产品描述：
3/8 NPT F375C 15M66N3 1.00 (25.4) 1.63 (41.3)
3/8 NPT F562C 15M69N3 1.38 (35.1) 1.75 (44.5)
3/8 NPT F562C40 15M69N40 1.38 (35.1) 1.75 (44.5)
3/8 NPT 1/8 NPT
3/8 NPT 1/4 NPT 15M64N8 0.75 (19.1) 1.63 (41.3)
3/8 NPT 3/8 NPT
3/8 NPT 1/2 NPT 15M68N8 1.18 (30.1) 2.25 (57.2)
3/8 NPT 3/4 NPT
3/8 NPT 1 NPT
1/2 NPT W125 15M82N1 1.00 (25.4) 2.50 (63.5)
1/2 NPT SW250 15M84N2 1.00 (25.4) 1.63 (41.3)
1/2 NPT SW375 15M86N2 1.00 (25.4) 1.63 (41.3)
1/2 NPT SW500 10M88N2 1.00 (25.4) 1.88 (47.6)
1/2 NPT SF250CX 15M84N6 1.00 (25.4) 1.38 (35.1)
1/2 NPT SF375CX 15M86N6 1.00 (25.4) 1.63 (41.3)
1/2 NPT SF562CX 15M89N6 1.00 (25.4) 1.94 (49.2)
1/2 NPT SF750CX 15M812N6 1.38 (35.1) 2.18 (55.5)
1/2 NPT SF1000CX 15M816N6 1.75 (44.5) 2.81 (71.4)
1/2 NPT SF1500CX 15M824N6 2.25 (57.2) 3.62 (91.9)
1/2 NPT F1000C43
1/2 NPT F250C 15M84N3 1.00 (25.4) 1.50 (38.1)
1/2 NPT F312C150
1/2 NPT F375C 15M86N3 1.00 (25.4) 1.75 (44.5)
1/2 NPT F562C 15M89N3 1.38 (35.1) 1.88 (47.6)
1/2 NPT F562C40 15M89N40 1.38 (35.1) 1.75 (44.5)
1/2 NPT 1/8 NPT
1/2 NPT 1/4 NPT 15M84N8 1.00 (25.4) 1.75 (44.5)
1/2 NPT 3/8 NPT 15M86N8 1.00 (25.4) 1.81 (71.4)
1/2 NPT 1/2 NPT
1/2 NPT 3/4 NPT 10M812N8 1.38 (35.1) 2.25 (57.2)
1/2 NPT 1 NPT
B
A
Hex
10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
B
A
Hex
National Pipe Thread (NPT)
Maximum pressure rating is based on the lowest rating of any For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
3/4 NPT W125
3/4 NPT SW250 10M124N2 1.18 (30.1) 1.75 (44.5)
3/4 NPT SW375 10M126N2 1.18 (30.1) 1.75 (44.5)
3/4 NPT SW500 10M128N2 1.18 (30.1) 1.75 (44.5)
3/4 NPT SF250CX 10M124N6 1.18 (30.1) 1.75 (44.5)
3/4 NPT SF375CX 10M126N6 1.18 (30.1) 1.75 (44.5)
3/4 NPT SF562CX 10M129N6 1.38 (35.1) 2.00 (50.8)
3/4 NPT SF750CX 10M1212N6 1.38 (35.1) 2.25 (57.2)
3/4 NPT SF1000CX 10M1216N6 1.75 (44.5) 2.88 (73.0)
3/4 NPT F1000C43
3/4 NPT F250C 10M124N3 1.18 (30.1) 1.75 (44.5)
3/4 NPT F312C150
3/4 NPT F375C 10M126N3 1.18 (30.1) 2.00 (50.8)
3/4 NPT F562C 10M129N3 1.38 (35.1) 2.13 (54.0)
3/4 NPT F562C40
3/4 NPT 1/8 NPT 10M122N8 1.18 (30.1) 1.63 (41.3)
3/4 NPT 1/4 NPT 10M124N8 1.18 (30.1) 1.63 (41.3)
3/4 NPT 3/8 NPT
3/4 NPT 1/2 NPT
3/4 NPT 3/4 NPT
3/4 NPT 1 NPT
1 NPT W125
1 NPT SW250
1 NPT SW375 10M166N2 1.38 (35.1) 1.75 (44.5)
1 NPT SW500 10M168N2 1.38 (35.1) 1.75 (44.5)
1 NPT SF250CX
1 NPT SF375CX 10M166N6 1.38 (35.1) 2.00 (50.8)
1 NPT SF562CX 10M169N6 1.38 (35.1) 2.25 (57.2)
1 NPT SF750CX 10M1612N6 1.38 (35.1) 2.63 (66.7)
1 NPT SF1000CX 10M1616N6 1.75 (44.5) 3.06 (77.8)
1 NPT F1000C43 15M1616N3 1.75 (44.5) 3.06 (77.8)
1 NPT F250C
1 NPT F312C150
1 NPT F375C 10M166N3 1.38 (35.1) 2.00 (50.8)
1 NPT F562C 10M169N3 1.38 (35.1) 2.25 (57.2)
1 NPT F562C40
1 NPT 1/8 NPT
1 NPT 1/4 NPT
1 NPT 3/8 NPT
1 NPT 1/2 NPT 10M168N8 1.38 (35.1) 2.25 (57.2)
1 NPT 3/4 NPT
1 NPT 1 NPT
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Adapters/Couplings - Couplings
The couplings shown here permit the joining of any combination of standard size tubing or tubing and standard pipe with
female-to-female couplings. Other couplings available on
special order.
Pressure Rating - The pressure rating of Parker Autoclave
Engineers couplings is based on the lower rated connection
used.
How to use the Ordering Chart below:
1. Locate “A” connection in the vertical column.
2. Locate the desired “B” connection across the top of the chart.
3. The catalog number of the required coupling is located at the intersection of the two columns.
*Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
**1/2 low pressure rated to 10,000 psi.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
representative.CAUTION: See appropriate pressure section in reference to proper selection of tubing.
"A"
CONNECTION
FEMALE
"B"
CONNECTION
FEMALE
Note: Special material couplings may be supplied with four flats in place of
standard hex.
“A”
Connection
“B” Connection
SpeedBite Medium Pressure High Pressure
Tube
Outside
in (mm)
Connector
Type
Pressure
psi
(bar)*
1/8
W125
1/4
SW250
3/8
SW375
1/2**
SW500
1/4
SF
250CX
3/8
SF
375CX
9/16
SF
562CX
3/4
SF
750CX
1
SF
1000CX
1-1/2
SF
1500CX
1
SF
1000C43
1/4
F
250C
3/8
F
375C
9/16
F
562C
9/16
F
562C40
9/16
F
312C150
SpeedBite
1/8
(3.18) W125 15,000
(1034)
15F
2211
6F
2412
6F
2612
4F
2812
15F
2416
15F
2616
15F
2916
15F
21616
15F
2413
15F
2613
15F
2913
1/4
(6.35) SW250 15,000
(1034)
6F
4422
6F
4622
4F
4822
6F
4426
6F
4626
4F
4926
6F
4423
6F
4623
6F
4923
3/8
(9.52) SW375 15,000
(1034)
6F
6622
4F
6822
6F
6426
6F
6626
6F
6926
6F
61226
6F
61626
6F
6423
6F
6623
6F
6923
1/2
(12.70) SW500 10,000
(690)
4F
8822
4F
8426
4F
8626
4F
8926
4F
81226
4F
81626
4F
8423
4F
8623
4F
8923
Medium Pressure
1/4
(6.35) SF250CX 20,000
(1379)
20FX
4466
20F
4666
20F
4966
20F
41266
20F
41666
15FX
42466
20F
41663
20F
4463
20F
4663
20F
4963
20F
4563
3/8
(9.52) SF375CX 20,000
(1379)
20FX
6666
20F
6966
20F
61266
20F
61666
20F
61663
20F
6463
20F
6663
20F
6963
20F
6563
9/16
(14.27) SF562CX 20,000
(1379)
20FX
9966
20F
91266
20F
91666
15FX
92466
20F
9463
20F
9663
20F
9963
20F
9563
3/4
(19.05) SF750CX 20,000
(1379)
20FX
12
20F
121666
20F
12463
20F
12663
20F
12963
20F
12563
1
(25.40) SF1000CX 20,000
(1379)
20FX
16
20F
16463
20F
16663
20F
16963
20F
16563
1-1/2
(38.1) SF1500CX 15,000
(1034)
High Pressure
1
(25.40) F1000C43 43,000
(2965)
43F
16
1/4
(6.35) F250C 60,000
(4137)
43F
41633
60F
4433
60F
4633
60F
4933
60F
4533
3/8
(9.52) F375C 60,000
(4137)
43F
61633
60F
6633
60F
6933
60F
6533
9/16
(14.27) F562C 60,000
(4137)
60F
91633
60F
9933
60F
9533
9/16
(14.27) F562C40 60,000
(4137)
40F
9933
5/16
(7.92) F312C150 150,000
(10342)
150F
5533
National Pipe Thread (NPT)
1/8
(3.18) NPT 15,000
(1034)
15F
2281
15F
2482
15F
2682
15F
2882
15F
2486
15F
2686
15F
2986
15F
21286
15F
2483
15F
2683
15F
2983
15F
2583
1/4
(6.35) NPT 15,000
(1034)
15F
4281
15F
4482
15F
4682
15F
4882
15F
4486
15F
4686
15F
4986
15F
41286
15F
41686
15FX
42486
15F
4483
15F
4683
15F
4983
15F
4583
3/8
(9.52) NPT 15,000
(1034)
15F
6281
15F
6482
15F
6682
15F
6882
15F
6486
15F
6686
15F
6986
15F
61286
15F
61686
15F
6483
15F
6683
15F
6983
15F
6583
1/2
(12.70) NPT 15,000
(1034)
15F
8281
15F
8482
15F
8682
15F
8882
15F
8486
15F
8686
15F
8986
15F
81286
15F
81686
15F
8483
15F
8683
15F
8983
15F
8583
3/4
(19.05) NPT 10,000
(689)
10F
12882
10F
12686
10F
12986
10F
121286
10F
121686
15F
12983
1
(25.40) NPT 10,000
(689)
10F
16986
10F
161686
15F
16483
15F
16983
12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Coupling Dimensions - Speedbite
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
W125 W125 15F2211 0.50 (12.7) 1.25 (31.7)
W125 SW250 6F2412 0.63 (15.9) 1.44 (36.6)
W125 SW375 6F2612 0.75 (19.1) 1.50 (38.1)
W125 SW500 4F2812 1.00 (25.4) 1.63 (41.4)
W125 SF250CX 15F2416 0.63 (15.9) 1.38 (35.1)
W125 SF375CX 15F2616 0.75 (19.1) 1.50 (38.1)
W125 SF562CX 15F2916 1.00 (25.4) 1.75 (44.5)
W125 SF1000CX 15F21616 1.75 (44.5) 2.75 (69.9)
W125 F250C 15F2413 0.75 (19.1) 1.25 (31.7)
W125 F375C 15F2613 1.00 (25.4) 1.50 (38.1)
W125 F562C 15F2913 1.38 (35.1) 1.75 (44.5)
SW250 SW250 6F4422 0.63 (15.9) 1.63 (41.4)
SW250 SW375 6F4622 0.75 (19.1) 1.69 (42.9)
SW250 SW500 4F4822 1.00 (25.4) 1.88 (47.8)
SW250 SF250CX 6F4426 0.63 (15.9) 1.63 (41.4)
SW250 SF375CX 6F4626 0.75 (19.1) 1.75 (44.5)
SW250 SF562CX 6F4926 1.00 (25.4) 2.00 (50.8)
SW250 SF1000CX 6F41626 1.75 (44.5) 3.00 (76.2)
SW250 F250C 6F4423 0.75 (19.1) 1.50 (38.1)
SW250 F375C 6F4623 1.00 (25.4) 1.69 (42.9)
SW250 F562C 6F4923 1.38 (35.1) 2.06 (52.3)
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
SW375 SW375 6F6622 0.75 (19.1) 1.75 (44.5)
SW375 SW500 4F6822 1.00 (25.4) 1.88 (47.8)
SW375 SF250CX 6F6426 0.75 (19.1) 0.88 (22.2)
SW375 SF375CX 6F6626 0.75 (19.1) 1.75 (44.5)
SW375 SF562CX 6F6926 1.00 (25.4) 2.00 (50.8)
SW375 SF750CX 6F61226 1.38 (35.1) 2.25 (57.2)
SW375 SF1000CX 6F61626 1.75 (44.5) 3.00 (76.2)
SW375 F250C 6F6423 0.75 (19.1) 1.63 (41.4)
SW375 F375C 6F6623 1.00 (25.4) 1.81 (46.0)
SW375 F562C 6F6923 1.38 (35.1) 2.00 (50.8)
SW500 SW500 4F8822 1.00 (25.4) 2.00 (50.8)
SW500 SF250CX 4F8426 1.00 (25.4) 1.63 (41.4)
SW500 SF375CX 4F8626 1.00 (25.4) 1.88 (47.8)
SW500 SF562CX 4F8926 1.00 (25.4) 2.00 (50.8)
SW500 SF750CX 4F81226 1.38 (35.1) 2.25 (57.2)
SW500 SF1000CX 4F81626 1.75 (44.5) 3.00 (76.2)
SW500 F250C 4F8423 1.00 (25.4) 1.69 (42.9)
SW500 F375C 4F8623 1.00 (25.4) 1.88 (47.8)
SW500 F562C 4F8923 1.38 (35.1) 2.06 (52.3)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.
Coupling Dimensions - Medium Pressure
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex
B
SF750CX SF750CX 20FX12 1.38 (35.1) 2.50 (63.5)
SF750CX SF1000CX 20F121666 1.75 (44.5) 3.00 (76.2)
SF750CX F250C 20F12463 1.38 (35.1) 2.50 (63.5)
SF750CX F375C 20F12663 1.38 (35.1) 2.38 (60.33)
SF750CX F562C 20F12963 1.38 (35.1) 2.75 (69.9)
SF750CX F312C150 20F12563 1.38 (35.1) 2.75 (69.9)
SF1000CX SF1000CX 20FX16 1.75 (44.5) 3.50 (88.9)
SF1000CX F250C 20F16463 1.75 (44.5) 2.75 (69.9)
SF1000CX F375C 20F16663 1.75 (44.5) 2.88 (73.0)
SF1000CX F562C 20F16963 1.75 (44.5) 3.25 (82.6)
SF1000CX F312C150 20F16563 1.75 (44.5) 3.25 (82.6)
SF250CX SF250CX 20FX4466 0.63 (15.9) 1.63 (41.4)
SF250CX SF375CX 20F4666 0.75 (19.1) 1.75 (44.5)
SF250CX SF562CX 20F4966 1.00 (25.4) 2.00 (50.8)
SF250CX SF750CX 20F41266 1.38 (35.1) 2.25 (57.2)
SF250CX SF1000CX 20F41666 1.75 (44.5) 2.75 (69.9)
SF250CX SF1500CX 15FX42466 2.25 (57.1) 3.38 (85.6)
SF250CX F250C 20F4463 0.75 (19.1) 1.38 (35.1)
SF250CX F375C 20F4663 1.00 (25.4) 1.63 (41.4)
SF250CX F562C 20F4963 1.38 (35.1) 1.88 (47.8)
SF250CX F312C150 20F4563 1.00 (25.4) 2.13 (54.1)
SF250CX F1000C43 43F41663 1.75 (44.5) 2.75 (69.9)
SF375CX SF375CX 20FX6666 0.75 (19.1) 1.75 (44.5)
SF375CX SF562CX 20F6966 1.00 (25.4) 2.00 (50.8)
SF375CX SF750CX 20F61266 1.38 (35.1) 2.25 (57.2)
SF375CX SF1000CX 20F61666 1.75 (44.5) 2.88 (73.0)
SF375CX F250C 20F6463 0.75 (19.1) 1.63 (41.4)
SF375CX F375C 20F6663 1.00 (25.4) 2.00 (50.8)
SF375CX F562C 20F6963 1.38 (35.1) 2.00 (50.8)
SF375CX F312C150C 20F6563 1.00 (25.4) 2.25 (57.2)
SF375CX F1000C43 43F61663 1.75 (44.5) 2.88 (73.0
SF562CX SF562CX 20FX9966 1.00 (25.4) 2.13 (54.1)
SF562CX SF750CX 20F91266 1.38 (35.1) 2.50 (63.5)
SF562CX SF1000CX 20F91666 1.75 (44.5) 3.00 (76.2)
SF562CX SF1500CX 15FX92466 2.25 (57.1) 3.75 (85.6)
SF562CX F250C 20F9463 1.00 (25.4) 2.00 (50.8)
SF562CX F375C 20F9663 1.00 (25.4) 2.00 (50.8)
SF562CX F562C 20F9963 1.38 (35.1) 2.25 (57.2)
SF562CX F312C150C 20F9563 1.00 (25.4) 2.50 (63.5)
A
HEX
B
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Coupling Dimensions - National Pipe Thread (NPT)
Coupling Dimensions - High Pressure
Connection
“B”
Connection
“A”
Catalog
Number A Hex B
F250C F250C 60F4433 0.75 (19.1) 1.38 (35.1)
F250C F375C 60F4633 1.00 (25.4) 1.63 (41.4)
F250C F562C 60F4933 1.38 (35.1) 1.75 (44.5)
F250C F312C150 60F4533 1.00 (25.4) 2.00 (50.8)
F250C F1000C43 43F41633 1.75 (44.5) 2.75 (69.9)
F375C F375C 60F6633 1.00 (25.4) 1.75 (44.5)
F375C F562C 60F6933 1.38 (35.1) 2.00 (50.8)
F375C F312C150 60F6533 1.00 (25.4) 2.25 (57.2)
F375C F1000C43 43F61633 1.75 (44.5) 2.88 (73.0)
F562C F562C 60F9933 1.38 (35.1) 2.19 (55.6)
F562C40 F562C40 40F9933 1.38 (35.1) 2.19 (55.6)
F562C F312C150 60F9533 1.19 (30.1) 2.63 (66.7)
F562C SF1000C43 43F91633 1.75 (44.5) 3.75 (82.6)
F312C150 F312C150 150F5533 1.38 (35.1) 2.50 (63.5)
F1000C43 F1000C43 43F16 1.75 (44.5) 3.50 (88.9)
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
1/8 NPT W125 15F2281 0.63 (15.9) 1.38 (35.1)
1/8 NPT SW250 15F2482 0.63 (15.9) 1.50 (38.1)
1/8 NPT SW375 15F2682 0.75 (19.1) 1.63 (41.4)
1/8 NPT SW500 10F2882 1.00 (25.4) 1.50 (38.1)
1/8 NPT SF250CX 15F2486 0.63 (15.9) 1.38 (35.1)
1/8 NPT SF375CX 15F2686 0.75 (19.1) 1.50 (38.1)
1/8 NPT SF562CX 15F2986 1.00 (25.4) 1.63 (41.4)
1/8 NPT SF750CX 15F21286 1.38 (35.1) 1.75 (44.5)
1/8 NPT F250C 15F2483 0.75 (19.1) 1.38 (35.1)
1/8 NPT F375C 15F2683 1.00 (25.4) 1.63 (41.4)
1/8 NPT F562C 15F2983 1.38 (35.1) 1.82 (46.2)
1/8 NPT F312C150 15F2583 1.00 (25.4) 2.13 (54.1)
1/4 NPT W125 15F4281 0.75 (19.1) 1.50 (38.1)
1/4 NPT SW250 15F4482 0.75 (19.1) 1.63 (41.4)
1/4 NPT SW375 15F4682 0.75 (19.1) 1.75 (44.5)
1/4 NPT SW500 10F4882 1.00 (25.4) 2.00 (50.8)
1/4 NPT SF250CX 15F4486 0.75 (19.1) 1.63 (41.4)
1/4 NPT SF375CX 15F4686 0.75 (19.1) 1.75 (44.5)
1/4 NPT SF562CX 15F4986 1.00 (25.4) 2.00 (50.8)
1/4 NPT SF750CX 15F41286 1.38 (35.1) 1.75 (44.5)
1/4 NPT SF1000CX 15F41686 1.38 (35.1) 2.38 (60.33)
1/4 NPT SF1500CX 15F42486 2.25 (57.2) 3.25 (82.6)
1/4 NPT F250C 15F4483 0.75 (19.1) 1.63 (41.4)
1/4 NPT F375C 15F4683 1.00 (25.4) 1.88 (47.8)
1/4 NPT F562C 15F4983 1.38 (35.1) 2.00 (50.8)
1/4 NPT F312C150 15F4583 1.00 (25.4) 2.50 (63.5)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
representative.
A
HEX
B
A
HEX
B
Dimension inches (mm)
14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Coupling Dimensions - National Pipe Thread (NPT) - con’t
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
3/8 NPT W125 15F6281 1.00 (25.4) 1.63 (41.1)
3/8 NPT SW250 15F6482 1.00 (25.4) 1.75 (44.5)
3/8 NPT SW375 15F6682 1.00 (25.4) 1.88 (47.8)
3/8 NPT SW500 10F6882 1.00 (25.4) 2.00 (50.8)
3/8 NPT SF250CX 15F6486 0.94 (23.9) 1.63 (41.4)
3/8 NPT SF375CX 15F6686 0.94 (23.9) 1.82 (46.2)
3/8 NPT SF562CX 15F6986 1.00 (25.4) 2.00 (50.8)
3/8 NPT SF750CX 15F61286 1.38 (35.1) 2.38 (60.33)
3/8 NPT SF1000CX 15F61686 1.75 (44.5) 2.50 (63.5)
3/8 NPT F250C 15F6483 1.00 (25.4) 1.63 (41.4)
3/8 NPT F375C 15F6683 1.00 (25.4) 1.88 (47.8)
3/8 NPT F562C 15F6983 1.38 (35.1) 2.00 (50.8)
3/8 NPT F312C150 15F6583 1.00 (25.4) 2.25 (57.2
1/2 NPT W125 15F8281 1.88 (47.8) 2.00 (50.8)
1/2 NPT SW250 15F8482 1.88 (47.8) 2.13 (54.1)
1/2 NPT SW375 15F8682 1.88 (47.8) 2.13 (54.1)
1/2 NPT SW500 10F8882 1.19 (30.1) 2.25 (57.2)
1/2 NPT SF250CX 15F8486 1.19 (30.1) 2.00 (50.8)
1/2 NPT SF375CX 15F8686 1.19 (30.1) 2.13 (54.1)
1/2 NPT SF562CX 15F8986 1.19 (30.1) 2.25 (57.2)
1/2 NPT SF750CX 15F81286 1.38 (35.1) 2.63 (66.7)
1/2 NPT SF1000CX 15F81686 1.75 (44.5) 3.00 (76.2)
1/2 NPT F250C 15F8483 1.19 (30.1) 2.00 (50.8)
1/2 NPT F375C 15F8683 1.19 (30.1) 2.13 (54.1)
1/2 NPT F562C 15F8983 1.38 (35.1) 2.50 (63.5)
1/2 NPT F312C150 15F8583 1.19 (30.1) 2.50 (63.5)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.
A
HEX
B
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
3/4 NPT SW500 10F12882 1.38 (35.1) 2.50 (63.5)
3/4 NPT SF375CX 10F12686 1.38 (35.1) 2.25 (57.2)
3/4 NPT SF562CX 10F12986 1.38 (35.1) 2.25 (57.2)
3/4 NPT SF750CX 10F121286 1.50 (38.1) 2.63 (66.7)
3/4 NPT SF1000CX 10F121686 1.75 (44.5) 3.00 (76.2)
3/4 NPT F250C 10F12483 1.38 (35.1) 2.38 (60.33)
3/4 NPT F562C 10F12983 1.38 (35.1) 2.38 (60.33)
1 NPT SF562CX 10F16986 1.75 (44.5) 2.63 (66.7)
1 NPT SF1000CX 10F161686 1.75 (44.5) 2.88 (73.0)
1 NPT F250C 10F16483 1.88 (47.8) 2.38 (60.33)
1 NPT F562C 10F16983 1.75 (44.5) 2.50 (63.5)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
Adapters/Couplings - Male/Male Adapters
Parker Autoclave Engineer’s standard male-to-male one piece
adapters are available in low, medium, and high pressure
configurations. Standard male-to-male adapters are machined
from cold worked stainless steel. Other materials are available upon request. Contact your local Sales Representative
for optional information. The following tables list our standard
adapters with dimensions.
Adapter End Configuration
‘L’ Low Pressure ‘H’ High Pressure ‘RH’ Reverse High
Pressure
(Type "M" Male Adapter)
‘M’ Medium Pressure
Ordering Procedure
Typical catalog number: 20 MA M6 H9
20
Pressure
(X 1000 psi)
MA
Male
Adapter
M6
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H9
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
Available End Connections
L2 - 1/8” Low Pressure
L4 - 1/4” Low Pressure
L6 - 3/8” Low Pressure
L8 - 1/2” Low Pressure
‘P’ National Pipe Tapered
H4 - 1/4” High Pressure
H5 - 5/16” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
*RH9 - 9/16” -18 Reverse High
RH12 - 3/4” -16 Reverse High
RH14 - 7/8” -14 Reverse High
RH16 - 1” -12 Reverse High
RH21 - 1-5/16” -12 Reverse High
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).
RH or "Reverse High Pressure" Connection is also know as "Type "M" Male Connection"
16 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Low-Pressure to Low-Pressure Adapters
Medium-Pressure to Medium-Pressure Adapters
20MAM4H4 SF250CX F250C 0.63 (15.9) 1.75 (44.5)
20MAM4H6 SF250CX F375C 0.81 (20.6) 2.13 (54.0)
20MAM4H9 SF250CX F562C 1.19 (30.1) 2.63 (66.7)
20MAM6H4 SF375CX F250C 0.63 (15.9) 1.94 (49.2)
20MAM6H6 SF375CX F375C 0.81 (20.6) 2.38 (60.3)
20MAM6H9 SF375CX F562C 1.19 (30.1) 2.69 (68.2)
20MAM9H4 SF562CX F250C 0.81 (20.6) 2.25 (57.1)
20MAM9H6 SF562CX F375C 0.81 (20.6) 2.56 (65.0)
20MAM9H9 SF562CX F562C 1.19 (30.1) 2.94 (74.6)
20MAM12H4 SF750CX F250C 1.19 (30.1) 2.63 (66.7)
20MAM12H6 SF750CX F375C 1.19 (30.1) 2.88 (73.0)
20MAM12H9 SF750CX F562C 1.19 (30.1) 3.00 (76.2)
20MAM16H4 SF1000CX F250C 1.38 (34.9) 3.25 (82.6)
20MAM16H6 SF1000CX F375C 1.38 (34.9) 3.50 (89.0)
20MAM16H9 SF1000CX F562C 1.38 (34.9) 3.69 (93.6)
Medium-Pressure to High-Pressure Adapters
A
B
B
A
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
B
A
15MAL2L2 W125 W125 0.50 (12.7) 1.38 (34.9)
15MAL2L4 W125 SW250 0.63 (15.9) 1.63 (41.3)
15MAL4L4 SW250 SW250 0.63 (15.9) 1.88 (47.6)
10MAL6L8 SW375 SW500 1.00 (25.4) 2.25 (57.1)
10MAL8L8 SW500 SW500 1.00 (25.4) 2.13 (54.0)
20MAM4M4 SF250CX SF250CX 0.50 (12.7) 1.69 (42.9)
20MAM4M6 SF250CX SF375CX 0.63 (15.9) 1.88 (47.6)
20MAM4M9 SF250CX SF562CX 0.94 (23.8) 2.38 (60.3)
20MAM4M12 SF250CX SF750CX 1.19 (30.1) 2.69 (68.2)
20MAM4M16 SF250CX SF1000CX 1.38 (34.9) 3.38 (85.7)
20MAM6M6 SF375CX SF375CX 0.63 (15.9) 2.25 (57.1)
20MAM6M9 SF375CX SF562CX 0.94 (23.8) 2.38 (60.3)
20MAM6M12 SF375CX SF750CX 1.19 (30.1) 2.81 (71.4)
20MAM6M16 SF375CX SF1000CX 1.38 (34.9) 3.38 (85.7)
20MAM9M9 SF562CX SF562CX 0.94 (23.8) 2.50 (63.5)
20MAM9M12 SF562CX SF750CX 1.19 (30.1) 3.00 (76.2)
20MAM9M16 SF562CX SF1000CX 1.38 (34.9) 3.69 (93.72)
20MAM12M12 SF750CX SF750CX 1.19 (30.1) 3.13 (79.3)
20MAM12M16 SF750CX SF1000CX 1.38 (34.9) 3.81 (96.8)
20MAM16M16 SF1000CX SF1000CX 1.38 (34.9) 4.38 (111.1)
Connection
L/P
Catalog
Number
Connection
L/P
Dimension inches (mm)
A Hex B
Low-Pressure to Medium-Pressure Adapters
15MAL4M4 SW250 SF250CX 0.63 (15.9) 1.86 (47.3)
10MAL8M9 SW500 SF562CX 1.00 (25.4) 2.44 (62.0)
Connection
L/P
Catalog
Number
Dimension inches (mm)
A Hex B
Catalog
Number
Dimension inches (mm)
A Hex B
Catalog
Number
Dimension inches (mm)
A Hex B
Low-Pressure to High-Pressure Adapters
15MAL2H4 W125 F250C 0.63 (15.9) 1.63 (41.3)
15MAL2H6 W125 F375C 0.90 (25.4) 2.00 (50.8)
Connection
L/P
Catalog
Number
Dimension inches (mm)
A Hex B
B
A
Connection
M/P
Connection
H/P
Connection
M/P
Connection
M/P
Connection
M/P
Connection
H/P
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 17
A
B
Dimension inches (mm)
B
High-Pressure to High-Pressure Adapters
Connection
NPT
Dimension inches (mm)
A Hex B
Medium-Pressure to NPT Adapters
Connection
L/P
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
Low-Pressure to NPT Adapters
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
40MAH9H9 F562C40 F562C40 1.19 (30.1) 2.94 (74.6)
60MAH4H4 F250C F250C 0.63 (15.9) 1.69 (42.8)
60MAH4H5 F250C F312C150 0.75 (19.1) 2.63 (66.7)
60MAH4H6 F250C F375C 0.81 (20.6) 2.13 (54.0)
60MAH4H9 F250C F562C 1.19 (30.1) 2.56 (65.0)
60MAH5H6 F312C150 F375C 0.81 (20.6) 2.81 (71.4)
60MAH6H6 F375C F375C 0.81 (20.6) 2.25 (57.1)
60MAH6H9 F375C F562C 1.19 (30.1) 2.88 (73.0)
60MAH9H9 F562C F562C 1.19 (30.1) 3.00 (76.2)
150MAH5H5 F312C150 F312C150 0.75 (19.1) 3.38 (85.7)
Catalog
Number
Connection
H/P A Hex
Connection
M/P
Catalog
Number
15MAM4P4 SF250CX 1/4” 0.63 (15.9) 1.75 (44.5)
15MAM4P6 SF250CX 3/8” 0.75 (19.1) 1.81 (46.2)
15MAM4P8 SF250CX 1/2” 0.94 (23.8) 2.19 (55.5)
15MAM6P4 SF375CX 1/4” 0.63 (15.9) 1.94 (49.1)
15MAM6P6 SF375CX 3/8” 0.75 (19.1) 2.00 (50.8)
15MAM6P8 SF375CX 1/2” 0.94 (23.8) 2.38 (60.3)
15MAM9P4 SF562CX 1/4” 0.81 (20.6) 2.25 (57.1)
15MAM9P6 SF562CX 3/8” 0.81 (20.6) 2.13 (54.0)
15MAM9P8 SF562CX 1/2” 0.94 (23.8) 2.56 (65.0)
10MAM9P12 SF562CX 3/4” 1.19 (30.1) 2.75 (69.9)
10MAM9P16 SF562CX 1” 1.38 (34.9) 3.00 (76.2)
15MAM12P4 SF750CX 1/4” 1.19 (30.1) 2.63 (66.7)
15MAM12P6 SF750CX 3/8” 1.19 (30.1) 2.63 (66.7)
15MAM12P8 SF750CX 1/2” 1.19 (30.1) 2.81 (71.4)
10MAM12P12 SF750CX 3/4” 1.19 (30.1) 2.81 (71.4)
10MAM12P16 SF750CX 1” 1.19 (30.1) 2.81 (71.4)
15MAM16P4 SF1000CX 1/4” 1.38 (34.9) 3.38 (85.7)
15MAM16P6 SF1000CX 3/8” 1.38 (34.9) 3.31 (84.1)
15MAM16P8 SF1000CX 1/2” 1.38 (34.9) 3.44 (87.3)
10MAM16P12 SF1000CX 3/4” 1.50 (38.1) 3.75 (95.3)
10MAM16P16 SF1000CX 1” 1.50 (38.1) 4.00 (101.6)
15MAL2P2 W125 1/8” 0.50 (12.7) 1.38 (34.9)
15MAL2P4 W125 1/4” 0.63 (15.9) 1.63 (41.2)
15MAL2P8 W125 1/2” 1.00 (25.4) 2.13 (54.0)
15MAL4P8 SW250 1/2” 1.00 (25.4) 2.25 (57.1)
15MAL4P2 SW250 1/8” 0.63 (15.9) 1.63 (41.2)
15MAL4P4 SW250 1/4” 0.63 (15.9) 1.75 (44.5)
15MAL6P4 SW375 1/4” 0.75 (19.1) 1.88 (47.6)
15MAL6P8 SW375 1/2” 1.00 (25.4) 2.25 (57.1)
10MAL8P6 SW500 3/8” 1.00 (25.4) 2.00 (50.0)
10MAL8P8 SW500 1/2” 1.00 (25.4) 2.31 (58.7)
10MAL8P12 SW500 3/4” 1.19 (30.1) 2.38 (60.3)
Connection
H/P
18 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
A
B
Connection
H/P
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
High-Pressure to NPT Adapters
Connection
M/P
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
Medium-Pressure to Reverse High-Pressure (Type "M" Male) Adapters
Connection
NPT
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
NPT to NPT Adapters
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
15MAH4P4 F250C 1/4” 0.63 (15.9) 1.81 (46.2)
15MAH4P6 F250C 3/8” 0.75 (19.1) 1.88 (47.6)
15MAH4P8 F250C 1/2” 0.94 (23.8) 2.25 (57.1)
15MAH6P4 F375C 1/4” 0.81 (20.6) 2.13 (54.0)
15MAH6P6 F375C 3/8” 0.81 (20.6) 2.13 (54.0)
15MAH6P8 F375C 1/2” 0.94 (23.8) 2.50 (63.5)
15MAH9P4 F562C 1/4” 1.19 (30.1) 2.63 (66.7)
15MAH9P6 F562C 3/8” 1.19 (30.1) 2.56 (65.0)
15MAH9P8 F562C 1/2” 1.19 (30.1) 2.75 (69.9)
15MAP4P4 1/4 1/4” 0.63 (15.9) 1.81 (46.2)
15MAP4P6 1/4 3/8” 0.75 (19.1) 1.88 (47.6)
15MAP4P8 1/4 1/2” 0.94 (23.8) 2.31 (58.7)
15MAP6P6 3/8 3/8” 0.75 (19.1) 1.88 (47.6)
15MAP6P8 3/8 1/2” 0.94 (23.8) 2.31 (58.7)
15MAP8P8 1/2 1/2” 0.94 (23.8) 2.50 (63.5)
20MAM4RH9 SF250CX 9/16” 0.63 (15.9) 1.56 (39.7)
20MAM4RH12 SF250CX 3/4” 0.81 (20.6) 1.88 (47.6)
20MAM4RH16 SF250CX 1” 1.00 (25.4) 2.13 (54.0)
20MAM6RH9 SF375CX 9/16” 0.63 (15.9) 1.69 (42.8)
20MAM6RH12 SF375CX 3/4” 0.81 (20.6) 1.81 (46.2)
20MAM6RH16 SF375CX 1” 1.00 (25.4) 2.25 (57.1)
20MAM9RH9 SF562CX 9/16” 0.94 (23.8) 2.00 (50.8)
20MAM9RH12 SF562CX 3/4” 0.94 (23.8) 2.13 (54.0)
20MAM9RH14 SF562CX 7/8” 0.94 (23.8) 2.44 (61.9)
20MAM9RH16 SF562CX 1” 1.00 (25.4) 2.25 (57.1)
20MAM9RH21 SF562CX 1-5/16” 1.38 (34.9) 2.38 (60.3)
20MAM12RH9 SF750CX 9/16” 1.19 (30.1) 2.38 (60.3)
20MAM12RH12 SF750CX 3/4” 1.19 (30.1) 2.44 (61.9)
20MAM12RH16 SF750CX 1” 1.19 (30.1) 2.50 (63.5)
20MAM12RH21 SF750CX 1-5/16” 1.50 (38.1) 2.75 (69.9)
20MAM16RH9 SF1000CX 9/16” 1.38 (34.9) 3.13 (79.3)
20MAM16RH12 SF1000CX 3/4” 1.38 (34.9) 3.19 (80.9)
20MAM16RH14 SF1000CX 7/8” 1.38 (34.9) 3.34 (84.9)
20MAM16RH16 SF1000CX 1” 1.38 (34.9) 3.38 (85.7)
20MAM16RH21 SF1000CX 1-5/16” 1.50 (38.1) 3.25 (82.6)
15MAM24RH12 SF1500CX 3/4” 1.88 (47.8) 3.88 (98.6)
15MAM24RH16 SF1500CX 1” 1.88 (47.8) 3.88 (98.6)
15MAM24RH21 SF1500CX 1-5/16” 1.88 (47.8) 3.88 (98.6)
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 19
Connection
H/P
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
26MAH4RH16 F250C 1” 1.00 (25.4) 2.13 (54.0)
26MAH6RH16 F375C 1” 1.00 (25.4) 2.25 (57.1)
26MAH9RH16 F562C 1” 1.19 (30.1) 2.69 (68.2)
30MAH4RH12 F250C 3/4” 0.81 (20.6) 1.88 (47.6)
30MAH6RH12 F375C 3/4” 0.81 (20.6) 2.06 (54.0)
30MAH9RH12 F562C 3/4” 1.19 (30.1) 2.50 (63.5)
40MAH4RH9 F250C 9/16” 0.63 (15.9) 1.56 (39.7)
40MAH6RH9 F375C 9/16” 0.81 (20.6) 1.94 (49.1)
40MAH9RH9 F562C 9/16” 1.19 (30.1) 2.38 (60.3)
High-Pressure to Reverse High-Pressure (Type "M" Male) Adapters
Connection
NPT
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
NPT to Reverse High-Pressure (Type "M" Male) Adapters
Connection
RH
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
Reverse High-Pressure to Reverse High-Pressure (Type "M" Male to Type "M" Male) Adapters
B
A
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
15MAP4RH9 1/4 9/16” 0.63 (15.9) 1.63 (41.2)
15MAP4RH12 1/4 3/4” 0.81 (20.6) 1.88 (47.6)
15MAP4RH16 1/4 1” 1.00 (25.4) 2.25 (57.1)
15MAP6RH9 3/8 9/16” 0.75 (19.1) 1.81 (46.2)
15MAP6RH12 3/8 3/4” 0.81 (20.6) 1.94 (49.1)
15MAP6RH16 3/8 1” 1.00 (25.4) 2.13 (54.0)
15MAP8RH9 1/2 9/16” 0.94 (23.8) 2.00 (50.8)
15MAP8RH12 1/2 3/4” 0.94 (23.8) 2.13 (54.0)
15MAP8RH14 1/2 7/8” 1.00 (25.4) 2.25 (57.1)
15MAP8RH16 1/2 1” 1.00 (25.4) 2.31 (58.7)
10MAP12RH12 3/4 3/4” 1.19 (30.1) 2.31 (58.7)
10MAP12RH16 3/4 1” 1.38 (34.9) 2.63 (66.7)
10MAP12RH21 3/4 1-5/16” 1.38 (34.9) 2.63 (66.7)
10MAP16RH9 1 9/16” 1.38 (34.9) 2.25 (57.2)
10MAP16RH16 1 1” 1.38 (34.9) 2.81 (71.4)
10MAP16RH21 1 1-5/16” 1.38 (34.9) 2.68 (68.0)
20MARH21RH21 1-5/16 1-5/16” 1.38 (34.9) 2.13 (54.1)
26MARH9RH16 9/16 1” 1.00 (25.4) 1.88 (47.6)
26MARH12RH16 3/4 1” 1.00 (25.4) 2.00 (50.8)
26MARH16RH16 1 1” 1.00 (25.4) 2.00 (50.8)
30MARH9RH12 9/16 3/4” 0.81 (20.6) 1.63 (41.2)
30MARH12RH12 3/4 3/4” 0.81 (20.6) 1.75 (44.5)
40MARH9RH9 9/16 9/16” 0.63 (15.9) 1.50 (38.1)
20 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
QSS Male/Female Adapters
Male /female adapters are designed to adapt a female connection to another size and/or type of connection without the need
for additional couplings. In selecting an adapter involving two
different sized connections, the larger connection should be
on the male end where it is possible to maximize the mechanical strength of the adapter.
To use this chart:
1. Locate MALE end in vertical column.
2. Locate desired FEMALE end of adapter across top of chart.
3. Catalog number of required adapter is located at
intersection of columns.
4. For one piece adapter add-OP to suffix of part number.
Connection
Size and Type
Quick Set
Quick Set Medium Pressure
Note:
All Parker Autoclave Engineers adapters are supplied complete with appropriate gland nuts and sleeves
unless specified without.
Materials
All Parker Autoclave Engineers adapters are precision machined from cold-worked Type 316 stainless steel.
Medium Pressure
High Pressure National Pipe Thread (NPT)
* The maximum pressure rating for an adapter is determined by the connection component with the
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
LOWER.
CAUTION: See appropriate pressure section in reference to proper selection of tubing.
FEMALE END
MALE END
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE
tape, consider using thread lubrication to prevent galling of mating parts.
1/4” 3/8” 9/16” 3/4” 1/4” 3/8” 9/16” 3/4” 1” QS250 QS375 QS562 QS750 SF250CX SF375CX SF562CX SF750CX SF1000CX
Fits this Pressure 15,000 15,000 15,000 15,000 20,000 20,000 20,000 20,000 20,000
Female Rating (1034.20) (1034.20) (1034.20) (1034.20) (1378.93) (1378.93) (1378.93) (1378.93) (1378.93)
Connection PSI (bar)*
1/4” QS250 15M46QQ 15M49QQ 15M412QQ 15M44Q6 15M46Q6 15M49Q6 15M412Q6 15M416Q6
3/8” QS375 15M64QQ 15M69QQ 15M612QQ 15M64Q6 15M66Q6 15M69Q6 15M612Q6 15M616Q6
9/16” QS562 15M94QQ 15M94QQ 15M912QQ 15M94Q6 15M96Q6 15M99Q6 15M912Q6 15M916Q6
3/4” QS750 15M124QQ 15M126QQ 15M129QQ 15M124Q6 15M126Q6 15M129Q6 15M1212Q6 15M1216Q6
1/4” SF250CX 15M44KQ 15M46KQ 15M49KQ 15M412KQ
3/8” SF375CX 15M64KQ 15M66KQ 15M69KQ 15M612KQ
9/16” SF562CX 15M94KQ 15M96KQ 15M99KQ 15M912KQ
3/4” SF750CX 15M124KQ 15M126KQ 15M129KQ 15M1212KQ
1” SF1000CX 15M164KQ 15M166KQ 15M169KQ 15M1612KQ
1/4” F250C 15M44BQ 15M46BQ 15M49BQ 15M412BQ
3/8” F375C 15M64BQ 15M66BQ 15M69BQ 15M612BQ
9/16” F562C 15M94BQ 15M96BQ 15M99BQ 15M912BQ
1/4” NPT 15M44NQ 15M46NQ 15M49NQ 15M412NQ
3/8” NPT 15M64NQ 15M66NQ 15M69NQ 15M612NQ
1/2” NPT 15M84NQ 15M86NQ 15M89NQ 15M812NQ
3/4” NPT 10M124NQ 10M126NQ 10M129NQ 10M1212NQ
1” NPT 10M164NQ 10M166NQ 10M169NQ 10M1612NQ
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
60,000
(4136.85)
60,000
(4136.85)
60,000
(4136.85)
15,000
(1034.20)
15,000
(1034.20)
15,000
(689.45)
10,000
(689.45)
10,000
(689.45)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 21
High Pressure
1/4” 3/8” 9/16” 1/4” 3/8” 1/2” 3/4” 1” F250C F375C F562C NPT NPT NPT NPT NPT
60,000 60,000 150,000 15,000 15,000 15,000 10,000 10,000
(4136.85) (4136.85) (10342.14) (1034.20) (1034.20) (1034.20) (689.45) (689.45)
15M44Q3 15M46Q3 15M49Q3 15M44Q8 15M46Q8 15M48Q8 10M412Q8 10M416Q8
15M64Q3 15M66Q3 15M69Q3 15M64Q8 15M66Q8 15M68Q8 10M612Q8 10M616Q8
15M94Q3 15M96Q3 15M99Q3 15M94Q8 15M96Q8 15M98Q8 10M912Q8 10M916Q8
15M124Q3 15M126Q3 15M129Q3 15M124Q8 15M126Q8 15M128Q8 10M1212Q8 10M1216Q8
National Pipe Thread (NPT)
AE Male/Female Adapters are available in a “one-piece” design. They are identical to the two piece designs in
length and can be ordered by adding the suffix - OP to the two piece adapter part numbers listed.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.factory.
FEMALE END
Quick Set Female
to
Quick Set Male
Quick Set Female
to
Medium Pressure Male
Quick Set Female
to
High Pressure Male
Quick Set Female
to
National Pipe Male
22 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Catalog
Number
Dimension inches (mm)
A Hex B
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory. Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Male End
Fits this
Connection
A
HEX
B
A
HEX
B
QSS to Pipe QSS to QSS
QS250 QS250
QS250 QS375 15M46QQ
QS250 QS562 15M49QQ 1.38 (34.9) 2.25 (57.1)
QS250 QS750 15M412QQ
QS250 SF250CX 15M44Q6
QS250 SF375CX 15M46Q6
QS250 SF562CX 15M49Q6
QS250 SF750CX 15M412Q6
QS250 SF1000CX 15M416Q6
QS250 F250C 15M44Q3
QS250 F375C 15M46Q3
QS250 F562C 10M49Q3
QS250 1/4 NPT 15M44Q8 0.75 (19.1) 1.69 (42.9)
QS250 3/8 NPT 15M46Q8
QS250 1/2 NPT 15M48Q8
QS250 3/4 NPT 10M412Q8
QS250 1 NPT 10M416Q8
QS375 QS250 15M64QQ 0.75 (19.1) 1.53 (38.9)
QS375 QS375
QS375 QS562 15M69QQ
QS375 QS750 15M612QQ 1.50 (38.1) 2.78 (70.6)
QS375 SF250CX 15M64Q6
QS375 SF375CX 15M66Q6 0.75 (19.1) 1.66 (42.2)
QS375 SF562CX 15M69Q6 1.00 (25.4) 1.78 (45.2)
QS375 SF750CX 15M612Q6
QS375 SF1000CX 15M616Q6
QS375 F250C 15M64Q3
QS375 F375C 15M66Q3
QS375 F562C 15M69Q3
QS375 1/4 NPT 15M64Q8 0.75 (19.1) 1.66 (42.2)
QS375 3/8 NPT 15M66Q8 1.00 (25.4) 1.78 (45.3)
QS375 1/2 NPT 15M68Q8 1.19 (30.1) 2.16 (54.8)
QS375 3/4 NPT 10M612Q8
QS375 1 NPT 10M616Q8
QS562 QS250 15M94QQ 1.00 (25.4) 1.85 (46.8)
QS562 QS375 15M96QQ 1.00 (25.4) 1.85 (46.8)
QS562 QS562
QS562 QS750 15M912QQ 1.50 (38.1) 3.16 (80.3)
QS562 SF250CX 15M94Q6
QS562 SF375CX 15M96Q6
QS562 SF562CX 15M99Q6
QS562 SF750CX 15M912Q6
QS562 SF1000CX 15M916Q6
QS562 F250C 15M94Q3
QS562 F375C 15M96Q3
QS562 F562C 15M99Q3
QS562 1/4 NPT 15M94Q8 1.19 (30.1) 2.22 (56.4)
QS562 3/8 NPT 15M96Q8 1.19 (30.1) 2.22 (56.4)
QS562 1/2 NPT 15M98Q8 1.19 (30.1) 2.41 (61.1)
QS562 3/4 NPT 10M912Q8 1.38 (35.1) 2.56 (65.0)
QS562 1 NPT 10M916Q8
QS750 QS250 15M124QQ
QS750 QS375 15M126QQ 1.50 (38.1) 2.53 (64.1)
QS750 QS562 15M129QQ 1.50 (38.1) 2.53 (64.1)
QS750 QS750
QS750 SF250CX 15M124Q6
QS750 SF375CX 15M126Q6
QS750 SF562CX 15M129Q6
QS750 SF750CX 15M1212Q6
QS750 SF1000CX 15M1216Q6
QS750 F250C 15M124Q3
QS750 F375C 15M126Q3
QS750 F562C 15M129Q3
QS750 1/4 NPT 15M124Q8 0.75 (19.1) 1.66 (42.2)
QS750 3/8 NPT 15M126Q8 1.00 (25.4) 1.78 (45.3)
QS750 1/2 NPT 15M128Q8 1.50 (38.1) 2.78 (70.5)
QS750 3/4 NPT 10M1212Q8
QS750 1 NPT 10M1216Q8
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 23
SF562CX QS250 15M94KQ 0.94 (23.8) 1.75 (44.5)
SF562CX QS375 15M96KQ 0.94 (23.8) 1.75 (44.5)
SF562CX QS562 15M99KQ 1.38 (34.9) 2.50 (63.5)
SF562CX QS750 15M912KQ 1.50 (38.1) 3.25 (82.6)
SF750CX QS250 15M124KQ
SF750CX QS375 15M126KQ
SF750CX QS562 15M129KQ 1.38 (34.9) 2.50 (63.5)
SF750CX QS750 15M1212KQ 1.50 (38.1) 3.06 (77.7)
SF1000CX QS250 15M164KQ
SF1000CX QS375 15M166KQ
SF1000CX QS562 15M169KQ 1.50 (38.1) 2.88 (73.0)
SF1000CX QS750 15M1612KQ 1.50 (38.1) 3.38 (85.7)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
FFor prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
F375C QS250 15M64BQ
F375C QS375 15M66BQ 0.81 (20.6) 1.69 (42.9)
F375C QS562 15M69BQ
F375C QS750 15M612BQ
F562C QS250 15M94BQ 1.19 (30.1) 1.81(46.1)
F562C QS375 15M96BQ 1.19 (30.1) 1.69 (42.9)
F562C QS562 15M99BQ 1.38 (34.9) 2.32 (58.8)
F562C QS750 15M912BQ 1.50 (38.1) 3.06 (77.7)
SF250CX QS250 15M44KQ 0.75 (19.1) 1.68 (42.7)
SF250CX QS375 15M46KQ 0.81 (20.6) 1.68 (42.7)
SF250CX QS562 15M49KQ 1.19 (30.1) 2.22 (56.4)
SF250CX QS750 15M412KQ
SF375CX QS250 15M64KQ 0.75 (19.1) 1.63 (41.4)
SF375CX QS375 15M66KQ 0.81 (20.6) 1.81 (46.1)
SF375CX QS562 15M69KQ
SF375CX QS750 15M612KQ 1.50 (38.1) 3.00 (76.20)
F250C QS250 15M44BQ 0.75 (19.1) 1.31 (33.3)
F250C QS375 15M46BQ 0.81 (20.6) 1.56 (39.7)
F250C QS562 15M49BQ
F250C QS750 15M412BQ
B
A
HEX
MP to QSS HP to QSS
B
A
HEX
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Catalog
Number
Dimension inches (mm)
A Hex B
Male End
Fits this
Connection
24 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
3/4 NPT QS250 10M124NQ
3/4 NPT QS375 10M126NQ
3/4 NPT QS562 10M129NQ 1.38 (35.1) 2.38 (60.3)
3/4 NPT QS750 10M1212NQ 1.50 (38.1) 2.81 (71.4)
1 NPT QS250 10M164NQ
1 NPT QS275 10M166NQ
1 NPT QS562 10M169NQ 1.50 (38.1) 2.38 (60.3)
1 NPT QS750 10M1612NQ 1.50 (38.1) 2.38 (60.3)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
B
A
HEX
NPT to QSS
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
1/4 NPT QS250 15M44NQ 0.75 (19.1) 1.44 (36.5)
1/4 NPT QS375 15M46NQ 0.81 (20.6) 1.63 (41.3)
1/4 NPT QS562 15M49NQ
1/4 NPT QS750 15M412NQ
3/8 NPT QS250 15M64NQ 0.75 (19.1) 1.50 (38.1)
3/8 NPT QS375 15M66NQ 0.81 (20.6) 1.63 (41.3)
3/8 NPT QS562 15M69NQ 1.38 (35.1) 2.13 (53.5)
3/8 NPT QS750 15M612NQ
1/2 NPT QS250 15M84NQ 0.94 (23.8) 1.75 (44.5)
1/2 NPT QS375 15M86NQ 0.94 (23.8) 1.63 (41.3)
1/2 NPT QS562 15M89NQ 1.38 (35.1) 2.25 (57.2)
1/2 NPT QS750 15M812NQ 1.50 (38.1) 2.81 (71.4)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 25
QSS Male/Male Adapters
Parker Autoclave Engineer’s standard male-to-male one piece adapters are
available in multiple configurations. Standard male-to-male adapters are
machined from cold worked stainless steel.Contact your local Sales
Representative for optional information. The following tables list our
standard adapters with dimensions.
Adapter End Configuration
QS Series ‘H’ High Pressure ‘RH’ Reverse High
Pressure
(Type "M" Male Adapter)
‘M’ Medium Pressure
Ordering Procedure
Typical catalog number: 15 MA Q4 H9
15
Pressure
(X 1000 psi)
MA
Male
Adapter
Q4
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H9
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
Available End Connections
Q4 - 1/4” QS Series
Q6 - 3/8” QS Series
Q9 - 9/16” QS Series
Q12 - 3/4” QS Series
‘P’ National Pipe Tapered
H4 - 1/4” High Pressure
H5 - 5/16” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
*RH9 - 9/16” -18 Reverse High
RH12 - 3/4” -16 Reverse High
RH14 - 7/8” -14 Reverse High
RH16 - 1” -12 Reverse High
RH21 - 1-5/16” -12 Reverse High
*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).
RH or "Reverse High Pressure" Connection is also know as "Type "M" Male Connection"
26 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
QS Series to Reverse High-Pressure (Type "M" Male) Adapters
Connection
QS
15MAQ4RH9 QS250 9/16” 0.63 (15.9) 1.70 (43.2)
15MAQ6RH9 QS375 9/16” 0.75 (19.1) 1.81 (46.2)
15MAQ9RH9 QS562 9/16” 1.19 (30.1) 2.25 (57.1)
15MAQ9RH12 QS562 3/4” 1.19 (30.1) 2.38 (60.3)
15MAQ9RH16 QS562 1” 1.19 (30.1) 2.56 (65.1)
15MAQ12RH9 QS750 9/16” 1.38 (35.1) 3.00 (76.2)
15MAQ16RH9 QS1000 9/16” 1.75 (44.45) 3.25 (82.55)
A
B
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ9H4 QS562 1/4” 0.75 (19.1) 2.00 (50.8)
A
B
QS Series to High-Pressure Adapter
Connection
H/P
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ6P4 QS375 1/4” 1.19 (30.1) 2.44 (62.0)
15MAQ6P8 QS375 1/2” .94 (23.9) 2.19 (55.6)
15MAQ9P4 QS562 1/4” 1.00 (25.4) 2.44 (62.0)
QS Series to NPT Adapter
Connection
NPT
A
B
A
B
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ6J4 QS375 1/4” 0.75 (19.1) 1.75 (44.5)
QS Series to JIC Adapter
Connection
NPT
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 27
Adapters/Couplings - Male/Male JIC Adapters
Parker Autoclave Engineer’s male-to-male JIC one-piece adapters
are available in low, medium, and high pressure configurations.
JIC adapters are machined from cold worked stainless steel. Other
materials are available upon request. Contact your local Sales
Representative for optional information. The following tables list our
standard adapters with dimensions.
Adapter End Configuration
JIC connections consist of a 37° angle.
Ordering Procedure
Typical catalog number: 20 MA M4 J4
20
Pressure
(X 1000 psi)
MA M4 J4
Available End Connections
L4 - 1/4” Low Pressure
L6 - 3/8” Low Pressure
L8 - 1/2” Low Pressure
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H4 - 1/4” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
Male
Adapter
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
*J4 - 1/4” JIC
J6 - 3/8” JIC
J8 - 1/2” JIC
J10 - 5/8” JIC
J12 - 3/4” JIC
J16 - 1” JIC
*J4, J6, J8 & J10 - 20,000 psi (1380 bar), J12 & J16 - 15,000 psi (1034 bar)
Thread Sizes
J4 - 7/16-20
J6 - 9/16-18
J8 - 3/4-16
J10 - 7/8-14
J12 - 1-1/16-12
J16 - 1-5/16-12
28 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Connection
L/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
Low-Pressure to JIC Adapters
Connection
M/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
Medium-Pressure to JIC Adapters
Connection
H/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
High-Pressure to JIC Adapters
A
B
B
A
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
20MAH4J2 F250C 1/8” 0.63 (15.9) 1.50 (38.1)
20MAH4J4 F250C 1/4” 0.75 (19.1) 1.63 (41.3)
20MAH4J6 F250C 3/8” 0.81 (20.6) 1.63 (41.3)
20MAH4J8 F250C 1/2” 1.00 (25.4) 1.88 (47.6)
20MAH6J4 F375C 1/4” 0.81 (20.6) 1.94 (49.1)
20MAH6J6 F375C 3/8” 0.81 (20.6) 1.94 (49.1)
20MAH6J8 F375C 1/2” 1.00 (25.4) 2.19 (55.5)
20MAH9J4 F562C 1/4” 1.19 (30.1) 2.31 (58.7)
20MAH9J6 F562C 3/8” 1.19 (30.1) 2.31 (58.7)
20MAH9J8 F562C 1/2” 1.19 (30.1) 2.38 (60.3)
20MAH4J10 F250C 5/8” 1.19 (30.1) 2.13 (54.0)
15MAL4J4 SW250 1/4” 0.75 (19.1) 1.88 (47.6)
15MAL6J4 SW375 1/4” 0.75 (19.1) 2.00 (50.8)
15MAL6J6 SW375 3/8” 0.81 (20.6) 2.00 (50.8)
15MAM4J12 SF250CX 3/4” 1.38 (34.9) 2.25 (57.1)
15MAM4J16 SF250CX 1” 1.50 (38.1) 2.38 (60.3)
15MAM6J12 SF375CX 3/4” 1.38 (34.9) 2.44 (61.3)
15MAM6J16 SF375CX 1” 1.50 (38.1) 2.53 (64.9)
15MAM9J12 SF562CX 3/4” 1.38 (34.9) 2.69 (68.2)
15MAM9J16 SF562CX 1” 1.50 (38.1) 2.78 (70.6)
15MAM12J12 SF750CX 3/4” 1.38 (34.9) 2.88 (73.0)
15MAM12J16 SF750CX 1” 1.50 (38.1) 2.88 (73.0)
15MAM16J12 SF1000CX 3/4” 1.38 (34.9) 3.38 (85.7)
15MAM16J16 SF1000CX 1” 1.50 (38.1) 3.50 (89.0)
20MAM4J4 SF250CX 1/4” 0.75 (19.1) 1.63 (41.3)
20MAM4J6 SF250CX 3/8” 0.81 (20.6) 1.75 (44.5)
20MAM4J8 SF250CX 1/2” 1.00 (25.4) 2.00 (50.8)
20MAM6J4 SF375CX 1/4” 0.75 (19.1) 1.75 (44.5)
20MAM6J6 SF375CX 3/8” 0.81 (20.6) 1.81 (46.0)
20MAM6J8 SF375CX 1/2” 1.00 (25.4) 2.00 (50.8)
20MAM9J4 SF562CX 1/4” 0.94 (23.8) 2.13 (54.0)
20MAM9J6 SF562CX 3/8” 0.94 (23.8) 2.13 (54.0)
20MAM9J8 SF562CX 1/2” 1.00 (25.4) 2.25 (57.1)
20MAM9J10 SF562CX 5/8” 1.19 (30.1) 2.25 (57.1)
20MAM12J4 SF750CX 1/4” 1.19 (30.1) 2.38 (60.3)
20MAM12J6 SF750CX 3/8” 1.19 (30.1) 2.38 (60.3)
20MAM12J8 SF750CX 1/2” 1.19 (30.1) 2.50 (63.5)
20MAM16J4 SF1000CX 1/4” 1.38 (34.9) 3.13 (79.3)
20MAM16J6 SF1000CX 3/8” 1.38 (34.9) 3.13 (79.3)
20MAM16J8 SF1000CX 1/2” 1.38 (34.9) 3.13 (79.3)
15MAM24J16* 1.88 1" 1.88 (47.75) 4.25 (107.9)
*Note: O.D. is 2.13 (54.10) supplied with flats.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 29
Connection
JIC
Catalog
Number
Connection
JIC A Hex B
JIC to JIC Adapters
Connection
NPT
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
NPT to JIC Adapters
B
A
B
A
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
15MAP4J4 1/4” 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP4J6 1/4” 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP4J8 1/4” 1/2” 1.00 (25.4) 1.94 (49.1)
15MAP4J12 1/4” 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP6J4 3/8” 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP6J6 3/8” 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP6J8 3/8” 1/2” 1.00 (25.4) 1.81 (46.0)
15MAP6J12 3/8” 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP8J4 1/2” 1/4” 0.94 (23.8) 2.00 (50.8)
15MAP8J6 1/2” 3/8” 0.94 (23.8) 2.00 (50.8)
15MAP8J8 1/2” 1/2” 1.00 (25.4) 2.13 (54.0)
15MAP8J12 1/2” 3/4” 1.38 (34.9) 2.44 (61.9)
15MAP12J8 3/4” 1/2” 1.19 (30.2) 2.38 (60.3)
15MAP12J12 3/4” 3/4” 1.38 (34.9) 2.50 (63.5)
15MAP16J16 1” 1” 1.50 (38.1) 3.00 (76.2)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
15MAP4J4 1/4” 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP4J6 1/4” 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP4J8 1/4” 1/2” 1.00 (25.4) 1.94 (49.1)
15MAP4J12 1/4” 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP6J4 3/8” 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP6J6 3/8” 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP6J8 3/8” 1/2” 1.00 (25.4) 1.81 (46.0)
15MAP6J12 3/8” 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP8J4 1/2” 1/4” 0.94 (23.8) 2.00 (50.8)
15MAP8J6 1/2” 3/8” 0.94 (23.8) 2.00 (50.8)
15MAP8J8 1/2” 1/2” 1.00 (25.4) 2.13 (54.0)
15MAP8J12 1/2” 3/4” 1.38 (34.9) 2.44 (61.9)
15MAP12J8 3/4” 1/2” 1.19 (30.2) 2.38 (60.3)
15MAP12J12 3/4” 3/4” 1.38 (34.9) 2.50 (63.5)
15MAP16J16 1” 1” 1.50 (38.1) 3.00 (76.2)
卡套接头, 15,000 PSI - SW 系列
派克SW 系列适用于压力不高于15,000 PSI的低压场合，利用Autoclave速度咬合连接形成安全安装。 这种单卡套连接方式提供简易安装、可靠气密性能。
锥螺纹接头，迷你系列- !5,000 PSI
派克Autoclave 迷你系列锥螺纹卡套接头适用于 1/16" - 1/8" 仪表管，工作压力可达 15,000 psi (1034 bar).
锥螺纹接头, 20,000 PSI - SF 系列
派克Autoclave SF 系列为中压锥螺纹接头，与派克Autoclave 仪表管配套使用，应用广泛. 这些锥螺纹接头工作压力可达 20,000 psi (1379 bar).
管接头，15，000PSI-P 系列
派克Autoclave P 系列中压接头，用于流体和气体应用。这些高品质接头尺寸 1/4"- 1" NPT ，最大工作压力 15,000 PSI ，最高温度400°F (204°C)
15,000 PSI 单卡套接头 - QS 系列
派克Autoclave QS 系列接头承压范围高达 15,000 psi (1034 bar) ，适用通径从1/4" 至 1" 。
锥螺纹接头，酸性工矿-SOGWO 系列30,000 PSI
派克Autoclave SOGWO 系列高压含硫应用接头，工作压力可达30,000 psi (2068 bar) ，接管尺寸：1/4" -9/16"
22,500 PSI 扩口式卡套接头-FCC系列
派克抯扩口式卡套接头 (FCC)，承压高达22,500 PSI (1,550 bar)，适用于连接尺寸从1/4英寸到1英寸的弯头，三通接头，四通接头和螺纹转换接头。
20SM4082-LT
Show Selections »
20SM4082-LT
20SM4082-PM
Show Selections »
20SM4082-PM
20SM4084
Show Selections »
20SM4084
20SM4872
Show Selections »
20SM4872
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water
Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid
Tap KSh.Ts.F.200.016.P/P.02 Du200 Ru16 fl. from manual pr. water, steam
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr.
Crane KShT 61.102.010A.40 Du10 Ru40 p/pr. from manual pr. non-aggressive environment
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water
Crane KShT 60.102.250 Du250 Ru25 Ballomax
Tap KSh.Ts.F.300.016.P/P.02 Du300 Ru16 fl. from manual pr. water, steam
Tap KSh.Ts.F.400.016.P/P.02 Du400 Ru16 fl. from manual pr. water, steam
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr.
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water
Crane KSh.Z.050.016.03.F
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water
Crane KShT 61.103.250 Du250 Ru16 Ballomax flanged with KOF
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water
Crane KShT 61.103.300.R.16 Du300 Ru16 fl. from manual pr. liquid with COF and liquid
Crane KShT 60.103.065 Du65 Ru16 fl. from manual pr. liquid with COF and liquid
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF
Temper tap 28320015 Du15 Ru40 fl. from manual pr. Heating water with COF, etc.
Ball valve 050.016.02 Du50 Ru16 p/pr. with manual handle, water, steam
Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water
Yokogawa ALE 111
Relpol MRI-32/24VDC/relpol
Moxa PT-7828-R-24
Emerson 05D0083G01
Emerson 5X00106G01
Emerson 5X00109G01
Emerson 1C31233G01
Emerson 1C31238H01
Emerson 1C31122G01
Emerson 1C31125G01
Emerson 1C31166G01
Emerson 1C31169G02
Emerson 5X00247G01
Emerson 1B30035G01
Emerson 1X00786G01
Emerson 1X00788G01
Emerson 5A26137G14
Emerson 5X00585G03
Emerson 5A26144G03
Emerson 5X00525G05Connection
Size and Type
SpeedBite
SpeedBite Medium Pressure Flat Top Flat Bottom
Note:
All Parker Autoclave Engineers adapters are supplied complete with appropriate glands, collars, tube
nuts and sleeves unless specified without.
Other Adapters
Parker Autoclave Engineers supplies many other types of
adapters on special order. These include socketweld to O.D.
tube or nominal pipe size, extended or special designs.
Materials
All Parker Autoclave Engineers adapters are precision machined from cold-worked Type 316 stainless steel. Other
materials available on special order.
1/8” W125 6M24C2 6M26C2 4M28C2 6M24C6 6M26C6 6M29C6 15M224C6
1/4” SW250 6M42D1 6M46D2 4M48D2 6M44D6 6M46D6 6M49D6 6M412D6
3/8” SW375 6M62D1 6M64D2 4M68D2 6M64D6 6M66D6 6M69D6 6M612D6 6M616D6 15M624D6
1/2” SW500 4M82D1 4M84D2 4M86D2 4M84D6 4M86D6 4M89D6 4M812D6 4M816D6
1/4” SF250CX 15MX42K1 6MX44K2 6MX46K2 4MX48K2 20M44K6 20M46K6 20M49K6 20M412K6 20M416K6 15M424K6
3/8” SF375CX 15MX62K1 6MX64K2 6MX66K2 4MX68K2 20M64K6 20M66K6 20M69K6 20M612K6 20M616K6
9/16” SF562CX 15MX92K1 6MX94K2 6MX96K2 4MX98K2 20M94K6 20M96K6 20M99K6 20M912K6 20M916K6 15M924K6
3/4” SF750CX 15MX122K1 6MX124K2 6MX126K2 4MX128K2 20M124K6 20M126K6 20M129K6 20M1212K6 20M1216K6 15M1224K6
1” SF1000CX 15MX162K1 6MX164K2 6MX166K2 4MX168K2 20M164K6 20M166K6 20M169K6 20M1612K6 20M1616K6 15M1624K6
1-1/2” SF1500CX 15M244K2 15M246K2 15M244K6 15M246K6 15M249K6 15M2412K6 15M2416K6 15M2424K6
1” F1000C43 15M1624B6
1/4” F250C 15M42B1 6M44B2 6M46B2 4M48B2 20M44B6 20M46B6 20M49B6 20M412B6 15M4248B6
5/16” F312C150 6M54B2 6M56B2 4M58B2 20M54B6 20M56B6 20M59B6 20M512B6
3/8” F375C 15M62B1 6M64B2 6M66B2 4M68B2 20M64B6 20M66B6 20M69B6 20M612B6 20M616B6
9/16” F562C 15M92B1 6M94B2 6M96B2 4M98B2 20M94B6 20M96B6 20M99B6 20M912B6 20M916B6
9/16” F562C40 6M94G2 20M912G6
7/16” F437FB 15M72E1 6M74E2 6M76E2 4M78E2 15M74E6 15M76E6 15M79E6
9/16” F562FB 15M92E1 6M94E2 6M96E2 4M98E2 15M94E6 15M96E6 15M99E6 15M912E6 15M916E6
9/16” F562FT 15M92R1 6M94R2 6M96R2 4M98R2 15M94R6 15M96R6 15M99R6 15M912R6 15M916R6
3/4” F750FB 15M122E1 6M124E2 6M126E2 4M128E2 15M124E6 15M126E6 15M129E6 15M1212E6 15M1216E6
1/8” NPT 15M22N1 15M24N2 15M26N2 10M28N2 15M24N6 15M26N6 15M29N6
1/4” NPT 15M42N1 15M44N2 15M46N2 10M48N2 15M44N6 15M46N6 15M49N6 15M412N6 15M416N6 15M424N6
3/8” NPT 15M62N1 15M64N2 15M66N2 10M68N2 15M64N6 15M66N6 15M69N6 15M612N6 15M616N6
1/2” NPT 15M82N1 15M84N2 15M86N2 10M88N2 15M84N6 15M86N6 15M89N6 15M812N6 15M816N6 15M824N6
3/4” NPT 10M124N2 10M126N2 10M128N2 10M124N6 10M126N6 10M129N6 10M1212N6 10M1216N6
1” NPT 10M166N2 10M168N2 10M166N6 10M169N6 10M1612N6 10M1616N6
Medium Pressure
High Pressure National Pipe Thread (NPT)
* The maximum pressure rating for an adapter is determined by the connection component with the
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
LOWER.
CAUTION: See appropriate pressure section in reference to proper selection of tubing.
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
10,000
(689.46)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
43,000
(2964.69)
60,000
(4136.85)
150,000
(10342.14)
60,000
(4136.85)
60,000
(4136.85)
40,000
(2757.90)
10,000
(689.45)
10,000
(689.45)
10,000
(689.45)
10,000
(689.45)
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
10,000
(689.45)
10,000
(689.45)
Note: Special material couplings may be supplied with four flats in place of
standard hex. Pipe connections are rated 400°F (204°C) to -423°F (-17.8°C).
FEMALE END
MALE END
1/8” 1/4” 3/8” 1/2” 1/4” 3/8” 9/16” 3/4” 1” 1-1/2"
W125 SW250 SW375 SW500 SF250CX SF375CX SF562CX SF750CX SF1000CX SF1500CX
15,000 15,000 15,000 10,000 20,000 20,000 20,000 20,000 20,000 15,000
(1034.20) (1034.20) (1034.20) (689.45) (1378.93) (1378.93) (1378.93) (1378.93) (1378.93) (1034.20)
15,000
(1034.20)
Fits this
Female
Connection
Pressure
Rating
PSI (bar)*
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
High Pressure
6M24C3 6M26C3 6M29C3 15M22C8 15M24C8 15M26C8 15M28C8
6M44D3 6M46D3 6M49D3 15M42D8 15M44D8 15M46D8 15M48D8 10M412D8
6M64D3 6M66D3 6M69D3 15M62D8 15M64D8 15M66D8 15M68D8 10M612D8 10M616D8
4M84D3 4M86D3 4M89D3 10M82D8 10M84D8 10M86D8 10M88D8 10M812D8 10M816D8
20M44K3 20M45K3 20M46K3 20M49K3 15MX42K8 15MX44K8 15MX46K8 15MX48K8 10MX412K8
20M64K3 20M65K3 20M66K3 20M69K3 15MX62K8 15MX64K8 15MX66K8 15MX68K8 10MX612K8 10MX616K8
20M94K3 20M95K3 20M96K3 20M99K3 15MX92K8 15MX94K8 15MX96K8 15MX98K8 10MX912K8 10MX916K8
20M1216K3 20M124K3 20M125K3 20M126K3 20M129K3 20M129K40 15MX124K8 15MX126K8 15MX128K8 10MX1212K8 10MX1216K8
20M164K3 20M166K3 20M169K3 15MX164K8 15MX166K8 15MX168K8 10MX1612K8 10MX1616K8
15M2416K3 15M244K3 15M244K8 15M248K8 10M2412K8 10M2416K8
43M164B3 43M166B3 43M169B3 43M169B40
43M416B3 60M44B3 60M45B3 60M46B3 60M49B3 15M42B8 15M44B8 15M46B8 15M48B8 10M412B8 10M416B8
60M54B3 150M55B3-155 60M56B3 60M59B3 15M58B8 10M512B8
43M616B3 60M64B3 60M65B3 60M66B3 60M69B3 15M62B8 15M64B8 15M66B8 15M68B8 10M612B8 10M616B8
43M916B3 60M94B3 60M95B3 60M96B3 60M99B3 15M92B8 15M94B8 15M96B8 15M98B8 10M912B8 10M916B8
15M98G8
15M74E3 15M76E3 15M79E3 10M72E8 10M74E8 10M76E8 10M78E8 10M712E8
15M94E3 15M96E3 10M92E8 10M94E8 10M96E8 10M98E8 10M912E8 10M916E8
15M94R3 15M96R3 15M99R3 10M92R8 10M94R8 10M96R8 10M98R8 10M912R8 10M916R8
15M124E3 15M126E3 15M129E3 10M122E8 10M124E8 10M126E8 10M128E8 10M1212E8 10M1216E8
15M24N3 15M26N3 15M29N3 15M22N8 15M24N8
15M44N3 15M45N3 15M46N3 15M49N3 15M42N8 15M46N8 15M48N8 10N412N8
15M64N3 15M66N3 15M69N3 15M69N40 15M64N8 15M68N8
15M84N3 15M86N3 15M89N3 15M89N40 15M84N8 15M86N8 10M812N8
10M124N3 10M126N3 10M129N3 10M122N8 10M124N8 10M128N8
10M1616N3 10M166N3 10M169N3 10M168N8
National Pipe Thread (NPT)
Parker Autoclave Engineers Male/Female Adapters are available in a “one-piece” design. They are identical to the two piece designs in length and can be ordered by adding the suffix - OP to the two piece
adapter part numbers listed.
Double Cone Plug Double Cone Plug Flat Bottom Gasket Flat Top Gasket Male NPT
(Medium Pressure shown) (SpeedBite shown) (Medium Pressure shown) (SpeedBite shown) (High Pressure shown)
For prompt service, Parker Autoclave Engineers stocks select products.
Consult factory.
FEMALE END
43,000 60,000 150,000 60,000 60,000 40,000 15,000 15,000 15,000 15,000 10,000 10,000
(2964.69) (4136.85) (10342.14) (4136.85) (4136.85) (2757.90) (1034.20) (1034.20) (1034.20) (1034.20) (689.45) (689.45)
1” 1/4” 5/16” 3/8” 9/16” 9/16” 1/8” 1/4” 3/8” 1/2” 3/4” 1” F1000C43 F250C F312C150 F375C F562C F562C40 NPT NPT NPT NPT NPT NPT
4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Adapters/Couplings - Male/Female Adapters
Speed Bite
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Catalog
Number
Dimension inches (mm)
A Hex B
A
Hex
B
For prompt service, Parker Autoclaves Engineers stocks
select products. Consult factory.
Maximum pressure rating is based on the lowest rating of any
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Male End
Fits this
Connection
W125 W125
W125 SW250 6M24C2 0.63 (15.9) 1.29 (32.1)
W125 SW375 6M26C2 0.75 (19.1) 1.41 (35.8)
W125 SW500 4M28C2 1.00 (25.4) 1.53 (38.8)
W125 SF250CX 6M24C6 0.63 (15.9) 1.41 (35.8)
W125 SF375CX 6M26C6 0.75 (19.1) 1.41 (35.8)
W125 SF562CX 6M29C6 1.00 (25.4) 1.66 (42.1)
W125 SF750CX
W125 SF1000CX
W125 SF1500CX 15M224C6 2.25 (57.15) 3.41 (86.54)
W125 F1000C43
W125 F250C 6M24C3 0.75 (19.1) 1.16 (29.5)
W125 F312C150
W125 F375C 6M26C3 1.00 (25.4) 1.34 (34.1)
W125 F562C 6M29C3 1.38 (35.1) 1.59 (40.5)
W125 F562C40
W125 1/8 NPT 15M22C8 0.63 (15.9) 1.25 (31.8)
W125 1/4 NPT 15M24C8 0.75 (19.1) 1.47 (37.3)
W125 3/8 NPT 15M26C8 1.00 (25.4) 1.53 (38.8)
W125 1/2 NPT 15M28C8 1.18 (30.1) 1.81 (46.0)
W125 3/4 NPT
W125 1 NPT
SW250 W125 6M42D1 0.63 (15.9) 1.08 (27.4)
SW250 SW250
SW250 SW375 6M46D2 0.75 (19.1) 1.64 (41.7)
SW250 SW500 4M48D2 1.00 (25.4) 1.77 (44.9)
SW250 SF250CX 6M44D6 0.63 (15.9) 1.52 (38.5)
SW250 SF375CX 6M46D6 0.75 (19.1) 1.77 (44.9)
SW250 SF562CX 6M49D6 1.00 (25.4) 1.89 (48.0)
SW250 SF750CX 6M412D6 1.38 (35.1) 2.27 (57.7)
SW250 SF1000CX
SW250 F1000C43
SW250 F250C 6M44D3 .75 (19.1) 1.27 (32.2)
SW250 F312C150
SW250 F375C 6M46D3 1.00 (25.4) 1.70 (43.3)
SW250 F562C 6M49D3 1.38 (35.1) 1.77 (44.9)
SW250 F562C40
SW250 1/8 NPT 15M42D8 0.63 (15.9) 1.39 (35.3)
SW250 1/4 NPT 15M44D8 0.75 (19.1) 1.64 (41.7)
SW250 3/8 NPT 15M46D8 1.00 (25.4) 1.70 (43.3)
SW250 1/2 NPT 15M48D8 1.18 (30.1) 1.95 (49.6)
SW250 3/4 NPT 10M412D8 1.38 (35.1) 2.21 (56.0)
SW250 1 NPT
SW375 W125 6M62D1 0.75 (19.1) 1.16 (29.4)
SW375 SW250 6M64D2 0.75 (19.1) 1.41 (35.7)
SW375 SW375
SW375 SW500 4M68D2 1.00 (25.4) 1.78 (45.3)
SW375 SF250CX 6M64D6 0.75 (19.1) 1.41 (35.9)
SW375 SF375CX 6M66D6 0.75 (19.1) 1.59 (40.4)
SW375 SF562CX 6M69D6 1.00 (25.4) 1.72 (43.7)
SW375 SF750CX 6M612D6 1.38 (35.1) 2.28 (57.9)
SW375 SF1000CX 6M616D6 1.75 (44.5) 2.78 (70.7)
SW375 SF1500CX 15M624D6 2.25 (57.15) 3.53 (89.71)
SW375 F1000C43
SW375 F250C 6M64D3 0.75 (19.1) 1.41 (35.7)
SW375 F312C150
SW375 F375C 6M66D3 1.00 (25.4) 1.66 (42.2)
SW375 F562C 6M69D3 1.38 (35.1) 1.78 (45.3)
SW375 F562C40
SW375 1/8 NPT 15M62D8 0.75 (19.1) 1.41 (35.7)
SW375 1/4 NPT 15M64D8 0.75 (19.1) 1.66 (42.2)
SW375 3/8 NPT 15M66D8 1.00 (25.4) 1.78 (45.3)
SW375 1/2 NPT 15M68D8 1.18 (30.1) 1.97 (50.0)
SW375 3/4 NPT 10M612D8 1.38 (35.1) 2.28 (57.9)
SW375 1 NPT 10M616D8 1.75 (44.5) 2.78 (70.7)
SW500 W125 4M82D1 0.94 (23.8) 1.22 (31.0)
SW500 SW250 4M84D2 0.94 (23.8) 1.34 (34.1)
SW500 SW375 4M86D2 0.94 (23.8) 1.47 (37.3)
SW500 SW500
SW500 SF250CX 4M84D6 1.00 (25.4) 1.59 (40.5)
SW500 SF375CX 4M86D6 1.00 (25.4) 1.59 (40.5)
SW500 SF562CX 4M89D6 1.00 (25.4) 1.66 (42.2)
SW500 SF750CX 4M812D6 1.38 (35.1) 2.09 (53.2)
SW500 SF1000CX 4M816D6 1.75 (44.5) 2.72 (69.0)
SW500 F1000C43
SW500 F250C 4M84D3 0.94 (23.8) 1.41 (35.7)
SW500 F312C150
SW500 F375C 4M86D3 1.00 (25.4) 1.59 (40.5)
SW500 F562C 4M89D3 1.38 (35.1) 1.72 (43.7)
SW500 F562C40
SW500 1/8 NPT 10M82D8 1.00 (25.4) 1.34 (34.1)
SW500 1/4 NPT 10M84D8 1.00 (25.4) 1.47 (37.3)
SW500 3/8 NPT 10M86D8 1.00 (25.4) 1.72 (43.7)
SW500 1/2 NPT 10M88D8 1.18 (30.1) 2.16 (54.7)
SW500 3/4 NPT 10M812D8 1.38 (35.1) 2.22 (56.3)
SW500 1 NPT 10M816D8 1.75 (44.5) 2.47 (62.7)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Medium Pressure
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
B
A
Hex
For prompt service, Parker Autoclave Engineers stocks
select products. Consult factory.
Maximum pressure rating is based on the lowest rating of any
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown
SF250CX W125 15MX42K1 0.63 (15.9) 1.34 (34.1)
SF250CX SW250 6MX44K2 0.63 (15.9) 1.59 (40.5)
SF250CX SW375 6MX46K2 0.75 (19.1) 1.59 (40.5)
SF250CX SW500 4MX48K2 1.00 (25.4) 1.00 (25.4)
SF250CX SF250CX 20M44K6 0.63 (15.9) 1.47 (37.3)
SF250CX SF375CX 20M46K6 0.75 (19.1) 1.59 (40.5)
SF250CX SF562CX 20M49K6 1.00 (25.4) 1.97 (50.0)
SF250CX SF750CX 20M412K6 1.38 (35.1) 2.34 (59.5)
SF250CX SF1000CX 20M416K6 1.75 (44.5) 2.84 (72.2)
SF250CX SF1000CX 20M416K6 1.75 (44.5) 2.84 (72.2)
SF250CX SF1500CX 15M424K6 2.25 (57.2) 3.47 (88.1)
SF250CX F250C 20M44K3 0.75 (19.1) 1.28 (32.5)
SF250CX F312C150 20M45K3 1.00 (25.4) 2.09 (53.2)
SF250CX F375C 20M46K3 1.00 (25.4) 1.59 (40.5)
SF250CX F562C 20M49K3 1.38 (35.1) 1.97 (50.0)
SF250CX F562C40
SF250CX 1/8 NPT 15MX42K8 0.63 (15.9) 1.47(37.3)
SF250CX 1/4 NPT 15MX44K8 0.75 (19.1) 1.59 (40.5)
SF250CX 3/8 NPT 15MX46K8 1.00 (25.4) 1.66 (42.2)
SF250CX 1/2 NPT 15MX48K8 1.18 (30.1) 1.97 (50.0)
SF250CX 3/4 NPT 10MX412K8 1.38 (35.1) 2.09 (53.2)
SF250CX 1 NPT
SF375CX W125 15MX62K1 0.63 (15.9) 1.50 (38.1)
SF375CX SW250 6MX64K2 0.63 (15.9) 1.63 (41.3)
SF375CX SW375 6MX66K2 1.00 (25.4) 1.82 (46.0)
SF375CX SW500 4MX68K2 1.00 (25.4) 2.00 (50.8)
SF375CX SF250CX 20M64K6 0.63 (15.9) 1.39 (35.2)
SF375CX SF375CX 20M66K6 .75 (19.1) 1.66 (42.2)
SF375CX SF562CX 20M69K6 1.00 (25.4) 2.06 (52.4)
SF375CX SF750CX 20M612K6 1.38 (35.1) 2.50 (63.5)
SF375CX SF1000CX 20M616K6 1.75 (44.5) 3.06 (77.8)
SF375CX F1000C43
SF375CX F250C 20M64K3 0.75 (19.1) 1.44 (36.5)
SF375CX F312C150 20M65K3 1.00 (25.4) 2.25 (57.2)
SF375CX F375C 20M66K3 1.00 (25.4) 1.63 (41.3)
SF375CX F562C 20M69K3 1.38 (35.1) 1.88 (47.6)
SF375CX F562C40
SF375CX 1/8 NPT 15MX62K8 0.63 (15.9) 1.75 (44.5)
SF375CX 1/4 NPT 15MX64K8 0.75 (19.1) 1.81 (46.0)
SF375CX 3/8 NPT 15MX66K8 1.00 (25.4) 1.88 (47.6)
SF375CX 1/2 NPT 15MX68K8 1.18 (30.1) 2.12 (54.0)
SF375CX 3/4 NPT 10MX612K8 1.38 (35.1) 2.38 (60.3)
SF375CX 1 NPT 10MX616K8 1.75 (44.5) 2.63 (66.7)
SF562CX W125 15MX92K1 0.81 (20.6) 1.75 (44.5)
SF562CX SW250 6MX94K2 0.94 (23.8) 1.75 (44.5)
SF562CX SW375 6MX96K2 0.94 (23.8) 1.75 (44.5)
SF562CX SW500 4MX98K2 1.00 (25.4) 1.94 (49.2)
SF562CX SF250CX 20M94K6 0.94 (23.8) 1.34 (34.1)
SF562CX SF375CX 20M96K6 0.94 (23.8) 1.34 (59.5)
SF562CX SF562CX 20M99K6 1.00 (25.4) 2.00 (50.8)
SF562CX SF750CX 20M912K6 1.38 (35.1) 3.12 (79.3)
SF562CX SF1000CX 20M916K6 1.75 (44.5) 3.75 (95.3)
SF562CX SF1500CX 15M924K6 2.25 (57.2) 4.13 (104.9)
SF562CX F1000C43
SF562CX F250C 20M94K3 0.81 (20.6) 1.81 (46.0)
SF562CX F312C150 20M95K3 1.00 (25.4) 2.50 (63.5)
SF562CX F375C 20M96K3 1.00 (25.4) 2.00 (50.8)
SF562CX F562C 20M99K3 1.38 (35.1) 2.12 (54.0)
SF562CX F562C40
SF562CX 1/8 NPT 15MX92K8 0.94 (23.8) 1.75 (44.5)
SF562CX 1/4 NPT 15MX94K8 0.94 (23.8) 2.18 (55.5)
SF562CX 3/8 NPT 15MX96K8 0.94 (23.8) 2.18 (55.5)
SF562CX 1/2 NPT 15MX98K8 1.18 (30.1) 2.44 (61.9)
SF562CX 3/4 NPT 10MX912K8 1.50 (38.1) 2.50 (63.5)
SF562CX 1 NPT 10MX916K8 1.75 (44.5) 3.00 (76.2)
SF750CX W125
SF750CX SW250 6MX124K2 1.18 (30.1) 2.06 (52.4)
SF750CX SW375 6MX126K2 1.18 (30.1) 1.97 (50.0)
SF750CX SW500 4MX128K2 1.18 (30.1) 2.32 (58.7)
SF750CX SF250CX 20M124K6 1.18 (30.1) 2.06 (52.4)
SF750CX SF375CX 20M126K6 1.18 (30.1) 2.06 (52.4)
SF750CX SF562CX 20M129K6 1.18 (30.1) 1.69 (61.9)
SF750CX SF750CX 20M1212K6 1.38 (35.1) 2.56 (65.0)
SF750CX SF1000CX 20M1216K6 1.38 (35.1) 3.06 (77.8)
SF750CX SF1500CX 15M1224K6 2.25 (57.2) 3.88 (98.6)
SF750CX F1000C43 20M1216K3 1.75 (44.5) 3.06 (77.8)
SF750CX F250C 20M124K3 1.18 (30.1) 2.06 (52.3)
SF750CX F312C150 20M125K3 1.18 (30.1) 3.12 (79.3)
SF750CX F375C 20M126K3 1.18 (30.1) 2.06 (52.4)
SF750CX F562C 20M129K3 1.38 (35.1) 2.32 (58.9)
SF750CX F562C40 20M129K40 1.38 (35.1) 2.38 (60.4)
SF750CX 1/8 NPT
SF750CX 1/4 NPT 15MX124K8 1.18 (30.1) 2.50 (63.5)
SF750CX 3/8 NPT 15MX126K8 1.18 (30.1) 2.88 (73.0)
SF750CX 1/2 NPT 15MX128K8 1.18 (30.1) 2.88 (73.0)
SF750CX 3/4 NPT 10MX1212K8 1.38 (35.1) 3.12 (79.3)
SF750CX 1 NPT 10MX1216K8 1.75 (44.5) 3.50 (88.9)
6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
High Pressure
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
B
A
Hex
For prompt service, Parker Autoclave Engineers stocks
select products. Consult factory.
Maximum pressure rating is based on the lowest rating of any
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change. Note: Adapter configurations may
vary from outline shown
SF1000CX W125 6MX162K2 1.38 (35.1) 2.69 (68.3)
SF1000CX SW250 6MX164K2 1.38 (35.1) 2.63 (66.7)
SF1000CX SW375 6MX166K2 1.38 (35.1) 2.63 (66.7)
SF1000CX SW500 4MX168K2 1.18 (30.1) 2.69 (68.25)
SF1000CX SF250CX 20M164K6 1.38 (35.1) 2.63 (66.7)
SF1000CX SF375CX 20M166K6 1.38 (35.1) 2.63 (66.7)
SF1000CX SF562CX 20M169K6 1.38 (35.1) 2.63 (66.7)
SF1000CX SF750CX 20M1612K6 1.50 (38.1) 2.12 (54.0)
SF1000CX SF1000CX
SF1000CX SF1500CX 15M1624K6 2.25 (57.2) 4.13 (105.)
SF1000CX F1000C43
SF1000CX F250C 20M164K3 1.38 (35.1) 2.18 (55.6)
SF1000CX F312C150
SF1000CX F375C 20M166K3 1.38 (35.1) 2.18 (55.6)
SF1000CX F562C 20M169K3 1.50 (38.1) 2.44 (61.9)
SF1000CX F562C40
SF1000CX 1/8 NPT
SF1000CX 1/4 NPT 15MX164K8 1.50 (38.1) 3.18 (81.0)
SF1000CX 3/8 NPT 15MX166K8 1.75 (44.5) 3.18 (81.0)
SF1000CX 1/2 NPT 15MX168K8 1.75 (44.5) 3.18 (81.0)
SF1000CX 3/4 NPT 10MX1612K8 1.75 (44.5) 3.18 (81.0)
SF1000CX 1 NPT 10MX1616K8 1.75 (44.5) 3.18 (81.0)
F250C W125 15M42B1 0.63 (15.9) 1.25 (31.7)
F250C SW250 6M44B2 0.63 (15.9) 1.44 (36.5)
F250C SW375 6M46B2 0.75 (19.1) 1.56 (39.7)
F250C SW500 4M48B2 1.00 (25.4) 1.69 (42.8)
F250C SF250CX 20M44B6 0.63 (15.9) 1.31 (33.3)
F250C SF375CX 20M46B6 0.75 (19.1) 1.69 (42.8)
F250C SF562CX 20M49B6 1.00 (25.4) 1.81 (46.0)
F250C SF750CX 20M412B6 1.38 (35.1) 2.18 (55.5)
F250C SF1000CX
F250C SF1500CX 15M424B6 2.25 (57.2) 3.56 (90.42)
F250C F1000C43 43M416B3 1.75 (44.5) 3.00 (76.2)
F250C F250C 60M44B3 0.81 (20.6) 1.38 (35.1)
F250C F312C150 60M45B3 1.00 (25.4) 2.06 (52.4)
F250C F375C 60M46B3 1.00 (25.4) 1.56 (39.7)
F250C F562C 60M49B3 1.38 (35.1) 1.81 (46.0)
F250C F562C40
F250C 1/8 NPT 15M42B8 0.63 (15.9) 1.38 (34.9)
F250C 1/4 NPT 15M44B8 0.75 (19.1) 1.69 (42.8)
F250C 3/8 NPT 15M46B8 1.00 (25.4) 1.69 (42.8)
F250C 1/2 NPT 15M48B8 1.18 (30.1) 2.00 (50.8)
F250C 3/4 NPT 10M412B8 1.38 (35.1) 2.18 (55.5)
F250C 1 NPT 10M416B8 1.75 (44.5) 2.38 (60.3)
F1000C43 W125
F1000C43 SW250
F1000C43 SW375
F1000C43 SW500
F1000C43 SF250CX
F1000C43 SF375CX
F1000C43 SF562CX
F1000C43 SF750CX
F1000C43 SF1000CX
F1000C43 SF1500CX 15M1624B6 2.25 (57.2) 4.44 (112.7)
F1000C43 F1000C43
F1000C43 F250C 43M164B3 1.38 (35.1) 2.31 (58.7)
F1000C43 F312C150
F1000C43 F375C 43M166B3 1.38 (35.1) 2.31 (58.7)
F1000C43 F562C 43M169B3 1.50 (38.1) 2.56 (65.1)
F1000C43 F562C40 43M169B40 1.50 (38.1) 2.56 (65.1)
F1000C43 1/8 NPT
F1000C43 1/4 NPT
F1000C43 3/8 NPT
F1000C43 1/2 NPT
F1000C43 3/4 NPT
F1000C43 1 NPT
B
A
Hex
Adapter configurations may vary from outline shown
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
SF1500CX SW250 15M244K2 1.88 (47.75) 2.25 (57.17)
SF1500CX SW375 15M246K2 1.88 (47.75) 2.25 (57.17)
SF1500CX SF250CX 15M244K6 1.88 (47.75) 3.31 (84.12)
SF1500CX SF375CX 15M246K6 1.88 (47.75) 2.50 (63.50)
SF1500CX SF562CX 15M249K6 1.88 (47.75) 3.31 (84.12)
SF1500CX SF750CX 15M2412K6 1.88 (47.75) 3.81 (96.82)
SF1500CX SF1000CX 15M2416K6 1.88 (47.75) 4.06 (103.17)
SF1500CX SF1500CX 15M2424K6 2.50 (63.5) 4.44 (112.8)
SF1500CX F1000C43 15M2416K3 2.25 (57.15) 4.38 (111.25)
SF1500CX F250C 15M244K3 1.80 (47.75) 2.50 (63.50)
SF1500CX 1/4 NPT 15M244K8 1.75 (44.5) 3.56 (90.43)
SF1500CX 1/2 NPT 15M248K8 1.75 (44.5) 3.56 (90.43)
SF1500CX* 3/4 NPT 10M2412K8 1.75 (44.5) 4.06 (103.1)
SF1500CX* 1" NPT 10M2416K8 1.75 (44.5) 4.06 (103.1)
*Note: O.D. is 2.13 (54.10) supplied with flats.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
B
A
Hex
For prompt service, Parker Autoclave Engineers stocks
select products. Consult factory.
Maximum pressure rating is based on the lowest rating of any
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown
F312C150 W125
F312C150 SW250 6M54B2 0.75 (19.1) 2.13 (54.0)
F312C150 SW375 6M56B2 0.75 (19.1) 2.25 (57.2)
F312C150 SW500 4M58B2 1.00 (25.4)
F312C150 SF250CX 20M54B6 0.75 (19.1) 2.00 (50.8)
F312C150 SF375CX 20M56B6 0.75 (19.1) 2.25 (57.2)
F312C150 SF562CX 20M59B6 1.00 (25.4) 2.38 (60.4)
F312C150 SF750CX 20M512B6 1.38 (35.1) 3.00 (76.2)
F312C150 SF1000CX
F312C150 F1000C43
F312C150 F250C 60M54B3 1.00 (25.4) 2.06 (52.4)
F312C150 F312C150 150M5533-155 1.18 (29.97) 2.81 (71.37)
F312C150 F375C 60M56B3 1.00 (25.4) 2.25 (57.2)
F312C150 F562C 60M59B3 1.38 (35.1) 2.56 (65.1)
F312C150 F562C40
F312C150 1/8 NPT
F312C150 1/4 NPT
F312C150 3/8 NPT
F312C150 1/2 NPT 15M58B8 1.18 (30.1) 2.69 (68.3)
F312C150 3/4 NPT 10M512B8 1.38 (35.1) 2.88 (73.0)
F312C150 1 NPT
F375C W125 15M62B1 0.81 (20.6) 1.44 (36.5)
F375C SW250 6M64B2 0.81 (20.6) 1.69 (42.8)
F375C SW375 6M66B2 0.81 (20.6) 1.69 (42.8)
F375C SW500 4M68B2 1.00 (25.4) 1.75 (44.5)
F375C SF250CX 20M64B6 0.81 (20.6) 1.75 (44.5)
F375C SF375CX 20M66B6 0.81 (20.6) 1.88 (47.6)
F375C SF562CX 20M69B6 1.00 (25.4) 2.00 (50.8)
F375C SF750CX 20M612B6 1.38 (35.1) 2.25 (57.2)
F375C SF1000CX 20M616B6 1.75 (44.5) 3.25 (82.6)
F375C F1000C43 43M616B6 1.75 (44.5) 3.25 (82.6)
F375C F250C 60M64B3 0.81 (20.6) 1.63 (41.3)
F375C F312C150 60M65B3 1.00 (25.4) 2.25 (57.2)
F375C F375C 60M66B3 1.00 (25.4) 1.88 (47.63)
F375C F562C 60M69B3 1.38 (35.1) 1.63 (41.3)
F375C F562C40
F375C 1/8 NPT 15M62B8 0.81 (20.6) 1.50 (38.1)
F375C 1/4 NPT 15M64B8 0.81 (20.6) 1.75 (44.5)
F375C 3/8 NPT 15M66B8 1.00 (25.4) 2.00 (50.8)
F375C 1/2 NPT 15M68B8 1.18 (30.1) 2.25 (57.2)
F375C 3/4 NPT 10M612B8 1.38 (35.1) 2.50 (63.5)
F375C 1 NPT 10M616B8 1.75 (44.5) 2.75 (69.9)
F562C W125 15M92B1 1.18 (30.1) 1.50 (38.1)
F562C SW250 6M94B2 1.18 (30.1) 1.69 (42.8)
F562C SW375 6M96B2 1.18 (30.1) 1.69 (42.8)
F562C SW500 4M98B2 1.18 (30.1) 1.75 (44.5)
F562C SF250CX 20M94B6 1.18 (30.1) 1.69 (42.8)
F562C SF375CX 20M96B6 1.18 (30.1) 1.81 (46.0)
F562C SF562CX 20M99B6 1.18 (30.1) 1.94 (49.2)
F562C SF750CX 20M912B6 1.38 (35.1) 2.31 (58.7)
F562C SF1000CX 20M916B6 1.75 (44.5) 3.31 (84.1)
F562C F1000C43 43M916B3 1.75 (44.5) 3.31 (84.1)
F562C F250C 60M94B3 1.18 (30.1) 1.69 (42.8)
F562C F312C150 60M95B3 1.18 (30.1) 2.31 (58.7)
F562C F375C 60M96B3 1.18 (30.1) 1.88 (47.6)
F562C F562C 60M99B3 1.38 (35.1) 2.31 (58.7)
F562C F562C40
F562C 1/8 NPT 15M92B8 0.94 (23.8) 1.81 (46.0)
F562C 1/4 NPT 15M94B8 0.94 (23.8) 1.81 (46.0)
F562C 3/8 NPT 15M96B8 0.94 (23.8) 1.81 (46.0)
F562C 1/2 NPT 15M98B8 1.18 (30.1) 2.13 (54.0)
F562C 3/4 NPT 10M912B8 1.50 (38.1) 2.31 (58.7)
F562C 1 NPT 10M916B8 1.75 (44.5) 1.69 (42.8)
F562C40 W125
F562C40 SW250
F562C40 SW375
F562C40 SW500
F562C40 SF250CX
F562C40 SF375CX
F562C40 SF562CX
F562C40 SF750CX 20M912G6 1.38 (35.1) 2.50 (63.5)
F562C40 SF1000CX
F562C40 F1000C43
F562C40 F250C
F562C40 F312C150
F562C40 F375C
F562C40 F562C
F562C40 F562C40
F562C40 1/8 NPT
F562C40 1/4 NPT
F562C40 3/8 NPT
F562C40 1/2 NPT 15M98G8 1.18 (30.1) 2.13 (54.0)
F562C40 3/4 NPT
F562C40 1 NPT
8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Flat Bottom
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Flat Top
B
A
Hex
Flat Bottom Flat Top
Maximum pressure rating is based on the lowest rating of any
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select
products. Consult factory. B
A
Hex
F437FB W125 15M72E1 0.50 (12.7) 1.41 (35.8)
F437FB SW250 6M74E2 0.63 (15.9) 1.53 (38.9)
F437FB SW375 6M76E2 0.75 (19.1) 1.91 (48.4)
F437FB SW500 4M78E2 1.00 (25.4) 2.16 (54.8)
F437FB SF250CX 15M74E6 0.63 (15.9) 1.53 (38.9)
F437FB SF375CX 15M76E6 0.75 (19.1) 1.78 (45.2)
F437FB SF562CX 15M79E6 1.00 (25.4) 1.91 (48.4)
F437FB SF750CX
F437FB SF1000CX
F437FB F1000C43
F437FB F250C 15M74E3 0.75 (19.1) 1.53 (38.9)
F437FB F312C150
F437FB F375C 15M76E3 1.00 (25.4) 1.78 (45.2)
F437FB F562C 15M79E3 1.38 (35.1) 2.03 (51.6)
F437FB F562C40
F437FB 1/8 NPT 10M72E8 0.63 (15.9) 1.59 (40.4)
F437FB 1/4 NPT 10M74E8 0.75 (19.1) 1.78 (45.2)
F437FB 3/8 NPT 10M76E8 1.00 (25.4) 1.91 (48.4)
F437FB 1/2 NPT 10M78E8 1.18 (30.1) 2.16 (54.8)
F437FB 3/4 NPT
F437FB 1 NPT
F562FB W125 15M92E1 0.63 (15.9) 1.44 (36.5)
F562FB SW250 6M94E2 0.75 (19.1) 2.06 (52.4)
F562FB SW375 6M96E2 0.75 (19.1) 2.25 (57.2)
F562FB SW500 4M98E2 1.00 (25.4) 2.18 (55.5)
F562FB SF250CX 15M94E6 0.63 (15.9) 1.81 (46.0)
F562FB SF375CX 15M96E6 0.75 (19.1) 2.06 (52.4)
F562FB SF562CX 15M99E6 1.00 (25.4) 1.18 (30.1)
F562FB SF750CX 15M912E6 1.38 (35.1) 2.81 (71.4)
F562FB SF1000CX
F562FB F1000C43
F562FB F250C 15M94E3 0.81 (20.6) 1.94 (49.2)
F562FB F312C150
F562FB F375C 15M96E3 1.00 (25.4) 2.44 (61.9)
F562FB F562C
F562FB F562C40
F562FB 1/8 NPT 10M92E8 0.63 (15.9) 1.94 (49.2)
F562FB 1/4 NPT 10M94E8 0.75 (19.1) 2.18 (55.5)
F562FB 3/8 NPT 10M96E8 1.00 (25.4) 2.31 (58.7)
F562FB 1/2 NPT 10M98E8 1.18 (30.1) 1.63 (41.3)
F562FB 3/4 NPT 10M912E8 1.38 (35.1) 2.06 (52.4)
F562FB 1 NPT 10M916E8 1.88 (47.6) 2.25 (57.2)
F750FB W125 15M122E1 0.75 (19.1) 1.69 (42.8)
F750FB SW250 6M124E2 0.81 (20.6) 2.06 (52.4)
F750FB SW375 6M126E2 0.75 (19.1) 1.94 (49.2)
F750FB SW500 4M128E2 1.00 (25.4) 2.18 (55.5)
F750FB SF250CX 15M124E6 0.81 (20.6) 1.94 (49.2)
F750FB SF375CX 15M126E6 0.81 (20.6) 2.06 (52.4)
F750FB SF562CX 15M129E6 1.00 (25.4) 1.31 (33.3)
F750FB SF750CX 15M1212E6 1.38 (35.1) 1.69 (42.8)
F750FB SF1000CX 15M1216E6 1.75 (44.5) 3.31 (84.1)
F750FB F1000C43
F750FB F250C 15M124E3 1.00 (25.4) 1.94 (49.2)
F750FB F312C150
F750FB F375C 15M126E3 1.00 (25.4) 2.18 (55.5)
F750FB F562C 15M129E3 1.38 (35.1) 2.31 (58.7)
F750FB F562C40
F750FB 1/8 NPT 10M122E8 0.94 (23.8) 1.81 (46.0)
F750FB 1/4 NPT 10M124E8 1.00 (25.4) 2.31 (58.7)
F750FB 3/8 NPT 10M126E8 1.00 (25.4) 2.18 (55.5)
F750FB 1/2 NPT 10M128E8 1.18 (30.1) 2.69 (68.3)
F750FB 3/4 NPT 10M1212E8 1.38 (35.1) 2.69 (68.3)
F750FB 1 NPT 10M1216E8 1.88 (47.6) 3.18 (81.0)
F562FT W125 15M92R1 0.75 (19.1) 0.94 (23.9)
F562FT SW250 6M94R2 0.75 (19.1) 1.50 (38.1)
F562FT SW375 6M96R2 0.75 (19.1) 1.50 (38.1)
F562FT SW500 4M98R2 1.00 (25.4) 1.63 (41.3)
F562FT SF250CX 15M94R6 0.75 (19.1) 1.25 (31.8)
F562FT SF375CX 15M96R6 0.75 (19.1) 1.50 (38.1)
F562FT SF562CX 15M99R6 1.00 (25.4) 1.63 (41.3)
F562FT SF750CX
F562FT SF1000CX
F562FT F1000C43
F562FT F250C 15M94R3 0.75 (19.1) 1.25 (31.8)
F562FT F312C150
F562FT F375C 15M96R3 1.00 (25.4) 1.50 (38.1)
F562FT F562C 15M99R3 1.38 (35.1) 1.75 (44.5)
F562FT F562C40
F562FT 1/8 NPT 10M92R8 0.75 (19.1) 1.25 (31.8)
F562FT 1/4 NPT 10M94R8 0.75 (19.1) 1.44 (36.5)
F562FT 3/8 NPT 10M96R8 0.94 (23.8) 1.56 (39.7)
F562FT 1/2 NPT 10M98R8 1.18 (30.1) 2.00 (50.8)
F562FT 3/4 NPT
F562FT 1 NPT
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
National Pipe Thread (NPT)
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
For prompt service, Parker Autoclave Engineers stocks
select products. Consult factory.
*Maximum pressure rating is based on the lowest rating of any
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
1/8 NPT W125 15M22N1 0.50 (12.7) 1.00 (25.4)
1/8 NPT SW250 15M24N2 0.63 (15.9) 1.25 (31.8)
1/8 NPT SW375 15M26N2 0.75 (19.1) 1.44 (36.5)
1/8 NPT SW500 10M28N2 1.00 (25.4) 1.50 (38.1)
1/8 NPT SF250CX 15M24N6 0.63 (15.9) 1.81 (46.0)
1/8 NPT SF375CX 15M26N6 0.75 (19.1) 1.38 (35.1)
1/8 NPT SF562CX 15M29N6 1.00 (25.4) 1.75 (44.5)
1/8 NPT SF750CX
1/8 NPT SF1000CX
1/8 NPT F1000C43
1/8 NPT F250C 15M24N3 0.75 (19.1) 1.25 (31.8)
1/8 NPT F312C150
1/8 NPT F375C 15M26N3 1.00 (25.4) 1.50 (38.1)
1/8 NPT F562C 15M29N3 1.38 (35.1) 1.63 (41.3)
1/8 NPT F562C40
1/8 NPT 1/8 NPT
1/8 NPT 1/4 NPT 15M24N8 0.75 (19.1) 1.38 (35.1)
1/8 NPT 3/8 NPT
1/8 NPT 1/2 NPT
1/8 NPT 3/4 NPT
1/8 NPT 1 NPT
1/4 NPT W125 15M42N1 0.63 (15.9) 1.13 (28.6)
1/4 NPT SW250 15M44N2 0.63 (15.9) 1.38 (35.1)
1/4 NPT SW375 15M46N2 0.75 (19.1) 1.50 (38.1)
1/4 NPT SW500 10M48N2 1.00 (25.4) 1.75 (44.5)
1/4 NPT SF250CX 15M44N6 0.63 (15.9) 1.38 (35.1)
1/4 NPT SF375CX 15M46N6 0.75 (19.1) 1.56 (39.7)
1/4 NPT SF562CX 15M49N6 1.00 (25.4) 1.75 (44.5)
1/4 NPT SF750CX 15M412N6 1.38 (35.1) 2.25 (57.2)
1/4 NPT SF1000CX 15M416N6 1.75 (44.5) 2.88 (73.0)
1/4 NPT SF1500CX 15M424N6 2.25 (57.15) 3.48 (88.39)
1/4 NPT F1000C43
1/4 NPT F250C 15M44N3 0.75 (19.1) 1.38 (35.1)
1/4 NPT F312C150 15M45N3 1.00 (25.4) 2.50 (63.5)
1/4 NPT F375C 15M46N3 1.00 (25.4) 1.63 (41.3)
1/4 NPT F562C 15M49N3 1.38 (35.1) 1.75 (44.5)
1/4 NPT F562C40
1/4 NPT 1/8 NPT 15M42N8 0.63 (15.9) 1.38 (35.1)
1/4 NPT 1/4 NPT
1/4 NPT 3/8 NPT 15M46N8 1.00 (25.4) 1.75 (44.5)
1/4 NPT 1/2 NPT 15M48N8 1.18 (30.1) 2.25 (57.2)
1/4 NPT 3/4 NPT 10M412N8
1/4 NPT 3/4 NPT 10M412N8 1.38 (35.1) 2.25 (57.2)
1/4 NPT 1 NPT
3/8 NPT W125 15M62N1 0.75 (19.1) 1.13 (28.6)
3/8 NPT SW250 15M64N2 0.75 (19.1) 1.38 (35.1)
3/8 NPT SW375 15M66N2 0.75 (19.1) 1.50 (38.1)
3/8 NPT SW500 10M68N2 1.00 (25.4) 1.75 (44.5)
3/8 NPT SF250CX 15M64N6 0.75 (19.1) 1.38 (35.1)
3/8 NPT SF375CX 15M66N6 0.75 (19.1) 1.50 (38.1)
3/8 NPT SF562CX 15M69N6 1.00 (25.4) 1.75 (44.5)
3/8 NPT SF750CX 15M612N6 1.38 (35.1) 2.00 (50.8)
3/8 NPT SF1000CX 15M616N6 1.75 (44.5) 2.88 (73.0)
3/8 NPT F1000C43
3/8 NPT F250C 15M64N3 0.75 (19.1) 1.38 (35.1)
3/8 NPT F312C150
3/8 NPT F375C 15M66N3 1.00 (25.4) 1.63 (41.3)
3/8 NPT F562C 15M69N3 1.38 (35.1) 1.75 (44.5)
3/8 NPT F562C40 15M69N40 1.38 (35.1) 1.75 (44.5)
3/8 NPT 1/8 NPT
3/8 NPT 1/4 NPT 15M64N8 0.75 (19.1) 1.63 (41.3)
3/8 NPT 3/8 NPT
3/8 NPT 1/2 NPT 15M68N8 1.18 (30.1) 2.25 (57.2)
3/8 NPT 3/4 NPT
3/8 NPT 1 NPT
1/2 NPT W125 15M82N1 1.00 (25.4) 2.50 (63.5)
1/2 NPT SW250 15M84N2 1.00 (25.4) 1.63 (41.3)
1/2 NPT SW375 15M86N2 1.00 (25.4) 1.63 (41.3)
1/2 NPT SW500 10M88N2 1.00 (25.4) 1.88 (47.6)
1/2 NPT SF250CX 15M84N6 1.00 (25.4) 1.38 (35.1)
1/2 NPT SF375CX 15M86N6 1.00 (25.4) 1.63 (41.3)
1/2 NPT SF562CX 15M89N6 1.00 (25.4) 1.94 (49.2)
1/2 NPT SF750CX 15M812N6 1.38 (35.1) 2.18 (55.5)
1/2 NPT SF1000CX 15M816N6 1.75 (44.5) 2.81 (71.4)
1/2 NPT SF1500CX 15M824N6 2.25 (57.2) 3.62 (91.9)
1/2 NPT F1000C43
1/2 NPT F250C 15M84N3 1.00 (25.4) 1.50 (38.1)
1/2 NPT F312C150
1/2 NPT F375C 15M86N3 1.00 (25.4) 1.75 (44.5)
1/2 NPT F562C 15M89N3 1.38 (35.1) 1.88 (47.6)
1/2 NPT F562C40 15M89N40 1.38 (35.1) 1.75 (44.5)
1/2 NPT 1/8 NPT
1/2 NPT 1/4 NPT 15M84N8 1.00 (25.4) 1.75 (44.5)
1/2 NPT 3/8 NPT 15M86N8 1.00 (25.4) 1.81 (71.4)
1/2 NPT 1/2 NPT
1/2 NPT 3/4 NPT 10M812N8 1.38 (35.1) 2.25 (57.2)
1/2 NPT 1 NPT
B
A
Hex
10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
B
A
Hex
National Pipe Thread (NPT)
Maximum pressure rating is based on the lowest rating of any For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
component. Actual working pressure may be determined by
tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
3/4 NPT W125
3/4 NPT SW250 10M124N2 1.18 (30.1) 1.75 (44.5)
3/4 NPT SW375 10M126N2 1.18 (30.1) 1.75 (44.5)
3/4 NPT SW500 10M128N2 1.18 (30.1) 1.75 (44.5)
3/4 NPT SF250CX 10M124N6 1.18 (30.1) 1.75 (44.5)
3/4 NPT SF375CX 10M126N6 1.18 (30.1) 1.75 (44.5)
3/4 NPT SF562CX 10M129N6 1.38 (35.1) 2.00 (50.8)
3/4 NPT SF750CX 10M1212N6 1.38 (35.1) 2.25 (57.2)
3/4 NPT SF1000CX 10M1216N6 1.75 (44.5) 2.88 (73.0)
3/4 NPT F1000C43
3/4 NPT F250C 10M124N3 1.18 (30.1) 1.75 (44.5)
3/4 NPT F312C150
3/4 NPT F375C 10M126N3 1.18 (30.1) 2.00 (50.8)
3/4 NPT F562C 10M129N3 1.38 (35.1) 2.13 (54.0)
3/4 NPT F562C40
3/4 NPT 1/8 NPT 10M122N8 1.18 (30.1) 1.63 (41.3)
3/4 NPT 1/4 NPT 10M124N8 1.18 (30.1) 1.63 (41.3)
3/4 NPT 3/8 NPT
3/4 NPT 1/2 NPT
3/4 NPT 3/4 NPT
3/4 NPT 1 NPT
1 NPT W125
1 NPT SW250
1 NPT SW375 10M166N2 1.38 (35.1) 1.75 (44.5)
1 NPT SW500 10M168N2 1.38 (35.1) 1.75 (44.5)
1 NPT SF250CX
1 NPT SF375CX 10M166N6 1.38 (35.1) 2.00 (50.8)
1 NPT SF562CX 10M169N6 1.38 (35.1) 2.25 (57.2)
1 NPT SF750CX 10M1612N6 1.38 (35.1) 2.63 (66.7)
1 NPT SF1000CX 10M1616N6 1.75 (44.5) 3.06 (77.8)
1 NPT F1000C43 15M1616N3 1.75 (44.5) 3.06 (77.8)
1 NPT F250C
1 NPT F312C150
1 NPT F375C 10M166N3 1.38 (35.1) 2.00 (50.8)
1 NPT F562C 10M169N3 1.38 (35.1) 2.25 (57.2)
1 NPT F562C40
1 NPT 1/8 NPT
1 NPT 1/4 NPT
1 NPT 3/8 NPT
1 NPT 1/2 NPT 10M168N8 1.38 (35.1) 2.25 (57.2)
1 NPT 3/4 NPT
1 NPT 1 NPT
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Adapters/Couplings - Couplings
The couplings shown here permit the joining of any combination of standard size tubing or tubing and standard pipe with
female-to-female couplings. Other couplings available on
special order.
Pressure Rating - The pressure rating of Parker Autoclave
Engineers couplings is based on the lower rated connection
used.
How to use the Ordering Chart below:
1. Locate “A” connection in the vertical column.
2. Locate the desired “B” connection across the top of the chart.
3. The catalog number of the required coupling is located at the intersection of the two columns.
*Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
**1/2 low pressure rated to 10,000 psi.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
representative.CAUTION: See appropriate pressure section in reference to proper selection of tubing.
"A"
CONNECTION
FEMALE
"B"
CONNECTION
FEMALE
Note: Special material couplings may be supplied with four flats in place of
standard hex.
“A”
Connection
“B” Connection
SpeedBite Medium Pressure High Pressure
Tube
Outside
in (mm)
Connector
Type
Pressure
psi
(bar)*
1/8
W125
1/4
SW250
3/8
SW375
1/2**
SW500
1/4
SF
250CX
3/8
SF
375CX
9/16
SF
562CX
3/4
SF
750CX
1
SF
1000CX
1-1/2
SF
1500CX
1
SF
1000C43
1/4
F
250C
3/8
F
375C
9/16
F
562C
9/16
F
562C40
9/16
F
312C150
SpeedBite
1/8
(3.18) W125 15,000
(1034)
15F
2211
6F
2412
6F
2612
4F
2812
15F
2416
15F
2616
15F
2916
15F
21616
15F
2413
15F
2613
15F
2913
1/4
(6.35) SW250 15,000
(1034)
6F
4422
6F
4622
4F
4822
6F
4426
6F
4626
4F
4926
6F
4423
6F
4623
6F
4923
3/8
(9.52) SW375 15,000
(1034)
6F
6622
4F
6822
6F
6426
6F
6626
6F
6926
6F
61226
6F
61626
6F
6423
6F
6623
6F
6923
1/2
(12.70) SW500 10,000
(690)
4F
8822
4F
8426
4F
8626
4F
8926
4F
81226
4F
81626
4F
8423
4F
8623
4F
8923
Medium Pressure
1/4
(6.35) SF250CX 20,000
(1379)
20FX
4466
20F
4666
20F
4966
20F
41266
20F
41666
15FX
42466
20F
41663
20F
4463
20F
4663
20F
4963
20F
4563
3/8
(9.52) SF375CX 20,000
(1379)
20FX
6666
20F
6966
20F
61266
20F
61666
20F
61663
20F
6463
20F
6663
20F
6963
20F
6563
9/16
(14.27) SF562CX 20,000
(1379)
20FX
9966
20F
91266
20F
91666
15FX
92466
20F
9463
20F
9663
20F
9963
20F
9563
3/4
(19.05) SF750CX 20,000
(1379)
20FX
12
20F
121666
20F
12463
20F
12663
20F
12963
20F
12563
1
(25.40) SF1000CX 20,000
(1379)
20FX
16
20F
16463
20F
16663
20F
16963
20F
16563
1-1/2
(38.1) SF1500CX 15,000
(1034)
High Pressure
1
(25.40) F1000C43 43,000
(2965)
43F
16
1/4
(6.35) F250C 60,000
(4137)
43F
41633
60F
4433
60F
4633
60F
4933
60F
4533
3/8
(9.52) F375C 60,000
(4137)
43F
61633
60F
6633
60F
6933
60F
6533
9/16
(14.27) F562C 60,000
(4137)
60F
91633
60F
9933
60F
9533
9/16
(14.27) F562C40 60,000
(4137)
40F
9933
5/16
(7.92) F312C150 150,000
(10342)
150F
5533
National Pipe Thread (NPT)
1/8
(3.18) NPT 15,000
(1034)
15F
2281
15F
2482
15F
2682
15F
2882
15F
2486
15F
2686
15F
2986
15F
21286
15F
2483
15F
2683
15F
2983
15F
2583
1/4
(6.35) NPT 15,000
(1034)
15F
4281
15F
4482
15F
4682
15F
4882
15F
4486
15F
4686
15F
4986
15F
41286
15F
41686
15FX
42486
15F
4483
15F
4683
15F
4983
15F
4583
3/8
(9.52) NPT 15,000
(1034)
15F
6281
15F
6482
15F
6682
15F
6882
15F
6486
15F
6686
15F
6986
15F
61286
15F
61686
15F
6483
15F
6683
15F
6983
15F
6583
1/2
(12.70) NPT 15,000
(1034)
15F
8281
15F
8482
15F
8682
15F
8882
15F
8486
15F
8686
15F
8986
15F
81286
15F
81686
15F
8483
15F
8683
15F
8983
15F
8583
3/4
(19.05) NPT 10,000
(689)
10F
12882
10F
12686
10F
12986
10F
121286
10F
121686
15F
12983
1
(25.40) NPT 10,000
(689)
10F
16986
10F
161686
15F
16483
15F
16983
12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Coupling Dimensions - Speedbite
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
W125 W125 15F2211 0.50 (12.7) 1.25 (31.7)
W125 SW250 6F2412 0.63 (15.9) 1.44 (36.6)
W125 SW375 6F2612 0.75 (19.1) 1.50 (38.1)
W125 SW500 4F2812 1.00 (25.4) 1.63 (41.4)
W125 SF250CX 15F2416 0.63 (15.9) 1.38 (35.1)
W125 SF375CX 15F2616 0.75 (19.1) 1.50 (38.1)
W125 SF562CX 15F2916 1.00 (25.4) 1.75 (44.5)
W125 SF1000CX 15F21616 1.75 (44.5) 2.75 (69.9)
W125 F250C 15F2413 0.75 (19.1) 1.25 (31.7)
W125 F375C 15F2613 1.00 (25.4) 1.50 (38.1)
W125 F562C 15F2913 1.38 (35.1) 1.75 (44.5)
SW250 SW250 6F4422 0.63 (15.9) 1.63 (41.4)
SW250 SW375 6F4622 0.75 (19.1) 1.69 (42.9)
SW250 SW500 4F4822 1.00 (25.4) 1.88 (47.8)
SW250 SF250CX 6F4426 0.63 (15.9) 1.63 (41.4)
SW250 SF375CX 6F4626 0.75 (19.1) 1.75 (44.5)
SW250 SF562CX 6F4926 1.00 (25.4) 2.00 (50.8)
SW250 SF1000CX 6F41626 1.75 (44.5) 3.00 (76.2)
SW250 F250C 6F4423 0.75 (19.1) 1.50 (38.1)
SW250 F375C 6F4623 1.00 (25.4) 1.69 (42.9)
SW250 F562C 6F4923 1.38 (35.1) 2.06 (52.3)
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
SW375 SW375 6F6622 0.75 (19.1) 1.75 (44.5)
SW375 SW500 4F6822 1.00 (25.4) 1.88 (47.8)
SW375 SF250CX 6F6426 0.75 (19.1) 0.88 (22.2)
SW375 SF375CX 6F6626 0.75 (19.1) 1.75 (44.5)
SW375 SF562CX 6F6926 1.00 (25.4) 2.00 (50.8)
SW375 SF750CX 6F61226 1.38 (35.1) 2.25 (57.2)
SW375 SF1000CX 6F61626 1.75 (44.5) 3.00 (76.2)
SW375 F250C 6F6423 0.75 (19.1) 1.63 (41.4)
SW375 F375C 6F6623 1.00 (25.4) 1.81 (46.0)
SW375 F562C 6F6923 1.38 (35.1) 2.00 (50.8)
SW500 SW500 4F8822 1.00 (25.4) 2.00 (50.8)
SW500 SF250CX 4F8426 1.00 (25.4) 1.63 (41.4)
SW500 SF375CX 4F8626 1.00 (25.4) 1.88 (47.8)
SW500 SF562CX 4F8926 1.00 (25.4) 2.00 (50.8)
SW500 SF750CX 4F81226 1.38 (35.1) 2.25 (57.2)
SW500 SF1000CX 4F81626 1.75 (44.5) 3.00 (76.2)
SW500 F250C 4F8423 1.00 (25.4) 1.69 (42.9)
SW500 F375C 4F8623 1.00 (25.4) 1.88 (47.8)
SW500 F562C 4F8923 1.38 (35.1) 2.06 (52.3)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.
Coupling Dimensions - Medium Pressure
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex
B
SF750CX SF750CX 20FX12 1.38 (35.1) 2.50 (63.5)
SF750CX SF1000CX 20F121666 1.75 (44.5) 3.00 (76.2)
SF750CX F250C 20F12463 1.38 (35.1) 2.50 (63.5)
SF750CX F375C 20F12663 1.38 (35.1) 2.38 (60.33)
SF750CX F562C 20F12963 1.38 (35.1) 2.75 (69.9)
SF750CX F312C150 20F12563 1.38 (35.1) 2.75 (69.9)
SF1000CX SF1000CX 20FX16 1.75 (44.5) 3.50 (88.9)
SF1000CX F250C 20F16463 1.75 (44.5) 2.75 (69.9)
SF1000CX F375C 20F16663 1.75 (44.5) 2.88 (73.0)
SF1000CX F562C 20F16963 1.75 (44.5) 3.25 (82.6)
SF1000CX F312C150 20F16563 1.75 (44.5) 3.25 (82.6)
SF250CX SF250CX 20FX4466 0.63 (15.9) 1.63 (41.4)
SF250CX SF375CX 20F4666 0.75 (19.1) 1.75 (44.5)
SF250CX SF562CX 20F4966 1.00 (25.4) 2.00 (50.8)
SF250CX SF750CX 20F41266 1.38 (35.1) 2.25 (57.2)
SF250CX SF1000CX 20F41666 1.75 (44.5) 2.75 (69.9)
SF250CX SF1500CX 15FX42466 2.25 (57.1) 3.38 (85.6)
SF250CX F250C 20F4463 0.75 (19.1) 1.38 (35.1)
SF250CX F375C 20F4663 1.00 (25.4) 1.63 (41.4)
SF250CX F562C 20F4963 1.38 (35.1) 1.88 (47.8)
SF250CX F312C150 20F4563 1.00 (25.4) 2.13 (54.1)
SF250CX F1000C43 43F41663 1.75 (44.5) 2.75 (69.9)
SF375CX SF375CX 20FX6666 0.75 (19.1) 1.75 (44.5)
SF375CX SF562CX 20F6966 1.00 (25.4) 2.00 (50.8)
SF375CX SF750CX 20F61266 1.38 (35.1) 2.25 (57.2)
SF375CX SF1000CX 20F61666 1.75 (44.5) 2.88 (73.0)
SF375CX F250C 20F6463 0.75 (19.1) 1.63 (41.4)
SF375CX F375C 20F6663 1.00 (25.4) 2.00 (50.8)
SF375CX F562C 20F6963 1.38 (35.1) 2.00 (50.8)
SF375CX F312C150C 20F6563 1.00 (25.4) 2.25 (57.2)
SF375CX F1000C43 43F61663 1.75 (44.5) 2.88 (73.0
SF562CX SF562CX 20FX9966 1.00 (25.4) 2.13 (54.1)
SF562CX SF750CX 20F91266 1.38 (35.1) 2.50 (63.5)
SF562CX SF1000CX 20F91666 1.75 (44.5) 3.00 (76.2)
SF562CX SF1500CX 15FX92466 2.25 (57.1) 3.75 (85.6)
SF562CX F250C 20F9463 1.00 (25.4) 2.00 (50.8)
SF562CX F375C 20F9663 1.00 (25.4) 2.00 (50.8)
SF562CX F562C 20F9963 1.38 (35.1) 2.25 (57.2)
SF562CX F312C150C 20F9563 1.00 (25.4) 2.50 (63.5)
A
HEX
B
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Coupling Dimensions - National Pipe Thread (NPT)
Coupling Dimensions - High Pressure
Connection
“B”
Connection
“A”
Catalog
Number A Hex B
F250C F250C 60F4433 0.75 (19.1) 1.38 (35.1)
F250C F375C 60F4633 1.00 (25.4) 1.63 (41.4)
F250C F562C 60F4933 1.38 (35.1) 1.75 (44.5)
F250C F312C150 60F4533 1.00 (25.4) 2.00 (50.8)
F250C F1000C43 43F41633 1.75 (44.5) 2.75 (69.9)
F375C F375C 60F6633 1.00 (25.4) 1.75 (44.5)
F375C F562C 60F6933 1.38 (35.1) 2.00 (50.8)
F375C F312C150 60F6533 1.00 (25.4) 2.25 (57.2)
F375C F1000C43 43F61633 1.75 (44.5) 2.88 (73.0)
F562C F562C 60F9933 1.38 (35.1) 2.19 (55.6)
F562C40 F562C40 40F9933 1.38 (35.1) 2.19 (55.6)
F562C F312C150 60F9533 1.19 (30.1) 2.63 (66.7)
F562C SF1000C43 43F91633 1.75 (44.5) 3.75 (82.6)
F312C150 F312C150 150F5533 1.38 (35.1) 2.50 (63.5)
F1000C43 F1000C43 43F16 1.75 (44.5) 3.50 (88.9)
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
1/8 NPT W125 15F2281 0.63 (15.9) 1.38 (35.1)
1/8 NPT SW250 15F2482 0.63 (15.9) 1.50 (38.1)
1/8 NPT SW375 15F2682 0.75 (19.1) 1.63 (41.4)
1/8 NPT SW500 10F2882 1.00 (25.4) 1.50 (38.1)
1/8 NPT SF250CX 15F2486 0.63 (15.9) 1.38 (35.1)
1/8 NPT SF375CX 15F2686 0.75 (19.1) 1.50 (38.1)
1/8 NPT SF562CX 15F2986 1.00 (25.4) 1.63 (41.4)
1/8 NPT SF750CX 15F21286 1.38 (35.1) 1.75 (44.5)
1/8 NPT F250C 15F2483 0.75 (19.1) 1.38 (35.1)
1/8 NPT F375C 15F2683 1.00 (25.4) 1.63 (41.4)
1/8 NPT F562C 15F2983 1.38 (35.1) 1.82 (46.2)
1/8 NPT F312C150 15F2583 1.00 (25.4) 2.13 (54.1)
1/4 NPT W125 15F4281 0.75 (19.1) 1.50 (38.1)
1/4 NPT SW250 15F4482 0.75 (19.1) 1.63 (41.4)
1/4 NPT SW375 15F4682 0.75 (19.1) 1.75 (44.5)
1/4 NPT SW500 10F4882 1.00 (25.4) 2.00 (50.8)
1/4 NPT SF250CX 15F4486 0.75 (19.1) 1.63 (41.4)
1/4 NPT SF375CX 15F4686 0.75 (19.1) 1.75 (44.5)
1/4 NPT SF562CX 15F4986 1.00 (25.4) 2.00 (50.8)
1/4 NPT SF750CX 15F41286 1.38 (35.1) 1.75 (44.5)
1/4 NPT SF1000CX 15F41686 1.38 (35.1) 2.38 (60.33)
1/4 NPT SF1500CX 15F42486 2.25 (57.2) 3.25 (82.6)
1/4 NPT F250C 15F4483 0.75 (19.1) 1.63 (41.4)
1/4 NPT F375C 15F4683 1.00 (25.4) 1.88 (47.8)
1/4 NPT F562C 15F4983 1.38 (35.1) 2.00 (50.8)
1/4 NPT F312C150 15F4583 1.00 (25.4) 2.50 (63.5)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
representative.
A
HEX
B
A
HEX
B
Dimension inches (mm)
14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Coupling Dimensions - National Pipe Thread (NPT) - con’t
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
“B”
Connection
“A”
Catalog
Number
Dimension inches (mm)
A Hex B
3/8 NPT W125 15F6281 1.00 (25.4) 1.63 (41.1)
3/8 NPT SW250 15F6482 1.00 (25.4) 1.75 (44.5)
3/8 NPT SW375 15F6682 1.00 (25.4) 1.88 (47.8)
3/8 NPT SW500 10F6882 1.00 (25.4) 2.00 (50.8)
3/8 NPT SF250CX 15F6486 0.94 (23.9) 1.63 (41.4)
3/8 NPT SF375CX 15F6686 0.94 (23.9) 1.82 (46.2)
3/8 NPT SF562CX 15F6986 1.00 (25.4) 2.00 (50.8)
3/8 NPT SF750CX 15F61286 1.38 (35.1) 2.38 (60.33)
3/8 NPT SF1000CX 15F61686 1.75 (44.5) 2.50 (63.5)
3/8 NPT F250C 15F6483 1.00 (25.4) 1.63 (41.4)
3/8 NPT F375C 15F6683 1.00 (25.4) 1.88 (47.8)
3/8 NPT F562C 15F6983 1.38 (35.1) 2.00 (50.8)
3/8 NPT F312C150 15F6583 1.00 (25.4) 2.25 (57.2
1/2 NPT W125 15F8281 1.88 (47.8) 2.00 (50.8)
1/2 NPT SW250 15F8482 1.88 (47.8) 2.13 (54.1)
1/2 NPT SW375 15F8682 1.88 (47.8) 2.13 (54.1)
1/2 NPT SW500 10F8882 1.19 (30.1) 2.25 (57.2)
1/2 NPT SF250CX 15F8486 1.19 (30.1) 2.00 (50.8)
1/2 NPT SF375CX 15F8686 1.19 (30.1) 2.13 (54.1)
1/2 NPT SF562CX 15F8986 1.19 (30.1) 2.25 (57.2)
1/2 NPT SF750CX 15F81286 1.38 (35.1) 2.63 (66.7)
1/2 NPT SF1000CX 15F81686 1.75 (44.5) 3.00 (76.2)
1/2 NPT F250C 15F8483 1.19 (30.1) 2.00 (50.8)
1/2 NPT F375C 15F8683 1.19 (30.1) 2.13 (54.1)
1/2 NPT F562C 15F8983 1.38 (35.1) 2.50 (63.5)
1/2 NPT F312C150 15F8583 1.19 (30.1) 2.50 (63.5)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.
A
HEX
B
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
3/4 NPT SW500 10F12882 1.38 (35.1) 2.50 (63.5)
3/4 NPT SF375CX 10F12686 1.38 (35.1) 2.25 (57.2)
3/4 NPT SF562CX 10F12986 1.38 (35.1) 2.25 (57.2)
3/4 NPT SF750CX 10F121286 1.50 (38.1) 2.63 (66.7)
3/4 NPT SF1000CX 10F121686 1.75 (44.5) 3.00 (76.2)
3/4 NPT F250C 10F12483 1.38 (35.1) 2.38 (60.33)
3/4 NPT F562C 10F12983 1.38 (35.1) 2.38 (60.33)
1 NPT SF562CX 10F16986 1.75 (44.5) 2.63 (66.7)
1 NPT SF1000CX 10F161686 1.75 (44.5) 2.88 (73.0)
1 NPT F250C 10F16483 1.88 (47.8) 2.38 (60.33)
1 NPT F562C 10F16983 1.75 (44.5) 2.50 (63.5)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
Adapters/Couplings - Male/Male Adapters
Parker Autoclave Engineer’s standard male-to-male one piece
adapters are available in low, medium, and high pressure
configurations. Standard male-to-male adapters are machined
from cold worked stainless steel. Other materials are available upon request. Contact your local Sales Representative
for optional information. The following tables list our standard
adapters with dimensions.
Adapter End Configuration
‘L’ Low Pressure ‘H’ High Pressure ‘RH’ Reverse High
Pressure
(Type "M" Male Adapter)
‘M’ Medium Pressure
Ordering Procedure
Typical catalog number: 20 MA M6 H9
20
Pressure
(X 1000 psi)
MA
Male
Adapter
M6
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H9
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
Available End Connections
L2 - 1/8” Low Pressure
L4 - 1/4” Low Pressure
L6 - 3/8” Low Pressure
L8 - 1/2” Low Pressure
‘P’ National Pipe Tapered
H4 - 1/4” High Pressure
H5 - 5/16” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
*RH9 - 9/16” -18 Reverse High
RH12 - 3/4” -16 Reverse High
RH14 - 7/8” -14 Reverse High
RH16 - 1” -12 Reverse High
RH21 - 1-5/16” -12 Reverse High
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).
RH or "Reverse High Pressure" Connection is also know as "Type "M" Male Connection"
16 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Low-Pressure to Low-Pressure Adapters
Medium-Pressure to Medium-Pressure Adapters
20MAM4H4 SF250CX F250C 0.63 (15.9) 1.75 (44.5)
20MAM4H6 SF250CX F375C 0.81 (20.6) 2.13 (54.0)
20MAM4H9 SF250CX F562C 1.19 (30.1) 2.63 (66.7)
20MAM6H4 SF375CX F250C 0.63 (15.9) 1.94 (49.2)
20MAM6H6 SF375CX F375C 0.81 (20.6) 2.38 (60.3)
20MAM6H9 SF375CX F562C 1.19 (30.1) 2.69 (68.2)
20MAM9H4 SF562CX F250C 0.81 (20.6) 2.25 (57.1)
20MAM9H6 SF562CX F375C 0.81 (20.6) 2.56 (65.0)
20MAM9H9 SF562CX F562C 1.19 (30.1) 2.94 (74.6)
20MAM12H4 SF750CX F250C 1.19 (30.1) 2.63 (66.7)
20MAM12H6 SF750CX F375C 1.19 (30.1) 2.88 (73.0)
20MAM12H9 SF750CX F562C 1.19 (30.1) 3.00 (76.2)
20MAM16H4 SF1000CX F250C 1.38 (34.9) 3.25 (82.6)
20MAM16H6 SF1000CX F375C 1.38 (34.9) 3.50 (89.0)
20MAM16H9 SF1000CX F562C 1.38 (34.9) 3.69 (93.6)
Medium-Pressure to High-Pressure Adapters
A
B
B
A
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
B
A
15MAL2L2 W125 W125 0.50 (12.7) 1.38 (34.9)
15MAL2L4 W125 SW250 0.63 (15.9) 1.63 (41.3)
15MAL4L4 SW250 SW250 0.63 (15.9) 1.88 (47.6)
10MAL6L8 SW375 SW500 1.00 (25.4) 2.25 (57.1)
10MAL8L8 SW500 SW500 1.00 (25.4) 2.13 (54.0)
20MAM4M4 SF250CX SF250CX 0.50 (12.7) 1.69 (42.9)
20MAM4M6 SF250CX SF375CX 0.63 (15.9) 1.88 (47.6)
20MAM4M9 SF250CX SF562CX 0.94 (23.8) 2.38 (60.3)
20MAM4M12 SF250CX SF750CX 1.19 (30.1) 2.69 (68.2)
20MAM4M16 SF250CX SF1000CX 1.38 (34.9) 3.38 (85.7)
20MAM6M6 SF375CX SF375CX 0.63 (15.9) 2.25 (57.1)
20MAM6M9 SF375CX SF562CX 0.94 (23.8) 2.38 (60.3)
20MAM6M12 SF375CX SF750CX 1.19 (30.1) 2.81 (71.4)
20MAM6M16 SF375CX SF1000CX 1.38 (34.9) 3.38 (85.7)
20MAM9M9 SF562CX SF562CX 0.94 (23.8) 2.50 (63.5)
20MAM9M12 SF562CX SF750CX 1.19 (30.1) 3.00 (76.2)
20MAM9M16 SF562CX SF1000CX 1.38 (34.9) 3.69 (93.72)
20MAM12M12 SF750CX SF750CX 1.19 (30.1) 3.13 (79.3)
20MAM12M16 SF750CX SF1000CX 1.38 (34.9) 3.81 (96.8)
20MAM16M16 SF1000CX SF1000CX 1.38 (34.9) 4.38 (111.1)
Connection
L/P
Catalog
Number
Connection
L/P
Dimension inches (mm)
A Hex B
Low-Pressure to Medium-Pressure Adapters
15MAL4M4 SW250 SF250CX 0.63 (15.9) 1.86 (47.3)
10MAL8M9 SW500 SF562CX 1.00 (25.4) 2.44 (62.0)
Connection
L/P
Catalog
Number
Dimension inches (mm)
A Hex B
Catalog
Number
Dimension inches (mm)
A Hex B
Catalog
Number
Dimension inches (mm)
A Hex B
Low-Pressure to High-Pressure Adapters
15MAL2H4 W125 F250C 0.63 (15.9) 1.63 (41.3)
15MAL2H6 W125 F375C 0.90 (25.4) 2.00 (50.8)
Connection
L/P
Catalog
Number
Dimension inches (mm)
A Hex B
B
A
Connection
M/P
Connection
H/P
Connection
M/P
Connection
M/P
Connection
M/P
Connection
H/P
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 17
A
B
Dimension inches (mm)
B
High-Pressure to High-Pressure Adapters
Connection
NPT
Dimension inches (mm)
A Hex B
Medium-Pressure to NPT Adapters
Connection
L/P
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
Low-Pressure to NPT Adapters
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
40MAH9H9 F562C40 F562C40 1.19 (30.1) 2.94 (74.6)
60MAH4H4 F250C F250C 0.63 (15.9) 1.69 (42.8)
60MAH4H5 F250C F312C150 0.75 (19.1) 2.63 (66.7)
60MAH4H6 F250C F375C 0.81 (20.6) 2.13 (54.0)
60MAH4H9 F250C F562C 1.19 (30.1) 2.56 (65.0)
60MAH5H6 F312C150 F375C 0.81 (20.6) 2.81 (71.4)
60MAH6H6 F375C F375C 0.81 (20.6) 2.25 (57.1)
60MAH6H9 F375C F562C 1.19 (30.1) 2.88 (73.0)
60MAH9H9 F562C F562C 1.19 (30.1) 3.00 (76.2)
150MAH5H5 F312C150 F312C150 0.75 (19.1) 3.38 (85.7)
Catalog
Number
Connection
H/P A Hex
Connection
M/P
Catalog
Number
15MAM4P4 SF250CX 1/4” 0.63 (15.9) 1.75 (44.5)
15MAM4P6 SF250CX 3/8” 0.75 (19.1) 1.81 (46.2)
15MAM4P8 SF250CX 1/2” 0.94 (23.8) 2.19 (55.5)
15MAM6P4 SF375CX 1/4” 0.63 (15.9) 1.94 (49.1)
15MAM6P6 SF375CX 3/8” 0.75 (19.1) 2.00 (50.8)
15MAM6P8 SF375CX 1/2” 0.94 (23.8) 2.38 (60.3)
15MAM9P4 SF562CX 1/4” 0.81 (20.6) 2.25 (57.1)
15MAM9P6 SF562CX 3/8” 0.81 (20.6) 2.13 (54.0)
15MAM9P8 SF562CX 1/2” 0.94 (23.8) 2.56 (65.0)
10MAM9P12 SF562CX 3/4” 1.19 (30.1) 2.75 (69.9)
10MAM9P16 SF562CX 1” 1.38 (34.9) 3.00 (76.2)
15MAM12P4 SF750CX 1/4” 1.19 (30.1) 2.63 (66.7)
15MAM12P6 SF750CX 3/8” 1.19 (30.1) 2.63 (66.7)
15MAM12P8 SF750CX 1/2” 1.19 (30.1) 2.81 (71.4)
10MAM12P12 SF750CX 3/4” 1.19 (30.1) 2.81 (71.4)
10MAM12P16 SF750CX 1” 1.19 (30.1) 2.81 (71.4)
15MAM16P4 SF1000CX 1/4” 1.38 (34.9) 3.38 (85.7)
15MAM16P6 SF1000CX 3/8” 1.38 (34.9) 3.31 (84.1)
15MAM16P8 SF1000CX 1/2” 1.38 (34.9) 3.44 (87.3)
10MAM16P12 SF1000CX 3/4” 1.50 (38.1) 3.75 (95.3)
10MAM16P16 SF1000CX 1” 1.50 (38.1) 4.00 (101.6)
15MAL2P2 W125 1/8” 0.50 (12.7) 1.38 (34.9)
15MAL2P4 W125 1/4” 0.63 (15.9) 1.63 (41.2)
15MAL2P8 W125 1/2” 1.00 (25.4) 2.13 (54.0)
15MAL4P8 SW250 1/2” 1.00 (25.4) 2.25 (57.1)
15MAL4P2 SW250 1/8” 0.63 (15.9) 1.63 (41.2)
15MAL4P4 SW250 1/4” 0.63 (15.9) 1.75 (44.5)
15MAL6P4 SW375 1/4” 0.75 (19.1) 1.88 (47.6)
15MAL6P8 SW375 1/2” 1.00 (25.4) 2.25 (57.1)
10MAL8P6 SW500 3/8” 1.00 (25.4) 2.00 (50.0)
10MAL8P8 SW500 1/2” 1.00 (25.4) 2.31 (58.7)
10MAL8P12 SW500 3/4” 1.19 (30.1) 2.38 (60.3)
Connection
H/P
18 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
A
B
Connection
H/P
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
High-Pressure to NPT Adapters
Connection
M/P
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
Medium-Pressure to Reverse High-Pressure (Type "M" Male) Adapters
Connection
NPT
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
NPT to NPT Adapters
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
15MAH4P4 F250C 1/4” 0.63 (15.9) 1.81 (46.2)
15MAH4P6 F250C 3/8” 0.75 (19.1) 1.88 (47.6)
15MAH4P8 F250C 1/2” 0.94 (23.8) 2.25 (57.1)
15MAH6P4 F375C 1/4” 0.81 (20.6) 2.13 (54.0)
15MAH6P6 F375C 3/8” 0.81 (20.6) 2.13 (54.0)
15MAH6P8 F375C 1/2” 0.94 (23.8) 2.50 (63.5)
15MAH9P4 F562C 1/4” 1.19 (30.1) 2.63 (66.7)
15MAH9P6 F562C 3/8” 1.19 (30.1) 2.56 (65.0)
15MAH9P8 F562C 1/2” 1.19 (30.1) 2.75 (69.9)
15MAP4P4 1/4 1/4” 0.63 (15.9) 1.81 (46.2)
15MAP4P6 1/4 3/8” 0.75 (19.1) 1.88 (47.6)
15MAP4P8 1/4 1/2” 0.94 (23.8) 2.31 (58.7)
15MAP6P6 3/8 3/8” 0.75 (19.1) 1.88 (47.6)
15MAP6P8 3/8 1/2” 0.94 (23.8) 2.31 (58.7)
15MAP8P8 1/2 1/2” 0.94 (23.8) 2.50 (63.5)
20MAM4RH9 SF250CX 9/16” 0.63 (15.9) 1.56 (39.7)
20MAM4RH12 SF250CX 3/4” 0.81 (20.6) 1.88 (47.6)
20MAM4RH16 SF250CX 1” 1.00 (25.4) 2.13 (54.0)
20MAM6RH9 SF375CX 9/16” 0.63 (15.9) 1.69 (42.8)
20MAM6RH12 SF375CX 3/4” 0.81 (20.6) 1.81 (46.2)
20MAM6RH16 SF375CX 1” 1.00 (25.4) 2.25 (57.1)
20MAM9RH9 SF562CX 9/16” 0.94 (23.8) 2.00 (50.8)
20MAM9RH12 SF562CX 3/4” 0.94 (23.8) 2.13 (54.0)
20MAM9RH14 SF562CX 7/8” 0.94 (23.8) 2.44 (61.9)
20MAM9RH16 SF562CX 1” 1.00 (25.4) 2.25 (57.1)
20MAM9RH21 SF562CX 1-5/16” 1.38 (34.9) 2.38 (60.3)
20MAM12RH9 SF750CX 9/16” 1.19 (30.1) 2.38 (60.3)
20MAM12RH12 SF750CX 3/4” 1.19 (30.1) 2.44 (61.9)
20MAM12RH16 SF750CX 1” 1.19 (30.1) 2.50 (63.5)
20MAM12RH21 SF750CX 1-5/16” 1.50 (38.1) 2.75 (69.9)
20MAM16RH9 SF1000CX 9/16” 1.38 (34.9) 3.13 (79.3)
20MAM16RH12 SF1000CX 3/4” 1.38 (34.9) 3.19 (80.9)
20MAM16RH14 SF1000CX 7/8” 1.38 (34.9) 3.34 (84.9)
20MAM16RH16 SF1000CX 1” 1.38 (34.9) 3.38 (85.7)
20MAM16RH21 SF1000CX 1-5/16” 1.50 (38.1) 3.25 (82.6)
15MAM24RH12 SF1500CX 3/4” 1.88 (47.8) 3.88 (98.6)
15MAM24RH16 SF1500CX 1” 1.88 (47.8) 3.88 (98.6)
15MAM24RH21 SF1500CX 1-5/16” 1.88 (47.8) 3.88 (98.6)
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 19
Connection
H/P
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
26MAH4RH16 F250C 1” 1.00 (25.4) 2.13 (54.0)
26MAH6RH16 F375C 1” 1.00 (25.4) 2.25 (57.1)
26MAH9RH16 F562C 1” 1.19 (30.1) 2.69 (68.2)
30MAH4RH12 F250C 3/4” 0.81 (20.6) 1.88 (47.6)
30MAH6RH12 F375C 3/4” 0.81 (20.6) 2.06 (54.0)
30MAH9RH12 F562C 3/4” 1.19 (30.1) 2.50 (63.5)
40MAH4RH9 F250C 9/16” 0.63 (15.9) 1.56 (39.7)
40MAH6RH9 F375C 9/16” 0.81 (20.6) 1.94 (49.1)
40MAH9RH9 F562C 9/16” 1.19 (30.1) 2.38 (60.3)
High-Pressure to Reverse High-Pressure (Type "M" Male) Adapters
Connection
NPT
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
NPT to Reverse High-Pressure (Type "M" Male) Adapters
Connection
RH
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
Reverse High-Pressure to Reverse High-Pressure (Type "M" Male to Type "M" Male) Adapters
B
A
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
15MAP4RH9 1/4 9/16” 0.63 (15.9) 1.63 (41.2)
15MAP4RH12 1/4 3/4” 0.81 (20.6) 1.88 (47.6)
15MAP4RH16 1/4 1” 1.00 (25.4) 2.25 (57.1)
15MAP6RH9 3/8 9/16” 0.75 (19.1) 1.81 (46.2)
15MAP6RH12 3/8 3/4” 0.81 (20.6) 1.94 (49.1)
15MAP6RH16 3/8 1” 1.00 (25.4) 2.13 (54.0)
15MAP8RH9 1/2 9/16” 0.94 (23.8) 2.00 (50.8)
15MAP8RH12 1/2 3/4” 0.94 (23.8) 2.13 (54.0)
15MAP8RH14 1/2 7/8” 1.00 (25.4) 2.25 (57.1)
15MAP8RH16 1/2 1” 1.00 (25.4) 2.31 (58.7)
10MAP12RH12 3/4 3/4” 1.19 (30.1) 2.31 (58.7)
10MAP12RH16 3/4 1” 1.38 (34.9) 2.63 (66.7)
10MAP12RH21 3/4 1-5/16” 1.38 (34.9) 2.63 (66.7)
10MAP16RH9 1 9/16” 1.38 (34.9) 2.25 (57.2)
10MAP16RH16 1 1” 1.38 (34.9) 2.81 (71.4)
10MAP16RH21 1 1-5/16” 1.38 (34.9) 2.68 (68.0)
20MARH21RH21 1-5/16 1-5/16” 1.38 (34.9) 2.13 (54.1)
26MARH9RH16 9/16 1” 1.00 (25.4) 1.88 (47.6)
26MARH12RH16 3/4 1” 1.00 (25.4) 2.00 (50.8)
26MARH16RH16 1 1” 1.00 (25.4) 2.00 (50.8)
30MARH9RH12 9/16 3/4” 0.81 (20.6) 1.63 (41.2)
30MARH12RH12 3/4 3/4” 0.81 (20.6) 1.75 (44.5)
40MARH9RH9 9/16 9/16” 0.63 (15.9) 1.50 (38.1)
20 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
QSS Male/Female Adapters
Male /female adapters are designed to adapt a female connection to another size and/or type of connection without the need
for additional couplings. In selecting an adapter involving two
different sized connections, the larger connection should be
on the male end where it is possible to maximize the mechanical strength of the adapter.
To use this chart:
1. Locate MALE end in vertical column.
2. Locate desired FEMALE end of adapter across top of chart.
3. Catalog number of required adapter is located at
intersection of columns.
4. For one piece adapter add-OP to suffix of part number.
Connection
Size and Type
Quick Set
Quick Set Medium Pressure
Note:
All Parker Autoclave Engineers adapters are supplied complete with appropriate gland nuts and sleeves
unless specified without.
Materials
All Parker Autoclave Engineers adapters are precision machined from cold-worked Type 316 stainless steel.
Medium Pressure
High Pressure National Pipe Thread (NPT)
* The maximum pressure rating for an adapter is determined by the connection component with the
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
LOWER.
CAUTION: See appropriate pressure section in reference to proper selection of tubing.
FEMALE END
MALE END
NOTE: NPT (Pipe) connections
• NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
• Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
• Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE
tape, consider using thread lubrication to prevent galling of mating parts.
1/4” 3/8” 9/16” 3/4” 1/4” 3/8” 9/16” 3/4” 1” QS250 QS375 QS562 QS750 SF250CX SF375CX SF562CX SF750CX SF1000CX
Fits this Pressure 15,000 15,000 15,000 15,000 20,000 20,000 20,000 20,000 20,000
Female Rating (1034.20) (1034.20) (1034.20) (1034.20) (1378.93) (1378.93) (1378.93) (1378.93) (1378.93)
Connection PSI (bar)*
1/4” QS250 15M46QQ 15M49QQ 15M412QQ 15M44Q6 15M46Q6 15M49Q6 15M412Q6 15M416Q6
3/8” QS375 15M64QQ 15M69QQ 15M612QQ 15M64Q6 15M66Q6 15M69Q6 15M612Q6 15M616Q6
9/16” QS562 15M94QQ 15M94QQ 15M912QQ 15M94Q6 15M96Q6 15M99Q6 15M912Q6 15M916Q6
3/4” QS750 15M124QQ 15M126QQ 15M129QQ 15M124Q6 15M126Q6 15M129Q6 15M1212Q6 15M1216Q6
1/4” SF250CX 15M44KQ 15M46KQ 15M49KQ 15M412KQ
3/8” SF375CX 15M64KQ 15M66KQ 15M69KQ 15M612KQ
9/16” SF562CX 15M94KQ 15M96KQ 15M99KQ 15M912KQ
3/4” SF750CX 15M124KQ 15M126KQ 15M129KQ 15M1212KQ
1” SF1000CX 15M164KQ 15M166KQ 15M169KQ 15M1612KQ
1/4” F250C 15M44BQ 15M46BQ 15M49BQ 15M412BQ
3/8” F375C 15M64BQ 15M66BQ 15M69BQ 15M612BQ
9/16” F562C 15M94BQ 15M96BQ 15M99BQ 15M912BQ
1/4” NPT 15M44NQ 15M46NQ 15M49NQ 15M412NQ
3/8” NPT 15M64NQ 15M66NQ 15M69NQ 15M612NQ
1/2” NPT 15M84NQ 15M86NQ 15M89NQ 15M812NQ
3/4” NPT 10M124NQ 10M126NQ 10M129NQ 10M1212NQ
1” NPT 10M164NQ 10M166NQ 10M169NQ 10M1612NQ
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
60,000
(4136.85)
60,000
(4136.85)
60,000
(4136.85)
15,000
(1034.20)
15,000
(1034.20)
15,000
(689.45)
10,000
(689.45)
10,000
(689.45)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 21
High Pressure
1/4” 3/8” 9/16” 1/4” 3/8” 1/2” 3/4” 1” F250C F375C F562C NPT NPT NPT NPT NPT
60,000 60,000 150,000 15,000 15,000 15,000 10,000 10,000
(4136.85) (4136.85) (10342.14) (1034.20) (1034.20) (1034.20) (689.45) (689.45)
15M44Q3 15M46Q3 15M49Q3 15M44Q8 15M46Q8 15M48Q8 10M412Q8 10M416Q8
15M64Q3 15M66Q3 15M69Q3 15M64Q8 15M66Q8 15M68Q8 10M612Q8 10M616Q8
15M94Q3 15M96Q3 15M99Q3 15M94Q8 15M96Q8 15M98Q8 10M912Q8 10M916Q8
15M124Q3 15M126Q3 15M129Q3 15M124Q8 15M126Q8 15M128Q8 10M1212Q8 10M1216Q8
National Pipe Thread (NPT)
AE Male/Female Adapters are available in a “one-piece” design. They are identical to the two piece designs in
length and can be ordered by adding the suffix - OP to the two piece adapter part numbers listed.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.factory.
FEMALE END
Quick Set Female
to
Quick Set Male
Quick Set Female
to
Medium Pressure Male
Quick Set Female
to
High Pressure Male
Quick Set Female
to
National Pipe Male
22 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Catalog
Number
Dimension inches (mm)
A Hex B
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory. Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Male End
Fits this
Connection
A
HEX
B
A
HEX
B
QSS to Pipe QSS to QSS
QS250 QS250
QS250 QS375 15M46QQ
QS250 QS562 15M49QQ 1.38 (34.9) 2.25 (57.1)
QS250 QS750 15M412QQ
QS250 SF250CX 15M44Q6
QS250 SF375CX 15M46Q6
QS250 SF562CX 15M49Q6
QS250 SF750CX 15M412Q6
QS250 SF1000CX 15M416Q6
QS250 F250C 15M44Q3
QS250 F375C 15M46Q3
QS250 F562C 10M49Q3
QS250 1/4 NPT 15M44Q8 0.75 (19.1) 1.69 (42.9)
QS250 3/8 NPT 15M46Q8
QS250 1/2 NPT 15M48Q8
QS250 3/4 NPT 10M412Q8
QS250 1 NPT 10M416Q8
QS375 QS250 15M64QQ 0.75 (19.1) 1.53 (38.9)
QS375 QS375
QS375 QS562 15M69QQ
QS375 QS750 15M612QQ 1.50 (38.1) 2.78 (70.6)
QS375 SF250CX 15M64Q6
QS375 SF375CX 15M66Q6 0.75 (19.1) 1.66 (42.2)
QS375 SF562CX 15M69Q6 1.00 (25.4) 1.78 (45.2)
QS375 SF750CX 15M612Q6
QS375 SF1000CX 15M616Q6
QS375 F250C 15M64Q3
QS375 F375C 15M66Q3
QS375 F562C 15M69Q3
QS375 1/4 NPT 15M64Q8 0.75 (19.1) 1.66 (42.2)
QS375 3/8 NPT 15M66Q8 1.00 (25.4) 1.78 (45.3)
QS375 1/2 NPT 15M68Q8 1.19 (30.1) 2.16 (54.8)
QS375 3/4 NPT 10M612Q8
QS375 1 NPT 10M616Q8
QS562 QS250 15M94QQ 1.00 (25.4) 1.85 (46.8)
QS562 QS375 15M96QQ 1.00 (25.4) 1.85 (46.8)
QS562 QS562
QS562 QS750 15M912QQ 1.50 (38.1) 3.16 (80.3)
QS562 SF250CX 15M94Q6
QS562 SF375CX 15M96Q6
QS562 SF562CX 15M99Q6
QS562 SF750CX 15M912Q6
QS562 SF1000CX 15M916Q6
QS562 F250C 15M94Q3
QS562 F375C 15M96Q3
QS562 F562C 15M99Q3
QS562 1/4 NPT 15M94Q8 1.19 (30.1) 2.22 (56.4)
QS562 3/8 NPT 15M96Q8 1.19 (30.1) 2.22 (56.4)
QS562 1/2 NPT 15M98Q8 1.19 (30.1) 2.41 (61.1)
QS562 3/4 NPT 10M912Q8 1.38 (35.1) 2.56 (65.0)
QS562 1 NPT 10M916Q8
QS750 QS250 15M124QQ
QS750 QS375 15M126QQ 1.50 (38.1) 2.53 (64.1)
QS750 QS562 15M129QQ 1.50 (38.1) 2.53 (64.1)
QS750 QS750
QS750 SF250CX 15M124Q6
QS750 SF375CX 15M126Q6
QS750 SF562CX 15M129Q6
QS750 SF750CX 15M1212Q6
QS750 SF1000CX 15M1216Q6
QS750 F250C 15M124Q3
QS750 F375C 15M126Q3
QS750 F562C 15M129Q3
QS750 1/4 NPT 15M124Q8 0.75 (19.1) 1.66 (42.2)
QS750 3/8 NPT 15M126Q8 1.00 (25.4) 1.78 (45.3)
QS750 1/2 NPT 15M128Q8 1.50 (38.1) 2.78 (70.5)
QS750 3/4 NPT 10M1212Q8
QS750 1 NPT 10M1216Q8
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 23
SF562CX QS250 15M94KQ 0.94 (23.8) 1.75 (44.5)
SF562CX QS375 15M96KQ 0.94 (23.8) 1.75 (44.5)
SF562CX QS562 15M99KQ 1.38 (34.9) 2.50 (63.5)
SF562CX QS750 15M912KQ 1.50 (38.1) 3.25 (82.6)
SF750CX QS250 15M124KQ
SF750CX QS375 15M126KQ
SF750CX QS562 15M129KQ 1.38 (34.9) 2.50 (63.5)
SF750CX QS750 15M1212KQ 1.50 (38.1) 3.06 (77.7)
SF1000CX QS250 15M164KQ
SF1000CX QS375 15M166KQ
SF1000CX QS562 15M169KQ 1.50 (38.1) 2.88 (73.0)
SF1000CX QS750 15M1612KQ 1.50 (38.1) 3.38 (85.7)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
FFor prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
F375C QS250 15M64BQ
F375C QS375 15M66BQ 0.81 (20.6) 1.69 (42.9)
F375C QS562 15M69BQ
F375C QS750 15M612BQ
F562C QS250 15M94BQ 1.19 (30.1) 1.81(46.1)
F562C QS375 15M96BQ 1.19 (30.1) 1.69 (42.9)
F562C QS562 15M99BQ 1.38 (34.9) 2.32 (58.8)
F562C QS750 15M912BQ 1.50 (38.1) 3.06 (77.7)
SF250CX QS250 15M44KQ 0.75 (19.1) 1.68 (42.7)
SF250CX QS375 15M46KQ 0.81 (20.6) 1.68 (42.7)
SF250CX QS562 15M49KQ 1.19 (30.1) 2.22 (56.4)
SF250CX QS750 15M412KQ
SF375CX QS250 15M64KQ 0.75 (19.1) 1.63 (41.4)
SF375CX QS375 15M66KQ 0.81 (20.6) 1.81 (46.1)
SF375CX QS562 15M69KQ
SF375CX QS750 15M612KQ 1.50 (38.1) 3.00 (76.20)
F250C QS250 15M44BQ 0.75 (19.1) 1.31 (33.3)
F250C QS375 15M46BQ 0.81 (20.6) 1.56 (39.7)
F250C QS562 15M49BQ
F250C QS750 15M412BQ
B
A
HEX
MP to QSS HP to QSS
B
A
HEX
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Catalog
Number
Dimension inches (mm)
A Hex B
Male End
Fits this
Connection
24 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
3/4 NPT QS250 10M124NQ
3/4 NPT QS375 10M126NQ
3/4 NPT QS562 10M129NQ 1.38 (35.1) 2.38 (60.3)
3/4 NPT QS750 10M1212NQ 1.50 (38.1) 2.81 (71.4)
1 NPT QS250 10M164NQ
1 NPT QS275 10M166NQ
1 NPT QS562 10M169NQ 1.50 (38.1) 2.38 (60.3)
1 NPT QS750 10M1612NQ 1.50 (38.1) 2.38 (60.3)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
B
A
HEX
NPT to QSS
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
1/4 NPT QS250 15M44NQ 0.75 (19.1) 1.44 (36.5)
1/4 NPT QS375 15M46NQ 0.81 (20.6) 1.63 (41.3)
1/4 NPT QS562 15M49NQ
1/4 NPT QS750 15M412NQ
3/8 NPT QS250 15M64NQ 0.75 (19.1) 1.50 (38.1)
3/8 NPT QS375 15M66NQ 0.81 (20.6) 1.63 (41.3)
3/8 NPT QS562 15M69NQ 1.38 (35.1) 2.13 (53.5)
3/8 NPT QS750 15M612NQ
1/2 NPT QS250 15M84NQ 0.94 (23.8) 1.75 (44.5)
1/2 NPT QS375 15M86NQ 0.94 (23.8) 1.63 (41.3)
1/2 NPT QS562 15M89NQ 1.38 (35.1) 2.25 (57.2)
1/2 NPT QS750 15M812NQ 1.50 (38.1) 2.81 (71.4)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 25
QSS Male/Male Adapters
Parker Autoclave Engineer’s standard male-to-male one piece adapters are
available in multiple configurations. Standard male-to-male adapters are
machined from cold worked stainless steel.Contact your local Sales
Representative for optional information. The following tables list our
standard adapters with dimensions.
Adapter End Configuration
QS Series ‘H’ High Pressure ‘RH’ Reverse High
Pressure
(Type "M" Male Adapter)
‘M’ Medium Pressure
Ordering Procedure
Typical catalog number: 15 MA Q4 H9
15
Pressure
(X 1000 psi)
MA
Male
Adapter
Q4
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H9
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
Available End Connections
Q4 - 1/4” QS Series
Q6 - 3/8” QS Series
Q9 - 9/16” QS Series
Q12 - 3/4” QS Series
‘P’ National Pipe Tapered
H4 - 1/4” High Pressure
H5 - 5/16” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
*RH9 - 9/16” -18 Reverse High
RH12 - 3/4” -16 Reverse High
RH14 - 7/8” -14 Reverse High
RH16 - 1” -12 Reverse High
RH21 - 1-5/16” -12 Reverse High
*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).
RH or "Reverse High Pressure" Connection is also know as "Type "M" Male Connection"
26 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
QS Series to Reverse High-Pressure (Type "M" Male) Adapters
Connection
QS
15MAQ4RH9 QS250 9/16” 0.63 (15.9) 1.70 (43.2)
15MAQ6RH9 QS375 9/16” 0.75 (19.1) 1.81 (46.2)
15MAQ9RH9 QS562 9/16” 1.19 (30.1) 2.25 (57.1)
15MAQ9RH12 QS562 3/4” 1.19 (30.1) 2.38 (60.3)
15MAQ9RH16 QS562 1” 1.19 (30.1) 2.56 (65.1)
15MAQ12RH9 QS750 9/16” 1.38 (35.1) 3.00 (76.2)
15MAQ16RH9 QS1000 9/16” 1.75 (44.45) 3.25 (82.55)
A
B
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ9H4 QS562 1/4” 0.75 (19.1) 2.00 (50.8)
A
B
QS Series to High-Pressure Adapter
Connection
H/P
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ6P4 QS375 1/4” 1.19 (30.1) 2.44 (62.0)
15MAQ6P8 QS375 1/2” .94 (23.9) 2.19 (55.6)
15MAQ9P4 QS562 1/4” 1.00 (25.4) 2.44 (62.0)
QS Series to NPT Adapter
Connection
NPT
A
B
A
B
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ6J4 QS375 1/4” 0.75 (19.1) 1.75 (44.5)
QS Series to JIC Adapter
Connection
NPT
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 27
Adapters/Couplings - Male/Male JIC Adapters
Parker Autoclave Engineer’s male-to-male JIC one-piece adapters
are available in low, medium, and high pressure configurations.
JIC adapters are machined from cold worked stainless steel. Other
materials are available upon request. Contact your local Sales
Representative for optional information. The following tables list our
standard adapters with dimensions.
Adapter End Configuration
JIC connections consist of a 37° angle.
Ordering Procedure
Typical catalog number: 20 MA M4 J4
20
Pressure
(X 1000 psi)
MA M4 J4
Available End Connections
L4 - 1/4” Low Pressure
L6 - 3/8” Low Pressure
L8 - 1/2” Low Pressure
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H4 - 1/4” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
Male
Adapter
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
*J4 - 1/4” JIC
J6 - 3/8” JIC
J8 - 1/2” JIC
J10 - 5/8” JIC
J12 - 3/4” JIC
J16 - 1” JIC
*J4, J6, J8 & J10 - 20,000 psi (1380 bar), J12 & J16 - 15,000 psi (1034 bar)
Thread Sizes
J4 - 7/16-20
J6 - 9/16-18
J8 - 3/4-16
J10 - 7/8-14
J12 - 1-1/16-12
J16 - 1-5/16-12
28 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Connection
L/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
Low-Pressure to JIC Adapters
Connection
M/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
Medium-Pressure to JIC Adapters
Connection
H/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
High-Pressure to JIC Adapters
A
B
B
A
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
20MAH4J2 F250C 1/8” 0.63 (15.9) 1.50 (38.1)
20MAH4J4 F250C 1/4” 0.75 (19.1) 1.63 (41.3)
20MAH4J6 F250C 3/8” 0.81 (20.6) 1.63 (41.3)
20MAH4J8 F250C 1/2” 1.00 (25.4) 1.88 (47.6)
20MAH6J4 F375C 1/4” 0.81 (20.6) 1.94 (49.1)
20MAH6J6 F375C 3/8” 0.81 (20.6) 1.94 (49.1)
20MAH6J8 F375C 1/2” 1.00 (25.4) 2.19 (55.5)
20MAH9J4 F562C 1/4” 1.19 (30.1) 2.31 (58.7)
20MAH9J6 F562C 3/8” 1.19 (30.1) 2.31 (58.7)
20MAH9J8 F562C 1/2” 1.19 (30.1) 2.38 (60.3)
20MAH4J10 F250C 5/8” 1.19 (30.1) 2.13 (54.0)
15MAL4J4 SW250 1/4” 0.75 (19.1) 1.88 (47.6)
15MAL6J4 SW375 1/4” 0.75 (19.1) 2.00 (50.8)
15MAL6J6 SW375 3/8” 0.81 (20.6) 2.00 (50.8)
15MAM4J12 SF250CX 3/4” 1.38 (34.9) 2.25 (57.1)
15MAM4J16 SF250CX 1” 1.50 (38.1) 2.38 (60.3)
15MAM6J12 SF375CX 3/4” 1.38 (34.9) 2.44 (61.3)
15MAM6J16 SF375CX 1” 1.50 (38.1) 2.53 (64.9)
15MAM9J12 SF562CX 3/4” 1.38 (34.9) 2.69 (68.2)
15MAM9J16 SF562CX 1” 1.50 (38.1) 2.78 (70.6)
15MAM12J12 SF750CX 3/4” 1.38 (34.9) 2.88 (73.0)
15MAM12J16 SF750CX 1” 1.50 (38.1) 2.88 (73.0)
15MAM16J12 SF1000CX 3/4” 1.38 (34.9) 3.38 (85.7)
15MAM16J16 SF1000CX 1” 1.50 (38.1) 3.50 (89.0)
20MAM4J4 SF250CX 1/4” 0.75 (19.1) 1.63 (41.3)
20MAM4J6 SF250CX 3/8” 0.81 (20.6) 1.75 (44.5)
20MAM4J8 SF250CX 1/2” 1.00 (25.4) 2.00 (50.8)
20MAM6J4 SF375CX 1/4” 0.75 (19.1) 1.75 (44.5)
20MAM6J6 SF375CX 3/8” 0.81 (20.6) 1.81 (46.0)
20MAM6J8 SF375CX 1/2” 1.00 (25.4) 2.00 (50.8)
20MAM9J4 SF562CX 1/4” 0.94 (23.8) 2.13 (54.0)
20MAM9J6 SF562CX 3/8” 0.94 (23.8) 2.13 (54.0)
20MAM9J8 SF562CX 1/2” 1.00 (25.4) 2.25 (57.1)
20MAM9J10 SF562CX 5/8” 1.19 (30.1) 2.25 (57.1)
20MAM12J4 SF750CX 1/4” 1.19 (30.1) 2.38 (60.3)
20MAM12J6 SF750CX 3/8” 1.19 (30.1) 2.38 (60.3)
20MAM12J8 SF750CX 1/2” 1.19 (30.1) 2.50 (63.5)
20MAM16J4 SF1000CX 1/4” 1.38 (34.9) 3.13 (79.3)
20MAM16J6 SF1000CX 3/8” 1.38 (34.9) 3.13 (79.3)
20MAM16J8 SF1000CX 1/2” 1.38 (34.9) 3.13 (79.3)
15MAM24J16* 1.88 1" 1.88 (47.75) 4.25 (107.9)
*Note: O.D. is 2.13 (54.10) supplied with flats.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 29
Connection
JIC
Catalog
Number
Connection
JIC A Hex B
JIC to JIC Adapters
Connection
NPT
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
NPT to JIC Adapters
Autoclave Engineers高压接头-中国总代理的详细描述：Autoclave Engineers Adapters
Autoclave高压接头规格参数 工作压力：1034.3 MPa 工作温度范围：-423℉(-252℃) 到1200℉(649℃) 连接尺寸：1/16”到1” 材质：316SS
Autoclave Engineers公司是以生产的高压阀、接头和管子而***。压力可以从0到150,000 psi(10342 bar)，温度从-423°F(-252°C)到1200°F(649°C)。没有别的工厂能比Autoclave Engineers在高压要求方面做的更好，也没有别的工厂能比Autoclave Engineers做的系统***、更具有***特性。
Autoclave Engineers高压阀门：高压针阀、高压球阀、安全阀、仪表阀、***的阀和阀组、接头、管子、压力表、热电偶、气动执行器。Autoclave Engineers应用领域: 海上油井, 石油化工及航天领域。
Autoclave Engineers高压接头型号
Male/Female Adapters
15M92R1 6M94R2 6M96R2 4M98R2 15M94R6 15M96R615M99R6 15M94R3 15M96R3 15M99R3 10M92R8 10M94R8 10M96R8 10M98R815M72E1 6M74E2 6M76E2 4M78E2 15M74E6 15M76E6 15M79E6 15M74E315M76E3 15M79E3 10M72E8 10M74E8 10M76E8 10M78E8 15M92E1 6M94E26M96E2 4M98E2 15M94E6 15M96E6 15M99E6 15M912E6 15M94E3 15M96E310M92E8 10M94E8 10M96E8 10M98E8 10M912E8 10M916E8 15M122E1 6M124E26M126E2 4M128E2 15M124E6 15M126E6 15M129E6 15M1212E6 15M1216E615M124E3 15M126E3 15M129E3 10M122E8 10M124E8 10M126E8 10M128E810M1212E8 10M1216E8 43M164B3 43M166B3 43M169B3 43M169B40 15M42B16M44B2 6M46B2 4M48B2 20M44B6 20M46B6 20M49B6 20M412B6 43M416B360M45B3 60M46B3 60M49B3 15M42B8 15M44B8 15M46B8 15M48B8 10M412B86M54B2 6M56B2 4M58B2 20M54B6 20M56B6 20M59B6 20M512B6 60M54B360M56B3 60M59B3 15M58B8 10M512B8 15M62B1 6M64B2 6M66B2 4M68B220M64B6 20M66B6 20M69B6 20M612B6 20M616B6 43M616B6 60M64B3 60M65B360M69B3 15M62B8 15M64B8 15M66B8 15M68B8 10M612B8 10M616B8 15M92B16M94B2 6M96B2 4M98B2 20M94B6 20M96B6 20M99B6 20M912B6 20M916B643M916B3 60M94B3 60M95B3 60M96B3 15M92B8 15M94B8 15M96B8 15M98B810M912B8 10M916B8 20M912G6 15M98G8 15M22N1 15M24N2 15M26N2 10M28N215M24N6 15M26N6 15M29N6 15M24N3 15M26N3 15M29N3 15M42N1 15M44N215M46N2 10M48N2 15M44N6 15M46N6 15M49N6 15M412N6 15M416N6 15M424N615M44N3 15M45N3 15M46N3 15M49N3 15M48N8 15M62N1 15M64N2 15M66N210M68N2 15M64N6 15M66N6 15M69N6 15M612N6 15M616N6 15M64N3 15M66N315M69N3 15M69N40 10M68N8 15M82N1 15M84N2 15M86N2 10M88N2 15M84N615M86N6 15M89N6 15M812N6 15M816N6 15M84N3 15M86N3 15M89N3 15M89N4010M812N8 10M124N2 10M126N2 10M128N2 10M124N6 10M126N6 10M129N610M1212N6 10M1216N6 10M124N3 10M126N3 10M129N3 10M122N8 10M166N210M168N2 10M166N6 10M169N6 10M1612N6 10M1616N6 10M166N3 10M169N310M168N8 6M24C2 6M26C2 4M28C2 6M24C6 6M26C6 6M29C6 6M24C3 6M26C36M29C3 15M22C8 15M24C815M26C8 15M28C8 15M224C6 6M42D1 6M46D2 4M48D26M44D6 6M46D6 6M49D6 6M412D6 6M44D3 6M46D3 6M49D3 15M42D8 15M44D815M46D8 15M48D8 10M412D8 6M62D1 6M64D2 4M68D2 6M64D6 6M66D6 6M69D66M612D6 6M616D6 6M64D3 6M66D3 6M69D3 15M62D8 15M64D8 15M66D815M68D8 10M612D8 10M616D8 15M624D6 4M82D1 4M84D2 4M86D2 4M84D64M86D6 4M89D6 4M812D6 4M816D6 4M84D3 4M86D3 4M89D3 10M82D8 10M84D810M86D8 10M88D8 10M812D8 10M816D8 15MX42K1 6MX44K2 6MX46K2 4MX48K220M46K6 20M49K6 20M412K6 20M416K6 20M44K3 20M45K3 20M46K3 20M49K315MX42K8 15MX44K8 15MX46K8 15MX48K8 10MX412K8 15MX62K1 6MX64K26MX66K2 4MX68K2 20M64K6 20M69K6 20M612K6 20M616K6 20M64K3 20M65K320M66K3 20M69K3 15MX62K8 15MX64K8 15MX66K8 15MX68K8 10MX612K810MX616K8 15MX92K1 6MX94K2 6MX96K2 4MX98K2 20M94K6 20M96K6 20M912K620M916K6 20M94K3 20M95K3 20M96K3 20M99K3 15MX92K8 15MX94K8 15MX96K815MX98K8 10MX912K8 10MX916K8 6MX124K2 6MX126K2 4MX128K2 20M124K620M126K6 20M129K6 20M1216K6 20M124K3 20M125K3 20M126K3 20M129K320M129K40 15MX124K8 15MX126K8 15MX128K8 10MX1212K8 10MX1216K86MX162K2 6MX164K2 6MX166K2 4MX168K2 20M164K6 20M166K6 20M169K620M1612K6 20M164K3 20M166K3 20M169K3 15MX164K8 15MX166K8 15MX168K810MX1612K8 10MX1616K8 15M244K6
Couplings
60F4433 60F4633 60F4933 60F4533 43F4163360F6633 60F6933 60F6533
20FX4466 20F4666 20F4966 20F41266 20F4166620F4463 20F4663 20F4963 20F4563 20F41663 20FX6666 20F6966 20F6126620F61666 20F6463 20F6663 20F6963 20F6563 20F61663 20FX9966 20F9126620F91666 20F9463 20F9663 20F9963 20F9563 20FX12 20F121666 20F1246320F12663 20F12963 20F12563 20FX16 20F16463 20F16663 20F1696320F16563 15F221 6F2412 6F2612 4F2812 15F2416 15F2616 15F291615F21616 15F2413 15F2613 15F2913 6F4422 6F4622 4F4822 6F4426 6F46266F4926 6F4423 6F4623 6F4923 6F6622 4F6822 6F6426 6F6626 6F69266F61226 6F61626 6F6423 6F6623 6F6923 4F8822 4F8426 4F8626 4F89264F81226 4F81626 4F8423 4F8623 4F8923 15F2281 15F2482 15F268210F2882 15F2486 15F2686 15F2986 15F21286 15F2483 15F2683 15F298315F2583 15F4281 15F4482 15F4682 10F4882 15F4486 15F4686 15F498615F41286 15F41686 15F4483 15F4683 15F4983 15F4583 15F6281 15F648215F6682 10F6882 15F6486 15F6686 15F6986 15F61286 15F61686 15F648315F6683 15F6983 15F6583 15F8281 15F8482 15F8682 10F8882 15F848615F8686 15F8986 15F81286 15F81686 15F8483 15F8683 15F8983 15F858310F12882 10F12686 10F12986 10F121286 10F121686 10F12983 10F1698610F161686 10F16483 10F16983
43F61633 60F9933 40F9933 60F9533 43F91633150F5533 43F16 15M249K6 15M2412K6 15M2416K6 60F4433 60F4633 60F493360F4533 43F41633 60F6633 60F6933 60F6533 43F61633 60F9933 40F993360F9533 43F91633 150F5533 43F16 0F4433 60F4633 60F4933 60F453343F41633 60F6633 60F6933 60F6533 43F61633 60F9933 40F9933 60F953343F91633 150F5533 43F16 15MFAP6J6
Male/Male Adapters
15MAL2L2 15MAL2L4 15MAL4L4 10MAL8L810MAL6L8
15MAP4RH9 15MAP4RH12 15MAP4RH16 15MAP6RH915MAP6RH12 15MAP6RH16 15MAP8RH9 15MAP8RH12 15MAP8RH14 15MAP8RH1610MAP12RH12 10MAP12RH16 10MAP16RH16 10MAP12RH21 10MAP16RH2110MAP16RH9 26MARH9RH16 26MARH12RH16 26MARH16RH16 30MARH9RH1230MARH12RH12 40MARH9RH9 20MARH21RH21 26MAH4RH16 26MAH6RH1626MAH9RH16 30MAH4RH12 30MAH6RH12 30MAH9RH12 40MAH4RH9 40MAH6RH940MAH9RH9 20MAM4RH9 20MAM4RH12 20MAM4RH16 20MAM6RH9 20MAM6RH1220MAM6RH16 20MAM9RH9 20MAM9RH12 20MAM9RH14 20MAM9RH16 20MAM12RH920MAM12RH12 20MAM12RH16 20MAM12RH21 20MAM16RH9 20MAM16RH1220MAM16RH14 20MAM16RH16 20MAM16RH21 20MAM9RH21 15MAP4P4 15MAP4P615MAP4P8 15MAP6P6 15MAP6P8 15MAP8P8 15MAP4P4 15MAP4P6 15MAP4P815MAP6P6 15MAP6P8 15MAP8P8 15MAH4P4 15MAH4P6 15MAH4P8 15MAH6P415MAH6P6 15MAH6P8 15MAH9P4 15MAH9P6 15MAH9P8 15MAM4P4 15MAM4P615MAM4P8 15MAM6P4 15MAM6P6 15MAM6P8 15MAM9P4 15MAM9P6 15MAM9P815MAM12P4 15MAM12P6 15MAM12P8 15MAM16P4 15MAM16P6 15MAM16P810MAM9P16 10MAM12P12 10MAM12P16 10MAM16P16 10MAM9P12 15MAL2P215MAL2P4 15MAL4P2 15MAL6P4 10MAL8P6 15MAL2P8 15MAL4P8 15MAL6P810MAL8P12 10MAL8P8 40MAH9H9 60MAH4H4 60MAH4H5 60MAH4H6 60MAH4H960MAH5H6 60MAH6H6 60MAH6H9 60MAH9H9 150MAH5H5 20MAM4M4 20MAM4M620MAM4M9 20MAM4M12 20MAM4M16 20MAM6M6 20MAM6M9 20MAM6M12 20MAM6M1620MAM9M9 20MAM9M12 20MAM9M16 20MAM12M12 20MAM12M16 20MAM16M420MAM4M4 20MAM4M6 20MAM4M9 20MAM4M12 20MAM4M16 20MAM6M6 20MAM6M920MAM6M12 20MAM6M16 20MAM9M9 20MAM9M12 20MAM9M16 20MAM12M1220MAM12M16 20MAM16M4 20MAM16M16 15MAL2H4 10MAL2H6 15MAL4M410MAL8M9
QSS系列高压接头
15MAQ6P415MAQ9H415MAQ4RH9 15MAQ6RH9 15MAQ9RH9 15MAQ9RH12 15MAQ9RH16 15M44NQ15M46NQ 15M64NQ 15M66NQ 15M69NQ 15M84NQ 15M86NQ 15M89NQ 10M129NQ10M1212NQ 10M169NQ 10M1612NQ 15M812NQ 15M44BQ 15M46BQ 15M94BQ15M96BQ 15M99BQ 15M66BQ 15M912BQ 15M64KQ 15M66KQ 15M612KQ 15M94KQ15M96KQ 15M99KQ 15M912KQ 15M1212KQ 15M169KQ 15M1612KQ 15M49KQ15M44KQ 15M46KQ 15M64QQ 15M94QQ 15M96QQ 15M126QQ 15M129QQ 15M49QQ15M612QQ 15M912QQ 15M124QQ 15M44Q8 15M64Q8 15M66Q8 15M68Q8 15M94Q815M96Q8 15M98Q8 15M128Q8 15MFAP6J6
Male/Male JIC Adapters
20MAJ6J6 20MAJ4J4 20MAJ6J8 20MAJ8J8 20MAH4J420MAH4J6 20MAH4J8 20MAH6J4 20MAH6J6 20MAH6J8 20MAH9J4 20MAH9J620MAH9J8 20MAH4J10 20MAH4J2 15MAM4J12 15MAM6J12 15MAM9J1215MAM12J12 15MAM12J16 15MAM16J12 15MAM16J16 20MAM4J4 20MAM4J620MAM4J8 20MAM6J4 20MAM6J6 20MAM6J8 20MAM9J4 20MAM9J6 20MAM9J820MAM9J10 20MAM12J4 20MAM12J6 20MAM12J8 20MAM16J4 20MAM16J620MAM16J8 15MAM4J16 15MAM6J16 15MAM9J1615MAL4J4
15MAP4J4 15MAP4J6 15MAP4J8 15MAP4J12 15MAP6J415MAP6J6 15MAP6J8 15MAP6J12 15MAP8J4 15MAP8J8 15MAP8J12
Male/Female JIC Adapters
20MFAH4J4 20MFAM4J4 20MFAM4J6 20MFAJ12J415MFAJ4P4 15MFAJ4P8 20MFAJ4H4 20MFAJ4H6 20MFAJ4H9 20MFAJ6H620MFAJ4M4 20MFAJ4M6 20MFAJ4M9 20MFAJ4M12 20MFAJ4M16 20MFAJ6M420MFAJ6M6 20MFAJ6M9 20MFAJ6M12 20MFAJ6M16 20MFAJ8M4 20MFAJ8M620MFAJ8M9 20MFAJ8M12 20MFAJ8M16 15MFAJ12M4 15MFAJ12M6 15MFAJ12M915MFAJ12M12 15MFAJ12M16 15MFAJ16M4 15MFAJ16M6 15MFAJ16M915MFAJ16M12 15MFAJ16M16 20MFAJ4M4 20MFAJ4M6 20MFAJ4M9 20MFAJ4M1220MFAJ4M16 20MFAJ6M4 20MFAJ6M6 20MFAJ6M9 20MFAJ6M12 20MFAJ6M1620MFAJ8M4 20MFAJ8M6 20MFAJ8M9 20MFAJ8M12 20MFAJ8M16 15MFAJ12M415MFAJ12M6 15MFAJ12M9 15MFAJ12M12 15MFAJ12M16 15MFAJ16M4 15MFAJ16M615MFAJ16M9 15MFAJ16M12 15MFAJ16M16
Bulkhead系列
20BAMJ4FH420BAMJ6FH4 20BAMJ4FM4 20BAMJ4FM6 20BAMJ6FM4 20BAMJ6FM6 20BAMJ6FM920BAMJ8FM6 20BAMJ8FM9 20BAMJ8FM12 20BAMJ4FM12 20BAMJ6FM1220BAMJ8FM16 15BAMJ4FL4 15BAMP6FM6 15BAMP4FM4 15BAMP4FM640BAMRH9FH4 40BAMRH9FH9 30BAMRH12FH9 20BAMRH9FM6 20BAMRH9FM920BAMRH12FM9 20BAMRH12FM16 20BAMRH16FM16 20BAMRH9FM4
SAE O-Ring Adapters
M44MC2B M46MC2B M44MC3B M46MC3B M64MC3BM66MC3B M24MC6B M26MC6B M44MC6B M46MC6B M49MC6B M64MC6B M66MC6BM69MC6B M86MC6B M89MC6B M812MC6B M1012MC6B M1016MC6B M126MC6BM1212MC6B M1216MC6B M1616MC6B
Autoclave Engineers
Autoclave Engineers 接头 高温高压
Autoclave Engineers Adapters/Couplings接头
大工作压力：150,000 psi (103432bar)
工作温度范围：-423°F (-252°C) 到1200°F (649°C)
连接尺寸：1/16”到1”
材质：316SS
锥螺纹接头, 150,000 PSI - F 系列
派克Autoclave F 系列是高压锥螺纹接头，与派克 Autoclave 1/4" - 1"仪表管配套使用，应用广泛。这些锥螺纹接头工作压力可达 150,000 psi (10342 bar).
卡套接头, 15,000 PSI - SW 系列
派克SW 系列适用于压力不高于15,000 PSI的低压场合，利用Autoclave速度咬合连接形成安全安装。 这种单卡套连接方式提供简易安装、可靠气密性能。
锥螺纹接头，迷你系列- 15,000 PSI
派克Autoclave 迷你系列锥螺纹卡套接头适用于 1/16" - 1/8" 仪表管，工作压力可达 15,000 psi (1034 bar).
锥螺纹接头, 20,000 PSI - SF 系列
派克Autoclave SF 系列为中压锥螺纹接头，与派克Autoclave 仪表管配套使用，应用广泛. 这些锥螺纹接头工作压力可达 20,000 psi (1379 bar).
管接头，15，000PSI-P 系列
派克Autoclave P 系列中压接头，用于流体和气体应用。这些高品质接头尺寸 1/4"- 1" NPT ，大工作压力 15,000 PSI ，温度400°F (204°C)
15,000 PSI 单卡套接头 - QS 系列
派克Autoclave QS 系列接头承压范围高达 15,000 psi (1034 bar) ，适用通径从1/4" 至 1" 。
锥螺纹接头，酸性工矿-SOGWO 系列30,000 PSI
派克Autoclave SOGWO 系列高压含硫应用接头，工作压力可达30,000 psi (2068 bar) ，接管尺寸：1/4" -9/16"
22,500 PSI 扩口式卡套接头-FCC系列
派克抯扩口式卡套接头 (FCC)，承压高达22,500 PSI (1,550 bar)，适用于连接尺寸从1/4英寸到1英寸的弯头，三通接头，四通接头和螺纹转换接头。
Male to Female Adapters
Male-to-Female Adapters join female connections with other size tubing or pipe
Couplings and reducer coupling adapters.
Male to Male Adapters
Male-to-Male Adapters join two Female Connections
QSS (Quick Set System) Male to Male Adapters
Male-to-Male Adapters join female connections with other size tubing or pipe.
QSS (Quick Set System) Male to Female Adapters
JIC Adapters (Male to Male)
Male to Male JIC Adapters have one end machined with a 37° flare design
JIC Adapters (Male to Female)
Male-to-Female Adapters join female connections with other size tubing or pipe.
E-Z unio Adapters
O-ring Face Seal Adapter for Easy Removal
Butt-Weld Adapters
Female-to-Male Adapters for Butt-Welding to Tube or Pipe
Header Coupling Adapter
Female-to-Male for Welding to Tubing Headers
Bulkhead Adapters
Low, medium, high pressure bulkhead adapters
SAE O-ring Adapters
Male-to-Female SAE Adapters
Female Tube Caps
Tube Caps
Gauge Connectors Adapters
Autoclave高压接头
Autoclave高压接头-中国总代理的详细描述：
Autoclave高压接头规格参数
大工作压力：1034.3 MPa
工作温度范围：-423℉(-252℃) 到1200℉(649℃)
连接尺寸：1/16”到1”
材质：316SS
AutoclaveEngineers公司是以生产高压阀、接头和管子而*。压力可以从0到150,000 psi(10342 bar)，温度从-423°F(-252°C)到1200°F(649°C)。没有别的工厂能比Autoclave Engineers在高压要求方面做的更好，也没有别的工厂能比AutoclaveEngineers做的系统更可靠、更具有创新的特性。
Autoclave高压阀门：高压针阀、高压球阀、安全阀、仪表阀、特制的阀和阀组、接头、管子、压力表、热电偶、气动执行器。
应用领域:海上油井.石油化工及航天领域。
Autoclave高压接头型号 Male/Female Adapters
15M92R1 6M94R2 6M96R2 4M98R2 15M94R6 15M96R615M99R6 15M94R3 15M96R3 15M99R3
10M92R8 10M94R8 10M96R8 10M98R815M72E1 6M74E2 6M76E2 4M78E2 15M74E6 15M76E6
15M79E6 15M74E315M76E3 15M79E3 10M72E8 10M74E8 10M76E8 10M78E8 15M92E1
6M94E26M96E2 4M98E2 15M94E6 15M96E6 15M99E6 15M912E6 15M94E3 15M96E310M92E8
10M94E8 10M96E8 10M98E8 10M912E8 10M916E8 15M122E1 6M124E26M126E2 4M128E2
15M124E6 15M126E6 15M129E6 15M1212E6 15M1216E615M124E3 15M126E3 15M129E3
10M122E8 10M124E8 10M126E8 10M128E810M1212E8 10M1216E8 43M164B3 43M166B3
43M169B3 43M169B40 15M42B16M44B2 6M46B2 4M48B2 20M44B6 20M46B6 20M49B6 20M412B6
43M416B360M45B3 60M46B3 60M49B3 15M42B8 15M44B8 15M46B8 15M48B8 10M412B86M54B2
6M56B2 4M58B2 20M54B6 20M56B6 20M59B6 20M512B6 60M54B360M56B3 60M59B3 15M58B8
10M512B8 15M62B1 6M64B2 6M66B2 4M68B220M64B6 20M66B6 20M69B6 20M612B6 20M616B6
43M616B6 60M64B3 60M65B360M69B3 15M62B8 15M64B8 15M66B8 15M68B8 10M612B8
10M616B8 15M92B16M94B2 6M96B2 4M98B2 20M94B6 20M96B6 20M99B6 20M912B6
20M916B643M916B3 60M94B3 60M95B3 60M96B3 15M92B8 15M94B8 15M96B8
15M98B810M912B8 10M916B8 20M912G6 15M98G8 15M22N1 15M24N2 15M26N2
10M28N215M24N6 15M26N6 15M29N6 15M24N3 15M26N3 15M29N3 15M42N1 15M44N215M46N2
10M48N2 15M44N6 15M46N6 15M49N6 15M412N6 15M416N6 15M424N615M44N3 15M45N3
15M46N3 15M49N3 15M48N8 15M62N1 15M64N2 15M66N210M68N2 15M64N6 15M66N6 15M69N6
15M612N6 15M616N6 15M64N3 15M66N315M69N3 15M69N40 10M68N8 15M82N1 15M84N2
15M86N2 10M88N2 15M84N615M86N6 15M89N6 15M812N6 15M816N6 15M84N3 15M86N3 15M89N3
15M89N4010M812N8 10M124N2 10M126N2 10M128N2 10M124N6 10M126N6 10M129N610M1212N6
10M1216N6 10M124N3 10M126N3 10M129N3 10M122N8 10M166N210M168N2 10M166N6 10M169N6
10M1612N6 10M1616N6 10M166N3 10M169N310M168N8 6M24C2 6M26C2 4M28C2 6M24C6 6M26C6
6M29C6 6M24C3 6M26C36M29C3 15M22C8 15M24C815M26C8 15M28C8 15M224C6 6M42D1 6M46D2
4M48D26M44D6 6M46D6 6M49D6 6M412D6 6M44D3 6M46D3 6M49D3 15M42D8 15M44D815M46D8
15M48D8 10M412D8 6M62D1 6M64D2 4M68D2 6M64D6 6M66D6 6M69D66M612D6 6M616D6 6M64D3
6M66D3 6M69D3 15M62D8 15M64D8 15M66D815M68D8 10M612D8 10M616D8 15M624D6 4M82D1
4M84D2 4M86D2 4M84D64M86D6 4M89D6 4M812D6 4M816D6 4M84D3 4M86D3 4M89D3 10M82D8
10M84D810M86D8 10M88D8 10M812D8 10M816D8 15MX42K1 6MX44K2 6MX46K2
4MX48K220M46K6 20M49K6 20M412K6 20M416K6 20M44K3 20M45K3 20M46K3
20M49K315MX42K8 15MX44K8 15MX46K8 15MX48K8 10MX412K8 15MX62K1 6MX64K26MX66K2
4MX68K2 20M64K6 20M69K6 20M612K6 20M616K6 20M64K3 20M65K320M66K3 20M69K3
15MX62K8 15MX64K8 15MX66K8 15MX68K8 10MX612K810MX616K8 15MX92K1 6MX94K2 6MX96K2
4MX98K2 20M94K6 20M96K6 20M912K620M916K6 20M94K3 20M95K3 20M96K3 20M99K3
15MX92K8 15MX94K8 15MX96K815MX98K8 10MX912K8 10MX916K8 6MX124K2 6MX126K2
4MX128K2 20M124K620M126K6 20M129K6 20M1216K6 20M124K3 20M125K3 20M126K3
20M129K320M129K40 15MX124K8 15MX126K8 15MX128K8 10MX1212K8 10MX1216K86MX162K2
6MX164K2 6MX166K2 4MX168K2 20M164K6 20M166K6 20M169K620M1612K6 20M164K3 20M166K3
20M169K3 15MX164K8 15MX166K8 15MX168K810MX1612K8 10MX1616K8 15M244K6
Couplings
60F4433 60F4633 60F4933 60F4533 43F4163360F6633 60F6933 60F6533
20FX4466 20F4666 20F4966 20F41266 20F4166620F4463 20F4663 20F4963 20F4563
20F41663 20FX6666 20F6966 20F6126620F61666 20F6463 20F6663 20F6963 20F6563
20F61663 20FX9966 20F9126620F91666 20F9463 20F9663 20F9963 20F9563 20FX12
20F121666 20F1246320F12663 20F12963 20F12563 20FX16 20F16463 20F16663
20F1696320F16563 15F221 6F2412 6F2612 4F2812 15F2416 15F2616 15F291615F21616
15F2413 15F2613 15F2913 6F4422 6F4622 4F4822 6F4426 6F46266F4926 6F4423 6F4623
6F4923 6F6622 4F6822 6F6426 6F6626 6F69266F61226 6F61626 6F6423 6F6623 6F6923
4F8822 4F8426 4F8626 4F89264F81226 4F81626 4F8423 4F8623 4F8923 15F2281 15F2482
15F268210F2882 15F2486 15F2686 15F2986 15F21286 15F2483 15F2683 15F298315F2583
15F4281 15F4482 15F4682 10F4882 15F4486 15F4686 15F498615F41286 15F41686 15F4483
15F4683 15F4983 15F4583 15F6281 15F648215F6682 10F6882 15F6486 15F6686 15F6986
15F61286 15F61686 15F648315F6683 15F6983 15F6583 15F8281 15F8482 15F8682 10F8882
15F848615F8686 15F8986 15F81286 15F81686 15F8483 15F8683 15F8983
15F858310F12882 10F12686 10F12986 10F121286 10F121686 10F12983
10F1698610F161686 10F16483 10F16983
43F61633 60F9933 40F9933 60F9533 43F91633150F5533 43F16 15M249K6 15M2412K6
15M2416K6 60F4433 60F4633 60F493360F4533 43F41633 60F6633 60F6933 60F6533
43F61633 60F9933 40F993360F9533 43F91633 150F5533 43F16 0F4433 60F4633 60F4933
60F453343F41633 60F6633 60F6933 60F6533 43F61633 60F9933 40F9933
60F953343F91633 150F5533 43F16 15MFAP6J6
Male/Male Adapters
15MAL2L2 15MAL2L4 15MAL4L4 10MAL8L810MAL6L8
15MAP4RH9 15MAP4RH12 15MAP4RH16 15MAP6RH915MAP6RH12 15MAP6RH16 15MAP8RH9
15MAP8RH12 15MAP8RH14 15MAP8RH1610MAP12RH12 10MAP12RH16 10MAP16RH16 10MAP12RH21
10MAP16RH2110MAP16RH9 26MARH9RH16 26MARH12RH16 26MARH16RH16
30MARH9RH1230MARH12RH12 40MARH9RH9 20MARH21RH21 26MAH4RH16 26MAH6RH1626MAH9RH16
30MAH4RH12 30MAH6RH12 30MAH9RH12 40MAH4RH9 40MAH6RH940MAH9RH9 20MAM4RH9
20MAM4RH12 20MAM4RH16 20MAM6RH9 20MAM6RH1220MAM6RH16 20MAM9RH9 20MAM9RH12
20MAM9RH14 20MAM9RH16 20MAM12RH920MAM12RH12 20MAM12RH16 20MAM12RH21 20MAM16RH9
20MAM16RH1220MAM16RH14 20MAM16RH16 20MAM16RH21 20MAM9RH21 15MAP4P4
15MAP4P615MAP4P8 15MAP6P6 15MAP6P8 15MAP8P8 15MAP4P4 15MAP4P6 15MAP4P815MAP6P6
15MAP6P8 15MAP8P8 15MAH4P4 15MAH4P6 15MAH4P8 15MAH6P415MAH6P6 15MAH6P8 15MAH9P4
15MAH9P6 15MAH9P8 15MAM4P4 15MAM4P615MAM4P8 15MAM6P4 15MAM6P6 15MAM6P8 15MAM9P4
15MAM9P6 15MAM9P815MAM12P4 15MAM12P6 15MAM12P8 15MAM16P4 15MAM16P6
15MAM16P810MAM9P16 10MAM12P12 10MAM12P16 10MAM16P16 10MAM9P12 15MAL2P215MAL2P4
15MAL4P2 15MAL6P4 10MAL8P6 15MAL2P8 15MAL4P8 15MAL6P810MAL8P12 10MAL8P8 40MAH9H9
60MAH4H4 60MAH4H5 60MAH4H6 60MAH4H960MAH5H6 60MAH6H6 60MAH6H9 60MAH9H9 150MAH5H5
20MAM4M4 20MAM4M620MAM4M9 20MAM4M12 20MAM4M16 20MAM6M6 20MAM6M9 20MAM6M12
20MAM6M1620MAM9M9 20MAM9M12 20MAM9M16 20MAM12M12 20MAM12M16 20MAM16M420MAM4M4
20MAM4M6 20MAM4M9 20MAM4M12 20MAM4M16 20MAM6M6 20MAM6M920MAM6M12 20MAM6M16
20MAM9M9 20MAM9M12 20MAM9M16 20MAM12M1220MAM12M16 20MAM16M4 20MAM16M16 15MAL2H4
10MAL2H6 15MAL4M410MAL8M9
QSS系列高压接头
15MAQ6P415MAQ9H415MAQ4RH9 15MAQ6RH9 15MAQ9RH9 15MAQ9RH12 15MAQ9RH16
15M44NQ15M46NQ 15M64NQ 15M66NQ 15M69NQ 15M84NQ 15M86NQ 15M89NQ 10M129NQ10M1212NQ
10M169NQ 10M1612NQ 15M812NQ 15M44BQ 15M46BQ 15M94BQ15M96BQ 15M99BQ 15M66BQ
15M912BQ 15M64KQ 15M66KQ 15M612KQ 15M94KQ15M96KQ 15M99KQ 15M912KQ 15M1212KQ
15M169KQ 15M1612KQ 15M49KQ15M44KQ 15M46KQ 15M44Q8 15M64Q8 15M66Q8 15M68Q8
15M94Q815M96Q8 15M98Q8 15M128Q8 15MFAP6J6
Male/Male JIC Adapters
20MAJ6J6 20MAJ4J4 20MAJ6J8 20MAJ8J8 20MAH4J420MAH4J6 20MAH4J8 20MAH6J4 20MAH6J6
20MAH6J8 20MAH9J4 20MAH9J620MAH9J8 20MAH4J10 20MAH4J2 15MAM4J12 15MAM6J12
15MAM9J1215MAM12J12 15MAM12J16 15MAM16J12 15MAM16J16 20MAM4J4 20MAM4J620MAM4J8
20MAM6J4 20MAM6J6 20MAM6J8 20MAM9J4 20MAM9J6 20MAM9J820MAM9J10 20MAM12J4
20MAM12J6 20MAM12J8 20MAM16J4 20MAM16J620MAM16J8 15MAM4J16 15MAM6J16
15MAM9J1615MAL4J4
15MAP4J4 15MAP4J6 15MAP4J8 15MAP4J12 15MAP6J415MAP6J6 15MAP6J8 15MAP6J12
15MAP8J4 15MAP8J8 15MAP8J12
Male/Female JIC Adapters
20MFAH4J4 20MFAM4J4 20MFAM4J6 20MFAJ12J415MFAJ4P4 15MFAJ4P8 20MFAJ4H4 20MFAJ4H6
20MFAJ4H9 20MFAJ6H620MFAJ4M4 20MFAJ4M6 20MFAJ4M9 20MFAJ4M12 20MFAJ4M16
20MFAJ6M420MFAJ6M6 20MFAJ6M9 20MFAJ6M12 20MFAJ6M16 20MFAJ8M4 20MFAJ8M620MFAJ8M9
20MFAJ8M12 20MFAJ8M16 15MFAJ12M4 15MFAJ12M6 15MFAJ12M915MFAJ12M12 15MFAJ12M16
15MFAJ16M4 15MFAJ16M6 15MFAJ16M915MFAJ16M12 15MFAJ16M16 20MFAJ4M4 20MFAJ4M6
20MFAJ4M9 20MFAJ4M1220MFAJ4M16 20MFAJ6M4 20MFAJ6M6 20MFAJ6M9 20MFAJ6M12
20MFAJ6M1620MFAJ8M4 20MFAJ8M6 20MFAJ8M9 20MFAJ8M12 20MFAJ8M16
15MFAJ12M415MFAJ12M6 15MFAJ12M9 15MFAJ12M12 15MFAJ12M16 15MFAJ16M4
15MFAJ16M615MFAJ16M9 15MFAJ16M12 15MFAJ16M16
Bulkhead系列
20BAMJ4FH420BAMJ6FH4 20BAMJ4FM4 20BAMJ4FM6 20BAMJ6FM4 20BAMJ6FM6
20BAMJ6FM920BAMJ8FM6 20BAMJ8FM9 20BAMJ8FM12 20BAMJ4FM12 20BAMJ6FM1220BAMJ8FM16
15BAMJ4FL4 15BAMP6FM6 15BAMP4FM4 15BAMP4FM640BAMRH9FH4 40BAMRH9FH9 30BAMRH12FH9
20BAMRH9FM6 20BAMRH9FM920BAMRH12FM9 20BAMRH12FM16 20BAMRH16FM16 20BAMRH9FM4
SAE O-Ring Adapters
M44MC2B M46MC2B M44MC3B M46MC3B M64MC3BM66MC3B M24MC6B M26MC6B M44MC6B M46MC6B
M49MC6B M64MC6B M66MC6BM69MC6B M86MC6B M89MC6B M812MC6B M1012MC6B M1016MC6B
M126MC6BM1212MC6B M1216MC6B M1616MC6B
锥螺纹接头, 150,000 PSI - F 系列
派克Autoclave F 系列是高压锥螺纹接头，与派克 Autoclave 1/4" - 1"仪表管配套使用，应用广泛。这些锥螺纹接头工作压力可达 150,000 psi (10342 bar).
卡套接头, 15,000 PSI - SW 系列
派克SW 系列适用于压力不高于15,000 PSI的低压场合，利用Autoclave速度咬合连接形成安全安装。 这种单卡套连接方式提供简易安装、可靠气密性能。
锥螺纹接头，迷你系列- !5,000 PSI
派克Autoclave 迷你系列锥螺纹卡套接头适用于 1/16" - 1/8" 仪表管，工作压力可达 15,000 psi (1034 bar).
锥螺纹接头, 20,000 PSI - SF 系列
派克Autoclave SF 系列为中压锥螺纹接头，与派克Autoclave 仪表管配套使用，应用广泛. 这些锥螺纹接头工作压力可达 20,000 psi (1379 bar).
管接头，15，000PSI-P 系列
派克Autoclave P 系列中压接头，用于流体和气体应用。这些高品质接头尺寸 1/4"- 1" NPT ，大工作压力 15,000 PSI ，温度400°F (204°C)
15,000 PSI 单卡套接头 - QS 系列
派克Autoclave QS 系列接头承压范围高达 15,000 psi (1034 bar) ，适用通径从1/4" 至 1" 。
锥螺纹接头，酸性工矿-SOGWO 系列30,000 PSI
派克Autoclave SOGWO 系列高压含硫应用接头，工作压力可达30,000 psi (2068 bar) ，接管尺寸：1/4" -9/16"
22,500 PSI 扩口式卡套接头-FCC系列
派克抯扩口式卡套接头 (FCC)，承压高达22,500 PSI (1,550 bar)，适用于连接尺寸从1/4英寸到1英寸的弯头，三通接头，四通接头和螺纹转换接头。
Autoclave Engineers工厂以生产的高压阀、接头和管子而***。压力可以从 0到150,000 psi (10342 bar)，温度从-423°F (-252°C) 到1200°F (649°C)。 没有别的工厂能比Autoclave Engineers 在高压要求方面做的更好，也没有别的工厂能比Autoclave Engineers做的系统***、更具有***特性。
Autoclave Engineer 亮相2012Cippe第十二届中国国际石油石化技术装备展览会 。Autoclave Engineer产品包括气驱液压泵、高温高压磁力泵，***压针阀、球阀、单向阀、安全阀、仪表阀、不锈钢管、接头，高温高压反应釜、管式反应器、小型反应系统等。 依托产品资源及工厂的大力支持，我们在海上钻井、石油石化、天然气、航空航天、***、电力、机床模具、工程机械、实验室设备等行业和领域取得了良好业绩，同时也拥有了大量***客户，也请广大新老客户继续给予支持，我们也会加倍努力，为您提供更***。
Parker Autoclave Engineers: High Pressure, High Temperature Technology | Parker Autoclave Engineers is a member of the Instrumentation Products Divison of Parker-Hannifin, a global manufacturer of high pressure valves, fittings, tubing, and air-driven liquid pumps. Parker Autoclave Engineers manufacturers products to operate under extreme pressure and temperature conditions. With pressures ranges 10,000 psi, 20,000 psi, 30,000 psi, 60,000 psi, 100,000 psi and 150,000 psi we are the first choice for the petrochemical, chemical, waterblast, waterjet, and oil and gas industries.| Parker, Autoclave, Engineers, Snap-tite, Valves, fittings, tubing, air driven, liquid pumps, instrumentation, products | Browse All Categories in the Parker / Autoclave Engineers FCD catalog including High Pressure Needle Valves, Pneumatic Valve Actuators, High Pressure Fittings and Tubing, High Pressure Adapters/Couplings, High Pressure Ball Valves | needle valves,valve actuators, fittings and tubing, adapters, couplings, ball valves, relief valves, custom valves, adapters, manifolds, accessories, sour service, instrumentation, valves, tools, installation, opreatioon, maintenance, technical information, products | PRODUCTS - Parker Autoclave Engineers Parker Autoclave Engineers is a member of the Instrumentation Products Divison of Parker-Hannifin, a global manufacturer of high pressure valves, fittings, tubing, and air-driven liquid pumps. Parker Autoclave Engineers manufacturers products to operate under extreme pressure and temperature conditions. With pressures ranges 10,000 psi, 20,000 psi, 30,000 psi, 60,000 psi, 100,000 psi and 150,000 psi we are the first choice for the petrochemical, chemical, waterblast, waterjet, and oil and gas industries
Autoclave Engineers高压阀门：高压针阀、高压球阀、安全阀、仪表阀、***的阀和阀组、接头、管子、压力表、热电偶、气动执行器。Autoclave Engineers应用领域: 海上油井, 石油化工及航天领域。
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
15MAP4J4 1/4” 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP4J6 1/4” 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP4J8 1/4” 1/2” 1.00 (25.4) 1.94 (49.1)
15MAP4J12 1/4” 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP6J4 3/8” 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP6J6 3/8” 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP6J8 3/8” 1/2” 1.00 (25.4) 1.81 (46.0)
15MAP6J12 3/8” 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP8J4 1/2” 1/4” 0.94 (23.8) 2.00 (50.8)
15MAP8J6 1/2” 3/8” 0.94 (23.8) 2.00 (50.8)
15MAP8J8 1/2” 1/2” 1.00 (25.4) 2.13 (54.0)
15MAP8J12 1/2” 3/4” 1.38 (34.9) 2.44 (61.9)
15MAP12J8 3/4” 1/2” 1.19 (30.2) 2.38 (60.3)
15MAP12J12 3/4” 3/4” 1.38 (34.9) 2.50 (63.5)
15MAP16J16 1” 1” 1.50 (38.1) 3.00 (76.2)
Emerson 05D0083G01
Emerson 5X00106G01
Emerson 5X00109G01
Emerson 1C31233G01
Emerson 1C31238H01
Emerson 1C31122G01
Emerson 1C31125G01
Emerson 1C31166G01
Emerson 1C31169G02
Emerson 5X00247G01
Emerson 1B30035G01
Emerson 1X00786G01
Emerson 1X00788G01
Emerson 5A26137G14
Emerson 5X00585G03
Emerson 5A26144G03
Emerson 5X00525G05
Yokogawa ALE 111
Relpol MRI-32/24VDC/relpol
Moxa PT-7828-R-24
Emerson 05D0083G01
Emerson 5X00106G01
Emerson 5X00109G01
Emerson 1C31233G01
Emerson 1C31238H01
Emerson 1C31122G01
Emerson 1C31125G01
Emerson 1C31166G01
Emerson 1C31169G02
Emerson 5X00247G01
Emerson 1B30035G01
Emerson 1X00786G01
横河 ALE 111 通信模块 ALE 111
Relpol MRI-32/24VDC/relpol 端子面板 MRI-32/24VDC/relpol
Moxa PT-7828-R-24 MOXA 24 端口交换机
艾默生 05D0083G01 电源 05D0083G01
艾默生5X00106G01“CPU模拟量输入模块
HART 协议 5X00106G01"
艾默生 5X00109G01“CPU 输入模块
带 HART 协议的模拟量输入 5X00109G01"
艾默生1C31233G01“CPU接点输入模块
电源=24V 1C31233G01”
艾默生1C31238H01“CPU输入模块
与源接触输入
电源=24V 1C31238H01"
艾默生1C31122G01“CPU数字量输出模块
信号电平高达 60V 1C31122G01"
艾默生1C31125G01“CPU模块输入模块
带电平的离散输出
信号高达 60V 1C31125G01"
艾默生1C31166G01“CPU通讯模块
适用于机柜 1C31166G01"
艾默生1C31169G02“CPU模块输入模块
机柜通讯 1C31169G02"
艾默生 5X00247G01 CPU OCR400 5X00247G01
艾默生 1B30035G01 模块插槽 1B30035G01
艾默生 1X00786G01 右分支终端器 1X00786G01
艾默生 1X00788G01 左分支终端器 1X00788G01
艾默生 5A26137G14“从 PDM 面板到
控制器 5A26137G14"
艾默生 5X00585G03 从 PDM 面板到 ROP 5X00585G03 的电缆
艾默生 5A26144G03 PDM 面板接地电缆 5A26144G03
艾默生 5X00525G05" 电源线
电源高达 PDM 5X00525G05"
Emerson 1X00788G01
Emerson 5A26137G14
Emerson 5X00585G03
Emerson 5A26144G03
Emerson 5X00525G05
Emerson 05D0083G01
Emerson 5X00106G01
Emerson 5X00109G01
Emerson 1C31233G01
Emerson 1C31238H01
Emerson 1C31122G01
横河 ALE 111 通信模块 ALE 111
Relpol MRI-32/24VDC/relpol 端子面板 MRI-32/24VDC/relpol
Moxa PT-7828-R-24 MOXA 24 端口交换机
艾默生 05D0083G01 电源 05D0083G01
艾默生5X00106G01“CPU模拟量输入模块
HART 协议 5X00106G01"
艾默生 5X00109G01“CPU 输入模块
带 HART 协议的模拟量输入 5X00109G01"
艾默生1C31233G01“CPU接点输入模块
电源=24V 1C31233G01”
艾默生1C31238H01“CPU输入模块
与源接触输入
电源=24V 1C31238H01"
艾默生1C31122G01“CPU数字量输出模块
信号电平高达 60V 1C31122G01"
艾默生1C31125G01“CPU模块输入模块
带电平的离散输出
信号高达 60V 1C31125G01"
艾默生1C31166G01“CPU通讯模块
适用于机柜 1C31166G01"
艾默生1C31169G02“CPU模块输入模块
机柜通讯 1C31169G02"
艾默生 5X00247G01 CPU OCR400 5X00247G01
艾默生 1B30035G01 模块插槽 1B30035G01
艾默生 1X00786G01 右分支终端器 1X00786G01
艾默生 1X00788G01 左分支终端器 1X00788G01
艾默生 5A26137G14“从 PDM 面板到
控制器 5A26137G14"
艾默生 5X00585G03 从 PDM 面板到 ROP 5X00585G03 的电缆
艾默生 5A26144G03 PDM 面板接地电缆 5A26144G03
艾默生 5X00525G05" 电源线
电源高达 PDM 5X00525G05"
Emerson 1C31125G01
Emerson 1C31166G01
Emerson 1C31169G02
Emerson 5X00247G01
DCS 8-125E
DCS 10-100E
DCS 20-50E
DCS 33-33E
DCS 40-25E
DCS 50-20E
DCS 60-18E
DCS 80-13E
DCS 100-10E
DCS 150-7E
DCS 300-3.5E
DCS 600-1.7E
DCS 8-140E
赵丑往按S 10-120E
DCS 20-60E
DCS 33-36E
DCS 40-30E
DCS 50-24E
DCS 60-20E
DCS 80-15E
DCS 100-12E
DCS 150-8E
DCS 300-4E
ATLAS COPCO 5750500741 INSERT
ATLAS COPCO 91000660 SADDLE, MAG, STEM-ABUTTED, -15
ATLAS COPCO 91001951
ATLAS COPCO 45102196 O-RING
ATLAS COPCO 45102195 SEAL CUP
ATLAS COPCO 90513376
ATLAS COPCO 91002696
ATLAS COPCO 90514652
ATLAS COPCO 90516257 PILOT ADAPTER
ATLAS COPCO 91001488 WASHER
ATLAS COPCO 91002025 CUTTER, RCC KERF 5R
ATLAS COPCO 90513401
ATLAS COPCO 91002026 CUTTER, RCC KERF 4R
ATLAS COPCO 91002740
ATLAS COPCO 90513252
ATLAS COPCO 91003276 PILOT BIT, 12 01/04 PRIMO83
ATLAS COPCO 91000661 SADDLE, MAG, INNER, 11 DEGREE
ATLAS COPCO 90514647
ATLAS COPCO 91001875
ATLAS COPCO 92010667 RAISEBORE STABILIZER 6RS 12.25
ATLAS COPCO 90513203
ATLAS COPCO 90513392
ATLAS COPCO 91001997=91003276
DCS 8-350E
DCS 12-250E
DCS 20-150E
T坑偌贬CS 40-75E
DCS 55-55E
DCS 60-50E
DCS 80-37E
DCS 150-20E
DCS 8-125E
DCS 10-100ED馊徘S 2惫逮0-50EDCS 33-33E
DCS 40-25E
DCS 50-20E
DCS 60-18E
DCS 80-13E
DCS 100-10E
DCS 150-7EDCS 300-3.5EDCS 600-1.7E
DCS 8-140E
DCS 10-120E
DCS 20-60E
DCS 33-36E
DCS 40-30E
DCS 50-24E
DCS 8-125E
DCS 10-100E
D鹳草疾病S惩旦20-50E
DCS 33-33EDCS 40-25E
DCS 50-20E
DCS 60-18E
D擘明悻酪S蓉阿扮哺80-13E
DCS 100-10E
DCS 150-7E
DCS 300-3.5E
DCS 600-1.7E
DCS 8-140E
DCS 10-120E
DCS 20-60E
DCS 33-36E
DCS 8-125E
DCS 10-100E
DCS 20-50E
DCS 33-33E
DCS 40-25E
DCS 50-20E
DCS 60-18E
DCS 80-13E
DCS 100-10E
DCS 150-7E
DCS 300-3.5E
DCS 600-1.7E
DCS 8-140E
DCS 10-120E
DCS 20-60E
DCS 33-36E
DCS 40-30E
Sorensen DCS12-250
Sorensen DCS150-20
Sorensen DCS150-7E
Sorensen DCS150-8E
Sorensen DCS10-100E
Sorensen DCS10-120E
Sorensen DCS100-12E
Sorensen DCS8-350
Sorensen DCS40-75
Sorensen DCS55-55
DCS 50-24E
DCS 60-20E
DCS 80-15E
DCS 100-12E
DCS 150-8E
DCS 300-4E
DCS8-350E
DCS 12-250E
DCS 20-150E
DCS 40-75E
PVC FLANSCH 225 MM, DN200, PN 10 GF # 721700020
1. MESS ROOM FAN
FAN EL. MOTOR 1pc
Maker: Siemens; Type: 1LA70962AA10-Z; 460V; 50-60 HZ; 2,55 KWT; 4.5A; 3480 rpm; PRO.TERM C
ATLAS COPCO 5750500741 INSERT
ATLAS COPCO 91000660 SADDLE, MAG, STEM-ABUTTED, -15
ATLAS COPCO 91001951
ATLAS COPCO 45102196 O-RING
ATLAS COPCO 45102195 SEAL CUP
ATLAS COPCO 90513376
ATLAS COPCO 91002696
ATLAS COPCO 90514652
ATLAS COPCO 90516257 PILOT ADAPTER
ATLAS COPCO 91001488 WASHER
ATLAS COPCO 91002025 CUTTER, RCC KERF 5R
ATLAS COPCO 90513401
ATLAS COPCO 91002026 CUTTER, RCC KERF 4R
ATLAS COPCO 91002740
ATLAS COPCO 90513252
ATLAS COPCO 91003276 PILOT BIT, 12 01/04 PRIMO83
ATLAS COPCO 91000661 SADDLE, MAG, INNER, 11 DEGREE
ATLAS COPCO 90514647
ATLAS COPCO 91001875
ATLAS COPCO 92010667 RAISEBORE STABILIZER 6RS 12.25
ATLAS COPCO 90513203
ATLAS COPCO 90513392
ATLAS COPCO 91001997=91003276
. SANITARY EXHAUST FAN
FAN EL. MOTOR 1pc
Maker: Siemens; Type: 1LA70962AA10-Z; 460V; 50-60 HZ; 2,55 KWT; 4.5A; 3480 rpm; PRO.TERM C
螺纹插件 5750500741 Epiroc
缩短的激振杆鞍座 91000660 Atlas Copco
螺钉 M36-4x140 mm 91001951 Atlas Copco
O 形圈 457 45102196 阿特拉斯-科普柯
密封盖 45102195 阿特拉斯-科普柯
螺栓 M24-3x80 毫米 90513376 阿特拉斯-科普柯
膨胀机法兰柄（激振杆） 91002696 阿特拉斯-科普柯
HH 螺母 36 90514652 阿特拉斯-科普柯
先导适配器 R32 (0090516257)
齿形防松垫圈 NL24 91001488 阿特拉斯-科普柯
钻头 5 排 91002025 阿特拉斯-科普柯
齿形防松垫圈 M36 90513401 阿特拉斯-科普柯
钻头 4 排 91002026 阿特拉斯-科普柯
外围座 91002740
连接销 90513252 阿特拉斯-科普柯
先导钻头 91003276 D=311 mm 阿特拉斯-科普柯
内部鞍座 91000661 阿特拉斯-科普柯
螺栓 M36-4x180 mm Gr.8.8 90514647 阿特拉斯-科普柯
双锥夹紧环 91001875 360x455 阿特拉斯-科普柯
六肋稳定器 92010667 阿特拉斯-科普柯
齿形防松垫圈 NL24 90513203 阿特拉斯-科普柯
锁紧垫圈 90513392 阿特拉斯-科普柯
先导钻头 D 12-1/4" (311 mm) 91001997 阿特拉斯-科普柯
Art-Nr.: 649636000
GTIN-Nr.: 7612988165072
Hersteller-Nr.: 721700020
Hersteller: Georg Fischer
DCS 55-55E
DCS 60-50E
DCS 80-37E
D唰C俪哀返隘 150-20E
DCS 40-30E
DCS 50-24E
DCS 60-20E
DCS 80-15E
DCS 100-12E
Georg Fischer 225 721700020法兰 KAMMER、VALTEK、+GF+ Georg Fischer、Cash & Bailey、Klinger Schoneberg、Kempchen、Chemvalve、TAI MILANO、DONADON SDD、Bernard Actuator、Tranter Heat Exchanger、ORBINOX、NDV、Pekos、Copes-Vulcan、REGO、STRIKO
Atlas Copco阿特拉斯-科普柯 5750500741
Atlas Copco阿特拉斯-科普柯 91000660
Atlas Copco阿特拉斯-科普柯 91001951
Atlas Copco阿特拉斯-科普柯 45102196
Atlas Copco阿特拉斯-科普柯 45102195
Atlas Copco阿特拉斯-科普柯 90513376
Atlas Copco阿特拉斯-科普柯 91002696
Atlas Copco阿特拉斯-科普柯 90514652
Atlas Copco阿特拉斯-科普柯 90516257
Atlas Copco阿特拉斯-科普柯 91001488
Atlas Copco阿特拉斯-科普柯 91002025
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF, Type of product - Faucet, Manufacturer - Neval, Brand of pipeline fittings - 286556, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - with a set of counter flanges (with KOF)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali, Type of product - Crane, Manufacturer - Neval, Brand of pipeline fittings - 286406, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/ etc.), Type of drive - manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Full description
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285511, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (int) - 16 kgf/cm2, Type of connection to the pipeline (tek) - flanged (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - water, oil, complete set (tech) - not required
Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 284410, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284411, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with COF and liquid. Crane Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with KOF and cr, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285509, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tech) - water, oil, Complete set (tech) - with a set of counter flanges, fasteners (with KOF and cr.)
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 285506, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 235508, Nominal bore, mm - 40, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 286409, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive avg. Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive cf, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286405, Nominal passage, mm (dec) - 20.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (n / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment ( tek) - aggressive sr, Completeness (tek) - Not required
Faucet Naval 286557 Du32 Ru40 fl. from manual pr. aggressive avg. Crane Naval 286557 Du32 Ru40 fl. from manual pr. aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286557, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - aggressive sr, Completeness (tech) - Not required
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 284159 Du50 Ru40 threads. from manual pr. non-aggressive cf. Faucet Naval 284159 DN50 PN40 threads. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284159, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - non-aggressive, Complete set ( tech) - not required
Faucet Naval 284157 Du32 Ru40 threads. from manual pr. non-aggressive environment Crane Naval 284157 Du32 Ru40 carving. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284157, Nominal diameter, mm (des) - 32 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working environment (tek) - non-aggressive, Complete set ( tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required, Working environment (tek) - not aggressive, Completeness (tek) - not required
Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280509, Nominal passage, mm (dec) - 50 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - flanged (flanged), Type of drive (act) - with manual drive (with manual pr.), Electric drive brand (act) - not required, Working environment (act) - not aggressive, Completeness (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284403, Nominal diameter, mm (des) - 15 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Atlas Copco阿特拉斯-科普柯 90513401
Atlas Copco阿特拉斯-科普柯 91002026
Atlas Copco阿特拉斯-科普柯 91002740
Atlas Copco阿特拉斯-科普柯 90513252
Atlas Copco阿特拉斯-科普柯 91003276
Atlas Copco阿特拉斯-科普柯 91000661
Atlas Copco阿特拉斯-科普柯 90514647
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF, Type of product - Faucet, Manufacturer - Neval, Brand of pipeline fittings - 286556, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - with a set of counter flanges (with KOF)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali, Type of product - Crane, Manufacturer - Neval, Brand of pipeline fittings - 286406, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/ etc.), Type of drive - manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Full description
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285511, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (int) - 16 kgf/cm2, Type of connection to the pipeline (tek) - flanged (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - water, oil, complete set (tech) - not required
Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 284410, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284411, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with COF and liquid. Crane Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with KOF and cr, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285509, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tech) - water, oil, Complete set (tech) - with a set of counter flanges, fasteners (with KOF and cr.)
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 285506, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 235508, Nominal bore, mm - 40, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 286409, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive avg. Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive cf, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286405, Nominal passage, mm (dec) - 20.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (n / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment ( tek) - aggressive sr, Completeness (tek) - Not required
Faucet Naval 286557 Du32 Ru40 fl. from manual pr. aggressive avg. Crane Naval 286557 Du32 Ru40 fl. from manual pr. aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286557, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - aggressive sr, Completeness (tech) - Not required
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 284159 Du50 Ru40 threads. from manual pr. non-aggressive cf. Faucet Naval 284159 DN50 PN40 threads. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284159, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - non-aggressive, Complete set ( tech) - not required
Faucet Naval 284157 Du32 Ru40 threads. from manual pr. non-aggressive environment Crane Naval 284157 Du32 Ru40 carving. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284157, Nominal diameter, mm (des) - 32 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working environment (tek) - non-aggressive, Complete set ( tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required, Working environment (tek) - not aggressive, Completeness (tek) - not required
Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280509, Nominal passage, mm (dec) - 50 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - flanged (flanged), Type of drive (act) - with manual drive (with manual pr.), Electric drive brand (act) - not required, Working environment (act) - not aggressive, Completeness (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284403, Nominal diameter, mm (des) - 15 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Atlas Copco阿特拉斯-科普柯 91001875
Atlas Copco阿特拉斯-科普柯 92010667
Atlas Copco阿特拉斯-科普柯 90513203
Atlas Copco阿特拉斯-科普柯 90513392
Atlas Copco阿特拉斯-科普柯 91001997
Atlas Copco 5750500741
Atlas Copco 91000660
Atlas Copco 91001951
Atlas Copco 45102196
Atlas Copco 45102195
Atlas Copco 90513376
Atlas Copco 91002696
Atlas Copco 90514652
Atlas Copco 90516257
Atlas Copco 91001488
Atlas Copco 91002025
Atlas Copco 90513401
Atlas Copco 91002026
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF, Type of product - Faucet, Manufacturer - Neval, Brand of pipeline fittings - 286556, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - with a set of counter flanges (with KOF)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali, Type of product - Crane, Manufacturer - Neval, Brand of pipeline fittings - 286406, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/ etc.), Type of drive - manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Full description
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285511, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (int) - 16 kgf/cm2, Type of connection to the pipeline (tek) - flanged (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - water, oil, complete set (tech) - not required
Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 284410, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284411, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with COF and liquid. Crane Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with KOF and cr, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285509, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tech) - water, oil, Complete set (tech) - with a set of counter flanges, fasteners (with KOF and cr.)
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 285506, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 235508, Nominal bore, mm - 40, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 286409, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive avg. Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive cf, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286405, Nominal passage, mm (dec) - 20.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (n / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment ( tek) - aggressive sr, Completeness (tek) - Not required
Faucet Naval 286557 Du32 Ru40 fl. from manual pr. aggressive avg. Crane Naval 286557 Du32 Ru40 fl. from manual pr. aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286557, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - aggressive sr, Completeness (tech) - Not required
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 284159 Du50 Ru40 threads. from manual pr. non-aggressive cf. Faucet Naval 284159 DN50 PN40 threads. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284159, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - non-aggressive, Complete set ( tech) - not required
Faucet Naval 284157 Du32 Ru40 threads. from manual pr. non-aggressive environment Crane Naval 284157 Du32 Ru40 carving. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284157, Nominal diameter, mm (des) - 32 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working environment (tek) - non-aggressive, Complete set ( tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required, Working environment (tek) - not aggressive, Completeness (tek) - not required
Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280509, Nominal passage, mm (dec) - 50 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - flanged (flanged), Type of drive (act) - with manual drive (with manual pr.), Electric drive brand (act) - not required, Working environment (act) - not aggressive, Completeness (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284403, Nominal diameter, mm (des) - 15 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Atlas Copco 91002740
Atlas Copco 90513252
Atlas Copco 91003276
Atlas Copco 91000661
Atlas Copco 90514647
Atlas Copco 91001875
Atlas Copco 92010667
Atlas Copco 90513203
Atlas Copco 90513392
Atlas Copco 91001997
2657546343 Atlas Copco Epiroc Genuine Original Spare parts Catalog
Maker: Siemens; Type: 1LA70962AA10-Z; 460V; 50-60 HZ; 2,55 KWT; 4.5A; 3480 rpm; PRO.TERM C
Atlas Copco 5750500741 1 EA
Atlas Copco 91000660 2 EA
Atlas Copco 91001951 8 EA
Atlas Copco 45102196 1 EA
Atlas Copco 45102195 1 EA
Atlas Copco 90513376 20 EA
Atlas Copco 91002696 2 EA
Atlas Copco 90514652 32 EA
Atlas Copco 90516257 19 EA
Atlas Copco 91001488 20 EA
Atlas Copco 91002025 16 EA
Atlas Copco 90513401 32 EA
Atlas Copco 91002026 16 EA
Atlas Copco 91002740 4 EA
Atlas Copco 90513252 32 EA
Atlas Copco 91003276 Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF, Type of product - Faucet, Manufacturer - Neval, Brand of pipeline fittings - 286556, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - with a set of counter flanges (with KOF)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali, Type of product - Crane, Manufacturer - Neval, Brand of pipeline fittings - 286406, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/ etc.), Type of drive - manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Full description
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285511, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (int) - 16 kgf/cm2, Type of connection to the pipeline (tek) - flanged (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - water, oil, complete set (tech) - not required
Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 284410, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284411, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with COF and liquid. Crane Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with KOF and cr, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285509, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tech) - water, oil, Complete set (tech) - with a set of counter flanges, fasteners (with KOF and cr.)
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 285506, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 235508, Nominal bore, mm - 40, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 286409, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive avg. Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive cf, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286405, Nominal passage, mm (dec) - 20.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (n / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment ( tek) - aggressive sr, Completeness (tek) - Not required
Faucet Naval 286557 Du32 Ru40 fl. from manual pr. aggressive avg. Crane Naval 286557 Du32 Ru40 fl. from manual pr. aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286557, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - aggressive sr, Completeness (tech) - Not required
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 284159 Du50 Ru40 threads. from manual pr. non-aggressive cf. Faucet Naval 284159 DN50 PN40 threads. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284159, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - non-aggressive, Complete set ( tech) - not required
Faucet Naval 284157 Du32 Ru40 threads. from manual pr. non-aggressive environment Crane Naval 284157 Du32 Ru40 carving. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284157, Nominal diameter, mm (des) - 32 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working environment (tek) - non-aggressive, Complete set ( tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required, Working environment (tek) - not aggressive, Completeness (tek) - not required
Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280509, Nominal passage, mm (dec) - 50 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - flanged (flanged), Type of drive (act) - with manual drive (with manual pr.), Electric drive brand (act) - not required, Working environment (act) - not aggressive, Completeness (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284403, Nominal diameter, mm (des) - 15 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Atlas Copco 91000661 2 EA
Atlas Copco 90514647 32 EA
Atlas Copco 91001875 1 EA
Atlas Copco 92010667 2 EA
Atlas Copco 90513203 64 EA
Atlas Copco 90513392 32 EA
Atlas Copco 91001997 1 EA
Maker: Siemens; Type: 1LA70962AA10-Z; 460V; 50-60 HZ; 2,55 KWT; 4.5A; 3480 rpm; PRO.TERM C
CRANE、Aloyco 、ELRO、KROMBACH、PSI、REVO、Triangle、W.T.A、Center Line、DEPA、Flowseal、Noz-Chek、Resistoflex、Saunders、Uni-Chek、Compac-Noz、Duo-Chek、Jenkins、ResistoPure、Stockham、XOMOX、Tufline、Pacific Valv
HOKE、GYROLOK、GO REGULATOR、DOPAK、TEXAS SAMPLIN
ATLAS COPCO 5750500741 INSERT
ATLAS COPCO 91000660 SADDLE, MAG, STEM-ABUTTED, -15
ATLAS COPCO 91001951
ATLAS COPCO 45102196 O-RING
ATLAS COPCO 45102195 SEAL CUP
ATLAS COPCO 90513376
ATLAS COPCO 91002696
ATLAS COPCO 90514652
ATLAS COPCO 90516257 PILOT ADAPTER
ATLAS COPCO 91001488 WASHER
ATLAS COPCO 91002025 CUTTER, RCC KERF 5R
ATLAS COPCO 90513401
ATLAS COPCO 91002026 CUTTER, RCC KERF 4R
ATLAS COPCO 91002740
ATLAS COPCO 90513252
ATLAS COPCO 91003276 PILOT BIT, 12 01/04 PRIMO83
ATLAS COPCO 91000661 SADDLE, MAG, INNER, 11 DEGREE
ATLAS COPCO 90514647
ATLAS COPCO 91001875
ATLAS COPCO 92010667 RAISEBORE STABILIZER 6RS 12.25
ATLAS COPCO 90513203
ATLAS COPCO 90513392
ATLAS COPCO 91001997=91003276
ATLAS COPCO 5750500741 INSERT
ATLAS COPCO 91000660 SADDLE, MAG, STEM-ABUTTED, -15
ATLAS COPCO 91001951
ATLAS COPCO 45102196 O-RING
ATLAS COPCO 45102195 SEAL CUP
ATLAS COPCO 90513376
ATLAS COPCO 91002696 Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF Faucet Neval 286556 Du25 Ru40 fl. from manual pr. water, air, acid, alkali with COF, Type of product - Faucet, Manufacturer - Neval, Brand of pipeline fittings - 286556, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - with a set of counter flanges (with KOF)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali Crane Neval 286406 Du25 Ru40 p/pr. from manual pr. water, air, acid, alkali, Type of product - Crane, Manufacturer - Neval, Brand of pipeline fittings - 286406, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/ etc.), Type of drive - manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, air, acid, alkali, Complete set - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Full description
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil Faucet Naval 285511 Du80 Ru16 fl. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285511, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (int) - 16 kgf/cm2, Type of connection to the pipeline (tek) - flanged (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - water, oil, complete set (tech) - not required
Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284410 Du65 Ru25 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 284410, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working medium (tech) - water, steam, oil products, Completeness (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil Crane Naval 284411 Du80 Ru25 p/pr. from manual pr. water, oil, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284411, Nominal diameter, mm (des) - 80 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281406 Du25 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281406, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with COF and liquid. Crane Naval 285509 Du50 Ru40 fl. from manual pr. water, oil with KOF and cr, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285509, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tech) - water, oil, Complete set (tech) - with a set of counter flanges, fasteners (with KOF and cr.)
Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 281507 Du32 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 281507, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 285506 Du25 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 285506, Nominal bore, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. water, oil, Type of product (tek) - Crane, Manufacturer (tek) - Naval, Brand of pipeline fittings (tek) - 284403, Nominal bore, mm (des) - 15,000 mm, Nominal pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - Not required, Operating environment (tek ) - water, oil, Completeness (tech) - Not required
Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid. Faucet Naval 235508 Du40 Ru40 fl. from manual pr. water, steam, petroleum products with COF and liquid, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 235508, Nominal bore, mm - 40, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 286409 Du50 Ru40 p/pr. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 286409, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - welded (p/c. ), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, petroleum products Crane Naval 281405 Du20 Ru40 p/pr. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 281405, Nominal passage, mm - 20, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive avg. Crane Naval 286405 Du20 Ru40 p/pr. from manual pr. aggressive cf, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286405, Nominal passage, mm (dec) - 20.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (n / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment ( tek) - aggressive sr, Completeness (tek) - Not required
Faucet Naval 286557 Du32 Ru40 fl. from manual pr. aggressive avg. Crane Naval 286557 Du32 Ru40 fl. from manual pr. aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 286557, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - flange (fl.), Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - aggressive sr, Completeness (tech) - Not required
Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and cr. Faucet Naval 235511 Du80 Ru16 fl. from manual pr. non-aggressive cf. with KOF and kr, Type of product (current) - Crane, Manufacturer (current) - Naval, Brand of pipeline fittings (current) - 235511, Nominal passage, mm (des) - 80.000 mm, Conditional pressure, kgf / cm2 (int) - 16 kgf / cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (act ) - non-aggressive (non-aggressive cf.), Completeness (current) - with mating flanges and fasteners (KOF, kr.)
Crane Naval 284159 Du50 Ru40 threads. from manual pr. non-aggressive cf. Faucet Naval 284159 DN50 PN40 threads. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284159, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working medium (tek) - non-aggressive, Complete set ( tech) - not required
Faucet Naval 284157 Du32 Ru40 threads. from manual pr. non-aggressive environment Crane Naval 284157 Du32 Ru40 carving. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284157, Nominal diameter, mm (des) - 32 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - threaded, Type of drive (tek) - with manual drive (with manual drive), Brand of electric drive (tek) - not required, Working environment (tek) - non-aggressive, Complete set ( tech) - not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Crane Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products Faucet Naval 285512 Du100 Ru16 fl. from manual pr. water, steam, oil products, Type of product - Faucet, Manufacturer - Naval, Brand of pipeline fittings - 285512, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, oil products, Completeness - Not required
Faucet Naval 280403 Du15 Ru40 fl. from manual pr. gas Crane Naval 280403 Du15 Ru40 fl. from manual pr. gas, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280403, Nominal bore, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flanged (fl.), Type of drive - manual drive (with manual drive), Brand of electric drive - Not required, Working medium - gas, Complete set - Not required
Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment Crane Naval 280405 Du20 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required, Working environment (tek) - not aggressive, Completeness (tek) - not required
Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment Faucet Naval 280509 Du50 Ru40 fl. from manual pr. non-aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 280509, Nominal passage, mm (dec) - 50 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - flanged (flanged), Type of drive (act) - with manual drive (with manual pr.), Electric drive brand (act) - not required, Working environment (act) - not aggressive, Completeness (tech) - not required
Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with COF, procl, crepe. Faucet Naval 285572 Du100 Ru25 fl. from manual pr. water, oil with KOF, prokl, crepe, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 285572, Nominal bore, mm (des) - 100 mm, Conditional pressure, kgf / cm2 (intelligent) - 25 kgf/cm2, Type of connection to the pipeline (act) - flanged (flan.), Type of drive (act) - with manual drive (with manual pr), Brand of electric drive (act) - not required, Working medium (tech) - water, oil, Complete set (tech) - with counter flanges, gaskets and fasteners (KOF, procl, crepe)
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive cf. Crane Naval 284407 Du32 Ru40 p/pr. from manual pr. non-aggressive medium, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284407, Nominal diameter, mm (des) - 32,000 mm, Conditional pressure, kgf/cm2 (int) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating environment ( tek) - non-aggressive medium, Completeness (tek) - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr Crane Naval 284403 Du15 Ru40 p/pr. from manual pr. aggressive sr, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284403, Nominal diameter, mm (des) - 15 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas Crane Naval 284405 Du20 Ru40 p/pr. from manual pr. water, oil, gas, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284405, Nominal diameter, mm (des) - 20 mm, Conditional pressure, kgf/cm2 (int. ) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - Not required, Working environment (tech) - water, oil, gas, Completeness (tech) - Not required
Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water Crane Naval 284409 Du50 Ru40 p/pr. from manual pr. water, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284409, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf / cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - with manual drive (tek), Brand of electric drive (tek) - not required, Operating medium (tek) - water, complete set (tech) - not required
Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products Faucet Naval 280402 Du10 Ru40 fl. from manual pr. water, steam, petroleum products, Type of product - Crane, Manufacturer - Naval, Brand of pipeline fittings - 280402, Nominal bore, mm - 10, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, oil products, Complete set - Not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment Crane Naval 284402 Du10 Ru40 p/pr. from manual pr. aggressive environment, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 284402, Nominal diameter, mm (des) - 10 mm, Conditional pressure, kgf/cm2 ( whole) - 40 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/pr.), Type of drive (tek) - manual drive (tek), Brand of electric drive (tek) - not required , Working medium (tech) - aggressive liquid medium, Complete set (tech) - not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive medium Crane Naval 286403 Du15 Ru40 p/pr. from manual pr. liquid aggressive environment, Type of product (tech) - Crane, Manufacturer (tech) - Naval, Brand of pipeline fittings (tech) - 268403, Nominal passage, mm (des) - 15.000 mm, Conditional pressure, kgf / cm2 (int) - 40 kgf / cm2, Type of connection to the pipeline (act) - for welding (p / pr.), Type of drive (act) - with manual drive (with manual pr.), Brand of electric drive (act) - not required, Working environment (tek) - aggressive liquid medium, Completeness (tek) - Not required
ATLAS COPCO 90514652
ATLAS COPCO 90516257 PILOT ADAPTER
ATLAS COPCO 91001488 WASHER
ATLAS COPCO 91002025 CUTTER, RCC KERF 5R
ATLAS COPCO 90513401
ATLAS COPCO 91002026 CUTTER, RCC KERF 4R
ATLAS COPCO 91002740
ATLAS COPCO 90513252
ATLAS COPCO 91003276 PILOT BIT, 12 01/04 PRIMO83
ATLAS COPCO 91000661 SADDLE, MAG, INNER, 11 DEGREE
ATLAS COPCO 90514647
ATLAS COPCO 91001875
ATLAS COPCO 92010667 RAISEBORE STABILIZER 6RS 12.25
ATLAS COPCO 90513203
ATLAS COPCO 90513392
ATLAS COPCO 91001997=91003276
ATLAS COPCO 5750500741 INSERT
ATLAS COPCO 91000660 SADDLE, MAG, STEM-ABUTTED, -15
ATLAS COPCO 91001951
ATLAS COPCO 45102196 O-RING
ATLAS COPCO 45102195 SEAL CUP
ATLAS COPCO 90513376
ATLAS COPCO 91002696
ATLAS COPCO 90514652
ATLAS COPCO 90516257 PILOT ADAPTER
ATLAS COPCO 91001488 WASHER
ATLAS COPCO 91002025 CUTTER, RCC KERF 5R
ATLAS COPCO 90513401
ATLAS COPCO 91002026 CUTTER, RCC KERF 4R
ATLAS COPCO 91002740
ATLAS COPCO 90513252
ATLAS COPCO 91003276 PILOT BIT, 12 01/04 PRIMO83
ATLAS COPCO 91000661 SADDLE, MAG, INNER, 11 DEGREE
ATLAS COPCO 90514647
ATLAS COPCO 91001875
ATLAS COPCO 92010667 RAISEBORE STABILIZER 6RS 12.25
ATLAS COPCO 90513203
ATLAS COPCO 90513392
ATLAS COPCO 91001997=91003276
ATLAS COPCO 5750500741 INSERT
ATLAS COPCO 91000660 SADDLE, MAG, STEM-ABUTTED, -15
ATLAS COPCO 91001951
ATLAS COPCO 45102196 O-RING
ATLAS COPCO 45102195 SEAL CUP
ATLAS COPCO 90513376
ATLAS COPCO 91002696
ATLAS COPCO 90514652
ATLAS COPCO 90516257 PILOT ADAPTER
ATLAS COPCO 91001488 WASHER
ATLAS COPCO 91002025 CUTTER, RCC KERF 5R
ATLAS COPCO 90513401
ATLAS COPCO 91002026 CUTTER, RCC KERF 4R
ATLAS COPCO 91002740
ATLAS COPCO 90513252
ATLAS COPCO 91003276 PILOT BIT, 12 01/04 PRIMO83
ATLAS COPCO 91000661 SADDLE, MAG, INNER, 11 DEGREE
ATLAS COPCO 90514647
ATLAS COPCO 91001875
ATLAS COPCO 92010667 RAISEBORE STABILIZER 6RS 12.25
ATLAS COPCO 90513203
ATLAS COPCO 90513392
ATLAS COPCO 91001997=91003276
CIRCOR、Leslie Controls、R.G Laurence、Nicholson、Spence、CPC-Cryolab、Rockwood Swendeman .
DCS 150-8E
DCS 300-4E
DCS 8-350E
DCS 12-250E
DCS 20-150E
DCS 40-75E
DCS 55-55E Georg Fischer 225 721700020法兰 Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰Georg Fischer 225 721700020法兰
DCS 60-50E
DCS 80-37E
DCS 150-20E
DCS 60-20E
DCS 80-15E
DCS 100-12E
DCS 150-8E
1 Seal 319311 pos.225 ARCA Regler 2 PC
2 Seal 319311 pos. 143 ARCA Regler 2 PC
3 Bearing 319311 pos. 164 ARCA Regler 2 PC
4 Set 319311 pos. 171 ARCA Regler 2 PC
5 Seal 319311 pos.180 ARCA Regler 2 PC
6 Ring 319311 pos.183 ARCA Regler 2 PC
7 Seal 319311 pos.184 ARCA Regler 2 PC
8 Seal 319314 pos.143 ARCA Regler 2 PC
9 Kit 319314 pos. 156 ARCA Regler 2 PC
10 Bearing 319314 pos. 164 ARCA Regler 2 PC
11 Set 319314 pos. 171 ARCA Regler 2 PC
12 Seal 319314 pos.180 ARCA Regler 2 PC
13 Ring 319314 pos.183 ARCA Regler 2 PC
14 Seal 319314 pos.184 ARCA Regler 2 PC
15 Seal 319314 pos.225 ARCA Regler 2 PC
16 Ring 319314 pos.243 ARCA Regler 2 PC
17 Ring 319311 pos.243 ARCA Regler 2 PC
18 Set 319311 pos. 156 ARCA Regler 2 PC
19 Plunger 27A3998X072 Emerson 1 PC
20 Ring 319314 pos.199 ARCA Regler 2 PC
21 Ring 319311 pos. 117 ARCA Regler 2 PC
22 Seal 319314 pos. 198 ARCA Regler 2 PC
23 Ring 319314 pos.117 ARCA Regler 2 PC
DCS 300-4E
DCS 8-350E
DCS 12-250E
D偌草盘悼S 20-150E
DCS 40-75E
DCS 55-55E
DCS 60-50E
DCS 80-37E
DCS 150-20E
Ballomax crane KShT 60.102.020 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.020 Du20 Ru40 for heat supply systems
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Ballomax crane KShT 60.102.032 Ball valve from alloy steel with manual drive for welding Ballomax KSHT 60.102.032 Du32 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.025.A.40, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - under welding (p/pr.), Type of drive - with manual drive (with manual pr.), Brand of electric drive - not required, Working medium - coolants, refrigerants, Complete set - not required
Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water, Complete set (tech) - with handle, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.200.A.25, Nominal diameter, mm (des) - 200,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tech) - welding (p/c), Type of drive (tech) - with manual drive (with manual pr.), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane BROEN KShT 61.102.400.R.25 Du400 Ru25 p/pr. with ed. water Crane BROEN KShT 61.102.400.R.25 Du400 Ru25 p/pr. with ed. water, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.400.R.25, Nominal diameter, mm (des) - 400 mm, Pressure conditional, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (technical) - welded (p/c), Type of drive (technical) - with gearbox (ed.), Brand of electric drive (technical) - Not required, Working medium (tech) - water, Complete set (tech) - with mechanical gearbox
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Ballomax crane KShT 60.102.032 Ball valve from alloy steel with manual drive for welding Ballomax KSHT 60.102.032 Du32 Ru40 for heat supply systems
Ballomax crane KShT 60.102.020 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.020 Du20 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.025.A.40, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - under welding (p/pr.), Type of drive - with manual drive (with manual pr.), Brand of electric drive - not required, Working medium - coolants, refrigerants, Complete set - not required
Crane KShT 60.102.065.A.25 Du65 Ru25 p/pr. from manual pr. water Crane KShT 60.102.065.A.25 Du65 Ru25 p/pr. from manual pr. water, Complete set (tech) - not required, Type of product (tech) - Crane, Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 60.102.065.A.25, Nominal diameter, mm (des) - 65,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (current) - welded (p/pr.), Type of drive (current) - with manual drive (with manual pr. ), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane BROEN KShT 61.102.300.R.25 Du300 Ru25 p/pr. with ed. water Crane BROEN KShT 61.102.300.R.25 Du300 Ru25 p/pr. with ed. water, Type of product (tech) - Crane, Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.300.R.25, Nominal diameter, mm (des) - 300 mm, Conditional pressure, kgf/ cm2 (whole) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/c), Type of drive (tek) - with gearbox (ed.), Brand of electric drive (tek) - Not required, Working medium (tech) – water, complete set (tech) - with mechanical gearbox
Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water, Complete set (tech) - with handle, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.200.A.25, Nominal diameter, mm (des) - 200,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tech) - welding (p/c), Type of drive (tech) - with manual drive (with manual pr.), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 61.102.150.A.25, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.101.050.A.40 Du50 Ru40 thread/welding with handle. water, steam Crane Broen Ballomax KShT 60.101.050.A.40 Du50 Ru40 thread/welding with handle. water, steam, Type of product (tek) - Ball valve (Valve), Manufacturer (tek) - Broen, Brand of pipeline fittings (tek) - Ballomax KShT 60.101.050.A.40, Nominal diameter, mm (des) - 50.000 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (technical) - thread/welding, Type of drive (technical) - with manual drive (with manual drive), Brand of electric drive (current ) - not required, Working medium (tech) - water, steam (water, steam), Completeness (tech) - not required
Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.002.065, Nominal passage, mm - 65, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Full description
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.100.A.25, Nominal bore, mm - 100, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded( p/pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 61.102.150.A.25, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - not required, Brand of pipeline fittings - KShT 61.103.200, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHH 32.16.01.02, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - aggressive liquid medium, Complete set - with a set of counter flanges (with KOF)
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with KOF and kr., Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 12.050.025, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange ( fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - liquid, Completeness - with a set of mating flanges, fasteners (with KOF and kr.)
Tap KSh.Ts.F.200.016.P/P.02 Du200 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.200.016.P/P.02 Du200 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.200.016.P/P.02, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 16, Type connection to the pipeline - flange (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, Complete set - Not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr. Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 61.102.010A.40 Du10 Ru40 p/pr. from manual pr. non-aggressive environment Crane KShT 61.102.010A.40 Du10 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Ball valve, Manufacturer (tech) - Broen, Brand of pipeline fittings (tech) - KSHT 61.102.010A.40, Nominal bore, mm (dec) - 10 mm, Conditional pressure, kgf/ cm2 (intelligent) - 40 kgf/cm2, Type of connection to the pipeline (tech) - for welding (p / pr.), Type of drive (tech) - with manual drive (with manual pr.), Brand of electric drive (tech) - Not required, Operating environment (current) - non-aggressive environment, Completeness (current) - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - not required, Brand of pipeline fittings - KShT 61.103.200, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.150, Nominal bore, mm - 150, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 60.102.250 Du250 Ru25 Ballomax Crane KShT 60.102.250 Du250 Ru25 Ballomax. Flange with a set of counter flanges (with KOF)
Tap KSh.Ts.F.300.016.P/P.02 Du300 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.300.016.P/P.02 Du300 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.300.016.P/P.02, Nominal diameter, mm - 300, Nominal pressure, kgf/cm2 - 16, Type connection to the pipeline - flanged (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, Complete set - with a set of counter flanges (with KOF)
Tap KSh.Ts.F.400.016.P/P.02 Du400 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.400.016.P/P.02 Du400 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.400.016.P / P.02, Nominal passage, mm - 400, Conditional pressure, kgf / cm2 - 16, Type connections to the pipeline - flanged (fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr. Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 60.103.100, Nominal diameter, mm - 100, Nominal pressure, kgf/cm2 - 25 Type of connection to the pipeline - flange (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.150, Nominal bore, mm - 150, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KSh.Z.050.016.03.F Flange valve KSh.Z.050.016.03.F Du50 Ru16 F316M metal/metal handle with a set of flanges NZh 1-50x16 thief. with fastening 16x80nzh gasket SNP
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.150, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - with KOF
Crane KShT 61.103.250 Du250 Ru16 Ballomax flanged with KOF Crane KShT 61.103.250 Du250 Ru16 Ballomax flanged with KOF
Full description
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane KShT 61.103.300.R.16 Du300 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 61.103.300.R.16 Du300 Ru16 fl. from manual pr. liquid with KOF and liquid, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 61.103.300.R.16, Nominal diameter, mm - 300, Nominal pressure, kgf/cm2 - 16, Type of connection to pipeline - flanged (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 60.103.065 Du65 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 60.103.065 Du65 Ru16 fl. from manual pr. liquid with KOF and liquid, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 60.103.065, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.100.A.25, Nominal bore, mm - 100, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded( p/pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with KOF and kr., Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 12.050.025, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange ( fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - liquid, Completeness - with a set of mating flanges, fasteners (with KOF and kr.)
Full description
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHH 32.16.01.02, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - aggressive liquid medium, Complete set - with a set of counter flanges (with KOF)
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHH 32.16.01.02, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - aggressive liquid medium, Complete set - with a set of counter flanges (with KOF)
Temper tap 28320015 Du15 Ru40 fl. from manual pr. Heating water with COF, etc. Temper tap 28320015 Du15 Ru40 fl. from manual pr. heating water with COF and cr., etc., Type of product - Faucet, Manufacturer - Temper, Brand of pipeline fittings - 28320015, Nominal diameter, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - heating water, Complete set - with a set of counter flanges, fasteners and gaskets (with KOF, etc.)
Ball valve 050.016.02 Du50 Ru16 p/pr. with manual handle, water, steam Ball valve 050.016.02 Du50 Ru16 p/pr. with manual pr, water, steam, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Not required, Brand of pipeline fittings (tech) - 050.016.02, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 16 kgf/cm2, Type of connection to the pipeline (current) - welded (p/pr.), Type of drive (current) - with manual drive (with manual pr.) , Electric drive brand (tek) - Not required, Working medium (tek) - water, steam, Completeness (tek) - Not required
Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.002.065, Nominal passage, mm - 65, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Emerson 1B30035G01
Emerson 1X00786G01
Emerson 1X00788G01
Emerson 5A26137G14
Emerson 5X00585G03 Masoneilan 4000 I/P Converter Module 055100-212-888
横河 ALE 111 通信模块 ALE 111
Relpol MRI-32/24VDC/relpol 端子面板 MRI-32/24VDC/relpol
Moxa PT-7828-R-24 MOXA 24 端口交换机
艾默生 05D0083G01 电源 05D0083G01
艾默生5X00106G01“CPU模拟量输入模块
HART 协议 5X00106G01"
艾默生 5X00109G01“CPU 输入模块
带 HART 协议的模拟量输入 5X00109G01"
艾默生1C31233G01“CPU接点输入模块
电源=24V 1C31233G01”
艾默生1C31238H01“CPU输入模块
与源接触输入
电源=24V 1C31238H01"
艾默生1C31122G01“CPU数字量输出模块
信号电平高达 60V 1C31122G01"
艾默生1C31125G01“CPU模块输入模块
带电平的离散输出
信号高达 60V 1C31125G01"
艾默生1C31166G01“CPU通讯模块
适用于机柜 1C31166G01"
艾默生1C31169G02“CPU模块输入模块
机柜通讯 1C31169G02"
Ballomax crane KShT 60.102.020 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.020 Du20 Ru40 for heat supply systems
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Ballomax crane KShT 60.102.032 Ball valve from alloy steel with manual drive for welding Ballomax KSHT 60.102.032 Du32 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.025.A.40, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - under welding (p/pr.), Type of drive - with manual drive (with manual pr.), Brand of electric drive - not required, Working medium - coolants, refrigerants, Complete set - not required
Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water, Complete set (tech) - with handle, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.200.A.25, Nominal diameter, mm (des) - 200,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tech) - welding (p/c), Type of drive (tech) - with manual drive (with manual pr.), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane BROEN KShT 61.102.400.R.25 Du400 Ru25 p/pr. with ed. water Crane BROEN KShT 61.102.400.R.25 Du400 Ru25 p/pr. with ed. water, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.400.R.25, Nominal diameter, mm (des) - 400 mm, Pressure conditional, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (technical) - welded (p/c), Type of drive (technical) - with gearbox (ed.), Brand of electric drive (technical) - Not required, Working medium (tech) - water, Complete set (tech) - with mechanical gearbox
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Ballomax crane KShT 60.102.032 Ball valve from alloy steel with manual drive for welding Ballomax KSHT 60.102.032 Du32 Ru40 for heat supply systems
Ballomax crane KShT 60.102.020 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.020 Du20 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.025.A.40, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - under welding (p/pr.), Type of drive - with manual drive (with manual pr.), Brand of electric drive - not required, Working medium - coolants, refrigerants, Complete set - not required
Crane KShT 60.102.065.A.25 Du65 Ru25 p/pr. from manual pr. water Crane KShT 60.102.065.A.25 Du65 Ru25 p/pr. from manual pr. water, Complete set (tech) - not required, Type of product (tech) - Crane, Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 60.102.065.A.25, Nominal diameter, mm (des) - 65,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (current) - welded (p/pr.), Type of drive (current) - with manual drive (with manual pr. ), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane BROEN KShT 61.102.300.R.25 Du300 Ru25 p/pr. with ed. water Crane BROEN KShT 61.102.300.R.25 Du300 Ru25 p/pr. with ed. water, Type of product (tech) - Crane, Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.300.R.25, Nominal diameter, mm (des) - 300 mm, Conditional pressure, kgf/ cm2 (whole) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/c), Type of drive (tek) - with gearbox (ed.), Brand of electric drive (tek) - Not required, Working medium (tech) – water, complete set (tech) - with mechanical gearbox
Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water, Complete set (tech) - with handle, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.200.A.25, Nominal diameter, mm (des) - 200,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tech) - welding (p/c), Type of drive (tech) - with manual drive (with manual pr.), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 61.102.150.A.25, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.101.050.A.40 Du50 Ru40 thread/welding with handle. water, steam Crane Broen Ballomax KShT 60.101.050.A.40 Du50 Ru40 thread/welding with handle. water, steam, Type of product (tek) - Ball valve (Valve), Manufacturer (tek) - Broen, Brand of pipeline fittings (tek) - Ballomax KShT 60.101.050.A.40, Nominal diameter, mm (des) - 50.000 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (technical) - thread/welding, Type of drive (technical) - with manual drive (with manual drive), Brand of electric drive (current ) - not required, Working medium (tech) - water, steam (water, steam), Completeness (tech) - not required
Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.002.065, Nominal passage, mm - 65, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Full description
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.100.A.25, Nominal bore, mm - 100, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded( p/pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 61.102.150.A.25, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - not required, Brand of pipeline fittings - KShT 61.103.200, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHH 32.16.01.02, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - aggressive liquid medium, Complete set - with a set of counter flanges (with KOF)
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with KOF and kr., Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 12.050.025, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange ( fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - liquid, Completeness - with a set of mating flanges, fasteners (with KOF and kr.)
Tap KSh.Ts.F.200.016.P/P.02 Du200 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.200.016.P/P.02 Du200 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.200.016.P/P.02, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 16, Type connection to the pipeline - flange (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, Complete set - Not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr. Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 61.102.010A.40 Du10 Ru40 p/pr. from manual pr. non-aggressive environment Crane KShT 61.102.010A.40 Du10 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Ball valve, Manufacturer (tech) - Broen, Brand of pipeline fittings (tech) - KSHT 61.102.010A.40, Nominal bore, mm (dec) - 10 mm, Conditional pressure, kgf/ cm2 (intelligent) - 40 kgf/cm2, Type of connection to the pipeline (tech) - for welding (p / pr.), Type of drive (tech) - with manual drive (with manual pr.), Brand of electric drive (tech) - Not required, Operating environment (current) - non-aggressive environment, Completeness (current) - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - not required, Brand of pipeline fittings - KShT 61.103.200, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.150, Nominal bore, mm - 150, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 60.102.250 Du250 Ru25 Ballomax Crane KShT 60.102.250 Du250 Ru25 Ballomax. Flange with a set of counter flanges (with KOF)
Tap KSh.Ts.F.300.016.P/P.02 Du300 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.300.016.P/P.02 Du300 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.300.016.P/P.02, Nominal diameter, mm - 300, Nominal pressure, kgf/cm2 - 16, Type connection to the pipeline - flanged (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, Complete set - with a set of counter flanges (with KOF)
Tap KSh.Ts.F.400.016.P/P.02 Du400 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.400.016.P/P.02 Du400 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.400.016.P / P.02, Nominal passage, mm - 400, Conditional pressure, kgf / cm2 - 16, Type connections to the pipeline - flanged (fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr. Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 60.103.100, Nominal diameter, mm - 100, Nominal pressure, kgf/cm2 - 25 Type of connection to the pipeline - flange (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.150, Nominal bore, mm - 150, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KSh.Z.050.016.03.F Flange valve KSh.Z.050.016.03.F Du50 Ru16 F316M metal/metal handle with a set of flanges NZh 1-50x16 thief. with fastening 16x80nzh gasket SNP
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.150, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - with KOF
Crane KShT 61.103.250 Du250 Ru16 Ballomax flanged with KOF Crane KShT 61.103.250 Du250 Ru16 Ballomax flanged with KOF
Full description
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane KShT 61.103.300.R.16 Du300 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 61.103.300.R.16 Du300 Ru16 fl. from manual pr. liquid with KOF and liquid, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 61.103.300.R.16, Nominal diameter, mm - 300, Nominal pressure, kgf/cm2 - 16, Type of connection to pipeline - flanged (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 60.103.065 Du65 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 60.103.065 Du65 Ru16 fl. from manual pr. liquid with KOF and liquid, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 60.103.065, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.100.A.25, Nominal bore, mm - 100, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded( p/pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with KOF and kr., Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 12.050.025, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange ( fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - liquid, Completeness - with a set of mating flanges, fasteners (with KOF and kr.)
Full description
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHH 32.16.01.02, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - aggressive liquid medium, Complete set - with a set of counter flanges (with KOF)
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHH 32.16.01.02, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - aggressive liquid medium, Complete set - with a set of counter flanges (with KOF)
Temper tap 28320015 Du15 Ru40 fl. from manual pr. Heating water with COF, etc. Temper tap 28320015 Du15 Ru40 fl. from manual pr. heating water with COF and cr., etc., Type of product - Faucet, Manufacturer - Temper, Brand of pipeline fittings - 28320015, Nominal diameter, mm - 15, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - heating water, Complete set - with a set of counter flanges, fasteners and gaskets (with KOF, etc.)
Ball valve 050.016.02 Du50 Ru16 p/pr. with manual handle, water, steam Ball valve 050.016.02 Du50 Ru16 p/pr. with manual pr, water, steam, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - Not required, Brand of pipeline fittings (tech) - 050.016.02, Nominal diameter, mm (des) - 50 mm, Conditional pressure, kgf/cm2 (integer) - 16 kgf/cm2, Type of connection to the pipeline (current) - welded (p/pr.), Type of drive (current) - with manual drive (with manual pr.) , Electric drive brand (tek) - Not required, Working medium (tek) - water, steam, Completeness (tek) - Not required
Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.002.065, Nominal passage, mm - 65, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
艾默生 5X00247G01 CPU OCR400 5X00247G01
艾默生 1B30035G01 模块插槽 1B30035G01
艾默生 1X00786G01 右分支终端器 1X00786G01
艾默生 1X00788G01 左分支终端器 1X00788G01
艾默生 5A26137G14“从 PDM 面板到
控制器 5A26137G14"
Ballomax crane KShT 60.102.020 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.020 Du20 Ru40 for heat supply systems
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Ballomax crane KShT 60.102.032 Ball valve from alloy steel with manual drive for welding Ballomax KSHT 60.102.032 Du32 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.025.A.40, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - under welding (p/pr.), Type of drive - with manual drive (with manual pr.), Brand of electric drive - not required, Working medium - coolants, refrigerants, Complete set - not required
Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water, Complete set (tech) - with handle, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.200.A.25, Nominal diameter, mm (des) - 200,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tech) - welding (p/c), Type of drive (tech) - with manual drive (with manual pr.), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane BROEN KShT 61.102.400.R.25 Du400 Ru25 p/pr. with ed. water Crane BROEN KShT 61.102.400.R.25 Du400 Ru25 p/pr. with ed. water, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.400.R.25, Nominal diameter, mm (des) - 400 mm, Pressure conditional, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (technical) - welded (p/c), Type of drive (technical) - with gearbox (ed.), Brand of electric drive (technical) - Not required, Working medium (tech) - water, Complete set (tech) - with mechanical gearbox
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Ballomax crane KShT 60.102.015 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.015 Du15 Ru40 for heat supply systems
Ballomax crane KShT 60.102.032 Ball valve from alloy steel with manual drive for welding Ballomax KSHT 60.102.032 Du32 Ru40 for heat supply systems
Ballomax crane KShT 60.102.020 Ball valve made of alloy steel with manual drive for welding Ballomax KShT 60.102.020 Du20 Ru40 for heat supply systems
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants Crane Broen Ballomax KShT 60.102.025.A.40 Du25 Ru40 p/pr. from manual pr. coolants, refrigerants, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.025.A.40, Nominal diameter, mm - 25, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - under welding (p/pr.), Type of drive - with manual drive (with manual pr.), Brand of electric drive - not required, Working medium - coolants, refrigerants, Complete set - not required
Crane KShT 60.102.065.A.25 Du65 Ru25 p/pr. from manual pr. water Crane KShT 60.102.065.A.25 Du65 Ru25 p/pr. from manual pr. water, Complete set (tech) - not required, Type of product (tech) - Crane, Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 60.102.065.A.25, Nominal diameter, mm (des) - 65,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (current) - welded (p/pr.), Type of drive (current) - with manual drive (with manual pr. ), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane BROEN KShT 61.102.300.R.25 Du300 Ru25 p/pr. with ed. water Crane BROEN KShT 61.102.300.R.25 Du300 Ru25 p/pr. with ed. water, Type of product (tech) - Crane, Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.300.R.25, Nominal diameter, mm (des) - 300 mm, Conditional pressure, kgf/ cm2 (whole) - 25 kgf/cm2, Type of connection to the pipeline (tek) - welded (p/c), Type of drive (tek) - with gearbox (ed.), Brand of electric drive (tek) - Not required, Working medium (tech) – water, complete set (tech) - with mechanical gearbox
Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water Crane BROEN KShT 61.102.200.A.25 Du200 Ru25 p/pr. from manual pr. water, Complete set (tech) - with handle, Type of product (tech) - Ball valve (Valve), Manufacturer (tech) - BROEN, Brand of pipeline fittings (tech) - KShT 61.102.200.A.25, Nominal diameter, mm (des) - 200,000 mm, Conditional pressure, kgf/cm2 (integer) - 25 kgf/cm2, Type of connection to the pipeline (tech) - welding (p/c), Type of drive (tech) - with manual drive (with manual pr.), Electric drive brand (tek) - Not required, Working medium (tek) - water
Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 61.102.150.A.25, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.101.050.A.40 Du50 Ru40 thread/welding with handle. water, steam Crane Broen Ballomax KShT 60.101.050.A.40 Du50 Ru40 thread/welding with handle. water, steam, Type of product (tek) - Ball valve (Valve), Manufacturer (tek) - Broen, Brand of pipeline fittings (tek) - Ballomax KShT 60.101.050.A.40, Nominal diameter, mm (des) - 50.000 mm, Conditional pressure, kgf/cm2 (integer) - 40 kgf/cm2, Type of connection to the pipeline (technical) - thread/welding, Type of drive (technical) - with manual drive (with manual drive), Brand of electric drive (current ) - not required, Working medium (tech) - water, steam (water, steam), Completeness (tech) - not required
Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.002.065 Du65 Ru16 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.002.065, Nominal passage, mm - 65, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Full description
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.100.A.25, Nominal bore, mm - 100, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded( p/pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 61.102.150.A.25 Du150 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 61.102.150.A.25, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - not required, Brand of pipeline fittings - KShT 61.103.200, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with COF Crane KSHH 32.16.01.02 Du32 Ru16 fl. from manual pr. aggressive liquid medium with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHH 32.16.01.02, Nominal bore, mm - 32, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange (fl .), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - aggressive liquid medium, Complete set - with a set of counter flanges (with KOF)
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with KOF and kr., Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 12.050.025, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange ( fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - liquid, Completeness - with a set of mating flanges, fasteners (with KOF and kr.)
Tap KSh.Ts.F.200.016.P/P.02 Du200 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.200.016.P/P.02 Du200 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.200.016.P/P.02, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 16, Type connection to the pipeline - flange (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, Complete set - Not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr. Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 61.102.010A.40 Du10 Ru40 p/pr. from manual pr. non-aggressive environment Crane KShT 61.102.010A.40 Du10 Ru40 p/pr. from manual pr. non-aggressive environment, Type of product (tech) - Ball valve, Manufacturer (tech) - Broen, Brand of pipeline fittings (tech) - KSHT 61.102.010A.40, Nominal bore, mm (dec) - 10 mm, Conditional pressure, kgf/ cm2 (intelligent) - 40 kgf/cm2, Type of connection to the pipeline (tech) - for welding (p / pr.), Type of drive (tech) - with manual drive (with manual pr.), Brand of electric drive (tech) - Not required, Operating environment (current) - non-aggressive environment, Completeness (current) - not required
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water Crane KShT 61.103.200 Du200 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - not required, Brand of pipeline fittings - KShT 61.103.200, Nominal bore, mm - 200, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.150, Nominal bore, mm - 150, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges (with KOF)
Crane KShT 60.102.250 Du250 Ru25 Ballomax Crane KShT 60.102.250 Du250 Ru25 Ballomax. Flange with a set of counter flanges (with KOF)
Tap KSh.Ts.F.300.016.P/P.02 Du300 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.300.016.P/P.02 Du300 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.300.016.P/P.02, Nominal diameter, mm - 300, Nominal pressure, kgf/cm2 - 16, Type connection to the pipeline - flanged (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - water, steam, Complete set - with a set of counter flanges (with KOF)
Tap KSh.Ts.F.400.016.P/P.02 Du400 Ru16 fl. from manual pr. water, steam Tap KSh.Ts.F.400.016.P/P.02 Du400 Ru16 fl. from manual pr. water, steam, Type of product - Faucet, Manufacturer - Not required, Brand of pipeline fittings - KSh.Ts.F.400.016.P / P.02, Nominal passage, mm - 400, Conditional pressure, kgf / cm2 - 16, Type connections to the pipeline - flanged (fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - water, steam, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and cr. Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water with COF and water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal bore, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 60.103.100, Nominal diameter, mm - 100, Nominal pressure, kgf/cm2 - 25 Type of connection to the pipeline - flange (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.150, Nominal bore, mm - 150, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.080 Du80 Ru40 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.080, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane KSh.Z.050.016.03.F Flange valve KSh.Z.050.016.03.F Du50 Ru16 F316M metal/metal handle with a set of flanges NZh 1-50x16 thief. with fastening 16x80nzh gasket SNP
Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with COF Crane KShT 60.103.100 Du100 Ru16 fl. from manual pr. liquid with KOF, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 60.103.100, Nominal passage, mm - 100, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange (fl.) , Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Completeness - with a set of mating flanges (with KOF)
Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.150 Du150 Ru25 fl. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.103.150, Nominal passage, mm - 150, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - flanged (fl.), View drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - with KOF
Crane KShT 61.103.250 Du250 Ru16 Ballomax flanged with KOF Crane KShT 61.103.250 Du250 Ru16 Ballomax flanged with KOF
Full description
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane KShT 61.103.300.R.16 Du300 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 61.103.300.R.16 Du300 Ru16 fl. from manual pr. liquid with KOF and liquid, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 61.103.300.R.16, Nominal diameter, mm - 300, Nominal pressure, kgf/cm2 - 16, Type of connection to pipeline - flanged (fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane KShT 60.103.065 Du65 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 60.103.065 Du65 Ru16 fl. from manual pr. liquid with KOF and liquid, Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KShT 60.103.065, Nominal bore, mm - 65, Nominal pressure, kgf/cm2 - 16, Type of connection to the pipeline - flange( fl.), Type of drive - with manual drive (with manual drive), Brand of electric drive - Not required, Working medium - liquid, Complete set - with a set of counter flanges, fasteners (with KOF and cr.)
Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water Crane Broen Ballomax KShT 60.103.050 Du50 Ru40 fl. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.103.050, Nominal diameter, mm - 50, Nominal pressure, kgf/cm2 - 40, Type of connection to the pipeline - flange (fl.), Type drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.050 Du50 Ru40 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.050, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 40, Type of connection to the pipeline - for welding (p / pr. ), Drive type - with manual drive (with manual drive), Electric drive brand - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.080.A.25 Du80 Ru25 p/pr. from manual pr. water, Type of product - Faucet, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KSHT 60.102.080.A.25, Nominal passage, mm - 80, Conditional pressure, kgf / cm2 - 25, Type of connection to the pipeline - for welding ( p / pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Completeness - not required
Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water Crane Broen Ballomax KShT 60.102.100.A.25 Du100 Ru25 p/pr. from manual pr. water, Type of product - Crane, Manufacturer - Broen Ballomax, Brand of pipeline fittings - KShT 60.102.100.A.25, Nominal bore, mm - 100, Nominal pressure, kgf/cm2 - 25, Type of connection to the pipeline - welded( p/pr.), Type of drive - with manual drive (with manual drive), Brand of electric drive - not required, Working medium - water, Complete set - not required
Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with COF and liquid Crane KShT 12.050.025 Du50 Ru16 fl. from manual pr. liquid with KOF and kr., Type of product - Crane, Manufacturer - Not required, Brand of pipeline fittings - KSHT 12.050.025, Nominal passage, mm - 50, Conditional pressure, kgf / cm2 - 16, Type of connection to the pipeline - flange ( fl.), Drive type - with manual drive (with manual drive), Electric drive brand - Not required, Working medium - liquid, Completeness - with a set of mating flanges, fasteners (with KOF and kr.)
MES20-6-1P2018 Voith
740048 ACTUATOR HEAD:V3000-1 5 EA 1 49.53 Q*0206
740099 ACTUATOR:ROBERT SHAW,MP5413 5 EA 1 217.35 90207
670820 ADAPTER:CLEANOUT,PVC,DWV,SCH 40, 1-1/2" 0 EA 1 0.41 90507
670821 ADAPTER:CLEANOUT,PVC,DWV,SCH 40, 2" 52 EA 1 0.82 90409
671066 ADAPTER:COPPER SWEAT, 1 1/2" X MPT 1 EA 1 19.47 M*0205
671062 ADAPTER:COPPER SWEAT, 1 1/4" X FPT 3 EA 1 3.22 80607
670756 ADAPTER:COPPER SWEAT, 1/2" X1/2"FPT 2 EA 1 0.92 M*0105
670760 ADAPTER:COPPER SWEAT, 1/2"ID X1/2MPT 30 EA 1 0.93 M*0303
670765 ADAPTER:COPPER SWEAT, 1/2"ID X3/4"MPT 4 EA 1 2.66 60606
670754 ADAPTER:COPPER SWEAT, 1"ID X1"FPT 1 EA 1 3.69 M*0205
670764 ADAPTER:COPPER SWEAT, 1"ID X1"MPT 0 EA 1 3.68 M*0103
671064 ADAPTER:COPPER SWEAT, 2" X FPT 7 EA 1 6.12 80606
671067 ADAPTER:COPPER SWEAT, 2" X MPT 0 EA 1 11.72 M*0205
670757 ADAPTER:COPPER SWEAT, 3/4"ID X3/4"FPT 5 EA 1 3.91 M*0105
670762 ADAPTER:COPPER SWEAT, 3/4"ID X3/4"MPT 4 EA 1 3.88 M*0404
671065 ADAPTER:COPPER SWEAT,1 1/4" X MPT 0 EA 1 6.45 M*0207
285000 ADAPTER:PARALLEL 3 TO 2 WIRE 2 EA 1 0.69 60207
670828 ADAPTER:PVC,FEMALE,DWV,SCH40,HUB X FPT, 2" 1 EA 1 1.01 90411
670825 ADAPTER:PVC,FEMALE,SCH 40,HUB X FPT, 1-1/2" 7 EA 1 0.41 V*0306
670822 ADAPTER:PVC,FEMALE,SCH 40,HUB X FPT, 1/2" 0 EA 1 0.16 V*0304
670824 ADAPTER:PVC,FEMALE,SCH 40,HUB X FPT, 1" 10 EA 1 0.17 V*0404
670826 ADAPTER:PVC,FEMALE,SCH 40,HUB X FPT, 2" 12 EA 1 0.76 V*0504
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 1
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
670823 ADAPTER:PVC,FEMALE,SCH 40,HUB X FPT, 3/4" 2 EA 1 0.21 V*0103
670834 ADAPTER:PVC,MALE,DWV,SCH 40,HUB X MPT, 1-1/2" 2 EA 1 0.69 V*0102
670835 ADAPTER:PVC,MALE,DWV,SCH 40,HUB X MPT, 2" 4 EA 1 0.90 V*0202
670832 ADAPTER:PVC,MALE,SCH 40,HUB X MPT, 1-1/2" 0 EA 1 0.44 V*0205
670818 ADAPTER:PVC,MALE,SCH 40,HUB X MPT, 1-1/4" 0 EA 1 1.09 90507
670829 ADAPTER:PVC,MALE,SCH 40,HUB X MPT, 1/2" 1 EA 1 0.17 V*0206
670831 ADAPTER:PVC,MALE,SCH 40,HUB X MPT, 1" 3 EA 1 0.20 V*0206
670830 ADAPTER:PVC,MALE,SCH 40,HUB X MPT, 3/4" 23 EA 1 0.15 V*0104
670896 ADAPTER:PVC,MALE,SCH 80,HUB X MPT, 3/4" 9 EA 1 1.74 V*0302
670159 ADAPTER:PVC,1-1/2" FEMALE TRAP,DWV,W/NUT 0 EA 1 0.59 V*0304
659209 ADAPTER:PVC,1-1/2" MALE TRAP,DWV,W/NUT 2 EA 1 0.66 V*0406
740024 ADAPTER:5/32" OR 1/4" X 1/8 BARB/MPT/BRASS 1 PK 10 7.76 80605
910244 ADHESIVE: PITTSELL 727, GLASS SEALER 35 EA 1 5.70 W*0203
910133 ADHESIVE:ARMAFLEX 520, PINT SIZE 17 EA 1 6.65 960202
450093 ADHESIVE:BASEBOARD,RUBBER COVE BASE, 25-30 OZ TUBE 6 EA 1 4.97 S*0602
910246 ADHESIVE:DUCT SEALER,WATER BASED,KINGCO 11-376 9 GAL 1 22.16 810602
450090 ADHESIVE:EXT/INT,STRUCTURAL BONDING,LIQUID NAIL,10.3 OZ, DAP#250 21 TB 1 2.39 U*0303
450091 ADHESIVE:FLOOR TILE,CLEAR,4GAL,THIN-SPREAD,WATER BASE,#M-269 5 EA 4GAL 44.45 800602
910099 ADHESIVE:SPRAY,10-15OZ,RAM TACK57002, 12/CS 7 CS 12 56.58 820501
450094 ADHESIVE:TUFFBOND 2 GAL 1 23.00 960204
445480 AIR COMPRESSOR: ELEC ACTUATED BALL VALVE DRAIN,ADJ TIMER,NEMA 4 0 EA 1 240.64 Q*0101
025001 AIR COMPRESSOR: INTAKE FILTER INSERT,GRAINGER #5Z666 12 EA 1 5.64 80207
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 2
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
025004 AIR COMPRESSOR: LONG INTAKE FILTER,GRAINGER #5A718 6 EA 1 9.46 80105
025003 AIR COMPRESSOR: SHORT INTAKE FILTER,GRAINGER #5A717 1 EA 1 5.87 80207
031005 AIR CONDITIONER:WINDOW UNIT,10,000 BTU,115 VOLT,COOL ONLY 0 EA 1 211.60 800405
031002 AIR CONDITIONER:WINDOW UNIT,18300 BTU,230/208V,COOL/HEAT 0 EA 1 557.75 810503
515218 ALAMO:FLAIL MOWER,#SHD74,BLADES,#100759 1 EA 1 0.99 100410
770025 ALUMINUM COATING:FIBERED,5 GAL PAIL 2 EA 1 43.70 810603
485053 AMMONIA:SUDSY HOUSEHOLD,32 OZ 127 EA 1 1.13 780401
285330 ANCHOR KIT:RED DEVIL,PLASTIC,W/#10-1"PANHEAD SCREWS,1/4"MASONRY 45 KIT 1 4.28 G*0505
282072 ANCHOR:,NAILIN,NYLON BASE,1/4"X 2" 9 BX 100 14.95 D*0105
320002 ANCHOR:NAILIN,NYLON BASE,1/4X1",100/BOX,ANCH4 19 BX 100 14.38 C*0306
320005 ANCHOR:1/4" FOR USE WITH MACHINE BOLTS 0 EA 1 0.33 H*0704
320006 ANCHOR:3/8" FOR USE WITH MACHINE BOLTS 40 EA 1 0.43 H*0704
320001 ANCHOR:5/16", FOR USE WITH MACHINE BOLTS 57 EA 1 0.28 H*0704
ANTIFR ANTIFREEZE: 1 GAL SIZE, AUTOGUARD UNIVERSAL AF,6/CS 0 GAL 1 10.34 960102
770002 ASPHALT:TYPE III, 100# DRUM BY TRUMBULL 2 DR 100# 37.80 800206
670129 AUGER: DRAIN CLEANER/DROP HEAD SEXAUER#078436 5 EA 1 57.30 401703
670131 AUGER: DRAIN REGULAR HEAD SEXAUER#065821, 3/8" X 36" 3 EA 1 41.90 401703
DEXTRON AUTOMATIC TRANSMISSION FLUID: DEXRON 3 36 CAN QT 2.40 960203
MERCRON AUTOMOTIVE TRANSMISSION FLUID:MERCRON 12 QT 1 2.29 960203
910087 BAG:GLOVE,HORIZONTAL,GRAYLING 4460EXT 0 RL 1 194.78 XXXXXX
910088 BAG:GLOVE,VERTICAL,GRAYLING V10 0 RL 1 218.44 XXXXXX
910068 BAG:TRASH,ACM LABELED W/LSU,8 MIL,CLEAR,33"X60" 9 RL 1 87.40 800105
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 3
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
910067 BAG:TRASH,8 MIL,CLEAR,33"X60" 7 RL 1 74.64 780301
640157 BAGS:PAPER 10#, 500/PK,W/THUMB NOTCH 9 PK 500 10.55 780602
640153 BAGS:PAPER 2#, 500/PK,W/THUMB NOTCH 7 PK 500 7.52 780601
640160 BAGS:PAPER 20#, 500/BUNDLE,W/THUMB NOTCH,1000/BALE 4 PK 500 36.94 780601
640161 BAGS:PAPER 25#, 500/BUNDLE,W/THUMB NOTCH 5 PK 500 23.69 780603
640162 BAGS:PAPER 57#,1/6BBL,W/THUMB NOTCH,500/BDL 7 PK 500 28.61 760601
640156 BAGS:PAPER 8#, 500/PK,W/THUMB NOTCH 11 PK 500 11.74 780602
675004 BAIT:GOLDEN MALRIN FLY BAIT 5# 2 CAN 1 27.28 401602
28506003 BALLAST:COMPACT FLUORESCENT 0 EA 1 - XXXXX
28506001 BALLAST:COMPACT FLUORESCENT,2-26,1-26,1-32,1-42WATT,ADV#ICF2S26H 32 EA 1 27.60 K*0502
28506002 BALLAST:COMPACT FLUORESCENT,2-42WATT,ADV# ICF2S42M2LDK 0 EA 1 42.69 K*0603
2850602 BALLAST:ELECTRONIC,120/277/V, 3 OR 4 LAMP,F32T8 97 EA 1 14.94 K*0103
2850601 BALLAST:ELECTRONIC,120/277/V,1 OR 2 LAMP, F32T8 9 EA 1 12.41 K*0403
285094 BALLAST:ELECTRONIC,120V,F72/F96T12,2 LAMPS,UNIVERSAL B260I120RH 12 EA 1 20.64 K*0205
285096 BALLAST:ELECTRONIC,120V,F72/F96T12,2-H/O LAMPS,UNIVERSAL B295SR1 7 EA 1 52.66 K*0304
285095 BALLAST:ELECTRONIC,277V,F72/F96T12,2 LAMPS,UNIVERSAL B260I277RH 4 EA 1 30.04 K*0306
285097 BALLAST:ELECTRONIC,277V,F72/F96T12,2-H/O LAMPS,UNIVERSAL B295SR2 13 EA 1 24.10 K*0202
285023 BALLAST:HIGH PRESSURE SODIUM, 100W,MULTITAP 0 EA 1 45.82 K*0304
285036 BALLAST:HIGH PRESSURE SODIUM, 150W,MULTITAP 5 EA 1 64.14 K*0203
285037 BALLAST:HIGH PRESSURE SODIUM, 250W,MULTITAP,ADV#71A8271-001D 6 EA 1 88.55 K*0304
285026 BALLAST:HIGH PRESSURE SODIUM, 400W,MULTITAP,ADV#71A8473 0 EA 1 132.25 K*0305
285392 BALLAST:HIGH PRESSURE SODIUM, 70W,MULTITAP 0 EA 1 94.01 K*0602
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 4
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
285029 BALLAST:HIGH PRESSURE SODIUM,1000W,MULTITAP,ADVANCE #71A8753 0 EA 1 184.00 K*0303
285004 BALLAST:MERCURY VAPOR,100W,1 LAMP,QUAD VOLT 7 EA 1 32.14 K*0505
285021 BALLAST:METAL HAILDE,1000W,MULTITAP,ADVANCE 71A-6572 1 EA 1 127.27 K*0204
285394 BALLAST:METAL HALIDE,100W,MULTITAP 0 EA 1 73.49 K*0304
285106 BALLAST:METAL HALIDE,1500W,480V,SYLVANIA #47095 0 EA 1 97.80 K*0406
285025A BALLAST:METAL HALIDE,175W,MULTI-TAP,SMALL,ADV#71A5570-001D 5 EA 1 66.03 K*0604
285025 BALLAST:METAL HALIDE,175W,MULTITAP,LARGE,ADV#79W5590-001 10 EA 1 86.25 K*0701
285020 BALLAST:METAL HALIDE,400W,MULTITAP,INDOOR,ADVANCE 71A6091 2 EA 1 93.22 K*0704
285027 BALLAST:METAL HALIDE,400W,MULTITAP,WEATHERPROOF,ADV#79W6091 0 EA 1 293.08 K*0305
285091 BALLAST:USE 2850601 0 EA 1 13.80 800303
285090 BALLAST:USE 2850601 4 EA 1 14.05 K*0504
285092 BALLAST:USE 2850602 0 EA 1 16.85 K*0504
285093 BALLAST:USE 2850602 0 EA 1 18.76 800202
285013 BALLAST:120V,HIGH OUTPUT,2-72/84/96T12/BULBS,UNIV.#480-XLH-TC-P, 7 EA 1 27.01 K*0407
285012 BALLAST:277V,HIGH OUTPUT,2-72/84/96T12/BULBS,UNIV.#487-SLH-TC-P 0 EA 1 46.00 K*0302
285098 BALLAST:277V,4-6-8W,COMPACT FLOURESCENT LAMP,ADV-VLQ106FTP 3 EA 1 19.78 K*0302
450077 BAR:TOUCH SENSE EXIT DEVICE,36"DOOR 7 EA 1 186.51 790403
450001 BATTERY: SIZE "C"(FLASHLIGHT)1.5 VOLT, ALKALINE, RAY-O-VAC 620 EA 1 0.55 CAB*02
450002 BATTERY: SIZE "D"(FLASHLIGHT)1.5 VOLT, ALKALINE, RAY-O-VAC 1415 EA 1 0.63 CAB*01
450006 BATTERY: SIZE AA, 1.5V, ALKALINE, RAY-O-VAC #AL-AA 3197 EA 1 0.23 CAB*03
450007 BATTERY: SIZE AAA, 1.5V, ALKALINE, RAY-O-VAC #AL-AAA 1427 EA 1 0.23 CAB*02
450005 BATTERY: 6 VOLT, SPRING TERMINAL, RAY-O-VAC #WM-20 47 EA 1 1.52 Q*0703
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 5
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
450009 BATTERY: 9 VOLT, ALKALINE, RAY-O-VAC #AL-9V 837 EA 1 0.95 CAB*03
450036 BATTERY:EMERGENCY LIGHT FIXTURE,PE6V7,6VOLT,7AH 9 EA 1 17.25 X*0106
450037 BATTERY:EMERGENCY LIGHT FIXTURE,SLA 4-6,6VOLT,4.5 AH 18 EA 1 14.38 X*0107
540040 BEAD:"L"-BEAD,PERFORATED,METAL,5/8" X 10',F/JOINING SHEETROCK 207 EA 1 2.73 910105
540043 BEAD:CORNER,METAL,8'LGH,FOR SHEETROCK 71 EA 1 1.97 910106
110122 BELT: A 26 V BELT 0 EA 1 7.30 P*0306
110123 BELT: A 27 V BELT 0 EA 1 7.34 P*0403
110272 BELT: A 28 V BELT 0 EA 1 7.49 P*0405
110273 BELT: A 29 V BELT 0 EA 1 3.30 P*0607
110201 BELT: A 31 V BELT 3 EA 1 3.91 P*0305
110203 BELT: A 33 V BELT 0 EA 1 3.52 P*0504
110205 BELT: A 35 V BELT 0 EA 1 3.57 P*0406
110206 BELT: A 36 V BELT 4 EA 1 2.81 P*0105
110207 BELT: A 37 V BELT 0 EA 1 3.82 P*0205
110208 BELT: A 38 V BELT 16 EA 1 2.51 P*0103
110209 BELT: A 39 V BELT 0 EA 1 3.96 80107
110026 BELT: A 40 V BELT 2 EA 1 4.00 P*0705
110211 BELT: A 41 V BELT 2 EA 1 4.08 P*0403
110212 BELT: A 42 V BELT 3 EA 1 5.14 P*0203
110213 BELT: A 43 V BELT 3 EA 1 3.17 P*0307
110215 BELT: A 45 V BELT 0 EA 1 4.35 P*0503
110216 BELT: A 46 V BELT 0 EA 1 2.91 P*0503
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 6
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
110217 BELT: A 47 V BELT 4 EA 1 5.58 P*0105
1100017 BELT: A 48 V BELT 0 EA 1 5.07 P*0308
1100015 BELT: A 48 V BELT 0 EA 1 5.85 P*0502
110221 BELT: A 51 V BELT 7 EA 1 5.23 P*0305
110280 BELT: A 52 V BELT 0 EA 1 4.67 90107
110228 BELT: A 58 V BELT 2 EA 1 6.50 70107
110229 BELT: A 59 V BELT 3 EA 1 3.71 60506
110230 BELT: A 60 V BELT 0 EA 1 6.61 60506
110234 BELT: A 64 V BELT 0 EA 1 5.08 P*0507
110236 BELT: A 66 V BELT 0 EA 1 7.11 P*0503
110245 BELT: A 75 V BELT 0 EA 1 6.07 P*0506
1100016 BELT: A 77 V BELT 4 EA 1 7.11 P*0208
110244 BELT: A 78 V BELT 0 EA 1 6.05 60206
110246 BELT: A 80 V BELT 0 EA 1 6.23 60307
110250 BELT: A 86 V BELT 0 EA 1 6.79 60106
110254 BELT: A 96 V BELT 1 EA 1 6.28 70507
1100003 BELT: A49 V BELT 0 EA 1 5.85 P*0108
1100004 BELT: A53 V BELT 0 EA 1 6.12 P*0203
1100010 BELT: B 162 V BELT 2 EA 1 21.77 P*0606
110025 BELT: B 35 V BELT 1 EA 1 4.62 P*0504
1100014 BELT: B 42 V BELT 0 EA 1 13.28 P*0401
1100013 BELT: B 46 V BELT 0 EA 1 8.20 P*0502
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 7
LOCATION
1
UNIVERSITY
STORES STOCK
NUMBER DESCRIPTION
AVAILABLE
QUANTITY
UNIT OF
MEASURE
NBR IN UNIT
OF
MEASURE
UNIT
PRICE
110308 BELT: B 50 V BELT (MATCHED) 1 EA 1 8.34 P*0507
110318 BELT: B 56 V BELT 0 EA 1 16.28 P*0505
110320 BELT: B 58 V BELT (MATCHED) 0 EA 1 16.48 P*0304
110322 BELT: B 60 V BELT (MATCHED) 0 EA 1 9.46 P*0104
110324 BELT: B 62 V BELT (MATCHED) 0 EA 1 7.48 P*0607
110327 BELT: B 64 V BELT (MATCHED) 0 EA 1 17.42 P*0405
110328 BELT: B 65 V BELT (MATCHED) 13 EA 1 7.77 P*0603
110028 BELT: B 66, V BELT 0 EA 1 10.21 XXXXXX
110329 BELT: B 70 V BELT (MATCHED) 0 EA 1 8.23 P*0607
110330 BELT: B 71 V BELT (MATCHED) 0 EA 1 7.92 P*0202
1100009 BELT: B 72 V BELT 0 EA 1 10.94 P*0605
110332 BELT: B 73 V BELT (MATCHED) 22 EA 1 18.10 P*0107
110334 BELT: B 75 V BELT (MATCHED) 2 EA 1 20.07 P*0106
110338 BELT: B 78 V BELT (MATCHED) 1 EA 1 20.91 P*0307
110339 BELT: B 79 V BELT (MATCHED) 18 EA 1 20.13 P*0207
110340 BELT: B 80 V BELT (MATCHED) 10 EA 1 20.42 P*0303
110341 BELT: B 81 V BELT (MATCHED) 3 EA 1 11.44 P*0505
110343 BELT: B 83 V BELT (MATCHED) 0 EA 1 21.08 P*0606
110345 BELT: B 85 V BELT (MATCHED) 9 EA 1 11.29 P*0206
110350 BELT: B 90 V BELT (MATCHED) 7 EA 1 11.85 P*0204
110351 BELT: B 91 V BELT (MATCHED) 0 EA 1 10.59 60307
110029 BELT: B 93 V BELT (MATCHED) 0 EA 1 13.09 P*0303
8/27/2007 PRICES AND QUANTITIES CORRECT AT TIME OF PRINTING 8
