (in) H (in) s (in) k (in) Price
5820005 1
⁄2 2.362 1.177 0.626 0.551 $6.93
5820007 3
⁄4 2.756 1.378 0.748 0.630 7.75
5820010 1 3.126 1.547 0.760 0.787 11.68
5820012 11
⁄4 3.701 1.831 0.846 0.984 20.12
5820015 11
⁄2 4.252 2.134 0.972 1.161 53.26
5820020 2 4.933 2.461 1.142 1.319 70.92
5820030 3 7.268 3.594 1.488 2.106 148.62
Socket 90°
Item # Size (in) z (in) s (in) k (in) Price
5805005 1
⁄2 1.177 0.626 0.551 $5.99
5805007 3
⁄4 1.378 0.709 0.669 7.21
5805010 1 1.547 0.760 0.787 9.25
5805012 11
⁄4 1.815 0.831 0.984 19.71
5805015 11
⁄2 2.055 0.953 1.102 38.16
5805020 2 2.421 1.043 1.378 50.27
5805030 3 3.311 1.382 1.929 111.39
5805040 4 3.937 1.693 2.244 165.46
Air-Pro® Pipe (sold in 16.4 ft. lengths)
Item # Size (in) O.D. (in) Price
5802005 1
⁄2 0.79 $1.83
5802007 3
⁄4 0.98 2.68
5802010 1 1.26 4.50
5802012 11
⁄4 1.57 7.01
5802015 11
⁄2 1.97 10.91
5802020 2 2.48 17.13
5802030 3 3.54 20.37
5802040 4 4.33 30.51 The Air-Pro® piping system is specifically constructed for compressed
air. Corrosion resistant to compressor synthetic oils
and mineral oils, light-weight, quick to install, and with minimal
system pressure drop, Air-Pro® is the system of choice in
numerous compressed air applications.
Socket Ball Valve
Item # Size (in) L (in) H (in) b (in) s (in) Price
5801005 1
⁄2 3.787 1.890 1.673 0.571 $162.86
5801007 3
⁄4 4.370 2.126 2.165 0.630 195.78
5801010 1 4.724 2.244 2.165 0.709 222.18
5801012 11
⁄4 5.433 3.031 2.559 0.807 284.17
5801015 11
⁄2 6.339 3.465 2.953 1.071 358.62
5801020 2 7.480 3.760 3.425 1.457 461.09
5801030 3 11.181 6.220 5.315 1.398 985.22
5801040 4 10.039 6.220 5.315 1.732 1,175.41
AirPro® Ball Valves sizes 1
⁄2" to 2" are rated 230psi.
AirPro® Ball Valves Sizes 3" to 4" are rated 150psi.
TRITON™ Pipe Fusion System
n Faster equipment setup
How can TRITON benefit your business?
n Faster equipment setup
n Pipes ready for pressure testing almost
immediately
n Reduce manpower requirements
n Safer work environment
n Lower energy consumption
n Quick ramp-up
n Easy to use
Low-extractable piping for
ultra-pure water systems
Harvel LXT® piping systems provide a cost-effective alternative to other piping
materials typically used for ultra-pure water applications in the semiconductor,
electronics, biotechnology and
other industries. Lower material
costs combined with fast, reliable
installation greatly reduce installation
costs – resulting in significant
savings without jeopardizing water
quality.
Features
Harvel LXT Piping Systems offer unique advantages for many
ultra-pure water applications.
n Exceptionally smooth interior walls reduce particle contaminants.
n Fast, reliable installation with simple, inexpensive joining methods.
n Proprietary one-step fast setting joining method reduces TOC contamination and rinses up quickly.
A
Item # Description Size Price From
TR12P1 IPS MPT Adapters 3
⁄4" Through 2" $9.03
TR15P1 IPS Coupling 3
⁄4" Through 2" 10.31
TR18P1 IPS Tees 3
⁄4" Through 2" 14.60
TR19P1 IPS Elbow 3
⁄4" Through 2" 9.00
TR24P1 IPS IPS Caps 3
⁄4" Through 2" 7.98
TR24P1 IPS IPS Fusers 3
⁄4" Through 2" 405.96
TRCU1-M1 Control Unit 2,193.95
A
B
B
C
C
D
NOTE: Additional fittings available.
TRITON is the next-generation
pipe welding system
that will change plastic pipe
joining forever – and accelerate
your business into a
new dimension. TRITON is
the first application of radio
frequency (RF) electromagnetic
technology, a trusted
method of welding used in
industrial applications, to
pipe joining. ¾" Through 2" IPS The fittings are manufactured of PE 4710 and are compatible
with most polyethylene piping materials. (Consult ES-TRPE-Comp for compatibility information.)
NEW
NEW
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 144
144_144 3/30/14 4:43 PM Page 144
Specialty Piping Products
PROGEF® Standard system is an optimal solution
tailored for a wide variety of industrial applications
due to its beneficial properties.
PROGEF® Standard has been designed to be highly
resistant to impact, abrasion and many chemicals.
These properties make it the ideal system for industrial applications, for example, chemical
production, chemical distribution, galvanization and power stations.
PROGEF® Natural PP provides economic and
pure system solutions for chemical sanitized
water application and abrasive fluids.
This unpigmented material has excellent
resistance to particular disinfectants and chemicals.
GF is the only supplier who can truly offer a complete piping system solution for reliable slurry
supply. This added value for our customers is maximized by using PROGEF® Natural for large
diameter slurry supply lines, and SYGEF® PFA, our flexible High Purity Piping System solution
for the smaller hook-up dimensions!
High Purity products are specialty products by definition.
Procedures and protocols to manufacture
and deliver such product must reflect these circumstances.
SYGEF® Plus provides the best solution for conveying
Ultrapure Water (UPW) for manufacturers.
Ultimately, the overall UPW system integrity is assured from source to point of use by the
complete integration of SYGEF® Plus PVDF products and associated jointing technologies.
Adhering strongly to accepted standards such as SEMI, SEMATECH, ISO and DIN, we control the
entire process from the injection moulding of the fittings and valves, to the extrusion of the
pipe as well as the design and construction of the fusion equipment.
SYGEF® Standard PVDF is an excellent piping system
solution for demanding chemical and water
applications, even at elevated temperatures.
For the industrial water and chemical market,
SYGEF® Standard PVDF provides a premier piping
system solution because of its purity characteristics,
chemical resistance and extensive product and fusion offerings.
Quick Spec
Size Range:
n d20 - d90 mm (½" - 3")
Pressure Rating:
n d20 - d63, SDR11: PN10 (150 PSI)
n d75 - d110, SDR17.6: PN6 (90 PSI)
Operating Temperature:
n 0°C - 80°C (32°F - 176°F)
Joining Technology:
n BCF Plus Fusion
n IR Plus Fusion
Standard Ratings:
n FDA CFR 21 177.1520
n USP 25 Class VI
n ASME-BPE
Material:
n Polypropylene Random Copolymer (PP-R)
Fields of Application:
n Pharmaceutical Grade water
n Purified water for Life Science applications
n Cost effective, pure distribution of Lab
Grade DI water and critical biological fluids
n Specified water applications in microelectronics
n Chemical processes (i.e. Chemical
Mechanical Polishing or Planarization)
Advantages:
n Excellent resistance against certain disinfectants
and chemicals (mainly alkaline
solutions)
n Ensures top quality water to USP standards
n Translucence
n High product quality
n High temperature resistance
n Bead and crevice free weldability
Quick Spec
Size Range:
n d16 - d500 mm ( " - 20")
Pressure Rating:
n d16 - d225 mm, SDR11: PN10 (150 PSI)
n d50 - d225 mm, SDR17.6: PN6 (90 PSI)
n d250 - d500 mm, SDR11: PN10 (150
PSI)
n d250 - d500mm, SDR17.6: PN6 (90 PSI)
Operating Temperature:
n 0°C - 80°C (32°F - 176°F)
Joining Technology
n IR Plus Fusion: d20 - d225 mm
n Butt Fusion: d20 - d500 mm
n Socket Fusion: d16 - d110 mm
Standard Ratings:
n FDA CFR 21 177.1520
n USP 25 Class VI
n ASME-BPE
Materials:
n Beta Polypropylene Homopolymer
(Beta PP-H)
Fields of Application:
n RO/DI Water Conveyance
n Process Cooling Water
n Chemical Process Industry
n Food Processing
Advantages:
n High quality system solution with a
favorable price to performance ratio
n Great surface finish and leach out
characteristics
n High impact strength
n High resistance to chemicals and
temperatures
n Performs well over a long period of time
n Outstanding weldability
Quick Spec
Size Range:
n d20 - d315 mm (½" - 12")
Pressure Rating:
n d20 - d110 mm: PN16 (232 PSI)
n d160 - d315 mm: PN10 (150 PSI)
Operating Temperature:
n -20°C - 140°C (-4°F - 284°F)
Joining Technology:
n Socket Fusion: d20 - d110 mm
n BCF Plus Fusion: d20 - d110 mm
n IR Plus Fusion: d20 - d315 mm
Standard Ratings:
n ASME BPE
n FDA CFR 21 177.1520
n USP 25 Class VI
n FM4910
n UL 723
n ASTM E84
Material:
n Polyvinylidene Fluoride (PVDF)
Fields of Application:
n Pharmaceutical Grade DI Water
n Chemical applications within the Chemical
Processing Industry (CPI)
n Acid Distribution
n UPW and HUPW (Hot) Ultrapure Water
return loops in microelectronics
n Life Science applications for sanitization
with ozone, steam, or hot water
Advantages:
n Excellent chemical resistance
n Widely used in chemical distribution systems
n Delivery of PW and DI water
n Disinfection by ozone, UV and chemicals
is possible
n Steam sterilizable up to 284°F
n Free of additives, pigments or stabilizers
n Physiologically inert system
n No reaction with fluids or ingredients in
the piping system
n Neither rouging nor corrosion risk
Quick Spec
Size Range:
n d20 - d450 mm ( ½" - 18")
Pressure Rating:
n d20 - d225 mm: PN16 (232 PSI)
n d90 - d450 mm: PN10 (150 PSI)
Operating Temperature:
n -20°C - 140°C (-4°F - 284°F)
Joining Technology:
n BCF Plus Fusion
n IR Plus Fusion
n Butt Fusion
Standard Ratings:
n ASME BPE
n FDA CFR 21 177.1520
n USP 25 Class VI
n SEMI F57
n FM4910
Material:
n Polyvinylidene Fluoride (PVDF)
Fields of Application:
n Semiconductor UPW/HUPW
n USP Pharmaceutical
n Water for injection (WFI)
n High purity acid distribution
Advantages:
n World's largest cleanroom dedicated to
fluoropolymer manufacturing
n Purity: stringent particle control
n Superior leach out characteristics for TOC,
metals and anions
n Smoothest surface quality
n System safety and reliability
n Longevity
GF Pressure Piping Systems
+GF+
+GF+
+GF+
+GF+
PROGEF® Standard PP PROGEF® Natural PP
SYGEF® Standard PVDF SYGEF® Plus HP PVDF.
NEW
NEW
NEW
NEW
Order Toll Free (800) 343-7555 24-HOUR FAX LINE (800) 232-8726 145
145_145 3/30/14 4:44 PM Page 145
Specialty Piping Products
COOL-FIT ABS Plus is a completely
pre-insulated plastic pipe system
for secondary cooling and refrigeration
systems operated with
brine or glycol solutions.
The system is based on proven and
cold-shock resistant ABS pipe and
fittings, which are insulated with
high-quality PUR foam in addition to a robust and UV-resistant outer pipe. The smooth inner
surface of the ABS pipe provides for minimal pressure loss, while the low thermal conductivity
of plastic and the insulation ensures low energy and running costs for a lifetime. The 3-in-1 construction
also reduces installation time to a minimum. COOL-FIT is ideal for use in cold storage,
in food and beverage production (e.g. in breweries, dairies, slaughterhouses), in supermarkets
as well as for process cooling in industrial cooling water systems or in data centers.
COOL-FIT® ABS Plus is a pre-insulated plastic piping system for unrivaled
energy efficiency and tough secondary cooling and refrigeration.
COOL-FIT® ABS Plus is ready to install on chilled water, air conditioning systems and/or secondary
refrigeration systems outside or where high efficiency is required.
COOL-FIT® ABS Plus is ideal for the transportation of chilled water, iced water, salt solutions,
glycol solutions and organic salt solutions. The system is water and vapor tight.
COOL-FIT® ABS is a complete system solution for secondary cooling and refrigeration piping
systems. The system is based on the tried and tested ABS plastic system from GF Harvel
which contains pipe fittings, valves and transition fittings, now with the option for pre-insulated
pipe and fittings with outer jackets in black (COOL-FIT® ABS Plus).
COOL-FIT® ABS systems offer an energy efficient solution for industrial
low temperature applications, refrigeration and cooling systems.
PE100 Industrial
Polyethylene ushers in a
new generation piping
system designed specifically
for broad-based
applications. The
dynamic combination of specifiable pipe, fittings, valves, and cutting-edge fusion technologies
integrates well into the industrial process industry.
Due to its robust mechanical strength, high impact resistance (including very low
temperatures) and excellent chemical resistance, PE100 Industrial Polyethylene is
the best all-around product for your industrial process application.
COOL-FIT ABS Quick Spec
Size Range:
n d20 - d315 mm (½" - 12")
Pressure Rating:
n 150 PSI
Operating Temperature:
n -50°C to 60°C (-58°F to 140°F)
Joining Technology:
n Solvent (Cement) Weld
Standard Ratings:
n ISO 15493
n DIN 3441
Material:
n Acrylonitrile-Butadiene-Styrene (ABS)
Fields of Application:
n Breweries
n Supermarkets
n Food Processing
n Cold Stores
n Dairies
n HVAC
n Industrial Chilled Water
Advantages:
n Simple and cost-effective installation
n Top quality and efficient, maintenancefree
system
n Reduced energy consumption as well as
resource conservation
n Environmentally friendly
n High impact resistance, even at very low
temperatures
n Temperatures are maintained accurately
due to low heat conductivity
n UV and weathering resistant
n Water and vapor tight
n Ideal for indoor and outdoor applications
n You can adapt the system to your
particular needs
n Reduced energy consumption as well as
resource conservation
n Corrosion-resistant
n Light weight
Quick Spec
Size Range:
n d25 - d315 mm (¾" - 12")
Pressure Rating:
n PN10 (up to 150 PSI)
Operating Temperature:
n -50°C to 40°C (-58°F to 104°F)
Joining Technology:
n Solvent (Cement) Weld
Standard Ratings:
n ISO 15493
n DIN 3441
Materials:
n Acrylonitrile-Butadiene-Styrene (ABS)
n GF PE100 Industrial Polyethylene (PE)
n Polyurethane Rigid Foam Insulation
(PUR)
Fields of Application:
n Breweries
n Supermarkets
n Food Processing
n Cold Stores
n HVAC
n Dairies
n Industrial Chilled Water
Advantages:
n Simple and cost-effective installation;
reduced costs for pipe hanging
n No corrosion
n Top quality and efficient, maintenancefree
system
n Reduced energy consumption as well as
resource conservation
n Environmentally friendly
n High impact resistance, even at very low
temperatures
n Temperatures are maintained accurately
due to low heat conductivity
n Suitable for outdoor applications: UV and
weathering resistant
n Water and vapor tight
n You can adapt the system to your particular
needs
n Light weight
COOL-FIT ABS Plus
Quick Spec
Size Range:
n 20mm - 250mm Metric
n 2" - 36" IPS
Pressure Rating:
n SDR 11 (200 PSI) @ 73°F
n SDR 17 (130 PSI) @ 73°F
Operating Temperature:
-50°C to 60°C (-58°F to 140°F)
Joining Technology:
n IR Plus Fusion
n Butt Fusion
n Electrofusion
Standard Ratings:
n ASTM D638
n ASTM D2837
n ASTM D3035
n FDA CFR 21 177.160
n FDA CFR 21 178.3297
n NSF 61
Material:
n Polyethylene (PE)
GF PE100 Industrial Piping System
GF Cooling and Refrigeration Piping Systems
+GF+
+GF+
+GF+
Visit fwwebb.com/plastics for a complete offering. Best Price, Best Quality and Best Service 146
146_146 3/30/14 4:46 PM Page 146
Specialty Piping Products
www.facebook.com/webbplastics
Pressure Piping Systems
COOL-FIT® ABS
COOL-FIT® ABS Plus
PE100 Industrial Polyethylene
PROGEF® Standard PP
PROGEF® Natural PP
PPro-Seal™ Natural PP
SYGEF® Plus HP PVDF
SYGEF® Standard PVDF
Harvel LXT®
Waste Piping Systems
Fuseal® PP
Corrosive Waste
Fuseal 25/50™
PVDF Corrosive Waste
Fuseal Squared™ PP Double
Containment Corrosive Waste
Contain-It™ Clear PVC
Secondary Containment
Double-See™ PVC and CPVC
Double Containment
ation Applic echnicT aal Dat echnic e OptionsvalV
ations* Applic
Size Range
e Rating sures
e Range aturemper
ogyechnol Joining T
d Ratings andar
ained e Cont Doubl
ype 546 Manual
evalBall V
ap ype 530 AquaT
etauc culating F Recir
ype 515
evalagm V Diaphr
atico-St ype 519 Zer
evalagm V Diaphr
ype 517 Flanged
evalagm V Diaphr
rue-Union ype 514 T
evalagm V Diaphr
emium ype 546 Pr
evalBall V
ype 375
evalBall V
evalee V
ype 561–562
evalCheck V
ype 365
evalerfly VButt
ype 567/568
evalerfly VButt
COOL-FIT® ABS
COOL-FIT® ABS Plus
trial P PE100 Indus
 ABS Plus
erieswe• Br
• Supermark
ocood Pr• F
esor• Cold St
ene
erieswe• Br
• Supermark
ocood Pr• F
esor• Cold St
ethylyoltrial P
ated W• Chill
s Cooling W esoc• Pr
trial W • Indus
at• Bulk W
Applic
Size Range
ets • Supermark
singes
es
16–315mm
(
3
/8”–12”)
ets • Supermark
singes
es
25–315mm
(¾”–12”)
erat
erat s Cooling W
eatmentrer Tattrial W
tribution er Dis
2"–36"
SDR 11/17
esPr
emperT
16–315mm
”–12”)
oUp t
150 PSI
o 60°C −40°C t
140°Fo t−40°F
25–315mm
(¾”–12”)
oUp t
150 PSI
o 40°C −50°C t
104°Fo t−58°F
2"–36"
SDR 11/17
oUp t
200 PSI
o 60°C −50°C t
140°Fo t−58°F
Joining T
andarSt
ent Cement vSol ISO 15493 DIN 3441
ent Cement vSol ISO 15493 DIN 3441
IR Plus® usion F
usion Butt F
ofusionectrEl
ASTM D3035
A CFR 21.177.160 FD
NSF 61
Doubl
ype 546 Manual T
Ball V
ype 530 AquaT T
Recir
N/A N/A
N/A N/A
ASTM D3035
A CFR 21.177.160 N/A N/A
ype 515T
Diaphr
ype 519 Zer T
Diaphr
ype 517 Flanged T
Diaphr
20–63mm
(½”–2”) N/A 75–110mm (2½”–4”)
20–63mm
(½”–2”) N/A 75–110mm (2½”–4”)
N/A N/A ½”–4”
Diaphr
ype 514 TT
Diaphr
ype 546 Pr T
Ball V
75–110mm
(2½”–4”)
20–63mm
(½”–2”)
16–110mm
(
3
/8”–4”)
75–110mm
(2½”–4”)
20–63mm
(½”–2”)
16–110mm
(
3
/8”–4”)
½”–4” ½”–2” ½”–4”
ype 375T
Ball V
ee VT
ype 561–562 T
Check V
N/A N/A 20–110mm (½”–4”)
N/A N/A 20–110mm (½”–4”)
N/A ½”–12” ½”–4”
ype 365T
Butt
ype 567/568 T
Butt
20–110mm N/A 2”–8”(T567)
2”–8”(T568)
20–110mm N/A 2”–8”(T567)
2”–8”(T568)
2”–36” (Std) 2”–24”
emst e Piping Sys sures PROGEF® andar St PROGEF® Natur o-SealPPr ™ Naturd PP
er Disat• Bulk W
andar
al PP
ade DI W • Lab Gr
s Cooling W esoc• Pr
al Deliv • Chemic
se Osmosis erv• Re
al P
ade DI W • Lab Gr
eutic • Pharmac
 Natur P
ade DI W • Lab Gr
se Osmosis erv• Re
al Deliv • Chemic
tribution er Dis
eratade DI W
erat s Cooling W
ery al Deliv
se Osmosis
16–500mm
(
3
/8”–20”)
eratade DI W
eratade Wal Greutic
20–90mm
(½”–3”)
eratade DI W
se Osmosis
eryal Deliv
½”–3”
16–500mm
”–20”)
oUp t
150 PSI
o 80°C 0°C t
o 176°F 32°F t
20–90mm
(½”–3”)
oUp t
150 PSI
o 80°C 0°C t
o 176°F 32°F t
½”–3” oUp t 150 PSI o 80°C 0°C to 176°F 32°F t
IR Plus® usionF
usion Butt F
usionet FSock
A CFR 21.177.1520 FD
s VI USP 25 Clas
BCF® usion Plus F
IR Plus® usion F
A CFR 21.177.1520 FD
s VI USP 25 Clas
ofusionectrEl
eadedThr
A CFR 21.177.1520 FD
ASTM D 4101
ASTM F 1290
s VI
A CFR 21.177.1520
USP 25 Clas
s VI N/A N/A
A CFR 21.177.1520
s VI N/A
32–63mm
(1"–2");
1½"–2½"
arysanit
A CFR 21.177.1520
ASTM D 4101
ASTM F 1290
s VI
N/A N/A
20–63mm
(½”–2”)
20–110mm
(½”–4”)
20–160mm
(½”–6”)
20–63mm
(½”–2”)
20–90mm
(½”–3”)
20–63mm
(½”–2”)
½”–2” N/A N/A
20–160mm
(½”–6”)
20–63mm
(½”–2”)
16–110mm
(
3
/8”–4”)
20–63mm
(½”–2”) N/A N/A
N/A N/A N/A
N/A 63–160mm (2”–6”) 20–110mm (½”–4”)
20–63mm
(½”–2”) N/A N/A
½”–3” N/A N/A
20–110mm N/A 2”–24”(T567)
2”–8”(T568)
N/A N/A
N/A N/A
esPr
GEFYS ® Plus HP PVD
GEFYS ® andar St
el LXTHarv ®
 Plus HP PVDF
d PVD
onduct • Semic
• USP Pharmac
or Injection (WFI) er fat• W
• High Purity Acid Dis
andar F eutic • Pharmactribution • Acid Dis
e wata-pur• Ultr
 (UPW, DI, R/O, dis
or UPW/HUPW onduct
aleutic • USP Pharmac
or Injection (WFI)
tribution • High Purity Acid Dis
20–450mm
(½”–18”)
eratade DI W al Greutic
tribution
20–315mm
(½”–12”)
ems ter syse wat
ed, USP)till (UPW, DI, R/O, dis ½” –6”
20–450mm
(½”–18”)
oUp t
232 PSI
o 140°C −20°C t
o 284°F −4°F t
20–315mm
(½”–12”)
oUp t
232 PSI
o 140°C −20°C t
o 284°F −4°F t
½” –6” o Up t 420 PSI o 60°C 23°C to 140°F 73°F t
BCF® usion Plus F
 IR Plus® usion F
usion Butt F
ASME BPE
A CFR 21.177.2510 FD
s VI USP 25 Clas
SEMI F57
FM4910
BCF® usion Plus F
IR Plus® usion F
usion Butt F
usionet FSock
ASME BPE
A CFR 21.177.2510 FD
s VI USP 25 Clas
FM4910, UL723, ASTME84
ent Cement vSol
ASTM D1784
ASTM D792
ASTM D638
NSF 61
ASME BPE
A CFR 21.177.2510
s VI N/A N/A
ASME BPE
A CFR 21.177.2510
s VI
FM4910, UL723, ASTME84
N/A
32–63mm
(1"–2");
1½"–2½"
arysanit
ASTM D1784
ASTM D792
ASTM D638 N/A
20–63mm
(½”–2”)
20–110mm
(½”–4”)
20–160mm
(½”–6”)
20–63mm
(½”–2”) N/A 20–160mm (½”–6”)
20–160mm
(½”–6”)
20–63mm
(½”–2”) N/A
20–160mm
(½”–6”)
20–63mm
(½”–2”)
16–110mm
(
3
/8”–4”)
N/A N/A N/A
N/A N/A 20–110mm (½”–4”)
2”–18” (HP) N/A
20–110mm N/A 2”–12”(T567)
2”–8”(T568)
emst e Piping Sys
usealF ® PP
tase WosivCorr e
useal 25/50 F ™
e Wosiv PVDF Corr
ed useal Squar F ™
ainment Corr Cont
e
t
e Wosiv• Corr
ory Wat• Labor
ocood Pr• F
ase W e
™
e Wosiv• Corr
enums Air Pl
e Wosiv• Corr
aturemperT
e PP Doubl
tase Wosiv ainment Corr e
e Cont • Doubl
ainageDr
ainagee Drtase W
ainagee Drtasory W
ainagee Drtassing Wes
1½”–12”
or Return ainage f e Drtase W
enums
ed atve ainage at El e Drtase W
esatur
1½”–6”
e tase Wosiv ained Corr e Cont 1½” × 4”–
1½”–12”
8" × 12"
o**Up t
50 PSI
o 100°C 0°C t
o 212°F 32°F t
1½”–6” o**Up t 50 PSI o 140°C −20°C to 284°F −4°F t
1½” × 4”–
8" × 12"
o**Up t
50 PSI
o 100°C 0°C t
o 212°F 32°F t
ofusionectrEl
al Joint Mechanic
ASTM F 1412
ASTM D 3311
ASTM D 4101
wNSF-c
ofusionectrEl
ASTM F 1673
ASTM D 3311
ASTM E 84
UL 723
ofusionectrEl
ASTM F 1412
ASTM D 3311
ASTM D 4101
ASTM F 1412
ASTM D 3311
ASTM D 4101
IGC 164-2001
N/A
ASTM F 1673
ASTM D 3311
ASTM E 84 N/A
ASTM F 1412
ASTM D 3311
ASTM D 4101
IGC 164-2001
N/A
e Piping Sys tasW ain-ItCont ear PV™ Cl ainm ondary Cont Sec
e-See Doubl ™ PV
ainment e Cont Doubl
Cear PV
ainment
C
al Pr • Chemic
e Chemic osiv• Corr
eum Chemic oletr• P
C and CPV PV
ainment
er and Wat• W
al Deliv • Chemic
• Dosing and Pr
ainment s Line Cont esocal Pr
ainment e Conttasal W e Chemic
ainment al Cont eum Chemic
4”–6”
eatmentrer Tate Wtaser and W
eryal Deliv
singesoc • Dosing and Pr
½” × 2"–
6" × 10"
4”–6” oUp t 32 PSI o 60°C 0°C to 140°F 32°F t
½” × 2"–
6" × 10"
aries by size V
(primary)
o 50 psi Up t
ondary) (sec
aries by pipe V
e Joint Adhesiv
ASTM D 1784
ASTM D 3034
UL94
40CFR80
ent Cement vSol
NSF/ANSI 14 & 61
ASTM D 1784
ASTM D 3034
ASTM D 1784
ASTM D 1785
ASTM D 2467
N/A
NSF/ANSI 14 & 61
ASTM D 1784
ASTM D 1785
ASTM D 2467
½”× 2”–
2” × 4”
 
for a complete
online offering
*Please reference the GF Chemical Resistance Guide at www.gfpiping.com **Standard test pressure up to 15 psi. Pressure waste discharge of up to 50 psi may be allowable.
147
147_147 3/31/14 7:40 AM Page 147
Signet 9900 Transmitter
High Purity PFA Tubing
Polypropylene Dry Disconnect
FLV Series & CFLV Series Filter Housings
+GF+ See page 20.
See page 30.
See page 77.
This Transmitter provides a single channel interface for many
different parameters. The Transmitter (Generation II) has
the added capability of supporting the Batch Module for
batching control. The extra large (3.90" x 3.90") autosensing
backlit display features “at-a-glance” visibility The display
shows separate lines for units, main and Secondary
measurements as well as a “dial-type” digital bar graph.
Manufactured for use in hostile environments where purity is
critical. Testing has proven that these High Purity PFA products
are able to withstand corrosive surfactants for longer
periods of time than the standard products. High Purity PFA
products are available in various sizes upon request.
User friendly: Operating Dry-Mate is simple. The handles
interlock making it easy to identity which handle opens or
closes first. No guessing involved! The two Dry-Mate halves
couple together with cam levers for positive engagement.
Design: The Banjo Dry-Mate is designed for safe and easy
spill free connections. The “double ball” design allows maximumflow,
while the cam lever style of connection is the most
recognized fluid connector.
Prevents Accidental Spills and Exposure!
FLV Series Simplex Bag Filter Housing features a one piece, injection
molded. Platinum Glass Filled Polypropylene body with FPM Seal. Filter
bags sold separately.
CFLV Series Simplex Cartridge Filter Housing is offered
in the revolutionary Platinum GFPP with FPM seals only. Units
are Simplex, Duplex, Triplex and Quadplex. True union end
connections in sizes 2" to 4".
NEW
NEW
 
310 229
940 090 719 123
941 161 719 074
Run-up valve actuator 1
2F-40250LN-4 441536 0.025 to 0.250 0.1 to 1.0 1
⁄4" F/NPT Polypropylene PVDF $88.67
F-40250LN-6 441537 0.025 to 0.250 0.1 to 1.0 3
⁄8" F/NPT Polypropylene PVDF 88.67
F-40050LN-4 441527 0.050 to 0.500 0.2 to 2.0 1
⁄4" F/NPT Polypropylene 316SS 88.67
F-40050LN-6 441528 0.050 to 0.500 0.2 to 2.0 3
⁄8" F/NPT Polypropylene 316SS 88.67
F-40375LN-6 230258 0.1 to 1.0 0.4 to 4.0 3
⁄8" F/NPT Polypropylene Teflon 88.67
F-40375LN-8 560259 0.1 to 1.0 0.4 to 4.0 3
⁄8" F/NPT Polypropylene Teflon 75.84
F-40376LN-6 441546 0.2 to 2.0 1.0 to 7.5 3
⁄8" F/NPT Polypropylene 316SS 75.84
F-40376LN-8 230261 0.2 to 2.0 1.0 to 7.5 1
⁄2" F/NPT Polypropylene 316SS 75.84
F-40377LN-6 441553 0.3 to 3.0 1.5 to 11 3
⁄8" F/NPT Polypropylene 316SS 81.76
F-40377LN-8 230263 0.3 to 3.0 1.5 to 11 1
⁄2" F/NPT Polypropylene 316SS 81.76
F-40500LN-6 230264 0.5 to 5.0 2.0 to 20 3
⁄8" F/NPT Polypropylene 316SS 75.84
F-40500LN-8 230265 0.5 to 5.0 2.0 to 20 1
⁄2" F/NPT Polypropylene 316SS 75.84
F-40750LN-12 230266 1 to 10 4 to 38 3
⁄4" F/NPT Polypropylene 316SS 146.10
F-40750LN-16 230267 1 to 10 4 to 38 1" F/NPT Polypropylene 316SS 146.10
F-41017LN-12 230270 1 to 17 4 to 64 3
⁄4" F/NPT Polypropylene 316SS 146.10
F-41017LN-16 230271 1 to 17 4 to 64 1" F/NPT Polypropylene 316SS 146.10
F-41000LN-12 230268 2 to 20 8 to 80 3
⁄4" F/NPT Polypropylene 316SS 146.10
F-41000LN-16 230269 2 to 20 8 to 80 1" F/NPT Polypropylene 316SS 146.10
310 316 719 120
940 121 709 774
945 032 719 079
Pressure relief valve 1
1
310 137 719 090
973 592 719 107 945 034 719 038 Manifold plug (V2 in.) 4
973 543 719 125 945 026 719 077 Manifold plug (7/16 in. 1
310 120 719 092
310 247+ 719 094
941 240 719 075 DC to manifold
940 121 709 774 DC (isolator-external)
940 181 719 072 DC (isolator-internal)
973 384 719 108 945 025 719 080 Manifold plug (?/a in.) 4
275 481* 719 122 940 111 710 742 Drain valve (3-hole) 1
275 288* 719 082 Drain valve (4-hole) 1
941 521 719 081 Pump OD
940 111 710 742 Gas inlet to pump
940 161 709 776 Manifold pressure gauge port
945 026 719 077 Pressure gauge fitting

719 099 Kit, Pump Replacement
719 095 Kit, Manifold Replacement
6 Nordson Corporabon 1992 P/N 108 381A
AU Rights Reserved 41-180 Ill92

PM 108 381A
41-180 11/92 Q Nordson Corporation 1992
All Rights Reserved
Illustrated Pam Lists 8-43
This Page Intentionally
Left Blank
0 Nordson Corporabon 1992
All Rfghts Reserved
P/N 108 381A
41-180 11192
8-44 Illustrated Parts Lists
Figure 8.12 - Density Controller/Filter Assembly
A - Flow inlet
B - Flow outlet
C - lndex plate details with adjustment knob removed
C 24
P/N 108 381A
41-180 11/92 Q Nordson Corporation 1992
All Rights Reserved
lllustra ted Parts Lists 8-45
Density Con troller/Filter Assembly Parts List
Item
No.
Part No. Description Required
s 310 120
1 310 246
2 310 123
3 310 124
4 310 125
5 310 247
6 310 127
7 310 128
a 310 129
9 310 130
10 987 013
11 240 459
12 981 705
13 981 020
14 981 022
15 310 131
16 310 133
17 161 106
18 941 240
19 983 111
20 983 253
21 900 223
22 983102
23 986 305
24 900 419
25 Not Used
26 900 424
27 981 045
FM-l 80H Density Controller/Filter Assembly (Figure 8.12)
l Bung, Control, Density, w/Index Plate
l Core, Density Control/Filter
l Slug, 2-Hole
l Rod, Adjustment
l Insulator, Shaft, w/O-rings
* Plate, Insulator
0 Contactor, Rod
l Knob, Adjustment
l Tube, Insulator
l Spring
l Support, Filter
l Screw, Socket Head, 8-32 x 1 .OO in.
l Screw, Pan Head, 6-32 x 0.25 in.
l Screw, Fillister Head, 6-32 x 0.38 in.
l Assembly with Ball, Tip
. Assembly, Stop Screw
l Screen, 0.006 in.
l O-ring, Viton, 1.25 x 1.438 x 0.063 in.
l Lockwasher, Split, No. 8
. Washer, Flat, 0.156 x 0.438 x 0.04 in.
l Lubricant, O-ring, Parker (PSNC)
l Lockwasher, Split, No. 6
l Clip, Wire Retaining
l Adhesive, Loctite No. 620 (PSNC)
Compound, Thread-Locking
Screw, Socket Head Set, 6-32 x l/z
Ref
1
1
1
1
1
2
1
1
4
1
1
4
2
1
1
1
1
1
4
1
2
0 No&on Corporation 1992
All Rights Reserved
P/N 108 381A
41-180 11/92
8-46 Illustrated Parts Lists
Figure 8.13 - Run-up Valve Assembly
A - Hydraulic inlet
B - Hydraulic discharge
C -Air vent
D -Air inlet
Pm 108381A
41-180 11/92 0 Nordson Corporation 1992
All Rights Resewed
lllus tra ted Parts Lists 847
Run-Up Valve Assembly Parts List
Item
No.
Part No. Description Required
310 229
310 162
940 141
310 169
987 051
310 161
942 111
310 165
310 165
310 231
310 233
310 329
750 553
900 236
900 419
900 805
940 090
941 161
973 125
983 012
986 502
153 015
FM-l 80H Run-Up Valve Assembly (Figure 8.13)
l Seat, Valve, Lapped
. O-ring, Viton, 0.50 x 0.625 x 0.063 in.
l Carrier, Ball
l Spring
. Body, Valve
l O-ring, Viton, 0.812 x 0.062 x 0.125 in.
l Ring, Stop
. Valve Actuator Assembly, Run-Up
l l Body, Actuator, Valve
l l Piston Assembly
l l Cap, Cylinder
l l Elbow, Male, %I NPT x t/4 Tube
l l Seal, Hat, Formed
l l Paste, Teflon (PSNC)
l l Adhesive, Loctite No. 620 (PSNC)
l l Cap/Plug, 0.875 in. Tubing
l l O-ring, Viton, 0.218 x 0.344 x 0.063 in.
l l O-ring, Viton, 0.75 x 0.938 x 0.094 in.
l l Elbow, Pipe, Auto, Str, l/ii
. l Disk, Seal Support
l l Ring, Retaining, Internal
l l Washer, Flat
l l Assembly, Rod, Piston
l l Head, Piston
Ref
1
1
1
1
1
1
1
1
1
J
1
1
2
0 Nordson Corporation 1992
All Rights Reserved
P/N 108 381 A
41-180 II/92
8-48 lllustra ted Parts Lists
I
0
I
I
4-’ I
I
I I
!
o- 8
Figure 8.14 - Drive Assembly
41-180 l/94
-.-- --- --r
All Rights Reserved
//lustrated Parts Lists 8-49
Drive Assembly Parts List
Item
No.
Part No. Description Required
D
2
3
4
5
6
7
8
9
10
11
12
13
14
15
147 980
153 904
s
987 030
144 693
981 014
s
273 699
941 261
118 823
147 869
986 311
147 425
986 106
273 698
900 301
FM-180H Drive Assembly (Figure 8.14)
l Coupling, Drive Assembly
l . Coupling, Drive
l l Pin, Dowel, 0.188 x 1 .OO in.
l Spring, Compression, 2.00 x 0.48 x 0.04 in.
l Sleeve, Coupling, 1.25 in. OD x 1 .OO in. long
l Screw, Pan Head, 4-40 x 0.25 in.
l Pin, Dowel, 0.188 x 1.00 in.
l Washer, Flat, 0.63 x 1 .OO x 0.055 in.
l O-ring, Viton, 1.375 x 1.563 x 0.103 in.
l Body, Drive, FM-180
l Bearing with High-Temp Grease
l Bearing with High-Temp Grease, Double Row
l Ring, Retaining, Internal, 2.047 in., Basic
. Shaft, Drive
l Ring, Retaining, External, 0.625 in., Basic
l Seal, Face, 0.625 in. Diameter Shaft
l Grease, Lubricating, Silicone (PSNC)
Service Kits
Bearings - 153 197
118 823 Bearing with High-Temp Grease
147 869 Bearing with High-Temp Grease, Double Row
986 311 Ring, Retaining, Internal, 2.047 in., Basic
Seal Assembly - 153 799
w Pin, Dowel, 0.188 x 1 .OO in.
273 699 Washer, Flat, 0.63 x 1 .OO x 0.055 in.
941 261 O-ring, Won, 1.375 x 1.583 x 0.103 in.
986 106 Ring, Retaining, External, 0.625 in., Basic
273 698 Seal, Face, 0.825 in. Diameter Shaft
Drive Coupling Assembly - 153 203
153 904 Coupling, Drive Assembly
s Coupling, Drive
m Pin, Dowel, 0.188 x 1 .OO in.
987 030 Spring, Compression, 2.00 x 0.48 x 0.04 in.
144 893 Sleeve, Coupling, 1,25 in. OD x 1 .OO in. long
981 014 Screw, Pan Head, 4-40 x 0.25 in.
Ref
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
s
P/N 108 3818
41-180 l/Q4
ONordson Corporalton 1994
All Rights Reserved
8-50 Illustrated Parts Lists
FM-180 Processor Ship-With Kit Patts List
Part No. Description Required
150 117
273 919
150 067
310 281
900 300
901 492
272 749
274 466
274 725
296 095
972 025
972 026
900 348
973 037
939 521
108 381
Kit, Ship-With, FM-l 80 Series
l Tool, Trimmer, Adjustment
l Tool, Drive Alignment
l Fitting w/O-ring, Size 6-10
l Fluid, Leak Detector
l Paste, Teflon, 11’4 lb. can
l Filter, Air, l/4 NPT
l Plug, Connector
l Hood, Plug
9 Connector, Strain Relief
l Connector, Male, 3-Pole
l Connector, Male, 37-degree, 0.50-20 x l/4 NPT
l Connector, Male, 37-degree, 0.50-20 x l/a NPT
l Lubricant, Never Seez, Tube, 1 oz.
l Nipple, Hex, V4 x V4 x 1.45 in.
l Pin, Crimp Cont., 20-16 gauge
l Manual, Technical, FM-l 80
Ref
1
1
4
1
1
1
1
1
1
2
1
1
1
1
5
1
Pm 100 3alA
41-180 11~2
0 Nordson Corporation 1992
All Rights Reserved
lllvstra ted Parts Lists 8-51
List of Recommended Spare Parts
Part No. Description Required
l
*
939 047
939 062
939 300
310 393
147 916
310 386
939 567
310 287
939 576
939 538
939 660
310 358
365 039
365 237
310 339
310 341
365 231
310 340
310 389
310 388
Electrical (* denotes use during regular maintenance)
l Fuse, 10 amp (Fl -F3, F5-F7 on main fuse block) .
l Fuse, 1 amp (F4 on main fuse block)
l Fuse, 25 amp (motor controller)
l Motor Assembly
l Heater Strip (hopper)
l Sensor Assembly, RTD
l Breaker, Circuit, 50-50-50 amp
l Contactor, 3-Pole, 50 amp, w/Aux Switch
. Relay, Solid State, 40 amp
l Relay, Solid State, 25 amp
l Relay, Solid State, 5 amp
. Control Assembly, Motor, Current, Sensor
l Power Supply Assembly, w/Leads
l Board Assembly, TCU w/EPROM
l Board, Circuit, Control
l Board, Circuit, Interface
l Board Assembly, ROS, w/EPROM
l Board, Circuit, Operator/Display
l Sensor Assembly, Magnetic
l Transformer Assembly, Current
6
1
2
1
1
3
1
1
1
1
3
1
1
1
1
1
1
1
1
1
310 362
310 229
310 137
310 120
161 106
310 458
310 850
310 436
310 440
901 131
310 498
ii0 780
Mechanical (* denotes use during regular maintenance)
l Transducer Assembly, Pressure, w/Plug
l Valve Assembly, Run-up
l Valve, Relief, Pressure, 1,500 psi
l Controller, Density w/Filter Assembly
* l Screen, 0.006 in. mesh
l Filter Base
. Belt, Timing, 30 x 800 mm, Hi-Temp
l Bearing, Yoke Roller
Pneumatic and Gas
l Regulator, Air Pressure (Gas)
c Valve, Check, %r Ports, 7 psi
l Valve, Reedex, 100 psi, PC Mount
l Service Kit, Transducer Assembly
0 Nordson Corporation 1992 P/N 108 3alA
Ail Rghts ReSeNed 41-180 11192
Illustrated Parts Lists
List of Recommended Spare Pafls (continued)
Part No. Description Required
941 521
940161
940 111
940 161
945 026
945 034
945 025
942 111
940 141
941 240
940 121
945 032
940 151
940 181
941 261
900 223
900 298
O-Rings (* denotes use during regular maintenance)
l O-ring, Viton, 3.25 in. ID (pump OD)
l O-ring, Viton, 0.63 in. ID (Pump Outlet)
l O-ring, Viton, 0.31 in. ID (Pump Gas Inlet)
l O-ring, Viton, 0.63 in. ID (Pressure Readout Ports)
l O-ring, Viton, 114 Tube (Pressure Readout Fitting)
l O-ring, Viton %s Tube (Manifold Fitting Cross Drill Ports)
. O-ring, Viton, % Tube (Manifold Hose Ports)
l O-ring, Viton, 0.81 in. ID (Pressure Control Valve)
l O-ring, Viton, 0.50 in. ID (Pressure Control Valve)
l O-ring, Viton, 1.25 in. ID (Density Control/Filter)
l O-ring, Viton, 0.38 in. ID (Pressure Relief Valve)
l O-ring, Viton, %I Tube (Pressure Relieve Valve)
l O-ring, Viton, 0.56 in. ID (Drain Valve to Manifolcl;
for 4-mounting hole drain valves)
. O-ring, Viton, 0.75 in. ID (Drain Valve to Manifolcl;
for 3-mounting hole drain valves)
l O-ring, Viton, 0.563 in. ID (Drive Assembly to Drive Support)
Miscellaneous (* denotes use during regular maintenance)
l Lubricant, O-ring, 4 oz. (For o-ring service)
l Paste, Teflon, 4 oz. (for NPT fitting service)
l Compound, Heatsink (for SSR service)
1
1
1
2
1
4
4
1
1
1
1
1
1
1
1
134 ioa 3alA
41-180 11192 Q Nordson Corporation 1992
All RughIs Reserved
Illustrated Parts Lists 8-53
List of Service Items/Service Kits
Part No. Description Required
310 218 Kit, Replacement, Gear Pump
l Pump
941 521 0 O-ring, Viton3.25 x 3.438 x 0.094 in. ID (Pump OD)
940 161 l O-ring, Viton, 0.625 x 0.75 x 0.063 in. ID (Pump Outlet)
940 111 l O-ring, Viton, 0.313 x 0.438 x 0.063 in. ID (Gas Inlet)
273 749 l Tag, Instruction
Ref
1
1
1
1
1
310 223
983 503
983 140
984 204
941 521
940 161
940111
940151
940 181
945 026
945 032
940 121
942 111
940 141
941 240
Kit, Replacement, Manifold
l Manifold w/Studs and Plugs
. Washer, Flat, 0.281 x 0.625 x 0.125 in.
l Lockwasher, 0.25 in.
l Nut, Hex, High, l/4-28
. O-ring, Viton, 3.25 x 3.438 x 0.094 in. ID (Pump OD)
l O-ring, Viton, 0.625 in. ID (Pump Outlet/Pressure Readout Ports)
l O-ring, Viton, 0.313 x 3.438 x 0.063 in. ID (Gas Inlet)
l O-ring, Viton, 0.563 x 0.688 x 0.063 in. (4hole drain valve)
l O-ring, Viton, 0.75 x 0.875 x 0.063 in. (3-hole drain valve)
l O-ring, Viton, 11’4 Tube (Pressure Readout Fitting)
l O-ring, Viton, %I Tube (Pressure Relief Valve)
l O-ring, Viton, 0.375 x 0.50 x 0.063 in. ID (Pressure Relief Valve)
* O-ring, Viton, 0.812 x 0.062 x 0.125 in. ID (Pressure Control Valve)
l O-ring, Viton, 0.50 x 0.625 x 0.063 in. ID (Pressure Control Valve)
l O-ring, Viton, 1.25 x 3.438 x 0.063 in. ID (Density Control Valve)
Ref
1
2
2
2
1
3
1
1
1
1
1
1
1
1
1
365 422 Service Kit, EPROM, TCU Board (units w/standby) Ref
132 049 Service Kit, EPROM, TCU Board (units w/out standby) Ref
ii0 780
971 266
900 236
971 265
Service Kit, Transducer Assembly, FM-1 80
l Transducer Assembly w/Connectors
0 Elbow, Male, l/4 Tube x l/4 NPT
l Paste, Teflon (PSNC)
l Connector, Male, 11’4 Tube x l/4 NPT
Ref
1
1
1
0 Nordson Corporabon 1992
All Rights Reserved
PIN 108 381A
41-180 11192
8-54 lllus tra ted Parts List
List of Service Items/Service Kits (continued)
Part No. Description Required
110 776 Service Kit, Reservoir, FM-180
Reservoir, Sealed
Tag, Warranty
900 413
941 521
940 111
940 161
945 026
972 006
973 543
984 204
983 140
983 503
945 158
981 451
900 419
900 344
.
l
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Sealant, Rubber, RTV, Red, 2.8 oz tube
O-ring, Viton, 3.25 x 3.438 x 0.094 in. ID (Pump OD)
O-ring, Viton, 0.313 x 3.438 x 0.063 in. ID (Pump Gas In)
O-ring, Viton, 0.625 x 0.75 x 0.063 in. ID (Pump Out and Pressure Out Ports)
O-ring, Viton, 1/4 Tube (Pressure Readout Fitting)
Connector, 37”, Hydraulic, 7/16-2O Straight Threads
Plug, O-ring, ‘/16-20 Straight Threads
Nut, Hex, High, 1/4-28
Lockwasher, Split
Washer, Flat, 0.218 x 0.625 x 0.125 in.
Nut, Hex, Jam, 3/B-16
Screw, Socket Set, 3/8-16 x 2.50 in.
Adhesive, Loctite No. 620 (PSNC)
Never Seez, 8 oz can
110 775
900 413
273 837
Service Kit, Grid, FM-180
l Grid, Sealed
l Tag, Warranty
l Sealant, Rubber, RTV, Red, 2.8 oz tube
l Insulator, Drive Support
365 420 Service Kit, EPROM, ROS Board Ref
l EPROM, Programmed 1
l l Software 1
l l EPROM 1
ii0 813 Service Kit, NV-RAM
153 197 Service Kit, Drive Bearing, FM-180
153 188 Service Kit, Thermostat
153 199 Service Kit, Drive Seal
153 203 Service Kit, Couplings
111 793 Service Kit, Brush, Motor Magnetek
111 794 Service Kit, Bearing, Front, Motor, Magnetek
111 791 Service Kit, Bearing, Rear, Motor, Magnetek
221 632 Service Kit, Brush, Motor, Ohio Electric
221 631 Service Kit, Brush and Front/Rear Bearing, Motor, Ohio Electric
271 765 Tool, Pump Removal
Ref
1
1
1
1
3
1
1
1
2
2
2
2
2
Ref
1
1
1
m 108 3aiE
41-180 it96
0 Nordson Corporation 1992
All Rights Reserved
SECTION 9
Specifications and Technical Data
1. FM-l 80 Applicator Specification Summary ................ 9-1
2. Component Electrical Current Requirements and
Heater Resistance Values ............................... 9-2
3. Material Safety Data Information ........................ 9-6
0 No&on Corporabon 1992 P/N 108 381A
AU Alghts Reserved 41-180 ii/92

Specifications and Technical Data
Section 9
Specifications and Technical Data
9-l
1. FM-180 Applicator
Specification Summary
Note that equipment specifications are subject to change without notice.
Type of System
Heating Elements:
Manifold
Reservoir
Grid
Hopper
Holding Capacity
Temperature Range:
Operating
Ambient
Temperature Stability
Out-of-Temperature
Range Warning (flashing display)
Melt Rate (may vary depending on hot melt material type
and/or viscosity)
Delivery Rate:
Maximum Continuous Delivery Rate; 50% density reduction
(MCDR)
Viscosity Range
Hose/Gun Capacity
Exterior Dimensions:
Height
Depth
Width
Weight
Electrical Requirements:
Amperage (minimum service)
Voltage (nominal service)
Air Supply Requirements:
(Run-up Control feature only)
Pressure
Type
Volume
Gas Supply Requirements:
Pressure
Type
Filter
Controller:
Type
Temperature Control Algorithm
Temperature Sensors
Temperature Control Channels
Circulating gear pump
Cast Strip (I)
Cast-In
Cast-In
Cast Strip (2)
60 lb (27 kg)
150’ - 4.OO”F (66’ - 204°C)
32’ - 120°F (0’ - 5O’C)
+/- 2°F
t/- 1O’F
Exceeds MCDR
55 Ibs/hr (25 kg/hr)
1,000 - 60,000 cps
12 Temperature Control Channels
(6 hose, 6 gun)
61 .O in. (1,549.4 mm)
24.0 in. (609 mm)
30.0 in. (762 mm)
350 Ibs., (158.7 kg)
50 amps
240 VAC
90 - 120 psi (620 - 830 kPa)
Dry
Negligible
30 - 50 psi (207 - 345 kPa)
Industrial-grade CO2 or NP
0.006 in. mesh (optional sizes available)
Hitachi 6303 microprocessor
PID/with pulse width modulation
Nickel FITD (120 ohm)
16
Q No&on Corporation 1992 P/N 108 381A
AU Rights Reserved 41-100 II/92
9-2 Specifications and Technical Data
I. FM-I 80 Applica for
Specification Summary
(continued)
Note that equipment specifications are subject to change without notice.
Display
Operator Interface
Digital temperature, pressure and pump speed readout. Keyed
lockout of temperature setpoints. 270-degree rotation of display.
Optional remote mounting kit for display.
Toggle switches for mode selections. Dial for temperature settings;
dials for pressure.
2. Component Electrical
Current Requirements and
Heater Resistance Values
The electrical current requirement for a FoamMelt 180 system is
determined by adding the current requirement of all the hoses and guns
to the current requirement of the unit.
Table 9.1 lists the current requirements for all the FM-1 80 hoses and
guns listed in Section 10. To determine the total current requirement for
your system, total up the requirements of the individual components
used in your system and add it to the current requirement of the unit.
Be sure to multiply the listed rating by the number of components
installed.
When doing this for the FM-l 80H, it is possible to reach a total current
greater than 50 amps (unit circuit breaker). This is acceptable up to 55
amps due to the fact that the motor is not operating while the unit is
heating up.
For special equipment built to customer order, refer to the electrical
information stamped on the component information plate. Use the
following formula to convert the information stamped on the plate to
current requirements.
Amps =
Nameplate Wattage
Voltage
NOTES: 1) THE TOTAL CURRENT REQUIREMENT OF YOUR
SYSTEM CANNOT EXCEIED 50 AMPS.
2) THE TOTAL CURRENT REQUIREMENT OF ANY SET OF 2
HOSES AND GUNS CANNOT EXCEED 10 AMPS
(HOSE 1 and 2 + GUN 1 and 2, OR
HOSE 3 and 4 + GUN 3 and 4, OR
HOSE 5 and 6 + GUN 5 and 6)
Table 9.1 also gives the resistance values of the heaters used in the
components listed in’section 10. These valves are given at 75°F
(24°C). They should be used for reference only when checking for open
heater circuits. Allow +/-15% for manufacturing tolerances.
Use the following formula to convert the nameplate information to
heater resistance values:
Resistance = (Voltage x Voltage)
Nameplate Watttage
0 Nordson Corporation 1992
All Rights Reserved
Specifications and Technical Data 9-3
Table 9.1 - Electrical Current and Resistance Values
Part No. Description Voltage Current Resistance
WC) (in Amperes at (in Ohms at
35O’F/l n’C) 75’F/24’C)
m Manifold, FM-l 80 240V 2.5 96.0
s Hopper, FM-l 80 240V 10.4* 23.0*
Grid, FM-l 80 240V 15.0 16.0
- Reservoir, FM-1 80 240V 9.4t 12.7+*
Motor, FM-l 80 s 9.3(at full load) 2.3
Unit, FM-l 80H (total) 240V 46.6 B
* Values are for the unit (2 heaters are used in parallel)
** Values are for the individual heater only; to determine total resistance, double this value
t Values are for the unit (2 heaters wired in series)
Automatic Hoses, FM-l 80, %s in. Diameter
274790 Hose, 2 ft.
274 791 Hose, 4 ft.
274792 Hose, 6 ft.
274793 Hose, 8 ft.
274794 Hose, 10 ft.
274795 Hose, 12 ft.
274796 Hose, 16 ft.
274797 Hose, 24 ft.
276 150 Hose, 2 ft.
276151 Hose, 4 ft.
276 152 Hose, 6 ft.
276 153 Hose, 8 ft.
276 154 Hose, 10 ft,
276 155 Hose, 12 ft.
276 156 Hose, 16 ft.
Automatic Hoses, FM-1 80, %I in. Diameter
111 094 Hose, 6 ft.
111 095 Hose, 10 ft.
111 096 Hose, 16 ft.
Automatic Hoses, Waterwash, FM-l 80
276739 Hose, 2 ft.
276740 Hose, 4 ft.
276741 Hose, 6 ft.
276742 Hose, 8 ft.
276743 Hose, 10 ft.
276744 Hose, 16 ft,
276745 Hose, 24 ft.
Biaxial Hose, Handgun
310525 Hose, 8 ft.
310526 Hose, 16 ft.
310527 Hose, 8 ft.
310528 Hose, 16 ft.
230V 0.20 1095
230V 0.46 510
230V 0.67 330
230V 0.89 240
230V 1.15 185
230V 1.37 155
230V 1.83 115
230V 2.76 75
2oov 0.23 830
2oov 0.50 390
2oov 0.78 250
2oov 1.03 180
2oov 1.33 140
2oov 1.58 115
2oov 2.10 85
240V
240V
240V
230V 0.20 1094
230V 0.43 511
230V 0.67 332
230V 0.90 239
230V 1.16 185
230V 1.83 113
230V 2.75 75
230V 0.62 361
230V 1.17 183
2oov 0.71 361
2oov 1.35 183
0.79
1.34
2.17
277
164
102
0 Nor&on Corporabon 1992
All RigMs Reserved
PIN 108 38lA
41-180 ii/92
9-4 Specifications and Technical Data
Table 9.1 - Electrical Current and Resistance Values (continued)
Part No. Description Voltage Current Resistance
WC) (in Amperes at (in Ohms at
SOoF/ 77%) 75’F/24’C)
Biaxial Hose, Automatic
101 296 Hose, 8 ft. 230V N/A N/A
101 767 Hose, 16 ft. 230V N/A N/A
101768 Hose, 8 ft. 2oov N/A N/A
101 769 Hose, 16 ft. 2oov N/A N/A
Hoses, Deadend and Swirl Spray Handgun
274798 Hose, 8 ft. 230V 0.96 240
274799 Hose, 16 ft. 230V 0.50 115
w Extrusion Guns, FM-l 80
860347 Gun, H201 S-T, 0.008 in. 230V 0.43 529
809 194 Gun, H2012-T, 0.008 in. 230V 0.65 374
809 195 Gun, H201Z-T, 0.012 in. 230V 0.65 374
809 196 Gun, H201 Z-T, 0.016 in. 230V 0.65 374
809 197 Gun, H201Z-T, 0.020 in. 230V 0.65 374
809 198 Gun, H201Z-T, 0.032 in. 230V 0.65 374
809 199 Gun, H201Z-T, 0.040 in. 230V 0.65 374
103 244 Gun, H202Z-T, 0.008 in. 230V 0.91 249
715 663 Gun, H202Z-T, 0.012 in. 230V 0.91 249
103 225 Gun, H202Z-T, 0.016 in. 230V 0.91 249
103 226 Gun, H202Z-T, 0.020 in. 230V 0.91 249
103 227 Gun, H202Z-T, 0.032 in. 230V 0.91 249
103228 Gun, H202Z-T, 0.040 in. 230V 0.91 249
103229 Gun, H204Z-T, 0.008 in. Close 230V 1.13 186
810114 Gun, H204Z-T, 0.012 in. Close 230V 1.13 186
809 921 Gun, H204Z-T, 0.016 in. Close 230V 1.13 186
103 230 Gun, H204Z-T, 0.020 in. Close 230V 1.13 186
103 231 Gun, H204Z-T, 0.032 in. Close 230V 1.13 186
103233 Gun, H204Z-T, 0.040 in. Close 230V 1.13 186
103234 Gun, H204Z-T, 0.008 in. Expanded 230V 1.52 148
103235 Gun, H204Z-T, 0.012 in. Expanded 230V 1.52 148
103236 Gun, H204Z-T, 0.016 in. Expanded 230V 1.52 148
103237 Gun, H204Z-T, 0.020 in. Expanded 230V 1.52 148
103238 Gun, H204Z-T, 0.032 in. Expanded 230V 1.52 148
103 239 Gun, H204Z-T, 0.040 in. Expanded 230V 1.52 148
Pm 100 3aw
41-180 II/92
0 Nordson Corporation 1992
Ati Rights h3SeNed
Specifications and Technical Data 9-5
Table 9.1 - Electrical Current and Resistance Values (continued)
Part No. Description Voltage
O/AC)
Current Resistance
(in Amperes at (in Ohms at
35O’F/177’C) 75’F/24’C)
Extrusion Guns, FM-l 80 (continued)
103 593 Gun, H208Z-T, 0.008 in. 230V 1.76 123
103 594 Gun, H208Z-T, 0.012 in. 230V 1.76 123
103 596 Gun, H208Z-T, 0.016 in. 230V 1.76 123
103 597 Gun, H208Z-T, 0.020 in. 230V 1.76 123
103 598 Gun, H208Z-T, 0.032 in. 230V 1.76 123
103 599 Gun, H208Z-T, 0.040 in. 230V 1.76 123
103 612 Gun, H201Z-TW, 0.008 in. 230V 0.65 355
103 613 Gun, H201 Z-TW, 0.012 in. 230V 0.65 355
103 614 Gun, H201Z-TVV, 0.016 in. 230V 0.65 355
103 615 Gun, H201Z-TW, 0.020 in. 230V 0.65 355
103 616 Gun, H201Z-TW, 0.032 in. 230V 0.65 355
103 617 Gun, H201Z-TW, 0.040 in. 230V 0.65 355
103 606 Gun, H202Z-lW, 0.008 in. 230V 0.98 234
103 607 Gun, H202Z-lW, 0.012 in. 230V 0.98 234
103 608 Gun, H202Z-lW, 0.016 in. 230V 0.98 234
103 609 Gun, H202Z-lW, 0.020 in. 230V 0.98 234
103 610 Gun, H202Z-TW, 0.032 in. 230V 0.98 234
103 611 Gun, H202Z-lW, 0.040 in. 230V 0.98 234
103 600 Gun, H204Z-TW, 0.008 in. 230V 1.22 191
103 601 Gun, H204Z-TW, 0.012 in, 230V 1.22 191
103 602 Gun, H204Z-PA/, 0.016 in. 230V 1.22 191
103 603 Gun, H204Z-TW, 0.020 in. 230V 1.22 191
103 604 Gun, H204Z-lW, 0.032 in. 230V 1.22 191
103 605 Gun, H204Z-IVV, 0.040 in. 230V 1.22 191
Handguns and Filter
274 765 Handgun, AD-31 T 230V 0.35 661
274 752 Handgun, AD-31T-L 2oov 0.40 500
310 653 Handgun, AD-31 FM 230V 0.26 699-
310 733 Handgun, AD-31 FM 2oov 0.30 650-
101 206 Handgun, AD-31 STR 230V 0.35 661
809 652 Heated In-Line Filter 230V 0.63 368
-These guns have 2 heaters in parallel. Resistance values are for a single heater. The resistance value, if read for the entire gun
will be I& the number shown
0 Nordson Corporation 1992
All Rghts Reserved
PIN 109 39lA
41-180 11192
9-6 Specifications and Technical Data
3. Material Safety Data
lnforma tion
I. IDENTlW
Product Name
Nordson Part No.
Chemical Name
II. HAZARDOUS INGREDIENTS
None
Ill. PHYSICAL DATA
Boiling Point
Vapor Pressure
Vapor Density
Water Solubility
Appearance and Odor
Percent Volatile by Volume
Evaporation Rate
Specific Gravity
IK FIREAND EXPLOSION HAZARD DATA
Flash Point
Extinguishing Media
Flammability Limits
Special Firefighting Procedures
Unusual Fire and Explosion Hazards
\I: HEALTH HAZARD DATA
Threshold Limit Value
Effects of Overexposure
Emergency First Aid Procedures:
Inhalation
Eye Contact
Skin Contact
Nordson Type R Solvent
270 755 (1 Gallon)
270 756 (5 Gallon)
270 757 (55 Glallon)
Adipate Polyester Plasticizer
>6OO”F (92.2%)
co.01 mm Hg (3 68°F (20°C)
N/A
Negligible .
Viscous, clear liquid
Mild, inoffensive odor
0%
Negligible
(Butyl Acetate = 1)
1.09
572°F (300°C) COC
CO2, Dry Chemical, Water Fog
Not Available
Wear MESA/NIOSH-approved, self-contained breathing
apparatus. Use water spray to cool fire-exposed containers.
Water may came frothing
Not determined by ACGIH
Liquid may cause mild eye irritation.
Repeated or prolonged skin contact may cause irritation. I
Move subject to fresh air.
Remove contact lenses. Hold eyelids away from eyeballs to
assure thorough rinsing. Flush eyes with large amounts of
water for at least 15 minutes. Consult physician if irritation
persists.
Wash affected skin areas with soap and water.
pm toa3am
41-180 11192
0 Nordson Corporation 1992
All Rights ReseNed
SDecifkations and Technical Data 9-7
3. Material Safety Data
lnforma tion
(continued)
VI. REACTlVlW DATA
Stability
Conditions to Avoid
lncompatability (materials to avoid)
Hazardous Decomposition Products
Hazardous Polymerization
Stable
None
Strong oxidizers
None under normal conditions of use. Oxides of carbon
when burned.
Will not occur.
VII. SPILL OR LEAK PROCEDURES
Steps to Be Taken If Material Released or Spilled
Waste Disposal Method
Dike and contain spill with inert material (sand, earth,
Fuller’s Earth, etc.) and transfer liquid and solid diking
materials tlo separate containers for recovery and disposal.
Wash floor with hot water and solution of “Oakite” or
equivalent,. Remove contaminated clothing and wash
before reuse. Wash affected skin areas with soap and
water. Keep spill out of sewers and open bodies of water.
Incinerate liquid in approved equipment.
Landfill contaminated diking materials according to current
local, state and federal regulations.
VIII. SPECLAL PROTECTION INFORMATION
Respiratory Protection
Ventilation
Protective Gloves
Eye Protection
Other
None required for normal operations
Normal room ventilation
Impervious
Do not wear contact lenses.
Splashgoggles (ANSI 287.1, 1979)
Eyewash facility
Impervious apron
IX. SPECIAL PRECAUTIONS
Precautions to Be Taken in Handling and Storage Stainless steel and aluminum are acceptable for storage.
Recommended storage temperature is 80°F (27°C).
Material freezes below 41 “F (5°C).
X. NFPA 704M RATINGS
Health Hazard 1
Flammability 2
Reactivity 0
Other Hazards None
0 Nordson Corporabon 1992
All Rights Reserved
PIN 108 38lA
41-180 ii/92

SECTION 10
Optional Parts and Equipment
FM-180 Hose Lists ..................................... 10-l
FM-180 Extrusion Gun Lists .............................. 10-3
Special Hose/Gun Equipment Lists ........................ 10-5
Accessory Equipment List ............................... 10-6
Kalrez O-Rings ........................................ 10-7
Kalrez Assemblies and Special Units ....................... 1 O-7
Q Nor&on Corporation 1992
All Rights Reserved
P/N 108 381A
41-10011/92

Optional Parts and Eauipment IO-1
Section 10
Optional Parts and Equipment
FM-180 Hose Lists
Part No. Description
Automatic Hoses, FM-l 80, %s in. Diameter
274 790 Hose, 2 ft., 230V
274 791 Hose, 4 ft., 230V
274 792 Hose, 6 ft., 230V
274 793 Hose, 8 ft., 230V
274 794 Hose, 10 ft., 230V
274 795 Hose, 12 ft., 230V
274 796 Hose, 16 ft., 230V
274 797 Hose, 24 ft., 230V
276 150 Hose, 2 ft., 200V
276 151 Hose, 4 ft., 200V
276 152 Hose, 6 ft., 200V
276 153 Hose, 8 ft., 200V
276 154 Hose, 10 ft., 200V
276 155 Hose, 12 ft., 200V
276 156 Hose, 16 ft., 200V
Automatic Hoses, FM-1 80, % in. Diameter
111 094 Hose, 6 ft., 230V
111 095 Hose, 10 ft., 230V
111 096 Hose, 16 ft., 230V
Automatic Hoses, Water Wash, FM-l 80, 5/rs in. Diameter
276 739 Hose, 2 ft., 230V
276 740 Hose, 4 ft., 230V
276 741 Hose, 6 ft., 230V
276 742 Hose, 8 ft., 230V
276 743 Hose, 10 ft., 230V
276 744 Hose, 16 ft., 230V
276 745 Hose, 24 ft., 230V
Biaxial Hoses, Handgun, s/is in. Diameter
310 525 Hose, 8 ft., 230V
310 526 Hose, 16 ft., 230V
310 527 Hose, 8 ft., 200V
310 528 Hose, 16 ft., 200V
8 Nordson Corporabon 1992
All Rights Reserved
P/N 108 381A
41-180 11192
IO-2 Optional Parts and Equipmet
FM-180 Hose Lists
(continued)
Part No. Description
Biaxial Hoses, Automatic, %s in. Diameter
101 296 Hose, 4 ft., 230V
101 767 Hose, 6 ft., 230V
101 768 Hose, 10 ft., 230V
101 769 Hose, 16 ft., 230V
Hoses, Deadend and Swirl Spray, Handgun, %rs in. Diameter
274 798 Hose, 8 ft., 230V
274 799 Hose, 16 ft., 230V
PM 108 381A
41-180 11/92
Q Nordson Corporation 1992
All Rights Reserved
Optional Parts and Eaubment 1 o-3
FM-180 Extrusion Gun Lists
Part No. Description
Automatic, Spray, Single-Module, H200* (contact your Nordson representative for required heat exchanger
options)
860 347 Gun, H201 S-T, 0.018 in., 230V
Automatic, Single-Module, Non-Circulating, Zero Cavityy, H200*
809 194 Gun, H20lZ-T, 0.008 in., 230V
809195 Gun, H201 Z-T, 0.012 in., 230V
809196 Gun, H20lZ-T, 0.016 in., 230V
809197 Gun, H20lZ-T, 0.020 in., 230V
809198 Gun, H20lZ-T, 0.032 in., 230V
809199 Gun, H20lZ-T, 0.040 in., 230V
Automatic, Multi-Module, Non-Circulating, Zero Cavity, H200*
103224 Gun, H202Z-T, 0.008 in., 230V
715663 Gun, H202Z-T, 0.012 in., 230V
103225 Gun, H202Z-T,0.016 in.,230V
103226 Gun, H202Z-T,0.020 in.,230V
103227 Gun, H202Z-T,0.032 in.,230V
103228 Gun, H202Z-T,0.040 in.,230V
103229 Gun, H204Z-T, 0.008 in., Close, 230V
810114 Gun, H204Z-T, 0.012 in., Close, 230V
809921 Gun, H204Z-T, 0.016 in., Close, 230V
103230 Gun, H204Z-T, 0.020 in., Close, 230V
103231 Gun, H204Z-T, 0.032 in., Close, 230V
103233 Gun, H204Z-T, 0.040 in., Close, 230V
Automatic, Multi-Module, Non-Circulating, Zero Cavity, H200*
103234 Gun, H204Z-T, 0.008 in., Expanded, 230V
103235 Gun, H204Z-T, 0.012 in., Expanded, 230V
103236 Gun, H204Z-T, 0.016 in., Expanded, 230V
103237 Gun, H204Z-T, 0.020 in., Expanded, 230V
103238 Gun, H204Z-T, 0.032 in., Expanded, 230V
103239 Gun, H204Z-T, 0.040 in., Expanded, 230V
103593 Gun, H208Z-T, 0.008 in., 230V
103594 Gun, H208Z-T,0.012 in.,230V
103596 Gun, H208Z-T,0.016 in.,230V
103597 Gun, H208Z-T,0.020 in.,230V
103598 Gun, H208Z-T, 0.032 in., 230V
103599 Gun, H208Z-T, 0.040 in., 230V
l Requires circulation block kit or gun installation kit; see Special Hose/Gun Equipment List in this section.
Q Nordson Corporation 1992
AU Rights Reserved
P/N 108 30lA
41-100 lll92
1 o-4 Optional Parts and EauiDmet
FM-180 Extrusion Gun Lists
(continued)
Part No. Description
Automatic, Water Wash, Single-Module Non-Circulating, Zero Cavity, H200*
103 612
103 613
103 614
103 615
103 616
103 617
-
103 606
103 607
103 608
103 609
103 610
103 611
103 600
103 601
103 602
103 603
103 604
103 605
Gun, H20lZ-TW, 0.008 in., 230V
Gun, H20lZ-lW, 0.012 in., 230V
Gun, H20lZ-lW, 0.016 in., 230V
Gun, H20lZ-lW, 0.020 in., 230V
Gun, H20lZ-TVV, 0.032 in., 230V
Gun, H20lZ-TW, 0.040 in., 230V
Automatic, Water Wash, Multi-Module, Non-Circulating, Zelro Cavity, H200*
Gun, H202Z-TW, 0.008 in., 230V
Gun, H202Z-TW, 0.012 in., 230V
Gun, H202Z-TVV, 0.016 in., 230V
Gun, H202Z-TVV, 0.020 in., 230V
Gun, H202Z-TW, 0.032 in., 230V
Gun, H202Z-TW, 0.040 in., 230V
Gun, H204Z-lW, 0.008 in., 230V
Gun, H204Z-TW, 0.012 in., 230V
Gun, H204Z-TVV, 0.016 in., 230V
Gun, H204Z-TW, 0.020 in., 230V
Gun, H204Z-lW, 0.032 in., 230V
Gun, H204Z-lW, 0.040 in., 230V
Handgun, Deadend*
274 765
274 752
AD-3lT, 230V (for s/s in. hose)
AD-3lT-L, 200V (for %s in. hose)
Handgun, Biaxial
310 653
310 733
AD-31 FM, 230V
AD-31 FM, 200V
Handgun, Swirl Spray+*
101 206 AD-31 STR, 230V
* Requires circulation block kit or gun installation kit; see Special Hose/Gun Equipment Lists in this section.
* Requires hose (P/N 274 791) hose/gun connector (P/N 310 226) and Viton o-ring (P/N 945 025); order one h/g connector
and o-ring per gun. Swirl Spray Handgun requires Air Line Kit (P/N 324 287).
Pm 108 38lA
41-180 11192 Q Nordson Corporation 1992
All Rights Reserved
Special Hose/Gun Equipment Lists
Optional Parts and Equipment IO-5
Part No. Deswiption
m Circulation Block Kits (use to connect hoses to guns with one hydraulic port)
310 787
310 788
310 789
310 790
310 791
310 792
Biaxial Hose, 90 degrees
Biaxial Hose, 45 degrees
Biaxial Hose, Straight-In
Standard Hose, 90 degrees
Standard Hose, 45 degrees
Standard Hose, Straight-In
- Kits, Installation, Gun (use if 2 hydraulic connections acre available on gun)
310 198 Kit, Installation, Gun, H200
Optional Hydraulic Fittings
972 628* Connector, Straight (gun to 5/16 in. diameter automatic hose)
719 024* Connector, Straight (gun to 5/i in. diameter automatic hose)
310 281+* Connector, Straight (applicator to s/16 in. diameter automatic hose)
719 023* Connector, Straight (applicator to % in. diameter automatic hose)
972 703 Connector, Straight (applicator to % in. diameter automatic hose, brass)
274 180 Connector, Elbow, 90 degrees (gun to %s in. diameter automatic hose)
274 179 Connector, Elbow, 45 degrees (gun to 5/s in. diameter automatic hose)
219 047 Connector, Elbow, 45 degrees (gun to % in. diameter automatic hose)
973 574 Plug, Pipe (extra port on gun)
973 384 Plug, Pipe (extra port on applicator)
Hose Extension Cords (use to power hoses mounted hydraulically between guns)
809 550 6 ft. Extension Cord
809 549 12 ft. Extension Cord
809 548 16 ft. Extension Cord
271 486 Hose Hanger Kit
274 724* Dust Cap Assembly (Replacement cap for %s in. diameter hose/gun connector)
901 915 Nozzle Cleaning Kit
901 515 Air Filter, 150 psi
901 254 Air Pressure Gauge (Use for air supply to gun)
901 028
901 050
3-Way Relay Valve, Air Piloted
Relay Valve
Installation Kit
* Shipped with each gun and each hose
. * Shipped with each hose
Q Nordson Corporation 1992 P/N 100 30lA
All Rights Reserved 41-180 lll92
IO-6 Optional Parts and Equipmet
Accessory Equipment List
Part No. Description
296 163 Encoder Kit, 500-Pulse
296 162 Encoder Kit, 200-Pulse
296 144 Friction Wheel, 0.50 meter circumference (use with either encoder kit)
719 025 Valve, Relief, 1,200 psi (for use with %I in. hoses)
809 057 Level Control
271 382 Gas Cylinder Installation Kit, Carbon Dioxide
273 170 Gas Cylinder Installation Kit, Nitrogen
310 136 Density Control Slug (high-viscosity)
310 864 Kit, Remote Operator Station
274 428 Hydraulic Pressure Gauge Kit
161 104
161 106
161 109
161 112
161 115
161 120
Hydraulic Filter Screens (optional applicator filter screens)
0.004 in. (0.10 mm) Mesh
0.006 in. (0.15 mm) Mesh
0.009 in. (0.23 mm) Mesh
0.012 in. (0.30 mm) Mesh
0.015 in. (0.38 mm) Mesh
0.020 in. (0.51 mm) Mesh
w Non-Heated In-Line Filter
274 290 Filter, Straight, 0.011 in. (0.28 mm) 50 Mesh
274 291 Filter, Straight, 0.006 in. (0.15 mm) 100 Mesh
274 292 Filter, Straight, 0.003 in. (0.008 mm) 200 Mesh
805 877 Filter, 45 degrees, 0.011 in. (0.28 mm) 50 Mesh
805 878 Filter, 45 degrees, 0.006 in. (0.15 mm) 100 Mesh
805 879 Filter, 45 degrees, 0.003 in. (0.08 mm) 200 Mesh
274 287 Filter, 90 degrees, 0.011 in. (0.28 mm) 50 Mesh
274 288 Filter, 90 degrees, 0.006 in. (0.15 mm) 100 Mesh
274 289 Filter, 90 degrees, 0.003 in. (0.08 mm) 200 Mesh
805 138 Filter Element, 0.028 in. (0.71 mm) 24 Mesh
271 598 Filter Element, 0.011 in. (0.28 mm) 50 Mesh
271 599 Filter Element, 0.006 in. (0.15 mm) 100 Mesh
271 600 Filter Element, 0.003 in. (0.08 mm) 200 Mesh
809 652 Filter, Heater In-Line
272 620 Arc Suppressor
901 515 Filter, Air, 150 psi
973 032 Nipple, Pipe, ‘1’4 NPT (use for run-up control air supply)
PM 108 381A
41-180 11192
(B Nordson Corporation 1992
All Rights Reserved
Optional Parts and Equipment 1 o-7
Kalrez O-Rings
Nordson Kalrez Assy. Nordson Kalrez O-Ring
P/N P/N O-Ring P/N P/N
Location Required
719 102
719 119
310 281 945 025 719 080 Processor-to-Hose Fittings (?/9 in.) 4
940 141 719 073
942 111 719 076
Run-up valve 2
1
310 229
940 090 719 123
941 161 719 074
Run-up valve actuator 1
2
310 316 719 120
940 121 709 774
945 032 719 079
Pressure relief valve 1
1
310 137 719 090
973 592 719 107 945 034 719 038 Manifold plug (V2 in.) 4
973 543 719 125 945 026 719 077 Manifold plug (7/16 in. 1
310 120 719 092
310 247+ 719 094
941 240 719 075 DC to manifold
940 121 709 774 DC (isolator-external)
940 181 719 072 DC (isolator-internal)
973 384 719 108 945 025 719 080 Manifold plug (?/a in.) 4
275 481* 719 122 940 111 710 742 Drain valve (3-hole) 1
275 288* 719 082 Drain valve (4-hole) 1
941 521 719 081 Pump OD
940 111 710 742 Gas inlet to pump
940 161 709 776 Manifold pressure gauge port
945 026 719 077 Pressure gauge fitting
* It is suggested that this assembly be ordered instead of the separate o-rings for this part.
**Assemblies are interchangeable.
Kalrez Assemblies and Special Units
Part No. Description
719 099 Kit, Pump Replacement
719 095 Kit, Manifold Replacement
6 Nordson Corporabon 1992 P/N 108 381A
AU Rights Reserved 41-180 Ill92

T 3000
Topper stirapantaloni con tendibacino e tendigambe pneumatico
Finishing topper for trousers with air-operated waistband and leg stretching
device
Topper pour le repassage des pantalons, avec tendeur bassin et jambes
pneumatique
Hosentopper mit pneumatisch gesteuerter Hosenbund- und
Hosenbeinspannung
Topper pantalón con tensor cajas y piernas neumático
TSP 1
Tavolo di spazzolatura per capi in pelle e nappati
Brushing table for leather and tassel garments
Table à brosser pour vêtements en cuir et en peau
Tisch für das Bürsten von Leder- und Nappawaren
Mesa de cepillado para prendas de piel y napa
PL 04
KRESTO
AEG    E92C101P+N    47
AEG    E92C201P+N    4
AEG    E94C10+D9410/030    4
AEG    E94C16+D9416/030    8
AEG    E94C20+D9420/030    16
AEG    E94C25+D9425/030    1
AEG    E94C32+D9425/030    10
AEG    E94C32+D9432/030    6
AEG    E94C40+D9440/030    2
AEG    E94C63+D9463/030    15
AEG    MCH609S3400E    2
AEG    ME09D31W20 Mpro20    1
AEG    ME09D41W001Mpro30+UEF    2
AEG    MML169N250    1
AEG    MML169N3160    5
AEG    MML169N3250    3
AEG    MML169N3400    2
AEG    MML169N3630    2
PIT
R1.2 max.
Flasher square, IP65
Product can differ from the current configuration. Dimensions [mm]
X = Screw terminal
Mounting cut-outs [mm]
PIT = Push-in terminal,
X = Screw terminal
Additional Information
• Housing plastic black
• Other terminal options from the part flasher element
and lamp block see «Accessories»
Equipment consisting of (schematic overview)
Lens page 121
Lens holder page 123
Actuator
Press frame
Bayonet flange page 134
LED page 150
Lamp block page 135
Flasher element page 133
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red components
from the pages shown.
Front bezel Part No. Weight
Flasher actuator square, Front dimension 35 x 35 mm
Plastic black 704.743.0 0.020 kg
Plastic silver 704.743.8 0.020 kg
04


NEVER-SEEZ





Home > MRO Industrial Supply Brands > Never-Seez
BRANDS
Anderson Mats
American Sealants
Archoil
B&W International Cases
Band-It
Bostik
C.H. Hanson
Cupran Hand Cleaner
Deb-Stoko Skin Care
Estesol Hand Cleaner
Flow Ezy Performance Filters
Gasoila Chemicals
Gedore Tools
Ideal Tridon
ITW Pro Brands
Kresto
Lab Metal
LPS Lubricants
Laco Markal Marking Products
Never-Seez
Omni Fill
Ochsenkopf Forestry
Greven Skin Care Solutions
Polymeric Systems
Epoxy Sticks
Premier Building Solutions
Schaeffer Oil Products
Silaprene Sealants
Scrubs In A Bucket
Solopol Hand Cleaner
Sprayon Lubricant Products
Tri-Flow Lubricants
TPI Industrial Fans and Heaters
Vibra-Tite
Wright Tool Company
Never-Seez
Bostik Never-Seez has been the leading manufacturer of anti-seize and lubricating compounds for over fifty years. A thread lubricant for nut and bolt assemblies, Never-Seez serves as a protective coating for metal parts that can withstand extended exposure to the elements. In addition, Neverseez minimizes friction, guards against seizures at high temperatures, prevents galling and protects against rust and corrosion. With a broad range of products to choose from including copper, nickel, marine and food grade lubricants, Never-Seez reduces the amount of torque required for threads, while maintaining the same clamping force. Excellent for use in high pressure and acidic environments, it is no wonder why Never-Seez has been recognized as the grease to beat by industry professionals everywhere.
Bostik Never Seez NSB-4<br>Regular Grade Anti-Seize<br>4 oz. Tube
Bostik Never Seez NSB-4
Regular Grade Anti-Seize
4 oz. Tube
10.99
DETAILS
Bostik Never Seez  NSBT-8 <br>Regular Grade Anti-Seize <br>8 oz. Brush Top Can
Bostik Never Seez NSBT-8
Regular Grade Anti-Seize
8 oz. Brush Top Can
16.99
DETAILS
Bostik Never Seez NSBT-16 <br>Regular Grade Copper Anti-Seize<br>16 oz. Brush Top Can
Bostik Never Seez NSBT-16
Regular Grade Copper Anti-Seize
16 oz. Brush Top Can
19.99
DETAILS
Bostik Never Seez NS-160 <br>Regular Grade Copper Anti-Seize<br> 1 lb. Flat Top Can
Bostik Never Seez NS-160
Regular Grade Copper Anti-Seize
1 lb. Flat Top Can
19.99
DETAILS
Bostik Never Seez NSA-16 <br>Regular Grade Copper Anti Seize<br>16 oz. Aerosol Can
Bostik Never Seez NSA-16
Regular Grade Copper Anti Seize
16 oz. Aerosol Can
22.49
DETAILS
Bostik Never Seez NSC-1<br> Regular Grade Copper Anti-Seize<br>1 lb. Cartridge
Bostik Never Seez NSC-1
Regular Grade Copper Anti-Seize
1 lb. Cartridge
24.99
DETAILS
Bostik Never Seez NS-168 <br> Regular Grade Anti-Seize<br>8 lb. Flat Top
Bostik Never Seez NS-168
Regular Grade Anti-Seize
8 lb. Flat Top
164.49
DETAILS
Free Ground Shipping
Bostik Never Seez NSBT-8N<br>Pure Nickel Special <br>8 oz. Brush Top Can
Bostik Never Seez NSBT-8N
Pure Nickel Special
8 oz. Brush Top Can
22.99
DETAILS
Bostik Never Seez NSBT-16N<br>Pure Nickel Special<br> 1 lb. Brush Top Can
Bostik Never Seez NSBT-16N
Pure Nickel Special
1 lb. Brush Top Can
29.99
DETAILS
Bostik Never Seez NSN-165<br>Pure Nickel Special<br>1 lb. Flat Top Can
Bostik Never Seez NSN-165
Pure Nickel Special
1 lb. Flat Top Can
34.99
DETAILS
Never Seez Nickel Nuclear Grade<br>NG-165 High Temp Anti-Seize<br> 1 lb. Flat Top Can
Never Seez Nickel Nuclear Grade
NG-165 High Temp Anti-Seize
1 lb. Flat Top Can
69.99
DETAILS
 Bostik Never Seez NPBT-16<br>Pipe Compound With PTFE<br>1 lb. Brush Top Can
Bostik Never Seez NPBT-16
Pipe Compound With PTFE
1 lb. Brush Top Can
24.49
DETAILS
Bostik Never Seez NPBT-8<br>Pipe Compound With PTFE<br> 8 oz. Brush Top Can
Bostik Never Seez NPBT-8
Pipe Compound With PTFE
8 oz. Brush Top Can
19.9917.99
DETAILS
Bostik Never Seez NSWT-14<br>White Food Grade With PTFE<br> 14 oz. Flat Top Can
Bostik Never Seez NSWT-14
White Food Grade With PTFE
14 oz. Flat Top Can
29.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSWT-1C<br>White Food Grade With PTFE<br>10.1 oz Cartridge
Bostik Never Seez NSWT-1C
White Food Grade With PTFE
10.1 oz Cartridge
29.99
DETAILS
Bostik Never Seez NSSBT-8<br>High Temperature Stainless<br>8 oz. Brush Top Can
Bostik Never Seez NSSBT-8
High Temperature Stainless
8 oz. Brush Top Can
17.99
DETAILS
Bostik Never Seez NSSBT-16<br>High Temperature Stainless<br>16 oz. Brush Top Can
Bostik Never Seez NSSBT-16
High Temperature Stainless
16 oz. Brush Top Can
31.99
DETAILS
Never Seez Black Moly<br>NSB-150 Extreme Pressure Grease<br>16 oz. Flat Top Can
Never Seez Black Moly
NSB-150 Extreme Pressure Grease
16 oz. Flat Top Can
34.9929.99
DETAILS
Bostik Never Seez NBBT-16<br> Blue Moly Anti-Seize<br>16 oz. Brush Top Can
Bostik Never Seez NBBT-16
Blue Moly Anti-Seize
16 oz. Brush Top Can
32.99
DETAILS
Bostik Never Seez NBBT-8<br>Blue Moly Anti-Seize<br>8 oz. Brush Top Can
Bostik Never Seez NBBT-8
Blue Moly Anti-Seize
8 oz. Brush Top Can
22.9919.99
DETAILS
Bostik Never Seez NHTC-14<br>High Temperature Bearing Lube<br> 14.1 oz. Cartridge
Bostik Never Seez NHTC-14
High Temperature Bearing Lube
14.1 oz. Cartridge
18.99
DETAILS
Bostik Never Seez NMCBT-8<br>Mariner's Choice (Marine Grade)<br>8 oz. Brush Top Can
Bostik Never Seez NMCBT-8
Mariner's Choice (Marine Grade)
8 oz. Brush Top Can
19.99
DETAILS
Free Ground Shipping
Bostik Never Seez NMCBT-16<br>Mariner's Choice (Marine Grade)<br>16 oz. Brush Top Can
Bostik Never Seez NMCBT-16
Mariner's Choice (Marine Grade)
16 oz. Brush Top Can
27.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSN-42B<br>Pure Nickel Special<br>42 lb. Pail
Bostik Never Seez NSN-42B
Pure Nickel Special
42 lb. Pail
1,079.99
DETAILS
Free Ground Shipping
Bostik Never Seez NS-42B<br> Regular Grade Anti-Seize<br> 42 lb. Pail
Bostik Never Seez NS-42B
Regular Grade Anti-Seize
42 lb. Pail
599.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSBT-8<br>Regular Grade Anti-Seize<br>8 oz. Brush Top Display
Bostik Never Seez NSBT-8
Regular Grade Anti-Seize
8 oz. Brush Top Display
214.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSA-16<br>Regular Grade Anti Seize<br>NSA Aerosol Can Display
Bostik Never Seez NSA-16
Regular Grade Anti Seize
NSA Aerosol Can Display
276.99
DETAILS
Free Ground Shipping
Sign up for our Newsletter!
Receive updates on the latest products and deals.


  SIGN UP
 
CUSTOMER SERVICE
About Us
Contact Us
Privacy
Service & Returns
My Account
View Cart
TESTIMONIALS
"Awesome experience with Jeff and his team. The Estimated delivery date was the 29th, and the product was delivered on the 27th. Great product knowledge! Would love to do more business with JD Industrial Supply in the future."
- Wesley Wren
Questions? Call: 734-426-2475

© Copyright 2019 JD Industrial Supply. All Right Reserved. Site Design by: EYStudios

Questions? Call: 734-426-2475 About Us Contact Us Shipping & Returns JDI Blog
CART
JD Industrial Supply

Search

Products


Brands

BAND-IT





KRESTO






NEVER-SEEZ





Home > MRO Industrial Supply Brands > Never-Seez
BRANDS
Anderson Mats
American Sealants
Archoil
B&W International Cases
Band-It
Bostik
C.H. Hanson
Cupran Hand Cleaner
Deb-Stoko Skin Care
Estesol Hand Cleaner
Flow Ezy Performance Filters
Gasoila Chemicals
Gedore Tools
Ideal Tridon
ITW Pro Brands
Kresto
Lab Metal
LPS Lubricants
Laco Markal Marking Products
Never-Seez
Omni Fill
Ochsenkopf Forestry
Greven Skin Care Solutions
Polymeric Systems
Epoxy Sticks
Premier Building Solutions
Schaeffer Oil Products
Silaprene Sealants
Scrubs In A Bucket
Solopol Hand Cleaner
Sprayon Lubricant Products
Tri-Flow Lubricants
TPI Industrial Fans and Heaters
Vibra-Tite
Wright Tool Company
Never-Seez
Bostik Never-Seez has been the leading manufacturer of anti-seize and lubricating compounds for over fifty years. A thread lubricant for nut and bolt assemblies, Never-Seez serves as a protective coating for metal parts that can withstand extended exposure to the elements. In addition, Neverseez minimizes friction, guards against seizures at high temperatures, prevents galling and protects against rust and corrosion. With a broad range of products to choose from including copper, nickel, marine and food grade lubricants, Never-Seez reduces the amount of torque required for threads, while maintaining the same clamping force. Excellent for use in high pressure and acidic environments, it is no wonder why Never-Seez has been recognized as the grease to beat by industry professionals everywhere.
Bostik Never Seez NSB-4<br>Regular Grade Anti-Seize<br>4 oz. Tube
Bostik Never Seez NSB-4
Regular Grade Anti-Seize
4 oz. Tube
10.99
DETAILS
Bostik Never Seez  NSBT-8 <br>Regular Grade Anti-Seize <br>8 oz. Brush Top Can
Bostik Never Seez NSBT-8
Regular Grade Anti-Seize
8 oz. Brush Top Can
16.99
DETAILS
Bostik Never Seez NSBT-16 <br>Regular Grade Copper Anti-Seize<br>16 oz. Brush Top Can
Bostik Never Seez NSBT-16
Regular Grade Copper Anti-Seize
16 oz. Brush Top Can
19.99
DETAILS
Bostik Never Seez NS-160 <br>Regular Grade Copper Anti-Seize<br> 1 lb. Flat Top Can
Bostik Never Seez NS-160
Regular Grade Copper Anti-Seize
1 lb. Flat Top Can
19.99
DETAILS
Bostik Never Seez NSA-16 <br>Regular Grade Copper Anti Seize<br>16 oz. Aerosol Can
Bostik Never Seez NSA-16
Regular Grade Copper Anti Seize
16 oz. Aerosol Can
22.49
DETAILS
Bostik Never Seez NSC-1<br> Regular Grade Copper Anti-Seize<br>1 lb. Cartridge
Bostik Never Seez NSC-1
Regular Grade Copper Anti-Seize
1 lb. Cartridge
24.99
DETAILS
Bostik Never Seez NS-168 <br> Regular Grade Anti-Seize<br>8 lb. Flat Top
Bostik Never Seez NS-168
Regular Grade Anti-Seize
8 lb. Flat Top
164.49
DETAILS
Free Ground Shipping
Bostik Never Seez NSBT-8N<br>Pure Nickel Special <br>8 oz. Brush Top Can
Bostik Never Seez NSBT-8N
Pure Nickel Special
8 oz. Brush Top Can
22.99
DETAILS
Bostik Never Seez NSBT-16N<br>Pure Nickel Special<br> 1 lb. Brush Top Can
Bostik Never Seez NSBT-16N
Pure Nickel Special
1 lb. Brush Top Can
29.99
DETAILS
Bostik Never Seez NSN-165<br>Pure Nickel Special<br>1 lb. Flat Top Can
Bostik Never Seez NSN-165
Pure Nickel Special
1 lb. Flat Top Can
34.99
DETAILS
Never Seez Nickel Nuclear Grade<br>NG-165 High Temp Anti-Seize<br> 1 lb. Flat Top Can
Never Seez Nickel Nuclear Grade
NG-165 High Temp Anti-Seize
1 lb. Flat Top Can
69.99
DETAILS
 Bostik Never Seez NPBT-16<br>Pipe Compound With PTFE<br>1 lb. Brush Top Can
Bostik Never Seez NPBT-16
Pipe Compound With PTFE
1 lb. Brush Top Can
24.49
DETAILS
Bostik Never Seez NPBT-8<br>Pipe Compound With PTFE<br> 8 oz. Brush Top Can
Bostik Never Seez NPBT-8
Pipe Compound With PTFE
8 oz. Brush Top Can
19.9917.99
DETAILS
Bostik Never Seez NSWT-14<br>White Food Grade With PTFE<br> 14 oz. Flat Top Can
Bostik Never Seez NSWT-14
White Food Grade With PTFE
14 oz. Flat Top Can
29.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSWT-1C<br>White Food Grade With PTFE<br>10.1 oz Cartridge
Bostik Never Seez NSWT-1C
White Food Grade With PTFE
10.1 oz Cartridge
29.99
DETAILS
Bostik Never Seez NSSBT-8<br>High Temperature Stainless<br>8 oz. Brush Top Can
Bostik Never Seez NSSBT-8
High Temperature Stainless
8 oz. Brush Top Can
17.99
DETAILS
Bostik Never Seez NSSBT-16<br>High Temperature Stainless<br>16 oz. Brush Top Can
Bostik Never Seez NSSBT-16
High Temperature Stainless
16 oz. Brush Top Can
31.99
DETAILS
Never Seez Black Moly<br>NSB-150 Extreme Pressure Grease<br>16 oz. Flat Top Can
Never Seez Black Moly
NSB-150 Extreme Pressure Grease
16 oz. Flat Top Can
34.9929.99
DETAILS
Bostik Never Seez NBBT-16<br> Blue Moly Anti-Seize<br>16 oz. Brush Top Can
Bostik Never Seez NBBT-16
Blue Moly Anti-Seize
16 oz. Brush Top Can
32.99
DETAILS
Bostik Never Seez NBBT-8<br>Blue Moly Anti-Seize<br>8 oz. Brush Top Can
Bostik Never Seez NBBT-8
Blue Moly Anti-Seize
8 oz. Brush Top Can
22.9919.99
DETAILS
Bostik Never Seez NHTC-14<br>High Temperature Bearing Lube<br> 14.1 oz. Cartridge
Bostik Never Seez NHTC-14
High Temperature Bearing Lube
14.1 oz. Cartridge
18.99
DETAILS
Bostik Never Seez NMCBT-8<br>Mariner's Choice (Marine Grade)<br>8 oz. Brush Top Can
Bostik Never Seez NMCBT-8
Mariner's Choice (Marine Grade)
8 oz. Brush Top Can
19.99
DETAILS
Free Ground Shipping
Bostik Never Seez NMCBT-16<br>Mariner's Choice (Marine Grade)<br>16 oz. Brush Top Can
Bostik Never Seez NMCBT-16
Mariner's Choice (Marine Grade)
16 oz. Brush Top Can
27.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSN-42B<br>Pure Nickel Special<br>42 lb. Pail
Bostik Never Seez NSN-42B
Pure Nickel Special
42 lb. Pail
1,079.99
DETAILS
Free Ground Shipping
Bostik Never Seez NS-42B<br> Regular Grade Anti-Seize<br> 42 lb. Pail
Bostik Never Seez NS-42B
Regular Grade Anti-Seize
42 lb. Pail
599.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSBT-8<br>Regular Grade Anti-Seize<br>8 oz. Brush Top Display
Bostik Never Seez NSBT-8
Regular Grade Anti-Seize
8 oz. Brush Top Display
214.99
DETAILS
Free Ground Shipping
Bostik Never Seez NSA-16<br>Regular Grade Anti Seize<br>NSA Aerosol Can Display
Bostik Never Seez NSA-16
Regular Grade Anti Seize
NSA Aerosol Can Display
276.99
DETAILS
Free Ground Shipping


BRANDS Anderson Mats American Sealants Archoil B&W International Cases Band-It Bostik C.H. Hanson Cupran Hand Cleaner Deb-Stoko Skin Care Estesol Hand Cleaner Flow Ezy Performance Filters Gasoila Chemicals Gedore Tools Ideal Tridon ITW Pro Brands Kresto Lab Metal LPS Lubricants Laco Markal Marking Products Never-Seez Omni Fill Ochsenkopf Forestry Greven Skin Care Solutions Polymeric Systems Epoxy Sticks Premier Building Solutions Schaeffer Oil Products Silaprene Sealants Scrubs In A Bucket Solopol Hand Cleaner Sprayon Lubricant Products Tri-Flow Lubricants TPI Industrial Fans and Heaters Vibra-Tite Wright Tool Company Never-Seez Bostik Never-Seez has been the leading manufacturer of anti-seize and lubricating compounds for over fifty years. A thread lubricant for nut and bolt assemblies, Never-Seez serves as a protective coating for metal parts that can withstand extended exposure to the elements. In addition, Neverseez minimizes friction, guards against seizures at high temperatures, prevents galling and protects against rust and corrosion. With a broad range of products to choose from including copper, nickel, marine and food grade lubricants, Never-Seez reduces the amount of torque required for threads, while maintaining the same clamping force. Excellent for use in high pressure and acidic environments, it is no wonder why Never-Seez has been recognized as the grease to beat by industry professionals everywhere. Bostik Never Seez NSB-4 Regular Grade Anti-Seize 4 oz. Tube 10.99 DETAILS Bostik Never Seez NSBT-8 Regular Grade Anti-Seize 8 oz. Brush Top Can 16.99 DETAILS Bostik Never Seez NSBT-16 Regular Grade Copper Anti-Seize 16 oz. Brush Top Can 19.99 DETAILS Bostik Never Seez NS-160 Regular Grade Copper Anti-Seize 1 lb. Flat Top Can 19.99 DETAILS Bostik Never Seez NSA-16 Regular Grade Copper Anti Seize 16 oz. Aerosol Can 22.49 DETAILS Bostik Never Seez NSC-1 Regular Grade Copper Anti-Seize 1 lb. Cartridge 24.99 DETAILS Bostik Never Seez NS-168 Regular Grade Anti-Seize 8 lb. Flat Top 164.49 DETAILS Bostik Never Seez NSBT-8N Pure Nickel Special 8 oz. Brush Top Can 22.99 DETAILS Bostik Never Seez NSBT-16N Pure Nickel Special 1 lb. Brush Top Can 29.99 DETAILS Bostik Never Seez NSN-165 Pure Nickel Special 1 lb. Flat Top Can 34.99 DETAILS Never Seez Nickel Nuclear Grade NG-165 High Temp Anti-Seize 1 lb. Flat Top Can 69.99 DETAILS Bostik Never Seez NPBT-16 Pipe Compound With PTFE 1 lb. Brush Top Can 24.49 DETAILS Bostik Never Seez NPBT-8 Pipe Compound With PTFE 8 oz. Brush Top Can 19.9917.99 DETAILS Bostik Never Seez NSWT-14 White Food Grade With PTFE 14 oz. Flat Top Can 29.99 DETAILS Bostik Never Seez NSWT-1C White Food Grade With PTFE 10.1 oz Cartridge 29.99 DETAILS Bostik Never Seez NSSBT-8 High Temperature Stainless 8 oz. Brush Top Can 17.99 DETAILS Bostik Never Seez NSSBT-16 High Temperature Stainless 16 oz. Brush Top Can 31.99 DETAILS Never Seez Black Moly NSB-150 Extreme Pressure Grease 16 oz. Flat Top Can 34.9929.99 DETAILS Bostik Never Seez NBBT-16 Blue Moly Anti-Seize 16 oz. Brush Top Can 32.99 DETAILS Bostik Never Seez NBBT-8 Blue Moly Anti-Seize 8 oz. Brush Top Can 22.9919.99 DETAILS Bostik Never Seez NHTC-14 High Temperature Bearing Lube 14.1 oz. Cartridge 18.99 DETAILS Bostik Never Seez NMCBT-8 Mariner's Choice (Marine Grade) 8 oz. Brush Top Can 19.99 DETAILS Bostik Never Seez NMCBT-16 Mariner's Choice (Marine Grade) 16 oz. Brush Top Can 27.99 DETAILS Bostik Never Seez NSN-42B Pure Nickel Special 42 lb. Pail 1,079.99 DETAILS Bostik Never Seez NS-42B Regular Grade Anti-Seize 42 lb. Pail 599.99 DETAILS Bostik Never Seez NSBT-8 Regular Grade Anti-Seize 8 oz. Brush Top Display 214.99 DETAILS Bostik Never Seez NSA-16 Regular Grade Anti Seize NSA Aerosol Can Display 276.99 DETAILS Sign up for our Newsletter! Receive updates on the latest products and deals. SIGN UP CUSTOMER SERVICE About Us Contact Us Privacy Service & Returns My Account View Cart TESTIMONIALS "Awesome experience with Jeff and his team. The Estimated delivery date was the 29th, and the product was delivered on the 27th. Great product knowledge! Would love to do more business with JD Industrial Supply in the future." - Wesley Wren Questions? Call: 734-426-2475 © Copyright 2019 JD Industrial Supply. All Right Reserved. Site Design by: EYStudios Questions? Call: 734-426-2475 About Us Contact Us Shipping & Returns JDI Blog CART Products Brands BAND-IT KRESTO NEVER-SEEZ Home > MRO Industrial Supply Brands > Never-Seez BRANDS Anderson Mats American Sealants Archoil B&W International Cases Band-It Bostik C.H. Hanson Cupran Hand Cleaner Deb-Stoko Skin Care Estesol Hand Cleaner Flow Ezy Performance Filters Gasoila Chemicals Gedore Tools Ideal Tridon ITW Pro Brands Kresto Lab Metal LPS Lubricants Laco Markal Marking Products Never-Seez Omni Fill Ochsenkopf Forestry Greven Skin Care Solutions Polymeric Systems Epoxy Sticks Premier Building Solutions Schaeffer Oil Products Silaprene Sealants Scrubs In A Bucket Solopol Hand Cleaner Sprayon Lubricant Products Tri-Flow Lubricants TPI Industrial Fans and Heaters Vibra-Tite Wright Tool Company Never-Seez Bostik Never-Seez has been the leading manufacturer of anti-seize and lubricating compounds for over fifty years. A thread lubricant for nut and bolt assemblies, Never-Seez serves as a protective coating for metal parts that can withstand extended exposure to the elements. In addition, Neverseez minimizes friction, guards against seizures at high temperatures, prevents galling and protects against rust and corrosion. With a broad range of products to choose from including copper, nickel, marine and food grade lubricants, Never-Seez reduces the amount of torque required for threads, while maintaining the same clamping force. Excellent for use in high pressure and acidic environments, it is no wonder why Never-Seez has been recognized as the grease to beat by industry professionals everywhere. Bostik Never Seez NSB-4 Regular Grade Anti-Seize 4 oz. Tube 10.99 DETAILS Bostik Never Seez NSBT-8 Regular Grade Anti-Seize 8 oz. Brush Top Can 16.99 DETAILS Bostik Never Seez NSBT-16 Regular Grade Copper Anti-Seize 16 oz. Brush Top Can 19.99 DETAILS Bostik Never Seez NS-160 Regular Grade Copper Anti-Seize 1 lb. Flat Top Can 19.99 DETAILS Bostik Never Seez NSA-16 Regular Grade Copper Anti Seize 16 oz. Aerosol Can 22.49 DETAILS Bostik Never Seez NSC-1 Regular Grade Copper Anti-Seize 1 lb. Cartridge 24.99 DETAILS Bostik Never Seez NS-168 Regular Grade Anti-Seize 8 lb. Flat Top 164.49 DETAILS Bostik Never Seez NSBT-8N Pure Nickel Special 8 oz. Brush Top Can 22.99 DETAILS Bostik Never Seez NSBT-16N Pure Nickel Special 1 lb. Brush Top Can 29.99 DETAILS Bostik Never Seez NSN-165 Pure Nickel Special 1 lb. Flat Top Can 34.99 DETAILS Never Seez Nickel Nuclear Grade NG-165 High Temp Anti-Seize 1 lb. Flat Top Can 69.99 DETAILS Bostik Never Seez NPBT-16 Pipe Compound With PTFE 1 lb. Brush Top Can 24.49 DETAILS Bostik Never Seez NPBT-8 Pipe Compound With PTFE 8 oz. Brush Top Can 19.9917.99 DETAILS Bostik Never Seez NSWT-14 White Food Grade With PTFE 14 oz. Flat Top Can 29.99 DETAILS Bostik Never Seez NSWT-1C White Food Grade With PTFE 10.1 oz Cartridge 29.99 DETAILS Bostik Never Seez NSSBT-8 High Temperature Stainless 8 oz. Brush Top Can 17.99 DETAILS Bostik Never Seez NSSBT-16 High Temperature Stainless 16 oz. Brush Top Can 31.99 DETAILS Never Seez Black Moly NSB-150 Extreme Pressure Grease 16 oz. Flat Top Can 34.9929.99 DETAILS Bostik Never Seez NBBT-16 Blue Moly Anti-Seize 16 oz. Brush Top Can 32.99 DETAILS Bostik Never Seez NBBT-8 Blue Moly Anti-Seize 8 oz. Brush Top Can 22.9919.99 DETAILS Bostik Never Seez NHTC-14 High Temperature Bearing Lube 14.1 oz. Cartridge 18.99 DETAILS Bostik Never Seez NMCBT-8 Mariner's Choice (Marine Grade) 8 oz. Brush Top Can 19.99 DETAILS Bostik Never Seez NMCBT-16 Mariner's Choice (Marine Grade) 16 oz. Brush Top Can 27.99 DETAILS Bostik Never Seez NSN-42B Pure Nickel Special 42 lb. Pail 1,079.99 DETAILS Bostik Never Seez NS-42B Regular Grade Anti-Seize 42 lb. Pail 599.99 DETAILS Bostik Never Seez NSBT-8 Regular Grade Anti-Seize 8 oz. Brush Top Display 214.99 DETAILS Bostik Never Seez NSA-16 Regular Grade Anti Seize NSA Aerosol Can Display 276.99 DETAILS Sign up for our Newsletter! Receive updates on the latest products and deals. SIGN UP CUSTOMER SERVICE About Us Contact Us Privacy Service & Returns My Account View Cart TESTIMONIALS "Awesome experience with Jeff and his team. The Estimated delivery date was the 29th, and the product was delivered on the 27th. Great product knowledge! Would love to do more business with JD Industrial Supply in the future." -

GE Multilin UR RHH
ARHC077011691 1
UR 9AH
A9AC04007019 1
RECEIVER (OLD) PART NO. : 751AM1NAB
  V421 CA401
V421CA1 02
V481CA451
V481CA112
CIENTIFIC SYSTEMS    OVERLOAD RELAY\型号:4863-193 EECB\设备名称:CONDENSING UNIT CONTROL PANEL   
SEQUENCE TIMER\型号:HK35AA009\设备名称:CONDENSING UNIT CONTROL PANEL     
SOLENOID VALVE COIL\型号:R23MM120V\设备名称:CONDENSING UNIT CONTROL PANEL     
CONTACTOR\型号:P282-0632\设备名称:CONDENSING UNIT CONTROL PANEL     
CONTROL RELAY\型号:HN61KK912\设备名称:CONDENSING UNIT CONTROL PANEL
V51 1CA501
V511CA 122
V57 1CA551
V571CA 142
V661CA601
V661CA152
V751CA701
V751CA172
V881CA851
V881CA212
Vi12CA1 03
V11 2CA252
V142CA332
V172CA402
V202CA502
V242CA572.
V282CA652
V13 OPA20A
V1 30PA20C
V130HE150
V1 50PA20A,
V1 50PA20C
V1 50HE1 50
V250PA40A
V250PA4 0C
V250HE250
V275PA40A
V275PA40C
V27 5HE250
V320PA40A
V320PA40C
V320HE300
V420PA40A
V420PA40C
V420HE400
V480PA80A
V480PA80C
V480HE450
V51 OPA80A
V51 0PA80C
V51 OHE500
V57 5PA80A
V575PA80C
V575HE550
V660PA1 00A
V660PA100C :
V660HE600
V750HE700
V1 30LA1
V1 30LA2
V130LA10A
V130LA20A
V130LA20B
V1 50LA1
V150LA2 :
V1 50LA10A
V150LA20A
V1 50LA20B
V250LA2
V250LA4
V250LA20A
V250LA40A
V250LA40B
V275LA2 :
V275LA4
V275LA20A
V275LA40A
V275LA40B
V300LA2
V300LA4
V320LA20A
V320LA40B
V420LA20A
V420LA40B
V480LA40A
V480LA80B
V51 0LA40A
V51 0LA80B
V575LA40A
V575LA80B
V1 000LA80A
V1 000LA160B
V12ZA1
V18ZA1
V18ZA3 ,
V1 8ZA40
V22ZA 1
V22ZA3
V24ZA50
V272A1
V272A4
V272A60
V332A 1
V33ZA5
V33ZA70
V36ZA80
V39ZA 1
V39ZA6.
V472A1
V472A7
V56ZA2
V56ZA8
V68ZA2
V68ZA10
V822A2
V82ZA12
V1 00ZA3
V1 00ZA15
V120ZA1
V120ZA6
V1 50ZA1
V150ZA8
V1 80ZA1
V1 802A1 0
V1 8MA1B
V22MA1B
V27MA1B
V33MA1A
V33MA1 B
V39 MA2A
V39MA2B
V47MA2A
V47MA2B
V56MA2A
V56MA2B
V68MA3A
V68MA3B
V82MA3A
V82MA3B
V1 00MA4A
V1 00MA4B
V1 20MA1A
V120MA2B
V150MA1A
V1 50MA2B
V1 80MA1A
V1 80MA3B
V220MA2A
V220MA4B
V270MA2A
V27 0MA4 B
V330MA2A
V330MA5B
V390MA3A
V390MA6B
V43 0MA3A
V43 0MA7B
V1 B2A1
V18ZA3
V22ZA1
V22ZA3
V24ZA1
V24ZA4
V27ZA1
V272A4
V33ZA1
V33ZA5
V39ZA1
V39ZA6
V47ZA1
V47ZA7
V56ZA2
V56ZA8
V68ZA2
V68ZA10
V82ZA2
V82ZA12
V100ZA3
V100ZA15
V1 20ZA1
V1 20ZA6
V150ZA1
V150ZA8
V180ZA1
V180ZA10
V18ZA1
V18ZA3
V22ZA1
V22ZA3
V24ZA1
V24ZA4
V27ZA1
V27ZA4
V33ZA1
V33ZA5
V39ZA1
V39ZA6
V47ZA1
V47ZA7
V56ZA2
V56ZA8
V68ZA2
V68ZA10
V82ZA2
V82ZA12
V100ZA3
V1 00ZA15
V120ZA1
V120ZA6
V1502A1
V150ZA8
V1 80ZA1
V180ZA10
V18 ZA1
1 8Z1
V18ZA3
V18ZA3
V22ZA1
22Z1
V22ZA3
V22ZA3
V24ZA1
24Z1
V24ZA4
V24ZA4
V27ZA1 :
27Z1
V27ZA4
V27ZA4
V33ZA1
33Z1
V33ZA5
V33ZA5
V39ZA1
39Z1
V39ZA6
V39ZA6 :
V47ZA1
47Z1
V47ZA7
V47ZA7
V56ZA2
56Z2
V56ZA8
V56ZA8
V68ZA2
68Z2
V68ZA10
V68ZA10
V82ZA2
82Z2
V82ZA1 2
V82ZA12
V1 00ZA3
100Z
V1 00ZA15
V100ZA15
V120ZA1
120Z
V120ZA6
V1 20ZA6
V1 50ZA1
1 50Z
V150ZA8
V1 50ZA8
V180ZA1
180Z
V180ZA1 0
V1 80ZA10

      GE Industrial BSLR2K RC Control Circuit Transient Voltage Suppressor Block 50 - 127-Volt AC    (NEW) PART NO. : MN751AM7E5BC
RANGE : 0-15000 RPM.
MN 751 : REMOTE SIGNAL INDICATOR
A             : INPUT SIGNAL 4-20 MA DC
M7(1)    : SPECIAL SCALE LCD DISPLAY RPM 0 TO 15000
E5           : FM EXPLOSION PROOF
SS-01 E. Trench 1.0 20-Jun-17 <1.0 39 72 111
SS-02 E. Trench 1.5 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-03 E. Trench 5.0 20-Jun-17 <1.0 140 92 232
SS-04 E. Trench 7.5 20-Jun-17 10 45 17 62
SS-05 W. Trench 1.0 20-Jun-17 <1.0 38 85 123
SS-06 W. Trench 5.0 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-07 W. Trench 6.5 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-08 S. Trench 1.0 20-Jun-17 <1.0 35 69 104
SS-09 S. Trench 5.0 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-10 S. Trench 1.0 20-Jun-17 <1.0 42 84 126
SS-11 S. Trench 4.5 20-Jun-17 <1.0 37 72 109
DISPENSER-1 Dispensers 1.0 20-Jun-17 <1.0 100 140 240
DISPENSER-2 Dispensers 5.0 20-Jun-17 2.7 71 35 106
N024682-012B DISPENSER-1 6/20/2017 8:50:00 AM 6/28/2017 Soil EPA 3546 Microwave Extraction WS
6/28/2017 EPA 6010B TOTAL METALS BY ICP WS
6/28/2017 EPA 8015B DIESEL & MOTOR OIL RANGE
ORGANICS BY GC/FID
WS
6/28/2017 EPA 8270CSIM SEMIVOLATILE ORGANIC
COMPOUNDS BY GC/MS-SIM
General Electric - V130LAX719 - MOV. 130V.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV, metal oxide varistor. Working voltage: 130V. MA Series. Package: axial leads. Dimensions: 3.6mm D x 8.2mm long. Note: Transient surge suppressor. Learn More
General Electric - V130LA1 - MOV. 130VAC 175VDC 11J.
General Electric - V130LA1 - MOV. 130VAC 175VDC 11J.
0.65
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV, metal oxide varistor. Working voltage: 130VAC, 175VDC. 11 Joules. Dimensions: 7mm disc. Note: Device branding 1301. Transient surge suppressor. Learn More
General Instruments - SA15A - Diode. TVS. 15V 500W.
General Instruments - SA15A - Diode. TVS. 15V 500W.
0.35
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode. TVS, transient voltage suppressor. 15V 500 watt. Test current 1Amp. Package: DO-15 (DO-204AC) axial leads. Learn More
General Electric - V12ZA1 - MOV. 6VAC 8VDC 0.6 Joules.
General Electric - V12ZA1 - MOV. 6VAC 8VDC 0.6 Joules.
0.34
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV, metal oxide varistor. 6VAC 8VDC 0.6 Joules. Package: radial leads. Dimensions: 7mm disc. Transient surge suppressor. Learn More
General Electric - V150LA20A MIL - MOV. 150VRMS 200VDC 80Joules.
- 25%   
General Electric - V150LA20A MIL - MOV. 150VRMS 200VDC 80Joules.
Special Price2.99 Regular Price 3.99
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV, transient surge supressor. 150VRMS 200VDC 80Joules.Case: 20mm D, radial leads. Military 5905-00-524-5794. Learn More
General Instruments - SMBG33A - 600W 33V TVS T&R SMD
General Instruments - SMBG33A - 600W 33V TVS T&R SMD
0.49
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
SMD T&R 600W 33V 5% Uidirectional TRANSZORB - Transient Voltage Suppressor Learn More
General Instruments - 1.5KE100 - Diode, TVS. 100V 1500W.
General Instruments - 1.5KE100 - Diode, TVS. 100V 1500W.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diodes, TVS. 100VBR, 1500Watt, 90 min, 110 max VBR @ 1ma. DO-201 axial leads. Cross: 1N6295. Learn More
General Instruments - 1.5KE27CA - Diode, TVS. 27V 1500W.
General Instruments - 1.5KE27CA - Diode, TVS. 27V 1500W.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode, transient voltage suppressor. Voltage: 27V. Power 1500 Watt. Package: DO-41A axial leads. Operating temperature: -65 to 175 Deg C. Learn More
General Electric - V420LB40B - MOV. 420Vrms, 695VAC peak.
General Electric - V420LB40B - MOV. 420Vrms, 695VAC peak.
9.95
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV. 420Vrms, 695VAC peak 50-60Hz, 40 joules. Dimensions: 9.5mm x 21.5mm D with radial leads 6.5mm spacing. Learn More
General Electric - V36ZA80 - New radial MOV 20mm 23Vac 31Vdc
General Electric - V36ZA80 - New radial MOV 20mm 23Vac 31Vdc

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
New radial MOV 20mm 23Vac 31Vdc See spec for Joules Learn More
General Electric - V320LA20A - MOV. 320VAC 77J.
General Electric - V320LA20A - MOV. 320VAC 77J.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV, metal oxide varistor. 320VAC, 420VDC. Clamping voltage: 850V. Surge energy: 77 Joules. Package: radial disc. Dimensions: 14mm D. Note: GE is Harris Semi. Learn More
General Instruments - 1.5KE68-1 HOUSE - TVP. 68V 1500W.
General Instruments - 1.5KE68-1 HOUSE - TVP. 68V 1500W.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Transient voltage suppression, diode. 68V 1500 watt. Package: DO-201AE axial leads. Note: Marked 6712K.

Learn More
General Instruments - 1.5KE200CA - Diode, TVS. 171V 1500W.
General Instruments - 1.5KE200CA - Diode, TVS. 171V 1500W.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode, transient voltage suppressor. Voltage: 171V. Power 1500 Watt. Package: DO-41A axial leads. Operating temperature: -65 to 175 Deg C. Learn More
General Instruments - 1.5KE220CA - Diode, TVS. 220VBR, 1500Watt. Used.
General Instruments - 1.5KE220CA - Diode, TVS. 220VBR, 1500Watt. Used.
0.25
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode, TVS. 220VBR, 1500Watt, 198 min, 242 max VBR @ 1ma. DO-201 axial leads. Used cut 1/4" leads. Learn More
General Instruments - P4KE51C - Diode, TVS. 43.6V 400 watt.
General Instruments - P4KE51C - Diode, TVS. 43.6V 400 watt.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode. TVS, transient voltage suppressor. 43.6VRWM 400 watt. Package: axial leads. New. Note: Silicon avalanche diodes.

Learn More
General Electric - V420LA20A - MOV. 420VAC 560VDC 90 Joules.
- 21%   
General Electric - V420LA20A - MOV. 420VAC 560VDC 90 Joules.
Special Price0.79 Regular Price 1.00
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV, metal oxide varistor. 420VAC 560VDC 90 Joules. Package: radial disc 14mm. Learn More
General Electric - V150PA10A - MOV. 150VRMS 195VDC.
General Electric - V150PA10A - MOV. 150VRMS 195VDC.
11.50
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
MOV, metal oxide varistor. 150VRMS 195VDC. Energy: 10 Joules. Mount: surface/flush. Learn More
General Instruments - SMBJ28CA - Diode, TVP. 28V 600Watt.
General Instruments - SMBJ28CA - Diode, TVP. 28V 600Watt.
0.10
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode, TVP. Transient voltage suppressors. Bi-directional. Voltage: 28V. Power/dissipation: 600 Watt peak pulse. Package: SMD DO-214, molded plastic. Marked MG 6J / GI. Learn More
General Instruments - SA15A - Diode. TVS. 15V 500W.
General Instruments - SA15A - Diode. TVS. 15V 500W.
0.35
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode. TVS, transient voltage suppressor. 15V 500 watt. Test current 1Amp. Package: DO-15 axial leads. Learn More
General Instruments - 1.5KE440CA - Diode, TVS. 440V 1500W.
General Instruments - 1.5KE440CA - Diode, TVS. 440V 1500W.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode, transient voltage suppressor. Voltage: 440V. Power 1500 Watt. Package: DO-41A axial leads. Operating temperature: -65 to 175 Deg C. Learn More
General Instruments - 1.5KE12A - Diodes, TVS. 12VBR, 1500Watt.
General Instruments - 1.5KE12A - Diodes, TVS. 12VBR, 1500Watt.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diodes, TVS. 12VBR, 1500Watt, 11.4min, 12.6max @ 1ma. DO-201 axial leads. Cross: Double marked 1N6273A. Learn More
General Instruments - 1.5KE8.2C - Diodes, TVS. 8.2VBR, 1500 watt. Package of 10.
General Instruments - 1.5KE8.2C - Diodes, TVS. 8.2VBR, 1500 watt. Package of 10.
3.00
Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diodes, TVS. Transient voltage suppressors. 8.2VBR, 1500 watt, 7.38 min, 9.02 max VBR @ 10ma. Package of 10. Learn More
General Instruments - 1.5KE51A - Diode, TVS. 51V 1500W.
General Instruments - 1.5KE51A - Diode, TVS. 51V 1500W.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode, transient voltage suppressor. Voltage: 51V. Power 1500 Watt. Package: DO-41A axial leads. Operating temperature: -65 to 175 Deg C. Learn More
General Instruments - 1.5KE220C - Diode, TVS. 220VBR, 1500W.
General Instruments - 1.5KE220C - Diode, TVS. 220VBR, 1500W.

Add to Cart
 ADD TO WISH LIST ADD TO COMPARE
Diode, TVS. 220VBR, 1500Watt, 198 min, 242 max VBR @ 1ma. Case: DO-201 axial leads. Learn More
6/28/2017 EPA 3550B SHAKE-OUT METHOD:
EXTRACTABLE FUELS
WS
N024682-013A DISPENSER-2 6/20/2017 9:00:00 AM 6/28/2017 EPA 8015B GASOLINE RANGE ORGANICS BY
GC/FID
VS
6/28/2017 EPA 8260B VOLATILE ORGANIC COMPOUNDS BY
GC/MS
VS
N024682-013B 6/28/2017 EPA 3050B SOPREP TOTAL METALS WS
6/28/2017 EPA 3546 Microwave Extraction WS
6/28/2017 EPA 6010B TOTAL METALS BY ICP WS
6/28/2017 EPA 8015B DIESEL & MOTOR OIL RANGE
ORGANICS BY GC/FID
WS
6/28/2017 EPA 8270CSIM SEMIVOLATILE ORGANIC
COMPOUNDS BY GC/MS-SIM
WS
6/28/2017 EPA 3550B SHAKE-OUT METHOD:
EXTRACTABLE FUELS
WS
N024682-014A FOLDER 6/28/2017 6/28/2017 Folder Folder LAB
6/28/2017 QA Review LAB
6/28/2017 Folder Folder LAB
SS-01 E. Trench 1.0 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 0.016 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
SS-02 E. Trench 1.5 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
SS-03 E. Trench 5.0 20-Jun-17 0.26 0.16 <0.05 <0.005 <0.005 <0.005 <0.005 <0.005 0.005 <0.005 <0.05 0.017 <0.005 0.026 0.0095
SS-04 E. Trench 7.5 20-Jun-17 1.3 2.4 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 0.008 <0.005 0.6 0.0065
SS-05 W. Trench 1.0 20-Jun-17 <0.005 <0.005 <0.005 <0.005 0.0085 0.005 0.012 <0.005 0.011 <0.005 <0.005 0.015 <0.005 <0.005 0.017
SS-06 W. Trench 5.0 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
SS-07 W. Trench 6.5 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
SS-08 S. Trench 1.0 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
SS-09 S. Trench 5.0 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
SS-10 S. Trench 1.0 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
SS-11 S. Trench 4.5 20-Jun-17 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
DISPENSER-1 Dispensers 1.0 20-Jun-17 0.052 0.02 <0.005 <0.005 <0.005 <0.05 <0.05 <0.05 0.008 <0.05 <0.005 0.01 <0.05 0.008 0.011
DISPENSER-2 Dispensers 5.0 20-Jun-17 0.16 0.04 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 0.025 <0.00
JH 6 G plus JH 10 G plus JH10 G plus ku
01 060 102-G 01 100 102-G 01 100 103-G ku
JH 6 G plus JH 10 G plus JH 10 G plus ku
SS-01 E. Trench 1.0 20-Jun-17 <1.0 39 72 111
SS-02 E. Trench 1.5 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-03 E. Trench 5.0 20-Jun-17 <1.0 140 92 232
SS-04 E. Trench 7.5 20-Jun-17 10 45 17 62
SS-05 W. Trench 1.0 20-Jun-17 <1.0 38 85 123
SS-06 W. Trench 5.0 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-07 W. Trench 6.5 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-08 S. Trench 1.0 20-Jun-17 <1.0 35 69 104
SS-09 S. Trench 5.0 20-Jun-17 <1.0 <10.0 <10.0 <10.0
SS-10 S. Trench 1.0 20-Jun-17 <1.0 42 84 126
SS-11 S. Trench 4.5 20-Jun-17 <1.0 37 72 109
DISPENSER-1 Dispensers 1.0 20-Jun-17 <1.0 100 140 240
DISPENSER-2 Dispensers 5.0 20-Jun-17 2.7 71 35 106
100 100 100 100
JH 15 G plus JH 20 G plus
7
JH 15 G plus JH 20 G plus
01 150 102-G 01 200 102-G
Type Sketch
Full load capacity* kg ⁄ lbs 6000 ⁄ 13200 10000 ⁄ 22000 10000 ⁄ 22000
Stroke mm ⁄ in 140 ⁄ 5.5“ 150 ⁄ 5.9“ 108 ⁄ 4.3“
Minimum lift toe height h 1 mm ⁄ in 12 ⁄ 0.5“ 15 ⁄ 0.6“ 15 ⁄ 0.6“
Maximum lift toe height h 2 mm ⁄ in 157 ⁄ 6.2“ 180 ⁄ 7.1“ 138 ⁄ 5.4“
Lift toe adjustment V mm ⁄ in 6x29 ⁄ 1.1“ 5 x41 ⁄ 1.6“ 4 x41 ⁄ 1.6“
Top plate height H 1 mm ⁄ in 245 ⁄ 9.6“ 275 ⁄ 10.8“ 235 ⁄ 9.3“
Toe width front L b mm ⁄ in 50 ⁄ 2.0“ 60 ⁄ 2,4“ 60 ⁄ 2,4“
Toe depth n L mm ⁄ in 50 ⁄ 2.0“ 55 ⁄ 2.2“ 55 ⁄ 2.2“
Length feet in front L 2 mm ⁄ in 326 ⁄ 12.8“ 346 ⁄ 13.6“ 346 ⁄ 13.6“
Length feet on side L 1 mm ⁄ in 311 ⁄ 12.2“ 330 ⁄ 13“ 330 ⁄ 13“
Width B mm ⁄ in 233 ⁄ 9.2“ 247 ⁄ 9.7“ 247 ⁄ 9.7“
Height H 2 mm ⁄ in 280 ⁄ 11“ 310 ⁄ 12.2“ 235 ⁄ 9.3“
Cylinder volume L ⁄ in3 0,18 ⁄ 11.5“ 0,3 ⁄ 19.6“ 0,21 ⁄ 12.82“
Weight kg ⁄ lbs 23 ⁄ 50.7 29 ⁄ 63.9 26 ⁄ 57.3
Order number
*load on top plate
Sketch
JH 10 G plus combined with our new Multi-Purposed trolleys.
Jack Series JH-G plus
Load capacity up to 10 metric tons
Inspection accordingly technical regulation
BGV D 8 (German) and ANSI/ASME (USA) Advantages in detail
Reduced friction through slide shoes that
are mobile in their seats. Under application
a larger contact surface guarantees
better force distribution. The resulting
advantages are less friction, more
power and reduced wear of the lifting
track than with conventional jacks (see
picture 1).
Reduced maintenance costs through easy
to change slide shoes and exchangeable
pump unit.
Extremely lightweight with high performance
through the use of high-quality
material and innovative design changes.
Continual adjustment to the load through
swivelling safety toe. Secure stableness in every situation
even in lifted position (see picture 2).
JH 15 / JH 20 G plus serial outfitted with fast stroke. Also
available with spring return.
Jack Series JH-G plus
Load capacity up to 20 metric tons
Type Sketch
18
JLB 3 K JLB 6 K
JFB 3 K JFB 6 K
JLB 3 K JFB 3 K JLB 6 K JFB 6 K
07 031 085-V 08 031 085-V 07 061 085-V 08 061 085-V
JL 9 K JFB 9 K JL 12 K JFB 12 K
07 090 085-V 08 091 085-V 07 120 085-V 08 121 085-V
JFB 12 K
JL 9 K JL 12 K
JFB 9 K
19
C
B1
Ø
L1
L2
B2 F
E
G-H
l
Transport trolleys Series K
For loads up to 24 metric tons
Example for load distribution on
JUWAthan®plus coated 12 tons trolley combination:
aluminium castor
JUWAmid coated
aluminium castor
for any floors
Order no. 95 050 057-V
for clean floors
Order no. 95 050 023-P
Type Sketch
Load capacity kg ⁄ lbs 3 000 ⁄ 6 600 2x 1 500 ⁄ 2x 3 300 6 000 ⁄ 13 200 2x 3 000 ⁄ 2x 6 600
Number of castors pcs 4 4 8 8
Castors dimensions Ø x I mm ⁄ in 85 x 85 ⁄ 3.3 x 3.3“ 85 x 85 ⁄ 3.3 x 3.3“ 85 x 85 ⁄ 3.3 x 3.3“ 85 x 85 ⁄ 3.3 x 3.3“
Fitting height mm ⁄ in 110⁄ 4.3“ 110 ⁄ 4.3“ 110 ⁄ 4.3“ 110 ⁄ 4.3“
Supporting surface per cassette E x F mm ⁄ in 120 x 80 ⁄ 4.7 x 3.1“ 175 x 170 ⁄ 6.9 x 6.7“
Cassette dimensions L 2 x B 2 mm ⁄ in 190 x 115 ⁄ 7.5 x 4.5“ 325 x 200 ⁄ 12.8 x 7.9“
Connecting rod with joint Length mm ⁄ in 1 000** ⁄ 39.4“ 1 230 ⁄ 48.4“
Cassettes adjustable from - to G - H mm ⁄ in 125 - 880 ⁄ 4.9 - 34.6“ 400 - 1 030 ⁄ 15.7 - 40.6“
Supporting surface of turnable Ø C mm ⁄ in 150 ⁄ 5.9“ 150 ⁄ 5.9“
Dimensions L 1 x B 1 mm ⁄ in 225 x 280 ⁄ 8.9 x 11“ 445x590 ⁄ 17.5x23.2“
Handlebar with pulling eye Length mm ⁄ in 990* ⁄ 39“ 1 120 ⁄ 44.1“
Weight JUWAthan plus kg ⁄ lbs 12 ⁄ 26 11 ⁄ 24 33 ⁄ 72 25 ⁄ 55
*JLB 3 K steering bar without pulling eye — **JFB 3 K without joint
Castors with ball bearings guarantee easy movement
Load weight up to 6 metric tons 12 metric tons
Available with:
Steel castor
for not sensitive floors
Order no. 95 050 043-S
Please refer to page 32-33 for additional roller information
Order number with JUWAthan plus
12 to
3 to
3 to
6 to
Inspection accordingly technical
regulation ANSI/ASME (USA)
Transport trolleys Series K
For loads up to 24 metric tons
Type Sketch
Load capacity kg ⁄ lbs 9 000 ⁄ 19 800 2x 4 500 ⁄ 2x 9 900 12 000 ⁄ 26 400 2x 6 000 ⁄ 2x 13 200
Number of castors pcs 12 12 16 16
Castors dimensions Ø x I mm ⁄ in 85 x 85 ⁄ 3.3 x 3.3“ 85 x 85 ⁄ 3.3 x 3.3“ 85 x 85 ⁄ 3.3 x 3.3“ 85 x 85 ⁄ 3.3 x 3.3“2
h1
V
H1/H2
L2
nL
Lb
B
L1
h2
h1
V
H1/H2
L2
nL
Lb
B
L1
h2
6° 6°
2
1
JH 6 G plus JH 10 G plus JH10 G plus ku
01 060 102-G 01 100 102-G 01 100 103-G ku
JH 6 G plus JH 10 G plus JH 10 G plus ku
6
nL
h1
h2 H1
H2
L1
L2
Lb
B
v
JH 15 G plus JH 20 G plus
7
JH 15 G plus JH 20 G plus
01 150 102-G 01 200 102-G
Type Sketch
Full load capacity* kg ⁄ lbs 6 000 ⁄ 13 200 10 000 ⁄ 22 000 10 000 ⁄ 22 000
Stroke mm ⁄ in 140 ⁄ 5.5“ 150 ⁄ 5.9“ 108 ⁄ 4.3“
Minimum lift toe height h 1 mm ⁄ in 12 ⁄ 0.5“ 15 ⁄ 0.6“ 15 ⁄ 0.6“
Maximum lift toe height h 2 mm ⁄ in 157 ⁄ 6.2“ 180 ⁄ 7.1“ 138 ⁄ 5.4“
Lift toe adjustment V mm ⁄ in 6 x 29 ⁄ 1.1“ 5 x 41 ⁄ 1.6“ 4 x 41 ⁄ 1.6“
Top plate height H 1 mm ⁄ in 245 ⁄ 9.6“ 275 ⁄ 10.8“ 235 ⁄ 9.3“
Toe width front L b mm ⁄ in 50 ⁄ 2.0“ 60 ⁄ 2,4“ 60 ⁄ 2,4“
Toe depth n L mm ⁄ in 50 ⁄ 2.0“ 55 ⁄ 2.2“ 55 ⁄ 2.2“
Length feet in front L 2 mm ⁄ in 326 ⁄ 12.8“ 346 ⁄ 13.6“ 346 ⁄ 13.6“
Length feet on side L 1 mm ⁄ in 311 ⁄ 12.2“ 330 ⁄ 13“ 330 ⁄ 13“
Width B mm ⁄ in 233 ⁄ 9.2“ 247 ⁄ 9.7“ 247 ⁄ 9.7“
Height H 2 mm ⁄ in 280 ⁄ 11“ 310 ⁄ 12.2“ 235 ⁄ 9.3“
Cylinder volume L ⁄ in3 0,18 ⁄ 11.5“ 0,3 ⁄ 19.6“ 0,21 ⁄ 12.82“
Weight kg ⁄ lbs 23 ⁄ 50.7 29 ⁄ 63.9 26 ⁄ 57.3
Order number
*load on top plate
Sketch
JH 10 G plus combined with our new Multi-Purposed trolleys.
Jack Series JH-G plus
Load capacity up to 10 metric tons
Inspection accordingly technical regulation
BGV D 8 (German) and ANSI/ASME (USA) Advantages in detail
Reduced friction through slide shoes that
are mobile in their seats. Under application
a larger contact surface guarantees
better force distribution. The resulting
advantages are less friction, more
power and reduced wear of the lifting
track than with conventional jacks (see
picture 1).
Reduced maintenance costs through easy
to change slide shoes and exchangeable
pump unit.
Extremely lightweight with high performance
through the use of high-quality
material and innovative design changes.
Continual adjustment to the load through
swivelling safety toe. Secure stableness in every situation
even in lifted position (see picture 2).
JH 15 / JH 20 G plus serial outfitted with fast stroke. Also
available with spring return.
Jack Series JH-G plus
Load capacity up to 20 metric tons
Type Sketch
Full load capacity* kg ⁄ lbs 15 000 ⁄ 33 000 20 000 ⁄ 44 000
Stroke mm ⁄ in 175 ⁄ 6.9“ 190 ⁄ 7.5“
Minimum lift toe height h 1 mm ⁄ in 20 ⁄ 0.8“ 20 ⁄ 0.8“
Maximum lift toe height h 2 mm ⁄ in 205 ⁄ 8.1“ 225 ⁄ 8.9“
Lift toe adjustment V mm ⁄ in 5 x 46 ⁄ 1.8“ 5 x 51 ⁄ 2“
Top plate height H 1 mm ⁄ in 310 ⁄ 12.2“ 340 ⁄ 13.4“
Toe width front L b mm ⁄ in 70 ⁄ 2.8“ 80 ⁄ 3.1“
Toe depth n L mm ⁄ in 66 ⁄ 2.6“ 66 ⁄ 2.6“
Length feet in front L 2 mm ⁄ in 415 ⁄ 16.3“ 425 ⁄ 16.7“
Length feet on side L 1 mm ⁄ in 401 ⁄ 15.8“ 405 ⁄ 15.9“
Width B mm ⁄ in 300 ⁄ 11.8“ 322 ⁄ 12.7“
Height H 2 mm ⁄ in 310 ⁄ 12.2“ 340 ⁄ 13.4“
Cylinder volume L ⁄ in3 0,5 ⁄ 30.2“ 0,73 ⁄ 44.6“
Weight kg ⁄ lbs 48 ⁄ 105.8 60 ⁄ 132.3
Order number
*load on top plate
Inspection accordingly technical regulation
BGV D 8 (German) and ANSI/ASME (USA)
Fitting height mm ⁄ in 110 ⁄ 4.3“ 110 ⁄ 4.3“ 110 ⁄ 4.3“ 110 ⁄ 4.3“
Supporting surface per cassette E x F mm ⁄ in 175 x 170 ⁄ 6.9 x 6.7 175 x 170 ⁄ 6.9 x 6.7
Cassette dimensions L 2 x B 2 mm ⁄ in 325 x 390 ⁄ 12.8 x 15.4 325 x 390 ⁄ 12.8 x 15.4
Connecting rod with joint Length mm ⁄ in 1 230 ⁄ 48.4“ 1 230 ⁄ 48.4“
Cassettes adjustable from - to G - H mm ⁄ in 400 - 1 030 ⁄ 15.7- 40.6“ 400 - 1 030 ⁄ 15.7- 40.6“
Supporting surface of turnable Ø C mm ⁄ in 170 ⁄ 6.7“ 170 ⁄ 6.7“
Dimensions L 1 x B 1 mm ⁄ in 580 x 820 ⁄ 22.8 x 32.3“ 580 x 1000 ⁄ 22.8 x 39,3“
Handlebar with pulling eye Length mm ⁄ in 1 120 ⁄ 44.1“ 1 120 ⁄ 44.1“
Weight JUWAthan plus kg ⁄ lbs 54 ⁄ 119 32 ⁄ 70 64 ⁄ 141 35 ⁄ 77
Load weight up to 18 metric tons 24 metric tons
Advantages in detail
Galvanized axles and safety clip rings for improved protection
against corrosion.
Outfitted with highest quality rollers as standard.
Reduced weight through advanced construction of load
cassettes.
All transport trolleys are ready for use: The steerable transport
trolley is fitted with a ball bearing supported turntable
and a handlebar (as shown in picture).
The adjustable-width transport trolley consists of two transport
units and connecting rod.
Non-marking support wheels.
The Series K handle bars are now also available with a
removable handle (see on page 31).
Sketch
Order number with JUWAthan plus
Inspection accordingly technical regulation ANSI/ASME (USA)
Removable handle
Full load capacity* kg ⁄ lbs 15000 ⁄ 33000 20000 ⁄ 44000
Stroke mm ⁄ in 175 ⁄ 6.9“ 190 ⁄ 7.5“
Minimum lift toe height h 1 mm ⁄ in 20 ⁄ 0.8“ 20 ⁄ 0.8“
Maximum lift toe height h 2 mm ⁄ in 205 ⁄ 8.1“ 225 ⁄ 8.9“
Lift toe adjustment V mm ⁄ in 5x46 ⁄ 1.8“ 5x51 ⁄ 2“
Top plate height H 1 mm ⁄ in 310 ⁄ 12.2“ 340 ⁄ 13.4“
Toe width front L b mm ⁄ in 70 ⁄ 2.8“ 80 ⁄ 3.1“
Toe depth n L mm ⁄ in 66 ⁄ 2.6“ 66 ⁄ 2.6“
Length feet in front L 2 mm ⁄ in 415 ⁄ 16.3“ 425 ⁄ 16.7“
Length feet on side L 1 mm ⁄ in 401 ⁄ 15.8“ 405 ⁄ 15.9“
Width B mm ⁄ in 300 ⁄ 11.8“ 322 ⁄ 12.7“
Height H 2 mm ⁄ in 310 ⁄ 12.2“ 340 ⁄ 13.4“
Cylinder volume L ⁄ in3 0,5 ⁄ 30.2“ 0,73 ⁄ 44.6“
Weight kg ⁄ lbs 48 ⁄ 105.8 60 ⁄ 132.3
Order number
*load on top plate
Inspection accordingly technical regulation
BGV D 8 (German) and ANSI/ASME (USA)      : MOUNTING BRACKET FOR FLAT SURFACE OR 2" PIPE
C             : STAINLESS STEEL REDUCER ¾ TO ½-IN FOR CONDUIT CONNECTION
MANUFACTURE : FISHER ROSEMOUNT
  PLENTY MIR VCFA80-4-SL
2 ea. ASCO solenoid valve SIZE : 0.25”-FNPT, 110 VAC - 50 HZ
BRASS 3/2 WAY 3 WAY MANUAL RESET, SOLENOID Valve UNIVERSAL OPERATION
EXPLOTION PROOF (NEMA 7 & 9), MIN PRESSURE : 0 PSI, MIN PRESSURE DIFF: 125 PSI,
MATERIAL BODY : BRASS,
PART NO. : EF8310B040
MANUFACTURE : ASCO
HF-Light Transmitter LIC770/01
Mfg: EMG
GS-01984228
KARCHER HDS 12/15S
WT98 主站PLC    ABB    O7KT98/WT98
WT97 从站PLC    ABB    07KT97/WT97
PMC    OAT    25.2-002
变桨变频器    伦茨    ECSCA064
交换机    MOXA    IMC-101-M-SC
以太网交换机    罗杰康    "RSG2100-R-RM-24-HI-FX06-FX06-
FX06-FX06-XXXX-XXXX-FX06-FX06-T"
工业交换机    罗杰康    i802
交换机    研华    EKI-7554SI
多功能转换器    SINEAX    SINEAX CAM
PT100    View:   
工业自动化和仪器仪表行业MS-GRAESSNERD 1901000部件：11LB45V2ART。
NR
22190A200044SN。
NR
3106806 BUCHERCINDY20-BPND-S300-A-G9-1 WWBSA-D / 12075050E + HPMD75-ABC7F21 DAAAVEMK21 R112 M2 TPM1404。
0KWVERSAVSG-4332-M-U-A120120 100VDCDUPLOMATICDS3-S4 / 11N-D24K1ODE106 / 5。
2 / S01 / WI-23011PG1 / 4VitonNCAC230V20VAKRACHTQ = 46,5L / MINKF32RF2-D15FIAMAI60-10-DX-2Z-0-10MURR56501JUMO709062 / 8-02-150-100-400-00 / 252TYA-202MOOGD661-4385CG60KOAA4VSX2HA5MTSRHM0500MD701S1B6102STENFLEXDN150A-1PN16SITEC719。
0008-LD-VI2 RITZ z Ksw 60 LIND YUCat。
5ExtenderREMOTENo。
42805 DC 5 V 2 A用于家庭和办公室用途ELEKTRA V 3 NKED 3 RI-KZ R15-B-SSGANTECPN 2007 AMPMS 3102 A-24-28 S（475 785）AIRPELM 24 D75。
0UMAXIMATORM033-01MTSRHS1300MP201S1B6100MOOGD661-6320CG45KOAA5VSX2HABAUERBG06-31 / D06LA4-TOF / SPSUNPOWERSPS230P-1212VDCTELEG2IU10A10PISTOR75 / 150No。
33610 HYDACS 3346-2-0016-Y00-F1 LEUZEMSI-M / R549904 ROLANDISQ 42 FS / 1 MABICOR + BINZEL839。
0023ROLANDI20-4-ET-S-FPGUTEKUNSTVD-200TRACO060 /124MTS370504MEGATRONMP201KΩ±15％SELETMB526PLA-K5vision-controlRK2036-IR850 / C / M51-29-604MKDHK-NW1825MOOGD661-4636G60KOAA5VSX2HAGEFRANME2-6-H-B05C-2-1-K-B68MURR56526PARKER321BCV00 /3 / 4G444497TRNr。
34-000-070BAUERBG10-37 / DWU08L12 / SPM25320105-4MICRO-EPSILONCTM-3SF22-C3MEELCISI / 45CC-1000-5-BZ-Y-VN-02WANDFLUHSIN45VU = 24VDCS1 = 100％EDVDE0580KENDRIONKLM22Z / 5585KUKA168334PHOENIX2901541PHOENIX2885919SCHUNK0320525MOOGD661-4469C / G75JOAA6VSX2HAMICHAELRIEDELURST1600。
16/0。
64 AMPMS 3102A-2S-14S（2982566）视觉控制LEUCHFIBP 635 M30。
5 * 0
5-FUJINON PLUS CS10。
24224-28 VDC / 10A188690462001150 PHOENIX 2701 186 ROLAND IEQ 42 FS / 1 MBUHLER MKS 1 / Wart。
NR 288 9999 230 V1 A 50 VAB + R8 BVI 0028 HWD0。
000-1 BUCHERCINDY 25-BPND-S400-A-G 9-1 STEIMELSF2 / 10 RD-O输出：约
11L / minPressure：5barReliefvalvesetting：2-20barMTSRHM0250MD701S1B6102BEFELDT2510N04T0FV095113C9MTS560888AMPMS3102A-18-1S（475741）S + RRG-25 /1BV3STEIDLEDüseGliederschlauch（L = 300）（= nozzlemultilinktube（6length = 300）订单号：112001ROLAND2277004NSDVLS-512PW200BVM-2AG-16PREMOTEC9904-120-18105MURR56641OTT95。
600
033。
AWR25 0.25 32.0 256
AWR30 0.30 31.0 288
AWR35 0.35 29.0 294
AWR50 0.50 27.0 365
AWR70 0.70 22.0 339
AWR100 1.00 18.0 324
AWR140 1.40 15.5 336
AWR150 1.50 15.0 338
AWR190 1.90 13.3 336
AWR200 2.00 13.0 338
AWR220 2.20 12.5 344
AWR250 2.50 12.0 360
AWR260 2.60 12.0 374
AWR320 3.20 10.8 373
AWR350 3.50 10.5 386
AWR390 3.90 10.0 390
AWR400 4.00 10.0 400
AWR450 4.50 9.2 381
AWR480 4.80 8.8 372
AWR500 5.00 8.5 361
AWR550 5.50 8.0 352
AWR580 5.80 7.7 344
AWR600 6.00 7.6 347
AWR650 6.50 7.4 356
AWR700 7.00 7.3 373
AWR800 8.00 7.1 403
AWR850 8.50 7.0 417
MYV 6038
ERE 6241
OYF 9685
BRQ 0364
MWV 9050
IWE 6266
MGR 9661
DIF 2760
ISH 4748
 Brand:CARRIER

MOUNTING SPRING MODEL 38AB 503 822 MANUFACTURER OR BRAND: CARRIER EQUIPMENT NAME: CONDENSING UNIT CONTROL PANEL


OVERLOAD BLOWER RELAY Model: CEP7-32-12-10-P-A Manufacturer or Brand: SPRECHER+SCHUH Equipment Name: AIR COND Equipment Model: SSC JOB4863



OVERLOAD RELAYModel: 4863-193 EECBManufacturer or Brand: SCIENTIFIC SYSTEMSEquipment Name: CONDENSING UNIT CONTROL PANEL



SEQUENCE TIMER Model: HK35AA009 Manufacturer or Brand: SCIENTIFIC SYSTEMS Equipment Name: CONDENSING UNIT CONTROL PANEL



SOLENOID VALVE COIL Model: R23MM120V Manufacturer or Brand: SCIENTIFIC SYSTEMS Equipment Name: CONDENSING UNIT CONTROL PANEL



CONTACTOR Model: P282-0632 Manufacturer or Brand: SCIENTIFIC SYSTEMS Equipment Name: CONDENSING UNIT CONTROL PANEL



CONTROL RELAY Model: HN61KK912 Manufacturer or Brand: SCIENTIFIC SYSTEMS Equipment Name: CONDENSING UNIT CONTROL PANEL


AWR 2590 AWR 2591 AWR 2592 AWR 2593 AWR 2594 AWR 2595 AWR 2596 AWR 2597 AWR 2598 AWR 2599 AWR 2600 AWR 2601 AWR 2602 AWR 2603 AWR 2604 AWR 2605 AWR 2606 AWR 2607 AWR 2608 AWR 2609 AWR 2610 AWR 2611 AWR 2612 AWR 2613 AWR 2614 AWR 2615 AWR 2616 AWR 2617 AWR 2618 AWR 2619 AWR 2620 AWR 2621 AWR 2622 AWR 2623 AWR 2624 AWR 2625 AWR 2626 AWR 2627 AWR 2628 AWR 2629 AWR 2630 AWR 2631 AWR 2632 AWR 2633 AWR 2634 AWR 2635 AWR 2636 AWR 2637 AWR 2638 AWR 2639 AWR 2640 AWR 2641 AWR 2642 AWR 2643 AWR 2644 AWR 2645 AWR 2646 AWR 2647 AWR 2648 AWR 2649 AWR 2650 AWR 2651 AWR 2652 AWR 2653 AWR 2654 AWR 2655 AWR 2656 AWR 2657 AWR 2658 AWR 2659 AWR 2660 AWR 2661 AWR 2662 AWR 2663 AWR 2664 AWR 2665 AWR 2666 AWR 2667 AWR 2668 AWR 2669 AWR 2670 AWR 2671 AWR 2672 AWR 2673 AWR 2674 AWR 2675 AWR 2676 AWR 2677 AWR 2678 AWR 2679 AWR 2680 AWR 2681 AWR 2682 AWR 2683 AWR 2684 AWR 2685 AWR 2686 AWR 2687 AWR 2688 AWR 2689 AWR 2690 AWR 2691 AWR 2692 AWR 2693 AWR 2694 AWR 2695 AWR 2696 AWR 2697 AWR 2698 AWR 2699 AWR 2700 AWR 2701 AWR 2702 AWR 2703 AWR 2704 AWR 2705 AWR 2706 AWR 2707 AWR 2708 AWR 2709 AWR 2710 AWR 2711 AWR 2712 AWR 2713 AWR 2714 AWR 2715 AWR 2716 AWR 2717 AWR 2718 AWR 2719 AWR 2720 AWR 2721 AWR 2722 AWR 2723 AWR 2724 AWR 2725 AWR 2726 AWR 2727 AWR 2728 AWR 2729 AWR 2730 AWR 2731 AWR 2732 AWR 2733 AWR 2734 AWR 2735 AWR 2736 AWR 2737 AWR 2738 AWR 2739 AWR 2740 AWR 2741 AWR 2742 AWR 2743 AWR 2744 AWR 2745 AWR 2746 AWR 2747 AWR 2748 AWR 2749 AWR 2750 AWR 2751 AWR 2752 AWR 2753 AWR 2754 AWR 2755 AWR 2756 AWR 2757 AWR 2758 AWR 2759 AWR 2760 AWR 2761 AWR 2762 AWR 2763 AWR 2764 AWR 2765 AWR 2766 AWR 2767 AWR 2768 AWR 2769 AWR 2770 AWR 2771 AWR 2772 AWR 2773 AWR 2774 AWR 2775 AWR 2776 AWR 2777 AWR 2778 AWR 2779 AWR 2780 AWR 2781 AWR 2782 AWR 2783 AWR 2784 AWR 2785 AWR 2786 AWR 2787 AWR 2788 AWR 2789 AWR 2790 AWR 2791 AWR 2792 AWR 2793 AWR 2794 AWR 2795 AWR 2796 AWR 2797 AWR 2798 AWR 2799 AWR 2800 AWR 2801 AWR 2802 AWR 2803 AWR 2804 AWR 2805 AWR 2806 AWR 2807 AWR 2808 AWR 2809 AWR 2810 AWR 2811 AWR 2812 AWR 2813 AWR 2814 AWR 2815 AWR 2816 AWR 2817 AWR 2818 AWR 2819 AWR 2820 AWR 2821 AWR 2822 AWR 2823 AWR 2824 AWR 2825 AWR 2826 AWR 2827 AWR 2828 AWR 2829 AWR 2830 AWR 2831 AWR 2832 AWR 2833 AWR 2834 AWR 2835 AWR 2836 AWR 2837 AWR 2838 AWR 2839 AWR 2840 AWR 2841 AWR 2842 AWR 2843 AWR 2844 AWR 2845 AWR 2846 AWR 2847 AWR 2848 AWR 2849 AWR 2850 AWR 2851 AWR 2852 AWR 2853 AWR 2854 AWR 2855 AWR 2856 AWR 2857 AWR 2858 AWR 2859 AWR 2860 AWR 2861 AWR 2862 AWR 2863 AWR 2864 AWR 2865 AWR 2866 AWR 2867 AWR 2868 AWR 2869 AWR 2870 AWR 2871 AWR 2872 AWR 2873 AWR 2874 AWR 2875 AWR 2876 AWR 2877 AWR 2878 AWR 2879 AWR 2880 AWR 2881 AWR 2882 AWR 2883 AWR 2884 AWR 2885 AWR 2886 AWR 2887 AWR 2888 AWR 2889
Páginas: 1, ..., 19631, 19632, 19633, 19634, 19635, 19636, 19637, 19638, 19639, 19640, 19641, 19642, 19643,
KET 2939
AWR860 8.60 6.8 398
AWR1000 10.00 6.2 384
AWR1100 11.00 6.0 396
AWR1150 11.50 5.9 400
AWR1170 11.70 5.9 407
AWR1200 12.00 5.8 404
AWR1500 15.00 5.3 421
AWR2000 20.00 4.6 423
AWR2700 27.00 3.6 350
AWR3600 36.00 3.0 324
AWR4500 45.00 2.5 281
AWR6200 62.00 2.0 248
AWR8000 80.00 1.8 259
AWR8100 81.00 1.8 262
AWR10000 100.00 1.6 256
AWR12500 125.00 1.4 245
AWR15000 150.00 1.3 254
AWR17500 175.00 1.2 252
AWR20000 200.00 1.1 242
AWR25000 250.00 1.0 250

6V05HYDAC0660R005BN4HCMICRO-EPSILONCTM-3SF22-C3ROEMHELD1893-1224MTSRPM2020MD701S1B6102MOOGD661-6347C（G23JOAA4NSX2HA）BUHLERG-NS-AM-K7。
5用于NS 10/25 AM-K 10-SK 166 / 8504-20 mA 10-30 VDC ROPEX RES-408/400 VACTRON 3 AWR 500-3 S-NTRONDYNAMIC BRMU RR 56720 SELETB 60122 POC 5海德汉EQ 1325。
035-2048 ID 823 901-03 MURR 56 30 TRON 3 AWR 2700-3 S-NTRONDYNAMICS IEMENS 6 EP 196 1-3 BA 20模块化电源1相和2相标准DINEN 50022-35安装导轨24 VDC ABICOR + BINZEL 839。
0024 ROLAND UDK 20-2 PW-ET-S-FPSELETMB 526 PFAAEG Artikelnr。
2000505202 Thyro-PX2PX500-37 HROEMHELD 18931191 WEISS5。
5AZK80L-4TB14P120代码：A601949MOOGD 661-6303CG35KOAA4N2 HAVISHAYPEC-Kondensator ESAT干燥CN1。
00μF是UN1700 VDCKMKPg 1700-1±10％。
01AARCOL309-1352150W220RBUHLERG-NS-AM-K7。
5forNS10 / 25 AM-K10-SK166 / 7004-20mA10-30VDCPlanetroilF-NR：AB22712ROLANDPW42AGSMURR56710HONERGFLEX-HRIMV-ITLO-SR / 12236066ALTHENP981-0107-10M0-350BG / SN109,0-350bar，supply10-36V，len10m，dia5ODE21A2KV55-ORWDN5。
5PG 1/4 AC 24 V 14。
5VA
Item 1: GE 750-P5-G5-S5-HI-A20-R-E
  GE 350-E-P5-G5-H-E-E-N-N-SN-D-H
GE 350-E-PX-GX-H-E-N-N-V-SN-N-H
 GE G60-A00-HCH-F8B-H6B-M8C-P5C-U6C-W6C
GE 750-P5-G5-S5-HI-A20-R-E
GE 750-P5-G5-S5-HI-A20-R-E
GE 339 E P5 G5 H E S N N SN D H
 GE 339 E P5 G5 H E S N N SN D H
GE 339-E-P5-G5-H-R-S-N-N-SN-D-H
GE 350-E-P5-G5-H-E-E-N-N-SN-D-H
GEYH-003
GE Multilin UR RHH
ARHC077011691 1
UR 9AH
A9AC04007019 1
INTERFACE UNIT SLAVE CONTROLLER BOX (WITHOUT SLAVE PCB)    As Is Good Condition
GEUN-001
EEW ENTIRE MODULE 200W-EEW    As Is Good Condition
2-39-54184
COATER SPIN MOTOR (NEED TO REFURBISH IF DEMAND)    As Is Good Condition
2-39-54184
DEVELOPER SPIN MOTOR    As Is Good Condition
A5027-9215
VEXTA STEPPING MOTOR (TR ARM HANDLING X-AXIS)    As Is Good Condition
PH544-NA
VEXTA STEPPING MOTOR (IFB HANDLING X-AXIS)    As Is Good Condition
A4331-9015TG
VEXTA STEPPING MOTOR (IDX VERTICAL)    As Is Good Condition
GEBM-111
HMDS MODULE 200W – LPAH   As Is Good Condition
GE Multilin UR RHH
ARHC077011691 1
UR 9AH
A9AC04007019 1
GEBM-121
COOLPLATE MODULE 200W-CP   As is Good Condition
GE Multilin UR RHH
ARHC077011691 1
UR 9AH
A9AC04007019 1
GEBM-131
COOLPLATE MODULE 200W-CP    As Is Good Condition
GE Multilin UR RHH
ARHC077011691 1
UR 9AH
A9AC04007019 1
GEBM-101
HOTPLATE MODULE 200W-HP    As Is Good Condition

GEPH-001 (X3)
MAIN POWER SUPPLY MODULE   As Is Good Condition

INR-244-418
COOLPLATE POWER SUPPLY    As Is Good Condition
GE Multilin UR RHH
ARHC077011691 1
UR 9AH
A9AC04007019 1
GEBH-001
HOTPLATE POWER SUPPLY    As Is Good Condition

GEDA-001
MODEL D2420-1    As Is Good Condition

GESP-001
MAINTENANCE PANEL    As Is Good Condition
Standard Motor Products CV231 Choke Thermostat
KOYO FC-161F-C
NOZZLE CAM POSITIONER FOR COATER UNIT    As Is Good Condition

OMRON E5CK-RR1
DIGITAL CONTROLLER (AIRFLOW METER)    As Is Good Condition
Standard Motor Products CV231 Choke Thermostat
VALCOM
HMDS DIGITAL CONTROLLER    As Is Good Condition

NAGANO KEIKI GC62
DIGITAL DIF.PRESSURE GAUGE    As Is Good Condition

RKC REX-AF10
AF10PD*BN-AN/A PRESSURE GUAGE    As Is Good Condition

KEYENCE AP-32A
PRESSURE GUAGE    As Is Good Condition

HPX-A1
OPTICAL SENSOR (FULL SET, USE FOR TR1 ROBOT WAFER SENSOR)    As Is Good Condition

IDI400 PUMP
IDI 400 RESIST PUMP    As Is Good Condition

SERV. 656.37493
Long Stroke Cable Slab  New
GESA-001
SERVO AMPLIFIER CONTROLLER    As Is Good Condition

GEMH-001
POWER SUPPLY UNIT    As Is Good Condition

D2480-1
INTERFACE UNIT IFB AXIS DRIVER    As Is Good Condition
A4922-9215KME
VEXTA STEPPING MOTOR (TR2 VERTICAL)    As Is Good Condition

A4552-9215KHGE
VEXTA STEPPING MOTOR (TR ARM ROTATION)    As Is Good Condition

HC-PQ13BD
MITSUBISHI AC SERVO MOTOR (IFB VERTICAL)    As Is Good Condition

SGMP-02A314
AC SERVO MOTOR (TR Y-AXIS)    As Is Good Condition

SGM-01A314C
AC SERVO MOTOR (TR VERTICAL)    As Is Good Condition    TM1202-3-140mm
PT100        TM1202-4-140mm
变送器    菲尼克斯    2814469
电源    菲尼克斯    2866213
电源    菲尼克斯    2866268
主碳刷    美尔森CG626    20*40*100
主碳刷    美尔森CG626    20*40*80
大接地    摩根MG114-A    12*24*64
    摩根MG114-A/B    8*20*50
主碳刷    摩根MG1147    20*40*100
超速传感器        CRRA
    REDUR     PL616
功率变送器    SINEAX    P530
污染发讯器    HYDAC    VL 3GW.0/-V-123+ZBE44
电流互感器    EFEN    PSA215 100/1A 10VA KL.1
电流互感器    EFEN    PSA1254 4000/5A 15VA KL.2
CROWBAR    windtec    WTCBA200A
熔丝    SIBA    63A
超级电容    MAXWELL    BMOD0058 E016B0216V 58F
变频器    超导    PM3000W
偏航变频器1.5MW    KEB    15F5C1E-Y50A
接触器    ABB    AL9-22-00
接触器    ABB    TNL22E
机侧网侧DSP板子    禾望    HWA1K
检测板    禾望    HWLIK
机型风速仪    THIES    4.3519.00.141
风向标    THIES    4.3129.60.142
KEB通讯面板    KEB   
控制面板    巴赫曼    OT115/R
整套PLC    巴赫曼    华锐1.5MW机舱
PLC模块    巴赫曼    MPC240
PLC模块    巴赫曼    MPC270
PLC模块    巴赫曼    MX213
PLC模块    巴赫曼    MC205
PLC模块    巴赫曼    DO216
PLC模块    巴赫曼    AIC212
PLC模块    巴赫曼    AIO288
PLC模块    巴赫曼    AIO288/1
PLC模块    巴赫曼    CM202
PLC模块    巴赫曼    CNT204/H
PLC模块    巴赫曼    CS200/N
PLC模块    巴赫曼    D0232
PLC模块    巴赫曼    DI232
PLC模块    巴赫曼    DI216
PLC模块    巴赫曼    DIO216
PLC模块    巴赫曼    DIO232
PLC模块    巴赫曼    DIO248
PLC模块    巴赫曼    DIO264
PLC模块    巴赫曼    DIO280
PLC模块    巴赫曼    DPM200
PLC模块    巴赫曼    EM203
PLC模块    巴赫曼    FM211
PLC模块    巴赫曼    FS211/N
PLC模块    巴赫曼    FS212/N
PLC模块    巴赫曼    ISI222
PLC模块    巴赫曼    NT255
PLC模块    巴赫曼    PTAI216
PLC模块    巴赫曼    RS204
PLC模块    巴赫曼    NT250
编码器    林德    862209126-2048
编码器    林德    862209116-2500